X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/8a82c9ecc9a2cba9727b538c818ebdba243eacbc..d8f2f99ff72b7aa656765799936f0a1038cf3a8b:/include/wx/univ/setup0.h?ds=inline

diff --git a/include/wx/univ/setup0.h b/include/wx/univ/setup0.h
index 85913f7c8b..bfd0e24022 100644
--- a/include/wx/univ/setup0.h
+++ b/include/wx/univ/setup0.h
@@ -26,33 +26,15 @@
 // compatibility settings
 // ----------------------------------------------------------------------------
 
-// This setting determines the compatibility with 1.68 API:
-// Level 0: no backward compatibility, all new features
-// Level 1: some extra methods are defined for compatibility.
-//
-// Default is 0.
-//
-// Recommended setting: 0 (in fact the compatibility code is now very minimal
-// so there is little advantage to setting it to 1.
-#define WXWIN_COMPATIBILITY 0
-
-// This setting determines the compatibility with 2.0 API: set it to 1 to
+// This setting determines the compatibility with 2.4 API: set it to 1 to
 // enable it
 //
 // Default is 0.
 //
 // Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2 0
+#define WXWIN_COMPATIBILITY_2_4 0
 
-// This setting determines the compatibility with 2.0 API: set it to 1 to
-// enable it
-//
-// Default is 0.
-//
-// Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2_2 0
-
-// This setting determines the compatibility with 2.2 API: set it to 0 to
+// This setting determines the compatibility with 2.6 API: set it to 0 to
 // flag all cases of using deprecated functions.
 //
 // Default is 1 but please try building your code with 0 as the default will
@@ -60,15 +42,7 @@
 // in the version after it completely.
 //
 // Recommended setting: 0 (please update your code)
-#define WXWIN_COMPATIBILITY_2_4 1
-
-// Define as 1 for font size to be backward compatible to 1.63 and earlier.
-// 1.64 and later define point sizes to be compatible with Windows.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxFONT_SIZE_COMPATIBILITY 0
+#define WXWIN_COMPATIBILITY_2_6 1
 
 // Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
 // If migrating between versions, your dialogs may seem to shrink.
@@ -85,7 +59,7 @@
 // Generic comment about debugging settings: they are very useful if you don't
 // use any other memory leak detection tools such as Purify/BoundsChecker, but
 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
-// as wxWindows memory debugging subsystem built in since version 5.0 and you
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
 // may prefer to use it instead of built in memory debugging code because it is
 // faster and more fool proof.
 //
@@ -158,7 +132,7 @@
 // Unicode support
 // ----------------------------------------------------------------------------
 
-// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
 // defined as wchar_t, wxString will use Unicode internally. If you set this
 // to 1, you must use wxT() macro for all literal strings in the program.
 //
@@ -169,9 +143,11 @@
 // Default is 0
 //
 // Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
-#define wxUSE_UNICODE 0
+#ifndef wxUSE_UNICODE
+    #define wxUSE_UNICODE 0
+#endif
 
-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
 // and be able to run compiled apps under Windows 9x as well as NT/2000/XP. This
 // setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
 // http://www.microsoft.com/globaldev/Articles/mslu_announce.asp). Note that you
@@ -195,7 +171,7 @@
 // Default is 1
 //
 // Recommended setting: 1 for win32 else 0
-#if defined(__WIN32__)
+#if defined(__WIN32__) || defined(__WATCOMC__)
     #define wxUSE_WCHAR_T 1
 #else
     #define wxUSE_WCHAR_T 0
@@ -205,6 +181,35 @@
 // global features
 // ----------------------------------------------------------------------------
 
+// Compile library in exception-safe mode? If set to 1, the library will try to
+// behave correctly in presence of exceptions (even though it still will not
+// use the exceptions itself) and notify the user code about any unhandled
+// exceptions. If set to 0, propagation of the exceptions through the library
+// code will lead to undefined behaviour -- but the code itself will be
+// slightly smaller and faster.
+//
+// Default is 1
+//
+// Recommended setting: depends on whether you intend to use C++ exceptions
+//                      in your own code (1 if you do, 0 if you don't)
+#define wxUSE_EXCEPTIONS    1
+
+// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
+// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
+// and for wxHashMap to be implemented with templates.
+//
+// Default is 0
+//
+// Recommended setting: YMMV
+#define wxUSE_STL 0
+
+// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_EXTENDED_RTTI 0
+
 // Support for message/error logging. This includes wxLogXXX() functions and
 // wxLog and derived classes. Don't set this to 0 unless you really know what
 // you are doing.
@@ -243,7 +248,7 @@
 // Recommended setting: 0 unless you do plan to develop MT applications
 #define wxUSE_THREADS 1
 
-// If enabled (1), compiles wxWindows streams classes
+// If enabled (1), compiles wxWidgets streams classes
 #define wxUSE_STREAMS 1
 
 // Use standard C++ streams if 1. If 0, use wxWin streams implementation.
@@ -253,6 +258,21 @@
     #define wxUSE_STD_IOSTREAM 0
 #endif
 
+// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
+// Note that if the system's implementation does not support positional
+// parameters, setting this to 1 forces the use of the wxWidgets implementation
+// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
+// many Unix systems but usually doesn't under Windows.
+//
+// Positional parameters are very useful when translating a program since using
+// them in formatting strings allow translators to correctly reorder the
+// translated sentences.
+//
+// Default is 1
+//
+// Recommended setting: 1 if you want to support multiple languages
+#define wxUSE_PRINTF_POS_PARAMS      0
+
 // ----------------------------------------------------------------------------
 // non GUI features selection
 // ----------------------------------------------------------------------------
@@ -287,6 +307,14 @@
 // Recommended setting: 1 (but may be safely disabled if you don't use it)
 #define wxUSE_FSVOLUME 1
 
+// Use wxStandardPaths class which allows to retrieve some standard locations
+// in the file system
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be disabled to save space, but not much)
+#define wxUSE_STDPATHS      1
+
 // use wxTextBuffer class: required by wxTextFile
 #define wxUSE_TEXTBUFFER 1
 
@@ -407,19 +435,28 @@
 // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
 #define wxUSE_FS_ZIP 1
 
+// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_ARCHIVE    1
+
+// wxArchive classes for accessing archives such as zip and tar
+#define wxUSE_ARCHIVE_STREAMS 1
+
 // Set to 1 to compile wxZipInput/OutputStream classes.
 #define wxUSE_ZIPSTREAM 1
 
+// Set to 1 to compile wxTarInput/OutputStream classes.
+#define wxUSE_TARSTREAM     1
+
 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
-// wxUSE_LIBPNG.
-#define wxUSE_ZLIB 1
+// wxUSE_LIBPNG
+#define wxUSE_ZLIB          1
 
 // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
 #define wxUSE_FS_INET 1
 
 // If enabled, the code written by Apple will be used to write, in a portable
 // way, float on the disk. See extended.c for the license which is different
-// from wxWindows one.
+// from wxWidgets one.
 //
 // Default is 1.
 //
@@ -455,6 +492,15 @@
 // Define this to use wxURL class.
 #define wxUSE_URL 1
 
+// Support for wxVariant class used in several places throughout the library,
+// notably in wxDataViewCtrl API.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you want to reduce the library size as much as
+// possible in which case setting this to 0 can gain up to 100KB.
+#define wxUSE_VARIANT 1
+
 // Support for regular expression matching via wxRegEx class: enable this to
 // use POSIX regular expressions in your code. You need to compile regex
 // library from src/regex to use it under Windows.
@@ -468,16 +514,70 @@
 // wxSystemOptions class
 #define wxUSE_SYSTEM_OPTIONS 1
 
-// wxWave class
-#define wxUSE_WAVE 1
+// wxSound class
+#define wxUSE_SOUND 1
+
+// Use wxMediaCtrl
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_MEDIACTRL     1
+
+// Use QuickTime
+//
+// Default is 0
+//
+// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
+#define wxUSE_QUICKTIME     0
+
+// Use DirectShow
+//
+// Default is 0
+//
+// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
+#define wxUSE_DIRECTSHOW    0
+
+// Use wxWidget's XRC XML-based resource system.  Recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC       1
 
 // XML parsing classes. Note that their API will change in the future, so
 // using wxXmlDocument and wxXmlNode in your app is not recommended.
 //
 // Default is 1
 //
-// Recommended setting: 1 (needed by XRC)
-#define wxUSE_XML       1
+// Recommended setting: 1 (required by XRC)
+#if wxUSE_XRC
+#  define wxUSE_XML       1
+#else
+#  define wxUSE_XML       0
+#endif
+
+// Use wxWidget's AUI docking system
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_AUI       1
+
+
+// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
+// 2D drawing API.  (Still somewhat experimental)
+//
+// Please note that on Windows you will need to link with gdiplus.lib (use
+// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
+// application if you want it to be runnable on pre-XP systems.
+//
+// Default is 0
+//
+// Recommended setting: 1
+#ifndef wxUSE_GRAPHICS_CONTEXT
+#define wxUSE_GRAPHICS_CONTEXT 0
+#endif
 
 // Set to 1 to compile MS Windows XP theme engine support
 #define wxUSE_UXTHEME           0
@@ -514,7 +614,7 @@
 // Recommended setting: 1 (may be set to 0)
 #define wxUSE_TIPWINDOW    1
 
-// Each of the settings below corresponds to one wxWindows control. They are
+// Each of the settings below corresponds to one wxWidgets control. They are
 // all switched on by default but may be disabled if you are sure that your
 // program (including any standard dialogs it can show!) doesn't need them and
 // if you desperately want to save some space. If you use any of these you must
@@ -523,29 +623,38 @@
 // Default is 1
 //
 // Recommended setting: 1
-#define wxUSE_BUTTON       1    // wxButton
-#define wxUSE_BMPBUTTON    1    // wxBitmapButton
-#define wxUSE_CALENDARCTRL 1    // wxCalendarCtrl
-#define wxUSE_CHECKBOX     1    // wxCheckBox
-#define wxUSE_CHECKLISTBOX 1    // wxCheckListBox
-#define wxUSE_CHOICE       1    // wxChoice
-#define wxUSE_COMBOBOX     1    // wxComboBox
-#define wxUSE_GAUGE        1    // wxGauge
-#define wxUSE_LISTBOX      1    // wxListBox
-#define wxUSE_LISTCTRL     1    // wxListCtrl
-#define wxUSE_RADIOBOX     1    // wxRadioBox
-#define wxUSE_RADIOBTN     1    // wxRadioButton
-#define wxUSE_SCROLLBAR    1    // wxScrollBar
-#define wxUSE_SLIDER       1    // wxSlider
-#define wxUSE_SPINBTN      1    // wxSpinButton
-#define wxUSE_SPINCTRL     1    // wxSpinCtrl
-#define wxUSE_STATBOX      1    // wxStaticBox
-#define wxUSE_STATLINE     1    // wxStaticLine
-#define wxUSE_STATTEXT     1    // wxStaticText
-#define wxUSE_STATBMP      1    // wxStaticBitmap
-#define wxUSE_TEXTCTRL     1    // wxTextCtrl
-#define wxUSE_TOGGLEBTN    0    // requires wxButton // currently not supported
-#define wxUSE_TREECTRL     1    // wxTreeCtrl
+#define wxUSE_ANIMATIONCTRL    1    // wxAnimationCtrl
+#define wxUSE_BUTTON           1    // wxButton
+#define wxUSE_BMPBUTTON        1    // wxBitmapButton
+#define wxUSE_CALENDARCTRL     1    // wxCalendarCtrl
+#define wxUSE_CHECKBOX         1    // wxCheckBox
+#define wxUSE_CHECKLISTBOX     1    // wxCheckListBox
+#define wxUSE_CHOICE           1    // wxChoice
+#define wxUSE_COLLPANE         1    // wxCollapsiblePane
+#define wxUSE_COLOURPICKERCTRL 1    // wxColourPickerCtrl
+#define wxUSE_COMBOBOX         1    // wxComboBox
+#define wxUSE_DATAVIEWCTRL     1    // wxDataViewCtrl
+#define wxUSE_DATEPICKCTRL     1    // wxDatePickerCtrl
+#define wxUSE_DIRPICKERCTRL    1    // wxDirPickerCtrl
+#define wxUSE_FILEPICKERCTRL   1    // wxFilePickerCtrl
+#define wxUSE_FONTPICKERCTRL   1    // wxFontPickerCtrl
+#define wxUSE_GAUGE            1    // wxGauge
+#define wxUSE_HYPERLINKCTRL    1    // wxHyperlinkCtrl
+#define wxUSE_LISTBOX          1    // wxListBox
+#define wxUSE_LISTCTRL         1    // wxListCtrl
+#define wxUSE_RADIOBOX         1    // wxRadioBox
+#define wxUSE_RADIOBTN         1    // wxRadioButton
+#define wxUSE_SCROLLBAR        1    // wxScrollBar
+#define wxUSE_SLIDER           1    // wxSlider
+#define wxUSE_SPINBTN          1    // wxSpinButton
+#define wxUSE_SPINCTRL         1    // wxSpinCtrl
+#define wxUSE_STATBOX          1    // wxStaticBox
+#define wxUSE_STATLINE         1    // wxStaticLine
+#define wxUSE_STATTEXT         1    // wxStaticText
+#define wxUSE_STATBMP          1    // wxStaticBitmap
+#define wxUSE_TEXTCTRL         1    // wxTextCtrl
+#define wxUSE_TOGGLEBTN        1    // wxToggleButton
+#define wxUSE_TREECTRL         1    // wxTreeCtrl
 
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
@@ -574,9 +683,6 @@
 #define wxUSE_TOOLBAR 1
 #define wxUSE_TOOLBAR_NATIVE 0
 
-// this setting is obsolete, value is ignored
-#define wxUSE_BUTTONBAR 0
-
 // wxNotebook is a control with several "tabs" located on one of its sides. It
 // may be used ot logically organise the data presented to the user instead of
 // putting everything in one huge dialog. It replaces wxTabControl and related
@@ -587,6 +693,38 @@
 // Recommended setting: 1
 #define wxUSE_NOTEBOOK 1
 
+// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_LISTBOOK 1
+
+// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_CHOICEBOOK 1
+
+// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TREEBOOK 1
+
+// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
+// tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLBOOK 1
+
 // wxTabDialog is a generic version of wxNotebook but it is incompatible with
 // the new class. It shouldn't be used in new code.
 //
@@ -595,14 +733,43 @@
 // Recommended setting: 0 (use wxNotebook)
 #define wxUSE_TAB_DIALOG 0
 
-// wxGrid class.
+// wxGrid class
+//
+// Default is 1, set to 0 to cut down compilation time and binaries size if you
+// don't use it.
+//
+// Recommended setting: 1
 //
-// Default is 1.
 #define wxUSE_GRID 1
 
 // wxProperty[Value/Form/List] classes, used by Dialog Editor
 #define wxUSE_PROPSHEET 1
 
+// wxComboCtrl and related classes: combobox with custom popup window and
+// not necessarily a listbox.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
+//                      it used by wxComboBox
+#define wxUSE_COMBOCTRL 1
+
+// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
+// items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0, except where it is
+//                      needed as a base class for generic wxBitmapComboBox.
+#define wxUSE_ODCOMBOBOX 1
+
+// wxBitmapComboBox a combobox that can have images in front of text items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0
+#define wxUSE_BITMAPCOMBOBOX 1
+
 // ----------------------------------------------------------------------------
 // Miscellaneous GUI stuff
 // ----------------------------------------------------------------------------
@@ -684,15 +851,6 @@
 // common dialogs
 // ----------------------------------------------------------------------------
 
-// Define 1 to use generic dialogs in Windows, even though they duplicate
-// native common dialog (e.g. wxColourDialog). This is mainly useful for
-// testing.
-//
-// Default is 0
-//
-// Recommended setting: 0
-#define wxUSE_GENERIC_DIALOGS_IN_MSW 0
-
 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
 // file selector, printer dialog). Switching this off also switches off the
 // printing architecture and interactive wxPrinterDC.
@@ -775,6 +933,14 @@
 // wizards
 #define wxUSE_WIZARDDLG 1
 
+// Compile in wxAboutBox() function showing the standard "About" dialog.
+//
+// Default is 1
+//
+// Recommended setting: 1 but can be set to 0 to save some space if you don't
+//                      use this function
+#define wxUSE_ABOUTDLG 1
+
 // ----------------------------------------------------------------------------
 // Metafiles support
 // ----------------------------------------------------------------------------
@@ -806,14 +972,24 @@
 // Big GUI components
 // ----------------------------------------------------------------------------
 
+// Set to 0 to disable MDI support.
+//
+// Requires wxUSE_NOTEBOOK under platforms other than MSW.
+//
+// Default is 1.
+//
+// Recommended setting: 1, can be safely set to 0.
+#define wxUSE_MDI 1
+
 // Set to 0 to disable document/view architecture
 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
 
 // Set to 0 to disable MDI document/view architecture
+//
+// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
 #define wxUSE_MDI_ARCHITECTURE 1
 
 // Set to 0 to disable print/preview architecture code
-//
 #define wxUSE_PRINTING_ARCHITECTURE 1
 
 // wxHTML sublibrary allows to display HTML in wxWindow programs and much,
@@ -840,6 +1016,14 @@
     #define wxUSE_GLCANVAS 0
 #endif
 
+// wxRichTextCtrl allows editing of styled text.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 if you want compile a
+// smaller library.
+#define wxUSE_RICHTEXT       1
+
 // wxTreeLayout class
 #define wxUSE_TREELAYOUT 1
 
@@ -920,7 +1104,7 @@
 #define wxUSE_WXHTML_HELP 1
 
 // Use resources
-#define wxUSE_RESOURCES 1
+#define wxUSE_RESOURCES 0
 
 // Window layout constraint system
 #define wxUSE_CONSTRAINTS 1
@@ -941,14 +1125,6 @@
 // Set to 1 to use font metric files in GetTextExtent
 #define wxUSE_AFM_FOR_POSTSCRIPT 1
 
-// Set to 0 to disable PostScript print/preview architecture code under Windows
-// (just use Windows printing).
-#if defined(__WIN32__)
-    #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
-#else
-    #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
-#endif
-
 // ----------------------------------------------------------------------------
 // database classes
 // ----------------------------------------------------------------------------
@@ -966,7 +1142,7 @@
 #define wxODBC_FWD_ONLY_CURSORS 0
 
 // Default is 0.  Set to 1 to use the deprecated classes, enum types, function,
-// member variables.  With a setting of 1, full backward compatability with the
+// member variables.  With a setting of 1, full backward compatibility with the
 // 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
 // as future development will be done only on the non-deprecated
 // functions/classes/member variables/etc.
@@ -1046,7 +1222,7 @@
 // ----------------------------------------------------------------------------
 #if defined(__WINDOWS__)
 
-// Set this to 1 if you want to use wxWindows and MFC in the same program. This
+// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
 // will override some other settings (see below)
 //
 // Default is 0.
@@ -1063,22 +1239,13 @@
 // Recommended setting: 1 for WIN32
     #define wxUSE_OLE 1
 
-// Set this to 1 to use Microsoft CTL3D library for "3D-look" under Win16 or NT
-// 3.x. This setting is ignored under Win9x and NT 4.0+.
-//
-// Default is 0 for (most) Win32 (systems), 1 for Win16
-//
-// Recommended setting: 0
-#define wxUSE_CTL3D 0
-
-// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for
-// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native
-// miniframes support instead.
-//
-// Default is 0 for (most) Win32 (systems), 1 for Win16
-//
-// Recommended setting: 0
-#define wxUSE_ITSY_BITSY 0
+// Set to 0 to disable PostScript print/preview architecture code under Windows
+// (just use Windows printing).
+#if defined(__WIN32__)
+    #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
+#else
+    #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
+#endif
 
 // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
 // which allows to put more than ~32Kb of text in it even under Win9x (NT
@@ -1106,6 +1273,14 @@
 // Recommended setting: 1, set to 0 for a small library size reduction
 #define wxUSE_OWNER_DRAWN 0
 
+// Set this to 1 to be able to use wxCrashReport::Generate() to create mini
+// dumps of your program when it crashes (or at any other moment)
+//
+// Default is 1 if supported by the compiler (VC++ and recent BC++ only).
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_CRASHREPORT 1
+
 #endif
 
 // ----------------------------------------------------------------------------