X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/8e1e6facb70151e7fb26c3731c3d30602a70129d..1bc3fa018039382d373a265f88750f90a10f3623:/docs/gtk/install.txt diff --git a/docs/gtk/install.txt b/docs/gtk/install.txt index cf349ac5c2..ab54619608 100644 --- a/docs/gtk/install.txt +++ b/docs/gtk/install.txt @@ -1,108 +1,132 @@ - !!! When sending bug reports tell us what version of - wxWindows you are using (including the beta) and - what compiler on what system. One example: - wxGTK 2.1 beta 6, egcs 1.1.1, Redhat 5.0 !!! + !!! When sending bug reports tell us what version of wxWindows you are + using (including the beta) and what compiler on what system. One + example: wxGTK 2.3.0, egcs 1.1.1, Redhat 6.2 !!! * The most simple case ----------------------- -If you compile wxWindows on Unix for the first time and don't -like to read install instructions just do (in the base dir): +If you compile wxWindows on Linux for the first time and don't like to read +install instructions just do (in the base dir): -./configure -make -su -make install -ldconfig -exit +> ./configure --with-gtk +> make +> su +> make install +> ldconfig +> exit + +Afterwards you can continue with + +> make +> su +> make install +> ldconfig +> exit If you want to remove wxWindows on Unix you can do this: -su -make uninstall -ldconfif -exit +> su +> make uninstall +> ldconfig +> exit + +* The expert case +----------------- + +If you want to do some more serious cross-platform programming with wxWindows, +such as for GTK and Motif, you can now build two complete libraries and use +them concurretly. For this end, you have to create a directory for each build +of wxWindows - you may also want to create different versions of wxWindows +and test them concurrently. Most typically, this would be a version configured +with --enable-debug_flag and one without. Note, that only one build can currently +be installed, so you'd have to use local version of the library for that purpose. +For building three versions (one GTK, one Motif and a debug version of the GTK +source) you'd do this: + +md buildmotif +cd buildmotif +../configure --with-motif +make +cd .. + +md buildgtk +cd buildgtk +../configure --with-gtk +make +cd .. + +md buildgtkd +cd buildgtkd +../configure --with-gtk --enable-debug_flag +make +cd .. * The most simple errors ------------------------ -configure reports, that you don't have GTK 1.X installed -although you are certainly sure you have. Well, you have -installed it, but you also have another version of the -GTK installed, which you may need to removed including -other versions of glib (and its headers). Also, look -for the PATH variable and check if it includes the path -to the correct gtk-config! The check your LDPATH if -it points to the correct library. There is no way to -compile wxGTK if configure doesn't pass this test as -all this test does is compile and link a GTK program. - -You get errors during compilation: The reason is that you -probably have a broken compiler, which includes almost -everything that is called gcc. If you use gcc 2.8 you -have to disable optimsation as the compiler will give -up with an internal compiler error. - -If there is just any way for you to use egcs, use egcs. -We are sorry, but we cannot fix gcc. - -You get immediate segfault when starting any sample -or application: This is _always_ due to having compiled -the library with different flags or options than your -program. Typically you might have the __WXDEBUG__ option -set for the library but not for your program. +configure reports, that you don't have GTK 1.2 installed although you are +very sure you have. Well, you have installed it, but you also have another +version of the GTK installed, which you may need to remove including other +versions of glib (and its headers). Also, look for the PATH variable and check +if it includes the path to the correct gtk-config! The check your LDPATH if it +points to the correct library. There is no way to compile wxGTK if configure +doesn't pass this test as all this test does is compile and link a GTK program. + +You get errors during compilation: The reason is that you probably have a broken +compiler, which includes almost everything that is called gcc. If you use gcc 2.8 +you have to disable optimsation as the compiler will give up with an internal +compiler error. + +If there is just any way for you to use egcs, use egcs. We cannot fix gcc. + +You get immediate segfault when starting any sample or application: This is either +due to having compiled the library with different flags or options than your program - +typically you might have the __WXDEBUG__ option set for the library but not for your +program - or due to using a broken compiler (and its optimisation) such as GCC 2.8. * The most simple program ------------------------- -Now create your super-application myfoo.app and compile anywhere -with +Now create your super-application myfoo.app and compile anywhere with -g++ myfoo.cpp `wx-config --libs --cflags` -o myfoo +gcc myfoo.cpp `wx-config --libs --cflags` -o myfoo * General ----------------------- -The Unix variants of wxWindows use GNU configure. If you have -problems with your make use GNU make instead. +The Unix variants of wxWindows use GNU configure. If you have problems with your +make use GNU make instead. -If you have general problems with installation, read my -homepage at +If you have general problems with installation, read my homepage at http://wesley.informatik.uni-freiburg.de/~wxxt -for newest information. If you still don't have any success, -please send a bug report to one of our mailing lists (see -my homepage) INCLUDING A DESCRIPTION OF YOUR SYSTEM AND -YOUR PROBLEM, SUCH AS YOUR VERSION OF GTK, WXGTK, WHAT -DISTRIBUTION YOU USE AND WHAT ERROR WAS REPORTED. I know -this has no effect, but I tried... +for newest information. If you still don't have any success, please send a bug +report to one of our mailing lists (see my homepage) INCLUDING A DESCRIPTION OF +YOUR SYSTEM AND YOUR PROBLEM, SUCH AS YOUR VERSION OF GTK, WXGTK, WHAT DISTRIBUTION +YOU USE AND WHAT ERROR WAS REPORTED. I know this has no effect, but I tried... * GUI libraries ----------------------- -wxWindows/GTK requires the GTK+ library to be installed on your system. -It has to be a stable version, preferebly version 1.2.3. You can use -GTK 1.0 in connection with wxWindows, but only without Drag'n'Drop. -wxWindows does work with the 1.1.X versions of the GTK+ library. +wxWindows/GTK requires the GTK+ library to be installed on your system. It has to +be a stable version, preferebly version 1.2.3. + +You can get the newest version of the GTK+ from the GTK homepage at: -You can get the newest version of the GTK+ from the GTK homepage -at http://www.gtk.org -We also mirror GTK+ 1.2.1 at my ftp site soon. You'll find information -about downloading at my homepage. +We also mirror GTK+ 1.2.3 at my ftp site. You'll find information about downloading +at my homepage. * Additional libraries ----------------------- -wxWindows/Gtk requires a thread library and X libraries -known to work with threads. This is the case on all -commercial Unix-Variants and all Linux-Versions that -are based on glibc 2 except RedHat 5.0 which is broken -in many aspects. As of writing this, these Linux -distributions have correct glibc 2 support: +wxWindows/Gtk requires a thread library and X libraries known to work with threads. +This is the case on all commercial Unix-Variants and all Linux-Versions that are +based on glibc 2 except RedHat 5.0 which is broken in many aspects. As of writing +this, these Linux distributions have correct glibc 2 support: - RedHat 5.1 - Debian 2.0 @@ -119,22 +143,49 @@ make install ldconfig exit -NB: DO NOT COMPILE WXGTK WITH GCC AND THREADS, SINCE -ALL PROGRAMS WILL CRASH UPON START-UP! Just always -use egcs and be happy. +NB: DO NOT COMPILE WXGTK WITH GCC 2.7 AND THREADS, SINCE ALL PROGRAMS WILL CRASH UPON +START-UP! Just always use egcs and be happy. -* Create your configuration ------------------------------ +* Building wxGTK on OS/2 +-------------------------- -Usage: - ./configure options +Please send comments and question about the OS/2 installation +to Andrea Venturoli and patches to +the wxWindows mailing list. -If you want to use system's C and C++ compiler, -set environment variables CC and CCC as +You'll need OS/2 Warp (4.00FP#6), X-Free86/2 (3.3.3 or newer), +GTK+ (1.2.5 or newer), emx (0.9d fix 1), flex (2.5.4), yacc (1.8), +korn shell (5.2.13), Autoconf (2.13), GNU file utilities (3.6), +GNU text utilities (1.3), GNU shell utilites (1.12), m4 (1.4), +sed (2.05), grep (2.0), Awk (3.0.3), GNU Make (3.76.1). - % setenv CC cc - % setenv CCC CC - % ./configure options +Open an OS/2 prompt and switch to the directory above. +First set some global environment variables we need: + +SET CXXFLAGS=-Zmtd -D__ST_MT_ERRNO__ +SET CFLAGS=-Zmtd -D__ST_MT_ERRNO__ +SET OSTYPE=OS2X +SET COMSPEC=sh + +Notice you can choose whatever you want, if you don't like OS2X. + +Now, run autoconf in the main directory and in the samples, demos +and utils subdirectory. This will generate the OS/2 specific +versions of the configure scripts. Now run + configure --with-gtk +as described above. + +If you have pthreads library installed, but have a gtk version +which does not yet support threading, you need to explicitly +diable threading by using the option --disable-threads. + +Note that configure assumes your flex will generate files named +"lexyy.c", not "lex.yy.c". If you have a version which does +generate "lex.yy.c", you need to manually change the generated +makefile. + +* Building wxGTK on SGI +-------------------------- Using the SGI native compilers, it is recommended that you also set CFLAGS and CXXFLAGS before running configure. These @@ -151,6 +202,19 @@ untested). The SGI native compiler support has only been tested on Irix 6.5. +* Create your configuration +----------------------------- + +Usage: + ./configure options + +If you want to use system's C and C++ compiler, +set environment variables CC and CCC as + + % setenv CC cc + % setenv CCC CC + % ./configure options + to see all the options please use: ./configure --help @@ -172,45 +236,65 @@ not been defined. And Make in some circumstances as well... * General options ------------------- - !! DON'T USE YET !! +Given below are the commands to change the default behaviour, +i.e. if it says "--disable-threads" it means that threads +are enabled by default. Normally, you won't have to choose a toolkit, because when you download wxGTK, it will default to --with-gtk etc. But if you use all of our CVS repository you have to choose a toolkit. You must do this by running configure with either of: - --with-gtk Use the GIMP ToolKit (GTK) + --without-gtk Don't use the GIMP ToolKit (GTK) --with-motif Use either Motif or Lesstif Configure will look for both. The following options handle the kind of library you want to build. - --with-threads Compile with thread support. Threads - support is also required for the - socket code to work. + --disable-threads Compile without thread support. + + --disable-shared Do not create shared libraries. - --without-shared Do not create shared libraries. + --enable-static Create static libraries. - --without-optimise Do not optimise the code. Can + --disable-optimise Do not optimise the code. Can sometimes be useful for debugging and is required on some architectures such as Sun with gcc 2.8.X which would otherwise produce segvs. - --with-profile Add profiling info to the object - files. Currently broken, I think. + --enable-profile Add profiling info to the object + files. Currently broken, I think. + + --enable-no_rtti Enable compilation without creation of + C++ RTTI information in object files. + This will speed-up compilation and reduce + binary size. + + --enable-no_exceptions Enable compilation without creation of + C++ exception information in object files. + This will speed-up compilation and reduce + binary size. Also fewer crashes during the + actual compilation... - --with-mem_tracing Add built-in memory tracing. + --enable-no_deps Enable compilation without creation of + dependency information. - --with-dmalloc Use the dmalloc memory debugger. + --enable-permissive Enable compilation without creation of + giving erros as soon as you compile with + Solaris' ANSI-defying headers. + + --enable-mem_tracing Add built-in memory tracing. + + --enable-dmalloc Use the dmalloc memory debugger. Read more at www.letters.com/dmalloc/ - --with-debug_info Add debug info to object files and + --enable-debug_info Add debug info to object files and executables for use with debuggers - such as gdb (or its many frontends). + such as gdb (or its many frontends). - --with-debug_flag Define __DEBUG__ and __WXDEBUG__ when + --enable-debug_flag Define __DEBUG__ and __WXDEBUG__ when compiling. This enable wxWindows' very useful internal debugging tricks (such as automatically reporting illegal calls) @@ -221,35 +305,53 @@ The following options handle the kind of library you want to build. * Feature Options ------------------- - !! DON'T USE YET !! - When producing an executable that is linked statically with wxGTK you'll be surprised at its immense size. This can sometimes be drastically reduced by removing features from wxWindows that are not used in your program. The most relevant such features are - --without-libpng Disables PNG image format code. + --with-odbc Enables ODBC code. This is disabled + by default because iODBC is under the + L-GPL license. + + --without-libpng Disables PNG image format code. - --without-libjpeg Disables JPEG image format code. + --without-libjpeg Disables JPEG image format code. - --without-odbc Disables ODBC code. + --without-libtiff Disables TIFF image format code. + + --disable-pnm Disables PNM image format code. - --without-wxresources Disables the use of *.wxr type + --disable-gif Disables GIF image format code. + + --disable-pcx Disables PCX image format code. + + --disable-resources Disables the use of *.wxr type resources. - --without-threads Disables threads. Will also + --disable-threads Disables threads. Will also disable sockets. - --without-sockets Disables sockets. + --disable-sockets Disables sockets. - --without-dnd Disables Drag'n'Drop. + --disable-dnd Disables Drag'n'Drop. + + --disable-clipboard Disables Clipboard. + + --disable-serial Disables object instance serialiasation. + + --disable-streams Disables the wxStream classes. - --without-clipboard Disables Clipboard. + --disable-file Disables the wxFile class. - --without-serial Disables object instance serialiasation. + --disable-textfile Disables the wxTextFile class. - --without-streams Disables the wxStream classes. + --disable-intl Disables the internationalisation. + + --disable-validators Disables validators. + + --disable-accel Disables accel. Apart from disabling certain features you can very often "strip" the program of its debugging information resulting in a significant @@ -267,10 +369,10 @@ the library by typing: make make yourself some coffee, as it will take some time. On an old -386SX possibly week. During compilation, you'll get a few +386SX possibly two weeks. During compilation, you'll get a few warning messages depending in your compiler. -if you want to be more selective, you can change into a specific +If you want to be more selective, you can change into a specific directiry and type "make" there. Then you may install the library and it's header files under @@ -287,24 +389,22 @@ You can remove any traces of wxWindows by typing If you want to save disk space by removing unnecessary object-files: - make clean + make clean in the various directories will do the work for you. * Creating a new Project -------------------------- -There are two ways to create your own project: - 1) The first way uses the installed libraries and header files automatically using wx-config -g++ myfoo.cpp `wx-config --libs` `wx-config --cflags` -o myfoo +gcc myfoo.cpp `wx-config --cflags --libs` -o myfoo Using this way, a make file for the minimal sample would look like this -CC = g++ +CC = gcc minimal: minimal.o $(CC) -o minimal minimal.o `wx-config --libs` @@ -320,177 +420,13 @@ to sitch to tmake. 2) The other way creates a project within the source code directories of wxWindows. For this endeavour, you'll need -the usual number of GNU tools, at least - -GNU automake version 1.4 -GNU autoheader version 2.14 -GNU autoconf version 2.14 +GNU autoconf version 2.14 and add an entry to your Makefile.in +to the bottom of the configure.in script and run autoconf +and configure before you can type make. -and quite possibly - -GNU make -GNU cc - -and if you have all this then you probably know enough to -go ahead yourself :-) - -** Something about Makefiles ------------------------------- - -On general principle it should only contain ONE line, which is as follows: - - include ../../setup/general/makeapp - -this will include all the necessary definitions for creating the applications - -the only case where you might want to add another line is the following: -this version of configure also supports creation of source archives of the -application for easy distribution and updates to newer version of wxWindows. - For this purpose all files in the application-directory will be put into -a gziped tar-file in the full notation user//* -if you want to include some other files that you want "more visible", like -a README. or a shell script for easy -compilation/installation/distribution, then you have to add a variable - - DISTRIBUTE_ADDITIONAL= - -to the Makefile. -So it would look like this: - - DISTRIBUTE_ADDITIONAL=README.TheApp - include ../../setup/general/makeapp - -As we have already talked about distribution the command to create a -distribution is: - - make distrib - -NOTE: If you are in the base directory of wxWindows it will create -distribution packages for wxWindows as well as for all packages in the -user directory. - So if you want to create only packages for the files in user, -then go to the directory other and type: - - make distrib - -or if you only want one application to be created then -enter the specific directory and type there: -make distrib - -All the distribution files will be put in the directory -distrib at the base of the wxWindows-tree (where also configure -and template.mak can be found). - -** Something about Makefile.in --------------------------------- - -As you have already seen with Makefile, configure makes a lot of use -if the include statement in make to keep the Makefiles as simple as -possible. - -So basically there are only variables to define and then a include command. -Exception to this rule is if you have special rules for some stuff... -These rules should go AFTER the include statement!!! - -so the general header looks like this: - - # wxWindows base directory - WXBASEDIR=@WXBASEDIR@ - # set the OS type for compilation - OS=@OS@ - # compile a library only - RULE=bin - -and the general footer will look like this: - - # include the definitions now - include ../../../template.mak - -the key variable is RULE, which defines what make should create -in this directory. - -here are some examples: - - RULE description - =========================================================================== - bin creates a local binary (for a global binary prefix bin with g) - additional variables needed: - BIN_TARGET this gives the name of your application - BIN_OBJ this gives the object files needed to - link the application - optional variables are: - BIN_SRC this gives the list of c/c++ files for - which dependencies will be checked. - (This can be achieved with: make depend) - BIN_LINK this gives commands for additional - libraries needed to link the application - --------------------------------------------------------------------------- - bin2 creates two local binaries (for global binaries prefix bin2 with g) - in addition to the variables specified above you MUST also - provide the same variables with BIN2_ instead of BIN_ - --------------------------------------------------------------------------- - lib creates a local library (for a global binary prefix bin with g) - additional variables needed: - LIB_TARGET this gives the name of your library - LIB_OBJ this gives the object files needed for - the library to be build. - optional variables are: - LIB_SRC this gives the list of c/c++ files for - which dependencies will be checked. - libbin and libgbin are also possible and will need in addition - the variables from bin - --------------------------------------------------------------------------- - gslib is similar to lib, but it creates a shared library if the system - supports it. - additional variables needed: - LIB_MAJOR major number of the shared library - LIB_MINOR minor number of the shared library - --------------------------------------------------------------------------- - other additional variables: - - ADD_COMPILE define additional includes/defines that - are needed to compile the object files - (if you need to reference some directory - utils - like wxGrid -, then please - reference them with the variables defined - in template.mak - e.g.: $(SRCDIR),$(UTILS), - $(SAMPLES),$(OTHERS)) - - NEEDED_DEFINES lists all the defines that HAVE to be set in - /include/wx/setup.h to compile correctly. - - SRC_DIR lists all directories that are needed to - compile. (i.e: lists all the directories, - where there are source-files.) But it is - also needed to clean an object and for - machines, for which make does not support - VPATH - -currently there are the following compiling rules provided: -object files are created for the following file extensions: -.c .cc .cpp - -Please have a closer look at the Makefiles in this distribution. - -* Platforms configure is working with ---------------------------------------- - -Please report build succes on any machine. Especially non- -Linux operating systems (which I don't have). - -Original author of the autoconf system for wxxt-1.66 and for this INSTALL -file: - - Martin Sperl sperl@dsn.ast.univie.ac.at - -Ported to wxGTK 0.1: - - Wolfram Gloger wmglo@dent.med.uni-muenchen.de - -Thanks alot to both of them. +---------------------- In the hope that it will be useful, - Robert Roebling roebling@sun2.ruf.uni-freiburg.de - - + Robert Roebling +