X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/a0e9a5dfdeebc1d5e2d7e6e2146e63a26c8645a1..0c46625036e3dfb9613aae310f72a00590530689:/interface/wx/event.h diff --git a/interface/wx/event.h b/interface/wx/event.h index 0ee5e39f3f..64adc9862e 100644 --- a/interface/wx/event.h +++ b/interface/wx/event.h @@ -4,7 +4,7 @@ // wxEvent-derived classes // Author: wxWidgets team // RCS-ID: $Id$ -// Licence: wxWindows license +// Licence: wxWindows licence ///////////////////////////////////////////////////////////////////////////// /** @@ -1179,60 +1179,121 @@ enum wxKeyCategoryFlags /** @class wxKeyEvent - This event class contains information about keypress (character) events. - - Notice that there are three different kinds of keyboard events in wxWidgets: - key down and up events and char events. The difference between the first two - is clear - the first corresponds to a key press and the second to a key - release - otherwise they are identical. Just note that if the key is - maintained in a pressed state you will typically get a lot of (automatically - generated) down events but only one up so it is wrong to assume that there is - one up event corresponding to each down one. - - Both key events provide untranslated key codes while the char event carries - the translated one. The untranslated code for alphanumeric keys is always - an upper case value. For the other keys it is one of @c WXK_XXX values - from the ::wxKeyCode enumeration. - The translated key is, in general, the character the user expects to appear - as the result of the key combination when typing the text into a text entry - zone, for example. - - A few examples to clarify this (all assume that CAPS LOCK is unpressed - and the standard US keyboard): when the @c 'A' key is pressed, the key down - event key code is equal to @c ASCII A == 65. But the char event key code - is @c ASCII a == 97. On the other hand, if you press both SHIFT and - @c 'A' keys simultaneously , the key code in key down event will still be - just @c 'A' while the char event key code parameter will now be @c 'A' - as well. - - Although in this simple case it is clear that the correct key code could be - found in the key down event handler by checking the value returned by - wxKeyEvent::ShiftDown(), in general you should use @c EVT_CHAR for this as - for non-alphanumeric keys the translation is keyboard-layout dependent and - can only be done properly by the system itself. - - Another kind of translation is done when the control key is pressed: for - example, for CTRL-A key press the key down event still carries the - same key code @c 'a' as usual but the char event will have key code of 1, - the ASCII value of this key combination. - - You may discover how the other keys on your system behave interactively by - running the @ref page_samples_text wxWidgets sample and pressing some keys - in any of the text controls shown in it. - - @b Tip: be sure to call @c event.Skip() for events that you don't process in - key event function, otherwise menu shortcuts may cease to work under Windows. + This event class contains information about key press and release events. + + The main information carried by this event is the key being pressed or + released. It can be accessed using either GetKeyCode() function or + GetUnicodeKey(). For the printable characters, the latter should be used as + it works for any keys, including non-Latin-1 characters that can be entered + when using national keyboard layouts. GetKeyCode() should be used to handle + special characters (such as cursor arrows keys or @c HOME or @c INS and so + on) which correspond to ::wxKeyCode enum elements above the @c WXK_START + constant. While GetKeyCode() also returns the character code for Latin-1 + keys for compatibility, it doesn't work for Unicode characters in general + and will return @c WXK_NONE for any non-Latin-1 ones. For this reason, it's + recommended to always use GetUnicodeKey() and only fall back to GetKeyCode() + if GetUnicodeKey() returned @c WXK_NONE meaning that the event corresponds + to a non-printable special keys. + + While both of these functions can be used with the events of @c + wxEVT_KEY_DOWN, @c wxEVT_KEY_UP and @c wxEVT_CHAR types, the values + returned by them are different for the first two events and the last one. + For the latter, the key returned corresponds to the character that would + appear in e.g. a text zone if the user pressed the key in it. As such, its + value depends on the current state of the Shift key and, for the letters, + on the state of Caps Lock modifier. For example, if @c A key is pressed + without Shift being held down, wxKeyEvent of type @c wxEVT_CHAR generated + for this key press will return (from either GetKeyCode() or GetUnicodeKey() + as their meanings coincide for ASCII characters) key code of 97 + corresponding the ASCII value of @c a. And if the same key is pressed but + with Shift being held (or Caps Lock being active), then the key could would + be 65, i.e. ASCII value of capital @c A. + + However for the key down and up events the returned key code will instead + be @c A independently of the state of the modifier keys i.e. it depends + only on physical key being pressed and is not translated to its logical + representation using the current keyboard state. Such untranslated key + codes are defined as follows: + - For the letters they correspond to the @e upper case value of the + letter. + - For the other alphanumeric keys (e.g. @c 7 or @c +), the untranslated + key code corresponds to the character produced by the key when it is + pressed without Shift. E.g. in standard US keyboard layout the + untranslated key code for the key @c =/+ in the upper right corner of + the keyboard is 61 which is the ASCII value of @c =. + - For the rest of the keys (i.e. special non-printable keys) it is the + same as the normal key code as no translation is used anyhow. + + Notice that the first rule applies to all Unicode letters, not just the + usual Latin-1 ones. However for non-Latin-1 letters only GetUnicodeKey() + can be used to retrieve the key code as GetKeyCode() just returns @c + WXK_NONE in this case. + + To summarize: you should handle @c wxEVT_CHAR if you need the translated + key and @c wxEVT_KEY_DOWN if you only need the value of the key itself, + independent of the current keyboard state. + + @note Not all key down events may be generated by the user. As an example, + @c wxEVT_KEY_DOWN with @c = key code can be generated using the + standard US keyboard layout but not using the German one because the @c + = key corresponds to Shift-0 key combination in this layout and the key + code for it is @c 0, not @c =. Because of this you should avoid + requiring your users to type key events that might be impossible to + enter on their keyboard. + + + Another difference between key and char events is that another kind of + translation is done for the latter ones when the Control key is pressed: + char events for ASCII letters in this case carry codes corresponding to the + ASCII value of Ctrl-Latter, i.e. 1 for Ctrl-A, 2 for Ctrl-B and so on until + 26 for Ctrl-Z. This is convenient for terminal-like applications and can be + completely ignored by all the other ones (if you need to handle Ctrl-A it + is probably a better idea to use the key event rather than the char one). + Notice that currently no translation is done for the presses of @c [, @c + \\, @c ], @c ^ and @c _ keys which might be mapped to ASCII values from 27 + to 31. + + Finally, modifier keys only generate key events but no char events at all. + The modifiers keys are @c WXK_SHIFT, @c WXK_CONTROL, @c WXK_ALT and various + @c WXK_WINDOWS_XXX from ::wxKeyCode enum. + + Modifier keys events are special in one additional aspect: usually the + keyboard state associated with a key press is well defined, e.g. + wxKeyboardState::ShiftDown() returns @c true only if the Shift key was held + pressed when the key that generated this event itself was pressed. There is + an ambiguity for the key press events for Shift key itself however. By + convention, it is considered to be already pressed when it is pressed and + already released when it is released. In other words, @c wxEVT_KEY_DOWN + event for the Shift key itself will have @c wxMOD_SHIFT in GetModifiers() + and ShiftDown() will return true while the @c wxEVT_KEY_UP event for Shift + itself will not have @c wxMOD_SHIFT in its modifiers and ShiftDown() will + return false. + + + @b Tip: You may discover the key codes and modifiers generated by all the + keys on your system interactively by running the @ref + page_samples_keyboard wxWidgets sample and pressing some keys in it. @note If a key down (@c EVT_KEY_DOWN) event is caught and the event handler does not call @c event.Skip() then the corresponding char event - (@c EVT_CHAR) will not happen. - This is by design and enables the programs that handle both types of - events to be a bit simpler. + (@c EVT_CHAR) will not happen. This is by design and enables the + programs that handle both types of events to avoid processing the + same key twice. As a consequence, if you do not want to suppress the + @c wxEVT_CHAR events for the keys you handle, always call @c + event.Skip() in your @c wxEVT_KEY_DOWN handler. Not doing may also + prevent accelerators defined using this key from working. + + @note If a key is maintained in a pressed state, you will typically get a + lot of (automatically generated) key down events but only one key up + one at the end when the key is released so it is wrong to assume that + there is one up event corresponding to each down one. @note For Windows programmers: The key and char events in wxWidgets are similar to but slightly different from Windows @c WM_KEYDOWN and @c WM_CHAR events. In particular, Alt-x combination will generate a - char event in wxWidgets (unless it is used as an accelerator). + char event in wxWidgets (unless it is used as an accelerator) and + almost all keys, including ones without ASCII equivalents, generate + char events too. @beginEventTable{wxKeyEvent} @@ -1260,13 +1321,49 @@ public: wxKeyEvent(wxEventType keyEventType = wxEVT_NULL); /** - Returns the virtual key code. ASCII events return normal ASCII values, - while non-ASCII events return values such as @b WXK_LEFT for the left cursor - key. See ::wxKeyCode for a full list of the virtual key codes. + Returns the key code of the key that generated this event. - Note that in Unicode build, the returned value is meaningful only if the - user entered a character that can be represented in current locale's default - charset. You can obtain the corresponding Unicode character using GetUnicodeKey(). + ASCII symbols return normal ASCII values, while events from special + keys such as "left cursor arrow" (@c WXK_LEFT) return values outside of + the ASCII range. See ::wxKeyCode for a full list of the virtual key + codes. + + Note that this method returns a meaningful value only for special + non-alphanumeric keys or if the user entered a character that can be + represented in current locale's default charset. Otherwise, e.g. if the + user enters a Japanese character in a program not using Japanese + locale, this method returns @c WXK_NONE and GetUnicodeKey() should be + used to obtain the corresponding Unicode character. + + Using GetUnicodeKey() is in general the right thing to do if you are + interested in the characters typed by the user, GetKeyCode() should be + only used for special keys (for which GetUnicodeKey() returns @c + WXK_NONE). To handle both kinds of keys you might write: + @code + void MyHandler::OnChar(wxKeyEvent& event) + { + if ( event.GetUnicodeKey() != WXK_NONE ) + { + // It's a printable character + wxLogMessage("You pressed '%c'", event.GetUnicodeKey()); + } + else + { + // It's a special key, deal with all the known ones: + switch ( keycode ) + { + case WXK_LEFT: + case WXK_RIGHT: + ... move cursor ... + break; + + case WXK_F1: + ... give help ... + break; + } + } + } + @endcode */ int GetKeyCode() const; @@ -1289,8 +1386,19 @@ public: //@} /** - Returns the raw key code for this event. This is a platform-dependent scan code - which should only be used in advanced applications. + Returns the raw key code for this event. + + The flags are platform-dependent and should only be used if the + functionality provided by other wxKeyEvent methods is insufficient. + + Under MSW, the raw key code is the value of @c wParam parameter of the + corresponding message. + + Under GTK, the raw key code is the @c keyval field of the corresponding + GDK event. + + Under OS X, the raw key code is the @c keyCode field of the + corresponding NSEvent. @note Currently the raw key codes are not supported by all ports, use @ifdef_ wxHAS_RAW_KEY_CODES to determine if this feature is available. @@ -1298,8 +1406,18 @@ public: wxUint32 GetRawKeyCode() const; /** - Returns the low level key flags for this event. The flags are - platform-dependent and should only be used in advanced applications. + Returns the low level key flags for this event. + + The flags are platform-dependent and should only be used if the + functionality provided by other wxKeyEvent methods is insufficient. + + Under MSW, the raw flags are just the value of @c lParam parameter of + the corresponding message. + + Under GTK, the raw flags contain the @c hardware_keycode field of the + corresponding GDK event. + + Under OS X, the raw flags contain the modifiers state. @note Currently the raw key flags are not supported by all ports, use @ifdef_ wxHAS_RAW_KEY_CODES to determine if this feature is available. @@ -1309,6 +1427,10 @@ public: /** Returns the Unicode character corresponding to this key event. + If the key pressed doesn't have any character value (e.g. a cursor key) + this method will return @c WXK_NONE. In this case you should use + GetKeyCode() to retrieve the value of the key. + This function is only available in Unicode build, i.e. when @c wxUSE_UNICODE is 1. */ @@ -3600,6 +3722,11 @@ public: @class wxShowEvent An event being sent when the window is shown or hidden. + The event is triggered by calls to wxWindow::Show(), and any user + action showing a previously hidden window or vice versa (if allowed by + the current platform and/or window manager). + Notice that the event is not triggered when the application is iconized + (minimized) or restored under wxMSW. Currently only wxMSW, wxGTK and wxOS2 generate such events.