X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/6495f2dd5d718b9daea8c5fc37858299111d8496..65baafba0e8cd74f2264b7e2f7625ff5bea84864:/docs/gtk/install.txt diff --git a/docs/gtk/install.txt b/docs/gtk/install.txt index ab54619608..7f0b1c8342 100644 --- a/docs/gtk/install.txt +++ b/docs/gtk/install.txt @@ -1,47 +1,58 @@ +wxWidgets 2.6 for GTK+ installation +----------------------------------- - !!! When sending bug reports tell us what version of wxWindows you are - using (including the beta) and what compiler on what system. One - example: wxGTK 2.3.0, egcs 1.1.1, Redhat 6.2 !!! +IMPORTANT NOTE: -* The most simple case ------------------------ + If you experience problems installing, please re-read these + instructions and other related files (todo.txt, bugs.txt and + osname.txt for your platform if it exists) carefully before + mailing wxwin-users or the author. Preferably, try to fix the + problem first and then send a patch to the author. -If you compile wxWindows on Linux for the first time and don't like to read -install instructions just do (in the base dir): + When sending bug reports tell us what version of wxWidgets you are + using (including the beta) and what compiler on what system. One + example: wxGTK 2.6.2, gcc 2.95.4, Redhat 6.2 -> ./configure --with-gtk -> make -> su -> make install -> ldconfig -> exit +* The simplest case +------------------- -Afterwards you can continue with +If you compile wxWidgets on Linux for the first time and don't like to read +install instructions just do (in the base dir): +> mkdir buildgtk +> cd buildgtk +> ../configure --with-gtk > make > su > make install > ldconfig -> exit +[if you get "ldconfig: command not found", try using "/sbin/ldconfig"] -If you want to remove wxWindows on Unix you can do this: +If you don't do the 'make install' part, you can still use the libraries from +the buildgtk directory, but they may not be available to other users. + +If you want to remove wxWidgets on Unix you can do this: > su > make uninstall > ldconfig -> exit + +Note that by default, GTK+ 2.X is used. GTK+ 1.2 can be specified +with --with-gtk=1. * The expert case ----------------- -If you want to do some more serious cross-platform programming with wxWindows, -such as for GTK and Motif, you can now build two complete libraries and use -them concurretly. For this end, you have to create a directory for each build -of wxWindows - you may also want to create different versions of wxWindows -and test them concurrently. Most typically, this would be a version configured -with --enable-debug_flag and one without. Note, that only one build can currently -be installed, so you'd have to use local version of the library for that purpose. -For building three versions (one GTK, one Motif and a debug version of the GTK +If you want to do some more serious cross-platform programming with wxWidgets, +such as for GTK+ and Motif, you can now build two complete libraries and use +them concurrently. To do this, create a separate directory for each build +of wxWidgets - you may also want to create different versions of wxWidgets +and test them concurrently. Most typically, this would be a version configured +with --enable-debug and one without. Note, that only one build can +currently be installed with 'make install', so you'd have to use local version of +the library for that purpose. + +For building three versions (one GTK+, one Motif and a debug version of the GTK source) you'd do this: md buildmotif @@ -58,183 +69,164 @@ cd .. md buildgtkd cd buildgtkd -../configure --with-gtk --enable-debug_flag +../configure --with-gtk --enable-debug make cd .. -* The most simple errors ------------------------- - -configure reports, that you don't have GTK 1.2 installed although you are -very sure you have. Well, you have installed it, but you also have another -version of the GTK installed, which you may need to remove including other -versions of glib (and its headers). Also, look for the PATH variable and check -if it includes the path to the correct gtk-config! The check your LDPATH if it -points to the correct library. There is no way to compile wxGTK if configure -doesn't pass this test as all this test does is compile and link a GTK program. - -You get errors during compilation: The reason is that you probably have a broken -compiler, which includes almost everything that is called gcc. If you use gcc 2.8 -you have to disable optimsation as the compiler will give up with an internal -compiler error. - -If there is just any way for you to use egcs, use egcs. We cannot fix gcc. - -You get immediate segfault when starting any sample or application: This is either -due to having compiled the library with different flags or options than your program - -typically you might have the __WXDEBUG__ option set for the library but not for your -program - or due to using a broken compiler (and its optimisation) such as GCC 2.8. - -* The most simple program -------------------------- - -Now create your super-application myfoo.app and compile anywhere with - -gcc myfoo.cpp `wx-config --libs --cflags` -o myfoo - -* General ------------------------ - -The Unix variants of wxWindows use GNU configure. If you have problems with your -make use GNU make instead. +* The simplest errors +--------------------- + +For any configure errors: please look at config.log file which was generated +during configure run, it usually contains some useful information. + +configure reports, that you don't have GTK+ 1.2 installed although you are +very sure you have. Well, you have installed it, but you also have another +version of the GTK+ installed, which you may need to remove including other +versions of glib (and its headers). Or maybe you installed it in non default +location and configure can't find it there, so please check that your PATH +variable includes the path to the correct gtk-config. Also check that your +LD_LIBRARY_PATH or equivalent variable contains the path to GTK+ libraries if +they were installed in a non default location. + +You get errors from make: please use GNU make instead of the native make +program. Currently wxWidgets can be built only with GNU make, BSD make and +Solaris make. Other versions might work or not (any which don't have VPATH +support definitely won't). + +You get errors during compilation: The reason is that you probably have a +broken compiler. GCC 2.8 and earlier versions and egcs are likely to cause +problems due to incomplete support for C++ and optimisation bugs. Best to use +GCC 2.95 or later. + +You get immediate segfault when starting any sample or application: This is +either due to having compiled the library with different flags or options than +your program - typically you might have the __WXDEBUG__ option set for the +library but not for your program - or due to using a compiler with optimisation +bugs. + +Linker complains about missing PROIO_yy_flex_alloc and similar symbols: you +probably have an old version of flex, 2.5.4 is recommended. + +* The simplest program +---------------------- -If you have general problems with installation, read my homepage at +Now create your super-application myfoo.cpp and compile anywhere with - http://wesley.informatik.uni-freiburg.de/~wxxt - -for newest information. If you still don't have any success, please send a bug -report to one of our mailing lists (see my homepage) INCLUDING A DESCRIPTION OF -YOUR SYSTEM AND YOUR PROBLEM, SUCH AS YOUR VERSION OF GTK, WXGTK, WHAT DISTRIBUTION -YOU USE AND WHAT ERROR WAS REPORTED. I know this has no effect, but I tried... +g++ myfoo.cpp `wx-config --libs --cxxflags` -o myfoo * GUI libraries ------------------------ +--------------- -wxWindows/GTK requires the GTK+ library to be installed on your system. It has to -be a stable version, preferebly version 1.2.3. +wxWidgets/GTK+ requires the GTK+ library to be installed on your system. It has +to be a stable version, preferably version 1.2.10 (at least 1.2.3 is required, +1.2.7 is strongly recommended). -You can get the newest version of the GTK+ from the GTK homepage at: +You can get the newest version of the GTK+ from the GTK+ homepage at: http://www.gtk.org - -We also mirror GTK+ 1.2.3 at my ftp site. You'll find information about downloading + +We also mirror GTK+ at my ftp site. You'll find information about downloading at my homepage. - + * Additional libraries ------------------------ +---------------------- -wxWindows/Gtk requires a thread library and X libraries known to work with threads. -This is the case on all commercial Unix-Variants and all Linux-Versions that are -based on glibc 2 except RedHat 5.0 which is broken in many aspects. As of writing -this, these Linux distributions have correct glibc 2 support: +wxWidgets/Gtk requires a thread library and X libraries known to work with +threads. This is the case on all commercial Unix-Variants and all +Linux-Versions that are based on glibc 2 except RedHat 5.0 which is broken in +many aspects. As of writing this, virtually all Linux distributions have +correct glibc 2 support. - - RedHat 5.1 - - Debian 2.0 - - Stampede - - DLD 6.0 - - SuSE 6.0 - -You can disable thread support by running +You can disable thread support by running -./configure "--disable-threads" +./configure --disable-threads make su make install ldconfig exit - -NB: DO NOT COMPILE WXGTK WITH GCC 2.7 AND THREADS, SINCE ALL PROGRAMS WILL CRASH UPON -START-UP! Just always use egcs and be happy. * Building wxGTK on OS/2 --------------------------- +------------------------ Please send comments and question about the OS/2 installation -to Andrea Venturoli and patches to -the wxWindows mailing list. +to Stefan Neis and patches to +the wxWidgets mailing list. -You'll need OS/2 Warp (4.00FP#6), X-Free86/2 (3.3.3 or newer), -GTK+ (1.2.5 or newer), emx (0.9d fix 1), flex (2.5.4), yacc (1.8), -korn shell (5.2.13), Autoconf (2.13), GNU file utilities (3.6), -GNU text utilities (1.3), GNU shell utilites (1.12), m4 (1.4), -sed (2.05), grep (2.0), Awk (3.0.3), GNU Make (3.76.1). +In the following list, the version numbers indicate the configuration that +was actually used by myself, newer version should cause no problems and +even older ones are expected to work most of the time. -Open an OS/2 prompt and switch to the directory above. -First set some global environment variables we need: - -SET CXXFLAGS=-Zmtd -D__ST_MT_ERRNO__ -SET CFLAGS=-Zmtd -D__ST_MT_ERRNO__ -SET OSTYPE=OS2X -SET COMSPEC=sh +You'll need OS/2 Warp (4.51) or eCS(1.0), X-Free86/2 (3.3.6 or newer), +GTK+ (1.2.5 or newer), emx (0.9d fix 4), flex (2.5.4), yacc (1.8) or +bison (1.25), a Unix like shell (pdksh-5.2.14 or ash), Autoconf (2.57), +GNU file utilities (3.13), GNU text utilities (1.19), +GNU shell utilites (1.12), m4 (1.4), sed (2.05), grep (2.0), Awk (3.0.3), +GNU Make (3.75). -Notice you can choose whatever you want, if you don't like OS2X. +Preferably, you should have Posix/2 installed and C(PLUS)_INCLUDE_PATH and +LIBRARY_PATH set up accordingly, however, wxGTK will even work without it. +Presence of Posix/2 will be auto-detected. -Now, run autoconf in the main directory and in the samples, demos -and utils subdirectory. This will generate the OS/2 specific -versions of the configure scripts. Now run - configure --with-gtk -as described above. +Open an OS/2 prompt and switch to the directory above. +Set MAKESHELL (and depending on your installation also INSTALL, for me +it tends to try to use the system's tcpip\pcomos\install.exe which causes +problems...) to a Unix like shell, e.g. +SET MAKESHELL=ash -If you have pthreads library installed, but have a gtk version -which does not yet support threading, you need to explicitly -diable threading by using the option --disable-threads. +Be warned that depending on the precise version of your make, the +variable that needs to be set might be MAKE_SHELL instead of MAKESHELL. +If you have a really deficient version of GNU make, it might even be +necessary to set SHELL or even COMSPEC to a unix like shell as well. -Note that configure assumes your flex will generate files named -"lexyy.c", not "lex.yy.c". If you have a version which does -generate "lex.yy.c", you need to manually change the generated -makefile. +Notice that the delivered configure scripts are fully OS/2 aware, so you +can simply run + ash -c "configure --with-gtk" +and make and possibly make install as described above. * Building wxGTK on SGI --------------------------- +----------------------- Using the SGI native compilers, it is recommended that you -also set CFLAGS and CXXFLAGS before running configure. These +also set CFLAGS and CXXFLAGS before running configure. These should be set to : -CFLAGS="-mips3 -n32" +CFLAGS="-mips3 -n32" CXXFLAGS="-mips3 -n32" -This is essential if you want to use the resultant binaries -on any other machine than the one it was compiled on. If you -have a 64bit machine (Octane) you should also do this to ensure -you don't accidently build the libraries as 64bit (which is +This is essential if you want to use the resultant binaries +on any other machine than the one it was compiled on. If you +have a 64bit machine (Octane) you should also do this to ensure +you don't accidently build the libraries as 64bit (which is untested). The SGI native compiler support has only been tested on Irix 6.5. * Create your configuration ------------------------------ +--------------------------- Usage: - ./configure options + ./configure options If you want to use system's C and C++ compiler, set environment variables CC and CCC as - % setenv CC cc - % setenv CCC CC - % ./configure options + % setenv CC cc + % setenv CXX CC + % ./configure [options] to see all the options please use: - ./configure --help + ./configure --help -The basic philosophy is that if you want to use different -configurations, like a debug and a release version, -or use the same source tree on different systems, -you have only to change the environment variable OSTYPE. -(Sadly this variable is not set by default on some systems -in some shells - on SGI's for example). So you will have to -set it there. This variable HAS to be set before starting -configure, so that it knows which system it tries to -configure for. - -Configure will complain if the system variable OSTYPE has -not been defined. And Make in some circumstances as well... +It is recommended to build wxWidgets in another directory (maybe a +subdirectory of your wxWidgets installation) as this allows you to +have multiple configurations (for example, debug and release or GTK +and Motif) simultaneously. * General options -------------------- +----------------- Given below are the commands to change the default behaviour, i.e. if it says "--disable-threads" it means that threads @@ -242,154 +234,173 @@ are enabled by default. Normally, you won't have to choose a toolkit, because when you download wxGTK, it will default to --with-gtk etc. But -if you use all of our CVS repository you have to choose a +if you use all of our CVS repository you have to choose a toolkit. You must do this by running configure with either of: - --without-gtk Don't use the GIMP ToolKit (GTK) - - --with-motif Use either Motif or Lesstif - Configure will look for both. + --with-gtk=2 Use the GTK+ 2.0. Default. + --with-gtk=1 Use the GTK+ 1.2. + --with-motif Use either Motif or Lesstif + Configure will look for both. The following options handle the kind of library you want to build. - --disable-threads Compile without thread support. - - --disable-shared Do not create shared libraries. - - --enable-static Create static libraries. - - --disable-optimise Do not optimise the code. Can - sometimes be useful for debugging - and is required on some architectures - such as Sun with gcc 2.8.X which - would otherwise produce segvs. - - --enable-profile Add profiling info to the object - files. Currently broken, I think. - - --enable-no_rtti Enable compilation without creation of - C++ RTTI information in object files. - This will speed-up compilation and reduce - binary size. - - --enable-no_exceptions Enable compilation without creation of - C++ exception information in object files. - This will speed-up compilation and reduce - binary size. Also fewer crashes during the - actual compilation... - - --enable-no_deps Enable compilation without creation of - dependency information. - - --enable-permissive Enable compilation without creation of - giving erros as soon as you compile with - Solaris' ANSI-defying headers. - - --enable-mem_tracing Add built-in memory tracing. - - --enable-dmalloc Use the dmalloc memory debugger. - Read more at www.letters.com/dmalloc/ - - --enable-debug_info Add debug info to object files and - executables for use with debuggers - such as gdb (or its many frontends). - - --enable-debug_flag Define __DEBUG__ and __WXDEBUG__ when - compiling. This enable wxWindows' very - useful internal debugging tricks (such - as automatically reporting illegal calls) - to work. Note that program and library - must be compiled with the same debug - options. + --disable-threads Compile without thread support. + + --disable-shared Do not create shared libraries, but + build static libraries instead. + + --enable-monolithic Build wxWidgets as single library instead + of as several smaller libraries (which is + the default since wxWidgets 2.5.0). + + --disable-optimise Do not optimise the code. Can + sometimes be useful for debugging + and is required on some architectures + such as Sun with gcc 2.8.X which + would otherwise produce segvs. + + --enable-unicode Enable Unicode support. + + --enable-profile Add profiling info to the object + files. Currently broken, I think. + + --enable-no_rtti Enable compilation without creation of + C++ RTTI information in object files. + This will speed-up compilation and reduce + binary size. + + --enable-no_exceptions Enable compilation without creation of + C++ exception information in object files. + This will speed-up compilation and reduce + binary size. Also fewer crashes during the + actual compilation... + + --enable-no_deps Enable compilation without creation of + dependency information. + + --enable-permissive Enable compilation without checking for strict + ANSI conformance. Useful to prevent the build + dying with errors as soon as you compile with + Solaris' ANSI-defying headers. + + --enable-mem_tracing Add built-in memory tracing. + + --enable-dmalloc Use the dmalloc memory debugger. + Read more at www.letters.com/dmalloc/ + + --enable-debug_info Add debug info to object files and + executables for use with debuggers + such as gdb (or its many frontends). + + --enable-debug_flag Define __DEBUG__ and __WXDEBUG__ when + compiling. This enable wxWidgets' very + useful internal debugging tricks (such + as automatically reporting illegal calls) + to work. Note that program and library + must be compiled with the same debug + options. + + --enable-debug Same as --enable-debug_info and + --enable-debug_flag together. Unless you have + some very specific needs, you should use this + option instead of --enable-debug_info/flag ones + separately. * Feature Options -------------------- +----------------- When producing an executable that is linked statically with wxGTK you'll be surprised at its immense size. This can sometimes be -drastically reduced by removing features from wxWindows that +drastically reduced by removing features from wxWidgets that are not used in your program. The most relevant such features are - --with-odbc Enables ODBC code. This is disabled + --with-odbc Enables ODBC code. This is disabled by default because iODBC is under the - L-GPL license. - - --without-libpng Disables PNG image format code. - - --without-libjpeg Disables JPEG image format code. - - --without-libtiff Disables TIFF image format code. - - --disable-pnm Disables PNM image format code. - - --disable-gif Disables GIF image format code. - - --disable-pcx Disables PCX image format code. - - --disable-resources Disables the use of *.wxr type - resources. - - --disable-threads Disables threads. Will also - disable sockets. - - --disable-sockets Disables sockets. - - --disable-dnd Disables Drag'n'Drop. - - --disable-clipboard Disables Clipboard. - - --disable-serial Disables object instance serialiasation. - - --disable-streams Disables the wxStream classes. - - --disable-file Disables the wxFile class. - - --disable-textfile Disables the wxTextFile class. - - --disable-intl Disables the internationalisation. - - --disable-validators Disables validators. - - --disable-accel Disables accel. - + L-GPL license which is less liberal than + wxWidgets license. + + --without-libpng Disables PNG image format code. + + --without-libjpeg Disables JPEG image format code. + + --without-libtiff Disables TIFF image format code. + + --without-expat Disable XML classes based on Expat parser. + + --disable-pnm Disables PNM image format code. + + --disable-gif Disables GIF image format code. + + --disable-pcx Disables PCX image format code. + + --disable-iff Disables IFF image format code. + + --disable-resources Disables the use of *.wxr type resources. + + --disable-threads Disables threads. Will also disable sockets. + + --disable-sockets Disables sockets. + + --disable-dnd Disables Drag'n'Drop. + + --disable-clipboard Disables Clipboard. + + --disable-serial Disables object instance serialisation. + + --disable-streams Disables the wxStream classes. + + --disable-file Disables the wxFile class. + + --disable-textfile Disables the wxTextFile class. + + --disable-intl Disables the internationalisation. + + --disable-validators Disables validators. + + --disable-accel Disables accelerators support. + Apart from disabling certain features you can very often "strip" the program of its debugging information resulting in a significant reduction in size. +Please see the output of "./configure --help" for comprehensive list +of all configurable options. + + * Compiling -------------- +----------- The following must be done in the base directory (e.g. ~/wxGTK or ~/wxWin or whatever) -Now the makefiles are created (by configure) and you can compile +Now the makefiles are created (by configure) and you can compile the library by typing: - make + make make yourself some coffee, as it will take some time. On an old -386SX possibly two weeks. During compilation, you'll get a few +386SX possibly two weeks. During compilation, you'll get a few warning messages depending in your compiler. If you want to be more selective, you can change into a specific -directiry and type "make" there. +directory and type "make" there. -Then you may install the library and it's header files under +Then you may install the library and its header files under /usr/local/include/wx and /usr/local/lib respectively. You have to log in as root (i.e. run "su" and enter the root password) and type - make install + make install -You can remove any traces of wxWindows by typing +You can remove any traces of wxWidgets by typing make uninstall - + If you want to save disk space by removing unnecessary object-files: - make clean +make clean in the various directories will do the work for you. @@ -399,7 +410,7 @@ in the various directories will do the work for you. 1) The first way uses the installed libraries and header files automatically using wx-config -gcc myfoo.cpp `wx-config --cflags --libs` -o myfoo +g++ myfoo.cpp `wx-config --cxxflags --libs` -o myfoo Using this way, a make file for the minimal sample would look like this @@ -407,19 +418,22 @@ like this CC = gcc minimal: minimal.o - $(CC) -o minimal minimal.o `wx-config --libs` + $(CC) -o minimal minimal.o `wx-config --libs` minimal.o: minimal.cpp mondrian.xpm - $(CC) `wx-config --cflags` -c minimal.cpp -o minimal.o + $(CC) `wx-config --cxxflags` -c minimal.cpp -o minimal.o -clean: +clean: rm -f *.o minimal -This is certain to become the standard way unless we decide -to sitch to tmake. +If your application uses only some of wxWidgets libraries, you can +specify required libraries when running wx-config. For example, +`wx-config --libs=html,core` will only output link command to link +with libraries required by core GUI classes and wxHTML classes. See +the manual for more information on the libraries. -2) The other way creates a project within the source code -directories of wxWindows. For this endeavour, you'll need +2) The other way creates a project within the source code +directories of wxWidgets. For this endeavour, you'll need GNU autoconf version 2.14 and add an entry to your Makefile.in to the bottom of the configure.in script and run autoconf and configure before you can type make.