X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/74afbadc175932c2d28d4da4fc0fd381d9ef006a..6bad4c327cb73463176096cdc8f30e50b6af7978:/include/wx/msw/setup0.h diff --git a/include/wx/msw/setup0.h b/include/wx/msw/setup0.h index 06343cbb48..6e4571f104 100644 --- a/include/wx/msw/setup0.h +++ b/include/wx/msw/setup0.h @@ -6,7 +6,7 @@ // Created: 01/02/97 // RCS-ID: $Id$ // Copyright: (c) Julian Smart -// Licence: wxWindows licence +// Licence: wxWindows license ///////////////////////////////////////////////////////////////////////////// #ifndef _WX_SETUP_H_ @@ -36,6 +36,22 @@ // so there is little advantage to setting it to 1. #define WXWIN_COMPATIBILITY 0 +// This setting determines the compatibility with 2.0 API: set it to 1 to +// enable it +// +// Default is 0. +// +// Recommended setting: 0 (please update your code instead!) +#define WXWIN_COMPATIBILITY_2 0 + +// This setting determines the compatibility with 2.0 API: set it to 1 to +// enable it +// +// Default is 1. +// +// Recommended setting: 0 (please update your code instead!) +#define WXWIN_COMPATIBILITY_2_2 1 + // in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap, // but this is very dangerous because you can mistakenly pass an icon instead // of a bitmap to a function taking "const wxBitmap&" - which will *not* work @@ -49,6 +65,22 @@ // Recommended setting: 0 #define wxICON_IS_BITMAP 0 +// Define as 1 for font size to be backward compatible to 1.63 and earlier. +// 1.64 and later define point sizes to be compatible with Windows. +// +// Default is 0 +// +// Recommended setting: 0 +#define wxFONT_SIZE_COMPATIBILITY 0 + +// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before. +// If migrating between versions, your dialogs may seem to shrink. +// +// Default is 1 +// +// Recommended setting: 0 (the new calculations are more correct!) +#define wxDIALOG_UNIT_COMPATIBILITY 1 + // ---------------------------------------------------------------------------- // debugging settings // ---------------------------------------------------------------------------- @@ -65,14 +97,12 @@ // and if __NO_VC_CRTDBG__ is not defined. // If 1, enables wxDebugContext, for writing error messages to file, etc. If -// __WXDEBUG__ is not defined, will still use normal memory operators. It's -// recommended to set this to 1, since you may well need to output an error log -// in a production version (or non-debugging beta). +// __WXDEBUG__ is not defined, will still use the normal memory operators. // -// Default is 1. +// Default is 0 // -// Recommended setting: 1 but see comment above -#define wxUSE_DEBUG_CONTEXT 1 +// Recommended setting: 0 +#define wxUSE_DEBUG_CONTEXT 0 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF* // __WXDEBUG__ is also defined. @@ -80,29 +110,31 @@ // WARNING: this code may not work with all architectures, especially if // alignment is an issue. This switch is currently ignored for mingw / cygwin // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_MEMORY_TRACING 1 +// Recommended setting: 1 if you are not using a memory debugging tool, else 0 +#define wxUSE_MEMORY_TRACING 0 // In debug mode, cause new and delete to be redefined globally. -// If this causes problems (e.g. link errors), set this to 0. +// If this causes problems (e.g. link errors which is a common problem +// especially if you use another library which also redefines the global new +// and delete), set this to 0. // This switch is currently ignored for mingw / cygwin // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_GLOBAL_MEMORY_OPERATORS 1 +// Recommended setting: 0 +#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If // this causes problems (e.g. link errors), set this to 0. You may need to set // this to 0 if using templates (at least for VC++). This switch is currently -// ignored for mingw / cygwin +// ignored for mingw / cygwin / CodeWarrior // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_DEBUG_NEW_ALWAYS 1 +// Recommended setting: 0 +#define wxUSE_DEBUG_NEW_ALWAYS 0 // wxHandleFatalExceptions() may be used to catch the program faults at run // time and, instead of terminating the program with a usual GPF message box, @@ -129,15 +161,30 @@ // defined as wchar_t, wxString will use Unicode internally. If you set this // to 1, you must use wxT() macro for all literal strings in the program. // -// Unicode is currently only fully supported under Windows NT/2000 (Windows 9x +// Unicode is currently only fully supported under Windows NT/2000/XP (Windows 9x // doesn't support it and the programs compiled in Unicode mode will not run // under 9x). // // Default is 0 // -// Recommended setting: 0 (unless you only plan to use Windows NT/2000) +// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP) #define wxUSE_UNICODE 0 +// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode +// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. This +// setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see +// http://www.microsoft.com/globaldev/Articles/mslu_announce.asp). Note that you +// will have to modify the makefiles to include unicows.lib import library as the first +// library. +// +// If your compiler doesn't have unicows.lib, you can get a version of it at +// http://www.volny.cz/v.slavik/libunicows/ +// +// Default is 0 +// +// Recommended setting: 0 +#define wxUSE_UNICODE_MSLU 0 + // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without // compiling the program in Unicode mode. More precisely, it will be possible // to construct wxString from a wide (Unicode) string and convert any wxString @@ -161,6 +208,22 @@ // Recommended setting: 1 (always) #define wxUSE_LOG 1 +// Support for command line parsing using wxCmdLineParser class. +// +// Default is 1 +// +// Recommended setting: 1 (can be set to 0 if you don't use the cmd line) +#define wxUSE_CMDLINE_PARSER 1 + +// Recommended setting: 1 +#define wxUSE_LOGWINDOW 1 + +// Recommended setting: 1 +#define wxUSE_LOGGUI 1 + +// Recommended setting: 1 +#define wxUSE_LOG_DIALOG 1 + // Support for multithreaded applications: if 1, compile in thread classes // (thread.h) and make the library a bit more thread safe. Although thread // support is quite stable by now, you may still consider recompiling the @@ -180,9 +243,6 @@ // Use standard C++ streams if 1. If 0, use wxWin streams implementation. #define wxUSE_STD_IOSTREAM 0 -// Use serialization (requires utils/serialize) -#define wxUSE_SERIAL 0 - // ---------------------------------------------------------------------------- // non GUI features selection // ---------------------------------------------------------------------------- @@ -200,7 +260,34 @@ // Recommended setting: 1 #define wxUSE_LONGLONG 1 -// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which +// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level +// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. +// +// Default is 1 +// +// Recommended setting: 1 (wxFile is highly recommended as it is required by +// i18n code, wxFileConfig and others) +#define wxUSE_FILE 1 +#define wxUSE_FFILE 1 + +// Use wxFSVolume class providing access to the configured/active mount points +// +// Default is 1 +// +// Recommended setting: 1 (but may be safely disabled if you don't use it) +#define wxUSE_FSVOLUME 1 + +// use wxTextBuffer class: required by wxTextFile +#define wxUSE_TEXTBUFFER 1 + +// use wxTextFile class: requires wxFile and wxTextBuffer, required by +// wxFileConfig +#define wxUSE_TEXTFILE 1 + +// i18n support: _() macro, wxLocale class. Requires wxTextFile. +#define wxUSE_INTL 1 + +// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which // allow to manipulate dates, times and time intervals. wxDateTime replaces the // old wxTime and wxDate classes which are still provided for backwards // compatibility (and implemented in terms of wxDateTime). @@ -212,8 +299,33 @@ // // Requires: wxUSE_LONGLONG // +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_DATETIME 1 + +// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not +// the same as wxDateTime!). These classes are obsolete and shouldn't be used +// in new code +// +// Default is 0 +// +// Recommended setting: 0 unless you have legacy code which uses these classes +#define wxUSE_TIMEDATE 0 + +// Set wxUSE_TIMER to 1 to compile wxTimer class +// +// Default is 1 +// // Recommended setting: 1 -#define wxUSE_TIMEDATE 1 +#define wxUSE_TIMER 1 + +// Use wxStopWatch clas. +// +// Default is 1 +// +// Recommended setting: 1 (needed by wxSocket) +#define wxUSE_STOPWATCH 1 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes // which allow the application to store its settings in the persistent @@ -223,7 +335,7 @@ // See also wxUSE_CONFIG_NATIVE below. // // Recommended setting: 1 -#define wxUSE_CONFIG 1 +#define wxUSE_CONFIG 1 // If wxUSE_CONFIG is 1, you may choose to use either the native config // classes under Windows (using .INI files under Win16 and the registry under @@ -240,56 +352,173 @@ // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows // to connect/disconnect from the network and be notified whenever the dial-up -// network connection is established/terminated. +// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER. // // Default is 1. // // Recommended setting: 1 #define wxUSE_DIALUP_MANAGER 1 -// Compile in wxLibrary class for run-time DLL loading and function calling +// Compile in classes for run-time DLL loading and function calling. +// Required by wxUSE_DIALUP_MANAGER. // // This setting is for Win32 only // // Default is 1. // // Recommended setting: 1 -#define wxUSE_DYNLIB_CLASS 1 +#define wxUSE_DYNLIB_CLASS 1 + +// experimental, don't use for now +#define wxUSE_DYNAMIC_LOADER 1 // Set to 1 to use socket classes #define wxUSE_SOCKETS 1 -// Set to 1 to enable virtual file systems -// (needed by wxHTML) +// Set to 1 to enable virtual file systems (required by wxHTML) #define wxUSE_FILESYSTEM 1 + +// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM) #define wxUSE_FS_ZIP 1 + +// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM) #define wxUSE_FS_INET 1 -// input stream for reading from zip archives +// Set to 1 to compile wxZipInput/OutputStream classes. #define wxUSE_ZIPSTREAM 1 +// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by +// wxUSE_LIBPNG. +#define wxUSE_ZLIB 1 + +// If enabled, the code written by Apple will be used to write, in a portable +// way, float on the disk. See extended.c for the license which is different +// from wxWindows one. +// +// Default is 1. +// +// Recommended setting: 1 unless you don't like the license terms (unlikely) #define wxUSE_APPLE_IEEE 1 - // if enabled, the float codec written by Apple - // will be used to write, in a portable way, - // float on the disk -// use wxFile class - required by i18n code, wxConfig and others - recommended -#define wxUSE_FILE 1 +// Joystick support class +#define wxUSE_JOYSTICK 1 -// use wxTextFile class: requires wxFile, required by wxConfig -#define wxUSE_TEXTFILE 1 +// wxFontMapper class +#define wxUSE_FONTMAP 1 -// i18n support: _() macro, wxLocale class. Requires wxFile -#define wxUSE_INTL 1 +// wxMimeTypesManager class +#define wxUSE_MIMETYPE 1 -#define wxUSE_DYNAMIC_CLASSES 1 - // If 1, enables provision of run-time type information. - // NOW MANDATORY: don't change. +// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP +// or wxURL you need to set this to 1. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_PROTOCOL 1 + +// The settings for the individual URL schemes +#define wxUSE_PROTOCOL_FILE 1 +#define wxUSE_PROTOCOL_FTP 1 +#define wxUSE_PROTOCOL_HTTP 1 + +// Define this to use wxURL class. +#define wxUSE_URL 1 + +// Support for regular expression matching via wxRegEx class: enable this to +// use POSIX regular expressions in your code. You need to compile regex +// library from src/regex to use it under Windows. +// +// Default is 0 +// +// Recommended setting: 1 if your compiler supports it, if it doesn't please +// contribute us a makefile for src/regex for it +#define wxUSE_REGEX 1 + +// wxSystemOptions class +#define wxUSE_SYSTEM_OPTIONS 1 + +// wxWave class +#define wxUSE_WAVE 1 // ---------------------------------------------------------------------------- -// Optional controls +// Individual GUI controls // ---------------------------------------------------------------------------- +// You must set wxUSE_CONTROLS to 1 if you are using any controls at all +// (without it, wxControl class is not compiled) +// +// Default is 1 +// +// Recommended setting: 1 (don't change except for very special programs) +#define wxUSE_CONTROLS 1 + +// wxPopupWindow class is a top level transient window. It is currently used +// to implement wxTipWindow +// +// Default is 1 +// +// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW) +#define wxUSE_POPUPWIN 1 + +// wxTipWindow allows to implement the custom tooltips, it is used by the +// context help classes. Requires wxUSE_POPUPWIN. +// +// Default is 1 +// +// Recommended setting: 1 (may be set to 0) +#define wxUSE_TIPWINDOW 1 + +// Each of the settings below corresponds to one wxWindows control. They are +// all switched on by default but may be disabled if you are sure that your +// program (including any standard dialogs it can show!) doesn't need them and +// if you desperately want to save some space. If you use any of these you must +// set wxUSE_CONTROLS as well. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_BUTTON 1 // wxButton +#define wxUSE_BMPBUTTON 1 // wxBitmapButton +#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl +#define wxUSE_CHECKBOX 1 // wxCheckBox +#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) +#define wxUSE_CHOICE 1 // wxChoice +#define wxUSE_COMBOBOX 1 // wxComboBox +#define wxUSE_GAUGE 1 // wxGauge +#define wxUSE_LISTBOX 1 // wxListBox +#define wxUSE_LISTCTRL 1 // wxListCtrl +#define wxUSE_RADIOBOX 1 // wxRadioBox +#define wxUSE_RADIOBTN 1 // wxRadioButton +#define wxUSE_SCROLLBAR 1 // wxScrollBar +#define wxUSE_SLIDER 1 // wxSlider +#define wxUSE_SPINBTN 1 // wxSpinButton +#define wxUSE_SPINCTRL 1 // wxSpinCtrl +#define wxUSE_STATBOX 1 // wxStaticBox +#define wxUSE_STATLINE 1 // wxStaticLine +#define wxUSE_STATTEXT 1 // wxStaticText +#define wxUSE_STATBMP 1 // wxStaticBitmap +#define wxUSE_TEXTCTRL 1 // wxTextCtrl +#define wxUSE_TOGGLEBTN 1 // requires wxButton +#define wxUSE_TREECTRL 1 // wxTreeCtrl + +// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR +// below either wxStatusBar95 or a generic wxStatusBar will be used. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_STATUSBAR 1 + +// Two status bar implementations are available under Win32: the generic one +// or the wrapper around native control. For native look and feel the native +// version should be used. +// +// Default is 1. +// +// Recommended setting: 1 (there is no advantage in using the generic one) +#define wxUSE_NATIVE_STATUSBAR 1 + // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar // classes at all. Otherwise, use the native toolbar class unless // wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which @@ -304,6 +533,9 @@ #define wxUSE_TOOLBAR_NATIVE 1 #define wxUSE_TOOLBAR_SIMPLE 1 +// this setting is obsolete, value is ignored +#define wxUSE_BUTTONBAR 1 + // wxNotebook is a control with several "tabs" located on one of its sides. It // may be used ot logically organise the data presented to the user instead of // putting everything in one huge dialog. It replaces wxTabControl and related @@ -314,42 +546,13 @@ // Recommended setting: 1 #define wxUSE_NOTEBOOK 1 -// The corresponding controls will be compiled in if wxUSE_ is set to -// 1 and not compiled into the library otherwise. -// -// Default is 1 for everything. -// -// Recommended setting: 1 (library might fail to compile for some combinations -// of disabled controls) -#define wxUSE_CARET 1 -#define wxUSE_CHECKBOX 1 -#define wxUSE_CHECKLISTBOX 1 -#define wxUSE_CHOICE 1 -#define wxUSE_COMBOBOX 1 -#define wxUSE_GAUGE 1 -#define wxUSE_LISTBOX 1 -#define wxUSE_RADIOBOX 1 -#define wxUSE_RADIOBTN 1 -#define wxUSE_SASH 1 // wxSashWindow -#define wxUSE_SCROLLBAR 1 -#define wxUSE_SLIDER 1 -#define wxUSE_SPINBTN 1 -#define wxUSE_SPINCTRL 1 -#define wxUSE_STATLINE 1 -#define wxUSE_STATUSBAR 1 -#define wxUSE_TOOLTIPS 1 // wxToolTip and wxWindow::SetToolTip() - -// Two status bar implementations are available under Win32: the generic one -// or the wrapper around native control. For native look and feel the native -// version should be used. +// wxTabDialog is a generic version of wxNotebook but it is incompatible with +// the new class. It shouldn't be used in new code. // -// Default is 1. +// Default is 0. // -// Recommended setting: 1 -#define wxUSE_NATIVE_STATUSBAR 1 - -// this setting is obsolete, value is ignored -#define wxUSE_BUTTONBAR 1 +// Recommended setting: 0 (use wxNotebook) +#define wxUSE_TAB_DIALOG 0 // wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and // the new, much imporved and enhanced version. The new version is backwards @@ -359,19 +562,77 @@ // Default is 1 for both options. // // Recommended setting: 1 for wxUSE_NEW_GRID, 0 if you have an old code using -// wxGrid and 100% backwards compatible (with all old wxGrid quirks) is +// wxGrid and 100% backwards compatibality (with all old wxGrid quirks) is // essential. // // WIN16/BC++ resets wxUSE_NEW_GRID to 0 because it exceeds the data limit. #define wxUSE_GRID 1 #define wxUSE_NEW_GRID 1 -// wxValidator class and related methods -#define wxUSE_VALIDATORS 1 +// wxProperty[Value/Form/List] classes, used by Dialog Editor +#define wxUSE_PROPSHEET 0 + +// ---------------------------------------------------------------------------- +// Miscellaneous GUI stuff +// ---------------------------------------------------------------------------- // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) #define wxUSE_ACCEL 1 +// Use wxCaret: a class implementing a "cursor" in a text control (called caret +// under Windows). +// +// Default is 1. +// +// Recommended setting: 1 (can be safely set to 0, not used by the library) +#define wxUSE_CARET 1 + +// Miscellaneous geometry code: needed for Canvas library +#define wxUSE_GEOMETRY 1 + +// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and +// wxListCtrl. +// +// Default is 1. +// +// Recommended setting: 1 (set it to 0 if you don't use any of the controls +// enumerated above, then this class is mostly useless too) +#define wxUSE_IMAGLIST 1 + +// Use wxMenu, wxMenuBar, wxMenuItem. +// +// Default is 1. +// +// Recommended setting: 1 (can't be disabled under MSW) +#define wxUSE_MENUS 1 + +// Use wxSashWindow class. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_SASH 1 + +// Use wxSplitterWindow class. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_SPLITTER 1 + +// Use wxToolTip and wxWindow::Set/GetToolTip() methods. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_TOOLTIPS 1 + +// wxValidator class and related methods +#define wxUSE_VALIDATORS 1 + +// wxDC cacheing implementation +#define wxUSE_DC_CACHEING 1 + // ---------------------------------------------------------------------------- // common dialogs // ---------------------------------------------------------------------------- @@ -394,22 +655,75 @@ // Recommended setting: 1 (unless it really doesn't work) #define wxUSE_COMMON_DIALOGS 1 -// text entry dialog and wxGetTextFromUser function -#define wxUSE_TEXTDLG 1 - -// progress dialog class for lengthy operations -#define wxUSE_PROGRESSDLG 1 - // wxBusyInfo displays window with message when app is busy. Works in same way // as wxBusyCursor #define wxUSE_BUSYINFO 1 +// Use single/multiple choice dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_CHOICEDLG 1 + +// Use colour picker dialog +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_COLOURDLG 1 + // wxDirDlg class for getting a directory name from user #define wxUSE_DIRDLG 1 +// TODO: setting to choose the generic or native one + +// Use file open/save dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (used in many places in the library itself) +#define wxUSE_FILEDLG 1 + +// Use find/replace dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (but may be safely set to 0) +#define wxUSE_FINDREPLDLG 1 + +// Use font picker dialog +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_FONTDLG 1 + +// Use wxMessageDialog and wxMessageBox. +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_MSGDLG 1 + +// progress dialog class for lengthy operations +#define wxUSE_PROGRESSDLG 1 + // support for startup tips (wxShowTip &c) #define wxUSE_STARTUP_TIPS 1 +// text entry dialog and wxGetTextFromUser function +#define wxUSE_TEXTDLG 1 + +// number entry dialog +#define wxUSE_NUMBERDLG 1 + +// splash screen class +#define wxUSE_SPLASH 1 + +// wizards +#define wxUSE_WIZARDDLG 1 + // ---------------------------------------------------------------------------- // Metafiles support // ---------------------------------------------------------------------------- @@ -453,48 +767,79 @@ // smaller library. #define wxUSE_HTML 1 -// wxPlot is a class to display functions plots in wxWindow. +// OpenGL canvas +#define wxUSE_GLCANVAS 0 + +// wxTreeLayout class +#define wxUSE_TREELAYOUT 1 + +// ---------------------------------------------------------------------------- +// Data transfer +// ---------------------------------------------------------------------------- + +// Use wxClipboard class for clipboard copy/paste. // // Default is 1. // // Recommended setting: 1 -#define wxUSE_PLOT 1 +#define wxUSE_CLIPBOARD 1 -// OpenGL canvas -#define wxUSE_GLCANVAS 0 +// Use wxDataObject and related classes. Needed for clipboard and OLE drag and +// drop +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_DATAOBJ 1 -// wxTreeLayout class -#define wxUSE_TREELAYOUT 1 +// Use wxDropTarget and wxDropSource classes for drag and drop (this is +// different from "built in" drag and drop in wxTreeCtrl which is always +// available). Requires wxUSE_DATAOBJ. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_DRAG_AND_DROP 1 // ---------------------------------------------------------------------------- // miscellaneous settings // ---------------------------------------------------------------------------- +// wxSingleInstanceChecker class allows to verify at startup if another program +// instance is running (it is only available under Win32) +// +// Default is 1 +// +// Recommended setting: 1 (the class is tiny, disabling it won't save much +// space) +#define wxUSE_SNGLINST_CHECKER 1 + +#define wxUSE_DRAGIMAGE 1 + #define wxUSE_IPC 1 // 0 for no interprocess comms #define wxUSE_HELP 1 // 0 for no help facility -#define wxUSE_MS_HTML_HELP 0 +#define wxUSE_MS_HTML_HELP 1 // 0 for no MS HTML Help + +// Use wxHTML-based help controller? +#define wxUSE_WXHTML_HELP 1 + #define wxUSE_RESOURCES 1 // 0 for no wxGetResource/wxWriteResource #define wxUSE_CONSTRAINTS 1 // 0 for no window layout constraint system -#define wxUSE_CLIPBOARD 1 - // 0 for no clipboard functions - #define wxUSE_SPLINES 1 // 0 for no splines -#define wxUSE_DRAG_AND_DROP 1 - // 0 for no drag and drop - #define wxUSE_XPM_IN_MSW 1 // 0 for no XPM support in wxBitmap. // Default is 1, as XPM is now fully // supported this makes easier the issue // of portable icons and bitmaps. + #define wxUSE_IMAGE_LOADING_IN_MSW 1 // Use dynamic DIB loading/saving code in utils/dib under MSW. #define wxUSE_RESOURCE_LOADING_IN_MSW 1 @@ -503,43 +848,45 @@ #define wxUSE_WX_RESOURCES 1 // Use .wxr resource mechanism (requires PrologIO library) +#define wxUSE_MOUSEWHEEL 1 + // Include mouse wheel support + // ---------------------------------------------------------------------------- -// Postscript support settings +// postscript support settings // ---------------------------------------------------------------------------- +// Set to 1 for PostScript device context. #define wxUSE_POSTSCRIPT 0 - // 0 for no PostScript device context + +// Set to 1 to use font metric files in GetTextExtent #define wxUSE_AFM_FOR_POSTSCRIPT 0 - // 1 to use font metric files in GetTextExtent +// Set to 0 to disable PostScript print/preview architecture code under Windows +// (just use Windows printing). #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 - // Set to 0 to disable PostScript print/preview architecture code - // under Windows (just use Windows printing). // ---------------------------------------------------------------------------- // database classes // ---------------------------------------------------------------------------- +// Define 1 to use ODBC classes #define wxUSE_ODBC 0 - // Define 1 to use ODBC classes +// For backward compatibility reasons, this parameter now only controls the +// default scrolling method used by cursors. This default behavior can be +// overriden by setting the second param of wxDB::wxDbGetConnection() or +// wxDb() constructor to indicate whether the connection (and any wxDbTable()s +// that use the connection) should support forward only scrolling of cursors, +// or both forward and backward support for backward scrolling cursors is +// dependent on the data source as well as the ODBC driver being used. #define wxODBC_FWD_ONLY_CURSORS 1 - // For backward compatibility reasons, this parameter now only - // controls the default scrolling method used by cursors. This - // default behavior can be overriden by setting the second param - // of wxDB::GetDbConnection() to indicate whether the connection - // (and any wxTable()s that use the connection) should support - // forward only scrolling of cursors, or both forward and backward - // Support for backward scrolling cursors is dependent on the - // data source as well as the ODBC driver being used. +// Default is 0. Set to 1 to use the deprecated classes, enum types, function, +// member variables. With a setting of 1, full backward compatability with the +// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0, +// as future development will be done only on the non-deprecated +// functions/classes/member variables/etc. #define wxODBC_BACKWARD_COMPATABILITY 0 - // Default is 0. Set to 1 to use the deprecated classes, enum - // types, function, member variables. With a setting of 1, full - // backward compatability with the 2.0.x release is possible. - // It is STRONGLY recommended that this be set to 0, as - // future development will be done only on the non-deprecated - // functions/classes/member variables/etc. // ---------------------------------------------------------------------------- // other compiler (mis)features @@ -565,76 +912,155 @@ // image format support // ---------------------------------------------------------------------------- -#define wxUSE_ZLIB 1 - // Use zlib for compression in streams and PNG code +// wxImage supports many different image formats which can be configured at +// compile-time. BMP is always supported, others are optional and can be safely +// disabled if you don't plan to use images in such format sometimes saving +// substantial amount of code in the final library. +// +// Some formats require an extra library which is included in wxWin sources +// which is mentioned if it is the case. + +// Set to 1 for wxImage support (recommended). +#define wxUSE_IMAGE 1 + +// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB. #define wxUSE_LIBPNG 1 - // Use PNG bitmap/image code + +// Set to 1 for JPEG format support (requires libjpeg) #define wxUSE_LIBJPEG 1 - // Use JPEG bitmap/image code + +// Set to 1 for TIFF format support (requires libtiff) #define wxUSE_LIBTIFF 1 - // Use TIFF bitmap/image code + +// Set to 1 for GIF format support #define wxUSE_GIF 1 - // Use GIF bitmap/image code + +// Set to 1 for PNM format support #define wxUSE_PNM 1 - // Use PNM bitmap/image code + +// Set to 1 for PCX format support #define wxUSE_PCX 1 - // Use PCX bitmap/image code + +// Set to 1 for IFF format support (Amiga format) +#define wxUSE_IFF 0 + +// Set to 1 for XPM format support +#define wxUSE_XPM 1 + +// Set to 1 for MS Icons and Cursors format support +#define wxUSE_ICO_CUR 1 + +// Set to 1 to compile in wxPalette class +#define wxUSE_PALETTE 1 // ---------------------------------------------------------------------------- // Windows-only settings // ---------------------------------------------------------------------------- -// Make settings compatible with MFC +// Set this to 1 if you want to use wxWindows and MFC in the same program. This +// will override some other settings (see below) +// +// Default is 0. +// +// Recommended setting: 0 unless you really have to use MFC #define wxUSE_MFC 0 -// required for drag-and-drop, clipboard, OLE Automation +// Set this to 1 for generic OLE support: this is required for drag-and-drop, +// clipboard, OLE Automation. Only set it to 0 if your compiler is very old and +// can't compile/doesn't have the OLE headers. +// +// Default is 1. +// +// Recommended setting: 1 #define wxUSE_OLE 1 +// Set this to 1 to use Microsoft CTL3D library for "3D-look" under Win16 or NT +// 3.x. This setting is ignored under Win9x and NT 4.0+. +// +// Default is 0 for (most) Win32 (systems), 1 for Win16 +// +// Recommended setting: same as default #if defined(__WIN95__) #define wxUSE_CTL3D 0 #else -// Define 1 to use Microsoft CTL3D library. #define wxUSE_CTL3D 1 #endif -// can we use RICHEDIT control? +// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for +// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native +// miniframes support instead. +// +// Default is 0 for (most) Win32 (systems), 1 for Win16 +// +// Recommended setting: same as default +#if defined(__WIN95__) +#define wxUSE_ITSY_BITSY 0 +#else +#define wxUSE_ITSY_BITSY 1 +#endif + +// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH +// which allows to put more than ~32Kb of text in it even under Win9x (NT +// doesn't have such limitation). +// +// Default is 1 for compilers which support it +// +// Recommended setting: 1, only set it to 0 if your compiler doesn't have +// or can't compile #if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__) -#define wxUSE_RICHEDIT 1 +#define wxUSE_RICHEDIT 1 + +// TODO: This should be ifdef'ed for any compilers that don't support +// RichEdit 2.0 but do have RichEdit 1.0... +#define wxUSE_RICHEDIT2 1 + #else -#define wxUSE_RICHEDIT 0 +#define wxUSE_RICHEDIT 0 +#define wxUSE_RICHEDIT2 0 #endif -#define wxUSE_ITSY_BITSY 1 - // Define 1 to use Microsoft's ItsyBitsy - // small title bar library, for wxMiniFrame. - // This setting is only used for Win3.1; - // Win9x and NT use native miniframes - // support instead. -#define wxUSE_BITMAP_MESSAGE 1 - // Define 1 to use bitmap messages. -#define wxFONT_SIZE_COMPATIBILITY 0 - // Define 1 for font size to be backward compatible - // to 1.63 and earlier. 1.64 and later define point - // sizes to be compatible with Windows. -#define wxDIALOG_UNIT_COMPATIBILITY 0 - // Set to 0 for accurate dialog units, else - // 1 to be as per 2.1.16 and before. If migrating - // between versions, your dialogs may seem to shrink. +// Set this to 1 to enable support for the owner-drawn menu and listboxes. This +// is required by wxUSE_CHECKLISTBOX. +// +// Default is 1. +// +// Recommended setting: 1, set to 0 for a small library size reduction +#define wxUSE_OWNER_DRAWN 1 + +// ---------------------------------------------------------------------------- +// obsolete settings +// ---------------------------------------------------------------------------- + +// NB: all settings in this section are obsolete and should not be used/changed +// at all, they will disappear + +// Set to 1 to use PenWindows #define wxUSE_PENWINDOWS 0 - // Set to 1 to use PenWindows -#define wxUSE_OWNER_DRAWN 1 - // Owner-drawn menus and listboxes +// Define 1 to use bitmap messages. +#define wxUSE_BITMAP_MESSAGE 1 + +// If 1, enables provision of run-time type information. +// NOW MANDATORY: don't change. +#define wxUSE_DYNAMIC_CLASSES 1 + +// ---------------------------------------------------------------------------- +// disable the settings which don't work for some compilers +// ---------------------------------------------------------------------------- -#if (defined(__MINGW32__) || defined(__CYGWIN__)) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) #ifndef wxUSE_NORLANDER_HEADERS +#if (defined(__MINGW32__) || defined(__CYGWIN__)) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) # define wxUSE_NORLANDER_HEADERS 1 +#else +# define wxUSE_NORLANDER_HEADERS 0 #endif #endif -// ---------------------------------------------------------------------------- -// disable the settings which don't work for some compilers -// ---------------------------------------------------------------------------- +// wxUSE_DEBUG_NEW_ALWAYS doesn't work with CodeWarrior +#if defined(__MWERKS__) + #undef wxUSE_DEBUG_NEW_ALWAYS + #define wxUSE_DEBUG_NEW_ALWAYS 0 +#endif #if defined(__GNUWIN32__) // These don't work as expected for mingw32 and cygwin32 @@ -647,9 +1073,6 @@ #undef wxUSE_DEBUG_NEW_ALWAYS #define wxUSE_DEBUG_NEW_ALWAYS 0 -#undef wxUSE_MS_HTML_HELP -#define wxUSE_MS_HTML_HELP 0 - // Cygwin betas don't have wcslen #if defined(__CYGWIN__) || defined(__CYGWIN32__) # if ! ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) @@ -669,12 +1092,6 @@ #define wxUSE_DEBUG_NEW_ALWAYS 0 #endif // wxUSE_MFC -// ODBC classes aren't Unicode-compatible yet -#if wxUSE_UNICODE -#undef wxUSE_ODBC -#define wxUSE_ODBC 0 -#endif - #if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !wxUSE_NORLANDER_HEADERS) // Can't use OLE drag and drop in Windows 3.1 because we don't know how // to implement UUIDs @@ -740,13 +1157,7 @@ #define wxUSE_LIBJPEG 0 #endif -#if defined(__BORLANDC__) -// Need a BC++-specific htmlhelp.lib before we can enable this -#undef wxUSE_MS_HTML_HELP -#define wxUSE_MS_HTML_HELP 0 -#endif - -// wxUSE_DBEUG_NEW_ALWAYS = 1 not compatible with BC++ in DLL mode +// wxUSE_DEBUG_NEW_ALWAYS = 1 not compatible with BC++ in DLL mode #if defined(__BORLANDC__) && (defined(WXMAKINGDLL) || defined(WXUSINGDLL)) #undef wxUSE_DEBUG_NEW_ALWAYS #define wxUSE_DEBUG_NEW_ALWAYS 0 @@ -758,9 +1169,6 @@ #define wxUSE_GLCANVAS 0 */ -#undef wxUSE_MS_HTML_HELP -#define wxUSE_MS_HTML_HELP 0 - #undef wxUSE_WCHAR_T #define wxUSE_WCHAR_T 0 #endif @@ -811,29 +1219,5 @@ #endif // Win16 -// ---------------------------------------------------------------------------- -// check the settings consistency: do it here to abort compilation immediately -// and not almost in the very end when the relevant file fails to compile and -// you need to modify setup.h and rebuild everything -// ---------------------------------------------------------------------------- - -#if wxUSE_TIMEDATE && !wxUSE_LONGLONG - #error wxDateTime requires wxLongLong -#endif - -#if wxUSE_TEXTFILE && !wxUSE_FILE - #error You cannot compile wxTextFile without wxFile -#endif - -#if wxUSE_FILESYSTEM && !wxUSE_STREAMS - #error You cannot compile virtual file systems without wxUSE_STREAMS -#endif - -#if wxUSE_HTML && !wxUSE_FILESYSTEM - #error You cannot compile wxHTML without virtual file systems -#endif - -// add more tests here... - #endif // _WX_SETUP_H_