X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/9ca2afd1db318c02c7d1b94a501af39c91e55fcf..7344108e8a129a3f9b4df5ab0f98a1713db03b89:/interface/wx/dataview.h?ds=sidebyside

diff --git a/interface/wx/dataview.h b/interface/wx/dataview.h
index 6ae0a936b1..e45d0fced1 100644
--- a/interface/wx/dataview.h
+++ b/interface/wx/dataview.h
@@ -20,17 +20,26 @@
     wxDataViewModel::GetValue in order to define the data model which acts as an
     interface between your actual data and the wxDataViewCtrl.
 
-    Since you will usually also allow the wxDataViewCtrl to change your data
-    through its graphical interface, you will also have to override
-    wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change
-    to some data has been committed.
+    Note that wxDataViewModel does not define the position or index of any item
+    in the control because different controls might display the same data differently.
+    wxDataViewModel does provide a wxDataViewModel::Compare method which the
+    wxDataViewCtrl may use to sort the data either in conjunction with a column
+    header or without (see wxDataViewModel::HasDefaultCompare).
 
     wxDataViewModel (as indeed the entire wxDataViewCtrl code) is using wxVariant
     to store data and its type in a generic way. wxVariant can be extended to contain
-    almost any data without changes to the original class.
+    almost any data without changes to the original class. To a certain extent,
+    you can use (the somewhat more elegant) wxAny instead of wxVariant as there
+    is code to convert between the two, but it is unclear what impact this will
+    have on performance.
+
+    Since you will usually allow the wxDataViewCtrl to change your data
+    through its graphical interface, you will also have to override
+    wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change
+    to some data has been committed.
 
-    The data that is presented through this data model is expected to change at
-    run-time. You need to inform the data model when a change happened.
+    If the data represented by the model is changed by something else than its
+    associated wxDataViewCtrl, the control has to be notified about the change.
     Depending on what happened you need to call one of the following methods:
     - wxDataViewModel::ValueChanged,
     - wxDataViewModel::ItemAdded,
@@ -44,12 +53,6 @@
     - wxDataViewModel::ItemsDeleted,
     - wxDataViewModel::ItemsChanged.
 
-    Note that wxDataViewModel does not define the position or index of any item
-    in the control because different controls might display the same data differently.
-    wxDataViewModel does provide a wxDataViewModel::Compare method which the
-    wxDataViewCtrl may use to sort the data either in conjunction with a column
-    header or without (see wxDataViewModel::HasDefaultCompare).
-
     This class maintains a list of wxDataViewModelNotifier which link this class
     to the specific implementations on the supported platforms so that e.g. calling
     wxDataViewModel::ValueChanged on this model will just call
@@ -75,6 +78,19 @@
         // add columns now
     @endcode
 
+    A potentially better way to avoid memory leaks is to use wxObjectDataPtr
+    
+    @code
+        wxObjectDataPtr<MyMusicModel> musicModel;
+        
+        wxDataViewCtrl *musicCtrl = new wxDataViewCtrl( this, wxID_ANY );
+        musicModel = new MyMusicModel;
+        m_musicCtrl->AssociateModel( musicModel.get() );
+
+        // add columns now
+    @endcode
+
+
     @library{wxadv}
     @category{dvc}
 */
@@ -151,6 +167,30 @@ public:
     virtual bool GetAttr(const wxDataViewItem& item, unsigned int col,
                          wxDataViewItemAttr& attr) const;
 
+    /**
+        Override this to indicate that the item should be disabled.
+
+        Disabled items are displayed differently (e.g. grayed out) and cannot
+        be interacted with.
+
+        The base class version always returns @true, thus making all items
+        enabled by default.
+
+        @param item
+            The item whose enabled status is requested.
+        @param col
+            The column of the item whose enabled status is requested.
+        @return
+            @true if this item should be enabled, @false otherwise.
+
+        @note Currently disabling items is not supported by the wxOSX/Carbon
+              implementation.
+
+        @since 2.9.2
+    */
+    virtual bool IsEnabled(const wxDataViewItem &item,
+                           unsigned int col) const;
+
     /**
         Override this so the control can query the child items of an item.
         Returns the number of items.
@@ -173,7 +213,7 @@ public:
 
     /**
         Override this to indicate which wxDataViewItem representing the parent
-        of @a item or an invalid wxDataViewItem if the the root item is
+        of @a item or an invalid wxDataViewItem if the root item is
         the parent item.
     */
     virtual wxDataViewItem GetParent(const wxDataViewItem& item) const = 0;
@@ -188,7 +228,7 @@ public:
     /**
         Override this method to indicate if a container item merely acts as a
         headline (or for categorisation) or if it also acts a normal item with
-        entries for futher columns. By default returns @false.
+        entries for further columns. By default returns @false.
     */
     virtual bool HasContainerColumns(const wxDataViewItem& item) const;
 
@@ -233,7 +273,7 @@ public:
     /**
         Call this to inform the model that an item has changed.
 
-        This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+        This will eventually emit a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
         event (in which the column fields will not be set) to the user.
     */
     bool ItemChanged(const wxDataViewItem& item);
@@ -253,7 +293,7 @@ public:
     /**
         Call this to inform the model that several items have changed.
 
-        This will eventually emit wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+        This will eventually emit @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
         events (in which the column fields will not be set) to the user.
     */
     bool ItemsChanged(const wxDataViewItemArray& items);
@@ -294,7 +334,7 @@ public:
         This is also called from wxDataViewCtrl's internal editing code, e.g. when
         editing a text field in the control.
 
-        This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+        This will eventually emit a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
         event to the user.
     */
     virtual bool ValueChanged(const wxDataViewItem& item,
@@ -311,28 +351,17 @@ protected:
 
 
 /**
-    @class wxDataViewIndexListModel
-
-    wxDataViewIndexListModel is a specialized data model which lets you address
-    an item by its position (row) rather than its wxDataViewItem (which you can
-    obtain from this class).
-    This model also provides its own wxDataViewIndexListModel::Compare
-    method which sorts the model's data by the index.
+    @class wxDataViewListModel
 
-    This model is not a virtual model since the control stores each wxDataViewItem.
-    Use wxDataViewVirtualListModel if you need to display millions of items or
-    have other reason to use a virtual control.
+    Base class with abstract API for wxDataViewIndexListModel and
+    wxDataViewVirtualListModel.
 
     @library{wxadv}
     @category{dvc}
 */
-class wxDataViewIndexListModel : public wxDataViewModel
+class wxDataViewListModel : public wxDataViewModel
 {
 public:
-    /**
-        Constructor.
-    */
-    wxDataViewIndexListModel(unsigned int initial_size = 0);
 
     /**
         Destructor.
@@ -344,7 +373,7 @@ public:
     */
     int Compare(const wxDataViewItem& item1,
                 const wxDataViewItem& item2,
-                unsigned int column, bool ascending);
+                unsigned int column, bool ascending) const;
 
     /**
         Override this to indicate that the row has special font attributes.
@@ -367,7 +396,29 @@ public:
                          wxDataViewItemAttr& attr) const;
 
     /**
-        Returns the number of items (i.e. rows) in the list.
+        Override this if you want to disable specific items.
+
+        The base class version always returns @true, thus making all items
+        enabled by default.
+
+        @param row
+            The row of the item whose enabled status is requested.
+        @param col
+            The column of the item whose enabled status is requested.
+        @return
+            @true if the item at this row and column should be enabled,
+            @false otherwise.
+
+        @note See wxDataViewModel::IsEnabled() for the current status of
+              support for disabling the items under different platforms.
+
+        @since 2.9.2
+    */
+    virtual bool IsEnabledByRow(unsigned int row,
+                                unsigned int col) const;
+
+    /**
+        Returns the number of items (or rows) in the list.
     */
     unsigned int GetCount() const;
 
@@ -439,6 +490,34 @@ public:
 };
 
 
+/**
+    @class wxDataViewIndexListModel
+
+    wxDataViewIndexListModel is a specialized data model which lets you address
+    an item by its position (row) rather than its wxDataViewItem (which you can
+    obtain from this class).
+    This model also provides its own wxDataViewIndexListModel::Compare
+    method which sorts the model's data by the index.
+
+    This model is not a virtual model since the control stores each wxDataViewItem.
+    Use wxDataViewVirtualListModel if you need to display millions of items or
+    have other reason to use a virtual control.
+
+    @see wxDataViewListModel for the API.
+    
+    @library{wxadv}
+    @category{dvc}
+*/
+
+class wxDataViewIndexListModel : public wxDataViewListModel
+{
+public:
+    /**
+        Constructor.
+    */
+    wxDataViewIndexListModel(unsigned int initial_size = 0);
+
+};
 
 /**
     @class wxDataViewVirtualListModel
@@ -448,15 +527,15 @@ public:
     the exact same interface as wxDataViewIndexListModel.
     The important difference is that under platforms other than OS X, using this
     model will result in a truly virtual control able to handle millions of items
-    as the control doesn't store any item (a feature not supported by the
-    Carbon API under OS X).
+    as the control doesn't store any item (a feature not supported by OS X).
 
-    @see wxDataViewIndexListModel for the API.
+    @see wxDataViewListModel for the API.
 
     @library{wxadv}
     @category{dvc}
 */
-class wxDataViewVirtualListModel : public wxDataViewModel
+
+class wxDataViewVirtualListModel : public wxDataViewListModel
 {
 public:
     /**
@@ -464,10 +543,6 @@ public:
     */
     wxDataViewVirtualListModel(unsigned int initial_size = 0);
 
-    /**
-        Returns the number of virtual items (i.e. rows) in the list.
-    */
-    unsigned int GetCount() const;
 };
 
 
@@ -502,6 +577,16 @@ public:
     */
     void SetColour(const wxColour& colour);
 
+    /**
+        Call this to set the background colour to use.
+
+        Currently this attribute is only supported in the generic version of
+        wxDataViewCtrl and ignored by the native GTK+ and OS X implementations.
+
+        @since 2.9.4
+    */
+    void SetBackgroundColour(const wxColour& colour);
+
     /**
         Call this to indicate that the item shall be displayed in italic text.
     */
@@ -536,8 +621,9 @@ public:
     /**
         Constructor.
     */
-    wxDataViewItem(void* id = NULL);
+    wxDataViewItem();
     wxDataViewItem(const wxDataViewItem& item);
+    explicit wxDataViewItem(void* id);
     //@}
 
     /**
@@ -552,6 +638,61 @@ public:
 };
 
 
+// ----------------------------------------------------------------------------
+// wxDataViewCtrl flags
+// ----------------------------------------------------------------------------
+
+// size of a wxDataViewRenderer without contents:
+#define wxDVC_DEFAULT_RENDERER_SIZE     20
+
+// the default width of new (text) columns:
+#define wxDVC_DEFAULT_WIDTH             80
+
+// the default width of new toggle columns:
+#define wxDVC_TOGGLE_DEFAULT_WIDTH      30
+
+// the default minimal width of the columns:
+#define wxDVC_DEFAULT_MINWIDTH          30
+
+// The default alignment of wxDataViewRenderers is to take
+// the alignment from the column it owns.
+#define wxDVR_DEFAULT_ALIGNMENT         -1
+
+#define wxDV_SINGLE                  0x0000     // for convenience
+#define wxDV_MULTIPLE                0x0001     // can select multiple items
+
+#define wxDV_NO_HEADER               0x0002     // column titles not visible
+#define wxDV_HORIZ_RULES             0x0004     // light horizontal rules between rows
+#define wxDV_VERT_RULES              0x0008     // light vertical rules between columns
+
+#define wxDV_ROW_LINES               0x0010     // alternating colour in rows
+#define wxDV_VARIABLE_LINE_HEIGHT    0x0020     // variable line height
+
+// events
+
+wxEventType wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED;
+
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSING;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSED;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDING;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDED;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_START_EDITING;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED;
+
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU;
+
+wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICK;
+wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK;
+wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED;
+wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED;
+wxEventType wxEVT_COMMAND_DATAVIEW_CACHE_HINT;
+
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_DROP;
 
 /**
     @class wxDataViewCtrl
@@ -589,6 +730,8 @@ public:
            Multiple selection mode.
     @style{wxDV_ROW_LINES}
            Use alternating colours for rows if supported by platform and theme.
+           Currently only supported by the native GTK and OS X implementations
+           but not by the generic one.
     @style{wxDV_HORIZ_RULES}
            Display fine rules between row if supported.
     @style{wxDV_VERT_RULES}
@@ -604,11 +747,13 @@ public:
     @event{EVT_DATAVIEW_SELECTION_CHANGED(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED event.
     @event{EVT_DATAVIEW_ITEM_ACTIVATED(id, func)}
-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event.
+           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. This event
+           is triggered by double clicking an item or pressing some special key
+           (usually "Enter") when it is focused.
     @event{EVT_DATAVIEW_ITEM_START_EDITING(id, func)}
-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event. This
+           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_START_EDITING event. This
            event can be vetoed in order to prevent editing on an item by item
-           basis. Still experimental.
+           basis.
     @event{EVT_DATAVIEW_ITEM_EDITING_STARTED(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event.
     @event{EVT_DATAVIEW_ITEM_EDITING_DONE(id, func)}
@@ -624,9 +769,13 @@ public:
     @event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED event.
     @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)}
-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event.
+           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event
+           generated when the user right clicks inside the control. Notice that
+           this menu is generated even if the click didn't occur on any valid
+           item, in this case wxDataViewEvent::GetItem() simply returns an
+           invalid item.
     @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)}
-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event.
+           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICK event.
     @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICKED event.
     @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)}
@@ -641,6 +790,11 @@ public:
            Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP event.
     @endEventTable
 
+    Notice that this control doesn't allow to process generic mouse events such
+    as @c wxEVT_LEFT_DOWN in all ports (notably it doesn't work in wxGTK). If
+    you need to handle any mouse events not covered by the ones above, consider
+    using a custom renderer for the cells that must handle them.
+
     @library{wxadv}
     @category{ctrl,dvc}
     @appearance{dataviewctrl.png}
@@ -660,7 +814,8 @@ public:
                    const wxPoint& pos = wxDefaultPosition,
                    const wxSize& size = wxDefaultSize,
                    long style = 0,
-                   const wxValidator& validator = wxDefaultValidator);
+                   const wxValidator& validator = wxDefaultValidator,
+                   const wxString& name = wxDataViewCtrlNameStr);
 
     /**
         Destructor.
@@ -841,13 +996,25 @@ public:
                 const wxPoint& pos = wxDefaultPosition,
                 const wxSize& size = wxDefaultSize,
                 long style = 0,
-                const wxValidator& validator = wxDefaultValidator);
+                const wxValidator& validator = wxDefaultValidator,
+                const wxString& name = wxDataViewCtrlNameStr);
 
     /**
         Deletes given column.
     */
     virtual bool DeleteColumn(wxDataViewColumn* column);
 
+    /**
+        Programmatically starts editing given cell of @a item.
+
+        Doesn't do anything if the item or this column is not editable.
+
+        @note Currently not implemented in wxOSX/Carbon.
+
+        @since 2.9.4
+    */
+    virtual void EditItem(const wxDataViewItem& item, const wxDataViewColumn *column);
+
     /**
        Enable drag operations using the given @a format.
     */
@@ -897,13 +1064,59 @@ public:
     */
     wxDataViewColumn* GetExpanderColumn() const;
 
+    /**
+        Returns the currently focused item.
+
+        This is the item that the keyboard commands apply to. It may be invalid
+        if there is no focus currently.
+
+        This method is mostly useful for the controls with @c wxDV_MULTIPLE
+        style as in the case of single selection it returns the same thing as
+        GetSelection().
+
+        Notice that under all platforms except Mac OS X the currently focused
+        item may be selected or not but under OS X the current item is always
+        selected.
+
+        @see SetCurrentItem(), GetCurrentColumn()
+
+        @since 2.9.2
+     */
+    wxDataViewItem GetCurrentItem() const;
+
+    /**
+        Returns the column that currently has focus.
+
+        If the focus is set to individual cell within the currently focused
+        item (as opposed to being on the item as a whole), then this is the
+        column that the focus is on.
+
+        Returns NULL if no column currently has focus.
+
+        @see GetCurrentItem()
+
+        @since 2.9.4
+     */
+    wxDataViewColumn *GetCurrentColumn() const;
+
     /**
         Returns indentation.
     */
     int GetIndent() const;
 
     /**
-        Returns item rect.
+        Returns item rectangle.
+
+        This method is currently not implemented at all in wxGTK and only
+        implemented for non-@NULL @a col argument in wxOSX. It is fully
+        implemented in the generic version of the control.
+
+        @param item
+            A valid item.
+        @param col
+            If non-@NULL, the rectangle returned corresponds to the
+            intersection of the item with the specified column. If @NULL, the
+            rectangle spans all the columns.
     */
     virtual wxRect GetItemRect(const wxDataViewItem& item,
                                const wxDataViewColumn* col = NULL) const;
@@ -913,13 +1126,35 @@ public:
     */
     wxDataViewModel* GetModel();
 
+    /**
+        Returns the number of currently selected items.
+
+        This method may be called for both the controls with single and
+        multiple selections and returns the number of selected item, possibly
+        0, in any case.
+
+        @since 2.9.3
+     */
+    virtual int GetSelectedItemsCount() const;
+
     /**
         Returns first selected item or an invalid item if none is selected.
+
+        This method may be called for both the controls with single and
+        multiple selections but returns an invalid item if more than one item
+        is selected in the latter case, use HasSelection() to determine if
+        there are any selected items when using multiple selection.
     */
     virtual wxDataViewItem GetSelection() const;
 
     /**
         Fills @a sel with currently selected items and returns their number.
+
+        This method may be called for both the controls with single and
+        multiple selections. In the single selection case it returns the array
+        with at most one element in it.
+
+        @see GetSelectedItemsCount()
     */
     virtual int GetSelections(wxDataViewItemArray& sel) const;
 
@@ -929,6 +1164,20 @@ public:
     */
     virtual wxDataViewColumn* GetSortingColumn() const;
 
+    /**
+        Returns true if any items are currently selected.
+
+        This method may be called for both the controls with single and
+        multiple selections.
+
+        Calling this method is equivalent to calling GetSelectedItemsCount()
+        and comparing its result with 0 but is more clear and might also be
+        implemented more efficiently in the future.
+
+        @since 2.9.3
+     */
+    bool HasSelection() const;
+
     /**
         Hittest.
     */
@@ -947,6 +1196,10 @@ public:
 
     /**
         Select the given item.
+
+        In single selection mode this changes the (unique) currently selected
+        item. In multi selection mode, the @a item is selected and the
+        previously selected items remain selected.
     */
     virtual void Select(const wxDataViewItem& item);
 
@@ -961,7 +1214,26 @@ public:
     void SetExpanderColumn(wxDataViewColumn* col);
 
     /**
-        Sets the indendation.
+        Changes the currently focused item.
+
+        The @a item parameter must be valid, there is no way to remove the
+        current item from the control.
+
+        In single selection mode, calling this method is the same as calling
+        Select() and is thus not very useful. In multiple selection mode this
+        method only moves the current item however without changing the
+        selection except under OS X where the current item is always selected,
+        so calling SetCurrentItem() selects @a item if it hadn't been selected
+        before.
+
+        @see GetCurrentItem()
+
+        @since 2.9.2
+     */
+    void SetCurrentItem(const wxDataViewItem& item);
+
+    /**
+        Sets the indentation.
     */
     void SetIndent(int indent);
 
@@ -980,6 +1252,26 @@ public:
         This method only has effect if multiple selections are allowed.
     */
     virtual void UnselectAll();
+
+    /**
+        Sets the row height.
+
+        This function can only be used when all rows have the same height, i.e.
+        when wxDV_VARIABLE_LINE_HEIGHT flag is not used.
+
+        Currently this is implemented in the generic and native GTK versions
+        only and nothing is done (and @false returned) when using OS X port.
+
+        Also notice that this method can only be used to increase the row
+        height compared with the default one (as determined by the return value
+        of wxDataViewRenderer::GetSize()), if it is set to a too small value
+        then the minimum required by the renderers will be used.
+
+        @return @true if the line height was changed or @false otherwise.
+
+        @since 2.9.2
+    */
+    virtual bool SetRowHeight(int rowHeight);
 };
 
 
@@ -1019,34 +1311,46 @@ public:
 
     /**
         Called by owning model.
+
+        @return Always return @true from this function in derived classes.
     */
     virtual bool ItemAdded(const wxDataViewItem& parent,
                            const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.
+
+        @return Always return @true from this function in derived classes.
     */
     virtual bool ItemChanged(const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.
+
+        @return Always return @true from this function in derived classes.
     */
     virtual bool ItemDeleted(const wxDataViewItem& parent,
                              const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.
+
+        @return Always return @true from this function in derived classes.
     */
     virtual bool ItemsAdded(const wxDataViewItem& parent,
                             const wxDataViewItemArray& items);
 
     /**
         Called by owning model.
+
+        @return Always return @true from this function in derived classes.
     */
     virtual bool ItemsChanged(const wxDataViewItemArray& items);
 
     /**
         Called by owning model.
+
+        @return Always return @true from this function in derived classes.
     */
     virtual bool ItemsDeleted(const wxDataViewItem& parent,
                               const wxDataViewItemArray& items);
@@ -1063,6 +1367,8 @@ public:
 
     /**
         Called by owning model.
+
+        @return Always return @true from this function in derived classes.
     */
     virtual bool ValueChanged(const wxDataViewItem& item, unsigned int col) = 0;
 };
@@ -1073,18 +1379,54 @@ public:
 */
 enum wxDataViewCellMode
 {
+    /**
+        The cell only displays information and cannot be manipulated or
+        otherwise interacted with in any way.
+
+        Note that this doesn't mean that the row being drawn can't be selected,
+        just that a particular element of it cannot be individually modified.
+     */
     wxDATAVIEW_CELL_INERT,
 
     /**
-        Indicates that the user can double click the cell and something will
-        happen (e.g. a window for editing a date will pop up).
+        Indicates that the cell can be @em activated by clicking it or using
+        keyboard.
+
+        Activating a cell is an alternative to showing inline editor when the
+        value can be edited in a simple way that doesn't warrant full editor
+        control. The most typical use of cell activation is toggling the
+        checkbox in wxDataViewToggleRenderer; others would be e.g. an embedded
+        volume slider or a five-star rating column.
+
+        The exact means of activating a cell are platform-dependent, but they
+        are usually similar to those used for inline editing of values.
+        Typically, a cell would be activated by Space or Enter keys or by left
+        mouse click.
+
+        @note Do not confuse this with item activation in wxDataViewCtrl
+              and the wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. That one is
+              used for activating the item (or, to put it differently, the
+              entire row) similarly to analogous messages in wxTreeCtrl and
+              wxListCtrl, and the effect differs (play a song, open a file
+              etc.). Cell activation, on the other hand, is all about
+              interacting with the individual cell.
+
+        @see wxDataViewCustomRenderer::ActivateCell()
     */
     wxDATAVIEW_CELL_ACTIVATABLE,
 
     /**
-        Indicates that the user can edit the data in-place, i.e. an control
-        will show up after a slow click on the cell. This behaviour is best
-        known from changing the filename in most file managers etc.
+        Indicates that the user can edit the data in-place in an inline editor
+        control that will show up when the user wants to edit the cell.
+
+        A typical example of this behaviour is changing the filename in a file
+        managers.
+
+        Editing is typically triggered by slowly double-clicking the cell or by
+        a platform-dependent keyboard shortcut (F2 is typical on Windows, Space
+        and/or Enter is common elsewhere and supported on Windows too).
+
+        @see wxDataViewCustomRenderer::CreateEditorCtrl()
     */
     wxDATAVIEW_CELL_EDITABLE
 };
@@ -1355,12 +1697,15 @@ public:
 
 
 /**
-    @class wxDataViewChoiceRenderer
+    A wxDataViewCtrl renderer using wxChoice control and values of strings in
+    it.
 
     This class is used by wxDataViewCtrl to render choice controls.
     It stores a string so that SetValue() and GetValue() operate
     on a variant holding a string.
 
+    @see wxDataViewChoiceByIndexRenderer
+
     @library{wxadv}
     @category{dvc}
 */
@@ -1379,7 +1724,7 @@ public:
         Returns the choice referred to by index.
     */
     wxString GetChoice(size_t index) const;
-    
+
     /**
         Returns all choices.
     */
@@ -1387,6 +1732,28 @@ public:
 };
 
 
+/**
+    A wxDataViewCtrl renderer using wxChoice control and indexes into it.
+
+    Unlike its base wxDataViewChoiceRenderer class, this one stores the choice
+    index, i.e. an @c int, in the variant used by its SetValue() and
+    GetValue().
+
+    @library{wxadv}
+    @category{dvc}
+*/
+class wxDataViewChoiceByIndexRenderer : public wxDataViewChoiceRenderer
+{
+public:
+    /**
+        The ctor.
+    */
+    wxDataViewChoiceByIndexRenderer( const wxArrayString &choices,
+                              wxDataViewCellMode mode = wxDATAVIEW_CELL_EDITABLE,
+                              int alignment = wxDVR_DEFAULT_ALIGNMENT );
+};
+
+
 /**
     @class wxDataViewDateRenderer
 
@@ -1443,20 +1810,72 @@ public:
     virtual ~wxDataViewCustomRenderer();
 
     /**
-        Override this to react to double clicks or ENTER.
-        This method will only be called in wxDATAVIEW_CELL_ACTIVATABLE mode.
+        Override this to react to cell @em activation. Activating a cell is an
+        alternative to showing inline editor when the value can be edited in a
+        simple way that doesn't warrant full editor control. The most typical
+        use of cell activation is toggling the checkbox in
+        wxDataViewToggleRenderer; others would be e.g. an embedded volume
+        slider or a five-star rating column.
+
+        The exact means of activating a cell are platform-dependent, but they
+        are usually similar to those used for inline editing of values.
+        Typically, a cell would be activated by Space or Enter keys or by left
+        mouse click.
+
+        This method will only be called if the cell has the
+        wxDATAVIEW_CELL_ACTIVATABLE mode.
+
+        @param cell
+            Coordinates of the activated cell's area.
+        @param model
+            The model to manipulate in response.
+        @param item
+            Activated item.
+        @param col
+            Activated column of @a item.
+        @param mouseEvent
+            If the activation was triggered by mouse click, contains the
+            corresponding event. Is @NULL otherwise (for keyboard activation).
+            Mouse coordinates are adjusted to be relative to the cell.
+
+        @since 2.9.3
+
+        @note Do not confuse this method with item activation in wxDataViewCtrl
+              and the wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. That one is
+              used for activating the item (or, to put it differently, the
+              entire row) similarly to analogous messages in wxTreeCtrl and
+              wxListCtrl, and the effect differs (play a song, open a file
+              etc.). Cell activation, on the other hand, is all about
+              interacting with the individual cell.
+
+        @see CreateEditorCtrl()
     */
-    virtual bool Activate( wxRect cell,
-                           wxDataViewModel* model,
-                           const wxDataViewItem & item,
-                           unsigned int col );
+    virtual bool ActivateCell(const wxRect& cell,
+                              wxDataViewModel* model,
+                              const wxDataViewItem & item,
+                              unsigned int col,
+                              const wxMouseEvent *mouseEvent);
 
     /**
         Override this to create the actual editor control once editing
         is about to start.
 
-        @a parent is the parent of the editor control, @a labelRect indicates the
-        position and size of the editor control and @a value is its initial value:
+        This method will only be called if the cell has the
+        wxDATAVIEW_CELL_EDITABLE mode. Editing is typically triggered by slowly
+        double-clicking the cell or by a platform-dependent keyboard shortcut
+        (F2 is typical on Windows, Space and/or Enter is common elsewhere and
+        supported on Windows too).
+
+        @param parent
+            The parent of the editor control.
+        @param labelRect
+            Indicates the position and size of the editor control. The control
+            should be created in place of the cell and @a labelRect should be
+            respected as much as possible.
+        @param value
+            Initial value of the editor.
+
+        An example:
         @code
         {
             long l = value;
@@ -1464,10 +1883,12 @@ public:
                         labelRect.GetTopLeft(), labelRect.GetSize(), 0, 0, 100, l );
         }
         @endcode
+
+        @see ActivateCell()
     */
-    virtual wxControl* CreateEditorCtrl(wxWindow* parent,
-                                        wxRect labelRect,
-                                        const wxVariant& value);
+    virtual wxWindow* CreateEditorCtrl(wxWindow* parent,
+                                       wxRect labelRect,
+                                       const wxVariant& value);
 
     /**
         Return the attribute to be used for rendering.
@@ -1502,7 +1923,7 @@ public:
         }
         @endcode
     */
-    virtual bool GetValueFromEditorCtrl(wxControl* editor,
+    virtual bool GetValueFromEditorCtrl(wxWindow* editor,
                                         wxVariant& value);
 
     /**
@@ -1515,8 +1936,8 @@ public:
         Override this to react to a left click.
         This method will only be called in @c wxDATAVIEW_CELL_ACTIVATABLE mode.
     */
-    virtual bool LeftClick( wxPoint cursor,
-                            wxRect cell,
+    virtual bool LeftClick( const wxPoint& cursor,
+                            const wxRect& cell,
                             wxDataViewModel * model,
                             const wxDataViewItem & item,
                             unsigned int col );
@@ -1540,7 +1961,8 @@ public:
     /**
         Override this to start a drag operation. Not yet supported.
     */
-    virtual bool StartDrag(wxPoint cursor, wxRect cell,
+    virtual bool StartDrag(const wxPoint& cursor,
+                           const wxRect& cell,
                            wxDataViewModel* model,
                            const wxDataViewItem & item,
                            unsigned int col);
@@ -1738,6 +2160,64 @@ public:
     const wxDataViewListStore *GetStore() const;
     //@}
 
+    /**
+        Returns the position of given @e item or wxNOT_FOUND if it's
+        not a valid item.
+
+        @since 2.9.2
+     */
+    int ItemToRow(const wxDataViewItem &item) const;
+
+    /**
+        Returns the wxDataViewItem at the given @e row.
+
+        @since 2.9.2
+     */
+    wxDataViewItem RowToItem(int row) const;
+
+    //@{
+    /**
+        @name Selection handling functions
+     */
+
+    /**
+        Returns index of the selected row or wxNOT_FOUND.
+
+        @see wxDataViewCtrl::GetSelection()
+
+        @since 2.9.2
+     */
+    int GetSelectedRow() const;
+
+    /**
+        Selects given row.
+
+        @see wxDataViewCtrl::Select()
+
+        @since 2.9.2
+     */
+    void SelectRow(unsigned row);
+
+    /**
+        Unselects given row.
+
+        @see wxDataViewCtrl::Unselect()
+
+        @since 2.9.2
+     */
+    void UnselectRow(unsigned row);
+
+    /**
+        Returns true if @a row is selected.
+
+        @see wxDataViewCtrl::IsSelected()
+
+        @since 2.9.2
+     */
+    bool IsRowSelected(unsigned row) const;
+
+    //@}
+
     /**
         @name Column management functions
     */
@@ -1747,7 +2227,7 @@ public:
         Appends a column to the control and additionally appends a
         column to the store with the type string.
     */
-    virtual void AppendColumn( wxDataViewColumn *column );
+    virtual bool AppendColumn( wxDataViewColumn *column );
 
     /**
         Appends a column to the control and additionally appends a
@@ -1803,7 +2283,7 @@ public:
         Inserts a column to the control and additionally inserts a
         column to the store with the type string.
     */
-    virtual void InsertColumn( unsigned int pos, wxDataViewColumn *column );
+    virtual bool InsertColumn( unsigned int pos, wxDataViewColumn *column );
 
     /**
         Inserts a column to the control and additionally inserts a
@@ -1816,7 +2296,7 @@ public:
         Prepends a column to the control and additionally prepends a
         column to the store with the type string.
     */
-    virtual void PrependColumn( wxDataViewColumn *column );
+    virtual bool PrependColumn( wxDataViewColumn *column );
 
     /**
         Prepends a column to the control and additionally prepends a
@@ -1835,17 +2315,17 @@ public:
     /**
         Appends an item (=row) to the control and store.
     */
-    void AppendItem( const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void AppendItem( const wxVector<wxVariant> &values, wxUIntPtr data = NULL );
 
     /**
         Prepends an item (=row) to the control and store.
     */
-    void PrependItem( const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void PrependItem( const wxVector<wxVariant> &values, wxUIntPtr data = NULL );
 
     /**
         Inserts an item (=row) to the control and store.
     */
-    void InsertItem( unsigned int row, const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void InsertItem( unsigned int row, const wxVector<wxVariant> &values, wxUIntPtr data = NULL );
 
     /**
         Delete the row at position @a row.
@@ -1857,6 +2337,22 @@ public:
     */
     void DeleteAllItems();
 
+    /**
+        Returns the number of items (=rows) in the control
+
+        @since 2.9.4
+    */
+    unsigned int GetItemCount() const;
+
+    /**
+        Returns the client data associated with the item.
+
+        @see SetItemData()
+
+        @since 2.9.4
+    */
+    wxUIntPtr GetItemData(const wxDataViewItem& item) const;
+
     /**
          Sets the value in the store and update the control.
     */
@@ -1870,7 +2366,7 @@ public:
     /**
          Sets the value in the store and update the control.
 
-         This method assumes that the a string is stored in respective
+         This method assumes that the string is stored in respective
          column.
     */
     void SetTextValue( const wxString &value, unsigned int row, unsigned int col );
@@ -1878,7 +2374,7 @@ public:
     /**
          Returns the value from the store.
 
-         This method assumes that the a string is stored in respective
+         This method assumes that the string is stored in respective
          column.
     */
     wxString GetTextValue( unsigned int row, unsigned int col ) const;
@@ -1886,7 +2382,7 @@ public:
     /**
          Sets the value in the store and update the control.
 
-         This method assumes that the a boolean value is stored in
+         This method assumes that the boolean value is stored in
          respective column.
     */
     void SetToggleValue( bool value, unsigned int row, unsigned int col );
@@ -1894,11 +2390,24 @@ public:
     /**
          Returns the value from the store.
 
-         This method assumes that the a boolean value is stored in
+         This method assumes that the boolean value is stored in
          respective column.
     */
     bool GetToggleValue( unsigned int row, unsigned int col ) const;
 
+    /**
+        Associates a client data pointer with the given item.
+
+        Notice that the control does @e not take ownership of the pointer for
+        compatibility with wxListCtrl. I.e. it will @e not delete the pointer
+        (if it is a pointer and not a number) itself, it is up to you to do it.
+
+        @see GetItemData()
+
+        @since 2.9.4
+    */
+    void SetItemData(const wxDataViewItem& item, wxUIntPtr data);
+
     //@}
 };
 
@@ -2178,7 +2687,7 @@ public:
         in number and type. No (default) values are filled in
         automatically.
     */
-    void AppendItem( const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void AppendItem( const wxVector<wxVariant> &values, wxUIntPtr data = NULL );
 
     /**
         Prepends an item (=row) and fills it with @a values.
@@ -2187,7 +2696,7 @@ public:
         in number and type. No (default) values are filled in
         automatically.
     */
-    void PrependItem( const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void PrependItem( const wxVector<wxVariant> &values, wxUIntPtr data = NULL );
 
     /**
         Inserts an item (=row) and fills it with @a values.
@@ -2196,7 +2705,7 @@ public:
         in number and type. No (default) values are filled in
         automatically.
     */
-    void InsertItem(  unsigned int row, const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void InsertItem(  unsigned int row, const wxVector<wxVariant> &values, wxUIntPtr data = NULL );
 
     /**
         Delete the item (=row) at position @a pos.
@@ -2209,23 +2718,51 @@ public:
     void DeleteAllItems();
 
     /**
-        Overriden from wxDataViewModel
+        Returns the number of items (=rows) in the control
+
+        @since 2.9.4
+    */
+    unsigned int GetItemCount() const;
+
+    /**
+        Returns the client data associated with the item.
+
+        @see SetItemData()
+
+        @since 2.9.4
+    */
+    wxUIntPtr GetItemData(const wxDataViewItem& item) const;
+
+    /**
+        Overridden from wxDataViewModel
     */
     virtual unsigned int GetColumnCount() const;
 
     /**
-        Overriden from wxDataViewModel
+        Overridden from wxDataViewModel
     */
     virtual wxString GetColumnType( unsigned int col ) const;
 
     /**
-        Overriden from wxDataViewIndexListModel
+        Sets the client data associated with the item.
+
+        Notice that this class does @e not take ownership of the passed in
+        pointer and will not delete it.
+
+        @see GetItemData()
+
+        @since 2.9.4
+    */
+    void SetItemData(const wxDataViewItem& item, wxUIntPtr data);
+
+    /**
+        Overridden from wxDataViewIndexListModel
     */
     virtual void GetValueByRow( wxVariant &value,
                            unsigned int row, unsigned int col ) const;
 
     /**
-        Overriden from wxDataViewIndexListModel
+        Overridden from wxDataViewIndexListModel
     */
     virtual bool SetValueByRow( const wxVariant &value,
                            unsigned int row, unsigned int col );
@@ -2235,7 +2772,7 @@ public:
 /**
     @class wxDataViewTreeStore
 
-    wxDataViewTreeStore is a specialised wxDataViewModel for stroing simple
+    wxDataViewTreeStore is a specialised wxDataViewModel for storing simple
     trees very much like wxTreeCtrl does and it offers a similar API.
 
     This class actually stores the entire tree and the values (therefore its name)
@@ -2297,7 +2834,7 @@ public:
     int GetChildCount(const wxDataViewItem& parent) const;
 
     /**
-        Returns the client data asoociated with the item.
+        Returns the client data associated with the item.
     */
     wxClientData* GetItemData(const wxDataViewItem& item) const;
 
@@ -2447,13 +2984,15 @@ public:
     @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event.
     @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)}
-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event.
+           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICK event.
     @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICKED event.
     @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED event.
     @event{EVT_DATAVIEW_COLUMN_REORDERED(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED event.
+           Currently this even is only generated when using the native OSX
+           version.
     @event{EVT_DATAVIEW_ITEM_BEGIN_DRAG(id, func)}
            Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG event.
     @event{EVT_DATAVIEW_ITEM_DROP_POSSIBLE(id, func)}
@@ -2494,7 +3033,7 @@ public:
     wxDataViewModel* GetModel() const;
 
     /**
-        Returns a the position of a context menu event in screen coordinates.
+        Returns the position of a context menu event in screen coordinates.
     */
     wxPoint GetPosition() const;
 
@@ -2503,13 +3042,33 @@ public:
     */
     const wxVariant& GetValue() const;
 
+    /**
+        Can be used to determine whether the new value is going to be accepted
+        in wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE handler.
+
+        Returns @true if editing the item was cancelled or if the user tried to
+        enter an invalid value (refused by wxDataViewRenderer::Validate()). If
+        this method returns @false, it means that the value in the model is
+        about to be changed to the new one.
+
+        Notice that wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE event handler can
+        call wxNotifyEvent::Veto() to prevent this from happening.
+
+        Currently support for setting this field and for vetoing the change is
+        only available in the generic version of wxDataViewCtrl, i.e. under MSW
+        but not GTK nor OS X.
+
+        @since 2.9.3
+     */
+    bool IsEditCancelled() const;
+
     /**
         Sets the column index associated with this event.
     */
     void SetColumn(int col);
 
     /**
-        For wxEVT_DATAVIEW_COLUMN_HEADER_CLICKED only.
+        For @c wxEVT_DATAVIEW_COLUMN_HEADER_CLICK only.
     */
     void SetDataViewColumn(wxDataViewColumn* col);
 
@@ -2528,41 +3087,55 @@ public:
     */
     void SetDataObject( wxDataObject *obj );
 
-    /**
-        Used internally. Gets associated wxDataObject for data transfer
-        within a drag operation.
-    */
-    wxDataObject *GetDataObject() const;
-
-    /**
-        Used internally. Sets the wxDataFormat during a drop operation.
-    */
-    void SetDataFormat( const wxDataFormat &format );
-
     /**
         Gets the wxDataFormat during a drop operation.
     */
     wxDataFormat GetDataFormat() const;
 
     /**
-        Used internally. Sets the data size for a drop data transfer.
+        Gets the data size for a drop data transfer.
     */
-    void SetDataSize( size_t size );
+    size_t GetDataSize() const;
 
     /**
-        Gets the data size for a drop data transfer.
+        Gets the data buffer for a drop data transfer.
     */
-    size_t GetDataSize() const;
+    void *GetDataBuffer() const;
 
     /**
-        Used internally. Sets the data buffer for a drop data transfer.
+        Specify the kind of the drag operation to perform.
+
+        This method can be used inside a wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG
+        handler in order to configure the drag operation. Valid values are
+        ::wxDrag_CopyOnly (default), ::wxDrag_AllowMove (allow the data to be
+        moved) and ::wxDrag_DefaultMove.
+
+        Currently it is only honoured by the generic version of wxDataViewCtrl
+        (used e.g. under MSW) and not supported by the native GTK and OS X
+        versions.
+
+        @see GetDropEffect()
+
+        @since 2.9.4
     */
-    void SetDataBuffer( void* buf );
+    void SetDragFlags(int flags);
 
     /**
-        Gets the data buffer for a drop data transfer.
+        Returns the effect the user requested to happen to the dropped data.
+
+        This function can be used inside
+        wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE and
+        wxEVT_COMMAND_DATAVIEW_ITEM_DROP handlers and returns whether the user
+        is trying to copy (the return value is ::wxDragCopy) or move (if the
+        return value is ::wxDragMove) the data.
+
+        Currently this is only available when using the generic version of
+        wxDataViewCtrl (used e.g. under MSW) and always returns ::wxDragNone in
+        the GTK and OS X native versions.
+
+        @since 2.9.4
     */
-    void *GetDataBuffer() const;
+    wxDragResult GetDropEffect() const;
 
     /**
         Return the first row that will be displayed.