X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/a14e57f9f7d2e2b3b5d5aa7bf323efe907485408..76ff52f7c9f4e0c33f44e2e3564b74530bab2641:/docs/latex/wx/image.tex?ds=inline diff --git a/docs/latex/wx/image.tex b/docs/latex/wx/image.tex index 3184dd7479..78a3f2f121 100644 --- a/docs/latex/wx/image.tex +++ b/docs/latex/wx/image.tex @@ -6,9 +6,38 @@ can be loaded from a file in a variety of formats, and is extensible to new form via image format handlers. Functions are available to set and get image bits, so it can be used for basic image manipulation. -A wxImage cannot (currently) be drawn directly to a wxDC. Instead, a platform-specific -wxBitmap object must be created from it, and that bitmap drawn on the wxDC, using -wxDC::DrawBitmap. +A wxImage cannot (currently) be drawn directly to a \helpref{wxDC}{wxdc}. Instead, +a platform-specific \helpref{wxBitmap}{wxbitmap} object must be created from it using +the \helpref{ConvertToBitmap}{wximageconverttobitmap} function. This bitmap can then +be drawn in a device context, using \helpref{wxDC::DrawBitmap}{wxdcdrawbitmap}. + +One colour value of the image may be used as a mask colour which will lead to the automatic +creation of a \helpref{wxMask}{wxmask} object associated to the bitmap object. + +\wxheading{Available image handlers} + +The following image handlers are available. {\bf wxBMPHandler} is always +installed by default. To use other image formats, install the appropiate +handler with \helpref{wxImage::AddHandler}{wximageaddhandler} or +\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}. + +\twocolwidtha{5cm}% +\begin{twocollist} +\twocolitem{{\bf \indexit{wxBMPHandler}}}{Only for loading, always installed.} +\twocolitem{{\bf \indexit{wxPNGHandler}}}{For loading and saving.} +\twocolitem{{\bf \indexit{wxJPEGHandler}}}{For loading and saving.} +\twocolitem{{\bf \indexit{wxGIFHandler}}}{Only for loading, due to legal issues.} +\twocolitem{{\bf \indexit{wxPCXHandler}}}{For loading and saving (see below).} +\twocolitem{{\bf \indexit{wxPNMHandler}}}{For loading and saving (see below).} +\twocolitem{{\bf \indexit{wxTIFFHandler}}}{For loading.} +\end{twocollist} + +When saving in PCX format, {\bf wxPCXHandler} will count the number of +different colours in the image; if there are 256 or less colours, it will +save as 8 bit, else it will save as 24 bit. + +Loading PNMs only works for ASCII or raw RGB images. When saving in +PNM format, {\bf wxPNMHandler} will always save as raw RGB. \wxheading{Derived from} @@ -20,7 +49,8 @@ wxDC::DrawBitmap. \wxheading{See also} -\helpref{wxBitmap}{wxbitmap} +\helpref{wxBitmap}{wxbitmap}, +\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers} \latexignore{\rtfignore{\wxheading{Members}}} @@ -44,13 +74,20 @@ and forth without loss in that respect. Creates an image with the given width and height. -\func{}{wxImage}{\param{const wxString\& }{name}, \param{long}{ type = wxBITMAP\_TYPE\_PNG}} +\func{}{wxImage}{\param{int}{ width}, \param{int}{ height}, \param{unsigned char*}{ data}, \param{bool}{ static_data=FALSE}} + +Creates an image from given data with the given width and height. If +{\it static_data} is TRUE, then wxImage will not delete the actual +image data in its destructor, otherwise it will free it by calling +{\it free()}. + +\func{}{wxImage}{\param{const wxString\& }{name}, \param{long}{ type = wxBITMAP\_TYPE\_ANY}} \func{}{wxImage}{\param{const wxString\& }{name}, \param{const wxString\&}{ mimetype}} Loads an image from a file. -\func{}{wxImage}{\param{wxInputStream\& }{stream}, \param{long}{ type = wxBITMAP\_TYPE\_PNG}} +\func{}{wxImage}{\param{wxInputStream\& }{stream}, \param{long}{ type = wxBITMAP\_TYPE\_ANY}} \func{}{wxImage}{\param{wxInputStream\& }{stream}, \param{const wxString\&}{ mimetype}} @@ -62,28 +99,33 @@ Loads an image from an input stream. \docparam{height}{Specifies the height of the image.} -\docparam{name}{This refers to an image filename. Its meaning is determined by the {\it type} parameter.} +\docparam{name}{Name of the file from which to load the image.} -\docparam{stream}{This refers to an input stream. Its meaning is determined by the {\it type} parameter. It is equal to loading from file except that you provide opened stream (file, HTTP or any other custom class).} +\docparam{stream}{Opened input stream from which to load the image. Currently, the stream must support seeking.} \docparam{type}{May be one of the following: \twocolwidtha{5cm}% \begin{twocollist} \twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_BMP}}}{Load a Windows bitmap file.} -\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_PNG}}}{Load a PNG bitmap file.} +\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_GIF}}}{Load a GIF bitmap file.} \twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_JPEG}}}{Load a JPEG bitmap file.} -\end{twocollist} - -The validity of these flags depends on the platform and wxWindows configuration. -If all possible wxWindows settings are used, the loading a BMP (Windows bitmap) file, -a PNG (portable network graphics) file and a JPEG file is supported on all platforms that -implement wxImage.} +\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_PNG}}}{Load a PNG bitmap file.} +\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_PCX}}}{Load a PCX bitmap file.} +\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_PNM}}}{Load a PNM bitmap file.} +\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_TIF}}}{Load a TIFF bitmap file.} +\twocolitem{{\bf \indexit{wxBITMAP\_TYPE\_ANY}}}{Will try to autodetect the format.} +\end{twocollist}} \docparam{mimetype}{MIME type string (for example 'image/jpeg')} -Note : you must call wxImage::AddHandler(new wxJPEGHandler) during application -initialization in order to work with JPEGs. +\wxheading{Remarks} + +Depending on how wxWindows has been configured, not all formats may be available. + +Note: any handler other than BMP must be previously +initialized with \helpref{wxImage::AddHandler}{wximageaddhandler} or +\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}. \wxheading{See also} @@ -91,18 +133,27 @@ initialization in order to work with JPEGs. \pythonnote{Constructors supported by wxPython are:\par \indented{2cm}{\begin{twocollist} -\twocolitem{\bf{wxImage(name, flag)}}{Loads an image from a file} -\twocolitem{\bf{wxNullImage()}}{Create a null image (has no size or +\twocolitem{{\bf wxImage(name, flag)}}{Loads an image from a file} +\twocolitem{{\bf wxNullImage()}}{Create a null image (has no size or image data)} -\twocolitem{\bf{wxEmptyImage(width, height)}}{Creates an empty image +\twocolitem{{\bf wxEmptyImage(width, height)}}{Creates an empty image of the given size} -\twocolitem{\bf{wxImageFromMime(name, mimetype}}{Creates an image from +\twocolitem{{\bf wxImageFromMime(name, mimetype}}{Creates an image from the given file of the given mimetype} -\twocolitem{\bf{wxImageFromBitmap(bitmap)}}{Creates an image from a +\twocolitem{{\bf wxImageFromBitmap(bitmap)}}{Creates an image from a platform-dependent bitmap} \end{twocollist}} } +\perlnote{Constructors supported by wxPerl are:\par +\begin{itemize} +\item{Wx::Image->new( bitmap )} +\item{Wx::Image->new( width, height )} +\item{Wx::Image->new( name, type )} +\item{Wx::Image->new( name, mimetype )} +\end{itemize} +} + \membersection{wxImage::\destruct{wxImage}} \func{}{\destruct{wxImage}}{\void} @@ -122,7 +173,7 @@ of a given handler class in an application session.} \helpref{wxImageHandler}{wximagehandler} -\pythonnote{In wxPython this static method is named \tt{wxImage_AddHandler}.} +\pythonnote{In wxPython this static method is named {\tt wxImage_AddHandler}.} \membersection{wxImage::CleanUpHandlers} \func{static void}{CleanUpHandlers}{\void} @@ -138,9 +189,22 @@ This function is called by wxWindows on exit. Converts the image to a platform-specific bitmap object. This has to be done to actually display an image as you cannot draw an image directly on a window. The resulting bitmap will use the colour depth of the current system which entails -that a (crude) colour reduction has to take place. When in 8-bit mode, this -routine will use a color cube created on program start-up to look up colors. -Still, the image quality won't be perfect for photo images. +that a colour reduction has to take place. + +When in 8-bit mode (PseudoColour mode), the GTK port will use a color cube created +on program start-up to look up colors. This ensures a very fast conversion, but +the image quality won't be perfect (and could be better for photo images using more +sophisticated dithering algorithms). + +On Windows, if there is a palette present (set with SetPalette), it will be used when +creating the wxBitmap (most useful in 8-bit display mode). On other platforms, +the palette is currently ignored. + +\membersection{wxImage::Copy}\label{wximagecopy} + +\constfunc{wxImage}{Copy}{\void} + +Returns an identical copy of the image. \membersection{wxImage::Create}\label{wximagecreate} @@ -258,6 +322,22 @@ Gets the green value of the mask colour. Gets the red value of the mask colour. +\membersection{wxImage::GetPalette}\label{wximagegetpalette} + +\constfunc{const wxPalette\&}{GetPalette}{\void} + +Returns the palette associated with the image. Currently the palette is only +used in ConvertToBitmap under Windows. + +Eventually wxImage handlers will set the palette if one exists in the image file. + +\membersection{wxImage::GetSubImage}\label{wximagegetsubimage} + +\constfunc{wxImage}{GetSubImage}{\param{const wxRect\&}{ rect}} + +Returns a sub image of the current one as long as the rect belongs entirely to +the image. + \membersection{wxImage::GetWidth}\label{wximagegetwidth} \constfunc{int}{GetWidth}{\void} @@ -274,33 +354,59 @@ Gets the width of the image in pixels. Returns TRUE if there is a mask active, FALSE otherwise. -\membersection{wxImage::InitAllHandlers}\label{wximageinitallhandlers} +\membersection{wxImage::GetOption}\label{wximagegetoption} -\func{static void}{InitAllHandlers}{\void} +\constfunc{wxString}{GetOption}{\param{const wxString\&}{ name}} -Adds some common image format handlers, which, depending on wxWindows -configuration, can be handlers for BMP (loading) (always installed), GIF -(loading and saving), PCX (loading and saving), PNM (loading and saving as raw -rgb), PNG (loading and saving), JPEG (loading and saving), file formats. +Gets a user-defined option. The function is case-insensitive to {\it name}. + +For example, when saving as a JPEG file, the option {\bf quality} is +used, which is a number between 0 and 100 (0 is terrible, 100 is very good). \wxheading{See also} -\helpref{wxImageHandler}{wximagehandler} +\helpref{wxImage::SetOption}{wximagesetoption},\rtfsp +\helpref{wxImage::GetOptionInt}{wximagegetoptionint},\rtfsp +\helpref{wxImage::HasOption}{wximagehasoption} + +\membersection{wxImage::GetOptionInt}\label{wximagegetoptionint} + +\constfunc{int}{GetOptionInt}{\param{const wxString\&}{ name}} + +Gets a user-defined option as an integer. The function is case-insensitive to {\it name}. + +\wxheading{See also} + +\helpref{wxImage::SetOption}{wximagesetoption},\rtfsp +\helpref{wxImage::GetOption}{wximagegetoption},\rtfsp +\helpref{wxImage::HasOption}{wximagehasoption} + +\membersection{wxImage::HasOption}\label{wximagehasoption} + +\constfunc{bool}{HasOption}{\param{const wxString\&}{ name}} + +Returns TRUE if the given option is present. The function is case-insensitive to {\it name}. + +\wxheading{See also} + +\helpref{wxImage::SetOption}{wximagesetoption},\rtfsp +\helpref{wxImage::GetOption}{wximagegetoption},\rtfsp +\helpref{wxImage::GetOptionInt}{wximagegetoptionint} \membersection{wxImage::InitStandardHandlers} \func{static void}{InitStandardHandlers}{\void} Internal use only. Adds standard image format handlers. It only install BMP -for the time being, which is use by wxBitmap. +for the time being, which is used by wxBitmap. This function is called by wxWindows on startup, and shouldn't be called by the user. \wxheading{See also} -\helpref{wxImageHandler}{wximagehandler} -\helpref{wxImage::InitAllHandlers}{wximageinitallhandlers} +\helpref{wxImageHandler}{wximagehandler}, +\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers} \membersection{wxImage::InsertHandler} @@ -322,8 +428,7 @@ of a given handler class in an application session.} \func{bool}{LoadFile}{\param{const wxString\&}{ name}, \param{const wxString\&}{ mimetype}} Loads an image from a file. If no handler type is provided, the library will -try to use wxBITMAP\_TYPE\_BMP or all known handlers previously installed -through a call to \helpref{wxImage::InitAllHandlers}{wximageinitallhandlers}. +try to autodetect the format. \func{bool}{LoadFile}{\param{wxInputStream\&}{ stream}, \param{long}{ type}} @@ -333,11 +438,9 @@ Loads an image from an input stream. \wxheading{Parameters} -\docparam{name}{A filename. -The meaning of {\it name} is determined by the {\it type} parameter.} +\docparam{name}{Name of the file from which to load the image.} -\docparam{stream}{An input stream. -The meaning of {\it stream} data is determined by the {\it type} parameter.} +\docparam{stream}{Opened input stream from which to load the image. Currently, the stream must support seeking.} \docparam{type}{One of the following values: @@ -349,12 +452,16 @@ The meaning of {\it stream} data is determined by the {\it type} parameter.} \twocolitem{{\bf wxBITMAP\_TYPE\_PCX}}{Load a PCX image file.} \twocolitem{{\bf wxBITMAP\_TYPE\_PNG}}{Load a PNG image file.} \twocolitem{{\bf wxBITMAP\_TYPE\_PNM}}{Load a PNM image file.} -\end{twocollist} - -The validity of these flags depends on the platform and wxWindows configuration.} +\twocolitem{{\bf wxBITMAP\_TYPE\_TIF}}{Load a TIFF image file.} +\twocolitem{{\bf wxBITMAP\_TYPE\_ANY}}{Will try to autodetect the format.} +\end{twocollist}} \docparam{mimetype}{MIME type string (for example 'image/jpeg')} +\wxheading{Remarks} + +Depending on how wxWindows has been configured, not all formats may be available. + \wxheading{Return value} TRUE if the operation succeeded, FALSE otherwise. @@ -366,13 +473,20 @@ TRUE if the operation succeeded, FALSE otherwise. \pythonnote{In place of a single overloaded method name, wxPython implements the following methods:\par \indented{2cm}{\begin{twocollist} -\twocolitem{\bf{LoadFile(filename, type)}}{Loads an image of the given +\twocolitem{{\bf LoadFile(filename, type)}}{Loads an image of the given type from a file} -\twocolitem{\bf{LoadMimeFile(filename, mimetype)}}{Loads an image of the given +\twocolitem{{\bf LoadMimeFile(filename, mimetype)}}{Loads an image of the given mimetype from a file} \end{twocollist}} } +\perlnote{Methods supported by wxPerl are:\par +\begin{itemize} +\item{\$bitmap->LoadFile( name, type )} +\item{\$bitmap->LoadFile( name, mimetype )} +\end{itemize} +} + \membersection{wxImage::Ok}\label{wximageok} @@ -413,20 +527,19 @@ Saves a image in the given stream. \wxheading{Parameters} -\docparam{name}{A filename. The meaning of {\it name} is determined by the {\it type} parameter.} +\docparam{name}{Name of the file to save the image to.} -\docparam{stream}{An output stream. The meaning of {\it stream} is determined by the {\it type} parameter.} +\docparam{stream}{Opened output stream to save the image to.} -\docparam{type}{Currently two types can be used: +\docparam{type}{Currently three types can be used: \twocolwidtha{5cm}% \begin{twocollist} -\twocolitem{{\bf wxBITMAP\_TYPE\_PNG}}{Save a PNG image file.} \twocolitem{{\bf wxBITMAP\_TYPE\_JPEG}}{Save a JPEG image file.} -\end{twocollist} - -The validity of these flags depends on the platform and wxWindows configuration -as well as user-added handlers.} +\twocolitem{{\bf wxBITMAP\_TYPE\_PNG}}{Save a PNG image file.} +\twocolitem{{\bf wxBITMAP\_TYPE\_PCX}}{Save a PCX image file (tries to save as 8-bit if possible, falls back to 24-bit otherwise).} +\twocolitem{{\bf wxBITMAP\_TYPE\_PNM}}{Save a PNM image file (as raw RGB always).} +\end{twocollist}} \docparam{mimetype}{MIME type.} @@ -445,24 +558,66 @@ Depending on how wxWindows has been configured, not all formats may be available \pythonnote{In place of a single overloaded method name, wxPython implements the following methods:\par \indented{2cm}{\begin{twocollist} -\twocolitem{\bf{SaveFile(filename, type)}}{Saves the image using the given +\twocolitem{{\bf SaveFile(filename, type)}}{Saves the image using the given type to the named file} -\twocolitem{\bf{SaveMimeFile(filename, mimetype)}}{Saves the image using the given +\twocolitem{{\bf SaveMimeFile(filename, mimetype)}}{Saves the image using the given mimetype to the named file} \end{twocollist}} } +\perlnote{Methods supported by wxPerl are:\par +\begin{itemize} +\item{\$bitmap->SaveFile( name, type )} +\item{\$bitmap->SaveFile( name, mimetype )} +\end{itemize} +} + +\membersection{wxImage::Mirror}\label{wximagemirror} + +\constfunc{wxImage}{Mirror}{\param{bool}{ horizontally = TRUE}} + +Returns a mirrored copy of the image. The parameter {\it horizontally} +indicates the orientation. + +\membersection{wxImage::Replace}\label{wximagereplace} + +\func{void}{Replace}{\param{unsigned char}{ r1}, \param{unsigned char}{ g1}, \param{unsigned char}{ b1}, +\param{unsigned char}{ r2}, \param{unsigned char}{ g2}, \param{unsigned char}{ b2}} + +Replaces the colour specified by {\it r1,g1,b1} by the colour {\it r2,g2,b2}. + \membersection{wxImage::Rescale}\label{wximagerescale} -\func{wxImage}{Rescale}{\param{int}{ width}, \param{int}{ height}} +\func{wxImage \&}{Rescale}{\param{int}{ width}, \param{int}{ height}} Changes the size of the image in-place: after a call to this function, the image will have the given width and height. +Returns the (modified) image itself. + \wxheading{See also} \helpref{Scale}{wximagescale} +\membersection{wxImage::Rotate}\label{wximagerotate} + +\func{wxImage}{Rotate}{\param{double}{ angle}, \param{const wxPoint\& }{rotationCentre}, + \param{bool}{ interpolating = TRUE}, \param{wxPoint*}{ offsetAfterRotation = NULL}} + +Rotates the image about the given point, by {\it angle} radians. Passing TRUE +to {\it interpolating} results in better image quality, but is slower. If the +image has a mask, then the mask colour is used for the uncovered pixels in the +rotated image background. Else, black (rgb 0, 0, 0) will be used. + +Returns the rotated image, leaving this image intact. + +\membersection{wxImage::Rotate90}\label{wximagerotate90} + +\constfunc{wxImage}{Rotate90}{\param{bool}{ clockwise = TRUE}} + +Returns a copy of the image rotated 90 degrees in the direction +indicated by {\it clockwise}. + \membersection{wxImage::Scale}\label{wximagescale} \constfunc{wxImage}{Scale}{\param{int}{ width}, \param{int}{ height}} @@ -471,8 +626,8 @@ Returns a scaled version of the image. This is also useful for scaling bitmaps in general as the only other way to scale bitmaps is to blit a wxMemoryDC into another wxMemoryDC. -NB: although Windows can do such scaling itself but in the GTK port, scaling -bitmaps is done using this routine internally. +It may be mentioned that the GTK port uses this function internally +to scale bitmaps when using mapping modes in wxDC. Example: @@ -497,13 +652,6 @@ Example: \helpref{Rescale}{wximagerescale} -\membersection{wxImage::GetSubImage}\label{wximagegetsubimage} - -\constfunc{wxImage}{GetSubImage}{\param{const wxRect&}{rect}} - -Returns a sub image of the current one as long as the rect belongs entirely to -the image. - \membersection{wxImage::SetData}\label{wximagesetdata} \func{void}{SetData}{\param{unsigned char*}{data}} @@ -524,14 +672,39 @@ Specifies whether there is a mask or not. The area of the mask is determined by Sets the mask colour for this image (and tells the image to use the mask). +\membersection{wxImage::SetOption}\label{wximagesetoption} + +\func{void}{SetOption}{\param{const wxString\&}{ name}, \param{const wxString\&}{ value}} + +\func{void}{SetOption}{\param{const wxString\&}{ name}, \param{int}{ value}} + +Sets a user-defined option. The function is case-insensitive to {\it name}. + +For example, when saving as a JPEG file, the option {\bf quality} is +used, which is a number between 0 and 100 (0 is terrible, 100 is very good). + +\wxheading{See also} + +\helpref{wxImage::GetOption}{wximagegetoption},\rtfsp +\helpref{wxImage::GetOptionInt}{wximagegetoptionint},\rtfsp +\helpref{wxImage::HasOption}{wximagehasoption} + +\membersection{wxImage::SetPalette}\label{wximagesetpalette} + +\func{void}{SetPalette}{\param{const wxPalette\&}{ palette}} + +Associates a palette with the image. The palette may be used in ConvertToBitmap (MSW only at present) +or in file save operations (none as yet). + \membersection{wxImage::SetRGB}\label{wximagesetrgb} -\func{void}{SetRGB}{\param{int }{x}, \param{int }{y}, \param{unsigned char }{red}, \param{unsigned char }{blue}, \param{unsigned char }{green}} +\func{void}{SetRGB}{\param{int }{x}, \param{int }{y}, \param{unsigned char }{red}, \param{unsigned char }{green}, \param{unsigned char }{blue}} Sets the pixel at the given coordinate. This routine performs bounds-checks for the coordinate so it can be considered a safe way to manipulate the data, but in some cases this might be too slow so that the data will have to -be set directly. In that case you have to get that data by calling GetData(). +be set directly. In that case you will have to get access to the image data +using the \helpref{GetData}{wximagegetdata} method. \membersection{wxImage::operator $=$} @@ -605,7 +778,8 @@ created by IJG.) \wxheading{See also} -\helpref{wxImage}{wximage} +\helpref{wxImage}{wximage}, +\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers} \latexignore{\rtfignore{\wxheading{Members}}} @@ -634,6 +808,20 @@ Gets the name of this handler. Gets the file extension associated with this handler. +\membersection{wxImageHandler::GetImageCount}\label{wximagehandlergetimagecount} + +\func{int}{GetImageCount}{\param{wxInputStream\&}{ stream}} + +If the image file contains more than one image and the image handler is capable +of retrieving these individually, this function will return the number of +available images. + +\docparam{stream}{Opened input stream for reading image data. Currently, the stream must support seeking.} + +\wxheading{Return value} + +Number of available images. For most image handles, this defaults to 1. + \membersection{wxImageHandler::GetType} \constfunc{long}{GetType}{\void} @@ -648,16 +836,21 @@ Gets the MIME type associated with this handler. \membersection{wxImageHandler::LoadFile}\label{wximagehandlerloadfile} -\func{bool}{LoadFile}{\param{wxImage* }{image}, \param{wxInputStream\&}{ stream}} +\func{bool}{LoadFile}{\param{wxImage* }{image}, \param{wxInputStream\&}{ stream}, \param{bool}{ verbose=TRUE}, \param{int}{ index=0}} -Loads a image from a stream, putting the resulting data into {\it image}. +Loads a image from a stream, putting the resulting data into {\it image}. If the image file contains +more than one image and the image handler is capable of retrieving these individually, {\it index} +indicates which image to read from the stream. \wxheading{Parameters} \docparam{image}{The image object which is to be affected by this operation.} -\docparam{stream}{Opened input stream. -The meaning of {\it stream} is determined by the {\it type} parameter.} +\docparam{stream}{Opened input stream for reading image data.} + +\docparam{verbose}{If set to TRUE, errors reported by the image handler will produce wxLogMessages.} + +\docparam{index}{The index of the image in the file (starting from zero).} \wxheading{Return value} @@ -665,8 +858,8 @@ TRUE if the operation succeeded, FALSE otherwise. \wxheading{See also} -\helpref{wxImage::LoadFile}{wximageloadfile}\\ -\helpref{wxImage::SaveFile}{wximagesavefile}\\ +\helpref{wxImage::LoadFile}{wximageloadfile}, +\helpref{wxImage::SaveFile}{wximagesavefile}, \helpref{wxImageHandler::SaveFile}{wximagehandlersavefile} \membersection{wxImageHandler::SaveFile}\label{wximagehandlersavefile} @@ -679,7 +872,7 @@ Saves a image in the output stream. \docparam{image}{The image object which is to be affected by this operation.} -\docparam{stream}{A stream. The meaning of {\it stream} is determined by the {\it type} parameter.} +\docparam{stream}{Opened output stream for writing the data.} \wxheading{Return value} @@ -687,8 +880,8 @@ TRUE if the operation succeeded, FALSE otherwise. \wxheading{See also} -\helpref{wxImage::LoadFile}{wximageloadfile}\\ -\helpref{wxImage::SaveFile}{wximagesavefile}\\ +\helpref{wxImage::LoadFile}{wximageloadfile}, +\helpref{wxImage::SaveFile}{wximagesavefile}, \helpref{wxImageHandler::LoadFile}{wximagehandlerloadfile} \membersection{wxImageHandler::SetName} @@ -711,24 +904,23 @@ Sets the handler extension. \docparam{extension}{Handler extension.} -\membersection{wxImageHandler::SetType} +\membersection{wxImageHandler::SetMimeType}\label{wximagehandlersetmimetype} -\func{void}{SetType}{\param{long }{type}} +\func{void}{SetMimeType}{\param{const wxString\& }{mimetype}} -Sets the handler type. +Sets the handler MIME type. \wxheading{Parameters} -\docparam{name}{Handler type.} - +\docparam{mimename}{Handler MIME type.} -\membersection{wxImageHandler::SetMimeType} +\membersection{wxImageHandler::SetType} -\func{void}{SetMimeType}{\param{const wxString\& }{mimetype}} +\func{void}{SetType}{\param{long }{type}} -Sets the handler MIME type. +Sets the handler type. \wxheading{Parameters} -\docparam{mimename}{Handler MIME type.} +\docparam{name}{Handler type.}