X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/81152407d0a131519e61fdedf2634b9bc49e0ce8..86ac84b8ce086e6bbda58f422d41f84268606e35:/include/wx/palmos/setup0.h?ds=sidebyside diff --git a/include/wx/palmos/setup0.h b/include/wx/palmos/setup0.h index a5b7d68066..bf8612e24b 100644 --- a/include/wx/palmos/setup0.h +++ b/include/wx/palmos/setup0.h @@ -1,5 +1,5 @@ ///////////////////////////////////////////////////////////////////////////// -// Name: wx/msw/setup.h +// Name: wx/palmos/setup.h // Purpose: Configuration for the library // Author: Julian Smart // Modified by: @@ -12,6 +12,7 @@ #ifndef _WX_SETUP_H_ #define _WX_SETUP_H_ +/* --- start common options --- */ // ---------------------------------------------------------------------------- // global settings // ---------------------------------------------------------------------------- @@ -26,15 +27,17 @@ // compatibility settings // ---------------------------------------------------------------------------- -// This setting determines the compatibility with 2.2 API: set it to 1 to -// enable it but please consider updating your code instead. +// This setting determines the compatibility with 2.6 API: set it to 0 to +// flag all cases of using deprecated functions. // -// Default is 0 +// Default is 1 but please try building your code with 0 as the default will +// change to 0 in the next version and the deprecated functions will disappear +// in the version after it completely. // // Recommended setting: 0 (please update your code) -#define WXWIN_COMPATIBILITY_2_2 0 +#define WXWIN_COMPATIBILITY_2_6 0 -// This setting determines the compatibility with 2.4 API: set it to 0 to +// This setting determines the compatibility with 2.8 API: set it to 0 to // flag all cases of using deprecated functions. // // Default is 1 but please try building your code with 0 as the default will @@ -42,15 +45,16 @@ // in the version after it completely. // // Recommended setting: 0 (please update your code) -#define WXWIN_COMPATIBILITY_2_4 1 +#define WXWIN_COMPATIBILITY_2_8 1 -// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before. -// If migrating between versions, your dialogs may seem to shrink. +// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when +// default system font is used for wxWindow::GetCharWidth/Height() instead of +// the current font. // -// Default is 1 +// Default is 0 // -// Recommended setting: 0 (the new calculations are more correct!) -#define wxDIALOG_UNIT_COMPATIBILITY 1 +// Recommended setting: 0 +#define wxDIALOG_UNIT_COMPATIBILITY 0 // ---------------------------------------------------------------------------- // debugging settings @@ -118,57 +122,41 @@ // Default is 1 // // Recommended setting: 1 if your compiler supports it. -#if defined(_MSC_VER) || \ - (defined(__BORLANDC__) && __BORLANDC__ >= 0x0550) - #define wxUSE_ON_FATAL_EXCEPTION 0 -#else -#define wxUSE_ON_FATAL_EXCEPTION 0 -#endif +#define wxUSE_ON_FATAL_EXCEPTION 1 + +// Set this to 1 to be able to generate a human-readable (unlike +// machine-readable minidump created by wxCrashReport::Generate()) stack back +// trace when your program crashes using wxStackWalker +// +// Default is 1 if supported by the compiler. +// +// Recommended setting: 1, set to 0 if your programs never crash +#define wxUSE_STACKWALKER 1 + +// Set this to 1 to compile in wxDebugReport class which allows you to create +// and optionally upload to your web site a debug report consisting of back +// trace of the crash (if wxUSE_STACKWALKER == 1) and other information. +// +// Default is 1 if supported by the compiler. +// +// Recommended setting: 1, it is compiled into a separate library so there +// is no overhead if you don't use it +#define wxUSE_DEBUGREPORT 1 // ---------------------------------------------------------------------------- // Unicode support // ---------------------------------------------------------------------------- -// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be -// defined as wchar_t, wxString will use Unicode internally. If you set this -// to 1, you must use wxT() macro for all literal strings in the program. -// -// Unicode is currently only fully supported under Windows NT/2000/XP -// (Windows 9x doesn't support it and the programs compiled in Unicode mode -// will not run under 9x -- but see wxUSE_UNICODE_MSLU below). -// -// Default is 0 -// -// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP) +// These settings are obsolete: the library is always built in Unicode mode +// now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if +// absolutely necessary -- updating it is strongly recommended as the ANSI mode +// will disappear completely in future wxWidgets releases. #ifndef wxUSE_UNICODE - #define wxUSE_UNICODE 0 + #define wxUSE_UNICODE 1 #endif -// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode -// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. -// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see -// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note -// that you will have to modify the makefiles to include unicows.lib import -// library as the first library (see installation instructions in install.txt -// to learn how to do it when building the library or samples). -// -// If your compiler doesn't have unicows.lib, you can get a version of it at -// http://libunicows.sourceforge.net -// -// Default is 0 -// -// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems) -#define wxUSE_UNICODE_MSLU 0 - -// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without -// compiling the program in Unicode mode. More precisely, it will be possible -// to construct wxString from a wide (Unicode) string and convert any wxString -// to Unicode. -// -// Default is 1 -// -// Recommended setting: 1 -#define wxUSE_WCHAR_T 0 +// wxUSE_WCHAR_T is required by wxWidgets now, don't change. +#define wxUSE_WCHAR_T 1 // ---------------------------------------------------------------------------- // global features @@ -181,6 +169,9 @@ // code will lead to undefined behaviour -- but the code itself will be // slightly smaller and faster. // +// Note that like wxUSE_THREADS this option is automatically set to 0 if +// wxNO_EXCEPTIONS is defined. +// // Default is 1 // // Recommended setting: depends on whether you intend to use C++ exceptions @@ -191,14 +182,9 @@ // // Default is 0 // -// Recommended setting: 0 +// Recommended setting: 0 (this is still work in progress...) #define wxUSE_EXTENDED_RTTI 0 -#if defined(__BORLANDC__) -#undef wxUSE_EXTENDED_RTTI -#define wxUSE_EXTENDED_RTTI 1 -#endif - // Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from // std::list and std::vector, with a compatibility interface, // and for wxHashMap to be implemented with templates. @@ -215,23 +201,23 @@ // Default is 1 // // Recommended setting: 1 (always) -#define wxUSE_LOG 0 +#define wxUSE_LOG 1 // Recommended setting: 1 -#define wxUSE_LOGWINDOW 0 +#define wxUSE_LOGWINDOW 1 // Recommended setting: 1 -#define wxUSE_LOGGUI 0 +#define wxUSE_LOGGUI 1 // Recommended setting: 1 -#define wxUSE_LOG_DIALOG 0 +#define wxUSE_LOG_DIALOG 1 // Support for command line parsing using wxCmdLineParser class. // // Default is 1 // // Recommended setting: 1 (can be set to 0 if you don't use the cmd line) -#define wxUSE_CMDLINE_PARSER 0 +#define wxUSE_CMDLINE_PARSER 1 // Support for multithreaded applications: if 1, compile in thread classes // (thread.h) and make the library a bit more thread safe. Although thread @@ -239,18 +225,78 @@ // library without it if you have no use for it - this will result in a // somewhat smaller and faster operation. // -// This is ignored under Win16, threads are only supported under Win32. +// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset +// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in +// build/msw/config.* file this value will have no effect. // // Default is 1 // // Recommended setting: 0 unless you do plan to develop MT applications -#define wxUSE_THREADS 0 +#define wxUSE_THREADS 1 + +// If enabled, compiles wxWidgets streams classes +// +// wx stream classes are used for image IO, process IO redirection, network +// protocols implementation and much more and so disabling this results in a +// lot of other functionality being lost. +// +// Default is 1 +// +// Recommended setting: 1 as setting it to 0 disables many other things +#define wxUSE_STREAMS 1 + +// This is not a real option but is used as the default value for +// wxUSE_STD_IOSTREAM and wxUSE_STD_STRING. +// +// Currently the Digital Mars and Watcom compilers come without standard C++ +// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have +// them (e.g. from STLPort). +// +// VC++ 5.0 does include standard C++ library headers, however they produce +// many warnings that can't be turned off when compiled at warning level 4. +#if defined(__DMC__) || defined(__WATCOMC__) \ + || (defined(_MSC_VER) && _MSC_VER < 1200) + #define wxUSE_STD_DEFAULT 0 +#else + #define wxUSE_STD_DEFAULT 1 +#endif -// If enabled (1), compiles wxWidgets streams classes -#define wxUSE_STREAMS 0 +// Use standard C++ streams if 1 instead of wx streams in some places. If +// disabled (default), wx streams are used everywhere and wxWidgets doesn't +// depend on the standard streams library. +// +// Notice that enabling this does not replace wx streams with std streams +// everywhere, in a lot of places wx streams are used no matter what. +// +// Default is 0 +// +// Recommended setting: 1 if you use the standard streams anyhow and so +// dependency on the standard streams library is not a +// problem +#define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT -// Use standard C++ streams if 1. If 0, use wxWin streams implementation. -#define wxUSE_STD_IOSTREAM 0 +// Enable conversion to standard C++ string if 1. +// +// Default is 1 for most compilers. +// +// Recommended setting: 1 unless you want to ensure your program doesn't use +// the standard C++ library at all. +#define wxUSE_STD_STRING wxUSE_STD_DEFAULT + +// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf. +// Note that if the system's implementation does not support positional +// parameters, setting this to 1 forces the use of the wxWidgets implementation +// of wxVsnprintf. The standard vsnprintf() supports positional parameters on +// many Unix systems but usually doesn't under Windows. +// +// Positional parameters are very useful when translating a program since using +// them in formatting strings allow translators to correctly reorder the +// translated sentences. +// +// Default is 1 +// +// Recommended setting: 1 if you want to support multiple languages +#define wxUSE_PRINTF_POS_PARAMS 1 // ---------------------------------------------------------------------------- // non GUI features selection @@ -269,6 +315,24 @@ // Recommended setting: 1 #define wxUSE_LONGLONG 1 +// Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for +// storing binary data in wxConfig on most platforms. +// +// Default is 1. +// +// Recommended setting: 1 (but can be safely disabled if you don't use it) +#define wxUSE_BASE64 1 + +// Set this to 1 to be able to use wxEventLoop even in console applications +// (i.e. using base library only, without GUI). This is mostly useful for +// processing socket events but is also necessary to use timers in console +// applications +// +// Default is 1. +// +// Recommended setting: 1 (but can be safely disabled if you don't use it) +#define wxUSE_CONSOLE_EVENTLOOP 1 + // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. // @@ -276,25 +340,48 @@ // // Recommended setting: 1 (wxFile is highly recommended as it is required by // i18n code, wxFileConfig and others) -#define wxUSE_FILE 0 -#define wxUSE_FFILE 0 +#define wxUSE_FILE 1 +#define wxUSE_FFILE 1 // Use wxFSVolume class providing access to the configured/active mount points // // Default is 1 // // Recommended setting: 1 (but may be safely disabled if you don't use it) -#define wxUSE_FSVOLUME 0 +#define wxUSE_FSVOLUME 1 + +// Use wxStandardPaths class which allows to retrieve some standard locations +// in the file system +// +// Default is 1 +// +// Recommended setting: 1 (may be disabled to save space, but not much) +#define wxUSE_STDPATHS 1 // use wxTextBuffer class: required by wxTextFile -#define wxUSE_TEXTBUFFER 0 +#define wxUSE_TEXTBUFFER 1 // use wxTextFile class: requires wxFile and wxTextBuffer, required by // wxFileConfig -#define wxUSE_TEXTFILE 0 +#define wxUSE_TEXTFILE 1 // i18n support: _() macro, wxLocale class. Requires wxTextFile. -#define wxUSE_INTL 0 +#define wxUSE_INTL 1 + +// Provide wxFoo_l() functions similar to standard foo() functions but taking +// an extra locale parameter. +// +// Notice that this is fully implemented only for the systems providing POSIX +// xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary +// almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will +// only work for the current user locale and "C" locale. You can use +// wxHAS_XLOCALE_SUPPORT to test whether the full support is available. +// +// Default is 1 +// +// Recommended setting: 1 but may be disabled if you are writing programs +// running only in C locale anyhow +#define wxUSE_XLOCALE 1 // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which // allow to manipulate dates, times and time intervals. wxDateTime replaces the @@ -311,21 +398,21 @@ // Default is 1 // // Recommended setting: 1 -#define wxUSE_DATETIME 0 +#define wxUSE_DATETIME 1 // Set wxUSE_TIMER to 1 to compile wxTimer class // // Default is 1 // // Recommended setting: 1 -#define wxUSE_TIMER 0 +#define wxUSE_TIMER 1 // Use wxStopWatch clas. // // Default is 1 // // Recommended setting: 1 (needed by wxSocket) -#define wxUSE_STOPWATCH 0 +#define wxUSE_STOPWATCH 1 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes // which allow the application to store its settings in the persistent @@ -335,7 +422,7 @@ // See also wxUSE_CONFIG_NATIVE below. // // Recommended setting: 1 -#define wxUSE_CONFIG 0 +#define wxUSE_CONFIG 1 // If wxUSE_CONFIG is 1, you may choose to use either the native config // classes under Windows (using .INI files under Win16 and the registry under @@ -348,7 +435,7 @@ // not wxFileConfig. // // Recommended setting: 1 -#define wxUSE_CONFIG_NATIVE 0 +#define wxUSE_CONFIG_NATIVE 1 // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows // to connect/disconnect from the network and be notified whenever the dial-up @@ -357,7 +444,7 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_DIALUP_MANAGER 0 +#define wxUSE_DIALUP_MANAGER 1 // Compile in classes for run-time DLL loading and function calling. // Required by wxUSE_DIALUP_MANAGER. @@ -367,29 +454,49 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_DYNLIB_CLASS 0 +#define wxUSE_DYNLIB_CLASS 1 // experimental, don't use for now -#define wxUSE_DYNAMIC_LOADER 0 +#define wxUSE_DYNAMIC_LOADER 1 // Set to 1 to use socket classes -#define wxUSE_SOCKETS 0 +#define wxUSE_SOCKETS 1 + +// Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS) +// +// Notice that currently setting this option under Windows will result in +// programs which can only run on recent OS versions (with ws2_32.dll +// installed) which is why it is disabled by default. +// +// Default is 1. +// +// Recommended setting: 1 if you need IPv6 support +#define wxUSE_IPV6 0 // Set to 1 to enable virtual file systems (required by wxHTML) -#define wxUSE_FILESYSTEM 0 +#define wxUSE_FILESYSTEM 1 // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM) -#define wxUSE_FS_ZIP 0 +#define wxUSE_FS_ZIP 1 + +// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM) +#define wxUSE_FS_ARCHIVE 1 // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM) -#define wxUSE_FS_INET 0 +#define wxUSE_FS_INET 1 + +// wxArchive classes for accessing archives such as zip and tar +#define wxUSE_ARCHIVE_STREAMS 1 // Set to 1 to compile wxZipInput/OutputStream classes. -#define wxUSE_ZIPSTREAM 0 +#define wxUSE_ZIPSTREAM 1 + +// Set to 1 to compile wxTarInput/OutputStream classes. +#define wxUSE_TARSTREAM 1 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by // wxUSE_LIBPNG -#define wxUSE_ZLIB 0 +#define wxUSE_ZLIB 1 // If enabled, the code written by Apple will be used to write, in a portable // way, float on the disk. See extended.c for the license which is different @@ -398,16 +505,19 @@ // Default is 1. // // Recommended setting: 1 unless you don't like the license terms (unlikely) -#define wxUSE_APPLE_IEEE 0 +#define wxUSE_APPLE_IEEE 1 // Joystick support class -#define wxUSE_JOYSTICK 0 +#define wxUSE_JOYSTICK 1 + +// wxFontEnumerator class +#define wxUSE_FONTENUM 1 // wxFontMapper class -#define wxUSE_FONTMAP 0 +#define wxUSE_FONTMAP 1 // wxMimeTypesManager class -#define wxUSE_MIMETYPE 0 +#define wxUSE_MIMETYPE 1 // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP // or wxURL you need to set this to 1. @@ -415,15 +525,15 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_PROTOCOL 0 +#define wxUSE_PROTOCOL 1 // The settings for the individual URL schemes -#define wxUSE_PROTOCOL_FILE 0 -#define wxUSE_PROTOCOL_FTP 0 -#define wxUSE_PROTOCOL_HTTP 0 +#define wxUSE_PROTOCOL_FILE 1 +#define wxUSE_PROTOCOL_FTP 1 +#define wxUSE_PROTOCOL_HTTP 1 // Define this to use wxURL class. -#define wxUSE_URL 0 +#define wxUSE_URL 1 // Define this to use native platform url and protocol support. // Currently valid only for MS-Windows. @@ -435,6 +545,15 @@ // This code is experimental and subject to change. #define wxUSE_URL_NATIVE 0 +// Support for wxVariant class used in several places throughout the library, +// notably in wxDataViewCtrl API. +// +// Default is 1. +// +// Recommended setting: 1 unless you want to reduce the library size as much as +// possible in which case setting this to 0 can gain up to 100KB. +#define wxUSE_VARIANT 1 + // Support for regular expression matching via wxRegEx class: enable this to // use POSIX regular expressions in your code. You need to compile regex // library from src/regex to use it under Windows. @@ -443,33 +562,70 @@ // // Recommended setting: 1 if your compiler supports it, if it doesn't please // contribute us a makefile for src/regex for it -#define wxUSE_REGEX 0 +#define wxUSE_REGEX 1 // wxSystemOptions class -#define wxUSE_SYSTEM_OPTIONS 0 +#define wxUSE_SYSTEM_OPTIONS 1 // wxSound class -#define wxUSE_SOUND 0 +#define wxUSE_SOUND 1 -#define wxUSE_MEDIACTRL 0 +// Use wxMediaCtrl +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_MEDIACTRL 1 // Use wxWidget's XRC XML-based resource system. Recommended. // // Default is 1 // // Recommended setting: 1 (requires wxUSE_XML) -#define wxUSE_XRC 0 +#define wxUSE_XRC 1 // XML parsing classes. Note that their API will change in the future, so // using wxXmlDocument and wxXmlNode in your app is not recommended. // -// Default is 1 +// Default is the same as wxUSE_XRC, i.e. 1 by default. // // Recommended setting: 1 (required by XRC) -#if wxUSE_XRC -# define wxUSE_XML 1 -#else -# define wxUSE_XML 0 +#define wxUSE_XML wxUSE_XRC + +// Use wxWidget's AUI docking system +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_AUI 1 + +// Use wxPropertyGrid. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_PROPGRID 1 + +// Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_STC 1 + + +// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced +// 2D drawing API. (Still somewhat experimental) +// +// Please note that on Windows you will need to link with gdiplus.lib (use +// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your +// application if you want it to be runnable on pre-XP systems. +// +// Default is 0 +// +// Recommended setting: 1 +#ifndef wxUSE_GRAPHICS_CONTEXT +#define wxUSE_GRAPHICS_CONTEXT 0 #endif // ---------------------------------------------------------------------------- @@ -490,7 +646,7 @@ // Default is 1 // // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW) -#define wxUSE_POPUPWIN 0 +#define wxUSE_POPUPWIN 1 // wxTipWindow allows to implement the custom tooltips, it is used by the // context help classes. Requires wxUSE_POPUPWIN. @@ -498,7 +654,7 @@ // Default is 1 // // Recommended setting: 1 (may be set to 0) -#define wxUSE_TIPWINDOW 0 +#define wxUSE_TIPWINDOW 1 // Each of the settings below corresponds to one wxWidgets control. They are // all switched on by default but may be disabled if you are sure that your @@ -509,29 +665,42 @@ // Default is 1 // // Recommended setting: 1 -#define wxUSE_BUTTON 0 // wxButton -#define wxUSE_BMPBUTTON 0 // wxBitmapButton -#define wxUSE_CALENDARCTRL 0 // wxCalendarCtrl -#define wxUSE_CHECKBOX 0 // wxCheckBox -#define wxUSE_CHECKLISTBOX 0 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) -#define wxUSE_CHOICE 0 // wxChoice -#define wxUSE_COMBOBOX 0 // wxComboBox -#define wxUSE_GAUGE 0 // wxGauge -#define wxUSE_LISTBOX 0 // wxListBox -#define wxUSE_LISTCTRL 0 // wxListCtrl -#define wxUSE_RADIOBOX 0 // wxRadioBox -#define wxUSE_RADIOBTN 0 // wxRadioButton -#define wxUSE_SCROLLBAR 0 // wxScrollBar -#define wxUSE_SLIDER 0 // wxSlider -#define wxUSE_SPINBTN 0 // wxSpinButton -#define wxUSE_SPINCTRL 0 // wxSpinCtrl -#define wxUSE_STATBOX 0 // wxStaticBox -#define wxUSE_STATLINE 0 // wxStaticLine -#define wxUSE_STATTEXT 0 // wxStaticText -#define wxUSE_STATBMP 0 // wxStaticBitmap -#define wxUSE_TEXTCTRL 0 // wxTextCtrl -#define wxUSE_TOGGLEBTN 0 // requires wxButton -#define wxUSE_TREECTRL 0 // wxTreeCtrl +#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl +#define wxUSE_BUTTON 1 // wxButton +#define wxUSE_BMPBUTTON 1 // wxBitmapButton +#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl +#define wxUSE_CHECKBOX 1 // wxCheckBox +#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) +#define wxUSE_CHOICE 1 // wxChoice +#define wxUSE_COLLPANE 1 // wxCollapsiblePane +#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl +#define wxUSE_COMBOBOX 1 // wxComboBox +#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl +#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl +#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl +#define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox +#define wxUSE_FILECTRL 1 // wxFileCtrl +#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl +#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl +#define wxUSE_GAUGE 1 // wxGauge +#define wxUSE_HEADERCTRL 1 // wxHeaderCtrl +#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl +#define wxUSE_LISTBOX 1 // wxListBox +#define wxUSE_LISTCTRL 1 // wxListCtrl +#define wxUSE_RADIOBOX 1 // wxRadioBox +#define wxUSE_RADIOBTN 1 // wxRadioButton +#define wxUSE_SCROLLBAR 1 // wxScrollBar +#define wxUSE_SEARCHCTRL 1 // wxSearchCtrl +#define wxUSE_SLIDER 1 // wxSlider +#define wxUSE_SPINBTN 1 // wxSpinButton +#define wxUSE_SPINCTRL 1 // wxSpinCtrl +#define wxUSE_STATBOX 1 // wxStaticBox +#define wxUSE_STATLINE 1 // wxStaticLine +#define wxUSE_STATTEXT 1 // wxStaticText +#define wxUSE_STATBMP 1 // wxStaticBitmap +#define wxUSE_TEXTCTRL 1 // wxTextCtrl +#define wxUSE_TOGGLEBTN 1 // requires wxButton +#define wxUSE_TREECTRL 1 // wxTreeCtrl // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR // below either wxStatusBar95 or a generic wxStatusBar will be used. @@ -545,7 +714,7 @@ // or the wrapper around native control. For native look and feel the native // version should be used. // -// Default is 1. +// Default is 1 for the platforms where native status bar is supported. // // Recommended setting: 1 (there is no advantage in using the generic one) #define wxUSE_NATIVE_STATUSBAR 1 @@ -557,18 +726,18 @@ // Default is 1 for all settings. // // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE. -#define wxUSE_TOOLBAR 0 -#define wxUSE_TOOLBAR_NATIVE 0 +#define wxUSE_TOOLBAR 1 +#define wxUSE_TOOLBAR_NATIVE 1 // wxNotebook is a control with several "tabs" located on one of its sides. It -// may be used ot logically organise the data presented to the user instead of +// may be used to logically organise the data presented to the user instead of // putting everything in one huge dialog. It replaces wxTabControl and related // classes of wxWin 1.6x. // // Default is 1. // // Recommended setting: 1 -#define wxUSE_NOTEBOOK 0 +#define wxUSE_NOTEBOOK 1 // wxListbook control is similar to wxNotebook but uses wxListCtrl instead of // the tabs @@ -576,7 +745,7 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_LISTBOOK 0 +#define wxUSE_LISTBOOK 1 // wxChoicebook control is similar to wxNotebook but uses wxChoice instead of // the tabs @@ -584,33 +753,91 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_CHOICEBOOK 0 +#define wxUSE_CHOICEBOOK 1 -// wxTabDialog is a generic version of wxNotebook but it is incompatible with -// the new class. It shouldn't be used in new code. +// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of +// the tabs // -// Default is 0. +// Default is 1. // -// Recommended setting: 0 (use wxNotebook) -#define wxUSE_TAB_DIALOG 0 +// Recommended setting: 1 +#define wxUSE_TREEBOOK 1 + +// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of +// tabs +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_TOOLBOOK 1 + +// wxTaskBarIcon is a small notification icon shown in the system toolbar or +// dock. +// +// Default is 1. +// +// Recommended setting: 1 (but can be set to 0 if you don't need it) +#define wxUSE_TASKBARICON 1 // wxGrid class // -// Default is 1 for both options. +// Default is 1, set to 0 to cut down compilation time and binaries size if you +// don't use it. // // Recommended setting: 1 // -#define wxUSE_GRID 0 +#define wxUSE_GRID 1 + +// wxMiniFrame class: a frame with narrow title bar +// +// Default is 1. +// +// Recommended setting: 1 (it doesn't cost almost anything) +#define wxUSE_MINIFRAME 1 + +// wxComboCtrl and related classes: combobox with custom popup window and +// not necessarily a listbox. +// +// Default is 1. +// +// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it +// it used by wxComboBox +#define wxUSE_COMBOCTRL 1 + +// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox +// items. +// +// Default is 1. +// +// Recommended setting: 1 but can be safely set to 0, except where it is +// needed as a base class for generic wxBitmapComboBox. +#define wxUSE_ODCOMBOBOX 1 + +// wxBitmapComboBox is a combobox that can have images in front of text items. +// +// Default is 1. +// +// Recommended setting: 1 but can be safely set to 0 +#define wxUSE_BITMAPCOMBOBOX 1 + +// wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items +// up and down in it. It is also used as part of wxRearrangeDialog. +// +// Default is 1. +// +// Recommended setting: 1 but can be safely set to 0 (currently used only by +// wxHeaderCtrl) +#define wxUSE_REARRANGECTRL 1 // ---------------------------------------------------------------------------- // Miscellaneous GUI stuff // ---------------------------------------------------------------------------- // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) -#define wxUSE_ACCEL 0 +#define wxUSE_ACCEL 1 // Hotkey support (currently Windows only) -#define wxUSE_HOTKEY 0 +#define wxUSE_HOTKEY 1 // Use wxCaret: a class implementing a "cursor" in a text control (called caret // under Windows). @@ -618,18 +845,19 @@ // Default is 1. // // Recommended setting: 1 (can be safely set to 0, not used by the library) -#define wxUSE_CARET 0 +#define wxUSE_CARET 1 // Use wxDisplay class: it allows enumerating all displays on a system and -// working with them. +// their geometries as well as finding the display on which the given point or +// window lies. // -// Default is 0 because it isn't yet implemented on all platforms +// Default is 1. // // Recommended setting: 1 if you need it, can be safely set to 0 otherwise -#define wxUSE_DISPLAY 0 +#define wxUSE_DISPLAY 1 // Miscellaneous geometry code: needed for Canvas library -#define wxUSE_GEOMETRY 0 +#define wxUSE_GEOMETRY 1 // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and // wxListCtrl. @@ -638,7 +866,7 @@ // // Recommended setting: 1 (set it to 0 if you don't use any of the controls // enumerated above, then this class is mostly useless too) -#define wxUSE_IMAGLIST 0 +#define wxUSE_IMAGLIST 1 // Use wxMenu, wxMenuBar, wxMenuItem. // @@ -647,39 +875,54 @@ // Recommended setting: 1 (can't be disabled under MSW) #define wxUSE_MENUS 1 +// Use wxNotificationMessage. +// +// wxNotificationMessage allows to show non-intrusive messages to the user +// using balloons, banners, popups or whatever is the appropriate method for +// the current platform. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_NOTIFICATION_MESSAGE 1 + // Use wxSashWindow class. // // Default is 1. // // Recommended setting: 1 -#define wxUSE_SASH 0 +#define wxUSE_SASH 1 // Use wxSplitterWindow class. // // Default is 1. // // Recommended setting: 1 -#define wxUSE_SPLITTER 0 +#define wxUSE_SPLITTER 1 // Use wxToolTip and wxWindow::Set/GetToolTip() methods. // // Default is 1. // // Recommended setting: 1 -#define wxUSE_TOOLTIPS 0 +#define wxUSE_TOOLTIPS 1 // wxValidator class and related methods -#define wxUSE_VALIDATORS 0 - -// wxDC cacheing implementation -#define wxUSE_DC_CACHEING 0 - -// Set this to 1 to enable the use of DIB's for wxBitmap to support -// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only. -#define wxUSE_DIB_FOR_BITMAP 0 - -// Set this to 1 to enable wxDIB -#define wxUSE_WXDIB 0 +#define wxUSE_VALIDATORS 1 + +// Use reference counted ID management: this means that wxWidgets will track +// the automatically allocated ids (those used when you use wxID_ANY when +// creating a window, menu or toolbar item &c) instead of just supposing that +// the program never runs out of them. This is mostly useful only under wxMSW +// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where +// long-running programs can run into problems with ids reuse without this. On +// the other platforms, where the ids have the full int range, this shouldn't +// be necessary. +#ifdef __WXMSW__ +#define wxUSE_AUTOID_MANAGEMENT 1 +#else +#define wxUSE_AUTOID_MANAGEMENT 0 +#endif // ---------------------------------------------------------------------------- // common dialogs @@ -692,28 +935,28 @@ // Default is 1 // // Recommended setting: 1 (unless it really doesn't work) -#define wxUSE_COMMON_DIALOGS 0 +#define wxUSE_COMMON_DIALOGS 1 // wxBusyInfo displays window with message when app is busy. Works in same way // as wxBusyCursor -#define wxUSE_BUSYINFO 0 +#define wxUSE_BUSYINFO 1 // Use single/multiple choice dialogs. // // Default is 1 // // Recommended setting: 1 (used in the library itself) -#define wxUSE_CHOICEDLG 0 +#define wxUSE_CHOICEDLG 1 // Use colour picker dialog // // Default is 1 // // Recommended setting: 1 -#define wxUSE_COLOURDLG 0 +#define wxUSE_COLOURDLG 1 // wxDirDlg class for getting a directory name from user -#define wxUSE_DIRDLG 0 +#define wxUSE_DIRDLG 1 // TODO: setting to choose the generic or native one @@ -722,21 +965,21 @@ // Default is 1 // // Recommended setting: 1 (used in many places in the library itself) -#define wxUSE_FILEDLG 0 +#define wxUSE_FILEDLG 1 // Use find/replace dialogs. // // Default is 1 // // Recommended setting: 1 (but may be safely set to 0) -#define wxUSE_FINDREPLDLG 0 +#define wxUSE_FINDREPLDLG 1 // Use font picker dialog // // Default is 1 // // Recommended setting: 1 (used in the library itself) -#define wxUSE_FONTDLG 0 +#define wxUSE_FONTDLG 1 // Use wxMessageDialog and wxMessageBox. // @@ -746,22 +989,30 @@ #define wxUSE_MSGDLG 1 // progress dialog class for lengthy operations -#define wxUSE_PROGRESSDLG 0 +#define wxUSE_PROGRESSDLG 1 // support for startup tips (wxShowTip &c) -#define wxUSE_STARTUP_TIPS 0 +#define wxUSE_STARTUP_TIPS 1 // text entry dialog and wxGetTextFromUser function -#define wxUSE_TEXTDLG 0 +#define wxUSE_TEXTDLG 1 // number entry dialog -#define wxUSE_NUMBERDLG 0 +#define wxUSE_NUMBERDLG 1 // splash screen class -#define wxUSE_SPLASH 0 +#define wxUSE_SPLASH 1 // wizards -#define wxUSE_WIZARDDLG 0 +#define wxUSE_WIZARDDLG 1 + +// Compile in wxAboutBox() function showing the standard "About" dialog. +// +// Default is 1 +// +// Recommended setting: 1 but can be set to 0 to save some space if you don't +// use this function +#define wxUSE_ABOUTDLG 1 // ---------------------------------------------------------------------------- // Metafiles support @@ -780,8 +1031,8 @@ // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS. // // Recommended setting: default or 0 for everything for portable programs. -#define wxUSE_METAFILE 0 -#define wxUSE_ENH_METAFILE 0 +#define wxUSE_METAFILE 1 +#define wxUSE_ENH_METAFILE 1 #define wxUSE_WIN_METAFILES_ALWAYS 0 // ---------------------------------------------------------------------------- @@ -795,18 +1046,18 @@ // Default is 1. // // Recommended setting: 1, can be safely set to 0. -#define wxUSE_MDI 0 +#define wxUSE_MDI 1 // Set to 0 to disable document/view architecture -#define wxUSE_DOC_VIEW_ARCHITECTURE 0 +#define wxUSE_DOC_VIEW_ARCHITECTURE 1 // Set to 0 to disable MDI document/view architecture // // Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE -#define wxUSE_MDI_ARCHITECTURE 0 +#define wxUSE_MDI_ARCHITECTURE 1 // Set to 0 to disable print/preview architecture code -#define wxUSE_PRINTING_ARCHITECTURE 0 +#define wxUSE_PRINTING_ARCHITECTURE 1 // wxHTML sublibrary allows to display HTML in wxWindow programs and much, // much more. @@ -815,18 +1066,28 @@ // // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a // smaller library. -#define wxUSE_HTML 0 +#define wxUSE_HTML 1 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL // headers and libraries to be able to compile the library with wxUSE_GLCANVAS -// set to 1. Note that for some compilers (notably Microsoft Visual C++) you -// will need to manually add opengl32.lib and glu32.lib to the list of -// libraries linked with your program if you use OpenGL. +// set to 1 and, under Windows, also to add opengl32.lib and glu32.lib to the +// list of libraries used to link your application (although this is done +// implicitly for Microsoft Visual C++ users). // -// Default is 0. +// Default is 1 unless the compiler is known to ship without the necessary +// headers (Digital Mars) or the platform doesn't support OpenGL (Windows CE). // -// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise -#define wxUSE_GLCANVAS 0 +// Recommended setting: 1 if you intend to use OpenGL, can be safely set to 0 +// otherwise. +#define wxUSE_GLCANVAS 1 + +// wxRichTextCtrl allows editing of styled text. +// +// Default is 1. +// +// Recommended setting: 1, set to 0 if you want compile a +// smaller library. +#define wxUSE_RICHTEXT 1 // ---------------------------------------------------------------------------- // Data transfer @@ -837,7 +1098,7 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_CLIPBOARD 0 +#define wxUSE_CLIPBOARD 1 // Use wxDataObject and related classes. Needed for clipboard and OLE drag and // drop @@ -845,7 +1106,7 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_DATAOBJ 0 +#define wxUSE_DATAOBJ 1 // Use wxDropTarget and wxDropSource classes for drag and drop (this is // different from "built in" drag and drop in wxTreeCtrl which is always @@ -854,7 +1115,7 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_DRAG_AND_DROP 0 +#define wxUSE_DRAG_AND_DROP 1 // Use wxAccessible for enhanced and customisable accessibility. // Depends on wxUSE_OLE. @@ -869,73 +1130,56 @@ // ---------------------------------------------------------------------------- // wxSingleInstanceChecker class allows to verify at startup if another program -// instance is running (it is only available under Win32) +// instance is running. // // Default is 1 // // Recommended setting: 1 (the class is tiny, disabling it won't save much // space) -#define wxUSE_SNGLINST_CHECKER 0 +#define wxUSE_SNGLINST_CHECKER 1 -#define wxUSE_DRAGIMAGE 0 +#define wxUSE_DRAGIMAGE 1 -#define wxUSE_IPC 0 +#define wxUSE_IPC 1 // 0 for no interprocess comms -#define wxUSE_HELP 0 +#define wxUSE_HELP 1 // 0 for no help facility -#define wxUSE_MS_HTML_HELP 0 - // 0 for no MS HTML Help + +// Should we use MS HTML help for wxHelpController? If disabled, neither +// wxCHMHelpController nor wxBestHelpController are available. +// +// Default is 1 under MSW, 0 is always used for the other platforms. +// +// Recommended setting: 1, only set to 0 if you have trouble compiling +// wxCHMHelpController (could be a problem with really ancient compilers) +#define wxUSE_MS_HTML_HELP 1 + // Use wxHTML-based help controller? -#define wxUSE_WXHTML_HELP 0 +#define wxUSE_WXHTML_HELP 1 -#define wxUSE_RESOURCES 0 - // 0 for no wxGetResource/wxWriteResource -#define wxUSE_CONSTRAINTS 0 +#define wxUSE_CONSTRAINTS 1 // 0 for no window layout constraint system -#define wxUSE_SPLINES 0 +#define wxUSE_SPLINES 1 // 0 for no splines -#define wxUSE_MOUSEWHEEL 0 +#define wxUSE_MOUSEWHEEL 1 // Include mouse wheel support // ---------------------------------------------------------------------------- -// postscript support settings +// wxDC classes for various output formats // ---------------------------------------------------------------------------- // Set to 1 for PostScript device context. #define wxUSE_POSTSCRIPT 0 // Set to 1 to use font metric files in GetTextExtent -#define wxUSE_AFM_FOR_POSTSCRIPT 0 +#define wxUSE_AFM_FOR_POSTSCRIPT 1 -// Set to 0 to disable PostScript print/preview architecture code under Windows -// (just use Windows printing). -#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0 - -// ---------------------------------------------------------------------------- -// database classes -// ---------------------------------------------------------------------------- - -// Define 1 to use ODBC classes -#define wxUSE_ODBC 0 - -// For backward compatibility reasons, this parameter now only controls the -// default scrolling method used by cursors. This default behavior can be -// overriden by setting the second param of wxDB::wxDbGetConnection() or -// wxDb() constructor to indicate whether the connection (and any wxDbTable()s -// that use the connection) should support forward only scrolling of cursors, -// or both forward and backward support for backward scrolling cursors is -// dependent on the data source as well as the ODBC driver being used. -#define wxODBC_FWD_ONLY_CURSORS 0 - -// Default is 0. Set to 1 to use the deprecated classes, enum types, function, -// member variables. With a setting of 1, full backward compatability with the -// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0, -// as future development will be done only on the non-deprecated -// functions/classes/member variables/etc. -#define wxODBC_BACKWARD_COMPATABILITY 0 +// Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows +// to create files in SVG (Scalable Vector Graphics) format. +#define wxUSE_SVG 1 // ---------------------------------------------------------------------------- // other compiler (mis)features @@ -950,14 +1194,15 @@ #define REMOVE_UNUSED_ARG 1 // VC++ 4.2 and above allows and but you can't mix -// them. Set to 1 for , 0 for . Note that VC++ 7.1 -// and later doesn't support wxUSE_IOSTREAMH == 1 and so will be -// used anyhow. +// them. Set this option to 1 to use , 0 to use . // -// Default is 1. +// Note that newer compilers (including VC++ 7.1 and later) don't support +// wxUSE_IOSTREAMH == 1 and so will be used anyhow. // -// Recommended setting: whatever your compiler likes more -#define wxUSE_IOSTREAMH 1 +// Default is 0. +// +// Recommended setting: 0, only set to 1 if you use a really old compiler +#define wxUSE_IOSTREAMH 0 // ---------------------------------------------------------------------------- // image format support @@ -972,130 +1217,62 @@ // which is mentioned if it is the case. // Set to 1 for wxImage support (recommended). -#define wxUSE_IMAGE 0 +#define wxUSE_IMAGE 1 // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB. -#define wxUSE_LIBPNG 0 +#define wxUSE_LIBPNG 1 // Set to 1 for JPEG format support (requires libjpeg) -#define wxUSE_LIBJPEG 0 +#define wxUSE_LIBJPEG 1 // Set to 1 for TIFF format support (requires libtiff) -#define wxUSE_LIBTIFF 0 +#define wxUSE_LIBTIFF 1 + +// Set to 1 for TGA format support (loading only) +#define wxUSE_TGA 1 // Set to 1 for GIF format support -#define wxUSE_GIF 0 +#define wxUSE_GIF 1 // Set to 1 for PNM format support -#define wxUSE_PNM 0 +#define wxUSE_PNM 1 // Set to 1 for PCX format support -#define wxUSE_PCX 0 +#define wxUSE_PCX 1 // Set to 1 for IFF format support (Amiga format) #define wxUSE_IFF 0 // Set to 1 for XPM format support -#define wxUSE_XPM 0 +#define wxUSE_XPM 1 // Set to 1 for MS Icons and Cursors format support -#define wxUSE_ICO_CUR 0 +#define wxUSE_ICO_CUR 1 // Set to 1 to compile in wxPalette class -#define wxUSE_PALETTE 0 +#define wxUSE_PALETTE 1 // ---------------------------------------------------------------------------- -// Windows-only settings +// wxUniversal-only options // ---------------------------------------------------------------------------- -// Set this to 1 if you want to use wxWidgets and MFC in the same program. This -// will override some other settings (see below) -// -// Default is 0. -// -// Recommended setting: 0 unless you really have to use MFC -#define wxUSE_MFC 0 - -// Set this to 1 for generic OLE support: this is required for drag-and-drop, -// clipboard, OLE Automation. Only set it to 0 if your compiler is very old and -// can't compile/doesn't have the OLE headers. -// -// Default is 1. -// -// Recommended setting: 1 -#define wxUSE_OLE 0 - -// Set this to 1 to use Microsoft CTL3D library for "3D-look" under Win16 or NT -// 3.x. This setting is ignored under Win9x and NT 4.0+. -// -// Default is 0 for (most) Win32 (systems), 1 for Win16 -// -// Recommended setting: same as default -#if defined(__WIN95__) -#define wxUSE_CTL3D 0 -#else -#define wxUSE_CTL3D 0 -#endif - -// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for -// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native -// miniframes support instead. -// -// Default is 0 for (most) Win32 (systems), 1 for Win16 -// -#define wxUSE_ITSY_BITSY 0 - -// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH -// which allows to put more than ~32Kb of text in it even under Win9x (NT -// doesn't have such limitation). -// -// Default is 1 for compilers which support it -// -// Recommended setting: 1, only set it to 0 if your compiler doesn't have -// or can't compile -#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__) -#define wxUSE_RICHEDIT 0 +// Set to 1 to enable compilation of all themes, this is the default +#define wxUSE_ALL_THEMES 1 -// TODO: This should be ifdef'ed for any compilers that don't support -// RichEdit 2.0 but do have RichEdit 1.0... -#define wxUSE_RICHEDIT2 0 +// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES +// is unset, if it is set these options are not used; notice that metal theme +// uses Win32 one +#define wxUSE_THEME_GTK 0 +#define wxUSE_THEME_METAL 0 +#define wxUSE_THEME_MONO 0 +#define wxUSE_THEME_WIN32 0 -#else -#define wxUSE_RICHEDIT 0 -#define wxUSE_RICHEDIT2 0 -#endif -// Set this to 1 to enable support for the owner-drawn menu and listboxes. This -// is required by wxUSE_CHECKLISTBOX. -// -// Default is 1. -// -// Recommended setting: 1, set to 0 for a small library size reduction -#define wxUSE_OWNER_DRAWN 0 - -// Set to 1 to compile MS Windows XP theme engine support -#define wxUSE_UXTHEME 0 - -// Set to 1 to auto-adapt to MS Windows XP themes where possible -// (notably, wxNotebook pages) -#define wxUSE_UXTHEME_AUTO 0 +/* --- end common options --- */ // ---------------------------------------------------------------------------- -// obsolete settings +// PalmOS-only settings // ---------------------------------------------------------------------------- -// NB: all settings in this section are obsolete and should not be used/changed -// at all, they will disappear - -// Set to 1 to use PenWindows -#define wxUSE_PENWINDOWS 0 - -// Define 1 to use bitmap messages. -#define wxUSE_BITMAP_MESSAGE 0 - -// If 1, enables provision of run-time type information. -// NOW MANDATORY: don't change. -#define wxUSE_DYNAMIC_CLASSES 1 - #endif - // _WX_SETUP_H_ + // _WX_SETUP_H_