X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/75bce3ad347a1ea870058391e624cccc159737d3..29188693b3b8ba4b07762df012cc652d421dae79:/src/zlib/gzio.c diff --git a/src/zlib/gzio.c b/src/zlib/gzio.c index b780cfef4d..d6b55d5b6c 100644 --- a/src/zlib/gzio.c +++ b/src/zlib/gzio.c @@ -1,8 +1,8 @@ /* gzio.c -- IO on .gz files - * Copyright (C) 1995-1998 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h * - * Compile this file with -DNO_DEFLATE to avoid the compression code. + * Compile this file with -DNO_GZCOMPRESS to avoid the compression code. */ /* @(#) $Id$ */ @@ -11,7 +11,13 @@ #include "zutil.h" +#ifdef NO_DEFLATE /* for compatibility with old definition */ +# define NO_GZCOMPRESS +#endif + +#ifndef NO_DUMMY_DECL struct internal_state {int dummy;}; /* for buggy compilers */ +#endif #ifndef Z_BUFSIZE # ifdef MAXSEG_64K @@ -24,10 +30,26 @@ struct internal_state {int dummy;}; /* for buggy compilers */ # define Z_PRINTF_BUFSIZE 4096 #endif +#ifdef __MVS__ +# pragma map (fdopen , "\174\174FDOPEN") + FILE *fdopen(int, const char *); +#endif + +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern void free OF((voidpf ptr)); +#endif + #define ALLOC(size) malloc(size) #define TRYFREE(p) {if (p) free(p);} -static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */ +/* there is no errno under Windows CE, provide a dummy one to avoid modifying + too much code in this file */ +#ifdef _WIN32_WCE +static int errno; +#endif + +static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */ /* gzip flag byte */ #define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ @@ -49,7 +71,11 @@ typedef struct gz_stream { char *path; /* path name for debugging only */ int transparent; /* 1 if input file is not a .gz file */ char mode; /* 'w' or 'r' */ - long startpos; /* start of compressed data in file (header skipped) */ + z_off_t start; /* start of compressed data in file (header skipped) */ + z_off_t in; /* bytes into deflate or inflate */ + z_off_t out; /* bytes out of deflate or inflate */ + int back; /* one character push-back */ + int last; /* true if push-back is last character */ } gz_stream; @@ -65,19 +91,15 @@ local uLong getLong OF((gz_stream *s)); Opens a gzip (.gz) file for reading or writing. The mode parameter is as in fopen ("rb" or "wb"). The file is given either by file descriptor or path name (if fd == -1). - gz_open return NULL if the file could not be opened or if there was + gz_open returns NULL if the file could not be opened or if there was insufficient memory to allocate the (de)compression state; errno can be checked to distinguish the two cases (if errno is zero, the zlib error is Z_MEM_ERROR). */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -local gzFile gz_open (const char* path, const char* mode, int fd) -#else local gzFile gz_open (path, mode, fd) const char *path; const char *mode; int fd; -#endif { int err; int level = Z_DEFAULT_COMPRESSION; /* compression level */ @@ -101,6 +123,9 @@ local gzFile gz_open (path, mode, fd) s->file = NULL; s->z_err = Z_OK; s->z_eof = 0; + s->in = 0; + s->out = 0; + s->back = EOF; s->crc = crc32(0L, Z_NULL, 0); s->msg = NULL; s->transparent = 0; @@ -116,19 +141,21 @@ local gzFile gz_open (path, mode, fd) if (*p == 'r') s->mode = 'r'; if (*p == 'w' || *p == 'a') s->mode = 'w'; if (*p >= '0' && *p <= '9') { - level = *p - '0'; - } else if (*p == 'f') { - strategy = Z_FILTERED; - } else if (*p == 'h') { - strategy = Z_HUFFMAN_ONLY; - } else { - *m++ = *p; /* copy the mode */ - } + level = *p - '0'; + } else if (*p == 'f') { + strategy = Z_FILTERED; + } else if (*p == 'h') { + strategy = Z_HUFFMAN_ONLY; + } else if (*p == 'R') { + strategy = Z_RLE; + } else { + *m++ = *p; /* copy the mode */ + } } while (*p++ && m != fmode + sizeof(fmode)); if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL; if (s->mode == 'w') { -#ifdef NO_DEFLATE +#ifdef NO_GZCOMPRESS err = Z_STREAM_ERROR; #else err = deflateInit2(&(s->stream), level, @@ -167,15 +194,15 @@ local gzFile gz_open (path, mode, fd) */ fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1], Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE); - s->startpos = 10L; - /* We use 10L instead of ftell(s->file) to because ftell causes an + s->start = 10L; + /* We use 10L instead of ftell(s->file) to because ftell causes an * fflush on some systems. This version of the library doesn't use - * startpos anyway in write mode, so this initialization is not + * start anyway in write mode, so this initialization is not * necessary. */ } else { - check_header(s); /* skip the .gz header */ - s->startpos = (ftell(s->file) - s->stream.avail_in); + check_header(s); /* skip the .gz header */ + s->start = ftell(s->file) - s->stream.avail_in; } return (gzFile)s; @@ -184,13 +211,9 @@ local gzFile gz_open (path, mode, fd) /* =========================================================================== Opens a gzip (.gz) file for reading or writing. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -gzFile ZEXPORT gzopen (const char* path, const char* mode) -#else gzFile ZEXPORT gzopen (path, mode) const char *path; const char *mode; -#endif { return gz_open (path, mode, -1); } @@ -199,15 +222,11 @@ gzFile ZEXPORT gzopen (path, mode) Associate a gzFile with the file descriptor fd. fd is not dup'ed here to mimic the behavio(u)r of fdopen. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -gzFile ZEXPORT gzdopen (int fd, const char* mode) -#else gzFile ZEXPORT gzdopen (fd, mode) int fd; const char *mode; -#endif { - char name[20]; + char name[46]; /* allow for up to 128-bit integers */ if (fd < 0) return (gzFile)Z_NULL; sprintf(name, "", fd); /* for debugging */ @@ -218,14 +237,10 @@ gzFile ZEXPORT gzdopen (fd, mode) /* =========================================================================== * Update the compression level and strategy */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzsetparams (gzFile file, int level, int strategy) -#else int ZEXPORT gzsetparams (file, level, strategy) gzFile file; int level; int strategy; -#endif { gz_stream *s = (gz_stream*)file; @@ -234,11 +249,11 @@ int ZEXPORT gzsetparams (file, level, strategy) /* Make room to allow flushing */ if (s->stream.avail_out == 0) { - s->stream.next_out = s->outbuf; - if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { - s->z_err = Z_ERRNO; - } - s->stream.avail_out = Z_BUFSIZE; + s->stream.next_out = s->outbuf; + if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { + s->z_err = Z_ERRNO; + } + s->stream.avail_out = Z_BUFSIZE; } return deflateParams (&(s->stream), level, strategy); @@ -249,23 +264,19 @@ int ZEXPORT gzsetparams (file, level, strategy) for end of file. IN assertion: the stream s has been sucessfully opened for reading. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -local int get_byte(gz_stream* s) -#else local int get_byte(s) gz_stream *s; -#endif { if (s->z_eof) return EOF; if (s->stream.avail_in == 0) { - errno = 0; - s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file); - if (s->stream.avail_in == 0) { - s->z_eof = 1; - if (ferror(s->file)) s->z_err = Z_ERRNO; - return EOF; - } - s->stream.next_in = s->inbuf; + errno = 0; + s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file); + if (s->stream.avail_in == 0) { + s->z_eof = 1; + if (ferror(s->file)) s->z_err = Z_ERRNO; + return EOF; + } + s->stream.next_in = s->inbuf; } s->stream.avail_in--; return *(s->stream.next_in)++; @@ -280,55 +291,65 @@ local int get_byte(s) s->stream.avail_in is zero for the first time, but may be non-zero for concatenated .gz files. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -local void check_header(gz_stream* s) -#else local void check_header(s) gz_stream *s; -#endif { int method; /* method byte */ int flags; /* flags byte */ uInt len; int c; - /* Check the gzip magic header */ - for (len = 0; len < 2; len++) { - c = get_byte(s); - if (c != gz_magic[len]) { - if (len != 0) s->stream.avail_in++, s->stream.next_in--; - if (c != EOF) { - s->stream.avail_in++, s->stream.next_in--; - s->transparent = 1; - } - s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END; - return; - } + /* Assure two bytes in the buffer so we can peek ahead -- handle case + where first byte of header is at the end of the buffer after the last + gzip segment */ + len = s->stream.avail_in; + if (len < 2) { + if (len) s->inbuf[0] = s->stream.next_in[0]; + errno = 0; + len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file); + if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO; + s->stream.avail_in += len; + s->stream.next_in = s->inbuf; + if (s->stream.avail_in < 2) { + s->transparent = s->stream.avail_in; + return; + } + } + + /* Peek ahead to check the gzip magic header */ + if (s->stream.next_in[0] != gz_magic[0] || + s->stream.next_in[1] != gz_magic[1]) { + s->transparent = 1; + return; } + s->stream.avail_in -= 2; + s->stream.next_in += 2; + + /* Check the rest of the gzip header */ method = get_byte(s); flags = get_byte(s); if (method != Z_DEFLATED || (flags & RESERVED) != 0) { - s->z_err = Z_DATA_ERROR; - return; + s->z_err = Z_DATA_ERROR; + return; } /* Discard time, xflags and OS code: */ for (len = 0; len < 6; len++) (void)get_byte(s); if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */ - len = (uInt)get_byte(s); - len += ((uInt)get_byte(s))<<8; - /* len is garbage if EOF but the loop below will quit anyway */ - while (len-- != 0 && get_byte(s) != EOF) ; + len = (uInt)get_byte(s); + len += ((uInt)get_byte(s))<<8; + /* len is garbage if EOF but the loop below will quit anyway */ + while (len-- != 0 && get_byte(s) != EOF) ; } if ((flags & ORIG_NAME) != 0) { /* skip the original file name */ - while ((c = get_byte(s)) != 0 && c != EOF) ; + while ((c = get_byte(s)) != 0 && c != EOF) ; } if ((flags & COMMENT) != 0) { /* skip the .gz file comment */ - while ((c = get_byte(s)) != 0 && c != EOF) ; + while ((c = get_byte(s)) != 0 && c != EOF) ; } if ((flags & HEAD_CRC) != 0) { /* skip the header crc */ - for (len = 0; len < 2; len++) (void)get_byte(s); + for (len = 0; len < 2; len++) (void)get_byte(s); } s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK; } @@ -337,12 +358,8 @@ local void check_header(s) * Cleanup then free the given gz_stream. Return a zlib error code. Try freeing in the reverse order of allocations. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -local int destroy (gz_stream* s) -#else local int destroy (s) gz_stream *s; -#endif { int err = Z_OK; @@ -351,21 +368,21 @@ local int destroy (s) TRYFREE(s->msg); if (s->stream.state != NULL) { - if (s->mode == 'w') { -#ifdef NO_DEFLATE - err = Z_STREAM_ERROR; + if (s->mode == 'w') { +#ifdef NO_GZCOMPRESS + err = Z_STREAM_ERROR; #else - err = deflateEnd(&(s->stream)); + err = deflateEnd(&(s->stream)); #endif - } else if (s->mode == 'r') { - err = inflateEnd(&(s->stream)); - } + } else if (s->mode == 'r') { + err = inflateEnd(&(s->stream)); + } } if (s->file != NULL && fclose(s->file)) { #ifdef ESPIPE - if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */ + if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */ #endif - err = Z_ERRNO; + err = Z_ERRNO; } if (s->z_err < 0) err = s->z_err; @@ -380,14 +397,10 @@ local int destroy (s) Reads the given number of uncompressed bytes from the compressed file. gzread returns the number of bytes actually read (0 for end of file). */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzread (gzFile file, voidp buf, unsigned len) -#else int ZEXPORT gzread (file, buf, len) gzFile file; voidp buf; unsigned len; -#endif { gz_stream *s = (gz_stream*)file; Bytef *start = (Bytef*)buf; /* starting point for crc computation */ @@ -402,70 +415,89 @@ int ZEXPORT gzread (file, buf, len) s->stream.next_out = (Bytef*)buf; s->stream.avail_out = len; + if (s->stream.avail_out && s->back != EOF) { + *next_out++ = s->back; + s->stream.next_out++; + s->stream.avail_out--; + s->back = EOF; + s->out++; + start++; + if (s->last) { + s->z_err = Z_STREAM_END; + return 1; + } + } + while (s->stream.avail_out != 0) { - if (s->transparent) { - /* Copy first the lookahead bytes: */ - uInt n = s->stream.avail_in; - if (n > s->stream.avail_out) n = s->stream.avail_out; - if (n > 0) { - zmemcpy(s->stream.next_out, s->stream.next_in, n); - next_out += n; - s->stream.next_out = next_out; - s->stream.next_in += n; - s->stream.avail_out -= n; - s->stream.avail_in -= n; - } - if (s->stream.avail_out > 0) { - s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out, - s->file); - } - len -= s->stream.avail_out; - s->stream.total_in += (uLong)len; - s->stream.total_out += (uLong)len; + if (s->transparent) { + /* Copy first the lookahead bytes: */ + uInt n = s->stream.avail_in; + if (n > s->stream.avail_out) n = s->stream.avail_out; + if (n > 0) { + zmemcpy(s->stream.next_out, s->stream.next_in, n); + next_out += n; + s->stream.next_out = next_out; + s->stream.next_in += n; + s->stream.avail_out -= n; + s->stream.avail_in -= n; + } + if (s->stream.avail_out > 0) { + s->stream.avail_out -= + (uInt)fread(next_out, 1, s->stream.avail_out, s->file); + } + len -= s->stream.avail_out; + s->in += len; + s->out += len; if (len == 0) s->z_eof = 1; - return (int)len; - } + return (int)len; + } if (s->stream.avail_in == 0 && !s->z_eof) { errno = 0; - s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file); + s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file); if (s->stream.avail_in == 0) { s->z_eof = 1; - if (ferror(s->file)) { - s->z_err = Z_ERRNO; - break; - } + if (ferror(s->file)) { + s->z_err = Z_ERRNO; + break; + } } s->stream.next_in = s->inbuf; } + s->in += s->stream.avail_in; + s->out += s->stream.avail_out; s->z_err = inflate(&(s->stream), Z_NO_FLUSH); - - if (s->z_err == Z_STREAM_END) { - /* Check CRC and original size */ - s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); - start = s->stream.next_out; - - if (getLong(s) != s->crc || getLong(s) != s->stream.total_out) { - s->z_err = Z_DATA_ERROR; - } else { - /* Check for concatenated .gz files: */ - check_header(s); - if (s->z_err == Z_OK) { - uLong total_in = s->stream.total_in; - uLong total_out = s->stream.total_out; - - inflateReset(&(s->stream)); - s->stream.total_in = total_in; - s->stream.total_out = total_out; - s->crc = crc32(0L, Z_NULL, 0); - } - } - } - if (s->z_err != Z_OK || s->z_eof) break; + s->in -= s->stream.avail_in; + s->out -= s->stream.avail_out; + + if (s->z_err == Z_STREAM_END) { + /* Check CRC and original size */ + s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); + start = s->stream.next_out; + + if (getLong(s) != s->crc) { + s->z_err = Z_DATA_ERROR; + } else { + (void)getLong(s); + /* The uncompressed length returned by above getlong() may be + * different from s->out in case of concatenated .gz files. + * Check for such files: + */ + check_header(s); + if (s->z_err == Z_OK) { + inflateReset(&(s->stream)); + s->crc = crc32(0L, Z_NULL, 0); + } + } + } + if (s->z_err != Z_OK || s->z_eof) break; } s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); + if (len == s->stream.avail_out && + (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO)) + return -1; return (int)(len - s->stream.avail_out); } @@ -474,12 +506,8 @@ int ZEXPORT gzread (file, buf, len) Reads one byte from the compressed file. gzgetc returns this byte or -1 in case of end of file or error. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzgetc(gzFile file) -#else int ZEXPORT gzgetc(file) gzFile file; -#endif { unsigned char c; @@ -487,6 +515,25 @@ int ZEXPORT gzgetc(file) } +/* =========================================================================== + Push one byte back onto the stream. +*/ +int ZEXPORT gzungetc(c, file) + int c; + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF; + s->back = c; + s->out--; + s->last = (s->z_err == Z_STREAM_END); + if (s->last) s->z_err = Z_OK; + s->z_eof = 0; + return c; +} + + /* =========================================================================== Reads bytes from the compressed file until len-1 characters are read, or a newline character is read and transferred to buf, or an @@ -496,14 +543,10 @@ int ZEXPORT gzgetc(file) The current implementation is not optimized at all. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -char* ZEXPORT gzgets(gzFile file, char* buf, int len) -#else char * ZEXPORT gzgets(file, buf, len) gzFile file; char *buf; int len; -#endif { char *b = buf; if (buf == Z_NULL || len <= 0) return Z_NULL; @@ -514,19 +557,15 @@ char * ZEXPORT gzgets(file, buf, len) } -#ifndef NO_DEFLATE +#ifndef NO_GZCOMPRESS /* =========================================================================== Writes the given number of uncompressed bytes into the compressed file. gzwrite returns the number of bytes actually written (0 in case of error). */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzwrite (gzFile file, const voidp buf, unsigned len) -#else int ZEXPORT gzwrite (file, buf, len) gzFile file; - const voidp buf; + voidpc buf; unsigned len; -#endif { gz_stream *s = (gz_stream*)file; @@ -546,7 +585,11 @@ int ZEXPORT gzwrite (file, buf, len) } s->stream.avail_out = Z_BUFSIZE; } + s->in += s->stream.avail_in; + s->out += s->stream.avail_out; s->z_err = deflate(&(s->stream), Z_NO_FLUSH); + s->in -= s->stream.avail_in; + s->out -= s->stream.avail_out; if (s->z_err != Z_OK) break; } s->crc = crc32(s->crc, (const Bytef *)buf, len); @@ -554,6 +597,7 @@ int ZEXPORT gzwrite (file, buf, len) return (int)(len - s->stream.avail_in); } + /* =========================================================================== Converts, formats, and writes the args to the compressed file under control of the format string, as in fprintf. gzprintf returns the number of @@ -568,46 +612,67 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...) va_list va; int len; + buf[sizeof(buf) - 1] = 0; va_start(va, format); -#ifdef HAS_vsnprintf - (void)vsnprintf(buf, sizeof(buf), format, va); -#else +#ifdef NO_vsnprintf +# ifdef HAS_vsprintf_void (void)vsprintf(buf, format, va); -#endif va_end(va); - len = strlen(buf); /* some *sprintf don't return the nb of bytes written */ - if (len <= 0) return 0; - + for (len = 0; len < sizeof(buf); len++) + if (buf[len] == 0) break; +# else + len = vsprintf(buf, format, va); + va_end(va); +# endif +#else +# ifdef HAS_vsnprintf_void + (void)vsnprintf(buf, sizeof(buf), format, va); + va_end(va); + len = strlen(buf); +# else + len = vsnprintf(buf, sizeof(buf), format, va); + va_end(va); +# endif +#endif + if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0) + return 0; return gzwrite(file, buf, (unsigned)len); } #else /* not ANSI C */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORTVA gzprintf (gzFile file const char* format, int a1, int a2, int a3, int a4, - int a5, int a6, int a7, int a8, int a9, int a10, int a11, int a12 - int a13, int a14, int a15, int a16, int a17, int a18, int a19, int a20) -#else int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, - a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) gzFile file; const char *format; int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, - a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; -#endif + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; { char buf[Z_PRINTF_BUFSIZE]; int len; -#ifdef HAS_snprintf - snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); -#else + buf[sizeof(buf) - 1] = 0; +#ifdef NO_snprintf +# ifdef HAS_sprintf_void sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + for (len = 0; len < sizeof(buf); len++) + if (buf[len] == 0) break; +# else + len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +# endif +#else +# ifdef HAS_snprintf_void + snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + len = strlen(buf); +# else + len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +# endif #endif - len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */ - if (len <= 0) return 0; - + if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0) + return 0; return gzwrite(file, buf, len); } #endif @@ -616,13 +681,9 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, Writes c, converted to an unsigned char, into the compressed file. gzputc returns the value that was written, or -1 in case of error. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzputc(gzFile file, int c) -#else int ZEXPORT gzputc(file, c) gzFile file; int c; -#endif { unsigned char cc = (unsigned char) c; /* required for big endian systems */ @@ -635,13 +696,9 @@ int ZEXPORT gzputc(file, c) the terminating null character. gzputs returns the number of characters written, or -1 in case of error. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzputs(gzFile file, const char* s) -#else int ZEXPORT gzputs(file, s) gzFile file; const char *s; -#endif { return gzwrite(file, (char*)s, (unsigned)strlen(s)); } @@ -651,13 +708,9 @@ int ZEXPORT gzputs(file, s) Flushes all pending output into the compressed file. The parameter flush is as in the deflate() function. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -local int do_flush (gzFile file, int flush) -#else local int do_flush (file, flush) gzFile file; int flush; -#endif { uInt len; int done = 0; @@ -679,10 +732,12 @@ local int do_flush (file, flush) s->stream.avail_out = Z_BUFSIZE; } if (done) break; + s->out += s->stream.avail_out; s->z_err = deflate(&(s->stream), flush); + s->out -= s->stream.avail_out; - /* Ignore the second of two consecutive flushes: */ - if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK; + /* Ignore the second of two consecutive flushes: */ + if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK; /* deflate has finished flushing only when it hasn't used up * all the available space in the output buffer: @@ -694,13 +749,9 @@ local int do_flush (file, flush) return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; } -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzflush (gzFile file, int flush) -#else int ZEXPORT gzflush (file, flush) gzFile file; int flush; -#endif { gz_stream *s = (gz_stream*)file; int err = do_flush (file, flush); @@ -709,7 +760,7 @@ int ZEXPORT gzflush (file, flush) fflush(s->file); return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; } -#endif /* NO_DEFLATE */ +#endif /* NO_GZCOMPRESS */ /* =========================================================================== Sets the starting position for the next gzread or gzwrite on the given @@ -719,97 +770,98 @@ int ZEXPORT gzflush (file, flush) SEEK_END is not implemented, returns error. In this version of the library, gzseek can be extremely slow. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -z_off_t ZEXPORT gzseek (gzFile file, z_off_t offset, int whence) -#else z_off_t ZEXPORT gzseek (file, offset, whence) gzFile file; z_off_t offset; int whence; -#endif { gz_stream *s = (gz_stream*)file; if (s == NULL || whence == SEEK_END || - s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) { - return -1L; + s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) { + return -1L; } if (s->mode == 'w') { -#ifdef NO_DEFLATE - return -1L; +#ifdef NO_GZCOMPRESS + return -1L; #else - if (whence == SEEK_SET) { - offset -= s->stream.total_out; - } - if (offset < 0) return -1L; - - /* At this point, offset is the number of zero bytes to write. */ - if (s->inbuf == Z_NULL) { - s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */ - zmemzero(s->inbuf, Z_BUFSIZE); - } - while (offset > 0) { - uInt size = Z_BUFSIZE; - if (offset < Z_BUFSIZE) size = (uInt)offset; - - size = gzwrite(file, s->inbuf, size); - if (size == 0) return -1L; - - offset -= size; - } - return (z_off_t)s->stream.total_in; + if (whence == SEEK_SET) { + offset -= s->in; + } + if (offset < 0) return -1L; + + /* At this point, offset is the number of zero bytes to write. */ + if (s->inbuf == Z_NULL) { + s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */ + if (s->inbuf == Z_NULL) return -1L; + zmemzero(s->inbuf, Z_BUFSIZE); + } + while (offset > 0) { + uInt size = Z_BUFSIZE; + if (offset < Z_BUFSIZE) size = (uInt)offset; + + size = gzwrite(file, s->inbuf, size); + if (size == 0) return -1L; + + offset -= size; + } + return s->in; #endif } /* Rest of function is for reading only */ /* compute absolute position */ if (whence == SEEK_CUR) { - offset += s->stream.total_out; + offset += s->out; } if (offset < 0) return -1L; if (s->transparent) { - /* map to fseek */ - s->stream.avail_in = 0; - s->stream.next_in = s->inbuf; + /* map to fseek */ + s->back = EOF; + s->stream.avail_in = 0; + s->stream.next_in = s->inbuf; if (fseek(s->file, offset, SEEK_SET) < 0) return -1L; - s->stream.total_in = s->stream.total_out = (uLong)offset; - return offset; + s->in = s->out = offset; + return offset; } /* For a negative seek, rewind and use positive seek */ - if ((uLong)offset >= s->stream.total_out) { - offset -= s->stream.total_out; + if (offset >= s->out) { + offset -= s->out; } else if (gzrewind(file) < 0) { - return -1L; + return -1L; } /* offset is now the number of bytes to skip. */ if (offset != 0 && s->outbuf == Z_NULL) { - s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); + s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); + if (s->outbuf == Z_NULL) return -1L; + } + if (offset && s->back != EOF) { + s->back = EOF; + s->out++; + offset--; + if (s->last) s->z_err = Z_STREAM_END; } while (offset > 0) { - int size = Z_BUFSIZE; - if (offset < Z_BUFSIZE) size = (int)offset; + int size = Z_BUFSIZE; + if (offset < Z_BUFSIZE) size = (int)offset; - size = gzread(file, s->outbuf, (uInt)size); - if (size <= 0) return -1L; - offset -= size; + size = gzread(file, s->outbuf, (uInt)size); + if (size <= 0) return -1L; + offset -= size; } - return (z_off_t)s->stream.total_out; + return s->out; } /* =========================================================================== Rewinds input file. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzrewind (gzFile file) -#else int ZEXPORT gzrewind (file) gzFile file; -#endif { gz_stream *s = (gz_stream*)file; @@ -817,16 +869,14 @@ int ZEXPORT gzrewind (file) s->z_err = Z_OK; s->z_eof = 0; + s->back = EOF; s->stream.avail_in = 0; s->stream.next_in = s->inbuf; - - if (s->startpos == 0) { /* not a compressed file */ - rewind(s->file); - return 0; - } - - (void) inflateReset(&s->stream); - return fseek(s->file, s->startpos, SEEK_SET); + s->crc = crc32(0L, Z_NULL, 0); + if (!s->transparent) (void)inflateReset(&s->stream); + s->in = 0; + s->out = 0; + return fseek(s->file, s->start, SEEK_SET); } /* =========================================================================== @@ -834,12 +884,8 @@ int ZEXPORT gzrewind (file) given compressed file. This position represents a number of bytes in the uncompressed data stream. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -z_off_t ZEXPORT gztell (gzFile file) -#else z_off_t ZEXPORT gztell (file) gzFile file; -#endif { return gzseek(file, 0L, SEEK_CUR); } @@ -848,28 +894,38 @@ z_off_t ZEXPORT gztell (file) Returns 1 when EOF has previously been detected reading the given input stream, otherwise zero. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzeof (gzFile file) -#else int ZEXPORT gzeof (file) gzFile file; -#endif { gz_stream *s = (gz_stream*)file; - return (s == NULL || s->mode != 'r') ? 0 : s->z_eof; + /* With concatenated compressed files that can have embedded + * crc trailers, z_eof is no longer the only/best indicator of EOF + * on a gz_stream. Handle end-of-stream error explicitly here. + */ + if (s == NULL || s->mode != 'r') return 0; + if (s->z_eof) return 1; + return s->z_err == Z_STREAM_END; +} + +/* =========================================================================== + Returns 1 if reading and doing so transparently, otherwise zero. +*/ +int ZEXPORT gzdirect (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'r') return 0; + return s->transparent; } /* =========================================================================== Outputs a long in LSB order to the given file */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -local void putLong (FILE* file, uLong x) -#else local void putLong (file, x) FILE *file; uLong x; -#endif { int n; for (n = 0; n < 4; n++) { @@ -879,14 +935,11 @@ local void putLong (file, x) } /* =========================================================================== - Reads a long in LSB order from the given gz_stream. Sets + Reads a long in LSB order from the given gz_stream. Sets z_err in case + of error. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -local uLong getLong (gz_stream* s) -#else local uLong getLong (s) gz_stream *s; -#endif { uLong x = (uLong)get_byte(s); int c; @@ -903,46 +956,43 @@ local uLong getLong (s) Flushes all pending output if necessary, closes the compressed file and deallocates all the (de)compression state. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -int ZEXPORT gzclose (gzFile file) -#else int ZEXPORT gzclose (file) gzFile file; -#endif { - int err; gz_stream *s = (gz_stream*)file; if (s == NULL) return Z_STREAM_ERROR; if (s->mode == 'w') { -#ifdef NO_DEFLATE - return Z_STREAM_ERROR; +#ifdef NO_GZCOMPRESS + return Z_STREAM_ERROR; #else - err = do_flush (file, Z_FINISH); - if (err != Z_OK) return destroy((gz_stream*)file); + if (do_flush (file, Z_FINISH) != Z_OK) + return destroy((gz_stream*)file); putLong (s->file, s->crc); - putLong (s->file, s->stream.total_in); + putLong (s->file, (uLong)(s->in & 0xffffffff)); #endif } return destroy((gz_stream*)file); } +#ifdef STDC +# define zstrerror(errnum) strerror(errnum) +#else +# define zstrerror(errnum) "" +#endif + /* =========================================================================== - Returns the error message for the last error which occured on the + Returns the error message for the last error which occurred on the given compressed file. errnum is set to zlib error number. If an - error occured in the file system and not in the compression library, + error occurred in the file system and not in the compression library, errnum is set to Z_ERRNO and the application may consult errno to get the exact error code. */ -#if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ -const char* ZEXPORT gzerror (gzFile file, int* errnum) -#else -const char* ZEXPORT gzerror (file, errnum) +const char * ZEXPORT gzerror (file, errnum) gzFile file; int *errnum; -#endif { char *m; gz_stream *s = (gz_stream*)file; @@ -954,14 +1004,29 @@ const char* ZEXPORT gzerror (file, errnum) *errnum = s->z_err; if (*errnum == Z_OK) return (const char*)""; - m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg); + m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg); if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err); TRYFREE(s->msg); s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3); + if (s->msg == Z_NULL) return (const char*)ERR_MSG(Z_MEM_ERROR); strcpy(s->msg, s->path); strcat(s->msg, ": "); strcat(s->msg, m); return (const char*)s->msg; } + +/* =========================================================================== + Clear the error and end-of-file flags, and do the same for the real file. +*/ +void ZEXPORT gzclearerr (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL) return; + if (s->z_err != Z_STREAM_END) s->z_err = Z_OK; + s->z_eof = 0; + clearerr(s->file); +}