X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/5814e8ba4e57839acd1eb7491ed392b07e382593..245b9db51823e59bd61f0d7c0c69b419495cf0b7:/docs/latex/wx/config.tex

diff --git a/docs/latex/wx/config.tex b/docs/latex/wx/config.tex
index 5955677d54..83c1e01824 100644
--- a/docs/latex/wx/config.tex
+++ b/docs/latex/wx/config.tex
@@ -53,7 +53,7 @@ Here is how you would typically use this class:
 
   // another example: using default values and the full path instead of just
   // key name: if the key is not found , the value 17 is returned
-  long value = config->Read("/LastRun/CalculatedValues/MaxValue", 17);
+  long value = config->ReadLong("/LastRun/CalculatedValues/MaxValue", 17);
   ...
   ...
   ...
@@ -141,10 +141,10 @@ sensible!):
   conf->Write("../GroupEntry", 2);
   conf->SetPath("..");
 
-  wxASSERT( conf->Read("Subgroup/SubgroupEntry", 0l) == 3 );
+  wxASSERT( conf->ReadLong("Subgroup/SubgroupEntry", 0) == 3 );
 
   // use absolute path: it is allowed, too
-  wxASSERT( conf->Read("/RootEntry", 0l) == 1 );
+  wxASSERT( conf->ReadLong("/RootEntry", 0) == 1 );
 \end{verbatim}
 
 {\it Warning}: it is probably a good idea to always restore the path to its
@@ -174,7 +174,7 @@ doesn't save and restore the path):
     foo(config);
 
     // we're reading "/Foo/Data/Test" here! -1 will probably be returned...
-    wxASSERT( config->Read("Test", -1) == 17 );
+    wxASSERT( config->ReadLong("Test", -1) == 17 );
   }
 \end{verbatim}
 
@@ -262,13 +262,11 @@ These function are the core of wxConfigBase class: they allow you to read and
 write config file data. All {\it Read} function take a default value which
 will be returned if the specified key is not found in the config file.
 
-Currently, only two types of data are supported: string and long (but it might
-change in the near future). To work with other types: for {\it int} or {\it
-bool} you can work with function taking/returning {\it long} and just use the
-casts. Better yet, just use {\it long} for all variables which you're going to
-save in the config file: chances are that {\tt sizeof(bool) == sizeof(int) == sizeof(long)} anyhow on your system. For {\it float}, {\it double} and, in
-general, any other type you'd have to translate them to/from string
-representation and use string functions.
+Currently, supported types of data are:
+\helpref{wxString}{wxstring}, {\it long}, {\it double}, {\it bool},
+\helpref{wxColour}{wxcolour} and any other types,
+for which functions \helpref{wxToString}{wxtostring}
+and \helpref{wxFromString}{wxfromstring} are defined.
 
 Try not to read long values into string variables and vice versa: although it
 just might work with wxFileConfig, you will get a system error with
@@ -672,28 +670,6 @@ not found, {\it l} is not changed.
 Reads a long value, returning \true if the value was found. If the value was
 not found, {\it defaultVal} is used instead.
 
-\constfunc{long }{Read}{\param{const wxString\& }{key}, \param{long}{ defaultVal}}
-
-Reads a long value from the key and returns it. {\it defaultVal} is returned
-if the key is not found.
-
-NB: writing
-
-{\small
-\begin{verbatim}
-    conf->Read("key", 0);
-\end{verbatim}
-}
-
-won't work because the call is ambiguous: compiler can not choose between two
-{\it Read} functions. Instead, write:
-
-{\small
-\begin{verbatim}
-    conf->Read("key", 0l);
-\end{verbatim}
-}
-
 \constfunc{bool}{Read}{\param{const wxString\& }{ key}, \param{double*}{ d}}
 
 Reads a double value, returning \true if the value was found. If the value was
@@ -721,6 +697,23 @@ not found, {\it defaultVal} is used instead.
 Reads a binary block, returning \true if the value was found. If the value was
 not found, {\it buf} is not changed.
 
+\constfunc{bool}{Read}{\param{const wxString\& }{ key}, \param{T*}{ value}}
+
+Reads a value of type T, for which function
+\helpref{wxFromString}{wxfromstring} is defined,
+returning \true if the value was found.
+If the value was not found, {\it value} is not changed.
+
+\constfunc{bool}{Read}{\param{const wxString\& }{ key}, \param{T*}{ value},
+                       \param{T const\& }{ defaultVal}}
+
+Reads a value of type T, for which function
+\helpref{wxFromString}{wxfromstring} is defined,
+returning \true if the value was found.
+If the value was not found, {\it defaultVal} is used instead.
+
+bool Read(const wxString& key, T* value) const;
+
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par
 \indented{2cm}{\begin{twocollist}
@@ -740,6 +733,39 @@ implements the following methods:\par
 }}
 
 
+\membersection{wxConfigBase::ReadBool}\label{wxconfigbasereadbool}
+
+\constfunc{long }{ReadBool}{\param{const wxString\& }{key}, \param{bool}{ defaultVal}}
+
+Reads a bool value from the key and returns it. {\it defaultVal} is returned
+if the key is not found.
+
+
+\membersection{wxConfigBase::ReadDouble}\label{wxconfigbasereaddouble}
+
+\constfunc{long }{ReadDouble}{\param{const wxString\& }{key}, \param{double}{ defaultVal}}
+
+Reads a double value from the key and returns it. {\it defaultVal} is returned
+if the key is not found.
+
+
+\membersection{wxConfigBase::ReadLong}\label{wxconfigbasereadlong}
+
+\constfunc{long }{ReadLong}{\param{const wxString\& }{key}, \param{long}{ defaultVal}}
+
+Reads a long value from the key and returns it. {\it defaultVal} is returned
+if the key is not found.
+
+
+\membersection{wxConfigBase::ReadObject}\label{wxconfigbasereadobject}
+
+\constfunc{T }{ReadObject}{\param{const wxString\& }{key}, \param{T const&}{ defaultVal}}
+
+Reads a value of type T, for which function
+\helpref{wxFromString}{wxfromstring} is defined, from the key and returns it. 
+{\it defaultVal} is returned if the key is not found.
+
+
 \membersection{wxConfigBase::RenameEntry}\label{wxconfigbaserenameentry}
 
 \func{bool}{RenameEntry}{\param{const wxString\& }{ oldName}, \param{const wxString\& }{ newName}}
@@ -813,7 +839,11 @@ value}}
 
 \func{bool}{Write}{\param{const wxString\& }{ key}, \param{const wxMemoryBuffer\&}{ buf}}
 
-These functions write the specified value to the config file and return \true on success.
+\func{bool}{Write}{\param{const wxString\& }{ key}, \param{const T\&}{ buf}}
+
+These functions write the specified value to the config file and return \true
+on success. In the last one, function \helpref{wxToString}{wxtostring} must be
+defined for type {\it T}.
 
 \pythonnote{In place of a single overloaded method name, wxPython
 implements the following methods:\par