X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/671683c445e4ef668a5a4ed9511f31e6565bdfe9..f437e1552af47dc1befdebbad4567a8b5d51a853:/include/wx/setup_inc.h diff --git a/include/wx/setup_inc.h b/include/wx/setup_inc.h index d7fdc23954..8b917569bc 100644 --- a/include/wx/setup_inc.h +++ b/include/wx/setup_inc.h @@ -56,6 +56,50 @@ // debugging settings // ---------------------------------------------------------------------------- +// wxDEBUG_LEVEL will be defined as 1 in wx/debug.h so normally there is no +// need to define it here. You may do it for two reasons: either completely +// disable/compile out the asserts in release version (then do it inside #ifdef +// NDEBUG) or, on the contrary, enable more asserts, including the usually +// disabled ones, in the debug build (then do it inside #ifndef NDEBUG) +// +// #ifdef NDEBUG +// #define wxDEBUG_LEVEL 0 +// #else +// #define wxDEBUG_LEVEL 2 +// #endif + +// wxHandleFatalExceptions() may be used to catch the program faults at run +// time and, instead of terminating the program with a usual GPF message box, +// call the user-defined wxApp::OnFatalException() function. If you set +// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work. +// +// This setting is for Win32 only and can only be enabled if your compiler +// supports Win32 structured exception handling (currently only VC++ does) +// +// Default is 1 +// +// Recommended setting: 1 if your compiler supports it. +#define wxUSE_ON_FATAL_EXCEPTION 1 + +// Set this to 1 to be able to generate a human-readable (unlike +// machine-readable minidump created by wxCrashReport::Generate()) stack back +// trace when your program crashes using wxStackWalker +// +// Default is 1 if supported by the compiler. +// +// Recommended setting: 1, set to 0 if your programs never crash +#define wxUSE_STACKWALKER 1 + +// Set this to 1 to compile in wxDebugReport class which allows you to create +// and optionally upload to your web site a debug report consisting of back +// trace of the crash (if wxUSE_STACKWALKER == 1) and other information. +// +// Default is 1 if supported by the compiler. +// +// Recommended setting: 1, it is compiled into a separate library so there +// is no overhead if you don't use it +#define wxUSE_DEBUGREPORT 1 + // Generic comment about debugging settings: they are very useful if you don't // use any other memory leak detection tools such as Purify/BoundsChecker, but // are probably redundant otherwise. Also, Visual C++ CRT has the same features @@ -63,10 +107,13 @@ // may prefer to use it instead of built in memory debugging code because it is // faster and more fool proof. // -// Using VC++ CRT memory debugging is enabled by default in debug mode -// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0) +// Using VC++ CRT memory debugging is enabled by default in debug build (_DEBUG +// is defined) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0) // and if __NO_VC_CRTDBG__ is not defined. +// The rest of the options in this section are obsolete and not supported, +// enable them at your own risk. + // If 1, enables wxDebugContext, for writing error messages to file, etc. If // __WXDEBUG__ is not defined, will still use the normal memory operators. // @@ -107,37 +154,6 @@ // Recommended setting: 0 #define wxUSE_DEBUG_NEW_ALWAYS 0 -// wxHandleFatalExceptions() may be used to catch the program faults at run -// time and, instead of terminating the program with a usual GPF message box, -// call the user-defined wxApp::OnFatalException() function. If you set -// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work. -// -// This setting is for Win32 only and can only be enabled if your compiler -// supports Win32 structured exception handling (currently only VC++ does) -// -// Default is 1 -// -// Recommended setting: 1 if your compiler supports it. -#define wxUSE_ON_FATAL_EXCEPTION 1 - -// Set this to 1 to be able to generate a human-readable (unlike -// machine-readable minidump created by wxCrashReport::Generate()) stack back -// trace when your program crashes using wxStackWalker -// -// Default is 1 if supported by the compiler. -// -// Recommended setting: 1, set to 0 if your programs never crash -#define wxUSE_STACKWALKER 1 - -// Set this to 1 to compile in wxDebugReport class which allows you to create -// and optionally upload to your web site a debug report consisting of back -// trace of the crash (if wxUSE_STACKWALKER == 1) and other information. -// -// Default is 1 if supported by the compiler. -// -// Recommended setting: 1, it is compiled into a separate library so there -// is no overhead if you don't use it -#define wxUSE_DEBUGREPORT 1 // ---------------------------------------------------------------------------- // Unicode support @@ -410,6 +426,13 @@ // Recommended setting: 1 (needed by wxSocket) #define wxUSE_STOPWATCH 1 +// Set wxUSE_FSWATCHER to 1 if you want to enable wxFileSystemWatcher +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_FSWATCHER 1 + // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes // which allow the application to store its settings in the persistent // storage. Setting this to 1 will also enable on-demand creation of the @@ -550,6 +573,14 @@ // possible in which case setting this to 0 can gain up to 100KB. #define wxUSE_VARIANT 1 +// Support for wxAny class, the successor for wxVariant. +// +// Default is 1. +// +// Recommended setting: 1 unless you want to reduce the library size by a small amount, +// or your compiler cannot for some reason cope with complexity of templates used. +#define wxUSE_ANY 1 + // Support for regular expression matching via wxRegEx class: enable this to // use POSIX regular expressions in your code. You need to compile regex // library from src/regex to use it under Windows. @@ -595,6 +626,13 @@ // Recommended setting: 1 #define wxUSE_AUI 1 +// Use wxWidget's Ribbon classes for interfaces +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_RIBBON 1 + // Use wxPropertyGrid. // // Default is 1 @@ -613,16 +651,52 @@ // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced // 2D drawing API. (Still somewhat experimental) // -// Please note that on Windows you will need to link with gdiplus.lib (use -// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your -// application if you want it to be runnable on pre-XP systems. +// Please note that on Windows gdiplus.dll is loaded dynamically which means +// that nothing special needs to be done as long as you don't use +// wxGraphicsContext at all or only use it on XP and later systems but you +// still do need to distribute it yourself for an application using +// wxGraphicsContext to be runnable on pre-XP systems. +// +// Default is 1 except if you're using a non-Microsoft compiler under Windows +// as only MSVC7+ is known to ship with gdiplus.h. For other compilers (e.g. +// mingw32) you may need to install the headers (and just the headers) +// yourself. If you do, change the setting below manually. +// +// Recommended setting: 1 if supported by the compilation environment + +// notice that we can't use wxCHECK_VISUALC_VERSION() here as this file is +// included from wx/platform.h before wxCHECK_VISUALC_VERSION() is defined +#ifdef _MSC_VER +# if _MSC_VER >= 1310 + // MSVC7.1+ comes with new enough Platform SDK, enable + // wxGraphicsContext support for it +# define wxUSE_GRAPHICS_CONTEXT 1 +# else + // MSVC 6 didn't include GDI+ headers so disable by default, enable it + // here if you use MSVC 6 with a newer SDK +# define wxUSE_GRAPHICS_CONTEXT 0 +# endif +#else + // Disable support for other Windows compilers, enable it if your compiler + // comes with new enough SDK or you installed the headers manually. + // + // Notice that this will be set by configure under non-Windows platforms + // anyhow so the value there is not important. +# define wxUSE_GRAPHICS_CONTEXT 0 +#endif + +// Enable wxGraphicsContext implementation using Cairo library. +// +// This is not needed under Windows and detected automatically by configure +// under other systems, however you may set this to 1 manually if you installed +// Cairo under Windows yourself and prefer to use it instead the native GDI+ +// implementation. // // Default is 0 // -// Recommended setting: 1 -#ifndef wxUSE_GRAPHICS_CONTEXT -#define wxUSE_GRAPHICS_CONTEXT 0 -#endif +// Recommended setting: 0 +#define wxUSE_CAIRO 0 + // ---------------------------------------------------------------------------- // Individual GUI controls @@ -671,6 +745,7 @@ #define wxUSE_COLLPANE 1 // wxCollapsiblePane #define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl #define wxUSE_COMBOBOX 1 // wxComboBox +#define wxUSE_COMMANDLINKBUTTON 1 // wxCommandLinkButton #define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl #define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl @@ -685,6 +760,7 @@ #define wxUSE_LISTCTRL 1 // wxListCtrl #define wxUSE_RADIOBOX 1 // wxRadioBox #define wxUSE_RADIOBTN 1 // wxRadioButton +#define wxUSE_RICHMSGDLG 1 // wxRichMessageDialog #define wxUSE_SCROLLBAR 1 // wxScrollBar #define wxUSE_SEARCHCTRL 1 // wxSearchCtrl #define wxUSE_SLIDER 1 // wxSlider @@ -832,6 +908,29 @@ // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) #define wxUSE_ACCEL 1 +// Use the standard art provider. The icons returned by this provider are +// embedded into the library as XPMs so disabling it reduces the library size +// somewhat but this should only be done if you use your own custom art +// provider returning the icons or never use any icons not provided by the +// native art provider (which might not be implemented at all for some +// platforms) or by the Tango icons provider (if it's not itself disabled +// below). +// +// Default is 1. +// +// Recommended setting: 1 unless you use your own custom art provider. +#define wxUSE_ARTPROVIDER_STD 1 + +// Use art provider providing Tango icons: this art provider has higher quality +// icons than the default ones using smaller size XPM icons without +// transparency but the embedded PNG icons add to the library size. +// +// Default is 1 under non-GTK ports. Under wxGTK the native art provider using +// the GTK+ stock icons replaces it so it is normally not necessary. +// +// Recommended setting: 1 but can be turned off to reduce the library size. +#define wxUSE_ARTPROVIDER_TANGO 1 + // Hotkey support (currently Windows only) #define wxUSE_HOTKEY 1 @@ -864,6 +963,14 @@ // enumerated above, then this class is mostly useless too) #define wxUSE_IMAGLIST 1 +// Use wxInfoBar class. +// +// Default is 1. +// +// Recommended setting: 1 (but can be disabled without problems as nothing +// depends on it) +#define wxUSE_INFOBAR 1 + // Use wxMenu, wxMenuBar, wxMenuItem. // // Default is 1. @@ -1010,6 +1117,13 @@ // use this function #define wxUSE_ABOUTDLG 1 +// wxFileHistory class +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_FILE_HISTORY 1 + // ---------------------------------------------------------------------------- // Metafiles support // ---------------------------------------------------------------------------- @@ -1163,6 +1277,9 @@ #define wxUSE_MOUSEWHEEL 1 // Include mouse wheel support +// Compile wxUIActionSimulator class? +#define wxUSE_UIACTIONSIMULATOR 1 + // ---------------------------------------------------------------------------- // wxDC classes for various output formats // ----------------------------------------------------------------------------