X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/526954c5968baa29218c994ec48e476ae2bd4b9f..487f6627541e49810f6fb48947a7226717fe17a8:/interface/wx/dataview.h diff --git a/interface/wx/dataview.h b/interface/wx/dataview.h index 7e4029aaf2..e45d0fced1 100644 --- a/interface/wx/dataview.h +++ b/interface/wx/dataview.h @@ -20,17 +20,26 @@ wxDataViewModel::GetValue in order to define the data model which acts as an interface between your actual data and the wxDataViewCtrl. - Since you will usually also allow the wxDataViewCtrl to change your data - through its graphical interface, you will also have to override - wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change - to some data has been committed. + Note that wxDataViewModel does not define the position or index of any item + in the control because different controls might display the same data differently. + wxDataViewModel does provide a wxDataViewModel::Compare method which the + wxDataViewCtrl may use to sort the data either in conjunction with a column + header or without (see wxDataViewModel::HasDefaultCompare). wxDataViewModel (as indeed the entire wxDataViewCtrl code) is using wxVariant to store data and its type in a generic way. wxVariant can be extended to contain - almost any data without changes to the original class. + almost any data without changes to the original class. To a certain extent, + you can use (the somewhat more elegant) wxAny instead of wxVariant as there + is code to convert between the two, but it is unclear what impact this will + have on performance. + + Since you will usually allow the wxDataViewCtrl to change your data + through its graphical interface, you will also have to override + wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change + to some data has been committed. - The data that is presented through this data model is expected to change at - run-time. You need to inform the data model when a change happened. + If the data represented by the model is changed by something else than its + associated wxDataViewCtrl, the control has to be notified about the change. Depending on what happened you need to call one of the following methods: - wxDataViewModel::ValueChanged, - wxDataViewModel::ItemAdded, @@ -44,12 +53,6 @@ - wxDataViewModel::ItemsDeleted, - wxDataViewModel::ItemsChanged. - Note that wxDataViewModel does not define the position or index of any item - in the control because different controls might display the same data differently. - wxDataViewModel does provide a wxDataViewModel::Compare method which the - wxDataViewCtrl may use to sort the data either in conjunction with a column - header or without (see wxDataViewModel::HasDefaultCompare). - This class maintains a list of wxDataViewModelNotifier which link this class to the specific implementations on the supported platforms so that e.g. calling wxDataViewModel::ValueChanged on this model will just call @@ -75,6 +78,19 @@ // add columns now @endcode + A potentially better way to avoid memory leaks is to use wxObjectDataPtr + + @code + wxObjectDataPtr musicModel; + + wxDataViewCtrl *musicCtrl = new wxDataViewCtrl( this, wxID_ANY ); + musicModel = new MyMusicModel; + m_musicCtrl->AssociateModel( musicModel.get() ); + + // add columns now + @endcode + + @library{wxadv} @category{dvc} */ @@ -151,6 +167,30 @@ public: virtual bool GetAttr(const wxDataViewItem& item, unsigned int col, wxDataViewItemAttr& attr) const; + /** + Override this to indicate that the item should be disabled. + + Disabled items are displayed differently (e.g. grayed out) and cannot + be interacted with. + + The base class version always returns @true, thus making all items + enabled by default. + + @param item + The item whose enabled status is requested. + @param col + The column of the item whose enabled status is requested. + @return + @true if this item should be enabled, @false otherwise. + + @note Currently disabling items is not supported by the wxOSX/Carbon + implementation. + + @since 2.9.2 + */ + virtual bool IsEnabled(const wxDataViewItem &item, + unsigned int col) const; + /** Override this so the control can query the child items of an item. Returns the number of items. @@ -173,7 +213,7 @@ public: /** Override this to indicate which wxDataViewItem representing the parent - of @a item or an invalid wxDataViewItem if the the root item is + of @a item or an invalid wxDataViewItem if the root item is the parent item. */ virtual wxDataViewItem GetParent(const wxDataViewItem& item) const = 0; @@ -188,7 +228,7 @@ public: /** Override this method to indicate if a container item merely acts as a headline (or for categorisation) or if it also acts a normal item with - entries for futher columns. By default returns @false. + entries for further columns. By default returns @false. */ virtual bool HasContainerColumns(const wxDataViewItem& item) const; @@ -227,41 +267,41 @@ public: /** Call this to inform the model that an item has been added to the data. */ - virtual bool ItemAdded(const wxDataViewItem& parent, + bool ItemAdded(const wxDataViewItem& parent, const wxDataViewItem& item); /** Call this to inform the model that an item has changed. - This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED + This will eventually emit a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED event (in which the column fields will not be set) to the user. */ - virtual bool ItemChanged(const wxDataViewItem& item); + bool ItemChanged(const wxDataViewItem& item); /** Call this to inform the model that an item has been deleted from the data. */ - virtual bool ItemDeleted(const wxDataViewItem& parent, + bool ItemDeleted(const wxDataViewItem& parent, const wxDataViewItem& item); /** Call this to inform the model that several items have been added to the data. */ - virtual bool ItemsAdded(const wxDataViewItem& parent, + bool ItemsAdded(const wxDataViewItem& parent, const wxDataViewItemArray& items); /** Call this to inform the model that several items have changed. - This will eventually emit wxEVT_DATAVIEW_ITEM_VALUE_CHANGED + This will eventually emit @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED events (in which the column fields will not be set) to the user. */ - virtual bool ItemsChanged(const wxDataViewItemArray& items); + bool ItemsChanged(const wxDataViewItemArray& items); /** Call this to inform the model that several items have been deleted. */ - virtual bool ItemsDeleted(const wxDataViewItem& parent, + bool ItemsDeleted(const wxDataViewItem& parent, const wxDataViewItemArray& items); /** @@ -294,7 +334,7 @@ public: This is also called from wxDataViewCtrl's internal editing code, e.g. when editing a text field in the control. - This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED + This will eventually emit a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED event to the user. */ virtual bool ValueChanged(const wxDataViewItem& item, @@ -311,28 +351,17 @@ protected: /** - @class wxDataViewIndexListModel - - wxDataViewIndexListModel is a specialized data model which lets you address - an item by its position (row) rather than its wxDataViewItem (which you can - obtain from this class). - This model also provides its own wxDataViewIndexListModel::Compare - method which sorts the model's data by the index. + @class wxDataViewListModel - This model is not a virtual model since the control stores each wxDataViewItem. - Use wxDataViewVirtualListModel if you need to display millions of items or - have other reason to use a virtual control. + Base class with abstract API for wxDataViewIndexListModel and + wxDataViewVirtualListModel. @library{wxadv} @category{dvc} */ -class wxDataViewIndexListModel : public wxDataViewModel +class wxDataViewListModel : public wxDataViewModel { public: - /** - Constructor. - */ - wxDataViewIndexListModel(unsigned int initial_size = 0); /** Destructor. @@ -344,7 +373,7 @@ public: */ int Compare(const wxDataViewItem& item1, const wxDataViewItem& item2, - unsigned int column, bool ascending); + unsigned int column, bool ascending) const; /** Override this to indicate that the row has special font attributes. @@ -367,7 +396,29 @@ public: wxDataViewItemAttr& attr) const; /** - Returns the number of items (i.e. rows) in the list. + Override this if you want to disable specific items. + + The base class version always returns @true, thus making all items + enabled by default. + + @param row + The row of the item whose enabled status is requested. + @param col + The column of the item whose enabled status is requested. + @return + @true if the item at this row and column should be enabled, + @false otherwise. + + @note See wxDataViewModel::IsEnabled() for the current status of + support for disabling the items under different platforms. + + @since 2.9.2 + */ + virtual bool IsEnabledByRow(unsigned int row, + unsigned int col) const; + + /** + Returns the number of items (or rows) in the list. */ unsigned int GetCount() const; @@ -439,6 +490,34 @@ public: }; +/** + @class wxDataViewIndexListModel + + wxDataViewIndexListModel is a specialized data model which lets you address + an item by its position (row) rather than its wxDataViewItem (which you can + obtain from this class). + This model also provides its own wxDataViewIndexListModel::Compare + method which sorts the model's data by the index. + + This model is not a virtual model since the control stores each wxDataViewItem. + Use wxDataViewVirtualListModel if you need to display millions of items or + have other reason to use a virtual control. + + @see wxDataViewListModel for the API. + + @library{wxadv} + @category{dvc} +*/ + +class wxDataViewIndexListModel : public wxDataViewListModel +{ +public: + /** + Constructor. + */ + wxDataViewIndexListModel(unsigned int initial_size = 0); + +}; /** @class wxDataViewVirtualListModel @@ -448,15 +527,15 @@ public: the exact same interface as wxDataViewIndexListModel. The important difference is that under platforms other than OS X, using this model will result in a truly virtual control able to handle millions of items - as the control doesn't store any item (a feature not supported by the - Carbon API under OS X). + as the control doesn't store any item (a feature not supported by OS X). - @see wxDataViewIndexListModel for the API. + @see wxDataViewListModel for the API. @library{wxadv} @category{dvc} */ -class wxDataViewVirtualListModel : public wxDataViewModel + +class wxDataViewVirtualListModel : public wxDataViewListModel { public: /** @@ -464,10 +543,6 @@ public: */ wxDataViewVirtualListModel(unsigned int initial_size = 0); - /** - Returns the number of virtual items (i.e. rows) in the list. - */ - unsigned int GetCount() const; }; @@ -502,6 +577,16 @@ public: */ void SetColour(const wxColour& colour); + /** + Call this to set the background colour to use. + + Currently this attribute is only supported in the generic version of + wxDataViewCtrl and ignored by the native GTK+ and OS X implementations. + + @since 2.9.4 + */ + void SetBackgroundColour(const wxColour& colour); + /** Call this to indicate that the item shall be displayed in italic text. */ @@ -536,8 +621,9 @@ public: /** Constructor. */ - wxDataViewItem(void* id = NULL); + wxDataViewItem(); wxDataViewItem(const wxDataViewItem& item); + explicit wxDataViewItem(void* id); //@} /** @@ -552,6 +638,61 @@ public: }; +// ---------------------------------------------------------------------------- +// wxDataViewCtrl flags +// ---------------------------------------------------------------------------- + +// size of a wxDataViewRenderer without contents: +#define wxDVC_DEFAULT_RENDERER_SIZE 20 + +// the default width of new (text) columns: +#define wxDVC_DEFAULT_WIDTH 80 + +// the default width of new toggle columns: +#define wxDVC_TOGGLE_DEFAULT_WIDTH 30 + +// the default minimal width of the columns: +#define wxDVC_DEFAULT_MINWIDTH 30 + +// The default alignment of wxDataViewRenderers is to take +// the alignment from the column it owns. +#define wxDVR_DEFAULT_ALIGNMENT -1 + +#define wxDV_SINGLE 0x0000 // for convenience +#define wxDV_MULTIPLE 0x0001 // can select multiple items + +#define wxDV_NO_HEADER 0x0002 // column titles not visible +#define wxDV_HORIZ_RULES 0x0004 // light horizontal rules between rows +#define wxDV_VERT_RULES 0x0008 // light vertical rules between columns + +#define wxDV_ROW_LINES 0x0010 // alternating colour in rows +#define wxDV_VARIABLE_LINE_HEIGHT 0x0020 // variable line height + +// events + +wxEventType wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED; + +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSING; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSED; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDING; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDED; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_START_EDITING; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED; + +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU; + +wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICK; +wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK; +wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED; +wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED; +wxEventType wxEVT_COMMAND_DATAVIEW_CACHE_HINT; + +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE; +wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_DROP; /** @class wxDataViewCtrl @@ -589,6 +730,8 @@ public: Multiple selection mode. @style{wxDV_ROW_LINES} Use alternating colours for rows if supported by platform and theme. + Currently only supported by the native GTK and OS X implementations + but not by the generic one. @style{wxDV_HORIZ_RULES} Display fine rules between row if supported. @style{wxDV_VERT_RULES} @@ -604,11 +747,13 @@ public: @event{EVT_DATAVIEW_SELECTION_CHANGED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED event. @event{EVT_DATAVIEW_ITEM_ACTIVATED(id, func)} - Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. + Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. This event + is triggered by double clicking an item or pressing some special key + (usually "Enter") when it is focused. @event{EVT_DATAVIEW_ITEM_START_EDITING(id, func)} - Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event. This + Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_START_EDITING event. This event can be vetoed in order to prevent editing on an item by item - basis. Still experimental. + basis. @event{EVT_DATAVIEW_ITEM_EDITING_STARTED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event. @event{EVT_DATAVIEW_ITEM_EDITING_DONE(id, func)} @@ -624,9 +769,13 @@ public: @event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED event. @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)} - Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event. + Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event + generated when the user right clicks inside the control. Notice that + this menu is generated even if the click didn't occur on any valid + item, in this case wxDataViewEvent::GetItem() simply returns an + invalid item. @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)} - Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event. + Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICK event. @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICKED event. @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)} @@ -641,6 +790,11 @@ public: Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP event. @endEventTable + Notice that this control doesn't allow to process generic mouse events such + as @c wxEVT_LEFT_DOWN in all ports (notably it doesn't work in wxGTK). If + you need to handle any mouse events not covered by the ones above, consider + using a custom renderer for the cells that must handle them. + @library{wxadv} @category{ctrl,dvc} @appearance{dataviewctrl.png} @@ -660,7 +814,8 @@ public: const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = 0, - const wxValidator& validator = wxDefaultValidator); + const wxValidator& validator = wxDefaultValidator, + const wxString& name = wxDataViewCtrlNameStr); /** Destructor. @@ -841,13 +996,25 @@ public: const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = 0, - const wxValidator& validator = wxDefaultValidator); + const wxValidator& validator = wxDefaultValidator, + const wxString& name = wxDataViewCtrlNameStr); /** Deletes given column. */ virtual bool DeleteColumn(wxDataViewColumn* column); + /** + Programmatically starts editing given cell of @a item. + + Doesn't do anything if the item or this column is not editable. + + @note Currently not implemented in wxOSX/Carbon. + + @since 2.9.4 + */ + virtual void EditItem(const wxDataViewItem& item, const wxDataViewColumn *column); + /** Enable drag operations using the given @a format. */ @@ -897,13 +1064,59 @@ public: */ wxDataViewColumn* GetExpanderColumn() const; + /** + Returns the currently focused item. + + This is the item that the keyboard commands apply to. It may be invalid + if there is no focus currently. + + This method is mostly useful for the controls with @c wxDV_MULTIPLE + style as in the case of single selection it returns the same thing as + GetSelection(). + + Notice that under all platforms except Mac OS X the currently focused + item may be selected or not but under OS X the current item is always + selected. + + @see SetCurrentItem(), GetCurrentColumn() + + @since 2.9.2 + */ + wxDataViewItem GetCurrentItem() const; + + /** + Returns the column that currently has focus. + + If the focus is set to individual cell within the currently focused + item (as opposed to being on the item as a whole), then this is the + column that the focus is on. + + Returns NULL if no column currently has focus. + + @see GetCurrentItem() + + @since 2.9.4 + */ + wxDataViewColumn *GetCurrentColumn() const; + /** Returns indentation. */ int GetIndent() const; /** - Returns item rect. + Returns item rectangle. + + This method is currently not implemented at all in wxGTK and only + implemented for non-@NULL @a col argument in wxOSX. It is fully + implemented in the generic version of the control. + + @param item + A valid item. + @param col + If non-@NULL, the rectangle returned corresponds to the + intersection of the item with the specified column. If @NULL, the + rectangle spans all the columns. */ virtual wxRect GetItemRect(const wxDataViewItem& item, const wxDataViewColumn* col = NULL) const; @@ -913,13 +1126,35 @@ public: */ wxDataViewModel* GetModel(); + /** + Returns the number of currently selected items. + + This method may be called for both the controls with single and + multiple selections and returns the number of selected item, possibly + 0, in any case. + + @since 2.9.3 + */ + virtual int GetSelectedItemsCount() const; + /** Returns first selected item or an invalid item if none is selected. + + This method may be called for both the controls with single and + multiple selections but returns an invalid item if more than one item + is selected in the latter case, use HasSelection() to determine if + there are any selected items when using multiple selection. */ virtual wxDataViewItem GetSelection() const; /** Fills @a sel with currently selected items and returns their number. + + This method may be called for both the controls with single and + multiple selections. In the single selection case it returns the array + with at most one element in it. + + @see GetSelectedItemsCount() */ virtual int GetSelections(wxDataViewItemArray& sel) const; @@ -929,6 +1164,20 @@ public: */ virtual wxDataViewColumn* GetSortingColumn() const; + /** + Returns true if any items are currently selected. + + This method may be called for both the controls with single and + multiple selections. + + Calling this method is equivalent to calling GetSelectedItemsCount() + and comparing its result with 0 but is more clear and might also be + implemented more efficiently in the future. + + @since 2.9.3 + */ + bool HasSelection() const; + /** Hittest. */ @@ -947,6 +1196,10 @@ public: /** Select the given item. + + In single selection mode this changes the (unique) currently selected + item. In multi selection mode, the @a item is selected and the + previously selected items remain selected. */ virtual void Select(const wxDataViewItem& item); @@ -961,7 +1214,26 @@ public: void SetExpanderColumn(wxDataViewColumn* col); /** - Sets the indendation. + Changes the currently focused item. + + The @a item parameter must be valid, there is no way to remove the + current item from the control. + + In single selection mode, calling this method is the same as calling + Select() and is thus not very useful. In multiple selection mode this + method only moves the current item however without changing the + selection except under OS X where the current item is always selected, + so calling SetCurrentItem() selects @a item if it hadn't been selected + before. + + @see GetCurrentItem() + + @since 2.9.2 + */ + void SetCurrentItem(const wxDataViewItem& item); + + /** + Sets the indentation. */ void SetIndent(int indent); @@ -980,6 +1252,26 @@ public: This method only has effect if multiple selections are allowed. */ virtual void UnselectAll(); + + /** + Sets the row height. + + This function can only be used when all rows have the same height, i.e. + when wxDV_VARIABLE_LINE_HEIGHT flag is not used. + + Currently this is implemented in the generic and native GTK versions + only and nothing is done (and @false returned) when using OS X port. + + Also notice that this method can only be used to increase the row + height compared with the default one (as determined by the return value + of wxDataViewRenderer::GetSize()), if it is set to a too small value + then the minimum required by the renderers will be used. + + @return @true if the line height was changed or @false otherwise. + + @since 2.9.2 + */ + virtual bool SetRowHeight(int rowHeight); }; @@ -1019,34 +1311,46 @@ public: /** Called by owning model. + + @return Always return @true from this function in derived classes. */ virtual bool ItemAdded(const wxDataViewItem& parent, const wxDataViewItem& item) = 0; /** Called by owning model. + + @return Always return @true from this function in derived classes. */ virtual bool ItemChanged(const wxDataViewItem& item) = 0; /** Called by owning model. + + @return Always return @true from this function in derived classes. */ virtual bool ItemDeleted(const wxDataViewItem& parent, const wxDataViewItem& item) = 0; /** Called by owning model. + + @return Always return @true from this function in derived classes. */ virtual bool ItemsAdded(const wxDataViewItem& parent, const wxDataViewItemArray& items); /** Called by owning model. + + @return Always return @true from this function in derived classes. */ virtual bool ItemsChanged(const wxDataViewItemArray& items); /** Called by owning model. + + @return Always return @true from this function in derived classes. */ virtual bool ItemsDeleted(const wxDataViewItem& parent, const wxDataViewItemArray& items); @@ -1063,6 +1367,8 @@ public: /** Called by owning model. + + @return Always return @true from this function in derived classes. */ virtual bool ValueChanged(const wxDataViewItem& item, unsigned int col) = 0; }; @@ -1073,18 +1379,54 @@ public: */ enum wxDataViewCellMode { + /** + The cell only displays information and cannot be manipulated or + otherwise interacted with in any way. + + Note that this doesn't mean that the row being drawn can't be selected, + just that a particular element of it cannot be individually modified. + */ wxDATAVIEW_CELL_INERT, /** - Indicates that the user can double click the cell and something will - happen (e.g. a window for editing a date will pop up). + Indicates that the cell can be @em activated by clicking it or using + keyboard. + + Activating a cell is an alternative to showing inline editor when the + value can be edited in a simple way that doesn't warrant full editor + control. The most typical use of cell activation is toggling the + checkbox in wxDataViewToggleRenderer; others would be e.g. an embedded + volume slider or a five-star rating column. + + The exact means of activating a cell are platform-dependent, but they + are usually similar to those used for inline editing of values. + Typically, a cell would be activated by Space or Enter keys or by left + mouse click. + + @note Do not confuse this with item activation in wxDataViewCtrl + and the wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. That one is + used for activating the item (or, to put it differently, the + entire row) similarly to analogous messages in wxTreeCtrl and + wxListCtrl, and the effect differs (play a song, open a file + etc.). Cell activation, on the other hand, is all about + interacting with the individual cell. + + @see wxDataViewCustomRenderer::ActivateCell() */ wxDATAVIEW_CELL_ACTIVATABLE, /** - Indicates that the user can edit the data in-place, i.e. an control - will show up after a slow click on the cell. This behaviour is best - known from changing the filename in most file managers etc. + Indicates that the user can edit the data in-place in an inline editor + control that will show up when the user wants to edit the cell. + + A typical example of this behaviour is changing the filename in a file + managers. + + Editing is typically triggered by slowly double-clicking the cell or by + a platform-dependent keyboard shortcut (F2 is typical on Windows, Space + and/or Enter is common elsewhere and supported on Windows too). + + @see wxDataViewCustomRenderer::CreateEditorCtrl() */ wxDATAVIEW_CELL_EDITABLE }; @@ -1355,12 +1697,15 @@ public: /** - @class wxDataViewChoiceRenderer + A wxDataViewCtrl renderer using wxChoice control and values of strings in + it. This class is used by wxDataViewCtrl to render choice controls. It stores a string so that SetValue() and GetValue() operate on a variant holding a string. + @see wxDataViewChoiceByIndexRenderer + @library{wxadv} @category{dvc} */ @@ -1379,7 +1724,7 @@ public: Returns the choice referred to by index. */ wxString GetChoice(size_t index) const; - + /** Returns all choices. */ @@ -1387,6 +1732,28 @@ public: }; +/** + A wxDataViewCtrl renderer using wxChoice control and indexes into it. + + Unlike its base wxDataViewChoiceRenderer class, this one stores the choice + index, i.e. an @c int, in the variant used by its SetValue() and + GetValue(). + + @library{wxadv} + @category{dvc} +*/ +class wxDataViewChoiceByIndexRenderer : public wxDataViewChoiceRenderer +{ +public: + /** + The ctor. + */ + wxDataViewChoiceByIndexRenderer( const wxArrayString &choices, + wxDataViewCellMode mode = wxDATAVIEW_CELL_EDITABLE, + int alignment = wxDVR_DEFAULT_ALIGNMENT ); +}; + + /** @class wxDataViewDateRenderer @@ -1443,20 +1810,72 @@ public: virtual ~wxDataViewCustomRenderer(); /** - Override this to react to double clicks or ENTER. - This method will only be called in wxDATAVIEW_CELL_ACTIVATABLE mode. + Override this to react to cell @em activation. Activating a cell is an + alternative to showing inline editor when the value can be edited in a + simple way that doesn't warrant full editor control. The most typical + use of cell activation is toggling the checkbox in + wxDataViewToggleRenderer; others would be e.g. an embedded volume + slider or a five-star rating column. + + The exact means of activating a cell are platform-dependent, but they + are usually similar to those used for inline editing of values. + Typically, a cell would be activated by Space or Enter keys or by left + mouse click. + + This method will only be called if the cell has the + wxDATAVIEW_CELL_ACTIVATABLE mode. + + @param cell + Coordinates of the activated cell's area. + @param model + The model to manipulate in response. + @param item + Activated item. + @param col + Activated column of @a item. + @param mouseEvent + If the activation was triggered by mouse click, contains the + corresponding event. Is @NULL otherwise (for keyboard activation). + Mouse coordinates are adjusted to be relative to the cell. + + @since 2.9.3 + + @note Do not confuse this method with item activation in wxDataViewCtrl + and the wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. That one is + used for activating the item (or, to put it differently, the + entire row) similarly to analogous messages in wxTreeCtrl and + wxListCtrl, and the effect differs (play a song, open a file + etc.). Cell activation, on the other hand, is all about + interacting with the individual cell. + + @see CreateEditorCtrl() */ - virtual bool Activate( wxRect cell, - wxDataViewModel* model, - const wxDataViewItem & item, - unsigned int col ); + virtual bool ActivateCell(const wxRect& cell, + wxDataViewModel* model, + const wxDataViewItem & item, + unsigned int col, + const wxMouseEvent *mouseEvent); /** Override this to create the actual editor control once editing is about to start. - @a parent is the parent of the editor control, @a labelRect indicates the - position and size of the editor control and @a value is its initial value: + This method will only be called if the cell has the + wxDATAVIEW_CELL_EDITABLE mode. Editing is typically triggered by slowly + double-clicking the cell or by a platform-dependent keyboard shortcut + (F2 is typical on Windows, Space and/or Enter is common elsewhere and + supported on Windows too). + + @param parent + The parent of the editor control. + @param labelRect + Indicates the position and size of the editor control. The control + should be created in place of the cell and @a labelRect should be + respected as much as possible. + @param value + Initial value of the editor. + + An example: @code { long l = value; @@ -1464,10 +1883,12 @@ public: labelRect.GetTopLeft(), labelRect.GetSize(), 0, 0, 100, l ); } @endcode + + @see ActivateCell() */ - virtual wxControl* CreateEditorCtrl(wxWindow* parent, - wxRect labelRect, - const wxVariant& value); + virtual wxWindow* CreateEditorCtrl(wxWindow* parent, + wxRect labelRect, + const wxVariant& value); /** Return the attribute to be used for rendering. @@ -1502,7 +1923,7 @@ public: } @endcode */ - virtual bool GetValueFromEditorCtrl(wxControl* editor, + virtual bool GetValueFromEditorCtrl(wxWindow* editor, wxVariant& value); /** @@ -1515,8 +1936,8 @@ public: Override this to react to a left click. This method will only be called in @c wxDATAVIEW_CELL_ACTIVATABLE mode. */ - virtual bool LeftClick( wxPoint cursor, - wxRect cell, + virtual bool LeftClick( const wxPoint& cursor, + const wxRect& cell, wxDataViewModel * model, const wxDataViewItem & item, unsigned int col ); @@ -1540,7 +1961,8 @@ public: /** Override this to start a drag operation. Not yet supported. */ - virtual bool StartDrag(wxPoint cursor, wxRect cell, + virtual bool StartDrag(const wxPoint& cursor, + const wxRect& cell, wxDataViewModel* model, const wxDataViewItem & item, unsigned int col); @@ -1738,6 +2160,64 @@ public: const wxDataViewListStore *GetStore() const; //@} + /** + Returns the position of given @e item or wxNOT_FOUND if it's + not a valid item. + + @since 2.9.2 + */ + int ItemToRow(const wxDataViewItem &item) const; + + /** + Returns the wxDataViewItem at the given @e row. + + @since 2.9.2 + */ + wxDataViewItem RowToItem(int row) const; + + //@{ + /** + @name Selection handling functions + */ + + /** + Returns index of the selected row or wxNOT_FOUND. + + @see wxDataViewCtrl::GetSelection() + + @since 2.9.2 + */ + int GetSelectedRow() const; + + /** + Selects given row. + + @see wxDataViewCtrl::Select() + + @since 2.9.2 + */ + void SelectRow(unsigned row); + + /** + Unselects given row. + + @see wxDataViewCtrl::Unselect() + + @since 2.9.2 + */ + void UnselectRow(unsigned row); + + /** + Returns true if @a row is selected. + + @see wxDataViewCtrl::IsSelected() + + @since 2.9.2 + */ + bool IsRowSelected(unsigned row) const; + + //@} + /** @name Column management functions */ @@ -1747,7 +2227,7 @@ public: Appends a column to the control and additionally appends a column to the store with the type string. */ - virtual void AppendColumn( wxDataViewColumn *column ); + virtual bool AppendColumn( wxDataViewColumn *column ); /** Appends a column to the control and additionally appends a @@ -1803,7 +2283,7 @@ public: Inserts a column to the control and additionally inserts a column to the store with the type string. */ - virtual void InsertColumn( unsigned int pos, wxDataViewColumn *column ); + virtual bool InsertColumn( unsigned int pos, wxDataViewColumn *column ); /** Inserts a column to the control and additionally inserts a @@ -1816,7 +2296,7 @@ public: Prepends a column to the control and additionally prepends a column to the store with the type string. */ - virtual void PrependColumn( wxDataViewColumn *column ); + virtual bool PrependColumn( wxDataViewColumn *column ); /** Prepends a column to the control and additionally prepends a @@ -1835,17 +2315,17 @@ public: /** Appends an item (=row) to the control and store. */ - void AppendItem( const wxVector &values, wxClientData *data = NULL ); + void AppendItem( const wxVector &values, wxUIntPtr data = NULL ); /** Prepends an item (=row) to the control and store. */ - void PrependItem( const wxVector &values, wxClientData *data = NULL ); + void PrependItem( const wxVector &values, wxUIntPtr data = NULL ); /** Inserts an item (=row) to the control and store. */ - void InsertItem( unsigned int row, const wxVector &values, wxClientData *data = NULL ); + void InsertItem( unsigned int row, const wxVector &values, wxUIntPtr data = NULL ); /** Delete the row at position @a row. @@ -1857,6 +2337,22 @@ public: */ void DeleteAllItems(); + /** + Returns the number of items (=rows) in the control + + @since 2.9.4 + */ + unsigned int GetItemCount() const; + + /** + Returns the client data associated with the item. + + @see SetItemData() + + @since 2.9.4 + */ + wxUIntPtr GetItemData(const wxDataViewItem& item) const; + /** Sets the value in the store and update the control. */ @@ -1870,7 +2366,7 @@ public: /** Sets the value in the store and update the control. - This method assumes that the a string is stored in respective + This method assumes that the string is stored in respective column. */ void SetTextValue( const wxString &value, unsigned int row, unsigned int col ); @@ -1878,7 +2374,7 @@ public: /** Returns the value from the store. - This method assumes that the a string is stored in respective + This method assumes that the string is stored in respective column. */ wxString GetTextValue( unsigned int row, unsigned int col ) const; @@ -1886,7 +2382,7 @@ public: /** Sets the value in the store and update the control. - This method assumes that the a boolean value is stored in + This method assumes that the boolean value is stored in respective column. */ void SetToggleValue( bool value, unsigned int row, unsigned int col ); @@ -1894,11 +2390,24 @@ public: /** Returns the value from the store. - This method assumes that the a boolean value is stored in + This method assumes that the boolean value is stored in respective column. */ bool GetToggleValue( unsigned int row, unsigned int col ) const; + /** + Associates a client data pointer with the given item. + + Notice that the control does @e not take ownership of the pointer for + compatibility with wxListCtrl. I.e. it will @e not delete the pointer + (if it is a pointer and not a number) itself, it is up to you to do it. + + @see GetItemData() + + @since 2.9.4 + */ + void SetItemData(const wxDataViewItem& item, wxUIntPtr data); + //@} }; @@ -2178,7 +2687,7 @@ public: in number and type. No (default) values are filled in automatically. */ - void AppendItem( const wxVector &values, wxClientData *data = NULL ); + void AppendItem( const wxVector &values, wxUIntPtr data = NULL ); /** Prepends an item (=row) and fills it with @a values. @@ -2187,7 +2696,7 @@ public: in number and type. No (default) values are filled in automatically. */ - void PrependItem( const wxVector &values, wxClientData *data = NULL ); + void PrependItem( const wxVector &values, wxUIntPtr data = NULL ); /** Inserts an item (=row) and fills it with @a values. @@ -2196,7 +2705,7 @@ public: in number and type. No (default) values are filled in automatically. */ - void InsertItem( unsigned int row, const wxVector &values, wxClientData *data = NULL ); + void InsertItem( unsigned int row, const wxVector &values, wxUIntPtr data = NULL ); /** Delete the item (=row) at position @a pos. @@ -2209,23 +2718,51 @@ public: void DeleteAllItems(); /** - Overriden from wxDataViewModel + Returns the number of items (=rows) in the control + + @since 2.9.4 + */ + unsigned int GetItemCount() const; + + /** + Returns the client data associated with the item. + + @see SetItemData() + + @since 2.9.4 + */ + wxUIntPtr GetItemData(const wxDataViewItem& item) const; + + /** + Overridden from wxDataViewModel */ virtual unsigned int GetColumnCount() const; /** - Overriden from wxDataViewModel + Overridden from wxDataViewModel */ virtual wxString GetColumnType( unsigned int col ) const; /** - Overriden from wxDataViewIndexListModel + Sets the client data associated with the item. + + Notice that this class does @e not take ownership of the passed in + pointer and will not delete it. + + @see GetItemData() + + @since 2.9.4 + */ + void SetItemData(const wxDataViewItem& item, wxUIntPtr data); + + /** + Overridden from wxDataViewIndexListModel */ virtual void GetValueByRow( wxVariant &value, unsigned int row, unsigned int col ) const; /** - Overriden from wxDataViewIndexListModel + Overridden from wxDataViewIndexListModel */ virtual bool SetValueByRow( const wxVariant &value, unsigned int row, unsigned int col ); @@ -2235,7 +2772,7 @@ public: /** @class wxDataViewTreeStore - wxDataViewTreeStore is a specialised wxDataViewModel for stroing simple + wxDataViewTreeStore is a specialised wxDataViewModel for storing simple trees very much like wxTreeCtrl does and it offers a similar API. This class actually stores the entire tree and the values (therefore its name) @@ -2297,7 +2834,7 @@ public: int GetChildCount(const wxDataViewItem& parent) const; /** - Returns the client data asoociated with the item. + Returns the client data associated with the item. */ wxClientData* GetItemData(const wxDataViewItem& item) const; @@ -2447,13 +2984,15 @@ public: @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event. @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)} - Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event. + Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICK event. @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICKED event. @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED event. @event{EVT_DATAVIEW_COLUMN_REORDERED(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED event. + Currently this even is only generated when using the native OSX + version. @event{EVT_DATAVIEW_ITEM_BEGIN_DRAG(id, func)} Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG event. @event{EVT_DATAVIEW_ITEM_DROP_POSSIBLE(id, func)} @@ -2494,7 +3033,7 @@ public: wxDataViewModel* GetModel() const; /** - Returns a the position of a context menu event in screen coordinates. + Returns the position of a context menu event in screen coordinates. */ wxPoint GetPosition() const; @@ -2503,13 +3042,33 @@ public: */ const wxVariant& GetValue() const; + /** + Can be used to determine whether the new value is going to be accepted + in wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE handler. + + Returns @true if editing the item was cancelled or if the user tried to + enter an invalid value (refused by wxDataViewRenderer::Validate()). If + this method returns @false, it means that the value in the model is + about to be changed to the new one. + + Notice that wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE event handler can + call wxNotifyEvent::Veto() to prevent this from happening. + + Currently support for setting this field and for vetoing the change is + only available in the generic version of wxDataViewCtrl, i.e. under MSW + but not GTK nor OS X. + + @since 2.9.3 + */ + bool IsEditCancelled() const; + /** Sets the column index associated with this event. */ void SetColumn(int col); /** - For wxEVT_DATAVIEW_COLUMN_HEADER_CLICKED only. + For @c wxEVT_DATAVIEW_COLUMN_HEADER_CLICK only. */ void SetDataViewColumn(wxDataViewColumn* col); @@ -2528,41 +3087,55 @@ public: */ void SetDataObject( wxDataObject *obj ); - /** - Used internally. Gets associated wxDataObject for data transfer - within a drag operation. - */ - wxDataObject *GetDataObject() const; - - /** - Used internally. Sets the wxDataFormat during a drop operation. - */ - void SetDataFormat( const wxDataFormat &format ); - /** Gets the wxDataFormat during a drop operation. */ wxDataFormat GetDataFormat() const; /** - Used internally. Sets the data size for a drop data transfer. + Gets the data size for a drop data transfer. */ - void SetDataSize( size_t size ); + size_t GetDataSize() const; /** - Gets the data size for a drop data transfer. + Gets the data buffer for a drop data transfer. */ - size_t GetDataSize() const; + void *GetDataBuffer() const; /** - Used internally. Sets the data buffer for a drop data transfer. + Specify the kind of the drag operation to perform. + + This method can be used inside a wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG + handler in order to configure the drag operation. Valid values are + ::wxDrag_CopyOnly (default), ::wxDrag_AllowMove (allow the data to be + moved) and ::wxDrag_DefaultMove. + + Currently it is only honoured by the generic version of wxDataViewCtrl + (used e.g. under MSW) and not supported by the native GTK and OS X + versions. + + @see GetDropEffect() + + @since 2.9.4 */ - void SetDataBuffer( void* buf ); + void SetDragFlags(int flags); /** - Gets the data buffer for a drop data transfer. + Returns the effect the user requested to happen to the dropped data. + + This function can be used inside + wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE and + wxEVT_COMMAND_DATAVIEW_ITEM_DROP handlers and returns whether the user + is trying to copy (the return value is ::wxDragCopy) or move (if the + return value is ::wxDragMove) the data. + + Currently this is only available when using the generic version of + wxDataViewCtrl (used e.g. under MSW) and always returns ::wxDragNone in + the GTK and OS X native versions. + + @since 2.9.4 */ - void *GetDataBuffer() const; + wxDragResult GetDropEffect() const; /** Return the first row that will be displayed.