X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/65ec6247df6af7b6489257b1ac04ca2242dc14ec..107defe36a68091303be9a11c8abb83432acee8c:/src/stc/scintilla/include/Scintilla.iface diff --git a/src/stc/scintilla/include/Scintilla.iface b/src/stc/scintilla/include/Scintilla.iface index 90360076fa..a6626d2335 100644 --- a/src/stc/scintilla/include/Scintilla.iface +++ b/src/stc/scintilla/include/Scintilla.iface @@ -2,6 +2,9 @@ ## This file defines the interface to Scintilla +## Copyright 2000-2003 by Neil Hodgson +## The License.txt file describes the conditions under which this software may be distributed. + ## A line starting with ## is a pure comment and should be stripped by readers. ## A line starting with #! is for future shbang use ## A line starting with # followed by a space is a documentation comment and refers @@ -14,17 +17,34 @@ ## set -> a property set function ## val -> definition of a constant ## evt -> an event +## enu -> associate an enumeration with a set of vals with a prefix +## lex -> associate a lexer with the lexical classes it produces +## ## All other feature names should be ignored. They may be defined in the future. ## A property may have a set function, a get function or both. Each will have ## "Get" or "Set" in their names and the corresponding name will have the obvious switch. ## A property may be subscripted, in which case the first parameter is the subscript. ## fun, get, and set features have a strict syntax: ## [=,) -## param is [=] +## where stands for white space. +## param may be empty (null value) or is [=] ## Additional white space is allowed between elements. ## The syntax for evt is [=[,]*]) ## Feature names that contain an underscore are defined by Windows, so in these ## cases, using the Windows definition is preferred where available. +## The feature numbers are stable so features will not be renumbered. +## Features may be removed but they will go through a period of deprecation +## before removal which is signalled by moving them into the Deprecated category. +## +## enu has the syntax enu=[]* where all the val +## features in this file starting with a given are considered part of the +## enumeration. +## +## lex has the syntax lex=[]* +## where name is a reasonably capitalised (Python, XML) identifier or UI name, +## lexerVal is the val used to specify the lexer, and the list of prefixes is similar +## to enu. The name may not be the same as that used within the lexer so the lexerVal +## should be used to tie these entities together. ## Types: ## void @@ -33,64 +53,73 @@ ## position -> integer position in a document ## colour -> colour integer containing red, green and blue bytes. ## string -> pointer to const character -## stringresult -> pointer to character +## stringresult -> pointer to character, NULL-> return size of result ## cells -> pointer to array of cells, each cell containing a style byte and character byte -## charrange -> range of a min and a max position -## charrangeresult -> like charrange, but output param -## textrange -> charrange + output string +## textrange -> range of a min and a max position with an output string ## findtext -> searchrange, text -> foundposition -## findtextex -> searchrange ## keymod -> integer containing key in low half and modifiers in high half -## countedstring ## formatrange +## Types no longer used: +## findtextex -> searchrange +## charrange -> range of a min and a max position +## charrangeresult -> like charrange, but output param +## countedstring ## point -> x,y ## pointresult -> like point, but output param ## rectangle -> left,top,right,bottom ## Client code should ignore definitions containing types it does not understand, except ## for possibly #defining the constants +## Line numbers and positions start at 0. +## String arguments may contain NUL ('\0') characters where the calls provide a length +## argument and retrieve NUL characters. All retrieved strings except for those retrieved +## by GetLine also have a NUL appended but client code should calculate the size that +## will be returned rather than relying upon the NUL whenever possible. Allow for the +## extra NUL character when allocating buffers. The size to allocate for a stringresult +## can be determined by calling with a NULL (0) pointer. + cat Basics ################################################ ## For Scintilla.h val INVALID_POSITION=-1 -# Define start of Scintilla messages to be greater than all edit (EM_*) messages +# Define start of Scintilla messages to be greater than all Windows edit (EM_*) messages # as many EM_ messages can be used although that use is deprecated. val SCI_START=2000 val SCI_OPTIONAL_START=3000 val SCI_LEXER_START=4000 -# Add text to the document +# Add text to the document at current position. fun void AddText=2001(int length, string text) -# Add array of cells to document +# Add array of cells to document. fun void AddStyledText=2002(int length, cells c) -# Insert string at a position +# Insert string at a position. fun void InsertText=2003(position pos, string text) -# Delete all text in the document +# Delete all text in the document. fun void ClearAll=2004(,) -# Set all style bytes to 0, remove all folding information +# Set all style bytes to 0, remove all folding information. fun void ClearDocumentStyle=2005(,) -# The number of characters in the document +# Returns the number of characters in the document. get int GetLength=2006(,) -# Returns the character byte at the position +# Returns the character byte at the position. get int GetCharAt=2007(position pos,) -# Returns the position of the caret +# Returns the position of the caret. get position GetCurrentPos=2008(,) -# Returns the position of the opposite end of the selection to the caret +# Returns the position of the opposite end of the selection to the caret. get position GetAnchor=2009(,) -# Returns the style byte at the position +# Returns the style byte at the position. get int GetStyleAt=2010(position pos,) -# Redoes the next action on the undo history +# Redoes the next action on the undo history. fun void Redo=2011(,) # Choose between collecting actions into the undo @@ -105,13 +134,13 @@ fun void SelectAll=2013(,) fun void SetSavePoint=2014(,) # Retrieve a buffer of cells. -# Returns the number of bytes in the buffer not including terminating nulls. +# Returns the number of bytes in the buffer not including terminating NULs. fun int GetStyledText=2015(, textrange tr) -# Are there any redoable actions in the undo history. +# Are there any redoable actions in the undo history? fun bool CanRedo=2016(,) -# Retrieve the line number at which a particular marker is located +# Retrieve the line number at which a particular marker is located. fun int MarkerLineFromHandle=2017(int handle,) # Delete a marker. @@ -120,6 +149,7 @@ fun void MarkerDeleteHandle=2018(int handle,) # Is undo history being collected? get bool GetUndoCollection=2019(,) +enu WhiteSpace=SCWS_ val SCWS_INVISIBLE=0 val SCWS_VISIBLEALWAYS=1 val SCWS_VISIBLEAFTERINDENT=2 @@ -132,11 +162,11 @@ get int GetViewWS=2020(,) set void SetViewWS=2021(int viewWS,) # Find the position from a point within the window. -fun int PositionFromPoint=2022(int x, int y) +fun position PositionFromPoint=2022(int x, int y) # Find the position from a point within the window but return # INVALID_POSITION if not close to text. -fun int PositionFromPointClose=2023(int x, int y) +fun position PositionFromPointClose=2023(int x, int y) # Set caret to start of a line and ensure it is visible. fun void GotoLine=2024(int line,) @@ -155,6 +185,7 @@ fun int GetCurLine=2027(int length, stringresult text) # Retrieve the position of the last correctly styled character. get position GetEndStyled=2028(,) +enu EndOfLine=SC_EOL_ val SC_EOL_CRLF=0 val SC_EOL_CR=1 val SC_EOL_LF=2 @@ -169,23 +200,21 @@ get int GetEOLMode=2030(,) set void SetEOLMode=2031(int eolMode,) # Set the current styling position to pos and the styling mask to mask. -# The styling mask can be used to protect some bits in each styling byte from -# modification. +# The styling mask can be used to protect some bits in each styling byte from modification. fun void StartStyling=2032(position pos, int mask) # Change style from current styling position for length characters to a style # and move the current styling position to after this newly styled segment. fun void SetStyling=2033(int length, int style) -# Is drawing done first into a buffer or direct to the screen. +# Is drawing done first into a buffer or direct to the screen? get bool GetBufferedDraw=2034(,) # If drawing is buffered then each line of text is drawn into a bitmap buffer # before drawing it to the screen to avoid flicker. set void SetBufferedDraw=2035(bool buffered,) -# Change the visible size of a tab to be a multiple of the width of a space -# character. +# Change the visible size of a tab to be a multiple of the width of a space character. set void SetTabWidth=2036(int tabWidth,) # Retrieve the visible size of a tab. @@ -195,14 +224,18 @@ get int GetTabWidth=2121(,) # This is the same value as CP_UTF8 in Windows val SC_CP_UTF8=65001 +# The SC_CP_DBCS value can be used to indicate a DBCS mode for GTK+. +val SC_CP_DBCS=1 + # Set the code page used to interpret the bytes of the document as characters. # The SC_CP_UTF8 value can be used to enter Unicode mode. set void SetCodePage=2037(int codePage,) -# In palette mode, Scintilla uses the environments palette calls to display +# In palette mode, Scintilla uses the environment's palette calls to display # more colours. This may lead to ugly displays. set void SetUsePalette=2039(bool usePalette,) +enu MarkerSymbol=SC_MARK_ val MARKER_MAX=31 val SC_MARK_CIRCLE=0 val SC_MARK_ROUNDRECT=1 @@ -214,7 +247,7 @@ val SC_MARK_ARROWDOWN=6 val SC_MARK_MINUS=7 val SC_MARK_PLUS=8 -# Shapes used for outlining column +# Shapes used for outlining column. val SC_MARK_VLINE=9 val SC_MARK_LCORNER=10 val SC_MARK_TCORNER=11 @@ -229,7 +262,17 @@ val SC_MARK_CIRCLEPLUSCONNECTED=19 val SC_MARK_CIRCLEMINUS=20 val SC_MARK_CIRCLEMINUSCONNECTED=21 -# Markers used for outlining column +# Invisible mark that only sets the line background color. +val SC_MARK_BACKGROUND=22 +val SC_MARK_DOTDOTDOT=23 +val SC_MARK_ARROWS=24 +val SC_MARK_PIXMAP=25 +val SC_MARK_FULLRECT=26 + +val SC_MARK_CHARACTER=10000 + +enu MarkerOutline=SC_MARKNUM_ +# Markers used for outlining column. val SC_MARKNUM_FOLDEREND=25 val SC_MARKNUM_FOLDEROPENMID=26 val SC_MARKNUM_FOLDERMIDTAIL=27 @@ -238,6 +281,8 @@ val SC_MARKNUM_FOLDERSUB=29 val SC_MARKNUM_FOLDER=30 val SC_MARKNUM_FOLDEROPEN=31 +val SC_MASK_FOLDERS=0xFE000000 + # Set the symbol used for a particular marker number. fun void MarkerDefine=2040(int markerNumber, int markerSymbol) @@ -247,13 +292,13 @@ fun void MarkerSetFore=2041(int markerNumber, colour fore) # Set the background colour used for a particular marker number. fun void MarkerSetBack=2042(int markerNumber, colour back) -# Add a marker to a line. -fun void MarkerAdd=2043(int line, int markerNumber) +# Add a marker to a line, returning an ID which can be used to find or delete the marker. +fun int MarkerAdd=2043(int line, int markerNumber) -# Delete a marker from a line +# Delete a marker from a line. fun void MarkerDelete=2044(int line, int markerNumber) -# Delete all markers with a particular number from all lines +# Delete all markers with a particular number from all lines. fun void MarkerDeleteAll=2045(int markerNumber,) # Get a bit mask of all the markers set on a line. @@ -265,8 +310,20 @@ fun int MarkerNext=2047(int lineStart, int markerMask) # Find the previous line before lineStart that includes a marker in mask. fun int MarkerPrevious=2048(int lineStart, int markerMask) +# Define a marker from a pixmap. +fun void MarkerDefinePixmap=2049(int markerNumber, string pixmap) + +# Add a set of markers to a line. +fun void MarkerAddSet=2466(int line, int set) + +# Set the alpha used for a marker that is drawn in the text area, not the margin. +fun void MarkerSetAlpha=2476(int markerNumber, int alpha) + +enu MarginType=SC_MARGIN_ val SC_MARGIN_SYMBOL=0 val SC_MARGIN_NUMBER=1 +val SC_MARGIN_BACK=2 +val SC_MARGIN_FORE=3 # Set a margin to be either numeric or symbolic. set void SetMarginTypeN=2240(int margin, int marginType) @@ -292,16 +349,22 @@ set void SetMarginSensitiveN=2246(int margin, bool sensitive) # Retrieve the mouse click sensitivity of a margin. get bool GetMarginSensitiveN=2247(int margin,) +# Styles in range 32..38 are predefined for parts of the UI and are not used as normal styles. +# Style 39 is for future use. +enu StylesCommon=STYLE_ val STYLE_DEFAULT=32 val STYLE_LINENUMBER=33 val STYLE_BRACELIGHT=34 val STYLE_BRACEBAD=35 val STYLE_CONTROLCHAR=36 val STYLE_INDENTGUIDE=37 -val STYLE_MAX=127 +val STYLE_CALLTIP=38 +val STYLE_LASTPREDEFINED=39 +val STYLE_MAX=255 # Character set identifiers are used in StyleSetCharacterSet. # The values are the same as the Windows *_CHARSET values. +enu CharacterSet=SC_CHARSET_ val SC_CHARSET_ANSI=0 val SC_CHARSET_DEFAULT=1 val SC_CHARSET_BALTIC=186 @@ -313,6 +376,7 @@ val SC_CHARSET_HANGUL=129 val SC_CHARSET_MAC=77 val SC_CHARSET_OEM=255 val SC_CHARSET_RUSSIAN=204 +val SC_CHARSET_CYRILLIC=1251 val SC_CHARSET_SHIFTJIS=128 val SC_CHARSET_SYMBOL=2 val SC_CHARSET_TURKISH=162 @@ -321,6 +385,7 @@ val SC_CHARSET_HEBREW=177 val SC_CHARSET_ARABIC=178 val SC_CHARSET_VIETNAMESE=163 val SC_CHARSET_THAI=222 +val SC_CHARSET_8859_15=1000 # Clear all the styles and make equivalent to the global default style. set void StyleClearAll=2050(,) @@ -352,28 +417,86 @@ fun void StyleResetDefault=2058(,) # Set a style to be underlined or not. set void StyleSetUnderline=2059(int style, bool underline) +enu CaseVisible=SC_CASE_ val SC_CASE_MIXED=0 val SC_CASE_UPPER=1 val SC_CASE_LOWER=2 + +# Get the foreground colour of a style. +get colour StyleGetFore=2481(int style,) + +# Get the background colour of a style. +get colour StyleGetBack=2482(int style,) + +# Get is a style bold or not. +get bool StyleGetBold=2483(int style,) + +# Get is a style italic or not. +get bool StyleGetItalic=2484(int style,) + +# Get the size of characters of a style. +get int StyleGetSize=2485(int style,) + +# Get the font of a style. +# Returns the length of the fontName +fun int StyleGetFont=2486(int style, stringresult fontName) + +# Get is a style to have its end of line filled or not. +get bool StyleGetEOLFilled=2487(int style,) + +# Get is a style underlined or not. +get bool StyleGetUnderline=2488(int style,) + +# Get is a style mixed case, or to force upper or lower case. +get int StyleGetCase=2489(int style,) + +# Get the character set of the font in a style. +get int StyleGetCharacterSet=2490(int style,) + +# Get is a style visible or not. +get bool StyleGetVisible=2491(int style,) + +# Get is a style changeable or not (read only). +# Experimental feature, currently buggy. +get bool StyleGetChangeable=2492(int style,) + +# Get is a style a hotspot or not. +get bool StyleGetHotSpot=2493(int style,) + # Set a style to be mixed case, or to force upper or lower case. set void StyleSetCase=2060(int style, int caseForce) # Set the character set of the font in a style. set void StyleSetCharacterSet=2066(int style, int characterSet) +# Set a style to be a hotspot or not. +set void StyleSetHotSpot=2409(int style, bool hotspot) + # Set the foreground colour of the selection and whether to use this setting. fun void SetSelFore=2067(bool useSetting, colour fore) # Set the background colour of the selection and whether to use this setting. fun void SetSelBack=2068(bool useSetting, colour back) +# Get the alpha of the selection. +get int GetSelAlpha=2477(,) + +# Set the alpha of the selection. +set void SetSelAlpha=2478(int alpha,) + +# Is the selection end of line filled? +get bool GetSelEOLFilled=2479(,) + +# Set the selection to have its end of line filled or not. +set void SetSelEOLFilled=2480(bool filled,) + # Set the foreground colour of the caret. set void SetCaretFore=2069(colour fore,) # When key+modifier combination km is pressed perform msg. fun void AssignCmdKey=2070(keymod km, int msg) -# When key+modifier combination km do nothing. +# When key+modifier combination km is pressed do nothing. fun void ClearCmdKey=2071(keymod km,) # Drop all key mappings. @@ -391,8 +514,8 @@ get int GetCaretPeriod=2075(,) # Get the time in milliseconds that the caret is on and off. 0 = steady on. set void SetCaretPeriod=2076(int periodMilliseconds,) -# Set the set of characters making up words for when moving or selecting -# by word. +# Set the set of characters making up words for when moving or selecting by word. +# First sets deaults like SetCharsDefault. set void SetWordChars=2077(, string characters) # Start a sequence of actions that is undone and redone as a unit. @@ -402,17 +525,22 @@ fun void BeginUndoAction=2078(,) # End a sequence of actions that is undone and redone as a unit. fun void EndUndoAction=2079(,) -val INDIC_MAX=7 +# Indicator style enumeration and some constants +enu IndicatorStyle=INDIC_ val INDIC_PLAIN=0 val INDIC_SQUIGGLE=1 val INDIC_TT=2 val INDIC_DIAGONAL=3 val INDIC_STRIKE=4 -val INDIC0_MASK=32 -val INDIC1_MASK=64 -val INDIC2_MASK=128 -val INDICS_MASK=224 -##INDIC0_MASK | INDIC1_MASK | INDIC2_MASK +val INDIC_HIDDEN=5 +val INDIC_BOX=6 +val INDIC_ROUNDBOX=7 +val INDIC_MAX=31 +val INDIC_CONTAINER=8 +val INDIC0_MASK=0x20 +val INDIC1_MASK=0x40 +val INDIC2_MASK=0x80 +val INDICS_MASK=0xE0 # Set an indicator to plain, squiggle or TT. set void IndicSetStyle=2080(int indic, int style) @@ -426,8 +554,20 @@ set void IndicSetFore=2082(int indic, colour fore) # Retrieve the foreground colour of an indicator. get colour IndicGetFore=2083(int indic,) -# Divide each styling byte into lexical class bits (default:5) and indicator -# bits (default:3). If a lexer requires more than 32 lexical states, then this +# Set an indicator to draw under text or over(default). +set void IndicSetUnder=2510(int indic, bool under) + +# Retrieve whether indicator drawn under or over text. +get bool IndicGetUnder=2511(int indic,) + +# Set the foreground colour of all whitespace and whether to use this setting. +fun void SetWhitespaceFore=2084(bool useSetting, colour fore) + +# Set the background colour of all whitespace and whether to use this setting. +fun void SetWhitespaceBack=2085(bool useSetting, colour back) + +# Divide each styling byte into lexical class bits (default: 5) and indicator +# bits (default: 3). If a lexer requires more than 32 lexical states, then this # is used to expand the possible states. set void SetStyleBits=2090(int bits,) @@ -455,6 +595,10 @@ get colour GetCaretLineBack=2097(,) # Set the colour of the background of the line containing the caret. set void SetCaretLineBack=2098(colour back,) +# Set a style to be changeable or not (read only). +# Experimental feature, currently buggy. +set void StyleSetChangeable=2099(int style, bool changeable) + # Display a auto-completion list. # The lenEntered parameter indicates how many characters before # the caret should be used to provide context. @@ -466,8 +610,7 @@ fun void AutoCCancel=2101(,) # Is there an auto-completion list visible? fun bool AutoCActive=2102(,) -# Retrieve the position of the caret when the auto-completion list was -# displayed. +# Retrieve the position of the caret when the auto-completion list was displayed. fun position AutoCPosStart=2103(,) # User has selected an item so remove the list and insert the selection. @@ -476,8 +619,8 @@ fun void AutoCComplete=2104(,) # Define a set of character that when typed cancel the auto-completion list. fun void AutoCStops=2105(, string characterSet) -# Change the separator character in the string setting up an auto-completion -# list. Default is space but can be changed if items contain space. +# Change the separator character in the string setting up an auto-completion list. +# Default is space but can be changed if items contain space. set void AutoCSetSeparator=2106(int separatorCharacter,) # Retrieve the auto-completion list separator character. @@ -493,7 +636,8 @@ set void AutoCSetCancelAtStart=2110(bool cancel,) # Retrieve whether auto-completion cancelled by backspacing before start. get bool AutoCGetCancelAtStart=2111(,) -# Define a set of character that when typed fills up the selected word. +# Define a set of characters that when typed will cause the autocompletion to +# choose the selected item. set void AutoCSetFillUps=2112(, string characterSet) # Should a single item auto-completion list automatically choose the item. @@ -511,12 +655,47 @@ get bool AutoCGetIgnoreCase=2116(,) # Display a list of strings and send notification when user chooses one. fun void UserListShow=2117(int listType, string itemList) -# Set whether or not autocompletion is hidden automatically when nothing matches +# Set whether or not autocompletion is hidden automatically when nothing matches. set void AutoCSetAutoHide=2118(bool autoHide,) -# Retrieve whether or not autocompletion is hidden automatically when nothing matches +# Retrieve whether or not autocompletion is hidden automatically when nothing matches. get bool AutoCGetAutoHide=2119(,) +# Set whether or not autocompletion deletes any word characters +# after the inserted text upon completion. +set void AutoCSetDropRestOfWord=2270(bool dropRestOfWord,) + +# Retrieve whether or not autocompletion deletes any word characters +# after the inserted text upon completion. +get bool AutoCGetDropRestOfWord=2271(,) + +# Register an XPM image for use in autocompletion lists. +fun void RegisterImage=2405(int type, string xpmData) + +# Clear all the registered XPM images. +fun void ClearRegisteredImages=2408(,) + +# Retrieve the auto-completion list type-separator character. +get int AutoCGetTypeSeparator=2285(,) + +# Change the type-separator character in the string setting up an auto-completion list. +# Default is '?' but can be changed if items contain '?'. +set void AutoCSetTypeSeparator=2286(int separatorCharacter,) + +# Set the maximum width, in characters, of auto-completion and user lists. +# Set to 0 to autosize to fit longest item, which is the default. +set void AutoCSetMaxWidth=2208(int characterCount,) + +# Get the maximum width, in characters, of auto-completion and user lists. +get int AutoCGetMaxWidth=2209(,) + +# Set the maximum height, in rows, of auto-completion and user lists. +# The default is 5 rows. +set void AutoCSetMaxHeight=2210(int rowCount,) + +# Set the maximum height, in rows, of auto-completion and user lists. +get int AutoCGetMaxHeight=2211(,) + # Set the number of spaces used for one level of indentation. set void SetIndent=2122(int indentSize,) @@ -548,11 +727,17 @@ set void SetHScrollBar=2130(bool show,) # Is the horizontal scroll bar visible? get bool GetHScrollBar=2131(,) +enu IndentView=SC_IV_ +val SC_IV_NONE=0 +val SC_IV_REAL=1 +val SC_IV_LOOKFORWARD=2 +val SC_IV_LOOKBOTH=3 + # Show or hide indentation guides. -set void SetIndentationGuides=2132(bool show,) +set void SetIndentationGuides=2132(int indentView,) # Are the indentation guides visible? -get bool GetIndentationGuides=2133(,) +get int GetIndentationGuides=2133(,) # Set the highlighted indentation guide column. # 0 = no highlighted guide. @@ -597,6 +782,7 @@ set void SetPrintMagnification=2146(int magnification,) # Returns the print magnification. get int GetPrintMagnification=2147(,) +enu PrintOption=SC_PRINT_ # PrintColourMode - use same colours as screen. val SC_PRINT_NORMAL=0 # PrintColourMode - invert the light value of each style for printing. @@ -614,18 +800,20 @@ set void SetPrintColourMode=2148(int mode,) # Returns the print colour mode. get int GetPrintColourMode=2149(,) +enu FindOption=SCFIND_ val SCFIND_WHOLEWORD=2 val SCFIND_MATCHCASE=4 val SCFIND_WORDSTART=0x00100000 val SCFIND_REGEXP=0x00200000 +val SCFIND_POSIX=0x00400000 # Find some text in the document. fun position FindText=2150(int flags, findtext ft) -# On Windows will draw the document into a display context such as a printer. -fun void FormatRange=2151(bool draw, formatrange fr) +# On Windows, will draw the document into a display context such as a printer. +fun position FormatRange=2151(bool draw, formatrange fr) -# Retrieve the line at the top of the display. +# Retrieve the display line at the top of the display. get int GetFirstVisibleLine=2152(,) # Retrieve the contents of a line. @@ -655,7 +843,7 @@ fun void SetSel=2160(position start, position end) # Retrieve the selected text. # Return the length of the text. -fun int GetSelText=2161(,stringresult text) +fun int GetSelText=2161(, stringresult text) # Retrieve a range of text. # Return the length of the text. @@ -674,7 +862,7 @@ fun int PointYFromPosition=2165(, position pos) fun int LineFromPosition=2166(position pos,) # Retrieve the position at the start of a line. -fun int PositionFromLine=2167(int line,) +fun position PositionFromLine=2167(int line,) # Scroll horizontally and vertically. fun void LineScroll=2168(int columns, int lines) @@ -694,7 +882,7 @@ fun void Null=2172(,) # Will a paste succeed? fun bool CanPaste=2173(,) -# Are there any undoable actions in the undo history. +# Are there any undoable actions in the undo history? fun bool CanUndo=2174(,) # Delete the undo history. @@ -732,16 +920,16 @@ get int GetDirectFunction=2184(,) # the function returned by GetDirectFunction. get int GetDirectPointer=2185(,) -# Set to overtype (true) or insert mode +# Set to overtype (true) or insert mode. set void SetOvertype=2186(bool overtype,) # Returns true if overtype mode is active otherwise false is returned. get bool GetOvertype=2187(,) -# Set the width of the insert mode caret +# Set the width of the insert mode caret. set void SetCaretWidth=2188(int pixelWidth,) -# Returns the width of the insert mode caret +# Returns the width of the insert mode caret. get int GetCaretWidth=2189(,) # Sets the position that starts the target which is used for updating the @@ -759,10 +947,12 @@ set void SetTargetEnd=2192(position pos,) get position GetTargetEnd=2193(,) # Replace the target text with the argument text. +# Text is counted so it can contain NULs. # Returns the length of the replacement text. fun int ReplaceTarget=2194(int length, string text) # Replace the target text with the argument text after \d processing. +# Text is counted so it can contain NULs. # Looks for \d where d is between 1 and 9 and replaces these with the strings # matched in the last search operation which were surrounded by \( and \). # Returns the length of the replacement text including any change @@ -770,14 +960,14 @@ fun int ReplaceTarget=2194(int length, string text) fun int ReplaceTargetRE=2195(int length, string text) # Search for a counted string in the target and set the target to the found -# range. +# range. Text is counted so it can contain NULs. # Returns length of range or -1 for failure in which case target is not moved. fun int SearchInTarget=2197(int length, string text) -# Set the search flags used by SearchInTarget +# Set the search flags used by SearchInTarget. set void SetSearchFlags=2198(int flags,) -# Get the search flags used by SearchInTarget +# Get the search flags used by SearchInTarget. get int GetSearchFlags=2199(,) # Show a call tip containing a definition near position pos. @@ -798,15 +988,32 @@ fun void CallTipSetHlt=2204(int start, int end) # Set the background colour for the call tip. set void CallTipSetBack=2205(colour back,) +# Set the foreground colour for the call tip. +set void CallTipSetFore=2206(colour fore,) + +# Set the foreground colour for the highlighted part of the call tip. +set void CallTipSetForeHlt=2207(colour fore,) + +# Enable use of STYLE_CALLTIP and set call tip tab size in pixels. +set void CallTipUseStyle=2212(int tabSize,) + # Find the display line of a document line taking hidden lines into account. fun int VisibleFromDocLine=2220(int line,) # Find the document line of a display line taking hidden lines into account. fun int DocLineFromVisible=2221(int lineDisplay,) +# The number of display lines needed to wrap a document line +fun int WrapCount=2235(int line,) + +enu FoldLevel=SC_FOLDLEVEL val SC_FOLDLEVELBASE=0x400 val SC_FOLDLEVELWHITEFLAG=0x1000 val SC_FOLDLEVELHEADERFLAG=0x2000 +val SC_FOLDLEVELBOXHEADERFLAG=0x4000 +val SC_FOLDLEVELBOXFOOTERFLAG=0x8000 +val SC_FOLDLEVELCONTRACTED=0x10000 +val SC_FOLDLEVELUNINDENT=0x20000 val SC_FOLDLEVELNUMBERMASK=0x0FFF # Set the fold level of a line. @@ -844,20 +1051,28 @@ fun void ToggleFold=2231(int line,) # Ensure a particular line is visible by expanding any header line hiding it. fun void EnsureVisible=2232(int line,) -# Set some debugging options for folding +enu FoldFlag=SC_FOLDFLAG_ +val SC_FOLDFLAG_LINEBEFORE_EXPANDED=0x0002 +val SC_FOLDFLAG_LINEBEFORE_CONTRACTED=0x0004 +val SC_FOLDFLAG_LINEAFTER_EXPANDED=0x0008 +val SC_FOLDFLAG_LINEAFTER_CONTRACTED=0x0010 +val SC_FOLDFLAG_LEVELNUMBERS=0x0040 +val SC_FOLDFLAG_BOX=0x0001 + +# Set some style options for folding. fun void SetFoldFlags=2233(int flags,) # Ensure a particular line is visible by expanding any header line hiding it. # Use the currently set visibility policy to determine which range to display. fun void EnsureVisibleEnforcePolicy=2234(int line,) -# Sets whether a tab pressed when caret is within indentation indents +# Sets whether a tab pressed when caret is within indentation indents. set void SetTabIndents=2260(bool tabIndents,) # Does a tab pressed when caret is within indentation indent? get bool GetTabIndents=2261(,) -# Sets whether a backspace pressed when caret is within indentation unindents +# Sets whether a backspace pressed when caret is within indentation unindents. set void SetBackSpaceUnIndents=2262(bool bsUnIndents,) # Does a backspace pressed when caret is within indentation unindent? @@ -865,12 +1080,130 @@ get bool GetBackSpaceUnIndents=2263(,) val SC_TIME_FOREVER=10000000 -# Sets the time the mouse must sit still to generate a mouse dwell event +# Sets the time the mouse must sit still to generate a mouse dwell event. set void SetMouseDwellTime=2264(int periodMilliseconds,) -# Retrieve the time the mouse must sit still to generate a mouse dwell event +# Retrieve the time the mouse must sit still to generate a mouse dwell event. get int GetMouseDwellTime=2265(,) +# Get position of start of word. +fun int WordStartPosition=2266(position pos, bool onlyWordCharacters) + +# Get position of end of word. +fun int WordEndPosition=2267(position pos, bool onlyWordCharacters) + +enu Wrap=SC_WRAP_ +val SC_WRAP_NONE=0 +val SC_WRAP_WORD=1 +val SC_WRAP_CHAR=2 + +# Sets whether text is word wrapped. +set void SetWrapMode=2268(int mode,) + +# Retrieve whether text is word wrapped. +get int GetWrapMode=2269(,) + +enu WrapVisualFlag=SC_WRAPVISUALFLAG_ +val SC_WRAPVISUALFLAG_NONE=0x0000 +val SC_WRAPVISUALFLAG_END=0x0001 +val SC_WRAPVISUALFLAG_START=0x0002 + +# Set the display mode of visual flags for wrapped lines. +set void SetWrapVisualFlags=2460(int wrapVisualFlags,) + +# Retrive the display mode of visual flags for wrapped lines. +get int GetWrapVisualFlags=2461(,) + +enu WrapVisualLocation=SC_WRAPVISUALFLAGLOC_ +val SC_WRAPVISUALFLAGLOC_DEFAULT=0x0000 +val SC_WRAPVISUALFLAGLOC_END_BY_TEXT=0x0001 +val SC_WRAPVISUALFLAGLOC_START_BY_TEXT=0x0002 + +# Set the location of visual flags for wrapped lines. +set void SetWrapVisualFlagsLocation=2462(int wrapVisualFlagsLocation,) + +# Retrive the location of visual flags for wrapped lines. +get int GetWrapVisualFlagsLocation=2463(,) + +# Set the start indent for wrapped lines. +set void SetWrapStartIndent=2464(int indent,) + +# Retrive the start indent for wrapped lines. +get int GetWrapStartIndent=2465(,) + +enu LineCache=SC_CACHE_ +val SC_CACHE_NONE=0 +val SC_CACHE_CARET=1 +val SC_CACHE_PAGE=2 +val SC_CACHE_DOCUMENT=3 + +# Sets the degree of caching of layout information. +set void SetLayoutCache=2272(int mode,) + +# Retrieve the degree of caching of layout information. +get int GetLayoutCache=2273(,) + +# Sets the document width assumed for scrolling. +set void SetScrollWidth=2274(int pixelWidth,) + +# Retrieve the document width assumed for scrolling. +get int GetScrollWidth=2275(,) + +# Sets whether the maximum width line displayed is used to set scroll width. +set void SetScrollWidthTracking=2516(bool tracking,) + +# Retrieve whether the scroll width tracks wide lines. +get bool GetScrollWidthTracking=2517(,) + +# Measure the pixel width of some text in a particular style. +# NUL terminated text argument. +# Does not handle tab or control characters. +fun int TextWidth=2276(int style, string text) + +# Sets the scroll range so that maximum scroll position has +# the last line at the bottom of the view (default). +# Setting this to false allows scrolling one page below the last line. +set void SetEndAtLastLine=2277(bool endAtLastLine,) + +# Retrieve whether the maximum scroll position has the last +# line at the bottom of the view. +get bool GetEndAtLastLine=2278(,) + +# Retrieve the height of a particular line of text in pixels. +fun int TextHeight=2279(int line,) + +# Show or hide the vertical scroll bar. +set void SetVScrollBar=2280(bool show,) + +# Is the vertical scroll bar visible? +get bool GetVScrollBar=2281(,) + +# Append a string to the end of the document without changing the selection. +fun void AppendText=2282(int length, string text) + +# Is drawing done in two phases with backgrounds drawn before foregrounds? +get bool GetTwoPhaseDraw=2283(,) + +# In twoPhaseDraw mode, drawing is performed in two phases, first the background +# and then the foreground. This avoids chopping off characters that overlap the next run. +set void SetTwoPhaseDraw=2284(bool twoPhase,) + +# Make the target range start and end be the same as the selection range start and end. +fun void TargetFromSelection=2287(,) + +# Join the lines in the target. +fun void LinesJoin=2288(,) + +# Split the lines in the target into lines that are less wide than pixelWidth +# where possible. +fun void LinesSplit=2289(int pixelWidth,) + +# Set the colours used as a chequerboard pattern in the fold margin +fun void SetFoldMarginColour=2290(bool useSetting, colour back) +fun void SetFoldMarginHiColour=2291(bool useSetting, colour fore) + +## New messages go here + ## Start of key messages # Move caret down one line. fun void LineDown=2300(,) @@ -953,8 +1286,7 @@ fun void Cancel=2325(,) # Delete the selection or if no selection, the character before the caret. fun void DeleteBack=2326(,) -# If selection is empty or all on one line replace the selection with a tab -# character. +# If selection is empty or all on one line replace the selection with a tab character. # If more than one line selected, indent the lines. fun void Tab=2327(,) @@ -986,6 +1318,9 @@ fun void DelWordLeft=2335(,) # Delete the word to the right of the caret. fun void DelWordRight=2336(,) +# Delete the word to the right of the caret, but not the trailing non-word characters. +fun void DelWordRightEnd=2518(,) + # Cut the line containing the caret. fun void LineCut=2337(,) @@ -995,6 +1330,9 @@ fun void LineDelete=2338(,) # Switch the current line with the previous. fun void LineTranspose=2339(,) +# Duplicate the current line. +fun void LineDuplicate=2404(,) + # Transform the selection to lower case. fun void LowerCase=2340(,) @@ -1007,14 +1345,48 @@ fun void LineScrollDown=2342(,) # Scroll the document up, keeping the caret visible. fun void LineScrollUp=2343(,) -# Move the caret inside current view if it's not there already +# Delete the selection or if no selection, the character before the caret. +# Will not delete the character before at the start of a line. +fun void DeleteBackNotLine=2344(,) + +# Move caret to first position on display line. +fun void HomeDisplay=2345(,) + +# Move caret to first position on display line extending selection to +# new caret position. +fun void HomeDisplayExtend=2346(,) + +# Move caret to last position on display line. +fun void LineEndDisplay=2347(,) + +# Move caret to last position on display line extending selection to new +# caret position. +fun void LineEndDisplayExtend=2348(,) + +# These are like their namesakes Home(Extend)?, LineEnd(Extend)?, VCHome(Extend)? +# except they behave differently when word-wrap is enabled: +# They go first to the start / end of the display line, like (Home|LineEnd)Display +# The difference is that, the cursor is already at the point, it goes on to the start +# or end of the document line, as appropriate for (Home|LineEnd|VCHome)(Extend)?. + +fun void HomeWrap=2349(,) +fun void HomeWrapExtend=2450(,) +fun void LineEndWrap=2451(,) +fun void LineEndWrapExtend=2452(,) +fun void VCHomeWrap=2453(,) +fun void VCHomeWrapExtend=2454(,) + +# Copy the line containing the caret. +fun void LineCopy=2455(,) + +# Move the caret inside current view if it's not there already. fun void MoveCaretInsideView=2401(,) -# How many characters are on a line, not including end of line characters. +# How many characters are on a line, not including end of line characters? fun int LineLength=2350(int line,) # Highlight the characters at two positions. -fun void BraceHighlight=2351(position pos1,position pos2) +fun void BraceHighlight=2351(position pos1, position pos2) # Highlight the character at a position indicating there is no matching brace. fun void BraceBadLight=2352(position pos,) @@ -1022,21 +1394,22 @@ fun void BraceBadLight=2352(position pos,) # Find the position of a matching brace or INVALID_POSITION if no match. fun position BraceMatch=2353(position pos,) -# Are the end of line characters visible. +# Are the end of line characters visible? get bool GetViewEOL=2355(,) -# Make the end of line characters visible or invisible +# Make the end of line characters visible or invisible. set void SetViewEOL=2356(bool visible,) # Retrieve a pointer to the document object. get int GetDocPointer=2357(,) # Change the document object used. -set void SetDocPointer=2358(,int pointer) +set void SetDocPointer=2358(, int pointer) # Set which document modification events are sent to the container. set void SetModEventMask=2359(int mask,) +enu EdgeVisualStyle=EDGE_ val EDGE_NONE=0 val EDGE_LINE=1 val EDGE_BACKGROUND=2 @@ -1072,24 +1445,6 @@ fun int SearchNext=2367(int flags, string text) # Does not ensure the selection is visible. fun int SearchPrev=2368(int flags, string text) -# Show caret within N lines of edge when it's scrolled to view -# If CARET_SLOP not set then centre caret on screen when it's -# scrolled to view -val CARET_SLOP=0x01 -# Value not used -val CARET_CENTER=0x02 -# If CARET_SLOP also set then reposition whenever outside slop border -# If CARET_SLOP not set then recentre even when visible -val CARET_STRICT=0x04 -# If CARET_XEVEN set then both left and right margins are given equal weight -# rather than favouring left following behaviour. -val CARET_XEVEN=0x08 -# If CARET_XJUMPS set then when caret reaches the margin the display jumps -# enough to leave the caret solidly within the display. -val CARET_XJUMPS=0x10 -# Set the way the line the caret is on is kept visible. -fun void SetCaretPolicy=2369(int caretPolicy, int caretSlop) - # Retrieves the number of lines completely visible. get int LinesOnScreen=2370(,) @@ -1097,7 +1452,7 @@ get int LinesOnScreen=2370(,) # the wrong mouse button. fun void UsePopUp=2371(bool allowPopUp,) -# Is the selection a rectangular. The alternative is the more common stream selection. +# Is the selection rectangular? The alternative is the more common stream selection. get bool SelectionIsRectangle=2372(,) # Set the zoom level. This number of points is added to the size of all fonts. @@ -1117,53 +1472,332 @@ fun void ReleaseDocument=2377(, int doc) # Get which document modification events are sent to the container. get int GetModEventMask=2378(,) -# Change internal focus flag +# Change internal focus flag. set void SetFocus=2380(bool focus,) -# Get internal focus flag +# Get internal focus flag. get bool GetFocus=2381(,) -# Change error status - 0 = OK +# Change error status - 0 = OK. set void SetStatus=2382(int statusCode,) -# Get error status +# Get error status. get int GetStatus=2383(,) -# Set whether the mouse is captured when its button is pressed +# Set whether the mouse is captured when its button is pressed. set void SetMouseDownCaptures=2384(bool captures,) -# Get whether mouse gets captured +# Get whether mouse gets captured. get bool GetMouseDownCaptures=2385(,) +enu CursorShape=SC_CURSOR val SC_CURSORNORMAL=-1 -val SC_CURSORWAIT=3 -# Sets the cursor to one of the SC_CURSOR* values +val SC_CURSORWAIT=4 +# Sets the cursor to one of the SC_CURSOR* values. set void SetCursor=2386(int cursorType,) -# Get cursor type +# Get cursor type. get int GetCursor=2387(,) -# Move to the previous change in capitalistion +# Change the way control characters are displayed: +# If symbol is < 32, keep the drawn way, else, use the given character. +set void SetControlCharSymbol=2388(int symbol,) +# Get the way control characters are displayed. +get int GetControlCharSymbol=2389(,) + +# Move to the previous change in capitalisation. fun void WordPartLeft=2390(,) -# Move to the previous change in capitalistion extending selection to new caret position. +# Move to the previous change in capitalisation extending selection +# to new caret position. fun void WordPartLeftExtend=2391(,) -# Move to the change next in capitalistion +# Move to the change next in capitalisation. fun void WordPartRight=2392(,) -# Move to the next change in capitalistion extending selection to new caret position. +# Move to the next change in capitalisation extending selection +# to new caret position. fun void WordPartRightExtend=2393(,) -# Constants for use with SetVisiblePolicy, similar to SetCaretPolicy +# Constants for use with SetVisiblePolicy, similar to SetCaretPolicy. val VISIBLE_SLOP=0x01 val VISIBLE_STRICT=0x04 -# Set the way the display area is determined when a particular line is to be moved to. +# Set the way the display area is determined when a particular line +# is to be moved to by Find, FindNext, GotoLine, etc. fun void SetVisiblePolicy=2394(int visiblePolicy, int visibleSlop) -# Delete back from the current position to the start of the line +# Delete back from the current position to the start of the line. fun void DelLineLeft=2395(,) -# Delete forwards from the current position to the end of the line +# Delete forwards from the current position to the end of the line. fun void DelLineRight=2396(,) +# Get and Set the xOffset (ie, horizonal scroll position). +set void SetXOffset=2397(int newOffset,) +get int GetXOffset=2398(,) + +# Set the last x chosen value to be the caret x position. +fun void ChooseCaretX=2399(,) + # Set the focus to this Scintilla widget. -# GTK+ Specific fun void GrabFocus=2400(,) +enu CaretPolicy = CARET_ +# Caret policy, used by SetXCaretPolicy and SetYCaretPolicy. +# If CARET_SLOP is set, we can define a slop value: caretSlop. +# This value defines an unwanted zone (UZ) where the caret is... unwanted. +# This zone is defined as a number of pixels near the vertical margins, +# and as a number of lines near the horizontal margins. +# By keeping the caret away from the edges, it is seen within its context, +# so it is likely that the identifier that the caret is on can be completely seen, +# and that the current line is seen with some of the lines following it which are +# often dependent on that line. +val CARET_SLOP=0x01 +# If CARET_STRICT is set, the policy is enforced... strictly. +# The caret is centred on the display if slop is not set, +# and cannot go in the UZ if slop is set. +val CARET_STRICT=0x04 +# If CARET_JUMPS is set, the display is moved more energetically +# so the caret can move in the same direction longer before the policy is applied again. +val CARET_JUMPS=0x10 +# If CARET_EVEN is not set, instead of having symmetrical UZs, +# the left and bottom UZs are extended up to right and top UZs respectively. +# This way, we favour the displaying of useful information: the begining of lines, +# where most code reside, and the lines after the caret, eg. the body of a function. +val CARET_EVEN=0x08 + +# Set the way the caret is kept visible when going sideway. +# The exclusion zone is given in pixels. +fun void SetXCaretPolicy=2402(int caretPolicy, int caretSlop) + +# Set the way the line the caret is on is kept visible. +# The exclusion zone is given in lines. +fun void SetYCaretPolicy=2403(int caretPolicy, int caretSlop) + +# Set printing to line wrapped (SC_WRAP_WORD) or not line wrapped (SC_WRAP_NONE). +set void SetPrintWrapMode=2406(int mode,) + +# Is printing line wrapped? +get int GetPrintWrapMode=2407(,) + +# Set a fore colour for active hotspots. +set void SetHotspotActiveFore=2410(bool useSetting, colour fore) + +# Get the fore colour for active hotspots. +get colour GetHotspotActiveFore=2494(,) + +# Set a back colour for active hotspots. +set void SetHotspotActiveBack=2411(bool useSetting, colour back) + +# Get the back colour for active hotspots. +get colour GetHotspotActiveBack=2495(,) + +# Enable / Disable underlining active hotspots. +set void SetHotspotActiveUnderline=2412(bool underline,) + +# Get whether underlining for active hotspots. +get bool GetHotspotActiveUnderline=2496(,) + +# Limit hotspots to single line so hotspots on two lines don't merge. +set void SetHotspotSingleLine=2421(bool singleLine,) + +# Get the HotspotSingleLine property +get bool GetHotspotSingleLine=2497(,) + +# Move caret between paragraphs (delimited by empty lines). +fun void ParaDown=2413(,) +fun void ParaDownExtend=2414(,) +fun void ParaUp=2415(,) +fun void ParaUpExtend=2416(,) + +# Given a valid document position, return the previous position taking code +# page into account. Returns 0 if passed 0. +fun position PositionBefore=2417(position pos,) + +# Given a valid document position, return the next position taking code +# page into account. Maximum value returned is the last position in the document. +fun position PositionAfter=2418(position pos,) + +# Copy a range of text to the clipboard. Positions are clipped into the document. +fun void CopyRange=2419(position start, position end) + +# Copy argument text to the clipboard. +fun void CopyText=2420(int length, string text) + +# Selection Modes +enu SelectionMode=SC_SEL_ +val SC_SEL_STREAM=0 +val SC_SEL_RECTANGLE=1 +val SC_SEL_LINES=2 + +# Set the selection mode to stream (SC_SEL_STREAM) or rectangular (SC_SEL_RECTANGLE) or +# by lines (SC_SEL_LINES). +set void SetSelectionMode=2422(int mode,) + +# Get the mode of the current selection. +get int GetSelectionMode=2423(,) + +# Retrieve the position of the start of the selection at the given line (INVALID_POSITION if no selection on this line). +fun position GetLineSelStartPosition=2424(int line,) + +# Retrieve the position of the end of the selection at the given line (INVALID_POSITION if no selection on this line). +fun position GetLineSelEndPosition=2425(int line,) + +## RectExtended rectangular selection moves +# Move caret down one line, extending rectangular selection to new caret position. +fun void LineDownRectExtend=2426(,) + +# Move caret up one line, extending rectangular selection to new caret position. +fun void LineUpRectExtend=2427(,) + +# Move caret left one character, extending rectangular selection to new caret position. +fun void CharLeftRectExtend=2428(,) + +# Move caret right one character, extending rectangular selection to new caret position. +fun void CharRightRectExtend=2429(,) + +# Move caret to first position on line, extending rectangular selection to new caret position. +fun void HomeRectExtend=2430(,) + +# Move caret to before first visible character on line. +# If already there move to first character on line. +# In either case, extend rectangular selection to new caret position. +fun void VCHomeRectExtend=2431(,) + +# Move caret to last position on line, extending rectangular selection to new caret position. +fun void LineEndRectExtend=2432(,) + +# Move caret one page up, extending rectangular selection to new caret position. +fun void PageUpRectExtend=2433(,) + +# Move caret one page down, extending rectangular selection to new caret position. +fun void PageDownRectExtend=2434(,) + + +# Move caret to top of page, or one page up if already at top of page. +fun void StutteredPageUp=2435(,) + +# Move caret to top of page, or one page up if already at top of page, extending selection to new caret position. +fun void StutteredPageUpExtend=2436(,) + +# Move caret to bottom of page, or one page down if already at bottom of page. +fun void StutteredPageDown=2437(,) + +# Move caret to bottom of page, or one page down if already at bottom of page, extending selection to new caret position. +fun void StutteredPageDownExtend=2438(,) + + +# Move caret left one word, position cursor at end of word. +fun void WordLeftEnd=2439(,) + +# Move caret left one word, position cursor at end of word, extending selection to new caret position. +fun void WordLeftEndExtend=2440(,) + +# Move caret right one word, position cursor at end of word. +fun void WordRightEnd=2441(,) + +# Move caret right one word, position cursor at end of word, extending selection to new caret position. +fun void WordRightEndExtend=2442(,) + +# Set the set of characters making up whitespace for when moving or selecting by word. +# Should be called after SetWordChars. +set void SetWhitespaceChars=2443(, string characters) + +# Reset the set of characters for whitespace and word characters to the defaults. +fun void SetCharsDefault=2444(,) + +# Get currently selected item position in the auto-completion list +fun int AutoCGetCurrent=2445(,) + +# Enlarge the document to a particular size of text bytes. +fun void Allocate=2446(int bytes,) + +# Returns the target converted to UTF8. +# Return the length in bytes. +fun int TargetAsUTF8=2447(, stringresult s) + +# Set the length of the utf8 argument for calling EncodedFromUTF8. +# Set to -1 and the string will be measured to the first nul. +fun void SetLengthForEncode=2448(int bytes,) + +# Translates a UTF8 string into the document encoding. +# Return the length of the result in bytes. +# On error return 0. +fun int EncodedFromUTF8=2449(string utf8, stringresult encoded) + +# Find the position of a column on a line taking into account tabs and +# multi-byte characters. If beyond end of line, return line end position. +fun int FindColumn=2456(int line, int column) + +# Can the caret preferred x position only be changed by explicit movement commands? +get bool GetCaretSticky=2457(,) + +# Stop the caret preferred x position changing when the user types. +set void SetCaretSticky=2458(bool useCaretStickyBehaviour,) + +# Switch between sticky and non-sticky: meant to be bound to a key. +fun void ToggleCaretSticky=2459(,) + +# Enable/Disable convert-on-paste for line endings +set void SetPasteConvertEndings=2467(bool convert,) + +# Get convert-on-paste setting +get bool GetPasteConvertEndings=2468(,) + +# Duplicate the selection. If selection empty duplicate the line containing the caret. +fun void SelectionDuplicate=2469(,) + +val SC_ALPHA_TRANSPARENT=0 +val SC_ALPHA_OPAQUE=255 +val SC_ALPHA_NOALPHA=256 + +# Set background alpha of the caret line. +set void SetCaretLineBackAlpha=2470(int alpha,) + +# Get the background alpha of the caret line. +get int GetCaretLineBackAlpha=2471(,) + +# Caret Styles +enu CaretStyle=CARETSTYLE_ +val CARETSTYLE_INVISIBLE=0 +val CARETSTYLE_LINE=1 +val CARETSTYLE_BLOCK=2 + +# Set the style of the caret to be drawn. +set void SetCaretStyle=2512(int caretStyle,) + +# Returns the current style of the caret. +get int GetCaretStyle=2513(,) + +# Set the indicator used for IndicatorFillRange and IndicatorClearRange +set void SetIndicatorCurrent=2500(int indicator,) + +# Get the current indicator +get int GetIndicatorCurrent=2501(,) + +# Set the value used for IndicatorFillRange +set void SetIndicatorValue=2502(int value,) + +# Get the current indicator vaue +get int GetIndicatorValue=2503(,) + +# Turn a indicator on over a range. +fun void IndicatorFillRange=2504(int position, int fillLength) + +# Turn a indicator off over a range. +fun void IndicatorClearRange=2505(int position, int clearLength) + +# Are any indicators present at position? +fun int IndicatorAllOnFor=2506(int position,) + +# What value does a particular indicator have at at a position? +fun int IndicatorValueAt=2507(int indicator, int position) + +# Where does a particular indicator start? +fun int IndicatorStart=2508(int indicator, int position) + +# Where does a particular indicator end? +fun int IndicatorEnd=2509(int indicator, int position) + +# Set number of entries in position cache +set void SetPositionCache=2514(int size,) + +# How many entries are allocated to the position cache? +get int GetPositionCache=2515(,) + # Start notifying the container of all key presses and commands. fun void StartRecord=3001(,) @@ -1182,16 +1816,37 @@ fun void Colourise=4003(position start, position end) # Set up a value that may be used by a lexer for some optional feature. set void SetProperty=4004(string key, string value) +# Maximum value of keywordSet parameter of SetKeyWords. +val KEYWORDSET_MAX=8 + # Set up the key words used by the lexer. set void SetKeyWords=4005(int keywordSet, string keyWords) # Set the lexing language of the document based on string name. set void SetLexerLanguage=4006(, string language) +# Load a lexer library (dll / so). +fun void LoadLexerLibrary=4007(, string path) + +# Retrieve a "property" value previously set with SetProperty. +fun int GetProperty=4008(string key, stringresult buf) + +# Retrieve a "property" value previously set with SetProperty, +# with "$()" variable replacement on returned buffer. +fun int GetPropertyExpanded=4009(string key, stringresult buf) + +# Retrieve a "property" value previously set with SetProperty, +# interpreted as an int AFTER any "$()" variable replacement. +get int GetPropertyInt=4010(string key,) + +# Retrieve the number of bits the current lexer needs for styling. +get int GetStyleBitsNeeded=4011(,) + # Notifications -# Type of modification and the action which caused the modification +# Type of modification and the action which caused the modification. # These are defined as a bit mask to make it easy to specify which notifications are wanted. # One bit is set from each of SC_MOD_* and SC_PERFORMED_*. +enu ModificationFlags=SC_MOD_ SC_PERFORMED_ SC_LAST val SC_MOD_INSERTTEXT=0x1 val SC_MOD_DELETETEXT=0x2 val SC_MOD_CHANGESTYLE=0x4 @@ -1199,22 +1854,30 @@ val SC_MOD_CHANGEFOLD=0x8 val SC_PERFORMED_USER=0x10 val SC_PERFORMED_UNDO=0x20 val SC_PERFORMED_REDO=0x40 +val SC_MULTISTEPUNDOREDO=0x80 val SC_LASTSTEPINUNDOREDO=0x100 val SC_MOD_CHANGEMARKER=0x200 val SC_MOD_BEFOREINSERT=0x400 val SC_MOD_BEFOREDELETE=0x800 -val SC_MODEVENTMASKALL=0xF77 +val SC_MULTILINEUNDOREDO=0x1000 +val SC_STARTACTION=0x2000 +val SC_MOD_CHANGEINDICATOR=0x4000 +val SC_MOD_CHANGELINESTATE=0x8000 +val SC_MODEVENTMASKALL=0xFFFF # For compatibility, these go through the COMMAND notification rather than NOTIFY -# and have exactly the same values as the EN_* constants. +# and should have had exactly the same values as the EN_* constants. +# Unfortunately the SETFOCUS and KILLFOCUS are flipped over from EN_* +# As clients depend on these constants, this will not be changed. val SCEN_CHANGE=768 val SCEN_SETFOCUS=512 val SCEN_KILLFOCUS=256 -# Symbolic key codes and modifier flags -# ASCII and other printable characters below 256 -# Extended keys above 300 +# Symbolic key codes and modifier flags. +# ASCII and other printable characters below 256. +# Extended keys above 300. +enu Keys=SCK_ val SCK_DOWN=300 val SCK_UP=301 val SCK_LEFT=302 @@ -1232,13 +1895,19 @@ val SCK_RETURN=13 val SCK_ADD=310 val SCK_SUBTRACT=311 val SCK_DIVIDE=312 +val SCK_WIN=313 +val SCK_RWIN=314 +val SCK_MENU=315 +enu KeyMod=SCMOD_ +val SCMOD_NORM=0 val SCMOD_SHIFT=1 val SCMOD_CTRL=2 val SCMOD_ALT=4 ################################################ # For SciLexer.h +enu Lexer=SCLEX_ val SCLEX_CONTAINER=0 val SCLEX_NULL=1 val SCLEX_PYTHON=2 @@ -1265,10 +1934,71 @@ val SCLEX_RUBY=22 val SCLEX_EIFFEL=23 val SCLEX_EIFFELKW=24 val SCLEX_TCL=25 +val SCLEX_NNCRONTAB=26 +val SCLEX_BULLANT=27 +val SCLEX_VBSCRIPT=28 +val SCLEX_BAAN=31 +val SCLEX_MATLAB=32 +val SCLEX_SCRIPTOL=33 +val SCLEX_ASM=34 +val SCLEX_CPPNOCASE=35 +val SCLEX_FORTRAN=36 +val SCLEX_F77=37 +val SCLEX_CSS=38 +val SCLEX_POV=39 +val SCLEX_LOUT=40 +val SCLEX_ESCRIPT=41 +val SCLEX_PS=42 +val SCLEX_NSIS=43 +val SCLEX_MMIXAL=44 +val SCLEX_CLW=45 +val SCLEX_CLWNOCASE=46 +val SCLEX_LOT=47 +val SCLEX_YAML=48 +val SCLEX_TEX=49 +val SCLEX_METAPOST=50 +val SCLEX_POWERBASIC=51 +val SCLEX_FORTH=52 +val SCLEX_ERLANG=53 +val SCLEX_OCTAVE=54 +val SCLEX_MSSQL=55 +val SCLEX_VERILOG=56 +val SCLEX_KIX=57 +val SCLEX_GUI4CLI=58 +val SCLEX_SPECMAN=59 +val SCLEX_AU3=60 +val SCLEX_APDL=61 +val SCLEX_BASH=62 +val SCLEX_ASN1=63 +val SCLEX_VHDL=64 +val SCLEX_CAML=65 +val SCLEX_BLITZBASIC=66 +val SCLEX_PUREBASIC=67 +val SCLEX_HASKELL=68 +val SCLEX_PHPSCRIPT=69 +val SCLEX_TADS3=70 +val SCLEX_REBOL=71 +val SCLEX_SMALLTALK=72 +val SCLEX_FLAGSHIP=73 +val SCLEX_CSOUND=74 +val SCLEX_FREEBASIC=75 +val SCLEX_INNOSETUP=76 +val SCLEX_OPAL=77 +val SCLEX_SPICE=78 +val SCLEX_D=79 +val SCLEX_CMAKE=80 +val SCLEX_GAP=81 +val SCLEX_PLM=82 +val SCLEX_PROGRESS=83 +val SCLEX_ABAQUS=84 +val SCLEX_ASYMPTOTE=85 +val SCLEX_R=86 + # When a lexer specifies its language as SCLEX_AUTOMATIC it receives a # value assigned in sequence from SCLEX_AUTOMATIC+1. val SCLEX_AUTOMATIC=1000 # Lexical states for SCLEX_PYTHON +lex Python=SCLEX_PYTHON SCE_P_ val SCE_P_DEFAULT=0 val SCE_P_COMMENTLINE=1 val SCE_P_NUMBER=2 @@ -1283,7 +2013,12 @@ val SCE_P_OPERATOR=10 val SCE_P_IDENTIFIER=11 val SCE_P_COMMENTBLOCK=12 val SCE_P_STRINGEOL=13 -# Lexical states for SCLEX_CPP, SCLEX_VB +val SCE_P_WORD2=14 +val SCE_P_DECORATOR=15 +# Lexical states for SCLEX_CPP +lex Cpp=SCLEX_CPP SCE_C_ +lex Pascal=SCLEX_PASCAL SCE_C_ +lex BullAnt=SCLEX_BULLANT SCE_C_ val SCE_C_DEFAULT=0 val SCE_C_COMMENT=1 val SCE_C_COMMENTLINE=2 @@ -1301,7 +2036,58 @@ val SCE_C_VERBATIM=13 val SCE_C_REGEX=14 val SCE_C_COMMENTLINEDOC=15 val SCE_C_WORD2=16 +val SCE_C_COMMENTDOCKEYWORD=17 +val SCE_C_COMMENTDOCKEYWORDERROR=18 +val SCE_C_GLOBALCLASS=19 +# Lexical states for SCLEX_D +lex D=SCLEX_D SCE_D_ +val SCE_D_DEFAULT=0 +val SCE_D_COMMENT=1 +val SCE_D_COMMENTLINE=2 +val SCE_D_COMMENTDOC=3 +val SCE_D_COMMENTNESTED=4 +val SCE_D_NUMBER=5 +val SCE_D_WORD=6 +val SCE_D_WORD2=7 +val SCE_D_WORD3=8 +val SCE_D_TYPEDEF=9 +val SCE_D_STRING=10 +val SCE_D_STRINGEOL=11 +val SCE_D_CHARACTER=12 +val SCE_D_OPERATOR=13 +val SCE_D_IDENTIFIER=14 +val SCE_D_COMMENTLINEDOC=15 +val SCE_D_COMMENTDOCKEYWORD=16 +val SCE_D_COMMENTDOCKEYWORDERROR=17 +# Lexical states for SCLEX_TCL +lex TCL=SCLEX_TCL SCE_TCL_ +val SCE_TCL_DEFAULT=0 +val SCE_TCL_COMMENT=1 +val SCE_TCL_COMMENTLINE=2 +val SCE_TCL_NUMBER=3 +val SCE_TCL_WORD_IN_QUOTE=4 +val SCE_TCL_IN_QUOTE=5 +val SCE_TCL_OPERATOR=6 +val SCE_TCL_IDENTIFIER=7 +val SCE_TCL_SUBSTITUTION=8 +val SCE_TCL_SUB_BRACE=9 +val SCE_TCL_MODIFIER=10 +val SCE_TCL_EXPAND=11 +val SCE_TCL_WORD=12 +val SCE_TCL_WORD2=13 +val SCE_TCL_WORD3=14 +val SCE_TCL_WORD4=15 +val SCE_TCL_WORD5=16 +val SCE_TCL_WORD6=17 +val SCE_TCL_WORD7=18 +val SCE_TCL_WORD8=19 +val SCE_TCL_COMMENT_BOX=20 +val SCE_TCL_BLOCK_COMMENT=21 # Lexical states for SCLEX_HTML, SCLEX_XML +lex HTML=SCLEX_HTML SCE_H +lex XML=SCLEX_XML SCE_H +lex ASP=SCLEX_ASP SCE_H +lex PHP=SCLEX_PHP SCE_H val SCE_H_DEFAULT=0 val SCE_H_TAG=1 val SCE_H_TAGUNKNOWN=2 @@ -1327,7 +2113,17 @@ val SCE_H_VALUE=19 # X-Code val SCE_H_XCCOMMENT=20 # SGML -val SCE_H_SGML=21 +val SCE_H_SGML_DEFAULT=21 +val SCE_H_SGML_COMMAND=22 +val SCE_H_SGML_1ST_PARAM=23 +val SCE_H_SGML_DOUBLESTRING=24 +val SCE_H_SGML_SIMPLESTRING=25 +val SCE_H_SGML_ERROR=26 +val SCE_H_SGML_SPECIAL=27 +val SCE_H_SGML_ENTITY=28 +val SCE_H_SGML_COMMENT=29 +val SCE_H_SGML_1ST_PARAM_COMMENT=30 +val SCE_H_SGML_BLOCK_DEFAULT=31 # Embedded Javascript val SCE_HJ_START=40 val SCE_HJ_DEFAULT=41 @@ -1388,6 +2184,8 @@ val SCE_HP_CLASSNAME=99 val SCE_HP_DEFNAME=100 val SCE_HP_OPERATOR=101 val SCE_HP_IDENTIFIER=102 +# PHP +val SCE_HPHP_COMPLEX_VARIABLE=104 # ASP Python val SCE_HPA_START=105 val SCE_HPA_DEFAULT=106 @@ -1414,6 +2212,7 @@ val SCE_HPHP_COMMENTLINE=125 val SCE_HPHP_HSTRING_VARIABLE=126 val SCE_HPHP_OPERATOR=127 # Lexical states for SCLEX_PERL +lex Perl=SCLEX_PERL SCE_PL_ val SCE_PL_DEFAULT=0 val SCE_PL_ERROR=1 val SCE_PL_COMMENTLINE=2 @@ -1430,6 +2229,7 @@ val SCE_PL_SCALAR=12 val SCE_PL_ARRAY=13 val SCE_PL_HASH=14 val SCE_PL_SYMBOLTABLE=15 +val SCE_PL_VARIABLE_INDEXER=16 val SCE_PL_REGEX=17 val SCE_PL_REGSUBST=18 val SCE_PL_LONGQUOTE=19 @@ -1444,13 +2244,86 @@ val SCE_PL_STRING_QQ=27 val SCE_PL_STRING_QX=28 val SCE_PL_STRING_QR=29 val SCE_PL_STRING_QW=30 +val SCE_PL_POD_VERB=31 +val SCE_PL_SUB_PROTOTYPE=40 +val SCE_PL_FORMAT_IDENT=41 +val SCE_PL_FORMAT=42 +# Lexical states for SCLEX_RUBY +lex Ruby=SCLEX_RUBY SCE_RB_ +val SCE_RB_DEFAULT=0 +val SCE_RB_ERROR=1 +val SCE_RB_COMMENTLINE=2 +val SCE_RB_POD=3 +val SCE_RB_NUMBER=4 +val SCE_RB_WORD=5 +val SCE_RB_STRING=6 +val SCE_RB_CHARACTER=7 +val SCE_RB_CLASSNAME=8 +val SCE_RB_DEFNAME=9 +val SCE_RB_OPERATOR=10 +val SCE_RB_IDENTIFIER=11 +val SCE_RB_REGEX=12 +val SCE_RB_GLOBAL=13 +val SCE_RB_SYMBOL=14 +val SCE_RB_MODULE_NAME=15 +val SCE_RB_INSTANCE_VAR=16 +val SCE_RB_CLASS_VAR=17 +val SCE_RB_BACKTICKS=18 +val SCE_RB_DATASECTION=19 +val SCE_RB_HERE_DELIM=20 +val SCE_RB_HERE_Q=21 +val SCE_RB_HERE_QQ=22 +val SCE_RB_HERE_QX=23 +val SCE_RB_STRING_Q=24 +val SCE_RB_STRING_QQ=25 +val SCE_RB_STRING_QX=26 +val SCE_RB_STRING_QR=27 +val SCE_RB_STRING_QW=28 +val SCE_RB_WORD_DEMOTED=29 +val SCE_RB_STDIN=30 +val SCE_RB_STDOUT=31 +val SCE_RB_STDERR=40 +val SCE_RB_UPPER_BOUND=41 +# Lexical states for SCLEX_VB, SCLEX_VBSCRIPT, SCLEX_POWERBASIC +lex VB=SCLEX_VB SCE_B_ +lex VBScript=SCLEX_VBSCRIPT SCE_B_ +lex PowerBasic=SCLEX_POWERBASIC SCE_B_ +val SCE_B_DEFAULT=0 +val SCE_B_COMMENT=1 +val SCE_B_NUMBER=2 +val SCE_B_KEYWORD=3 +val SCE_B_STRING=4 +val SCE_B_PREPROCESSOR=5 +val SCE_B_OPERATOR=6 +val SCE_B_IDENTIFIER=7 +val SCE_B_DATE=8 +val SCE_B_STRINGEOL=9 +val SCE_B_KEYWORD2=10 +val SCE_B_KEYWORD3=11 +val SCE_B_KEYWORD4=12 +val SCE_B_CONSTANT=13 +val SCE_B_ASM=14 +val SCE_B_LABEL=15 +val SCE_B_ERROR=16 +val SCE_B_HEXNUMBER=17 +val SCE_B_BINNUMBER=18 +# Lexical states for SCLEX_PROPERTIES +lex Properties=SCLEX_PROPERTIES SCE_PROPS_ +val SCE_PROPS_DEFAULT=0 +val SCE_PROPS_COMMENT=1 +val SCE_PROPS_SECTION=2 +val SCE_PROPS_ASSIGNMENT=3 +val SCE_PROPS_DEFVAL=4 +val SCE_PROPS_KEY=5 # Lexical states for SCLEX_LATEX +lex LaTeX=SCLEX_LATEX SCE_L_ val SCE_L_DEFAULT=0 val SCE_L_COMMAND=1 val SCE_L_TAG=2 val SCE_L_MATH=3 val SCE_L_COMMENT=4 # Lexical states for SCLEX_LUA +lex Lua=SCLEX_LUA SCE_LUA_ val SCE_LUA_DEFAULT=0 val SCE_LUA_COMMENT=1 val SCE_LUA_COMMENTLINE=2 @@ -1464,7 +2337,15 @@ val SCE_LUA_PREPROCESSOR=9 val SCE_LUA_OPERATOR=10 val SCE_LUA_IDENTIFIER=11 val SCE_LUA_STRINGEOL=12 +val SCE_LUA_WORD2=13 +val SCE_LUA_WORD3=14 +val SCE_LUA_WORD4=15 +val SCE_LUA_WORD5=16 +val SCE_LUA_WORD6=17 +val SCE_LUA_WORD7=18 +val SCE_LUA_WORD8=19 # Lexical states for SCLEX_ERRORLIST +lex ErrorList=SCLEX_ERRORLIST SCE_ERR_ val SCE_ERR_DEFAULT=0 val SCE_ERR_PYTHON=1 val SCE_ERR_GCC=2 @@ -1474,11 +2355,21 @@ val SCE_ERR_BORLAND=5 val SCE_ERR_PERL=6 val SCE_ERR_NET=7 val SCE_ERR_LUA=8 +val SCE_ERR_CTAG=9 val SCE_ERR_DIFF_CHANGED=10 val SCE_ERR_DIFF_ADDITION=11 val SCE_ERR_DIFF_DELETION=12 val SCE_ERR_DIFF_MESSAGE=13 +val SCE_ERR_PHP=14 +val SCE_ERR_ELF=15 +val SCE_ERR_IFC=16 +val SCE_ERR_IFORT=17 +val SCE_ERR_ABSF=18 +val SCE_ERR_TIDY=19 +val SCE_ERR_JAVA_STACK=20 +val SCE_ERR_VALUE=21 # Lexical states for SCLEX_BATCH +lex Batch=SCLEX_BATCH SCE_BAT_ val SCE_BAT_DEFAULT=0 val SCE_BAT_COMMENT=1 val SCE_BAT_WORD=2 @@ -1488,6 +2379,7 @@ val SCE_BAT_COMMAND=5 val SCE_BAT_IDENTIFIER=6 val SCE_BAT_OPERATOR=7 # Lexical states for SCLEX_MAKEFILE +lex MakeFile=SCLEX_MAKEFILE SCE_MAKE_ val SCE_MAKE_DEFAULT=0 val SCE_MAKE_COMMENT=1 val SCE_MAKE_PREPROCESSOR=2 @@ -1495,7 +2387,17 @@ val SCE_MAKE_IDENTIFIER=3 val SCE_MAKE_OPERATOR=4 val SCE_MAKE_TARGET=5 val SCE_MAKE_IDEOL=9 -# Lexical states for the SCLEX_CONF (Apache Configuration Files Lexer) +# Lexical states for SCLEX_DIFF +lex Diff=SCLEX_DIFF SCE_DIFF_ +val SCE_DIFF_DEFAULT=0 +val SCE_DIFF_COMMENT=1 +val SCE_DIFF_COMMAND=2 +val SCE_DIFF_HEADER=3 +val SCE_DIFF_POSITION=4 +val SCE_DIFF_DELETED=5 +val SCE_DIFF_ADDED=6 +# Lexical states for SCLEX_CONF (Apache Configuration Files Lexer) +lex Conf=SCLEX_CONF SCE_CONF_ val SCE_CONF_DEFAULT=0 val SCE_CONF_COMMENT=1 val SCE_CONF_NUMBER=2 @@ -1506,38 +2408,67 @@ val SCE_CONF_STRING=6 val SCE_CONF_OPERATOR=7 val SCE_CONF_IP=8 val SCE_CONF_DIRECTIVE=9 -# Avenue +# Lexical states for SCLEX_AVE, Avenue +lex Avenue=SCLEX_AVE SCE_AVE_ val SCE_AVE_DEFAULT=0 val SCE_AVE_COMMENT=1 val SCE_AVE_NUMBER=2 val SCE_AVE_WORD=3 -val SCE_AVE_KEYWORD=4 -val SCE_AVE_STATEMENT=5 val SCE_AVE_STRING=6 val SCE_AVE_ENUM=7 val SCE_AVE_STRINGEOL=8 val SCE_AVE_IDENTIFIER=9 val SCE_AVE_OPERATOR=10 +val SCE_AVE_WORD1=11 +val SCE_AVE_WORD2=12 +val SCE_AVE_WORD3=13 +val SCE_AVE_WORD4=14 +val SCE_AVE_WORD5=15 +val SCE_AVE_WORD6=16 # Lexical states for SCLEX_ADA +lex Ada=SCLEX_ADA SCE_ADA_ val SCE_ADA_DEFAULT=0 -val SCE_ADA_COMMENT=1 -val SCE_ADA_NUMBER=2 -val SCE_ADA_WORD=3 -val SCE_ADA_STRING=4 +val SCE_ADA_WORD=1 +val SCE_ADA_IDENTIFIER=2 +val SCE_ADA_NUMBER=3 +val SCE_ADA_DELIMITER=4 val SCE_ADA_CHARACTER=5 -val SCE_ADA_OPERATOR=6 -val SCE_ADA_IDENTIFIER=7 +val SCE_ADA_CHARACTEREOL=6 +val SCE_ADA_STRING=7 val SCE_ADA_STRINGEOL=8 +val SCE_ADA_LABEL=9 +val SCE_ADA_COMMENTLINE=10 +val SCE_ADA_ILLEGAL=11 +# Lexical states for SCLEX_BAAN +lex Baan=SCLEX_BAAN SCE_BAAN_ +val SCE_BAAN_DEFAULT=0 +val SCE_BAAN_COMMENT=1 +val SCE_BAAN_COMMENTDOC=2 +val SCE_BAAN_NUMBER=3 +val SCE_BAAN_WORD=4 +val SCE_BAAN_STRING=5 +val SCE_BAAN_PREPROCESSOR=6 +val SCE_BAAN_OPERATOR=7 +val SCE_BAAN_IDENTIFIER=8 +val SCE_BAAN_STRINGEOL=9 +val SCE_BAAN_WORD2=10 # Lexical states for SCLEX_LISP +lex Lisp=SCLEX_LISP SCE_LISP_ val SCE_LISP_DEFAULT=0 val SCE_LISP_COMMENT=1 val SCE_LISP_NUMBER=2 val SCE_LISP_KEYWORD=3 +val SCE_LISP_KEYWORD_KW=4 +val SCE_LISP_SYMBOL=5 val SCE_LISP_STRING=6 val SCE_LISP_STRINGEOL=8 val SCE_LISP_IDENTIFIER=9 val SCE_LISP_OPERATOR=10 +val SCE_LISP_SPECIAL=11 +val SCE_LISP_MULTI_COMMENT=12 # Lexical states for SCLEX_EIFFEL and SCLEX_EIFFELKW +lex Eiffel=SCLEX_EIFFEL SCE_EIFFEL_ +lex EiffelKW=SCLEX_EIFFELKW SCE_EIFFEL_ val SCE_EIFFEL_DEFAULT=0 val SCE_EIFFEL_COMMENTLINE=1 val SCE_EIFFEL_NUMBER=2 @@ -1547,6 +2478,786 @@ val SCE_EIFFEL_CHARACTER=5 val SCE_EIFFEL_OPERATOR=6 val SCE_EIFFEL_IDENTIFIER=7 val SCE_EIFFEL_STRINGEOL=8 +# Lexical states for SCLEX_NNCRONTAB (nnCron crontab Lexer) +lex NNCronTab=SCLEX_NNCRONTAB SCE_NNCRONTAB_ +val SCE_NNCRONTAB_DEFAULT=0 +val SCE_NNCRONTAB_COMMENT=1 +val SCE_NNCRONTAB_TASK=2 +val SCE_NNCRONTAB_SECTION=3 +val SCE_NNCRONTAB_KEYWORD=4 +val SCE_NNCRONTAB_MODIFIER=5 +val SCE_NNCRONTAB_ASTERISK=6 +val SCE_NNCRONTAB_NUMBER=7 +val SCE_NNCRONTAB_STRING=8 +val SCE_NNCRONTAB_ENVIRONMENT=9 +val SCE_NNCRONTAB_IDENTIFIER=10 +# Lexical states for SCLEX_FORTH (Forth Lexer) +lex Forth=SCLEX_FORTH SCE_FORTH_ +val SCE_FORTH_DEFAULT=0 +val SCE_FORTH_COMMENT=1 +val SCE_FORTH_COMMENT_ML=2 +val SCE_FORTH_IDENTIFIER=3 +val SCE_FORTH_CONTROL=4 +val SCE_FORTH_KEYWORD=5 +val SCE_FORTH_DEFWORD=6 +val SCE_FORTH_PREWORD1=7 +val SCE_FORTH_PREWORD2=8 +val SCE_FORTH_NUMBER=9 +val SCE_FORTH_STRING=10 +val SCE_FORTH_LOCALE=11 +# Lexical states for SCLEX_MATLAB +lex MatLab=SCLEX_MATLAB SCE_MATLAB_ +val SCE_MATLAB_DEFAULT=0 +val SCE_MATLAB_COMMENT=1 +val SCE_MATLAB_COMMAND=2 +val SCE_MATLAB_NUMBER=3 +val SCE_MATLAB_KEYWORD=4 +# single quoted string +val SCE_MATLAB_STRING=5 +val SCE_MATLAB_OPERATOR=6 +val SCE_MATLAB_IDENTIFIER=7 +val SCE_MATLAB_DOUBLEQUOTESTRING=8 +# Lexical states for SCLEX_SCRIPTOL +lex Sol=SCLEX_SCRIPTOL SCE_SCRIPTOL_ +val SCE_SCRIPTOL_DEFAULT=0 +val SCE_SCRIPTOL_WHITE=1 +val SCE_SCRIPTOL_COMMENTLINE=2 +val SCE_SCRIPTOL_PERSISTENT=3 +val SCE_SCRIPTOL_CSTYLE=4 +val SCE_SCRIPTOL_COMMENTBLOCK=5 +val SCE_SCRIPTOL_NUMBER=6 +val SCE_SCRIPTOL_STRING=7 +val SCE_SCRIPTOL_CHARACTER=8 +val SCE_SCRIPTOL_STRINGEOL=9 +val SCE_SCRIPTOL_KEYWORD=10 +val SCE_SCRIPTOL_OPERATOR=11 +val SCE_SCRIPTOL_IDENTIFIER=12 +val SCE_SCRIPTOL_TRIPLE=13 +val SCE_SCRIPTOL_CLASSNAME=14 +val SCE_SCRIPTOL_PREPROCESSOR=15 +# Lexical states for SCLEX_ASM +lex Asm=SCLEX_ASM SCE_ASM_ +val SCE_ASM_DEFAULT=0 +val SCE_ASM_COMMENT=1 +val SCE_ASM_NUMBER=2 +val SCE_ASM_STRING=3 +val SCE_ASM_OPERATOR=4 +val SCE_ASM_IDENTIFIER=5 +val SCE_ASM_CPUINSTRUCTION=6 +val SCE_ASM_MATHINSTRUCTION=7 +val SCE_ASM_REGISTER=8 +val SCE_ASM_DIRECTIVE=9 +val SCE_ASM_DIRECTIVEOPERAND=10 +val SCE_ASM_COMMENTBLOCK=11 +val SCE_ASM_CHARACTER=12 +val SCE_ASM_STRINGEOL=13 +val SCE_ASM_EXTINSTRUCTION=14 +# Lexical states for SCLEX_FORTRAN +lex Fortran=SCLEX_FORTRAN SCE_F_ +lex F77=SCLEX_F77 SCE_F_ +val SCE_F_DEFAULT=0 +val SCE_F_COMMENT=1 +val SCE_F_NUMBER=2 +val SCE_F_STRING1=3 +val SCE_F_STRING2=4 +val SCE_F_STRINGEOL=5 +val SCE_F_OPERATOR=6 +val SCE_F_IDENTIFIER=7 +val SCE_F_WORD=8 +val SCE_F_WORD2=9 +val SCE_F_WORD3=10 +val SCE_F_PREPROCESSOR=11 +val SCE_F_OPERATOR2=12 +val SCE_F_LABEL=13 +val SCE_F_CONTINUATION=14 +# Lexical states for SCLEX_CSS +lex CSS=SCLEX_CSS SCE_CSS_ +val SCE_CSS_DEFAULT=0 +val SCE_CSS_TAG=1 +val SCE_CSS_CLASS=2 +val SCE_CSS_PSEUDOCLASS=3 +val SCE_CSS_UNKNOWN_PSEUDOCLASS=4 +val SCE_CSS_OPERATOR=5 +val SCE_CSS_IDENTIFIER=6 +val SCE_CSS_UNKNOWN_IDENTIFIER=7 +val SCE_CSS_VALUE=8 +val SCE_CSS_COMMENT=9 +val SCE_CSS_ID=10 +val SCE_CSS_IMPORTANT=11 +val SCE_CSS_DIRECTIVE=12 +val SCE_CSS_DOUBLESTRING=13 +val SCE_CSS_SINGLESTRING=14 +val SCE_CSS_IDENTIFIER2=15 +val SCE_CSS_ATTRIBUTE=16 +# Lexical states for SCLEX_POV +lex POV=SCLEX_POV SCE_POV_ +val SCE_POV_DEFAULT=0 +val SCE_POV_COMMENT=1 +val SCE_POV_COMMENTLINE=2 +val SCE_POV_NUMBER=3 +val SCE_POV_OPERATOR=4 +val SCE_POV_IDENTIFIER=5 +val SCE_POV_STRING=6 +val SCE_POV_STRINGEOL=7 +val SCE_POV_DIRECTIVE=8 +val SCE_POV_BADDIRECTIVE=9 +val SCE_POV_WORD2=10 +val SCE_POV_WORD3=11 +val SCE_POV_WORD4=12 +val SCE_POV_WORD5=13 +val SCE_POV_WORD6=14 +val SCE_POV_WORD7=15 +val SCE_POV_WORD8=16 +# Lexical states for SCLEX_LOUT +lex LOUT=SCLEX_LOUT SCE_LOUT_ +val SCE_LOUT_DEFAULT=0 +val SCE_LOUT_COMMENT=1 +val SCE_LOUT_NUMBER=2 +val SCE_LOUT_WORD=3 +val SCE_LOUT_WORD2=4 +val SCE_LOUT_WORD3=5 +val SCE_LOUT_WORD4=6 +val SCE_LOUT_STRING=7 +val SCE_LOUT_OPERATOR=8 +val SCE_LOUT_IDENTIFIER=9 +val SCE_LOUT_STRINGEOL=10 +# Lexical states for SCLEX_ESCRIPT +lex ESCRIPT=SCLEX_ESCRIPT SCE_ESCRIPT_ +val SCE_ESCRIPT_DEFAULT=0 +val SCE_ESCRIPT_COMMENT=1 +val SCE_ESCRIPT_COMMENTLINE=2 +val SCE_ESCRIPT_COMMENTDOC=3 +val SCE_ESCRIPT_NUMBER=4 +val SCE_ESCRIPT_WORD=5 +val SCE_ESCRIPT_STRING=6 +val SCE_ESCRIPT_OPERATOR=7 +val SCE_ESCRIPT_IDENTIFIER=8 +val SCE_ESCRIPT_BRACE=9 +val SCE_ESCRIPT_WORD2=10 +val SCE_ESCRIPT_WORD3=11 +# Lexical states for SCLEX_PS +lex PS=SCLEX_PS SCE_PS_ +val SCE_PS_DEFAULT=0 +val SCE_PS_COMMENT=1 +val SCE_PS_DSC_COMMENT=2 +val SCE_PS_DSC_VALUE=3 +val SCE_PS_NUMBER=4 +val SCE_PS_NAME=5 +val SCE_PS_KEYWORD=6 +val SCE_PS_LITERAL=7 +val SCE_PS_IMMEVAL=8 +val SCE_PS_PAREN_ARRAY=9 +val SCE_PS_PAREN_DICT=10 +val SCE_PS_PAREN_PROC=11 +val SCE_PS_TEXT=12 +val SCE_PS_HEXSTRING=13 +val SCE_PS_BASE85STRING=14 +val SCE_PS_BADSTRINGCHAR=15 +# Lexical states for SCLEX_NSIS +lex NSIS=SCLEX_NSIS SCE_NSIS_ +val SCE_NSIS_DEFAULT=0 +val SCE_NSIS_COMMENT=1 +val SCE_NSIS_STRINGDQ=2 +val SCE_NSIS_STRINGLQ=3 +val SCE_NSIS_STRINGRQ=4 +val SCE_NSIS_FUNCTION=5 +val SCE_NSIS_VARIABLE=6 +val SCE_NSIS_LABEL=7 +val SCE_NSIS_USERDEFINED=8 +val SCE_NSIS_SECTIONDEF=9 +val SCE_NSIS_SUBSECTIONDEF=10 +val SCE_NSIS_IFDEFINEDEF=11 +val SCE_NSIS_MACRODEF=12 +val SCE_NSIS_STRINGVAR=13 +val SCE_NSIS_NUMBER=14 +val SCE_NSIS_SECTIONGROUP=15 +val SCE_NSIS_PAGEEX=16 +val SCE_NSIS_FUNCTIONDEF=17 +val SCE_NSIS_COMMENTBOX=18 +# Lexical states for SCLEX_MMIXAL +lex MMIXAL=SCLEX_MMIXAL SCE_MMIXAL_ +val SCE_MMIXAL_LEADWS=0 +val SCE_MMIXAL_COMMENT=1 +val SCE_MMIXAL_LABEL=2 +val SCE_MMIXAL_OPCODE=3 +val SCE_MMIXAL_OPCODE_PRE=4 +val SCE_MMIXAL_OPCODE_VALID=5 +val SCE_MMIXAL_OPCODE_UNKNOWN=6 +val SCE_MMIXAL_OPCODE_POST=7 +val SCE_MMIXAL_OPERANDS=8 +val SCE_MMIXAL_NUMBER=9 +val SCE_MMIXAL_REF=10 +val SCE_MMIXAL_CHAR=11 +val SCE_MMIXAL_STRING=12 +val SCE_MMIXAL_REGISTER=13 +val SCE_MMIXAL_HEX=14 +val SCE_MMIXAL_OPERATOR=15 +val SCE_MMIXAL_SYMBOL=16 +val SCE_MMIXAL_INCLUDE=17 +# Lexical states for SCLEX_CLW +lex Clarion=SCLEX_CLW SCE_CLW_ +val SCE_CLW_DEFAULT=0 +val SCE_CLW_LABEL=1 +val SCE_CLW_COMMENT=2 +val SCE_CLW_STRING=3 +val SCE_CLW_USER_IDENTIFIER=4 +val SCE_CLW_INTEGER_CONSTANT=5 +val SCE_CLW_REAL_CONSTANT=6 +val SCE_CLW_PICTURE_STRING=7 +val SCE_CLW_KEYWORD=8 +val SCE_CLW_COMPILER_DIRECTIVE=9 +val SCE_CLW_RUNTIME_EXPRESSIONS=10 +val SCE_CLW_BUILTIN_PROCEDURES_FUNCTION=11 +val SCE_CLW_STRUCTURE_DATA_TYPE=12 +val SCE_CLW_ATTRIBUTE=13 +val SCE_CLW_STANDARD_EQUATE=14 +val SCE_CLW_ERROR=15 +val SCE_CLW_DEPRECATED=16 +# Lexical states for SCLEX_LOT +lex LOT=SCLEX_LOT SCE_LOT_ +val SCE_LOT_DEFAULT=0 +val SCE_LOT_HEADER=1 +val SCE_LOT_BREAK=2 +val SCE_LOT_SET=3 +val SCE_LOT_PASS=4 +val SCE_LOT_FAIL=5 +val SCE_LOT_ABORT=6 +# Lexical states for SCLEX_YAML +lex YAML=SCLEX_YAML SCE_YAML_ +val SCE_YAML_DEFAULT=0 +val SCE_YAML_COMMENT=1 +val SCE_YAML_IDENTIFIER=2 +val SCE_YAML_KEYWORD=3 +val SCE_YAML_NUMBER=4 +val SCE_YAML_REFERENCE=5 +val SCE_YAML_DOCUMENT=6 +val SCE_YAML_TEXT=7 +val SCE_YAML_ERROR=8 +val SCE_YAML_OPERATOR=9 +# Lexical states for SCLEX_TEX +lex TeX=SCLEX_TEX SCE_TEX_ +val SCE_TEX_DEFAULT=0 +val SCE_TEX_SPECIAL=1 +val SCE_TEX_GROUP=2 +val SCE_TEX_SYMBOL=3 +val SCE_TEX_COMMAND=4 +val SCE_TEX_TEXT=5 +lex Metapost=SCLEX_METAPOST SCE_METAPOST_ +val SCE_METAPOST_DEFAULT=0 +val SCE_METAPOST_SPECIAL=1 +val SCE_METAPOST_GROUP=2 +val SCE_METAPOST_SYMBOL=3 +val SCE_METAPOST_COMMAND=4 +val SCE_METAPOST_TEXT=5 +val SCE_METAPOST_EXTRA=6 +# Lexical states for SCLEX_ERLANG +lex Erlang=SCLEX_ERLANG SCE_ERLANG_ +val SCE_ERLANG_DEFAULT=0 +val SCE_ERLANG_COMMENT=1 +val SCE_ERLANG_VARIABLE=2 +val SCE_ERLANG_NUMBER=3 +val SCE_ERLANG_KEYWORD=4 +val SCE_ERLANG_STRING=5 +val SCE_ERLANG_OPERATOR=6 +val SCE_ERLANG_ATOM=7 +val SCE_ERLANG_FUNCTION_NAME=8 +val SCE_ERLANG_CHARACTER=9 +val SCE_ERLANG_MACRO=10 +val SCE_ERLANG_RECORD=11 +val SCE_ERLANG_SEPARATOR=12 +val SCE_ERLANG_NODE_NAME=13 +val SCE_ERLANG_UNKNOWN=31 +# Lexical states for SCLEX_OCTAVE are identical to MatLab +lex Octave=SCLEX_OCTAVE SCE_MATLAB_ +# Lexical states for SCLEX_MSSQL +lex MSSQL=SCLEX_MSSQL SCE_MSSQL_ +val SCE_MSSQL_DEFAULT=0 +val SCE_MSSQL_COMMENT=1 +val SCE_MSSQL_LINE_COMMENT=2 +val SCE_MSSQL_NUMBER=3 +val SCE_MSSQL_STRING=4 +val SCE_MSSQL_OPERATOR=5 +val SCE_MSSQL_IDENTIFIER=6 +val SCE_MSSQL_VARIABLE=7 +val SCE_MSSQL_COLUMN_NAME=8 +val SCE_MSSQL_STATEMENT=9 +val SCE_MSSQL_DATATYPE=10 +val SCE_MSSQL_SYSTABLE=11 +val SCE_MSSQL_GLOBAL_VARIABLE=12 +val SCE_MSSQL_FUNCTION=13 +val SCE_MSSQL_STORED_PROCEDURE=14 +val SCE_MSSQL_DEFAULT_PREF_DATATYPE=15 +val SCE_MSSQL_COLUMN_NAME_2=16 +# Lexical states for SCLEX_VERILOG +lex Verilog=SCLEX_VERILOG SCE_V_ +val SCE_V_DEFAULT=0 +val SCE_V_COMMENT=1 +val SCE_V_COMMENTLINE=2 +val SCE_V_COMMENTLINEBANG=3 +val SCE_V_NUMBER=4 +val SCE_V_WORD=5 +val SCE_V_STRING=6 +val SCE_V_WORD2=7 +val SCE_V_WORD3=8 +val SCE_V_PREPROCESSOR=9 +val SCE_V_OPERATOR=10 +val SCE_V_IDENTIFIER=11 +val SCE_V_STRINGEOL=12 +val SCE_V_USER=19 +# Lexical states for SCLEX_KIX +lex Kix=SCLEX_KIX SCE_KIX_ +val SCE_KIX_DEFAULT=0 +val SCE_KIX_COMMENT=1 +val SCE_KIX_STRING1=2 +val SCE_KIX_STRING2=3 +val SCE_KIX_NUMBER=4 +val SCE_KIX_VAR=5 +val SCE_KIX_MACRO=6 +val SCE_KIX_KEYWORD=7 +val SCE_KIX_FUNCTIONS=8 +val SCE_KIX_OPERATOR=9 +val SCE_KIX_IDENTIFIER=31 +# Lexical states for SCLEX_GUI4CLI +val SCE_GC_DEFAULT=0 +val SCE_GC_COMMENTLINE=1 +val SCE_GC_COMMENTBLOCK=2 +val SCE_GC_GLOBAL=3 +val SCE_GC_EVENT=4 +val SCE_GC_ATTRIBUTE=5 +val SCE_GC_CONTROL=6 +val SCE_GC_COMMAND=7 +val SCE_GC_STRING=8 +val SCE_GC_OPERATOR=9 +# Lexical states for SCLEX_SPECMAN +lex Specman=SCLEX_SPECMAN SCE_SN_ +val SCE_SN_DEFAULT=0 +val SCE_SN_CODE=1 +val SCE_SN_COMMENTLINE=2 +val SCE_SN_COMMENTLINEBANG=3 +val SCE_SN_NUMBER=4 +val SCE_SN_WORD=5 +val SCE_SN_STRING=6 +val SCE_SN_WORD2=7 +val SCE_SN_WORD3=8 +val SCE_SN_PREPROCESSOR=9 +val SCE_SN_OPERATOR=10 +val SCE_SN_IDENTIFIER=11 +val SCE_SN_STRINGEOL=12 +val SCE_SN_REGEXTAG=13 +val SCE_SN_SIGNAL=14 +val SCE_SN_USER=19 +# Lexical states for SCLEX_AU3 +lex Au3=SCLEX_AU3 SCE_AU3_ +val SCE_AU3_DEFAULT=0 +val SCE_AU3_COMMENT=1 +val SCE_AU3_COMMENTBLOCK=2 +val SCE_AU3_NUMBER=3 +val SCE_AU3_FUNCTION=4 +val SCE_AU3_KEYWORD=5 +val SCE_AU3_MACRO=6 +val SCE_AU3_STRING=7 +val SCE_AU3_OPERATOR=8 +val SCE_AU3_VARIABLE=9 +val SCE_AU3_SENT=10 +val SCE_AU3_PREPROCESSOR=11 +val SCE_AU3_SPECIAL=12 +val SCE_AU3_EXPAND=13 +val SCE_AU3_COMOBJ=14 +val SCE_AU3_UDF=15 +# Lexical states for SCLEX_APDL +lex APDL=SCLEX_APDL SCE_APDL_ +val SCE_APDL_DEFAULT=0 +val SCE_APDL_COMMENT=1 +val SCE_APDL_COMMENTBLOCK=2 +val SCE_APDL_NUMBER=3 +val SCE_APDL_STRING=4 +val SCE_APDL_OPERATOR=5 +val SCE_APDL_WORD=6 +val SCE_APDL_PROCESSOR=7 +val SCE_APDL_COMMAND=8 +val SCE_APDL_SLASHCOMMAND=9 +val SCE_APDL_STARCOMMAND=10 +val SCE_APDL_ARGUMENT=11 +val SCE_APDL_FUNCTION=12 +# Lexical states for SCLEX_BASH +lex Bash=SCLEX_BASH SCE_SH_ +val SCE_SH_DEFAULT=0 +val SCE_SH_ERROR=1 +val SCE_SH_COMMENTLINE=2 +val SCE_SH_NUMBER=3 +val SCE_SH_WORD=4 +val SCE_SH_STRING=5 +val SCE_SH_CHARACTER=6 +val SCE_SH_OPERATOR=7 +val SCE_SH_IDENTIFIER=8 +val SCE_SH_SCALAR=9 +val SCE_SH_PARAM=10 +val SCE_SH_BACKTICKS=11 +val SCE_SH_HERE_DELIM=12 +val SCE_SH_HERE_Q=13 +# Lexical states for SCLEX_ASN1 +lex Asn1=SCLEX_ASN1 SCE_ASN1_ +val SCE_ASN1_DEFAULT=0 +val SCE_ASN1_COMMENT=1 +val SCE_ASN1_IDENTIFIER=2 +val SCE_ASN1_STRING=3 +val SCE_ASN1_OID=4 +val SCE_ASN1_SCALAR=5 +val SCE_ASN1_KEYWORD=6 +val SCE_ASN1_ATTRIBUTE=7 +val SCE_ASN1_DESCRIPTOR=8 +val SCE_ASN1_TYPE=9 +val SCE_ASN1_OPERATOR=10 +# Lexical states for SCLEX_VHDL +lex VHDL=SCLEX_VHDL SCE_VHDL_ +val SCE_VHDL_DEFAULT=0 +val SCE_VHDL_COMMENT=1 +val SCE_VHDL_COMMENTLINEBANG=2 +val SCE_VHDL_NUMBER=3 +val SCE_VHDL_STRING=4 +val SCE_VHDL_OPERATOR=5 +val SCE_VHDL_IDENTIFIER=6 +val SCE_VHDL_STRINGEOL=7 +val SCE_VHDL_KEYWORD=8 +val SCE_VHDL_STDOPERATOR=9 +val SCE_VHDL_ATTRIBUTE=10 +val SCE_VHDL_STDFUNCTION=11 +val SCE_VHDL_STDPACKAGE=12 +val SCE_VHDL_STDTYPE=13 +val SCE_VHDL_USERWORD=14 +# Lexical states for SCLEX_CAML +lex Caml=SCLEX_CAML SCE_CAML_ +val SCE_CAML_DEFAULT=0 +val SCE_CAML_IDENTIFIER=1 +val SCE_CAML_TAGNAME=2 +val SCE_CAML_KEYWORD=3 +val SCE_CAML_KEYWORD2=4 +val SCE_CAML_KEYWORD3=5 +val SCE_CAML_LINENUM=6 +val SCE_CAML_OPERATOR=7 +val SCE_CAML_NUMBER=8 +val SCE_CAML_CHAR=9 +val SCE_CAML_STRING=11 +val SCE_CAML_COMMENT=12 +val SCE_CAML_COMMENT1=13 +val SCE_CAML_COMMENT2=14 +val SCE_CAML_COMMENT3=15 +# Lexical states for SCLEX_HASKELL +lex Haskell=SCLEX_HASKELL SCE_HA_ +val SCE_HA_DEFAULT=0 +val SCE_HA_IDENTIFIER=1 +val SCE_HA_KEYWORD=2 +val SCE_HA_NUMBER=3 +val SCE_HA_STRING=4 +val SCE_HA_CHARACTER=5 +val SCE_HA_CLASS=6 +val SCE_HA_MODULE=7 +val SCE_HA_CAPITAL=8 +val SCE_HA_DATA=9 +val SCE_HA_IMPORT=10 +val SCE_HA_OPERATOR=11 +val SCE_HA_INSTANCE=12 +val SCE_HA_COMMENTLINE=13 +val SCE_HA_COMMENTBLOCK=14 +val SCE_HA_COMMENTBLOCK2=15 +val SCE_HA_COMMENTBLOCK3=16 +# Lexical states of SCLEX_TADS3 +lex TADS3=SCLEX_TADS3 SCE_T3_ +val SCE_T3_DEFAULT=0 +val SCE_T3_X_DEFAULT=1 +val SCE_T3_PREPROCESSOR=2 +val SCE_T3_BLOCK_COMMENT=3 +val SCE_T3_LINE_COMMENT=4 +val SCE_T3_OPERATOR=5 +val SCE_T3_KEYWORD=6 +val SCE_T3_NUMBER=7 +val SCE_T3_IDENTIFIER=8 +val SCE_T3_S_STRING=9 +val SCE_T3_D_STRING=10 +val SCE_T3_X_STRING=11 +val SCE_T3_LIB_DIRECTIVE=12 +val SCE_T3_MSG_PARAM=13 +val SCE_T3_HTML_TAG=14 +val SCE_T3_HTML_DEFAULT=15 +val SCE_T3_HTML_STRING=16 +val SCE_T3_USER1=17 +val SCE_T3_USER2=18 +val SCE_T3_USER3=19 +val SCE_T3_BRACE=20 +# Lexical states for SCLEX_REBOL +lex Rebol=SCLEX_REBOL SCE_REBOL_ +val SCE_REBOL_DEFAULT=0 +val SCE_REBOL_COMMENTLINE=1 +val SCE_REBOL_COMMENTBLOCK=2 +val SCE_REBOL_PREFACE=3 +val SCE_REBOL_OPERATOR=4 +val SCE_REBOL_CHARACTER=5 +val SCE_REBOL_QUOTEDSTRING=6 +val SCE_REBOL_BRACEDSTRING=7 +val SCE_REBOL_NUMBER=8 +val SCE_REBOL_PAIR=9 +val SCE_REBOL_TUPLE=10 +val SCE_REBOL_BINARY=11 +val SCE_REBOL_MONEY=12 +val SCE_REBOL_ISSUE=13 +val SCE_REBOL_TAG=14 +val SCE_REBOL_FILE=15 +val SCE_REBOL_EMAIL=16 +val SCE_REBOL_URL=17 +val SCE_REBOL_DATE=18 +val SCE_REBOL_TIME=19 +val SCE_REBOL_IDENTIFIER=20 +val SCE_REBOL_WORD=21 +val SCE_REBOL_WORD2=22 +val SCE_REBOL_WORD3=23 +val SCE_REBOL_WORD4=24 +val SCE_REBOL_WORD5=25 +val SCE_REBOL_WORD6=26 +val SCE_REBOL_WORD7=27 +val SCE_REBOL_WORD8=28 +# Lexical states for SCLEX_SQL +lex SQL=SCLEX_SQL SCE_SQL_ +val SCE_SQL_DEFAULT=0 +val SCE_SQL_COMMENT=1 +val SCE_SQL_COMMENTLINE=2 +val SCE_SQL_COMMENTDOC=3 +val SCE_SQL_NUMBER=4 +val SCE_SQL_WORD=5 +val SCE_SQL_STRING=6 +val SCE_SQL_CHARACTER=7 +val SCE_SQL_SQLPLUS=8 +val SCE_SQL_SQLPLUS_PROMPT=9 +val SCE_SQL_OPERATOR=10 +val SCE_SQL_IDENTIFIER=11 +val SCE_SQL_SQLPLUS_COMMENT=13 +val SCE_SQL_COMMENTLINEDOC=15 +val SCE_SQL_WORD2=16 +val SCE_SQL_COMMENTDOCKEYWORD=17 +val SCE_SQL_COMMENTDOCKEYWORDERROR=18 +val SCE_SQL_USER1=19 +val SCE_SQL_USER2=20 +val SCE_SQL_USER3=21 +val SCE_SQL_USER4=22 +val SCE_SQL_QUOTEDIDENTIFIER=23 +# Lexical states for SCLEX_SMALLTALK +lex Smalltalk=SCLEX_SMALLTALK SCE_ST_ +val SCE_ST_DEFAULT=0 +val SCE_ST_STRING=1 +val SCE_ST_NUMBER=2 +val SCE_ST_COMMENT=3 +val SCE_ST_SYMBOL=4 +val SCE_ST_BINARY=5 +val SCE_ST_BOOL=6 +val SCE_ST_SELF=7 +val SCE_ST_SUPER=8 +val SCE_ST_NIL=9 +val SCE_ST_GLOBAL=10 +val SCE_ST_RETURN=11 +val SCE_ST_SPECIAL=12 +val SCE_ST_KWSEND=13 +val SCE_ST_ASSIGN=14 +val SCE_ST_CHARACTER=15 +val SCE_ST_SPEC_SEL=16 +# Lexical states for SCLEX_FLAGSHIP (clipper) +lex FlagShip=SCLEX_FLAGSHIP SCE_B_ +val SCE_FS_DEFAULT=0 +val SCE_FS_COMMENT=1 +val SCE_FS_COMMENTLINE=2 +val SCE_FS_COMMENTDOC=3 +val SCE_FS_COMMENTLINEDOC=4 +val SCE_FS_COMMENTDOCKEYWORD=5 +val SCE_FS_COMMENTDOCKEYWORDERROR=6 +val SCE_FS_KEYWORD=7 +val SCE_FS_KEYWORD2=8 +val SCE_FS_KEYWORD3=9 +val SCE_FS_KEYWORD4=10 +val SCE_FS_NUMBER=11 +val SCE_FS_STRING=12 +val SCE_FS_PREPROCESSOR=13 +val SCE_FS_OPERATOR=14 +val SCE_FS_IDENTIFIER=15 +val SCE_FS_DATE=16 +val SCE_FS_STRINGEOL=17 +val SCE_FS_CONSTANT=18 +val SCE_FS_ASM=19 +val SCE_FS_LABEL=20 +val SCE_FS_ERROR=21 +val SCE_FS_HEXNUMBER=22 +val SCE_FS_BINNUMBER=23 +# Lexical states for SCLEX_CSOUND +lex Csound=SCLEX_CSOUND SCE_CSOUND_ +val SCE_CSOUND_DEFAULT=0 +val SCE_CSOUND_COMMENT=1 +val SCE_CSOUND_NUMBER=2 +val SCE_CSOUND_OPERATOR=3 +val SCE_CSOUND_INSTR=4 +val SCE_CSOUND_IDENTIFIER=5 +val SCE_CSOUND_OPCODE=6 +val SCE_CSOUND_HEADERSTMT=7 +val SCE_CSOUND_USERKEYWORD=8 +val SCE_CSOUND_COMMENTBLOCK=9 +val SCE_CSOUND_PARAM=10 +val SCE_CSOUND_ARATE_VAR=11 +val SCE_CSOUND_KRATE_VAR=12 +val SCE_CSOUND_IRATE_VAR=13 +val SCE_CSOUND_GLOBAL_VAR=14 +val SCE_CSOUND_STRINGEOL=15 +# Lexical states for SCLEX_INNOSETUP +lex Inno=SCLEX_INNOSETUP SCE_INNO_ +val SCE_INNO_DEFAULT=0 +val SCE_INNO_COMMENT=1 +val SCE_INNO_KEYWORD=2 +val SCE_INNO_PARAMETER=3 +val SCE_INNO_SECTION=4 +val SCE_INNO_PREPROC=5 +val SCE_INNO_PREPROC_INLINE=6 +val SCE_INNO_COMMENT_PASCAL=7 +val SCE_INNO_KEYWORD_PASCAL=8 +val SCE_INNO_KEYWORD_USER=9 +val SCE_INNO_STRING_DOUBLE=10 +val SCE_INNO_STRING_SINGLE=11 +val SCE_INNO_IDENTIFIER=12 +# Lexical states for SCLEX_OPAL +lex Opal=SCLEX_OPAL SCE_OPAL_ +val SCE_OPAL_SPACE=0 +val SCE_OPAL_COMMENT_BLOCK=1 +val SCE_OPAL_COMMENT_LINE=2 +val SCE_OPAL_INTEGER=3 +val SCE_OPAL_KEYWORD=4 +val SCE_OPAL_SORT=5 +val SCE_OPAL_STRING=6 +val SCE_OPAL_PAR=7 +val SCE_OPAL_BOOL_CONST=8 +val SCE_OPAL_DEFAULT=32 +# Lexical states for SCLEX_SPICE +lex Spice=SCLEX_SPICE SCE_SPICE_ +val SCE_SPICE_DEFAULT=0 +val SCE_SPICE_IDENTIFIER=1 +val SCE_SPICE_KEYWORD=2 +val SCE_SPICE_KEYWORD2=3 +val SCE_SPICE_KEYWORD3=4 +val SCE_SPICE_NUMBER=5 +val SCE_SPICE_DELIMITER=6 +val SCE_SPICE_VALUE=7 +val SCE_SPICE_COMMENTLINE=8 +# Lexical states for SCLEX_CMAKE +lex CMAKE=SCLEX_CMAKE SCE_CMAKE_ +val SCE_CMAKE_DEFAULT=0 +val SCE_CMAKE_COMMENT=1 +val SCE_CMAKE_STRINGDQ=2 +val SCE_CMAKE_STRINGLQ=3 +val SCE_CMAKE_STRINGRQ=4 +val SCE_CMAKE_COMMANDS=5 +val SCE_CMAKE_PARAMETERS=6 +val SCE_CMAKE_VARIABLE=7 +val SCE_CMAKE_USERDEFINED=8 +val SCE_CMAKE_WHILEDEF=9 +val SCE_CMAKE_FOREACHDEF=10 +val SCE_CMAKE_IFDEFINEDEF=11 +val SCE_CMAKE_MACRODEF=12 +val SCE_CMAKE_STRINGVAR=13 +val SCE_CMAKE_NUMBER=14 +# Lexical states for SCLEX_GAP +lex Gap=SCLEX_GAP SCE_GAP_ +val SCE_GAP_DEFAULT=0 +val SCE_GAP_IDENTIFIER=1 +val SCE_GAP_KEYWORD=2 +val SCE_GAP_KEYWORD2=3 +val SCE_GAP_KEYWORD3=4 +val SCE_GAP_KEYWORD4=5 +val SCE_GAP_STRING=6 +val SCE_GAP_CHAR=7 +val SCE_GAP_OPERATOR=8 +val SCE_GAP_COMMENT=9 +val SCE_GAP_NUMBER=10 +val SCE_GAP_STRINGEOL=11 +# Lexical state for SCLEX_PLM +lex PLM=SCLEX_PLM SCE_PLM_ +val SCE_PLM_DEFAULT=0 +val SCE_PLM_COMMENT=1 +val SCE_PLM_STRING=2 +val SCE_PLM_NUMBER=3 +val SCE_PLM_IDENTIFIER=4 +val SCE_PLM_OPERATOR=5 +val SCE_PLM_CONTROL=6 +val SCE_PLM_KEYWORD=7 +# Lexical state for SCLEX_PROGRESS +lex Progress=SCLEX_PROGRESS SCE_4GL_ +val SCE_4GL_DEFAULT=0 +val SCE_4GL_NUMBER=1 +val SCE_4GL_WORD=2 +val SCE_4GL_STRING=3 +val SCE_4GL_CHARACTER=4 +val SCE_4GL_PREPROCESSOR=5 +val SCE_4GL_OPERATOR=6 +val SCE_4GL_IDENTIFIER=7 +val SCE_4GL_BLOCK=8 +val SCE_4GL_END=9 +val SCE_4GL_COMMENT1=10 +val SCE_4GL_COMMENT2=11 +val SCE_4GL_COMMENT3=12 +val SCE_4GL_COMMENT4=13 +val SCE_4GL_COMMENT5=14 +val SCE_4GL_COMMENT6=15 +val SCE_4GL_DEFAULT_=16 +val SCE_4GL_NUMBER_=17 +val SCE_4GL_WORD_=18 +val SCE_4GL_STRING_=19 +val SCE_4GL_CHARACTER_=20 +val SCE_4GL_PREPROCESSOR_=21 +val SCE_4GL_OPERATOR_=22 +val SCE_4GL_IDENTIFIER_=23 +val SCE_4GL_BLOCK_=24 +val SCE_4GL_END_=25 +val SCE_4GL_COMMENT1_=26 +val SCE_4GL_COMMENT2_=27 +val SCE_4GL_COMMENT3_=28 +val SCE_4GL_COMMENT4_=29 +val SCE_4GL_COMMENT5_=30 +val SCE_4GL_COMMENT6_=31 +# Lexical states for SCLEX_ABAQUS +lex ABAQUS=SCLEX_ABAQUS SCE_ABAQUS_ +val SCE_ABAQUS_DEFAULT=0 +val SCE_ABAQUS_COMMENT=1 +val SCE_ABAQUS_COMMENTBLOCK=2 +val SCE_ABAQUS_NUMBER=3 +val SCE_ABAQUS_STRING=4 +val SCE_ABAQUS_OPERATOR=5 +val SCE_ABAQUS_WORD=6 +val SCE_ABAQUS_PROCESSOR=7 +val SCE_ABAQUS_COMMAND=8 +val SCE_ABAQUS_SLASHCOMMAND=9 +val SCE_ABAQUS_STARCOMMAND=10 +val SCE_ABAQUS_ARGUMENT=11 +val SCE_ABAQUS_FUNCTION=12 +# Lexical states for SCLEX_ASYMPTOTE +lex Asymptote=SCLEX_ASYMPTOTE SCE_ASY_ +val SCE_ASY_DEFAULT=0 +val SCE_ASY_COMMENT=1 +val SCE_ASY_COMMENTLINE=2 +val SCE_ASY_NUMBER=3 +val SCE_ASY_WORD=4 +val SCE_ASY_STRING=5 +val SCE_ASY_CHARACTER=6 +val SCE_ASY_OPERATOR=7 +val SCE_ASY_IDENTIFIER=8 +val SCE_ASY_STRINGEOL=9 +val SCE_ASY_COMMENTLINEDOC=10 +val SCE_ASY_WORD2=11 +# Lexical states for SCLEX_R +lex R=SCLEX_R SCE_R_ +val SCE_R_DEFAULT=0 +val SCE_R_COMMENT=1 +val SCE_R_KWORD=2 +val SCE_R_BASEKWORD=3 +val SCE_R_OTHERKWORD=4 +val SCE_R_NUMBER=5 +val SCE_R_STRING=6 +val SCE_R_STRING2=7 +val SCE_R_OPERATOR=8 +val SCE_R_IDENTIFIER=9 +val SCE_R_INFIX=10 +val SCE_R_INFIXEOL=11 # Events @@ -1559,186 +3270,35 @@ evt void ModifyAttemptRO=2004(void) evt void Key=2005(int ch, int modifiers) evt void DoubleClick=2006(void) evt void UpdateUI=2007(void) -# The old name for SCN_UPDATEUI -val SCN_CHECKBRACE=2007 evt void Modified=2008(int position, int modificationType, string text, int length, int linesAdded, int line, int foldLevelNow, int foldLevelPrev) -# Optional module for macro recording evt void MacroRecord=2009(int message, int wParam, int lParam) evt void MarginClick=2010(int modifiers, int position, int margin) evt void NeedShown=2011(int position, int length) -evt void PosChanged=2012(int position) evt void Painted=2013(void) evt void UserListSelection=2014(int listType, string text) evt void URIDropped=2015(string text) evt void DwellStart=2016(int position) evt void DwellEnd=2017(int position) +evt void Zoom=2018(void) +evt void HotSpotClick=2019(int modifiers, int position) +evt void HotSpotDoubleClick=2020(int modifiers, int position) +evt void CallTipClick=2021(int position) +evt void AutoCSelection=2022(string text) +evt void IndicatorClick=2023(int modifiers, int position) +evt void IndicatorRelease=2024(int modifiers, int position) cat Deprecated -val SCFIND_DOWN=1 - -################################################ -# From WinDefs.h - -# ***** DEPRECATED from here to end of file ****** - -# Will a paste succeed? -fun bool EM_CanPaste=1074(,) - -# Are there any undoable actions in the undo history. -fun bool EM_CanUndo=198(,) - -# Find the position and line from a point within the window. -fun int EM_CharFromPos=215(,point pt) - -# Delete the undo history. -fun void EM_EmptyUndoBuffer=205(,) - -# Retrieve the selection range. -fun void EM_ExGetSel=1076(,charrangeresult cr) - -# Retrieve the line number of a position in the document. -get int EM_ExLineFromChar=1078(,position pos) - -# Select a range of text. -fun void EM_ExSetSel=1079(,charrange cr) - -# Find some text in the document. -fun position EM_FindText=1080(int flags, findtext ft) - -# Find some text in the document. Returns range of found text in ft argument. -fun position EM_FindTextEx=1103(int flags, findtextex ft) - -# On Windows will draw the document into a display context such as a printer. -fun void EM_FormatRange=1081(bool draw, formatrange fr) - -# Retrieve the line at the top of the display. -get int EM_GetFirstVisibleLine=206(,) - -# Retrieve the contents of a line. -# Returns the length of the line. -fun int EM_GetLine=196(int line, countedstring text) - -# Returns the number of lines in the document. There is always at least one. -fun int EM_GetLineCount=186(,) - -# Returns the size in pixels of left and right margins packed into one integer. -# The left margin is in the low half and the right margin in the high half. -fun int EM_GetMargins=212(,) - -# Is the document different from when it was last saved? -get bool EM_GetModify=184(,) - -# Get the area used to display the document. -fun void EM_GetRect=178(,rectangle r) - -# Return the selection packed into one integer with the start of the selection -# in the low half and the end in the high half. -fun int EM_GetSel=176(,) - -# Retrieve the selected text. -# Return the length of the text. -fun int EM_GetSelText=1086(,stringresult text) - -# Retrieve a range of text. -# Return the length of the text. -fun int EM_GetTextRange=1099(, textrange tr) - -# Draw the selection in normal style or with selection highlighted. -fun void EM_HideSelection=1087(bool normal,) - -# Retrieve the line of a position. -fun int EM_LineFromChar=201(position pos,) - -# Retrieve the position at the start of a line. -fun position EM_LineIndex=187(int line,) - -# Retrieve the number of characters on a line not including end of line characters. -fun int EM_LineLength=193(int line,) - -# Scroll horizontally and vertically. -fun void EM_LineScroll=182(int columns, int lines) - -# Retrieve the point in the window where a position is displayed. -fun void EM_PosFromChar=214(pointresult pt, position pos) - -# Replace the selected text with the argument text. -fun void EM_ReplaceSel=194(, string text) - -# Ensure the caret is visible. -fun void EM_ScrollCaret=183(,) - -# Returns SEL_EMPTY if selection contains no characters, otherwise SEL_TEXT. -fun void EM_SelectionType=1090(,) - -# Set the width of the left and right margins -fun void EM_SetMargins=211(int flags, int values) - -# Set to read only or read write. -set void EM_SetReadOnly=207(bool readOnly,) - -# Select the range of text from start to end. -fun void EM_SetSel=177(position start, position end) - -# Undo one action in the undo history. -fun void EM_Undo=199(,) - -# Null operation. -fun void WM_Null=0(,) - -# Clear the selection. -fun void WM_Clear=771(,) - -fun void WM_Command=273(,) - -# Copy the selection to the clipboard. -fun void WM_Copy=769(,) - -# Cut the selection to the clipboard. -fun void WM_Cut=768(,) - -# Retrieve all the text in the document. -# Returns number of characters retrieved. -fun int WM_GetText=13(int length, stringresult text) - -# Retrieve the number of characters in the document. -fun int WM_GetTextLength=14(,) - -# Notification back to container -fun void WM_Notify=78(int id, int stuff) - -# Paste the contents of the clipboard into the document replacing the selection. -fun void WM_Paste=770(,) +# CARET_POLICY changed in 1.47 +fun void SetCaretPolicy=2369(int caretPolicy, int caretSlop) +val CARET_CENTER=0x02 +val CARET_XEVEN=0x08 +val CARET_XJUMPS=0x10 -# Replace the contents of the document with the argument text. -fun void WM_SetText=12(, string text) +# The old name for SCN_UPDATEUI +val SCN_CHECKBRACE=2007 +evt void PosChanged=2012(int position) -# Undo one action in the undo history. -fun void WM_Undo=772(,) - -# Notification codes -val EN_CHANGE=768 -val EN_KILLFOCUS=512 -val EN_SETFOCUS=256 - -# Flags for setting margins. -val EC_LEFTMARGIN=1 -val EC_RIGHTMARGIN=2 -val EC_USEFONTINFO=0xffff - -# Selection type. -val SEL_EMPTY=0 -val SEL_TEXT=1 - -# Find replace mask constants -val FR_MATCHCASE=0x4 -val FR_WHOLEWORD=0x2 -val FR_DOWN=0x1 - -# Key modifier flag. -val SHIFT_PRESSED=1 -val LEFT_CTRL_PRESSED=2 -val LEFT_ALT_PRESSED=4 - -#events -evt void EN_Change=768(void) +# SCLEX_HTML should be used in preference to these. +val SCLEX_ASP=29 +val SCLEX_PHP=30