X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/6ae7410f5522bc6047b842359318fc9521353186..066f3611df971be93b2ec46b82c2f05f3ff9a422:/docs/latex/wx/dc.tex

diff --git a/docs/latex/wx/dc.tex b/docs/latex/wx/dc.tex
index e96191b915..0c7b36cc80 100644
--- a/docs/latex/wx/dc.tex
+++ b/docs/latex/wx/dc.tex
@@ -32,6 +32,10 @@ the color's alpha values when stroking or filling.
 
 <wx/dc.h>
 
+\wxheading{Library}
+
+\helpref{wxCore}{librarieslist}
+
 \wxheading{See also}
 
 \helpref{Overview}{dcoverview}
@@ -108,7 +112,7 @@ See \helpref{wxMemoryDC}{wxmemorydc} for typical usage.
 
 \wxheading{See also}
 
-\helpref{wxMemoryDC}{wxmemorydc}, \helpref{wxBitmap}{wxbitmap}, \helpref{wxMask}{wxmask}
+\helpref{wxDC::StretchBlit}{wxdcstretchblit}, \helpref{wxMemoryDC}{wxmemorydc}, \helpref{wxBitmap}{wxbitmap}, \helpref{wxMask}{wxmask}
 
 \begin{comment}
 
@@ -199,7 +203,7 @@ See also \helpref{wxDC::SetClippingRegion}{wxdcsetclippingregion}.
 
 \membersection{wxDC::DeviceToLogicalX}\label{wxdcdevicetologicalx}
 
-\func{wxCoord}{DeviceToLogicalX}{\param{wxCoord}{ x}}
+\func{virtual wxCoord}{DeviceToLogicalX}{\param{wxCoord}{ x}}
 
 Convert device X coordinate to logical coordinate, using the current
 mapping mode.
@@ -207,7 +211,7 @@ mapping mode.
 
 \membersection{wxDC::DeviceToLogicalXRel}\label{wxdcdevicetologicalxrel}
 
-\func{wxCoord}{DeviceToLogicalXRel}{\param{wxCoord}{ x}}
+\func{virtual wxCoord}{DeviceToLogicalXRel}{\param{wxCoord}{ x}}
 
 Convert device X coordinate to relative logical coordinate, using the current
 mapping mode but ignoring the x axis orientation.
@@ -216,7 +220,7 @@ Use this function for converting a width, for example.
 
 \membersection{wxDC::DeviceToLogicalY}\label{wxdcdevicetologicaly}
 
-\func{wxCoord}{DeviceToLogicalY}{\param{wxCoord}{ y}}
+\func{virtual wxCoord}{DeviceToLogicalY}{\param{wxCoord}{ y}}
 
 Converts device Y coordinate to logical coordinate, using the current
 mapping mode.
@@ -224,7 +228,7 @@ mapping mode.
 
 \membersection{wxDC::DeviceToLogicalYRel}\label{wxdcdevicetologicalyrel}
 
-\func{wxCoord}{DeviceToLogicalYRel}{\param{wxCoord}{ y}}
+\func{virtual wxCoord}{DeviceToLogicalYRel}{\param{wxCoord}{ y}}
 
 Convert device Y coordinate to relative logical coordinate, using the current
 mapping mode but ignoring the y axis orientation.
@@ -639,9 +643,9 @@ font is returned.
 \constfunc{wxLayoutDirection}{GetLayoutDirection}{\void}
 
 Gets the current layout direction of the device context. On platforms where RTL layout
-is supported, the return value will either be \texttt{wxLayout_LeftToRight} or 
-\texttt{wxLayout_RightToLeft}. If RTL layout is not supported, the return value will 
-be \texttt{wxLayout_Default}.
+is supported, the return value will either be \texttt{wxLayout\_LeftToRight} or 
+\texttt{wxLayout\_RightToLeft}. If RTL layout is not supported, the return value will 
+be \texttt{wxLayout\_Default}.
 
 \wxheading{See also}
 
@@ -662,6 +666,33 @@ Gets the current logical function (see \helpref{wxDC::SetLogicalFunction}{wxdcse
 Gets the {\it mapping mode} for the device context (see \helpref{wxDC::SetMapMode}{wxdcsetmapmode}).
 
 
+\membersection{wxDC::GetMultiLineTextExtent}\label{wxdcgetmultilinetextextent}
+
+\constfunc{void}{GetMultiLineTextExtent}{\param{const wxString\& }{string}, \param{wxCoord *}{w},\\
+  \param{wxCoord *}{h}, \param{wxCoord *}{heightLine = NULL}, \param{wxFont *}{font = NULL}}
+
+\constfunc{wxSize}{GetMultiLineTextExtent}{\param{const wxString\& }{string}}
+
+Gets the dimensions of the string using the currently selected font.
+\rtfsp{\it string} is the text string to measure, {\it heightLine}, if non NULL,
+is where to store the height of a single line.
+
+The text extent is returned in {\it w} and {\it h} pointers (first form) or as
+a \helpref{wxSize}{wxsize} object (second form).
+
+If the optional parameter {\it font} is specified and valid, then it is used
+for the text extent calculation. Otherwise the currently selected font is.
+
+Note that this function works both with single-line and multi-line strings.
+
+\wxheading{See also}
+
+\helpref{wxFont}{wxfont},\rtfsp
+\helpref{wxDC::SetFont}{wxdcsetfont},\rtfsp
+\helpref{wxDC::GetPartialTextExtents}{wxdcgetpartialtextextents},\rtfsp
+\helpref{wxDC::GetTextExtent}{wxdcgettextextent}
+
+
 \membersection{wxDC::GetPartialTextExtents}\label{wxdcgetpartialtextextents}
 
 \constfunc{bool}{GetPartialTextExtents}{\param{const wxString\&  }{text}, 
@@ -675,6 +706,11 @@ various platforms have a native API function that is faster or more
 accurate than the generic implementation then it should be used
 instead. 
 
+\wxheading{See also}
+
+\helpref{wxDC::GetMultiLineTextExtent}{wxdcgetmultilinetextextent},\rtfsp
+\helpref{wxDC::GetTextExtent}{wxdcgettextextent}
+
 \pythonnote{This method only takes the {\it text} parameter and
   returns a Python list of integers.}
 
@@ -760,20 +796,31 @@ Gets the current text background colour (see \helpref{wxDC::SetTextBackground}{w
 
 \membersection{wxDC::GetTextExtent}\label{wxdcgettextextent}
 
-\func{void}{GetTextExtent}{\param{const wxString\& }{string}, \param{wxCoord *}{w}, \param{wxCoord *}{h},\\
-  \param{wxCoord *}{descent = NULL}, \param{wxCoord *}{externalLeading = NULL}, \param{wxFont *}{font = NULL}}
+\constfunc{void}{GetTextExtent}{\param{const wxString\& }{string}, \param{wxCoord *}{w}, \param{wxCoord *}{h},\\
+  \param{wxCoord *}{descent = NULL}, \param{wxCoord *}{externalLeading = NULL}, \param{const wxFont *}{font = NULL}}
+
+\constfunc{wxSize}{GetTextExtent}{\param{const wxString\& }{string}}
 
 Gets the dimensions of the string using the currently selected font.
-\rtfsp{\it string} is the text string to measure, {\it w} and {\it h} are
-the total width and height respectively, {\it descent} is the
+\rtfsp{\it string} is the text string to measure, {\it descent} is the
 dimension from the baseline of the font to the bottom of the
 descender, and {\it externalLeading} is any extra vertical space added
 to the font by the font designer (usually is zero).
 
+The text extent is returned in {\it w} and {\it h} pointers (first form) or as
+a \helpref{wxSize}{wxsize} object (second form).
+
 If the optional parameter {\it font} is specified and valid, then it is used
 for the text extent calculation. Otherwise the currently selected font is.
 
-See also \helpref{wxFont}{wxfont}, \helpref{wxDC::SetFont}{wxdcsetfont}.
+Note that this function only works with single-line strings.
+
+\wxheading{See also}
+
+\helpref{wxFont}{wxfont},\rtfsp
+\helpref{wxDC::SetFont}{wxdcsetfont},\rtfsp
+\helpref{wxDC::GetPartialTextExtents}{wxdcgetpartialtextextents},\rtfsp
+\helpref{wxDC::GetMultiLineTextExtent}{wxdcgetmultilinetextextent}
 
 \pythonnote{The following methods are implemented in wxPython:\par
 \indented{2cm}{\begin{twocollist}
@@ -837,7 +884,7 @@ use \arg{initialColour} on the left part of the rectangle and
 
 \membersection{wxDC::LogicalToDeviceX}\label{wxdclogicaltodevicex}
 
-\func{wxCoord}{LogicalToDeviceX}{\param{wxCoord}{ x}}
+\func{virtual wxCoord}{LogicalToDeviceX}{\param{wxCoord}{ x}}
 
 Converts logical X coordinate to device coordinate, using the current
 mapping mode.
@@ -845,7 +892,7 @@ mapping mode.
 
 \membersection{wxDC::LogicalToDeviceXRel}\label{wxdclogicaltodevicexrel}
 
-\func{wxCoord}{LogicalToDeviceXRel}{\param{wxCoord}{ x}}
+\func{virtual wxCoord}{LogicalToDeviceXRel}{\param{wxCoord}{ x}}
 
 Converts logical X coordinate to relative device coordinate, using the current
 mapping mode but ignoring the x axis orientation.
@@ -854,7 +901,7 @@ Use this for converting a width, for example.
 
 \membersection{wxDC::LogicalToDeviceY}\label{wxdclogicaltodevicey}
 
-\func{wxCoord}{LogicalToDeviceY}{\param{wxCoord}{ y}}
+\func{virtual wxCoord}{LogicalToDeviceY}{\param{wxCoord}{ y}}
 
 Converts logical Y coordinate to device coordinate, using the current
 mapping mode.
@@ -862,7 +909,7 @@ mapping mode.
 
 \membersection{wxDC::LogicalToDeviceYRel}\label{wxdclogicaltodeviceyrel}
 
-\func{wxCoord}{LogicalToDeviceYRel}{\param{wxCoord}{ y}}
+\func{virtual wxCoord}{LogicalToDeviceYRel}{\param{wxCoord}{ y}}
 
 Converts logical Y coordinate to relative device coordinate, using the current
 mapping mode but ignoring the y axis orientation.
@@ -956,7 +1003,7 @@ whether text will be drawn with a background colour or not.
 Sets the current brush for the DC.
 
 If the argument is wxNullBrush, the current brush is selected out of the device
-context, and the original brush restored, allowing the current brush to
+context (leaving wxDC without any valid brush), allowing the current brush to
 be destroyed safely.
 
 See also \helpref{wxBrush}{wxbrush}.
@@ -1016,7 +1063,7 @@ See also \helpref{wxFont}{wxfont}.
 \func{void}{SetLayoutDirection}{\param{wxLayoutDirection}{ dir}}
 
 Sets the current layout direction for the device context. \arg{dir} may be either
-\texttt{wxLayout_Default}, \texttt{wxLayout_LeftToRight} or \texttt{wxLayout_RightToLeft}.
+\texttt{wxLayout\_Default}, \texttt{wxLayout\_LeftToRight} or \texttt{wxLayout\_RightToLeft}.
 
 \wxheading{See also}
 
@@ -1109,7 +1156,8 @@ See \helpref{wxPalette}{wxpalette} for further details.
 Sets the current pen for the DC.
 
 If the argument is wxNullPen, the current pen is selected out of the device
-context, and the original pen restored.
+context (leaving wxDC without any valid pen), allowing the current brush to
+be destroyed safely.
 
 See also \helpref{wxMemoryDC}{wxmemorydc} for the interpretation of colours
 when drawing into a monochrome bitmap.
@@ -1153,3 +1201,85 @@ Message is a message to show while printing.
 \func{bool}{StartPage}{\void}
 
 Starts a document page (only relevant when outputting to a printer).
+
+
+\membersection{wxDC::StretchBlit}\label{wxdcstretchblit}
+
+\func{bool}{StretchBlit}{\param{wxCoord}{ xdest}, \param{wxCoord}{ ydest}, \param{wxCoord}{ dstWidth}, \param{wxCoord}{ dstHeight},
+  \param{wxDC* }{source}, \param{wxCoord}{ xsrc}, \param{wxCoord}{ ysrc}, \param{wxCoord}{ srcWidth}, \param{wxCoord}{ srcHeight}, 
+  \param{int}{ logicalFunc = wxCOPY}, \param{bool }{useMask = false}, \param{wxCoord}{ xsrcMask = -1}, \param{wxCoord}{ ysrcMask = -1}}
+
+Copy from a source DC to this DC, specifying the destination
+coordinates, destination size, source DC, source coordinates,
+size of source area to copy, logical function, whether to use a bitmap mask, 
+and mask source position.
+
+\wxheading{Parameters}
+
+\docparam{xdest}{Destination device context x position.}
+
+\docparam{ydest}{Destination device context y position.}
+
+\docparam{dstWidth}{Width of destination area.}
+
+\docparam{dstHeight}{Height of destination area.}
+
+\docparam{source}{Source device context.}
+
+\docparam{xsrc}{Source device context x position.}
+
+\docparam{ysrc}{Source device context y position.}
+
+\docparam{srcWidth}{Width of source area to be copied.}
+
+\docparam{srcHeight}{Height of source area to be copied.}
+
+\docparam{logicalFunc}{Logical function to use: see \helpref{wxDC::SetLogicalFunction}{wxdcsetlogicalfunction}.}
+
+\docparam{useMask}{If true, Blit does a transparent blit using the mask that is associated with the bitmap
+selected into the source device context. The Windows implementation does the following if \texttt{MaskBlt} cannot be used:
+
+\begin{enumerate}
+\item Creates a temporary bitmap and copies the destination area into it.
+\item Copies the source area into the temporary bitmap using the specified logical function.
+\item Sets the masked area in the temporary bitmap to BLACK by ANDing the
+mask bitmap with the temp bitmap with the foreground colour set to WHITE
+and the background colour set to BLACK.
+\item Sets the unmasked area in the destination area to BLACK by ANDing the
+mask bitmap with the destination area with the foreground colour set to BLACK
+and the background colour set to WHITE.
+\item ORs the temporary bitmap with the destination area.
+\item Deletes the temporary bitmap.
+\end{enumerate}
+
+This sequence of operations ensures that the source's transparent area need not be black,
+and logical functions are supported.
+
+{\bf Note:} on Windows, blitting with masks can be speeded up considerably by compiling
+wxWidgets with the \texttt{wxUSE\_DC\_CACHE} option enabled. You can also influence whether \texttt{MaskBlt}
+or the explicit mask blitting code above is used, by using \helpref{wxSystemOptions}{wxsystemoptions} and
+setting the {\bf no-maskblt} option to 1.
+
+}
+
+\docparam{xsrcMask}{Source x position on the mask. If both xsrcMask and ysrcMask are -1, xsrc and ysrc
+will be assumed for the mask source position. Currently only implemented on Windows.}
+
+\docparam{ysrcMask}{Source y position on the mask. If both xsrcMask and ysrcMask are -1, xsrc and ysrc
+will be assumed for the mask source position. Currently only implemented on Windows.}
+
+
+\wxheading{Remarks}
+
+There is partial support for Blit in wxPostScriptDC, under X.
+
+wxDC::StretchBlit is only implemented under wxMAC and wxMSW.
+
+See \helpref{wxMemoryDC}{wxmemorydc} for typical usage.
+
+\newsince{2.9.0}
+
+\wxheading{See also}
+
+\helpref{wxDC::Blit}{wxdcblit}, \helpref{wxMemoryDC}{wxmemorydc}, \helpref{wxBitmap}{wxbitmap}, \helpref{wxMask}{wxmask}
+
