X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/9a05fd8d137bbe26acd4f86adf6d62c55424822c..7140577b50f951b356cd07393fe970e76eeee88d:/include/wx/msw/setup0.h diff --git a/include/wx/msw/setup0.h b/include/wx/msw/setup0.h index e6bf0100a9..e4a18d95fb 100644 --- a/include/wx/msw/setup0.h +++ b/include/wx/msw/setup0.h @@ -12,13 +12,16 @@ #ifndef _WX_SETUP_H_ #define _WX_SETUP_H_ -/* - * General features - * - */ +// ---------------------------------------------------------------------------- +// global settings +// ---------------------------------------------------------------------------- -#define wxUSE_CONFIG 1 - // Use wxConfig, with CreateConfig in wxApp +// define this to 0 when building wxBase library +#define wxUSE_GUI 1 + +// ---------------------------------------------------------------------------- +// compatibility settings +// ---------------------------------------------------------------------------- #define WXWIN_COMPATIBILITY 0 // Compatibility with 1.68 API. @@ -27,8 +30,107 @@ // the compatibility code is now very minimal so there // is little advantage to setting it to 1. +// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap, +// but this is very dangerous because you can mistakenly pass an icon instead +// of a bitmap to a function taking "const wxBitmap&" - which will *not* work +// because an icon is not a valid bitmap +// +// Starting from 2.1.12, you have the choice under this backwards compatible +// behaviour (your code will still compile, but probably won't behave as +// expected!) and not deriving wxIcon class from wxBitmap, but providing a +// conversion ctor wxBitmap(const wxIcon&) instead. +// +// Recommended setting: 0 +#define wxICON_IS_BITMAP 0 + +// ---------------------------------------------------------------------------- +// non GUI features selection +// ---------------------------------------------------------------------------- + +// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit +// integer which is implemented in terms of native 64 bit integers if any or +// uses emulation otherwise. +// +// This class is required by wxDateTime and so you should enable it if you want +// to use wxDateTime. For most modern platforms, it will use the native 64 bit +// integers in which case (almost) all of its functions are inline and it +// almost does not take any space, so there should be no reason to switch it +// off. +// +// Recommended setting: 1 +#define wxUSE_LONGLONG 1 + +// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which +// allow to manipulate dates, times and time intervals. wxDateTime replaces the +// old wxTime and wxDate classes which are still provided for backwards +// compatibility (and implemented in terms of wxDateTime). +// +// Note that this class is relatively new and is still officially in alpha +// stage because some features are not yet (fully) implemented. It is already +// quite useful though and should only be disabled if you are aiming at +// absolutely minimal version of the library. +// +// Requires: wxUSE_LONGLONG +// +// Recommended setting: 1 +#define wxUSE_TIMEDATE 1 + +// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes +// which allow the application to store its settings in the persistent +// storage. Setting this to 1 will also enable on-demand creation of the +// global config object in wxApp. +// +// See also wxUSE_CONFIG_NATIVE below. +// +// Recommended setting: 1 +#define wxUSE_CONFIG 1 + +// If wxUSE_CONFIG is 1, you may choose to use either the native config +// classes under Windows (using .INI files under Win16 and the registry under +// Win32) or the portable text file format used by the config classes under +// Unix. +// +// Default is 1 to use native classes. Note that you may still use +// wxFileConfig even if you set this to 1 - just the config object created by +// default for the applications needs will be a wxRegConfig or wxIniConfig and +// not wxFileConfig. +// +// Recommended setting: 1 +#define wxUSE_CONFIG_NATIVE 1 + +// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows +// to connect/disconnect from the network and be notified whenever the dial-up +// network connection is established/terminated. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_DIALUP_MANAGER 1 + +// ---------------------------------------------------------------------------- +// Optional controls +// ---------------------------------------------------------------------------- + +// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar +// classes at all. Otherwise, use the native toolbar class unless +// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which +// supports some features which might not be supported by the native wxToolBar +// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1. +// +// Default is 1 for all settings. +// +// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for +// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility). +#define wxUSE_TOOLBAR 1 +#define wxUSE_TOOLBAR_NATIVE 1 +#define wxUSE_TOOLBAR_SIMPLE 1 + +// ---------------------------------------------------------------------------- +// Postscript support settings +// ---------------------------------------------------------------------------- + #define wxUSE_POSTSCRIPT 0 - // 0 for no PostScript device context + // 0 for no PostScript device context #define wxUSE_AFM_FOR_POSTSCRIPT 0 // 1 to use font metric files in GetTextExtent #define wxUSE_METAFILE 1 @@ -43,132 +145,192 @@ #define wxUSE_CONSTRAINTS 1 // 0 for no window layout constraint system -#define wxUSE_TIMEDATE 1 - // 0 for no wxTime/wxDate classes - #define wxUSE_CLIPBOARD 1 // 0 for no clipboard functions #define wxUSE_SPLINES 1 - // 0 for no splines + // 0 for no splines #define wxUSE_DRAG_AND_DROP 1 // 0 for no drag and drop -#define wxUSE_TOOLBAR 1 - // Define 1 to use toolbar classes -#define wxUSE_BUTTONBAR 1 - // Define 1 to use buttonbar classes (enhanced toolbar - // for MS Windows) -#define wxUSE_GAUGE 1 - // Define 1 to use Microsoft's gauge (Windows) - // or Bull's gauge (Motif) library (both in contrib). -#define wxUSE_COMBOBOX 1 - // Define 1 to use COMBOXBOX control (Windows) - // or FWW's ComboBox widget (Motif). -#define wxUSE_RADIOBUTTON 1 - // Define 1 to use radio button control - -#define wxUSE_SCROLLBAR 1 - // Define 1 to compile contributed wxScrollBar class -#define wxUSE_XPM_IN_MSW 1 - // Define 1 to support the XPM package in wxBitmap. +#define wxUSE_BUTTONBAR 1 + // Define 1 to use buttonbar classes (enhanced toolbar + // for MS Windows) +#define wxUSE_GAUGE 1 + // Define 1 to use Microsoft's gauge (Windows) + // or Bull's gauge (Motif) library (both in contrib). +#define wxUSE_COMBOBOX 1 + // Define 1 to use COMBOXBOX control (Windows) + // or FWW's ComboBox widget (Motif). +#define wxUSE_CHOICE 1 + // Define 1 to use CHOICE + +#define wxUSE_RADIOBUTTON 1 + // Define 1 to use radio button control +#define wxUSE_RADIOBTN 1 + // Unfortunately someone introduced this one, too +#define wxUSE_RADIOBOX 1 + // And this... don't know which one is corect + +#define wxUSE_SCROLLBAR 1 + // Define 1 to compile contributed wxScrollBar class + +#define wxUSE_CHECKBOX 1 + // Define 1 to compile checkbox + +#define wxUSE_LISTBOX 1 + // Define 1 to compile listbox + +#define wxUSE_SPINBTN 1 + // Define 1 to compile spin button + +#define wxUSE_SPINCTRL 1 + // Define 1 to use wxSpinCtrl class + +#define wxUSE_STATLINE 1 + // use wxStaticLine class + +#define wxUSE_CHECKLISTBOX 1 + // Define 1 to compile check listbox + +#define wxUSE_CHOICE 1 + // Define 1 to compile choice + +#define wxUSE_CARET 1 + // Define 1 to use wxCaret class + +#define wxUSE_SLIDER 1 + // Define 1 to use wxSlider class + +#define wxUSE_NEW_GRID 1 + // Define 1 to use the new wxGrid class + // (still under development, define 0 to + // use existing wxGrid class) +#define wxUSE_XPM_IN_MSW 1 + // Define 1 to support the XPM package in wxBitmap. #define wxUSE_IMAGE_LOADING_IN_MSW 1 - // Use dynamic DIB loading/saving code in utils/dib under MSW. + // Use dynamic DIB loading/saving code in utils/dib under MSW. #define wxUSE_RESOURCE_LOADING_IN_MSW 1 - // Use dynamic icon/cursor loading/saving code - // under MSW. + // Use dynamic icon/cursor loading/saving code + // under MSW. #define wxUSE_WX_RESOURCES 1 - // Use .wxr resource mechanism (requires PrologIO library) + // Use .wxr resource mechanism (requires PrologIO library) -// BC++/Win16 can't cope with the amount of data in resource.cpp -#if defined(__WIN16__) && defined(__BORLANDC__) -#undef wxUSE_WX_RESOURCES -#define wxUSE_WX_RESOURCES 0 -#endif +#define wxUSE_STARTUP_TIPS 1 + // support for startup tips (wxShowTip &c) #define wxUSE_DOC_VIEW_ARCHITECTURE 1 - // Set to 0 to disable document/view architecture + // Set to 0 to disable document/view architecture +#define wxUSE_MDI_ARCHITECTURE 1 + // Set to 0 to disable MDI document/view architecture #define wxUSE_PRINTING_ARCHITECTURE 1 - // Set to 0 to disable print/preview architecture code + // Set to 0 to disable print/preview architecture code #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 - // Set to 0 to disable PostScript print/preview architecture code - // under Windows (just use Windows printing). + // Set to 0 to disable PostScript print/preview architecture code + // under Windows (just use Windows printing). #define wxUSE_DYNAMIC_CLASSES 1 - // If 1, enables provision of run-time type information. - // NOW MANDATORY: don't change. + // If 1, enables provision of run-time type information. + // NOW MANDATORY: don't change. #define wxUSE_MEMORY_TRACING 1 - // If 1, enables debugging versions of wxObject::new and - // wxObject::delete *IF* __WXDEBUG__ is also defined. - // WARNING: this code may not work with all architectures, especially - // if alignment is an issue. + // If 1, enables debugging versions of wxObject::new and + // wxObject::delete *IF* __WXDEBUG__ is also defined. + // WARNING: this code may not work with all architectures, especially + // if alignment is an issue. #define wxUSE_DEBUG_CONTEXT 1 - // If 1, enables wxDebugContext, for - // writing error messages to file, etc. - // If __WXDEBUG__ is not defined, will still use - // normal memory operators. - // It's recommended to set this to 1, - // since you may well need to output - // an error log in a production - // version (or non-debugging beta) + // If 1, enables wxDebugContext, for + // writing error messages to file, etc. + // If __WXDEBUG__ is not defined, will still use + // normal memory operators. + // It's recommended to set this to 1, + // since you may well need to output + // an error log in a production + // version (or non-debugging beta) #define wxUSE_GLOBAL_MEMORY_OPERATORS 1 - // In debug mode, cause new and delete to be redefined globally. - // If this causes problems (e.g. link errors), set this to 0. + // In debug mode, cause new and delete to be redefined globally. + // If this causes problems (e.g. link errors), set this to 0. #define wxUSE_DEBUG_NEW_ALWAYS 1 - // In debug mode, causes new to be defined to - // be WXDEBUG_NEW (see object.h). - // If this causes problems (e.g. link errors), set this to 0. - // You may need to set this to 0 if using templates (at least - // for VC++). - -#define REMOVE_UNUSED_ARG 1 - // Set this to 0 if your compiler can't cope - // with omission of prototype parameters. - -#define wxUSE_ODBC 1 - // Define 1 to use ODBC classes + // In debug mode, causes new to be defined to + // be WXDEBUG_NEW (see object.h). + // If this causes problems (e.g. link errors), set this to 0. + // You may need to set this to 0 if using templates (at least + // for VC++). + +#define REMOVE_UNUSED_ARG 1 + // Set this to 0 if your compiler can't cope + // with omission of prototype parameters. + +#define wxUSE_ODBC 0 + // Define 1 to use ODBC classes + +#define wxODBC_FWD_ONLY_CURSORS 1 + // Some databases/ODBC drivers only allow forward scrolling cursors. + // Unless you specifically want to use backward scrolling + // cursors, and you know that all of the databases/ODBC drivers + // that you will use these odbc classes with allow backward + // scrolling cursors, this setting should remain set to 1 + // for maximum database/driver compatibilty #ifndef __MWERKS__ #define wxUSE_IOSTREAMH 1 #else #define wxUSE_IOSTREAMH 1 #endif - // VC++ 4.2 and above allows and - // but you can't mix them. Set to 1 for , - // 0 for + // VC++ 4.2 and above allows and + // but you can't mix them. Set to 1 for , + // 0 for #define wxUSE_STREAMS 1 - // If enabled (1), compiles wxWindows streams classes + // If enabled (1), compiles wxWindows streams classes -#define wxUSE_STD_IOSTREAM 1 - // Use standard C++ streams if 1. If 0, use wxWin - // streams implementation. +#define wxUSE_STD_IOSTREAM 0 + // Use standard C++ streams if 1. If 0, use wxWin + // streams implementation. #define wxUSE_WXCONFIG 1 - // if enabled, compiles built-in OS independent wxConfig - // class and it's file (any platform) and registry (Win) - // based implementations + // if enabled, compiles built-in OS independent wxConfig + // class and it's file (any platform) and registry (Win) + // based implementations #define wxUSE_THREADS 1 - // support for multithreaded applications: if - // 1, compile in thread classes (thread.h) - // and make the library thread safe + // support for multithreaded applications: if + // 1, compile in thread classes (thread.h) + // and make the library thread safe #define wxUSE_ZLIB 1 - // Use zlib for compression in streams and PNG code + // Use zlib for compression in streams and PNG code #define wxUSE_LIBPNG 1 - // Use PNG bitmap code -#define wxUSE_LIBJPEG 0 - // Use JPEG bitmap code + // Use PNG bitmap/image code +#define wxUSE_LIBJPEG 1 + // Use JPEG bitmap/image code +#define wxUSE_LIBTIFF 0 + // Use TIFF bitmap/image code +#define wxUSE_GIF 1 + // Use GIF bitmap/image code +#define wxUSE_PNM 1 + // Use PNM bitmap/image code +#define wxUSE_PCX 1 + // Use PCX bitmap/image code #define wxUSE_SERIAL 0 - // Use serialization (requires utils/serialize) + // Use serialization (requires utils/serialize) #define wxUSE_DYNLIB_CLASS 0 - // Compile in wxLibrary class for run-time - // DLL loading and function calling + // Compile in wxLibrary class for run-time + // DLL loading and function calling #define wxUSE_TOOLTIPS 1 - // Define to use wxToolTip class and - // wxWindow::SetToolTip() method + // Define to use wxToolTip class and + // wxWindow::SetToolTip() method #define wxUSE_SOCKETS 1 - // Set to 1 to use socket classes + // Set to 1 to use socket classes +#define wxUSE_HTML 1 + // Set to 1 to use wxHTML sub-library +#define wxUSE_FS_ZIP 1 +#define wxUSE_FS_INET 1 // Set to 1 to enable virtual file systems + +#define wxUSE_BUSYINFO 1 + // wxBusyInfo displays window with message + // when app is busy. Works in same way as + // wxBusyCursor +#define wxUSE_ZIPSTREAM 1 + // input stream for reading from zip archives /* * Finer detail @@ -180,6 +342,39 @@ // will be used to write, in a portable way, // float on the disk +// use wxFile class - required by i18n code, wxConfig and others - recommended +#define wxUSE_FILE 1 + +// use wxTextFile class: requires wxFile, required by wxConfig +#define wxUSE_TEXTFILE 1 + +// i18n support: _() macro, wxLocale class. Requires wxFile +#define wxUSE_INTL 1 + +// wxLogXXX functions - highly recommended +#define wxUSE_LOG 1 + +// wxValidator class +#define wxUSE_VALIDATORS 1 + +// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) +#define wxUSE_ACCEL 1 + +// wxSashWindow class +#define wxUSE_SASH 1 + +// text entry dialog and wxGetTextFromUser function +#define wxUSE_TEXTDLG 1 + +// wxStatusBar class +#define wxUSE_STATUSBAR 1 + +// progress dialog class for lengthy operations +#define wxUSE_PROGRESSDLG 1 + +// wxDirDlg class for getting a directory name from user +#define wxUSE_DIRDLG 1 + /* * MS Windows/Windows NT * @@ -192,43 +387,47 @@ #define wxUSE_CTL3D 0 #else #define wxUSE_CTL3D 1 - // Define 1 to use Microsoft CTL3D library. - // See note above about using FAFA and CTL3D. + // Define 1 to use Microsoft CTL3D library. + // See note above about using FAFA and CTL3D. +#endif + +// can we use RICHEDIT control? +#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__) +#define wxUSE_RICHEDIT 1 +#else +#define wxUSE_RICHEDIT 0 #endif #define wxUSE_COMMON_DIALOGS 1 - // On rare occasions (e.g. using DJGPP) may want - // to omit common dialogs - // (e.g. file selector, printer dialog). - // Switching this off also switches off - // the printing architecture and interactive - // wxPrinterDC. + // On rare occasions (e.g. using DJGPP) may want + // to omit common dialogs + // (e.g. file selector, printer dialog). + // Switching this off also switches off + // the printing architecture and interactive + // wxPrinterDC. #define wxUSE_ITSY_BITSY 1 - // Define 1 to use Microsoft's ItsyBitsy - // small title bar library, for wxMiniFrame + // Define 1 to use Microsoft's ItsyBitsy + // small title bar library, for wxMiniFrame #define wxUSE_BITMAP_MESSAGE 1 - // Define 1 to use bitmap messages. + // Define 1 to use bitmap messages. #define wxUSE_PORTABLE_FONTS_IN_MSW 0 - // Define 1 to use new portable font scheme in Windows - // (used by default under X) + // Define 1 to use new portable font scheme in Windows + // (used by default under X) #define wxFONT_SIZE_COMPATIBILITY 0 - // Define 1 for font size to be backward compatible - // to 1.63 and earlier. 1.64 and later define point - // sizes to be compatible with Windows. + // Define 1 for font size to be backward compatible + // to 1.63 and earlier. 1.64 and later define point + // sizes to be compatible with Windows. #define wxUSE_GENERIC_DIALOGS_IN_MSW 1 - // Define 1 to use generic dialogs in Windows, even though - // they duplicate native common dialog (e.g. wxColourDialog) + // Define 1 to use generic dialogs in Windows, even though + // they duplicate native common dialog (e.g. wxColourDialog) #define wxUSE_PENWINDOWS 0 - // Set to 1 to use PenWindows + // Set to 1 to use PenWindows #define wxUSE_OWNER_DRAWN 1 - // Owner-drawn menus and listboxes + // Owner-drawn menus and listboxes #define wxUSE_NATIVE_STATUSBAR 1 - // Set to 0 to use cross-platform wxStatusBar -#define wxUSE_DBWIN32 1 - // Use Andrew Tucker's OutputDebugString implementation - // (required on Win95 only). See utils.cpp. + // Set to 0 to use cross-platform wxStatusBar /* * Any platform @@ -236,13 +435,19 @@ */ #define wxUSE_TYPEDEFS 0 - // Use typedefs not classes for wxPoint - // and others, to reduce overhead and avoid - // MS C7 memory bug. Bounds checker - // complains about deallocating - // arrays of wxPoints if wxPoint is a class. + // Use typedefs not classes for wxPoint + // and others, to reduce overhead and avoid + // MS C7 memory bug. Bounds checker + // complains about deallocating + // arrays of wxPoints if wxPoint is a class. + +#if defined(__MINGW32__) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) +#ifndef wxUSE_NORLANDER_HEADERS +# define wxUSE_NORLANDER_HEADERS 1 +#endif +#endif -#if (!defined(WIN32) && !defined(__WIN32__)) || defined(__GNUWIN32__) || defined(__BORLANDC__) +#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !defined(wxUSE_NORLANDER_HEADERS)) // Can't use OLE drag and drop in Windows 3.1 because we don't know how // to implement UUIDs // GnuWin32 doesn't have appropriate headers for e.g. IUnknown. @@ -270,9 +475,6 @@ #undef wxUSE_THREADS #define wxUSE_THREADS 0 -#undef wxUSE_DBWIN32 -#define wxUSE_DBWIN32 0 - #undef wxUSE_OWNER_DRAWN #define wxUSE_OWNER_DRAWN 0 #endif @@ -282,27 +484,57 @@ #undef wxUSE_THREADS #define wxUSE_THREADS 0 -#undef wxUSE_DBWIN32 -#define wxUSE_DBWIN32 0 - #undef wxUSE_ODBC #define wxUSE_ODBC 0 #endif -#if defined(__WXMSW__) && defined(__BORLANDC__) +// BC++/Win16 can't cope with the amount of data in resource.cpp +#if defined(__WIN16__) && defined(__BORLANDC__) +#undef wxUSE_WX_RESOURCES +#define wxUSE_WX_RESOURCES 0 + #undef wxUSE_ODBC -#define wxUSE_ODBC 0 +#define wxUSE_ODBC 0 +#endif + +#if defined(__WXMSW__) && defined(__WATCOMC__) +#undef wxUSE_LIBJPEG +#define wxUSE_LIBJPEG 0 #endif #if defined(__WXMSW__) && !defined(__WIN32__) +#undef wxUSE_SOCKETS +#define wxUSE_SOCKETS 0 + #undef wxUSE_THREADS #define wxUSE_THREADS 0 #undef wxUSE_TOOLTIPS #define wxUSE_TOOLTIPS 0 +#undef wxUSE_SPINCTRL +#define wxUSE_SPINCTRL 0 + +#undef wxUSE_SPINBTN +#define wxUSE_SPINBTN 0 + +#undef wxUSE_LIBPNG +#define wxUSE_LIBPNG 0 + +#undef wxUSE_LIBJPEG +#define wxUSE_LIBJPEG 0 + +#undef wxUSE_GIF +#define wxUSE_GIF 0 + +#undef wxUSE_PNM +#define wxUSE_PNM 0 + +#undef wxUSE_PCX +#define wxUSE_PCX 0 + #endif #endif