X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/738cadd897a67c92fc67c7aa84511cb2fb1f5839..2bf8f4c0d57be03ee27a0f84d041ebcb99202497:/include/wx/msw/setup0.h diff --git a/include/wx/msw/setup0.h b/include/wx/msw/setup0.h index 88699aa4e5..897bcfe109 100644 --- a/include/wx/msw/setup0.h +++ b/include/wx/msw/setup0.h @@ -13,7 +13,6 @@ #define _WX_SETUP_H_ /* --- start common options --- */ - // ---------------------------------------------------------------------------- // global settings // ---------------------------------------------------------------------------- @@ -28,15 +27,15 @@ // compatibility settings // ---------------------------------------------------------------------------- -// This setting determines the compatibility with 2.2 API: set it to 1 to +// This setting determines the compatibility with 2.4 API: set it to 1 to // enable it but please consider updating your code instead. // // Default is 0 // // Recommended setting: 0 (please update your code) -#define WXWIN_COMPATIBILITY_2_2 0 +#define WXWIN_COMPATIBILITY_2_4 0 -// This setting determines the compatibility with 2.4 API: set it to 0 to +// This setting determines the compatibility with 2.6 API: set it to 0 to // flag all cases of using deprecated functions. // // Default is 1 but please try building your code with 0 as the default will @@ -44,15 +43,16 @@ // in the version after it completely. // // Recommended setting: 0 (please update your code) -#define WXWIN_COMPATIBILITY_2_4 1 +#define WXWIN_COMPATIBILITY_2_6 1 -// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before. -// If migrating between versions, your dialogs may seem to shrink. +// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when +// default system font is used for wxWindow::GetCharWidth/Height() instead of +// the current font. // -// Default is 1 +// Default is 0 // -// Recommended setting: 0 (the new calculations are more correct!) -#define wxDIALOG_UNIT_COMPATIBILITY 1 +// Recommended setting: 0 +#define wxDIALOG_UNIT_COMPATIBILITY 0 // ---------------------------------------------------------------------------- // debugging settings @@ -120,12 +120,26 @@ // Default is 1 // // Recommended setting: 1 if your compiler supports it. -#if defined(_MSC_VER) || \ - (defined(__BORLANDC__) && __BORLANDC__ >= 0x0550) - #define wxUSE_ON_FATAL_EXCEPTION 1 -#else - #define wxUSE_ON_FATAL_EXCEPTION 0 -#endif +#define wxUSE_ON_FATAL_EXCEPTION 1 + +// Set this to 1 to be able to generate a human-readable (unlike +// machine-readable minidump created by wxCrashReport::Generate()) stack back +// trace when your program crashes using wxStackWalker +// +// Default is 1 if supported by the compiler. +// +// Recommended setting: 1, set to 0 if your programs never crash +#define wxUSE_STACKWALKER 1 + +// Set this to 1 to compile in wxDebugReport class which allows you to create +// and optionally upload to your web site a debug report consisting of back +// trace of the crash (if wxUSE_STACKWALKER == 1) and other information. +// +// Default is 1 if supported by the compiler. +// +// Recommended setting: 1, it is compiled into a separate library so there +// is no overhead if you don't use it +#define wxUSE_DEBUGREPORT 1 // ---------------------------------------------------------------------------- // Unicode support @@ -146,22 +160,6 @@ #define wxUSE_UNICODE 0 #endif -// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode -// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. -// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see -// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note -// that you will have to modify the makefiles to include unicows.lib import -// library as the first library (see installation instructions in install.txt -// to learn how to do it when building the library or samples). -// -// If your compiler doesn't have unicows.lib, you can get a version of it at -// http://libunicows.sourceforge.net -// -// Default is 0 -// -// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems) -#define wxUSE_UNICODE_MSLU 0 - // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without // compiling the program in Unicode mode. More precisely, it will be possible // to construct wxString from a wide (Unicode) string and convert any wxString @@ -183,6 +181,9 @@ // code will lead to undefined behaviour -- but the code itself will be // slightly smaller and faster. // +// Note that like wxUSE_THREADS this option is automatically set to 0 if +// wxNO_EXCEPTIONS is defined. +// // Default is 1 // // Recommended setting: depends on whether you intend to use C++ exceptions @@ -236,19 +237,58 @@ // library without it if you have no use for it - this will result in a // somewhat smaller and faster operation. // -// This is ignored under Win16, threads are only supported under Win32. +// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset +// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in +// build/msw/config.* file this value will have no effect. // // Default is 1 // // Recommended setting: 0 unless you do plan to develop MT applications #define wxUSE_THREADS 1 -// If enabled (1), compiles wxWidgets streams classes +// If enabled, compiles wxWidgets streams classes +// +// wx stream classes are used for image IO, process IO redirection, network +// protocols implementation and much more and so disabling this results in a +// lot of other functionality being lost. +// +// Default is 1 +// +// Recommended setting: 1 as setting it to 0 disables many other things #define wxUSE_STREAMS 1 -// Use standard C++ streams if 1. If 0, use wxWin streams implementation. +// Use standard C++ streams if 1 instead of wx streams in some places. If +// disabled (default), wx streams are used everywhere and wxWidgets doesn't +// depend on the standard streams library. +// +// Notice that enabling this does not replace wx streams with std streams +// everywhere, in a lot of places wx streams are used no matter what. +// +// Default is 0 +// +// Recommended setting: 1 if you use the standard streams anyhow and so +// dependency on the standard streams library is not a +// problem #define wxUSE_STD_IOSTREAM 0 +// Enable conversion to standard C++ string if 1. +#define wxUSE_STD_STRING 1 + +// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf. +// Note that if the system's implementation does not support positional +// parameters, setting this to 1 forces the use of the wxWidgets implementation +// of wxVsnprintf. The standard vsnprintf() supports positional parameters on +// many Unix systems but usually doesn't under Windows. +// +// Positional parameters are very useful when translating a program since using +// them in formatting strings allow translators to correctly reorder the +// translated sentences. +// +// Default is 1 +// +// Recommended setting: 1 if you want to support multiple languages +#define wxUSE_PRINTF_POS_PARAMS 1 + // ---------------------------------------------------------------------------- // non GUI features selection // ---------------------------------------------------------------------------- @@ -283,6 +323,14 @@ // Recommended setting: 1 (but may be safely disabled if you don't use it) #define wxUSE_FSVOLUME 1 +// Use wxStandardPaths class which allows to retrieve some standard locations +// in the file system +// +// Default is 1 +// +// Recommended setting: 1 (may be disabled to save space, but not much) +#define wxUSE_STDPATHS 1 + // use wxTextBuffer class: required by wxTextFile #define wxUSE_TEXTBUFFER 1 @@ -378,12 +426,21 @@ // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM) #define wxUSE_FS_ZIP 1 +// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM) +#define wxUSE_FS_ARCHIVE 1 + // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM) #define wxUSE_FS_INET 1 +// wxArchive classes for accessing archives such as zip and tar +#define wxUSE_ARCHIVE_STREAMS 1 + // Set to 1 to compile wxZipInput/OutputStream classes. #define wxUSE_ZIPSTREAM 1 +// Set to 1 to compile wxTarInput/OutputStream classes. +#define wxUSE_TARSTREAM 1 + // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by // wxUSE_LIBPNG #define wxUSE_ZLIB 1 @@ -432,6 +489,15 @@ // This code is experimental and subject to change. #define wxUSE_URL_NATIVE 0 +// Support for wxVariant class used in several places throughout the library, +// notably in wxDataViewCtrl API. +// +// Default is 1. +// +// Recommended setting: 1 unless you want to reduce the library size as much as +// possible in which case setting this to 0 can gain up to 100KB. +#define wxUSE_VARIANT 1 + // Support for regular expression matching via wxRegEx class: enable this to // use POSIX regular expressions in your code. You need to compile regex // library from src/regex to use it under Windows. @@ -452,22 +518,15 @@ // // Default is 1. // -// Recommended setting: 1 +// Recommended setting: 1 #define wxUSE_MEDIACTRL 1 -// Use QuickTime -// -// Default is 0 -// -// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0 -#define wxUSE_QUICKTIME 0 - -// Use DirectShow (requires linkage to strmiids.lib) +// Use GStreamer for Unix (req a lot of dependancies) // // Default is 0 // -// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0 -#define wxUSE_DIRECTSHOW 0 +// Recommended setting: 1 (wxMediaCtrl won't work by default without it) +#define wxUSE_GSTREAMER 0 // Use wxWidget's XRC XML-based resource system. Recommended. // @@ -488,6 +547,28 @@ # define wxUSE_XML 0 #endif +// Use wxWidget's AUI docking system +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_AUI 1 + + +// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced +// 2D drawing API. (Still somewhat experimental) +// +// Please note that on Windows you will need to link with gdiplus.lib (use +// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your +// application if you want it to be runnable on pre-XP systems. +// +// Default is 0 +// +// Recommended setting: 1 +#ifndef wxUSE_GRAPHICS_CONTEXT +#define wxUSE_GRAPHICS_CONTEXT 0 +#endif + // ---------------------------------------------------------------------------- // Individual GUI controls // ---------------------------------------------------------------------------- @@ -525,30 +606,38 @@ // Default is 1 // // Recommended setting: 1 -#define wxUSE_BUTTON 1 // wxButton -#define wxUSE_BMPBUTTON 1 // wxBitmapButton -#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl -#define wxUSE_CHECKBOX 1 // wxCheckBox -#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) -#define wxUSE_CHOICE 1 // wxChoice -#define wxUSE_COMBOBOX 1 // wxComboBox -#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl -#define wxUSE_GAUGE 1 // wxGauge -#define wxUSE_LISTBOX 1 // wxListBox -#define wxUSE_LISTCTRL 1 // wxListCtrl -#define wxUSE_RADIOBOX 1 // wxRadioBox -#define wxUSE_RADIOBTN 1 // wxRadioButton -#define wxUSE_SCROLLBAR 1 // wxScrollBar -#define wxUSE_SLIDER 1 // wxSlider -#define wxUSE_SPINBTN 1 // wxSpinButton -#define wxUSE_SPINCTRL 1 // wxSpinCtrl -#define wxUSE_STATBOX 1 // wxStaticBox -#define wxUSE_STATLINE 1 // wxStaticLine -#define wxUSE_STATTEXT 1 // wxStaticText -#define wxUSE_STATBMP 1 // wxStaticBitmap -#define wxUSE_TEXTCTRL 1 // wxTextCtrl -#define wxUSE_TOGGLEBTN 1 // requires wxButton -#define wxUSE_TREECTRL 1 // wxTreeCtrl +#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl +#define wxUSE_BUTTON 1 // wxButton +#define wxUSE_BMPBUTTON 1 // wxBitmapButton +#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl +#define wxUSE_CHECKBOX 1 // wxCheckBox +#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) +#define wxUSE_CHOICE 1 // wxChoice +#define wxUSE_COLLPANE 1 // wxCollapsiblePane +#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl +#define wxUSE_COMBOBOX 1 // wxComboBox +#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl +#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl +#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl +#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl +#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl +#define wxUSE_GAUGE 1 // wxGauge +#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl +#define wxUSE_LISTBOX 1 // wxListBox +#define wxUSE_LISTCTRL 1 // wxListCtrl +#define wxUSE_RADIOBOX 1 // wxRadioBox +#define wxUSE_RADIOBTN 1 // wxRadioButton +#define wxUSE_SCROLLBAR 1 // wxScrollBar +#define wxUSE_SLIDER 1 // wxSlider +#define wxUSE_SPINBTN 1 // wxSpinButton +#define wxUSE_SPINCTRL 1 // wxSpinCtrl +#define wxUSE_STATBOX 1 // wxStaticBox +#define wxUSE_STATLINE 1 // wxStaticLine +#define wxUSE_STATTEXT 1 // wxStaticText +#define wxUSE_STATBMP 1 // wxStaticBitmap +#define wxUSE_TEXTCTRL 1 // wxTextCtrl +#define wxUSE_TOGGLEBTN 1 // requires wxButton +#define wxUSE_TREECTRL 1 // wxTreeCtrl // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR // below either wxStatusBar95 or a generic wxStatusBar will be used. @@ -565,11 +654,7 @@ // Default is 1 for the platforms where native status bar is supported. // // Recommended setting: 1 (there is no advantage in using the generic one) -#if defined(__WXMSW__) || defined(__WXMAC__) #define wxUSE_NATIVE_STATUSBAR 1 -#else -#define wxUSE_NATIVE_STATUSBAR 0 -#endif // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar // classes at all. Otherwise, use the native toolbar class unless @@ -607,6 +692,22 @@ // Recommended setting: 1 #define wxUSE_CHOICEBOOK 1 +// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of +// the tabs +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_TREEBOOK 1 + +// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of +// tabs +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_TOOLBOOK 1 + // wxTabDialog is a generic version of wxNotebook but it is incompatible with // the new class. It shouldn't be used in new code. // @@ -631,6 +732,31 @@ // Recommended setting: 1 (it doesn't cost almost anything) #define wxUSE_MINIFRAME 1 +// wxComboCtrl and related classes: combobox with custom popup window and +// not necessarily a listbox. +// +// Default is 1. +// +// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it +// it used by wxComboBox +#define wxUSE_COMBOCTRL 1 + +// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox +// items. +// +// Default is 1. +// +// Recommended setting: 1 but can be safely set to 0, except where it is +// needed as a base class for generic wxBitmapComboBox. +#define wxUSE_ODCOMBOBOX 1 + +// wxBitmapComboBox is a combobox that can have images in front of text items. +// +// Default is 1. +// +// Recommended setting: 1 but can be safely set to 0 +#define wxUSE_BITMAPCOMBOBOX 1 + // ---------------------------------------------------------------------------- // Miscellaneous GUI stuff // ---------------------------------------------------------------------------- @@ -650,12 +776,13 @@ #define wxUSE_CARET 1 // Use wxDisplay class: it allows enumerating all displays on a system and -// working with them. +// their geometries as well as finding the display on which the given point or +// window lies. // -// Default is 0 because it isn't yet implemented on all platforms +// Default is 1. // // Recommended setting: 1 if you need it, can be safely set to 0 otherwise -#define wxUSE_DISPLAY 0 +#define wxUSE_DISPLAY 1 // Miscellaneous geometry code: needed for Canvas library #define wxUSE_GEOMETRY 1 @@ -782,6 +909,14 @@ // wizards #define wxUSE_WIZARDDLG 1 +// Compile in wxAboutBox() function showing the standard "About" dialog. +// +// Default is 1 +// +// Recommended setting: 1 but can be set to 0 to save some space if you don't +// use this function +#define wxUSE_ABOUTDLG 1 + // ---------------------------------------------------------------------------- // Metafiles support // ---------------------------------------------------------------------------- @@ -847,6 +982,14 @@ // Recommended setting: 1 if you intend to use OpenGL, 0 otherwise #define wxUSE_GLCANVAS 0 +// wxRichTextCtrl allows editing of styled text. +// +// Default is 1. +// +// Recommended setting: 1, set to 0 if you want compile a +// smaller library. +#define wxUSE_RICHTEXT 1 + // ---------------------------------------------------------------------------- // Data transfer // ---------------------------------------------------------------------------- @@ -902,8 +1045,16 @@ // 0 for no interprocess comms #define wxUSE_HELP 1 // 0 for no help facility + +// Should we use MS HTML help for wxHelpController? If disabled, neither +// wxCHMHelpController nor wxBestHelpController are available. +// +// Default is 1 +// +// Recommended setting: 1, only set to 0 if you have trouble compiling +// wxCHMHelpController (could be a problem with really ancient compilers) #define wxUSE_MS_HTML_HELP 1 - // 0 for no MS HTML Help + // Use wxHTML-based help controller? #define wxUSE_WXHTML_HELP 1 @@ -929,10 +1080,6 @@ // Set to 1 to use font metric files in GetTextExtent #define wxUSE_AFM_FOR_POSTSCRIPT 1 -// Set to 0 to disable PostScript print/preview architecture code under Windows -// (just use Windows printing). -#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 - // ---------------------------------------------------------------------------- // database classes // ---------------------------------------------------------------------------- @@ -950,7 +1097,7 @@ #define wxODBC_FWD_ONLY_CURSORS 1 // Default is 0. Set to 1 to use the deprecated classes, enum types, function, -// member variables. With a setting of 1, full backward compatability with the +// member variables. With a setting of 1, full backward compatibility with the // 2.0.x release is possible. It is STRONGLY recommended that this be set to 0, // as future development will be done only on the non-deprecated // functions/classes/member variables/etc. @@ -1002,6 +1149,9 @@ // Set to 1 for TIFF format support (requires libtiff) #define wxUSE_LIBTIFF 1 +// Set to 1 for TGA format support (loading only) +#define wxUSE_TGA 1 + // Set to 1 for GIF format support #define wxUSE_GIF 1 @@ -1023,12 +1173,46 @@ // Set to 1 to compile in wxPalette class #define wxUSE_PALETTE 1 +// ---------------------------------------------------------------------------- +// wxUniversal-only options +// ---------------------------------------------------------------------------- + +// Set to 1 to enable compilation of all themes, this is the default +#define wxUSE_ALL_THEMES 1 + +// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES +// is unset, if it is set these options are not used; notice that metal theme +// uses Win32 one +#define wxUSE_THEME_GTK 0 +#define wxUSE_THEME_METAL 0 +#define wxUSE_THEME_MONO 0 +#define wxUSE_THEME_WIN32 0 + + /* --- end common options --- */ // ---------------------------------------------------------------------------- // Windows-only settings // ---------------------------------------------------------------------------- +// Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode +// and want to run your programs under Windows 9x and not only NT/2000/XP. +// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see +// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note +// that you will have to modify the makefiles to include unicows.lib import +// library as the first library (see installation instructions in install.txt +// to learn how to do it when building the library or samples). +// +// If your compiler doesn't have unicows.lib, you can get a version of it at +// http://libunicows.sourceforge.net +// +// Default is 0 +// +// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems) +#ifndef wxUSE_UNICODE_MSLU + #define wxUSE_UNICODE_MSLU 0 +#endif + // Set this to 1 if you want to use wxWidgets and MFC in the same program. This // will override some other settings (see below) // @@ -1046,6 +1230,22 @@ // Recommended setting: 1 #define wxUSE_OLE 1 +// Set this to 1 to enable wxAutomationObject class. +// +// Default is 1. +// +// Recommended setting: 1 if you need to control other applications via OLE +// Automation, can be safely set to 0 otherwise +#define wxUSE_OLE_AUTOMATION 1 + +// Set this to 1 to enable wxActiveXContainer class allowing to embed OLE +// controls in wx. +// +// Default is 1. +// +// Recommended setting: 1, required by wxMediaCtrl +#define wxUSE_ACTIVEX 1 + // wxDC cacheing implementation #define wxUSE_DC_CACHEING 1 @@ -1053,16 +1253,17 @@ // bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only. #define wxUSE_DIB_FOR_BITMAP 0 -// Set this to 1 to enable wxDIB -#define wxUSE_WXDIB 1 - -// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for -// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native -// miniframes support instead. +// Set this to 1 to enable wxDIB class used internally for manipulating +// wxBitmao data. // -// Default is 0 for (most) Win32 (systems), 1 for Win16 +// Default is 1, set it to 0 only if you don't use wxImage neither // -#define wxUSE_ITSY_BITSY 0 +// Recommended setting: 1 (without it conversion to/from wxImage won't work) +#define wxUSE_WXDIB 1 + +// Set to 0 to disable PostScript print/preview architecture code under Windows +// (just use Windows printing). +#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH // which allows to put more than ~32Kb of text in it even under Win9x (NT @@ -1072,18 +1273,15 @@ // // Recommended setting: 1, only set it to 0 if your compiler doesn't have // or can't compile -#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__) #define wxUSE_RICHEDIT 1 -// TODO: This should be ifdef'ed for any compilers that don't support -// RichEdit 2.0 but do have RichEdit 1.0... +// Set this to 1 to use extra features of richedit v2 and later controls +// +// Default is 1 for compilers which support it +// +// Recommended setting: 1 #define wxUSE_RICHEDIT2 1 -#else -#define wxUSE_RICHEDIT 0 -#define wxUSE_RICHEDIT2 0 -#endif - // Set this to 1 to enable support for the owner-drawn menu and listboxes. This // is required by wxUSE_CHECKLISTBOX. // @@ -1099,6 +1297,21 @@ // (notably, wxNotebook pages) #define wxUSE_UXTHEME_AUTO 1 +// Set to 1 to use InkEdit control (Tablet PC), if available +#define wxUSE_INKEDIT 0 + +// ---------------------------------------------------------------------------- +// Generic versions of native controls +// ---------------------------------------------------------------------------- + +// Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the +// native wxDatePickerCtrl +// +// Default is 0. +// +// Recommended setting: 0, this is mainly used for testing +#define wxUSE_DATEPICKCTRL_GENERIC 0 + // ---------------------------------------------------------------------------- // Crash debugging helpers // ---------------------------------------------------------------------------- @@ -1106,20 +1319,11 @@ // Set this to 1 to be able to use wxCrashReport::Generate() to create mini // dumps of your program when it crashes (or at any other moment) // -// Default is 1 if supported by the compiler. +// Default is 1 if supported by the compiler (VC++ and recent BC++ only). // // Recommended setting: 1, set to 0 if your programs never crash #define wxUSE_CRASHREPORT 1 -// Set this to 1 to be able to generate a human-readable (unlike -// machine-readable minidumop created by wxCrashReport::Generate()) stack back -// trace when your program crashes using wxStackWalker -// -// Default is 1 if supported by the compiler. -// -// Recommended setting: 1, set to 0 if your programs never crash -#define wxUSE_STACKWALKER 1 - // ---------------------------------------------------------------------------- // obsolete settings // ---------------------------------------------------------------------------- @@ -1127,9 +1331,6 @@ // NB: all settings in this section are obsolete and should not be used/changed // at all, they will disappear -// Set to 1 to use PenWindows -#define wxUSE_PENWINDOWS 0 - // Define 1 to use bitmap messages. #define wxUSE_BITMAP_MESSAGE 1