X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/68a602fcd2b0856bad6f79b957fa48beb6e10635..f41bc3e3f3fda37fba548440b230288c5eed0953:/include/wx/msw/setup0.h diff --git a/include/wx/msw/setup0.h b/include/wx/msw/setup0.h index 57beb40297..10ad566b6d 100644 --- a/include/wx/msw/setup0.h +++ b/include/wx/msw/setup0.h @@ -36,6 +36,22 @@ // so there is little advantage to setting it to 1. #define WXWIN_COMPATIBILITY 0 +// This setting determines the compatibility with 2.0 API: set it to 1 to +// enable it +// +// Default is 0. +// +// Recommended setting: 0 (please update your code instead!) +#define WXWIN_COMPATIBILITY_2 0 + +// This setting determines the compatibility with 2.0 API: set it to 1 to +// enable it +// +// Default is 1. +// +// Recommended setting: 0 (please update your code instead!) +#define WXWIN_COMPATIBILITY_2_2 1 + // in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap, // but this is very dangerous because you can mistakenly pass an icon instead // of a bitmap to a function taking "const wxBitmap&" - which will *not* work @@ -81,14 +97,12 @@ // and if __NO_VC_CRTDBG__ is not defined. // If 1, enables wxDebugContext, for writing error messages to file, etc. If -// __WXDEBUG__ is not defined, will still use normal memory operators. It's -// recommended to set this to 1, since you may well need to output an error log -// in a production version (or non-debugging beta). +// __WXDEBUG__ is not defined, will still use the normal memory operators. // -// Default is 1. +// Default is 0 // -// Recommended setting: 1 but see comment above -#define wxUSE_DEBUG_CONTEXT 1 +// Recommended setting: 0 +#define wxUSE_DEBUG_CONTEXT 0 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF* // __WXDEBUG__ is also defined. @@ -96,29 +110,31 @@ // WARNING: this code may not work with all architectures, especially if // alignment is an issue. This switch is currently ignored for mingw / cygwin // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_MEMORY_TRACING 1 +// Recommended setting: 1 if you are not using a memory debugging tool, else 0 +#define wxUSE_MEMORY_TRACING 0 // In debug mode, cause new and delete to be redefined globally. -// If this causes problems (e.g. link errors), set this to 0. +// If this causes problems (e.g. link errors which is a common problem +// especially if you use another library which also redefines the global new +// and delete), set this to 0. // This switch is currently ignored for mingw / cygwin // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_GLOBAL_MEMORY_OPERATORS 1 +// Recommended setting: 0 +#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If // this causes problems (e.g. link errors), set this to 0. You may need to set // this to 0 if using templates (at least for VC++). This switch is currently -// ignored for mingw / cygwin +// ignored for mingw / cygwin / CodeWarrior // -// Default is 1 +// Default is 0 // -// Recommended setting: 1 but see comment in the beginning of this section -#define wxUSE_DEBUG_NEW_ALWAYS 1 +// Recommended setting: 0 +#define wxUSE_DEBUG_NEW_ALWAYS 0 // wxHandleFatalExceptions() may be used to catch the program faults at run // time and, instead of terminating the program with a usual GPF message box, @@ -145,15 +161,31 @@ // defined as wchar_t, wxString will use Unicode internally. If you set this // to 1, you must use wxT() macro for all literal strings in the program. // -// Unicode is currently only fully supported under Windows NT/2000 (Windows 9x +// Unicode is currently only fully supported under Windows NT/2000/XP (Windows 9x // doesn't support it and the programs compiled in Unicode mode will not run // under 9x). // // Default is 0 // -// Recommended setting: 0 (unless you only plan to use Windows NT/2000) +// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP) #define wxUSE_UNICODE 0 +// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode +// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. This +// setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see +// http://www.microsoft.com/globaldev/Articles/mslu_announce.asp). Note that you +// will have to modify the makefiles to include unicows.lib import library as the first +// library (if you use MSVC, you can run the makefile with "nmake MSLU=1 UNICODE=1" +// command). +// +// If your compiler doesn't have unicows.lib, you can get a version of it at +// http://libunicows.sourceforge.net +// +// Default is 0 +// +// Recommended setting: 0 +#define wxUSE_UNICODE_MSLU 0 + // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without // compiling the program in Unicode mode. More precisely, it will be possible // to construct wxString from a wide (Unicode) string and convert any wxString @@ -177,6 +209,22 @@ // Recommended setting: 1 (always) #define wxUSE_LOG 1 +// Support for command line parsing using wxCmdLineParser class. +// +// Default is 1 +// +// Recommended setting: 1 (can be set to 0 if you don't use the cmd line) +#define wxUSE_CMDLINE_PARSER 1 + +// Recommended setting: 1 +#define wxUSE_LOGWINDOW 1 + +// Recommended setting: 1 +#define wxUSE_LOGGUI 1 + +// Recommended setting: 1 +#define wxUSE_LOG_DIALOG 1 + // Support for multithreaded applications: if 1, compile in thread classes // (thread.h) and make the library a bit more thread safe. Although thread // support is quite stable by now, you may still consider recompiling the @@ -196,9 +244,6 @@ // Use standard C++ streams if 1. If 0, use wxWin streams implementation. #define wxUSE_STD_IOSTREAM 0 -// Use serialization (requires utils/serialize) -#define wxUSE_SERIAL 0 - // ---------------------------------------------------------------------------- // non GUI features selection // ---------------------------------------------------------------------------- @@ -216,7 +261,34 @@ // Recommended setting: 1 #define wxUSE_LONGLONG 1 -// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which +// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level +// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. +// +// Default is 1 +// +// Recommended setting: 1 (wxFile is highly recommended as it is required by +// i18n code, wxFileConfig and others) +#define wxUSE_FILE 1 +#define wxUSE_FFILE 1 + +// Use wxFSVolume class providing access to the configured/active mount points +// +// Default is 1 +// +// Recommended setting: 1 (but may be safely disabled if you don't use it) +#define wxUSE_FSVOLUME 1 + +// use wxTextBuffer class: required by wxTextFile +#define wxUSE_TEXTBUFFER 1 + +// use wxTextFile class: requires wxFile and wxTextBuffer, required by +// wxFileConfig +#define wxUSE_TEXTFILE 1 + +// i18n support: _() macro, wxLocale class. Requires wxTextFile. +#define wxUSE_INTL 1 + +// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which // allow to manipulate dates, times and time intervals. wxDateTime replaces the // old wxTime and wxDate classes which are still provided for backwards // compatibility (and implemented in terms of wxDateTime). @@ -228,8 +300,33 @@ // // Requires: wxUSE_LONGLONG // +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_DATETIME 1 + +// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not +// the same as wxDateTime!). These classes are obsolete and shouldn't be used +// in new code +// +// Default is 0 +// +// Recommended setting: 0 unless you have legacy code which uses these classes +#define wxUSE_TIMEDATE 0 + +// Set wxUSE_TIMER to 1 to compile wxTimer class +// +// Default is 1 +// // Recommended setting: 1 -#define wxUSE_TIMEDATE 1 +#define wxUSE_TIMER 1 + +// Use wxStopWatch clas. +// +// Default is 1 +// +// Recommended setting: 1 (needed by wxSocket) +#define wxUSE_STOPWATCH 1 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes // which allow the application to store its settings in the persistent @@ -239,7 +336,7 @@ // See also wxUSE_CONFIG_NATIVE below. // // Recommended setting: 1 -#define wxUSE_CONFIG 1 +#define wxUSE_CONFIG 1 // If wxUSE_CONFIG is 1, you may choose to use either the native config // classes under Windows (using .INI files under Win16 and the registry under @@ -256,14 +353,14 @@ // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows // to connect/disconnect from the network and be notified whenever the dial-up -// network connection is established/terminated. Requires wxUSE_DYNLIB_CLASS. +// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER. // // Default is 1. // // Recommended setting: 1 #define wxUSE_DIALUP_MANAGER 1 -// Compile in wxLibrary class for run-time DLL loading and function calling. +// Compile in classes for run-time DLL loading and function calling. // Required by wxUSE_DIALUP_MANAGER. // // This setting is for Win32 only @@ -271,7 +368,10 @@ // Default is 1. // // Recommended setting: 1 -#define wxUSE_DYNLIB_CLASS 1 +#define wxUSE_DYNLIB_CLASS 1 + +// experimental, don't use for now +#define wxUSE_DYNAMIC_LOADER 1 // Set to 1 to use socket classes #define wxUSE_SOCKETS 1 @@ -301,27 +401,125 @@ // Recommended setting: 1 unless you don't like the license terms (unlikely) #define wxUSE_APPLE_IEEE 1 -// Use wxFile class. +// Joystick support class +#define wxUSE_JOYSTICK 1 + +// wxFontMapper class +#define wxUSE_FONTMAP 1 + +// wxMimeTypesManager class +#define wxUSE_MIMETYPE 1 + +// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP +// or wxURL you need to set this to 1. // // Default is 1. // -// Recommended setting: 1 (highly recommended, required i18n code, wxConfig...) -#define wxUSE_FILE 1 +// Recommended setting: 1 +#define wxUSE_PROTOCOL 1 -// use wxTextFile class: requires wxFile, required by wxFileConfig -#define wxUSE_TEXTFILE 1 +// The settings for the individual URL schemes +#define wxUSE_PROTOCOL_FILE 1 +#define wxUSE_PROTOCOL_FTP 1 +#define wxUSE_PROTOCOL_HTTP 1 -// i18n support: _() macro, wxLocale class. Requires wxTextFile. -#define wxUSE_INTL 1 +// Define this to use wxURL class. +#define wxUSE_URL 1 -// Joystick support class -#define wxUSE_JOYSTICK 1 +// Support for regular expression matching via wxRegEx class: enable this to +// use POSIX regular expressions in your code. You need to compile regex +// library from src/regex to use it under Windows. +// +// Default is 0 +// +// Recommended setting: 1 if your compiler supports it, if it doesn't please +// contribute us a makefile for src/regex for it +#define wxUSE_REGEX 1 +// wxSystemOptions class +#define wxUSE_SYSTEM_OPTIONS 1 + +// wxWave class +#define wxUSE_WAVE 1 // ---------------------------------------------------------------------------- -// Optional controls +// Individual GUI controls // ---------------------------------------------------------------------------- +// You must set wxUSE_CONTROLS to 1 if you are using any controls at all +// (without it, wxControl class is not compiled) +// +// Default is 1 +// +// Recommended setting: 1 (don't change except for very special programs) +#define wxUSE_CONTROLS 1 + +// wxPopupWindow class is a top level transient window. It is currently used +// to implement wxTipWindow +// +// Default is 1 +// +// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW) +#define wxUSE_POPUPWIN 1 + +// wxTipWindow allows to implement the custom tooltips, it is used by the +// context help classes. Requires wxUSE_POPUPWIN. +// +// Default is 1 +// +// Recommended setting: 1 (may be set to 0) +#define wxUSE_TIPWINDOW 1 + +// Each of the settings below corresponds to one wxWindows control. They are +// all switched on by default but may be disabled if you are sure that your +// program (including any standard dialogs it can show!) doesn't need them and +// if you desperately want to save some space. If you use any of these you must +// set wxUSE_CONTROLS as well. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_BUTTON 1 // wxButton +#define wxUSE_BMPBUTTON 1 // wxBitmapButton +#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl +#define wxUSE_CHECKBOX 1 // wxCheckBox +#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) +#define wxUSE_CHOICE 1 // wxChoice +#define wxUSE_COMBOBOX 1 // wxComboBox +#define wxUSE_GAUGE 1 // wxGauge +#define wxUSE_LISTBOX 1 // wxListBox +#define wxUSE_LISTCTRL 1 // wxListCtrl +#define wxUSE_RADIOBOX 1 // wxRadioBox +#define wxUSE_RADIOBTN 1 // wxRadioButton +#define wxUSE_SCROLLBAR 1 // wxScrollBar +#define wxUSE_SLIDER 1 // wxSlider +#define wxUSE_SPINBTN 1 // wxSpinButton +#define wxUSE_SPINCTRL 1 // wxSpinCtrl +#define wxUSE_STATBOX 1 // wxStaticBox +#define wxUSE_STATLINE 1 // wxStaticLine +#define wxUSE_STATTEXT 1 // wxStaticText +#define wxUSE_STATBMP 1 // wxStaticBitmap +#define wxUSE_TEXTCTRL 1 // wxTextCtrl +#define wxUSE_TOGGLEBTN 1 // requires wxButton +#define wxUSE_TREECTRL 1 // wxTreeCtrl + +// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR +// below either wxStatusBar95 or a generic wxStatusBar will be used. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_STATUSBAR 1 + +// Two status bar implementations are available under Win32: the generic one +// or the wrapper around native control. For native look and feel the native +// version should be used. +// +// Default is 1. +// +// Recommended setting: 1 (there is no advantage in using the generic one) +#define wxUSE_NATIVE_STATUSBAR 1 + // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar // classes at all. Otherwise, use the native toolbar class unless // wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which @@ -336,6 +534,9 @@ #define wxUSE_TOOLBAR_NATIVE 1 #define wxUSE_TOOLBAR_SIMPLE 1 +// this setting is obsolete, value is ignored +#define wxUSE_BUTTONBAR 1 + // wxNotebook is a control with several "tabs" located on one of its sides. It // may be used ot logically organise the data presented to the user instead of // putting everything in one huge dialog. It replaces wxTabControl and related @@ -346,43 +547,13 @@ // Recommended setting: 1 #define wxUSE_NOTEBOOK 1 -// The corresponding controls will be compiled in if wxUSE_ is set to -// 1 and not compiled into the library otherwise. -// -// Default is 1 for everything. -// -// Recommended setting: 1 (library might fail to compile for some combinations -// of disabled controls) -#define wxUSE_CARET 1 -#define wxUSE_CHECKBOX 1 -#define wxUSE_CHECKLISTBOX 1 // requires wxUSE_OWNER_DRAWN -#define wxUSE_CHOICE 1 -#define wxUSE_COMBOBOX 1 -#define wxUSE_GAUGE 1 -#define wxUSE_LISTBOX 1 -#define wxUSE_RADIOBOX 1 -#define wxUSE_RADIOBTN 1 -#define wxUSE_SASH 1 // wxSashWindow -#define wxUSE_SCROLLBAR 1 -#define wxUSE_SLIDER 1 -#define wxUSE_SPINBTN 1 -#define wxUSE_SPINCTRL 1 -#define wxUSE_STATLINE 1 -#define wxUSE_STATUSBAR 1 -#define wxUSE_TOGGLEBTN 1 // requires wxButton -#define wxUSE_TOOLTIPS 1 // wxToolTip and wxWindow::SetToolTip() - -// Two status bar implementations are available under Win32: the generic one -// or the wrapper around native control. For native look and feel the native -// version should be used. +// wxTabDialog is a generic version of wxNotebook but it is incompatible with +// the new class. It shouldn't be used in new code. // -// Default is 1. +// Default is 0. // -// Recommended setting: 1 -#define wxUSE_NATIVE_STATUSBAR 1 - -// this setting is obsolete, value is ignored -#define wxUSE_BUTTONBAR 1 +// Recommended setting: 0 (use wxNotebook) +#define wxUSE_TAB_DIALOG 0 // wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and // the new, much imporved and enhanced version. The new version is backwards @@ -399,12 +570,70 @@ #define wxUSE_GRID 1 #define wxUSE_NEW_GRID 1 -// wxValidator class and related methods -#define wxUSE_VALIDATORS 1 +// wxProperty[Value/Form/List] classes, used by Dialog Editor +#define wxUSE_PROPSHEET 0 + +// ---------------------------------------------------------------------------- +// Miscellaneous GUI stuff +// ---------------------------------------------------------------------------- // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) #define wxUSE_ACCEL 1 +// Use wxCaret: a class implementing a "cursor" in a text control (called caret +// under Windows). +// +// Default is 1. +// +// Recommended setting: 1 (can be safely set to 0, not used by the library) +#define wxUSE_CARET 1 + +// Miscellaneous geometry code: needed for Canvas library +#define wxUSE_GEOMETRY 1 + +// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and +// wxListCtrl. +// +// Default is 1. +// +// Recommended setting: 1 (set it to 0 if you don't use any of the controls +// enumerated above, then this class is mostly useless too) +#define wxUSE_IMAGLIST 1 + +// Use wxMenu, wxMenuBar, wxMenuItem. +// +// Default is 1. +// +// Recommended setting: 1 (can't be disabled under MSW) +#define wxUSE_MENUS 1 + +// Use wxSashWindow class. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_SASH 1 + +// Use wxSplitterWindow class. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_SPLITTER 1 + +// Use wxToolTip and wxWindow::Set/GetToolTip() methods. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_TOOLTIPS 1 + +// wxValidator class and related methods +#define wxUSE_VALIDATORS 1 + +// wxDC cacheing implementation +#define wxUSE_DC_CACHEING 1 + // ---------------------------------------------------------------------------- // common dialogs // ---------------------------------------------------------------------------- @@ -427,22 +656,75 @@ // Recommended setting: 1 (unless it really doesn't work) #define wxUSE_COMMON_DIALOGS 1 -// text entry dialog and wxGetTextFromUser function -#define wxUSE_TEXTDLG 1 - -// progress dialog class for lengthy operations -#define wxUSE_PROGRESSDLG 1 - // wxBusyInfo displays window with message when app is busy. Works in same way // as wxBusyCursor #define wxUSE_BUSYINFO 1 +// Use single/multiple choice dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_CHOICEDLG 1 + +// Use colour picker dialog +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_COLOURDLG 1 + // wxDirDlg class for getting a directory name from user #define wxUSE_DIRDLG 1 +// TODO: setting to choose the generic or native one + +// Use file open/save dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (used in many places in the library itself) +#define wxUSE_FILEDLG 1 + +// Use find/replace dialogs. +// +// Default is 1 +// +// Recommended setting: 1 (but may be safely set to 0) +#define wxUSE_FINDREPLDLG 1 + +// Use font picker dialog +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_FONTDLG 1 + +// Use wxMessageDialog and wxMessageBox. +// +// Default is 1 +// +// Recommended setting: 1 (used in the library itself) +#define wxUSE_MSGDLG 1 + +// progress dialog class for lengthy operations +#define wxUSE_PROGRESSDLG 1 + // support for startup tips (wxShowTip &c) #define wxUSE_STARTUP_TIPS 1 +// text entry dialog and wxGetTextFromUser function +#define wxUSE_TEXTDLG 1 + +// number entry dialog +#define wxUSE_NUMBERDLG 1 + +// splash screen class +#define wxUSE_SPLASH 1 + +// wizards +#define wxUSE_WIZARDDLG 1 + // ---------------------------------------------------------------------------- // Metafiles support // ---------------------------------------------------------------------------- @@ -492,6 +774,34 @@ // wxTreeLayout class #define wxUSE_TREELAYOUT 1 +// ---------------------------------------------------------------------------- +// Data transfer +// ---------------------------------------------------------------------------- + +// Use wxClipboard class for clipboard copy/paste. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_CLIPBOARD 1 + +// Use wxDataObject and related classes. Needed for clipboard and OLE drag and +// drop +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_DATAOBJ 1 + +// Use wxDropTarget and wxDropSource classes for drag and drop (this is +// different from "built in" drag and drop in wxTreeCtrl which is always +// available). Requires wxUSE_DATAOBJ. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_DRAG_AND_DROP 1 + // ---------------------------------------------------------------------------- // miscellaneous settings // ---------------------------------------------------------------------------- @@ -505,25 +815,31 @@ // space) #define wxUSE_SNGLINST_CHECKER 1 +#define wxUSE_DRAGIMAGE 1 + #define wxUSE_IPC 1 // 0 for no interprocess comms #define wxUSE_HELP 1 // 0 for no help facility -#define wxUSE_MS_HTML_HELP 0 +#define wxUSE_MS_HTML_HELP 1 // 0 for no MS HTML Help + +// Use wxHTML-based help controller? +#define wxUSE_WXHTML_HELP 1 + #define wxUSE_RESOURCES 1 // 0 for no wxGetResource/wxWriteResource #define wxUSE_CONSTRAINTS 1 // 0 for no window layout constraint system -#define wxUSE_CLIPBOARD 1 - // 0 for no clipboard functions - #define wxUSE_SPLINES 1 // 0 for no splines -#define wxUSE_DRAG_AND_DROP 1 - // 0 for no drag and drop +#define wxUSE_XPM_IN_MSW 1 + // 0 for no XPM support in wxBitmap. + // Default is 1, as XPM is now fully + // supported this makes easier the issue + // of portable icons and bitmaps. #define wxUSE_IMAGE_LOADING_IN_MSW 1 // Use dynamic DIB loading/saving code in utils/dib under MSW. @@ -626,9 +942,18 @@ // Set to 1 for PCX format support #define wxUSE_PCX 1 +// Set to 1 for IFF format support (Amiga format) +#define wxUSE_IFF 0 + // Set to 1 for XPM format support #define wxUSE_XPM 1 +// Set to 1 for MS Icons and Cursors format support +#define wxUSE_ICO_CUR 1 + +// Set to 1 to compile in wxPalette class +#define wxUSE_PALETTE 1 + // ---------------------------------------------------------------------------- // Windows-only settings // ---------------------------------------------------------------------------- @@ -732,6 +1057,12 @@ #endif #endif +// wxUSE_DEBUG_NEW_ALWAYS doesn't work with CodeWarrior +#if defined(__MWERKS__) + #undef wxUSE_DEBUG_NEW_ALWAYS + #define wxUSE_DEBUG_NEW_ALWAYS 0 +#endif + #if defined(__GNUWIN32__) // These don't work as expected for mingw32 and cygwin32 #undef wxUSE_MEMORY_TRACING @@ -762,12 +1093,6 @@ #define wxUSE_DEBUG_NEW_ALWAYS 0 #endif // wxUSE_MFC -// ODBC classes aren't Unicode-compatible yet -#if wxUSE_UNICODE -#undef wxUSE_ODBC -#define wxUSE_ODBC 0 -#endif - #if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !wxUSE_NORLANDER_HEADERS) // Can't use OLE drag and drop in Windows 3.1 because we don't know how // to implement UUIDs @@ -895,40 +1220,5 @@ #endif // Win16 -// ---------------------------------------------------------------------------- -// undef the things which don't make sense for wxBase build -// ---------------------------------------------------------------------------- - -#if !wxUSE_GUI - -#undef wxUSE_HTML -#define wxUSE_HTML 0 - -#endif // !wxUSE_GUI - -// ---------------------------------------------------------------------------- -// check the settings consistency: do it here to abort compilation immediately -// and not almost in the very end when the relevant file fails to compile and -// you need to modify setup.h and rebuild everything -// ---------------------------------------------------------------------------- - -#if wxUSE_TIMEDATE && !wxUSE_LONGLONG - #error wxDateTime requires wxLongLong -#endif - -#if wxUSE_TEXTFILE && !wxUSE_FILE - #error You cannot compile wxTextFile without wxFile -#endif - -#if wxUSE_FILESYSTEM && !wxUSE_STREAMS - #error You cannot compile virtual file systems without wxUSE_STREAMS -#endif - -#if wxUSE_HTML && !wxUSE_FILESYSTEM - #error You cannot compile wxHTML without virtual file systems -#endif - -// add more tests here... - #endif // _WX_SETUP_H_