X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/59455c67d444c12f6d6a59e0c16528554c8b4c30..d8dd53b239aa76efe99e7ce9e441f9954e1b84b7:/wxPython/distrib/wxPythonFull.spec.in?ds=sidebyside diff --git a/wxPython/distrib/wxPythonFull.spec.in b/wxPython/distrib/wxPythonFull.spec.in index 32ab340a9e..8d86737c7a 100644 --- a/wxPython/distrib/wxPythonFull.spec.in +++ b/wxPython/distrib/wxPythonFull.spec.in @@ -1,116 +1,231 @@ -%define pref %{_prefix} -%define python @PYTHON@ -%define pyver @PYVER@ -%define port @PORT@ -%define lcport @LCPORT@ -%define unicode @UNICODE@ -%define tarname @TARNAME@ -%define version @VERSION@ -%define ver2 @VER2@ -%define release 1 -%define wxprefbase %{pref}/lib/wxPython -%define wxpref %{wxprefbase}-%{version} -%define name wxPython%{port}-py%{pyver} +#---------------------------------------------------------------------- +# Name: wxPython.spec +# Purpose: RPM Build and packaging instructions +# +# Author: Robin Dunn +# +# RCS-ID: $Id$ +# Copyright: (c) 2004 by Total Control Software +# Licence: wxWindows license +#---------------------------------------------------------------------- + + +# The following values can be set on the rpmbuild command line with +# --define 'name VALUE' If no value is set on the command line then +# the default value set here will be used instead. + + +# Which version of Python to build with. Used to assemble python +# binary name so use '2.3', '2.4', etc. +%if %{?pyver:0}%{!?pyver:1} +%define pyver 2.4 +%endif + + +# Which wxWidgets port to build and use. Current acceptable values +# are 'gtk' and 'gtk2'. +%if %{?port:0}%{!?port:1} +%define port gtk2 +%endif + + +# Build in unicode mode? Can only be used if port is gtk2, acceptable +# values are '0' and '1' +%if %{?unicode:0}%{!?unicode:1} +%define unicode 1 +%endif # Should the builtin image and etc. libs be used, or system libs? # Distro specific RPMs should probably set this to 0, generic ones -# should use 1 -%define builtin_libs 1 +# should use 1. +# NOTE: I'm trying 0 for this next release to see if I can get rid of +# this... +%if %{?builtin_libs:0}%{!?builtin_libs:1} +%define builtin_libs 0 +%endif # Should --enable-debug_flag be used in release builds? Using it # defines __WXDEBUG__ and gives us runtime diagnostics that are turned -# into Python exceptions starting with 2.3.4. (So turning it on is a -# very helpful thing IMO and is recommended.) +# into Python exceptions. (So turning it on is a very helpful thing +# IMO and is recommended.) The code is still compiled with +# optimization flags and and without debug info and such when this +# option is used, it simply turns on some extra code. +%if %{?debug_flag:0}%{!?debug_flag:1} %define debug_flag 1 +%endif -# build the name of the real wx-config from the port, flags, etc. -%define dbgflg %(if [ "%{debug_flag}" = "1" ]; then echo d; fi) -%define uniflg %(if [ "%{unicode}" = "1" ]; then echo u; fi) -%define DBGFLG %(if [ "%{debug_flag}" = "1" ]; then echo D; fi) -%define UNIFLG %(if [ "%{unicode}" = "1" ]; then echo U; fi) -%define wxconfigname %{wxpref}/bin/wx%{lcport}%{uniflg}%{dbgflg}-%{ver2}-config +# Used to set the Release tag below. I normally use it to define what +# distro the RPM was built on and also include the version of Python +# it was built with. +%if %{?release:0}%{!?release:1} +%define release 1_py%{pyver} +%endif + -# turn off the generation of debuginfo rpm (RH9) +# This one is used to control whether the full 4 components of the +# verseion number are used in the site-packages subdirectory name. By +# default only 2 or 3 components (depending on stable/unstable status) +# are used. +%if %{?fullver:0}%{!?fullver:1} +%define fullver 0 +%endif + + +# Whether to add --enable-mediactrl to the wxWidgets configure. For +# some older versions of gstreamer-0.8 it currently incorerctly allows +# its use eventhough there is a compatibility problem that causes a +# failed compile. +%if %{?mediactrl:0}%{!?mediactrl:1} +%define mediactrl 1 +%endif + + +#---------------------------------------------------------------------- +# Other variables used below + +%define pref %{_prefix} +%define python /usr/bin/python%{pyver} +%define tarname @TARNAME@ +%define version @VERSION@ +%define ver2 @VER2@ + +%define chartype %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi) +%define gtktype %(if [ "%{port}" = "gtk2" ]; then echo 2; fi) +%define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi) + +%define wxprefbase %{pref}/lib/wxPython +%define wxpref %{wxprefbase}-%{version}-%{port}-%{chartype} +%define pkgname wxPython + +# turn off the generation of debuginfo rpm (RH9) ?? %define debug_package %{nil} -#---------------------------------------------------------------- -Summary: Cross platform GUI toolkit for Python using wx%{port} -Name: %{name} + +#---------------------------------------------------------------------- +# Package definition +#---------------------------------------------------------------------- +Name: %{pkgname}%{ver2} +Summary: Cross platform GUI toolkit for Python Version: %{version} Release: %{release} -Source0: %{tarname}-%{version}.tar.gz -License: wxWindows Library Licence, Version 3 +Source0: %{tarname}-%{version}.tar.bz2 +License: wx Library Licence, Version 3 URL: http://wxPython.org/ Packager: Robin Dunn Group: Development/Python -BuildRoot: %{_tmppath}/%{name}-buildroot +BuildRoot: %{_tmppath}/%{pkgname}-buildroot Prefix: %{pref} -Provides: wxPython = %{version} -Provides: wxPython%{port} = %{version} +%description +Cross platform GUI toolkit for Python + -# Provides: libwx_%{lcport}%{uniflg}%{dbgflg}-%{ver2}.so -# Provides: libwx_%{lcport}%{uniflg}%{dbgflg}-%{ver2}.so(WX%{port}%{UNIFLG}%{DBGFLG}_%{ver2}) -# Provides: libwx_%{lcport}%{uniflg}%{dbgflg}_gl-%{ver2}.so -# Provides: libwx_%{lcport}%{uniflg}%{dbgflg}_gl-%{ver2}.so(WX%{port}%{UNIFLG}%{DBGFLG}_%{ver2}) -# old wxPython packages -Obsoletes: wxPython wxPython%{port} +%package -n %{pkgname}%{ver2}-%{port}-%{chartype} +Summary: Cross platform GUI toolkit for Python +Group: Development/Python +Requires: %{pkgname}-common +Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}, wxPythonGTK%{gtktype} +Provides: wxPython -%description -wxPython is a GUI toolkit for Python that is a wrapper around the -wxWindows C++ GUI library. wxPython provides a large variety of -window types and controls, all implemented with a native look and feel -(and native runtime speed) on the platforms it is supported on. +%description -n %{pkgname}%{ver2}-%{port}-%{chartype} +wxPython is a GUI toolkit for the Python programming language. It +allows Python programmers to create programs with a robust, highly +functional graphical user interface, simply and easily. It is +implemented as a Python extension module (native code) that wraps the +popular wxWidgets cross platform GUI library, which is written in C++. -This package is implemented using the %{port} port of wxWindows, and -includes the wx%{port} shared libs and etc. +wxPython is a cross-platform toolkit. The same program will usually +run on multiple platforms without modification. Currently supported +platforms are 32-bit Microsoft Windows, most Unix or unix-like +systems, and Macintosh OS X. +This package contains the wxPython runtime files built for the +wxWidgets %{port} port with %{chartype} character type. -%package -n wxPython%{port}-devel -Summary: wxPython%{port} development files -Group: Development/Libraries -Requires: wxPython%{port} = %{version} -%description -n wxPython%{port}-devel + + +%package -n %{pkgname}-common-%{port}-%{chartype} +Summary: Common files for needed by all wxPython runtimes +Group: Development/Python +Provides: %{pkgname}-common + +# They obsolete each other so any of them can be installed over another +# without conflicts +Obsoletes: %{pkgname}-common-gtk-ansi +Obsoletes: %{pkgname}-common-gtk2-ansi +Obsoletes: %{pkgname}-common-gtk2-unicode + +%description -n %{pkgname}-common-%{port}-%{chartype} +This package contains the common files needed by any version of the +wxPython runtime. This pacakge also installs a wx.pth file which will +determine which of the installed runtimes is the default version of +wxPython that is imported automatically with a bare "import wx". + + + + + +%package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype} +Summary: wxPython development files +Group: Development/Libraries +Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version} + +%description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype} This packages contains the headers and etc. for building apps or -Python extension modules that use the same wx%{port} shared libraries +Python extension modules that use the same wxWidgets shared libraries that wxPython uses. -#---------------------------------------------------------------- + + +#---------------------------------------------------------------------- %prep %setup -q -n %{tarname}-%{version} -#---------------------------------------------------------------- +#---------------------------------------------------------------------- %build WXDIR=`pwd` + +# Configure and build wxWidgets mkdir bld cd bld - -# Configure, trying to reduce external dependencies -../configure --with-%{lcport} \ +../configure \ +%if %{using_gtk1} + --with-gtk=1 \ +%else + --with-gtk=2 \ +%endif --prefix=%{wxpref} \ - --disable-soname \ --disable-monolithic \ - --enable-rpath=%{wxpref}/lib \ + --disable-rpath \ --with-opengl \ + --with-gnomeprint \ + --enable-geometry \ + --enable-graphics_ctx \ + --enable-optimise \ + --enable-sound --with-sdl \ +%if %{mediactrl} + --enable-mediactrl \ +%endif + --enable-display \ %if %{unicode} - --enable-gtk2 \ --enable-unicode \ +%else + --disable-unicode \ %endif - --enable-geometry \ - --enable-optimise \ %if %{debug_flag} --enable-debug_flag \ %endif + --disable-debugreport \ %if %{builtin_libs} --with-libjpeg=builtin \ --with-libpng=builtin \ @@ -119,86 +234,58 @@ cd bld %endif -# Build wxWindows and some contrib libs make make -C contrib/src/gizmos -make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0" make -C contrib/src/stc -make -C contrib/src/xrc - -# Install wxWindows and the contribs so the wxPython build can find -# all the headers it needs -make prefix=$RPM_BUILD_ROOT%{wxpref} install -make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install -make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0" prefix=$RPM_BUILD_ROOT%{wxpref} install -make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install -make -C contrib/src/xrc prefix=$RPM_BUILD_ROOT%{wxpref} install -# Now build wxPython +# Build wxPython cd $WXDIR/wxPython %{python} setup.py \ - NO_SCRIPTS=1 \ - WXPORT=%{lcport} \ + WXPORT=%{port} \ UNICODE=%{unicode} \ - WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \ + EP_ADD_OPTS=1 \ + EP_FULL_VER=%{fullver} \ + NO_SCRIPTS=1 \ + WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \ + build_ext --rpath=%{wxpref}/lib \ build -## $WXDIR/bld/wx-config --prefix=$WXDIR --exec-prefix=$WXDIR/bld" - -# Build wxrc (XRC resource tool) -cd $WXDIR/bld/contrib/utils/wxrc -make -strip wxrc - - -# install wxPython -cd $WXDIR/wxPython -%{python} setup.py \ - NO_SCRIPTS=1 \ - WXPORT=%{lcport} \ - UNICODE=%{unicode} \ - WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \ - install \ - --root=$RPM_BUILD_ROOT -#---------------------------------------------------------------- +#---------------------------------------------------------------------- %install -##[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT WXDIR=`pwd` -# # install wxWindows -# cd bld -# make prefix=$RPM_BUILD_ROOT%{wxpref} install -# make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install -# make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0" prefix=$RPM_BUILD_ROOT%{wxpref} install -# make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install -# make -C contrib/src/xrc prefix=$RPM_BUILD_ROOT%{wxpref} install - -# # install wxPython -# cd $WXDIR/wxPython -# %{python} setup.py \ -# NO_SCRIPTS=1 \ -# WXPORT=%{lcport} \ -# UNICODE=%{unicode} \ -# WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \ -# install \ -# --root=$RPM_BUILD_ROOT +# Install wxGTK and contribs +cd bld +make prefix=$RPM_BUILD_ROOT%{wxpref} install +make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install +make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install +# Install wxPython for wxGTK +cd $WXDIR/wxPython +%{python} setup.py \ + WXPORT=%{port} \ + UNICODE=%{unicode} \ + EP_ADD_OPTS=1 \ + EP_FULL_VER=%{fullver} \ + NO_SCRIPTS=1 \ + WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \ + build_ext --rpath=%{wxpref}/lib \ + install \ + --root=$RPM_BUILD_ROOT -# Other "install" tasks... -cd $WXDIR/wxPython +# remove the wx-config symlink, we'll redo it when installing the -devel package +rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config -# install the wxPython headers -cp -R include $RPM_BUILD_ROOT%{wxpref} -mkdir -p $RPM_BUILD_ROOT%{wxpref}/include/wx/wxPython/i_files -cp src/*.i $RPM_BUILD_ROOT%{wxpref}/include/wx/wxPython/i_files +# make sure that debug info is stripped +strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so # Since I want this RPM to be as generic as possible I won't let @@ -206,10 +293,8 @@ cp src/*.i $RPM_BUILD_ROOT%{wxpref}/include/wx/wxPython/i_files # the #! line to use the real python pathname. Since some distros # install python 2.2 as python2 and others as python I can't let # distutils do that otherwise the dependencies will be fouled up. -# Copy them manually instead, leaving the #!/bin/env line intact. -# TODO: Should this be dependent on %{builtin_libs} or something like -# it? - +# Copy them manually instead, leaving the #!/usr/bin/env line intact. +cd $WXDIR/wxPython mkdir -p $RPM_BUILD_ROOT%{pref}/bin for s in \ helpviewer \ @@ -221,122 +306,145 @@ for s in \ pycrust \ pywrap \ pyshell \ + pywxrc \ xrced; do cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin done -# Install wxrc -cp $WXDIR/bld/contrib/utils/wxrc/wxrc $RPM_BUILD_ROOT%{pref}/bin - - -# link specific name to generic name -ln -s wxPython-%{version} $RPM_BUILD_ROOT%{wxprefbase} - - - - -# Copy icons and make menu entries -#-- This only works for Mandrake. Is there a cross-distro way to do it? -##mkdir -p $RPM_BUILD_ROOT%{_iconsdir} -##mkdir -p $RPM_BUILD_ROOT%{_miconsdir} -##mkdir -p $RPM_BUILD_ROOT%{_menudir} -##install -p -m 644 $WXDIR/wxPython/wxPython/py/PyCrust_32.png $RPM_BUILD_ROOT%{_iconsdir}/PyCrust.png -##install -p -m 644 $WXDIR/wxPython/wxPython/py/PyCrust_16.png $RPM_BUILD_ROOT%{_miconsdir}/PyCrust.png -##install -p -m 644 $WXDIR/wxPython/wxPython/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_iconsdir}/XRCed.png -##install -p -m 644 $WXDIR/wxPython/wxPython/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_miconsdir}/XRCed.png -## -##cat > $RPM_BUILD_ROOT%{_menudir}/%{name} < FILELIST -# $GFL -r $RPM_BUILD_ROOT %{pref}/bin >> FILELIST -# $GFL $RPM_BUILD_ROOT %{pref}/lib >> FILELIST -# $GFL -r $RPM_BUILD_ROOT %{pref}/lib/python%{pyver} >> FILELIST -# $GFL -r $RPM_BUILD_ROOT %{pref}/share >> FILELIST -# $GFL $RPM_BUILD_ROOT %{wxpref} >> FILELIST -# $GFL $RPM_BUILD_ROOT %{wxprefbase} >> FILELIST -# $GFL $RPM_BUILD_ROOT %{wxpref}/lib >> FILELIST -# $GFL $RPM_BUILD_ROOT "%{wxpref}/lib/libwx*" >> FILELIST -# $GFL -r $RPM_BUILD_ROOT %{wxpref}/share >> FILELIST -# ###GFL -r $RPM_BUILD_ROOT %{_iconsdir} >> FILELIST -# ##$GFL -r $RPM_BUILD_ROOT %{_menudir} >> FILELIST - -# $GFL $RPM_BUILD_ROOT %{wxpref}/include > DEVELLIST -# $GFL -r $RPM_BUILD_ROOT %{wxpref}/include/wx >> DEVELLIST -# $GFL -r $RPM_BUILD_ROOT %{wxpref}/lib/wx >> DEVELLIST -# $GFL $RPM_BUILD_ROOT %{wxconfigname} >> DEVELLIST -# $GFL $RPM_BUILD_ROOT %{wxpref}/bin/wx-config >> DEVELLIST - - -#---------------------------------------------------------------- -##%post -##%{update_menus} -## -##%postun -##%{clean_menus} - - -%pre -if [ -e %{wxprefbase} ]; then - rm -r %{wxprefbase} + +# install KDE & GNOME menu items +mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development +mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications +for d in distrib/*.desktop; do + install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development + install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications +done + +# install KDE icons +mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps +mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps +install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png +install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png +install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png +install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png +install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png +install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png + +# install Mandrake menu items +mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu +cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <