X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/56eeb97339e6760855b4e7866b7f4dd92368a189..b6fd0b424573e09ae7e83a28b225bbba008157b7:/include/wx/palmos/setup0.h diff --git a/include/wx/palmos/setup0.h b/include/wx/palmos/setup0.h index 63873ddd7c..bb985e534d 100644 --- a/include/wx/palmos/setup0.h +++ b/include/wx/palmos/setup0.h @@ -47,6 +47,17 @@ // Recommended setting: 0 (please update your code) #define WXWIN_COMPATIBILITY_2_8 1 +// Use the 2.8-compatible events and Connect(): this is set to 0 by default as +// the new events bring significant benefits in compile-time safety and +// flexibility but can be disabled to somewhat reduce the compilation time and, +// especially, to still allow building if the compiler template support is too +// bad to compile the new code. +// +// Default is 0 for all compilers except VC6 currently. +// +// Recommended setting: 0 (please upgrade your compiler instead of changing it) +#define wxEVENTS_COMPATIBILITY_2_8 0 + // MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when // default system font is used for wxWindow::GetCharWidth/Height() instead of // the current font. @@ -147,29 +158,15 @@ // Unicode support // ---------------------------------------------------------------------------- -// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be -// defined as wchar_t, wxString will use Unicode internally. If you set this -// to 1, you must use wxT() macro for all literal strings in the program. -// -// Unicode is currently only fully supported under Windows NT/2000/XP -// (Windows 9x doesn't support it and the programs compiled in Unicode mode -// will not run under 9x -- but see wxUSE_UNICODE_MSLU below). -// -// Default is 1 -// -// Recommended setting: 1 +// These settings are obsolete: the library is always built in Unicode mode +// now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if +// absolutely necessary -- updating it is strongly recommended as the ANSI mode +// will disappear completely in future wxWidgets releases. #ifndef wxUSE_UNICODE #define wxUSE_UNICODE 1 #endif -// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without -// compiling the program in Unicode mode. More precisely, it will be possible -// to construct wxString from a wide (Unicode) string and convert any wxString -// to Unicode. -// -// Default is 1 -// -// Recommended setting: 1 +// wxUSE_WCHAR_T is required by wxWidgets now, don't change. #define wxUSE_WCHAR_T 1 // ---------------------------------------------------------------------------- @@ -259,6 +256,22 @@ // Recommended setting: 1 as setting it to 0 disables many other things #define wxUSE_STREAMS 1 +// This is not a real option but is used as the default value for +// wxUSE_STD_IOSTREAM and wxUSE_STD_STRING. +// +// Currently the Digital Mars and Watcom compilers come without standard C++ +// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have +// them (e.g. from STLPort). +// +// VC++ 5.0 does include standard C++ library headers, however they produce +// many warnings that can't be turned off when compiled at warning level 4. +#if defined(__DMC__) || defined(__WATCOMC__) \ + || (defined(_MSC_VER) && _MSC_VER < 1200) + #define wxUSE_STD_DEFAULT 0 +#else + #define wxUSE_STD_DEFAULT 1 +#endif + // Use standard C++ streams if 1 instead of wx streams in some places. If // disabled (default), wx streams are used everywhere and wxWidgets doesn't // depend on the standard streams library. @@ -271,24 +284,15 @@ // Recommended setting: 1 if you use the standard streams anyhow and so // dependency on the standard streams library is not a // problem -#define wxUSE_STD_IOSTREAM 0 +#define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT // Enable conversion to standard C++ string if 1. // // Default is 1 for most compilers. // -// Currently the Digital Mars and Watcom compilers come without standard C++ -// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have -// them (e.g. from STLPort). -// -// VC++ 5.0 does include standard C++ library header, however they produce -// many warnings that can't be turned off when compiled at warning level 4. -#if defined(__DMC__) || defined(__WATCOMC__) \ - || (defined(_MSC_VER) && _MSC_VER < 1200) - #define wxUSE_STD_STRING 0 -#else - #define wxUSE_STD_STRING 1 -#endif +// Recommended setting: 1 unless you want to ensure your program doesn't use +// the standard C++ library at all. +#define wxUSE_STD_STRING wxUSE_STD_DEFAULT // Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf. // Note that if the system's implementation does not support positional @@ -322,6 +326,24 @@ // Recommended setting: 1 #define wxUSE_LONGLONG 1 +// Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for +// storing binary data in wxConfig on most platforms. +// +// Default is 1. +// +// Recommended setting: 1 (but can be safely disabled if you don't use it) +#define wxUSE_BASE64 1 + +// Set this to 1 to be able to use wxEventLoop even in console applications +// (i.e. using base library only, without GUI). This is mostly useful for +// processing socket events but is also necessary to use timers in console +// applications +// +// Default is 1. +// +// Recommended setting: 1 (but can be safely disabled if you don't use it) +#define wxUSE_CONSOLE_EVENTLOOP 1 + // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. // @@ -357,6 +379,21 @@ // i18n support: _() macro, wxLocale class. Requires wxTextFile. #define wxUSE_INTL 1 +// Provide wxFoo_l() functions similar to standard foo() functions but taking +// an extra locale parameter. +// +// Notice that this is fully implemented only for the systems providing POSIX +// xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary +// almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will +// only work for the current user locale and "C" locale. You can use +// wxHAS_XLOCALE_SUPPORT to test whether the full support is available. +// +// Default is 1 +// +// Recommended setting: 1 but may be disabled if you are writing programs +// running only in C locale anyhow +#define wxUSE_XLOCALE 1 + // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which // allow to manipulate dates, times and time intervals. wxDateTime replaces the // old wxTime and wxDate classes which are still provided for backwards @@ -436,6 +473,17 @@ // Set to 1 to use socket classes #define wxUSE_SOCKETS 1 +// Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS) +// +// Notice that currently setting this option under Windows will result in +// programs which can only run on recent OS versions (with ws2_32.dll +// installed) which is why it is disabled by default. +// +// Default is 1. +// +// Recommended setting: 1 if you need IPv6 support +#define wxUSE_IPV6 0 + // Set to 1 to enable virtual file systems (required by wxHTML) #define wxUSE_FILESYSTEM 1 @@ -473,6 +521,9 @@ // Joystick support class #define wxUSE_JOYSTICK 1 +// wxFontEnumerator class +#define wxUSE_FONTENUM 1 + // wxFontMapper class #define wxUSE_FONTMAP 1 @@ -537,9 +588,10 @@ // Recommended setting: 1 #define wxUSE_MEDIACTRL 1 -// Use GStreamer for Unix (req a lot of dependancies) +// Use GStreamer for Unix. // -// Default is 0 +// Default is 0 as this requires a lot of dependencies which might not be +// available. // // Recommended setting: 1 (wxMediaCtrl won't work by default without it) #define wxUSE_GSTREAMER 0 @@ -566,6 +618,13 @@ // Recommended setting: 1 #define wxUSE_AUI 1 +// Use wxPropertyGrid. +// +// Default is 1 +// +// Recommended setting: 1 +#define wxUSE_PROPGRID 1 + // Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla. // // Default is 1 @@ -639,9 +698,11 @@ #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl #define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl #define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox +#define wxUSE_FILECTRL 1 // wxFileCtrl #define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl #define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl #define wxUSE_GAUGE 1 // wxGauge +#define wxUSE_HEADERCTRL 1 // wxHeaderCtrl #define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl #define wxUSE_LISTBOX 1 // wxListBox #define wxUSE_LISTCTRL 1 // wxListCtrl @@ -729,13 +790,13 @@ // Recommended setting: 1 #define wxUSE_TOOLBOOK 1 -// wxTabDialog is a generic version of wxNotebook but it is incompatible with -// the new class. It shouldn't be used in new code. +// wxTaskBarIcon is a small notification icon shown in the system toolbar or +// dock. // -// Default is 0. +// Default is 1. // -// Recommended setting: 0 (use wxNotebook) -#define wxUSE_TAB_DIALOG 0 +// Recommended setting: 1 (but can be set to 0 if you don't need it) +#define wxUSE_TASKBARICON 1 // wxGrid class // @@ -778,6 +839,15 @@ // Recommended setting: 1 but can be safely set to 0 #define wxUSE_BITMAPCOMBOBOX 1 +// wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items +// up and down in it. It is also used as part of wxRearrangeDialog. +// +// Default is 1. +// +// Recommended setting: 1 but can be safely set to 0 (currently used only by +// wxHeaderCtrl) +#define wxUSE_REARRANGECTRL 1 + // ---------------------------------------------------------------------------- // Miscellaneous GUI stuff // ---------------------------------------------------------------------------- @@ -824,6 +894,17 @@ // Recommended setting: 1 (can't be disabled under MSW) #define wxUSE_MENUS 1 +// Use wxNotificationMessage. +// +// wxNotificationMessage allows to show non-intrusive messages to the user +// using balloons, banners, popups or whatever is the appropriate method for +// the current platform. +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_NOTIFICATION_MESSAGE 1 + // Use wxSashWindow class. // // Default is 1. @@ -848,6 +929,20 @@ // wxValidator class and related methods #define wxUSE_VALIDATORS 1 +// Use reference counted ID management: this means that wxWidgets will track +// the automatically allocated ids (those used when you use wxID_ANY when +// creating a window, menu or toolbar item &c) instead of just supposing that +// the program never runs out of them. This is mostly useful only under wxMSW +// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where +// long-running programs can run into problems with ids reuse without this. On +// the other platforms, where the ids have the full int range, this shouldn't +// be necessary. +#ifdef __WXMSW__ +#define wxUSE_AUTOID_MANAGEMENT 1 +#else +#define wxUSE_AUTOID_MANAGEMENT 0 +#endif + // ---------------------------------------------------------------------------- // common dialogs // ---------------------------------------------------------------------------- @@ -1052,7 +1147,7 @@ // ---------------------------------------------------------------------------- // wxSingleInstanceChecker class allows to verify at startup if another program -// instance is running (it is only available under Win32) +// instance is running. // // Default is 1 // @@ -1090,7 +1185,7 @@ // Include mouse wheel support // ---------------------------------------------------------------------------- -// postscript support settings +// wxDC classes for various output formats // ---------------------------------------------------------------------------- // Set to 1 for PostScript device context. @@ -1099,28 +1194,9 @@ // Set to 1 to use font metric files in GetTextExtent #define wxUSE_AFM_FOR_POSTSCRIPT 1 -// ---------------------------------------------------------------------------- -// database classes -// ---------------------------------------------------------------------------- - -// Define 1 to use ODBC classes -#define wxUSE_ODBC 0 - -// For backward compatibility reasons, this parameter now only controls the -// default scrolling method used by cursors. This default behavior can be -// overriden by setting the second param of wxDB::wxDbGetConnection() or -// wxDb() constructor to indicate whether the connection (and any wxDbTable()s -// that use the connection) should support forward only scrolling of cursors, -// or both forward and backward support for backward scrolling cursors is -// dependent on the data source as well as the ODBC driver being used. -#define wxODBC_FWD_ONLY_CURSORS 1 - -// Default is 0. Set to 1 to use the deprecated classes, enum types, function, -// member variables. With a setting of 1, full backward compatibility with the -// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0, -// as future development will be done only on the non-deprecated -// functions/classes/member variables/etc. -#define wxODBC_BACKWARD_COMPATABILITY 0 +// Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows +// to create files in SVG (Scalable Vector Graphics) format. +#define wxUSE_SVG 1 // ---------------------------------------------------------------------------- // other compiler (mis)features @@ -1135,14 +1211,15 @@ #define REMOVE_UNUSED_ARG 1 // VC++ 4.2 and above allows and but you can't mix -// them. Set to 1 for , 0 for . Note that VC++ 7.1 -// and later doesn't support wxUSE_IOSTREAMH == 1 and so will be -// used anyhow. +// them. Set this option to 1 to use , 0 to use . // -// Default is 1. +// Note that newer compilers (including VC++ 7.1 and later) don't support +// wxUSE_IOSTREAMH == 1 and so will be used anyhow. +// +// Default is 0. // -// Recommended setting: whatever your compiler likes more -#define wxUSE_IOSTREAMH 1 +// Recommended setting: 0, only set to 1 if you use a really old compiler +#define wxUSE_IOSTREAMH 0 // ---------------------------------------------------------------------------- // image format support