X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/427c415b933075ab9be91d7116c6db80858e0b78..36a0190ebd5bd9a7302f60f6dcd608b80574e21c:/interface/wx/image.h diff --git a/interface/wx/image.h b/interface/wx/image.h index f1bd3ffc02..9ae1bb0a06 100644 --- a/interface/wx/image.h +++ b/interface/wx/image.h @@ -2,10 +2,128 @@ // Name: image.h // Purpose: interface of wxImageHandler and wxImage // Author: wxWidgets team -// RCS-ID: $Id$ -// Licence: wxWindows license +// Licence: wxWindows licence ///////////////////////////////////////////////////////////////////////////// +/** + Possible values for the image resolution option. + + @see wxImage::GetOptionInt(). + */ +enum wxImageResolution +{ + /// Resolution not specified. + wxIMAGE_RESOLUTION_NONE = 0, + + /// Resolution specified in inches. + wxIMAGE_RESOLUTION_INCHES = 1, + + /// Resolution specified in centimetres. + wxIMAGE_RESOLUTION_CM = 2 +}; + +/** + Image resize algorithm. + + This is used with wxImage::Scale() and wxImage::Rescale(). + */ +enum wxImageResizeQuality +{ + /// Simplest and fastest algorithm. + wxIMAGE_QUALITY_NEAREST, + + /// Compromise between wxIMAGE_QUALITY_NEAREST and wxIMAGE_QUALITY_BICUBIC. + wxIMAGE_QUALITY_BILINEAR, + + /// Highest quality but slowest execution time. + wxIMAGE_QUALITY_BICUBIC, + + /** + Use surrounding pixels to calculate an average that will be used for + new pixels. This method is typically used when reducing the size of + an image. + */ + wxIMAGE_QUALITY_BOX_AVERAGE, + + /** + Default image resizing algorithm used by wxImage::Scale(). Currently + the same as wxIMAGE_QUALITY_NEAREST. + */ + wxIMAGE_QUALITY_NORMAL, + + /** + Best image resizing algorithm. Since version 2.9.2 this results in + wxIMAGE_QUALITY_BOX_AVERAGE being used when reducing the size of the + image (meaning that both the new width and height will be smaller than + the original size). Otherwise wxIMAGE_QUALITY_BICUBIC is used. + */ + wxIMAGE_QUALITY_HIGH +}; + +/** + Possible values for PNG image type option. + + @see wxImage::GetOptionInt(). + */ +enum wxImagePNGType +{ + wxPNG_TYPE_COLOUR = 0, ///< Colour PNG image. + wxPNG_TYPE_GREY = 2, ///< Greyscale PNG image converted from RGB. + wxPNG_TYPE_GREY_RED = 3, ///< Greyscale PNG image using red as grey. + wxPNG_TYPE_PALETTE = 4 ///< Palette encoding. +}; + + +/** + Image option names. +*/ +#define wxIMAGE_OPTION_QUALITY wxString("quality") +#define wxIMAGE_OPTION_FILENAME wxString("FileName") +#define wxIMAGE_OPTION_RESOLUTION wxString("Resolution") +#define wxIMAGE_OPTION_RESOLUTIONX wxString("ResolutionX") +#define wxIMAGE_OPTION_RESOLUTIONY wxString("ResolutionY") +#define wxIMAGE_OPTION_RESOLUTIONUNIT wxString("ResolutionUnit") +#define wxIMAGE_OPTION_MAX_WIDTH wxString("MaxWidth") +#define wxIMAGE_OPTION_MAX_HEIGHT wxString("MaxHeight") +#define wxIMAGE_OPTION_ORIGINAL_WIDTH wxString("OriginalWidth") +#define wxIMAGE_OPTION_ORIGINAL_HEIGHT wxString("OriginalHeight") + +#define wxIMAGE_OPTION_BMP_FORMAT wxString("wxBMP_FORMAT") +#define wxIMAGE_OPTION_CUR_HOTSPOT_X wxString("HotSpotX") +#define wxIMAGE_OPTION_CUR_HOTSPOT_Y wxString("HotSpotY") + +#define wxIMAGE_OPTION_GIF_COMMENT wxString("GifComment") + +#define wxIMAGE_OPTION_PNG_FORMAT wxString("PngFormat") +#define wxIMAGE_OPTION_PNG_BITDEPTH wxString("PngBitDepth") +#define wxIMAGE_OPTION_PNG_FILTER wxString("PngF") +#define wxIMAGE_OPTION_PNG_COMPRESSION_LEVEL wxString("PngZL") +#define wxIMAGE_OPTION_PNG_COMPRESSION_MEM_LEVEL wxString("PngZM") +#define wxIMAGE_OPTION_PNG_COMPRESSION_STRATEGY wxString("PngZS") +#define wxIMAGE_OPTION_PNG_COMPRESSION_BUFFER_SIZE wxString("PngZB") + +#define wxIMAGE_OPTION_TIFF_BITSPERSAMPLE wxString("BitsPerSample") +#define wxIMAGE_OPTION_TIFF_SAMPLESPERPIXEL wxString("SamplesPerPixel") +#define wxIMAGE_OPTION_TIFF_COMPRESSION wxString("Compression") +#define wxIMAGE_OPTION_TIFF_PHOTOMETRIC wxString("Photometric") +#define wxIMAGE_OPTION_TIFF_IMAGEDESCRIPTOR wxString("ImageDescriptor") + + +enum +{ + wxBMP_24BPP = 24, // default, do not need to set + //wxBMP_16BPP = 16, // wxQuantize can only do 236 colors? + wxBMP_8BPP = 8, // 8bpp, quantized colors + wxBMP_8BPP_GREY = 9, // 8bpp, rgb averaged to greys + wxBMP_8BPP_GRAY = wxBMP_8BPP_GREY, + wxBMP_8BPP_RED = 10, // 8bpp, red used as greyscale + wxBMP_8BPP_PALETTE = 11, // 8bpp, use the wxImage's palette + wxBMP_4BPP = 4, // 4bpp, quantized colors + wxBMP_1BPP = 1, // 1bpp, quantized "colors" + wxBMP_1BPP_BW = 2 // 1bpp, black & white from red +}; + + /** @class wxImageHandler @@ -15,7 +133,7 @@ If you wish to extend the capabilities of wxImage, derive a class from wxImageHandler and add the handler using wxImage::AddHandler in your - application initialisation. + application initialization. Note that all wxImageHandlers provided by wxWidgets are part of the @ref page_libs_wxcore library. @@ -34,7 +152,7 @@ ::wxNullImage @library{wxcore} - @category{misc} + @category{gdi} @see wxImage, wxInitAllImageHandlers() */ @@ -55,10 +173,41 @@ public: virtual ~wxImageHandler(); /** - Gets the file extension associated with this handler. + Returns @true if this handler supports the image format contained in the + given stream. + + This function doesn't modify the current stream position (because it + restores the original position before returning; this however requires the + stream to be seekable; see wxStreamBase::IsSeekable). + */ + bool CanRead( wxInputStream& stream ); + + /** + Returns @true if this handler supports the image format contained in the + file with the given name. + + This function doesn't modify the current stream position (because it + restores the original position before returning; this however requires the + stream to be seekable; see wxStreamBase::IsSeekable). + */ + bool CanRead( const wxString& filename ); + + /** + Gets the preferred file extension associated with this handler. + + @see GetAltExtensions() */ const wxString& GetExtension() const; + /** + Returns the other file extensions associated with this handler. + + The preferred extension for this handler is returned by GetExtension(). + + @since 2.9.0 + */ + const wxArrayString& GetAltExtensions() const; + /** If the image file contains more than one image and the image handler is capable of retrieving these individually, this function will return the number of @@ -66,10 +215,14 @@ public: @param stream Opened input stream for reading image data. - Currently, the stream must support seeking. + This function doesn't modify the current stream position (because it + restores the original position before returning; this however requires the + stream to be seekable; see wxStreamBase::IsSeekable). @return Number of available images. For most image handlers, this is 1 - (exceptions are TIFF and ICO formats). + (exceptions are TIFF and ICO formats as well as animated GIFs + for which this function returns the number of frames in the + animation). */ virtual int GetImageCount(wxInputStream& stream); @@ -109,8 +262,8 @@ public: @see wxImage::LoadFile, wxImage::SaveFile, SaveFile() */ - bool LoadFile(wxImage* image, wxInputStream& stream, - bool verbose = true, int index = 0); + virtual bool LoadFile(wxImage* image, wxInputStream& stream, + bool verbose = true, int index = -1); /** Saves a image in the output stream. @@ -119,21 +272,39 @@ public: The image object which is to be affected by this operation. @param stream Opened output stream for writing the data. + @param verbose + If set to @true, errors reported by the image handler will produce + wxLogMessages. @return @true if the operation succeeded, @false otherwise. @see wxImage::LoadFile, wxImage::SaveFile, LoadFile() */ - bool SaveFile(wxImage* image, wxOutputStream& stream); + virtual bool SaveFile(wxImage* image, wxOutputStream& stream, + bool verbose = true); /** - Sets the handler extension. + Sets the preferred file extension associated with this handler. @param extension - Handler extension. + File extension without leading dot. + + @see SetAltExtensions() */ void SetExtension(const wxString& extension); + /** + Sets the alternative file extensions associated with this handler. + + @param extensions + Array of file extensions. + + @see SetExtension() + + @since 2.9.0 + */ + void SetAltExtensions(const wxArrayString& extensions); + /** Sets the handler MIME type. @@ -149,6 +320,38 @@ public: Handler name. */ void SetName(const wxString& name); + + /** + Retrieve the version information about the image library used by this + handler. + + This method is not present in wxImageHandler class itself but is + present in a few of the classes deriving from it, currently + wxJPEGHandler, wxPNGHandler and wxTIFFHandler. It returns the + information about the version of the image library being used for the + corresponding handler implementation. + + @since 2.9.2 + */ + static wxVersionInfo GetLibraryVersionInfo(); + +protected: + /** + Called to get the number of images available in a multi-image file + type, if supported. + + NOTE: this function is allowed to change the current stream position + since GetImageCount() will take care of restoring it later + */ + virtual int DoGetImageCount( wxInputStream& stream ); + + /** + Called to test if this handler can read an image from the given stream. + + NOTE: this function is allowed to change the current stream position + since CallDoCanRead() will take care of restoring it later + */ + virtual bool DoCanRead( wxInputStream& stream ) = 0; }; @@ -164,6 +367,9 @@ const unsigned char wxIMAGE_ALPHA_TRANSPARENT = 0; */ const unsigned char wxIMAGE_ALPHA_OPAQUE = 0xff; +const unsigned char wxIMAGE_ALPHA_THRESHOLD = 0x80; + + /** @class wxImage @@ -179,6 +385,17 @@ const unsigned char wxIMAGE_ALPHA_OPAQUE = 0xff; the wxBitmap::wxBitmap(wxImage,int depth) constructor. This bitmap can then be drawn in a device context, using wxDC::DrawBitmap. + More on the difference between wxImage and wxBitmap: wxImage is just a + buffer of RGB bytes with an optional buffer for the alpha bytes. It is all + generic, platform independent and image file format independent code. It + includes generic code for scaling, resizing, clipping, and other manipulations + of the image data. OTOH, wxBitmap is intended to be a wrapper of whatever is + the native image format that is quickest/easiest to draw to a DC or to be the + target of the drawing operations performed on a wxMemoryDC. By splitting the + responsibilities between wxImage/wxBitmap like this then it's easier to use + generic code shared by all platforms and image types for generic operations and + platform specific code where performance or compatibility is needed. + One colour value of the image may be used as a mask colour which will lead to the automatic creation of a wxMask object associated to the bitmap object. @@ -194,12 +411,14 @@ const unsigned char wxIMAGE_ALPHA_OPAQUE = 0xff; The constants ::wxIMAGE_ALPHA_TRANSPARENT and ::wxIMAGE_ALPHA_OPAQUE can be used to indicate those values in a more readable form. - Unlike RGB data, not all images have an alpha channel and before using - wxImage::GetAlpha you should check if this image contains an alpha channel - with wxImage::HasAlpha. Note that currently only the PNG format has full - alpha channel support so only the images loaded from PNG files can have - alpha and, if you initialize the image alpha channel yourself using - wxImage::SetAlpha, you should save it in PNG format to avoid losing it. + While all images have RGB data, not all images have an alpha channel. Before + using wxImage::GetAlpha you should check if this image contains an alpha + channel with wxImage::HasAlpha. Currently the BMP, PNG, TGA, and TIFF format + handlers have full alpha channel support for loading so if you want to use + alpha you have to use one of these formats. If you initialize the image + alpha channel yourself using wxImage::SetAlpha, you should save it in + either PNG, TGA, or TIFF format to avoid losing it as these are the only + handlers that currently support saving with alpha. @section image_handlers Available image handlers @@ -209,14 +428,14 @@ const unsigned char wxIMAGE_ALPHA_OPAQUE = 0xff; To use other image formats, install the appropriate handler with wxImage::AddHandler or call ::wxInitAllImageHandlers(). - - wxBMPHandler: For loading and saving, always installed. - - wxPNGHandler: For loading (including alpha support) and saving. + - wxBMPHandler: For loading (including alpha support) and saving, always installed. + - wxPNGHandler: For loading and saving. Includes alpha support. - wxJPEGHandler: For loading and saving. - - wxGIFHandler: Only for loading, due to legal issues. + - wxGIFHandler: For loading and saving (see below). - wxPCXHandler: For loading and saving (see below). - wxPNMHandler: For loading and saving (see below). - - wxTIFFHandler: For loading and saving. - - wxTGAHandler: For loading only. + - wxTIFFHandler: For loading and saving. Includes alpha support. + - wxTGAHandler: For loading and saving. Includes alpha support. - wxIFFHandler: For loading only. - wxXPMHandler: For loading and saving. - wxICOHandler: For loading and saving. @@ -230,6 +449,8 @@ const unsigned char wxIMAGE_ALPHA_OPAQUE = 0xff; Loading PNMs only works for ASCII or raw RGB images. When saving in PNM format, wxPNMHandler will always save as raw RGB. + Saving GIFs requires images of maximum 8 bpp (see wxQuantize), and the alpha channel converted to a mask (see wxImage::ConvertAlphaToMask). + Saving an animated GIF requires images of the same size (see wxGIFHandler::SaveAnimation) @library{wxcore} @category{gdi} @@ -242,6 +463,10 @@ const unsigned char wxIMAGE_ALPHA_OPAQUE = 0xff; class wxImage : public wxObject { public: + /** + A simple class which stores red, green and blue values as 8 bit unsigned integers + in the range of 0-255. + */ class RGBValue { public: @@ -249,12 +474,19 @@ public: Constructor for RGBValue, an object that contains values for red, green and blue which represent the value of a color. - It is used by wxImage::HSVtoRGB and wxImage::RGBtoHSV, which converts + It is used by wxImage::HSVtoRGB and wxImage::RGBtoHSV, which convert between HSV color space and RGB color space. */ RGBValue(unsigned char r=0, unsigned char g=0, unsigned char b=0); + + unsigned char red; + unsigned char green; + unsigned char blue; }; + /** + A simple class which stores hue, saturation and value as doubles in the range 0.0-1.0. + */ class HSVValue { public: @@ -262,10 +494,14 @@ public: Constructor for HSVValue, an object that contains values for hue, saturation and value which represent the value of a color. - It is used by wxImage::HSVtoRGB() and wxImage::RGBtoHSV(), which converts + It is used by wxImage::HSVtoRGB() and wxImage::RGBtoHSV(), which convert between HSV color space and RGB color space. */ HSVValue(double h=0.0, double s=0.0, double v=0.0); + + double hue; + double saturation; + double value; }; /** @@ -287,6 +523,11 @@ public: */ wxImage(int width, int height, bool clear = true); + /** + @overload + */ + wxImage(const wxSize& sz, bool clear = true); + /** Creates an image from data in memory. If @a static_data is @false then the wxImage will take ownership of the data and free it @@ -302,7 +543,12 @@ public: Indicates if the data should be free'd after use */ - wxImage(int width, int height, unsigned char* data, bool static_data = false); + wxImage(int width, int height, unsigned char* data, bool static_data = false); + + /** + @overload + */ + wxImage(const wxSize& sz, unsigned char* data, bool static_data = false); /** Creates an image from data in memory. If @a static_data is @false @@ -324,11 +570,21 @@ public: wxImage(int width, int height, unsigned char* data, unsigned char* alpha, bool static_data = false ); + /** + @overload + */ + wxImage(const wxSize& sz, unsigned char* data, unsigned char* alpha, + bool static_data = false); + /** Creates an image from XPM data. @param xpmData A pointer to XPM image data. + + @beginWxPerlOnly + Not supported by wxPerl. + @endWxPerlOnly */ wxImage(const char* const* xpmData); @@ -345,7 +601,7 @@ public: @li wxBITMAP_TYPE_PNG: Load a PNG bitmap file. @li wxBITMAP_TYPE_PCX: Load a PCX bitmap file. @li wxBITMAP_TYPE_PNM: Load a PNM bitmap file. - @li wxBITMAP_TYPE_TIF: Load a TIFF bitmap file. + @li wxBITMAP_TYPE_TIFF: Load a TIFF bitmap file. @li wxBITMAP_TYPE_TGA: Load a TGA bitmap file. @li wxBITMAP_TYPE_XPM: Load a XPM bitmap file. @li wxBITMAP_TYPE_ICO: Load a Windows icon file (ICO). @@ -413,7 +669,6 @@ public: */ wxImage(wxInputStream& stream, const wxString& mimetype, int index = -1); - /** Destructor. @@ -422,214 +677,407 @@ public: */ virtual ~wxImage(); + + /** - Register an image handler. + @name Image creation, initialization and deletion functions */ - static void AddHandler(wxImageHandler* handler); + //@{ /** - Blurs the image in both horizontal and vertical directions by the - specified pixel @a blurRadius. This should not be used when using - a single mask colour for transparency. - - @see BlurHorizontal(), BlurVertical() + Returns an identical copy of this image. */ - wxImage Blur(int blurRadius) const; + wxImage Copy() const; /** - Blurs the image in the horizontal direction only. This should not be used - when using a single mask colour for transparency. + Creates a fresh image. + See wxImage::wxImage(int,int,bool) for more info. - @see Blur(), BlurVertical() + @return @true if the call succeeded, @false otherwise. */ - wxImage BlurHorizontal(int blurRadius) const; + bool Create(int width, int height, bool clear = true); /** - Blurs the image in the vertical direction only. This should not be used - when using a single mask colour for transparency. - - @see Blur(), BlurHorizontal() + @overload */ - wxImage BlurVertical(int blurRadius) const; + bool Create( const wxSize& sz, bool clear = true ); /** - Returns @true if the current image handlers can read this file + Creates a fresh image. + See wxImage::wxImage(int,int,unsigned char*,bool) for more info. + + @return @true if the call succeeded, @false otherwise. */ - static bool CanRead(const wxString& filename); + bool Create( int width, int height, unsigned char* data, bool static_data = false ); /** - Deletes all image handlers. - This function is called by wxWidgets on exit. + @overload */ - static void CleanUpHandlers(); + bool Create( const wxSize& sz, unsigned char* data, bool static_data = false ); /** - Computes the histogram of the image. @a histogram is a reference to - wxImageHistogram object. wxImageHistogram is a specialization of - wxHashMap "template" and is defined as follows: - - @code - class WXDLLEXPORT wxImageHistogramEntry - { - public: - wxImageHistogramEntry() : index(0), value(0) {} - unsigned long index; - unsigned long value; - }; - - WX_DECLARE_EXPORTED_HASH_MAP(unsigned long, wxImageHistogramEntry, - wxIntegerHash, wxIntegerEqual, - wxImageHistogram); - @endcode + Creates a fresh image. + See wxImage::wxImage(int,int,unsigned char*,unsigned char*,bool) for more info. - @return Returns number of colours in the histogram. + @return @true if the call succeeded, @false otherwise. */ - unsigned long ComputeHistogram(wxImageHistogram& histogram) const; + bool Create( int width, int height, unsigned char* data, unsigned char* alpha, bool static_data = false ); /** - If the image has alpha channel, this method converts it to mask. - - All pixels with alpha value less than @a threshold are replaced with mask - colour and the alpha channel is removed. Mask colour is chosen automatically - using FindFirstUnusedColour(). + @overload + */ + bool Create( const wxSize& sz, unsigned char* data, unsigned char* alpha, bool static_data = false ); - If the image image doesn't have alpha channel, ConvertAlphaToMask() does nothing. + /** + Initialize the image data with zeroes (the default) or with the + byte value given as @a value. - @return @false if FindFirstUnusedColour returns @false, @true otherwise. + @since 2.9.0 */ - bool ConvertAlphaToMask(unsigned char threshold = 128); + void Clear(unsigned char value = 0); /** - @deprecated - Use the equivalent @ref wxBitmap::wxBitmap "wxBitmap constructor" - (which takes wxImage and depth as its arguments) instead. + Destroys the image data. */ - wxBitmap ConvertToBitmap() const; + void Destroy(); /** - Returns a greyscale version of the image. + Initializes the image alpha channel data. - The returned image uses the luminance component of the original to - calculate the greyscale. Defaults to using the standard ITU-T BT.601 - when converting to YUV, where every pixel equals - (R * @a lr) + (G * @a lg) + (B * @a lb). + It is an error to call it if the image already has alpha data. + If it doesn't, alpha data will be by default initialized to all pixels + being fully opaque. But if the image has a mask colour, all mask pixels + will be completely transparent. */ - wxImage ConvertToGreyscale(double lr = 0.299, double lg = 0.587, - double lb = 0.114) const; + void InitAlpha(); - /** - Returns monochromatic version of the image. + //@} - The returned image has white colour where the original has @e (r,g,b) - colour and black colour everywhere else. + + /** + @name Image manipulation functions */ - wxImage ConvertToMono(unsigned char r, unsigned char g, unsigned char b) const; + //@{ /** - Returns an identical copy of the image. + Blurs the image in both horizontal and vertical directions by the + specified pixel @a blurRadius. This should not be used when using + a single mask colour for transparency. + + @see BlurHorizontal(), BlurVertical() */ - wxImage Copy() const; + wxImage Blur(int blurRadius) const; /** - Creates a fresh image. + Blurs the image in the horizontal direction only. This should not be used + when using a single mask colour for transparency. - If @a clear is @true, the new image will be initialized to black. - Otherwise, the image data will be uninitialized. + @see Blur(), BlurVertical() + */ + wxImage BlurHorizontal(int blurRadius) const; - @param width - The width of the image in pixels. - @param height - The height of the image in pixels. - @param clear - If @true, initialize the image data with zeros. + /** + Blurs the image in the vertical direction only. This should not be used + when using a single mask colour for transparency. - @return @true if the call succeeded, @false otherwise. + @see Blur(), BlurHorizontal() */ - bool Create(int width, int height, bool clear = true); + wxImage BlurVertical(int blurRadius) const; /** - Destroys the image data. + Returns a mirrored copy of the image. + The parameter @a horizontally indicates the orientation. */ - void Destroy(); + wxImage Mirror(bool horizontally = true) const; /** - Finds the first colour that is never used in the image. - The search begins at given initial colour and continues by increasing - R, G and B components (in this order) by 1 until an unused colour is - found or the colour space exhausted. + Copy the data of the given @a image to the specified position in this image. + */ + void Paste(const wxImage& image, int x, int y); - The parameters @a r, @a g, @a b are pointers to variables to save the colour. + /** + Replaces the colour specified by @e r1,g1,b1 by the colour @e r2,g2,b2. + */ + void Replace(unsigned char r1, unsigned char g1, + unsigned char b1, unsigned char r2, + unsigned char g2, unsigned char b2); - The parameters @a startR, @a startG, @a startB define the initial values - of the colour. - The returned colour will have RGB values equal to or greater than these. + /** + Changes the size of the image in-place by scaling it: after a call to this + function,the image will have the given width and height. - @return Returns @false if there is no unused colour left, @true on success. + For a description of the @a quality parameter, see the Scale() function. + Returns the (modified) image itself. - @note - This method involves computing the histogram, which is a - computationally intensive operation. + @see Scale() */ - bool FindFirstUnusedColour(unsigned char* r, unsigned char* g, - unsigned char* b, unsigned char startR = 1, - unsigned char startG = 0, - unsigned char startB = 0) const; + wxImage& Rescale(int width, int height, + wxImageResizeQuality quality = wxIMAGE_QUALITY_NORMAL); /** - Finds the handler with the given name. + Changes the size of the image in-place without scaling it by adding either a + border with the given colour or cropping as necessary. - @param name - The handler name. + The image is pasted into a new image with the given @a size and background + colour at the position @a pos relative to the upper left of the new image. - @return A pointer to the handler if found, @NULL otherwise. + If @a red = green = blue = -1 then use either the current mask colour + if set or find, use, and set a suitable mask colour for any newly exposed + areas. - @see wxImageHandler + @return The (modified) image itself. + + @see Size() */ - static wxImageHandler* FindHandler(const wxString& name); + wxImage& Resize(const wxSize& size, const wxPoint& pos, int red = -1, + int green = -1, int blue = -1); /** - Finds the handler associated with the given extension and type. + Rotates the image about the given point, by @a angle radians. - @param extension - The file extension, such as "bmp". - @param imageType - The image type; one of the ::wxBitmapType values. + Passing @true to @a interpolating results in better image quality, but is slower. - @return A pointer to the handler if found, @NULL otherwise. + If the image has a mask, then the mask colour is used for the uncovered + pixels in the rotated image background. Else, black (rgb 0, 0, 0) will be used. - @see wxImageHandler + Returns the rotated image, leaving this image intact. */ - static wxImageHandler* FindHandler(const wxString& extension, - wxBitmapType imageType); + wxImage Rotate(double angle, const wxPoint& rotationCentre, + bool interpolating = true, + wxPoint* offsetAfterRotation = NULL) const; /** - Finds the handler associated with the given image type. + Returns a copy of the image rotated 90 degrees in the direction + indicated by @a clockwise. + */ + wxImage Rotate90(bool clockwise = true) const; - @param imageType - The image type; one of the ::wxBitmapType values. + /** + Returns a copy of the image rotated by 180 degrees. - @return A pointer to the handler if found, @NULL otherwise. + @since 2.9.2 + */ + wxImage Rotate180() const; - @see wxImageHandler + /** + Rotates the hue of each pixel in the image by @e angle, which is a double in + the range of -1.0 to +1.0, where -1.0 corresponds to -360 degrees and +1.0 + corresponds to +360 degrees. */ - static wxImageHandler* FindHandler(wxBitmapType imageType); + void RotateHue(double angle); /** - Finds the handler associated with the given MIME type. + Returns a scaled version of the image. - @param mimetype - MIME type. + This is also useful for scaling bitmaps in general as the only other way + to scale bitmaps is to blit a wxMemoryDC into another wxMemoryDC. - @return A pointer to the handler if found, @NULL otherwise. + The parameter @a quality determines what method to use for resampling + the image, see wxImageResizeQuality documentation. - @see wxImageHandler + It should be noted that although using @c wxIMAGE_QUALITY_HIGH produces much nicer + looking results it is a slower method. Downsampling will use the box averaging + method which seems to operate very fast. If you are upsampling larger images using + this method you will most likely notice that it is a bit slower and in extreme + cases it will be quite substantially slower as the bicubic algorithm has to process a + lot of data. + + It should also be noted that the high quality scaling may not work as expected + when using a single mask colour for transparency, as the scaling will blur the + image and will therefore remove the mask partially. Using the alpha channel + will work. + + Example: + @code + // get the bitmap from somewhere + wxBitmap bmp = ...; + + // rescale it to have size of 32*32 + if ( bmp.GetWidth() != 32 || bmp.GetHeight() != 32 ) + { + wxImage image = bmp.ConvertToImage(); + bmp = wxBitmap(image.Scale(32, 32)); + + // another possibility: + image.Rescale(32, 32); + bmp = image; + } + @endcode + + @see Rescale() */ - static wxImageHandler* FindHandlerMime(const wxString& mimetype); + wxImage Scale(int width, int height, + wxImageResizeQuality quality = wxIMAGE_QUALITY_NORMAL) const; /** - Return alpha value at given pixel location. + Returns a resized version of this image without scaling it by adding either a + border with the given colour or cropping as necessary. + + The image is pasted into a new image with the given @a size and background + colour at the position @a pos relative to the upper left of the new image. + + If @a red = green = blue = -1 then the areas of the larger image not covered + by this image are made transparent by filling them with the image mask colour + (which will be allocated automatically if it isn't currently set). + + Otherwise, the areas will be filled with the colour with the specified RGB components. + + @see Resize() */ - unsigned char GetAlpha(int x, int y) const; + wxImage Size(const wxSize& size, const wxPoint& pos, int red = -1, + int green = -1, int blue = -1) const; + + //@} + + + /** + @name Conversion functions + */ + //@{ + + /** + If the image has alpha channel, this method converts it to mask. + + If the image has an alpha channel, all pixels with alpha value less + than @a threshold are replaced with the mask colour and the alpha + channel is removed. Otherwise nothing is done. + + The mask colour is chosen automatically using + FindFirstUnusedColour() by this function, see the overload below if you + this is not appropriate. + + @return Returns @true on success, @false on error. + */ + bool ConvertAlphaToMask(unsigned char threshold = wxIMAGE_ALPHA_THRESHOLD); + + /** + If the image has alpha channel, this method converts it to mask using + the specified colour as the mask colour. + + If the image has an alpha channel, all pixels with alpha value less + than @a threshold are replaced with the mask colour and the alpha + channel is removed. Otherwise nothing is done. + + @since 2.9.0 + + @param mr + The red component of the mask colour. + @param mg + The green component of the mask colour. + @param mb + The blue component of the mask colour. + @param threshold + Pixels with alpha channel values below the given threshold are + considered to be transparent, i.e. the corresponding mask pixels + are set. Pixels with the alpha values above the threshold are + considered to be opaque. + + @return Returns @true on success, @false on error. + */ + bool ConvertAlphaToMask(unsigned char mr, unsigned char mg, unsigned char mb, + unsigned char threshold = wxIMAGE_ALPHA_THRESHOLD); + + /** + Returns a greyscale version of the image. + + The returned image uses the luminance component of the original to + calculate the greyscale. Defaults to using the standard ITU-T BT.601 + when converting to YUV, where every pixel equals + (R * @a weight_r) + (G * @a weight_g) + (B * @a weight_b). + */ + wxImage ConvertToGreyscale(double weight_r, double weight_g, double weight_b) const; + + /** + Returns a greyscale version of the image. + @since 2.9.0 + */ + wxImage ConvertToGreyscale() const; + + /** + Returns monochromatic version of the image. + + The returned image has white colour where the original has @e (r,g,b) + colour and black colour everywhere else. + */ + wxImage ConvertToMono(unsigned char r, unsigned char g, unsigned char b) const; + + /** + Returns disabled (dimmed) version of the image. + @since 2.9.0 + */ + wxImage ConvertToDisabled(unsigned char brightness = 255) const; + + //@} + + + /** + @name Miscellaneous functions + */ + //@{ + + /** + Computes the histogram of the image. @a histogram is a reference to + wxImageHistogram object. wxImageHistogram is a specialization of + wxHashMap "template" and is defined as follows: + + @code + class WXDLLEXPORT wxImageHistogramEntry + { + public: + wxImageHistogramEntry() : index(0), value(0) {} + unsigned long index; + unsigned long value; + }; + + WX_DECLARE_EXPORTED_HASH_MAP(unsigned long, wxImageHistogramEntry, + wxIntegerHash, wxIntegerEqual, + wxImageHistogram); + @endcode + + @return Returns number of colours in the histogram. + */ + unsigned long ComputeHistogram(wxImageHistogram& histogram) const; + + /** + Finds the first colour that is never used in the image. + The search begins at given initial colour and continues by increasing + R, G and B components (in this order) by 1 until an unused colour is + found or the colour space exhausted. + + The parameters @a r, @a g, @a b are pointers to variables to save the colour. + + The parameters @a startR, @a startG, @a startB define the initial values + of the colour. + The returned colour will have RGB values equal to or greater than these. + + @return Returns @false if there is no unused colour left, @true on success. + + @note + This method involves computing the histogram, which is a + computationally intensive operation. + */ + bool FindFirstUnusedColour(unsigned char* r, unsigned char* g, + unsigned char* b, unsigned char startR = 1, + unsigned char startG = 0, + unsigned char startB = 0) const; + + /** + Assignment operator, using @ref overview_refcount "reference counting". + + @param image + Image to assign. + + @return Returns 'this' object. + */ + wxImage& operator=(const wxImage& image); + + //@} + + + /** + @name Getters + */ + //@{ /** Returns pointer to the array storing the alpha values for this image. @@ -638,12 +1086,7 @@ public: does have it, this pointer may be used to directly manipulate the alpha values which are stored as the RGB ones. */ - const unsigned char * GetAlpha() const; - - /** - Returns the blue intensity at the given coordinate. - */ - unsigned char GetBlue(int x, int y) const; + unsigned char* GetAlpha() const; /** Returns the image data as an array. @@ -651,7 +1094,7 @@ public: This is most often used when doing direct image manipulation. The return value points to an array of characters in RGBRGBRGB... format in the top-to-bottom, left-to-right order, that is the first RGB triplet - corresponds to the pixel first pixel of the first row, the second one --- + corresponds to the first pixel of the first row, the second one --- to the second pixel of the first row and so on until the end of the first row, with second row following after it and so on. @@ -660,74 +1103,34 @@ public: unsigned char* GetData() const; /** - Returns the green intensity at the given coordinate. + Return alpha value at given pixel location. */ - unsigned char GetGreen(int x, int y) const; + unsigned char GetAlpha(int x, int y) const; /** - Returns the static list of image format handlers. - - @see wxImageHandler + Returns the red intensity at the given coordinate. */ - static wxList GetHandlers(); + unsigned char GetRed(int x, int y) const; /** - Gets the height of the image in pixels. + Returns the green intensity at the given coordinate. */ - int GetHeight() const; + unsigned char GetGreen(int x, int y) const; - //@{ /** - If the image file contains more than one image and the image handler is - capable of retrieving these individually, this function will return the - number of available images. - - For the overload taking the parameter @a filename, that's the name - of the file to query. - For the overload taking the parameter @a stream, that's the ppened input - stream with image data. Currently, the stream must support seeking. - - The parameter @a type may be one of the following values: - @li wxBITMAP_TYPE_BMP: Load a Windows bitmap file. - @li wxBITMAP_TYPE_GIF: Load a GIF bitmap file. - @li wxBITMAP_TYPE_JPEG: Load a JPEG bitmap file. - @li wxBITMAP_TYPE_PNG: Load a PNG bitmap file. - @li wxBITMAP_TYPE_PCX: Load a PCX bitmap file. - @li wxBITMAP_TYPE_PNM: Load a PNM bitmap file. - @li wxBITMAP_TYPE_TIF: Load a TIFF bitmap file. - @li wxBITMAP_TYPE_TGA: Load a TGA bitmap file. - @li wxBITMAP_TYPE_XPM: Load a XPM bitmap file. - @li wxBITMAP_TYPE_ICO: Load a Windows icon file (ICO). - @li wxBITMAP_TYPE_CUR: Load a Windows cursor file (CUR). - @li wxBITMAP_TYPE_ANI: Load a Windows animated cursor file (ANI). - @li wxBITMAP_TYPE_ANY: Will try to autodetect the format. - - @return Number of available images. For most image handlers, this is 1 - (exceptions are TIFF and ICO formats). + Returns the blue intensity at the given coordinate. */ - static int GetImageCount(const wxString& filename, - wxBitmapType type = wxBITMAP_TYPE_ANY); - static int GetImageCount(wxInputStream& stream, - wxBitmapType type = wxBITMAP_TYPE_ANY); - //@} + unsigned char GetBlue(int x, int y) const; /** - Iterates all registered wxImageHandler objects, and returns a string containing - file extension masks suitable for passing to file open/save dialog boxes. - - @return The format of the returned string is @c "(*.ext1;*.ext2)|*.ext1;*.ext2". - It is usually a good idea to prepend a description before passing - the result to the dialog. - Example: - @code - wxFileDialog FileDlg( this, "Choose Image", ::wxGetCwd(), "", - _("Image Files ") + wxImage::GetImageExtWildcard(), - wxFD_OPEN ); - @endcode + Gets the red value of the mask colour. + */ + unsigned char GetMaskRed() const; - @see wxImageHandler + /** + Gets the green value of the mask colour. */ - static wxString GetImageExtWildcard(); + unsigned char GetMaskGreen() const; /** Gets the blue value of the mask colour. @@ -735,39 +1138,159 @@ public: unsigned char GetMaskBlue() const; /** - Gets the green value of the mask colour. + Gets the width of the image in pixels. + + @see GetHeight(), GetSize() */ - unsigned char GetMaskGreen() const; + int GetWidth() const; /** - Gets the red value of the mask colour. + Gets the height of the image in pixels. + + @see GetWidth(), GetSize() */ - unsigned char GetMaskRed() const; + int GetHeight() const; /** - Gets a user-defined option. The function is case-insensitive to @a name. + Returns the size of the image in pixels. - For example, when saving as a JPEG file, the option @b quality is - used, which is a number between 0 and 100 (0 is terrible, 100 is very good). + @since 2.9.0 + + @see GetHeight(), GetWidth() + */ + wxSize GetSize() const; + + /** + Gets a user-defined string-valued option. + + Generic options: + @li @c wxIMAGE_OPTION_FILENAME: The name of the file from which the image + was loaded. + + Options specific to wxGIFHandler: + @li @c wxIMAGE_OPTION_GIF_COMMENT: The comment text that is read from + or written to the GIF file. In an animated GIF each frame can have + its own comment. If there is only a comment in the first frame of + a GIF it will not be repeated in other frames. + + @param name + The name of the option, case-insensitive. + @return + The value of the option or an empty string if not found. Use + HasOption() if an empty string can be a valid option value. @see SetOption(), GetOptionInt(), HasOption() */ wxString GetOption(const wxString& name) const; /** - Gets a user-defined option as an integer. + Gets a user-defined integer-valued option. + The function is case-insensitive to @a name. If the given option is not present, the function returns 0. - Use HasOption() is 0 is a possibly valid value for the option. + Use HasOption() if 0 is a possibly valid value for the option. + + Generic options: + @li @c wxIMAGE_OPTION_MAX_WIDTH and @c wxIMAGE_OPTION_MAX_HEIGHT: If either + of these options is specified, the loaded image will be scaled down + (preserving its aspect ratio) so that its width is less than the + max width given if it is not 0 @em and its height is less than the + max height given if it is not 0. This is typically used for loading + thumbnails and the advantage of using these options compared to + calling Rescale() after loading is that some handlers (only JPEG + one right now) support rescaling the image during loading which is + vastly more efficient than loading the entire huge image and + rescaling it later (if these options are not supported by the + handler, this is still what happens however). These options must be + set before calling LoadFile() to have any effect. + + @li @c wxIMAGE_OPTION_ORIGINAL_WIDTH and @c wxIMAGE_OPTION_ORIGINAL_HEIGHT: + These options will return the original size of the image if either + @c wxIMAGE_OPTION_MAX_WIDTH or @c wxIMAGE_OPTION_MAX_HEIGHT is + specified. + @since 2.9.3 + + @li @c wxIMAGE_OPTION_QUALITY: JPEG quality used when saving. This is an + integer in 0..100 range with 0 meaning very poor and 100 excellent + (but very badly compressed). This option is currently ignored for + the other formats. + + @li @c wxIMAGE_OPTION_RESOLUTIONUNIT: The value of this option determines + whether the resolution of the image is specified in centimetres or + inches, see wxImageResolution enum elements. + + @li @c wxIMAGE_OPTION_RESOLUTION, @c wxIMAGE_OPTION_RESOLUTIONX and + @c wxIMAGE_OPTION_RESOLUTIONY: These options define the resolution of + the image in the units corresponding to @c wxIMAGE_OPTION_RESOLUTIONUNIT + options value. The first option can be set before saving the image + to set both horizontal and vertical resolution to the same value. + The X and Y options are set by the image handlers if they support + the image resolution (currently BMP, JPEG and TIFF handlers do) and + the image provides the resolution information and can be queried + after loading the image. + + Options specific to wxPNGHandler: + @li @c wxIMAGE_OPTION_PNG_FORMAT: Format for saving a PNG file, see + wxImagePNGType for the supported values. + @li @c wxIMAGE_OPTION_PNG_BITDEPTH: Bit depth for every channel (R/G/B/A). + @li @c wxIMAGE_OPTION_PNG_FILTER: Filter for saving a PNG file, see libpng + (http://www.libpng.org/pub/png/libpng-1.2.5-manual.html) for possible values + (e.g. PNG_FILTER_NONE, PNG_FILTER_SUB, PNG_FILTER_UP, etc). + @li @c wxIMAGE_OPTION_PNG_COMPRESSION_LEVEL: Compression level (0..9) for + saving a PNG file. An high value creates smaller-but-slower PNG file. + Note that unlike other formats (e.g. JPEG) the PNG format is always + lossless and thus this compression level doesn't tradeoff the image + quality. + @li @c wxIMAGE_OPTION_PNG_COMPRESSION_MEM_LEVEL: Compression memory usage + level (1..9) for saving a PNG file. An high value means the saving + process consumes more memory, but may create smaller PNG file. + @li @c wxIMAGE_OPTION_PNG_COMPRESSION_STRATEGY: Possible values are 0 for + default strategy, 1 for filter, and 2 for Huffman-only. + You can use OptiPNG (http://optipng.sourceforge.net/) to get a suitable + value for your application. + @li @c wxIMAGE_OPTION_PNG_COMPRESSION_BUFFER_SIZE: Internal buffer size + (in bytes) for saving a PNG file. Ideally this should be as big as + the resulting PNG file. Use this option if your application produces + images with small size variation. + + Options specific to wxTIFFHandler: + @li @c wxIMAGE_OPTION_TIFF_BITSPERSAMPLE: Number of bits per + sample (channel). Currently values of 1 and 8 are supported. A + value of 1 results in a black and white image. A value of 8 (the + default) can mean greyscale or RGB, depending on the value of + @c wxIMAGE_OPTION_TIFF_SAMPLESPERPIXEL. + @li @c wxIMAGE_OPTION_TIFF_SAMPLESPERPIXEL: Number of samples + (channels) per pixel. Currently values of 1 and 3 are supported. + A value of 1 results in either a greyscale (by default) or black and + white image, depending on the value of + @c wxIMAGE_OPTION_TIFF_BITSPERSAMPLE. A value of 3 (the default) + will result in an RGB image. + @li @c wxIMAGE_OPTION_TIFF_COMPRESSION: Compression type. By default + it is set to 1 (COMPRESSION_NONE). Typical other values are + 5 (COMPRESSION_LZW) and 7 (COMPRESSION_JPEG). See tiff.h for more + options. + @li @c wxIMAGE_OPTION_TIFF_PHOTOMETRIC: Specifies the photometric + interpretation. By default it is set to 2 (PHOTOMETRIC_RGB) for RGB + images and 0 (PHOTOMETRIC_MINISWHITE) for greyscale or black and + white images. It can also be set to 1 (PHOTOMETRIC_MINISBLACK) to + treat the lowest value as black and highest as white. + If you want a greyscale image it is also sufficient to only specify + @c wxIMAGE_OPTION_TIFF_PHOTOMETRIC and set it to either + PHOTOMETRIC_MINISWHITE or PHOTOMETRIC_MINISBLACK. The other values + are taken care of. - Options for wxPNGHandler: - @li wxIMAGE_OPTION_PNG_FORMAT: Format for saving a PNG file. - @li wxIMAGE_OPTION_PNG_BITDEPTH: Bit depth for every channel (R/G/B/A). + @note + Be careful when combining the options @c wxIMAGE_OPTION_TIFF_SAMPLESPERPIXEL, + @c wxIMAGE_OPTION_TIFF_BITSPERSAMPLE, and @c wxIMAGE_OPTION_TIFF_PHOTOMETRIC. + While some measures are taken to prevent illegal combinations and/or + values, it is still easy to abuse them and come up with invalid + results in the form of either corrupted images or crashes. - Supported values for wxIMAGE_OPTION_PNG_FORMAT: - @li wxPNG_TYPE_COLOUR: Stores RGB image. - @li wxPNG_TYPE_GREY: Stores grey image, converts from RGB. - @li wxPNG_TYPE_GREY_RED: Stores grey image, uses red value as grey. + @param name + The name of the option, case-insensitive. + @return + The value of the option or 0 if not found. + Use HasOption() if 0 can be a valid option value. @see SetOption(), GetOption() */ @@ -777,8 +1300,8 @@ public: Get the current mask colour or find a suitable unused colour that could be used as a mask colour. Returns @true if the image currently has a mask. */ - bool GetOrFindMaskColour(unsigned char r, unsigned char g, - unsigned char b) const; + bool GetOrFindMaskColour(unsigned char* r, unsigned char* g, + unsigned char* b) const; /** Returns the palette associated with the image. @@ -790,11 +1313,6 @@ public: */ const wxPalette& GetPalette() const; - /** - Returns the red intensity at the given coordinate. - */ - unsigned char GetRed(int x, int y) const; - /** Returns a sub image of the current one as long as the rect belongs entirely to the image. @@ -808,18 +1326,6 @@ public: */ wxBitmapType GetType() const; - /** - Gets the width of the image in pixels. - - @see GetHeight() - */ - int GetWidth() const; - - /** - Converts a color in HSV color space to RGB color space. - */ - wxImage::RGBValue HSVtoRGB(const wxImage::HSVValue & hsv); - /** Returns @true if this image has alpha channel, @false otherwise. @@ -836,53 +1342,33 @@ public: Returns @true if the given option is present. The function is case-insensitive to @a name. + The lists of the currently supported options are in GetOption() and + GetOptionInt() function docs. + @see SetOption(), GetOption(), GetOptionInt() */ bool HasOption(const wxString& name) const; /** - Initializes the image alpha channel data. - - It is an error to call it if the image already has alpha data. - If it doesn't, alpha data will be by default initialized to all pixels - being fully opaque. But if the image has a mask colour, all mask pixels - will be completely transparent. + Returns @true if image data is present. */ - void InitAlpha(); + bool IsOk() const; /** - Internal use only. Adds standard image format handlers. - It only install wxBMPHandler for the time being, which is used by wxBitmap. - - This function is called by wxWidgets on startup, and shouldn't be called by - the user. - - @see wxImageHandler, wxInitAllImageHandlers(), wxQuantize + Returns @true if the given pixel is transparent, i.e.\ either has the mask + colour if this image has a mask or if this image has alpha channel and alpha + value of this pixel is strictly less than @a threshold. */ - static void InitStandardHandlers(); - - /** - Adds a handler at the start of the static list of format handlers. + bool IsTransparent(int x, int y, + unsigned char threshold = wxIMAGE_ALPHA_THRESHOLD) const; - @param handler - A new image format handler object. There is usually only one instance - of a given handler class in an application session. + //@} - @see wxImageHandler - */ - static void InsertHandler(wxImageHandler* handler); /** - Returns @true if image data is present. + @name Loading and saving functions */ - bool IsOk() const; - - /** - Returns @true if the given pixel is transparent, i.e. either has the mask - colour if this image has a mask or if this image has alpha channel and alpha - value of this pixel is strictly less than @a threshold. - */ - bool IsTransparent(int x, int y, unsigned char threshold = 128) const; + //@{ /** Loads an image from an input stream. @@ -898,7 +1384,7 @@ public: @li wxBITMAP_TYPE_PNG: Load a PNG bitmap file. @li wxBITMAP_TYPE_PCX: Load a PCX bitmap file. @li wxBITMAP_TYPE_PNM: Load a PNM bitmap file. - @li wxBITMAP_TYPE_TIF: Load a TIFF bitmap file. + @li wxBITMAP_TYPE_TIFF: Load a TIFF bitmap file. @li wxBITMAP_TYPE_TGA: Load a TGA bitmap file. @li wxBITMAP_TYPE_XPM: Load a XPM bitmap file. @li wxBITMAP_TYPE_ICO: Load a Windows icon file (ICO). @@ -928,7 +1414,9 @@ public: @see SaveFile() */ - bool LoadFile(wxInputStream& stream, wxBitmapType type, int index = -1); + virtual bool LoadFile(wxInputStream& stream, + wxBitmapType type = wxBITMAP_TYPE_ANY, + int index = -1); /** Loads an image from a file. @@ -941,9 +1429,9 @@ public: @param index See the description in the LoadFile(wxInputStream&, wxBitmapType, int) overload. */ - bool LoadFile(const wxString& name, - wxBitmapType type = wxBITMAP_TYPE_ANY, - int index = -1); + virtual bool LoadFile(const wxString& name, + wxBitmapType type = wxBITMAP_TYPE_ANY, + int index = -1); /** Loads an image from a file. @@ -956,9 +1444,8 @@ public: @param index See the description in the LoadFile(wxInputStream&, wxBitmapType, int) overload. */ - bool LoadFile(const wxString& name, const wxString& mimetype, - int index = -1); - + virtual bool LoadFile(const wxString& name, const wxString& mimetype, + int index = -1); /** Loads an image from an input stream. @@ -969,105 +1456,10 @@ public: @param mimetype MIME type string (for example 'image/jpeg') @param index - See the description in the LoadFile(wxInputStream&, wxBitmapType, int) overload. - */ - bool LoadFile(wxInputStream& stream, - const wxString& mimetype, - int index = -1); - - /** - Returns a mirrored copy of the image. - The parameter @a horizontally indicates the orientation. - */ - wxImage Mirror(bool horizontally = true) const; - - /** - Copy the data of the given @a image to the specified position in this image. - */ - void Paste(const wxImage& image, int x, int y); - - /** - Converts a color in RGB color space to HSV color space. - */ - wxImage::HSVValue RGBtoHSV(const wxImage::RGBValue& rgb); - - /** - Finds the handler with the given name, and removes it. - The handler is not deleted. - - @param name - The handler name. - - @return @true if the handler was found and removed, @false otherwise. - - @see wxImageHandler - */ - static bool RemoveHandler(const wxString& name); - - /** - Replaces the colour specified by @e r1,g1,b1 by the colour @e r2,g2,b2. - */ - void Replace(unsigned char r1, unsigned char g1, - unsigned char b1, unsigned char r2, - unsigned char g2, unsigned char b2); - - /** - Changes the size of the image in-place by scaling it: after a call to this - function,the image will have the given width and height. - - For a description of the @a quality parameter, see the Scale() function. - Returns the (modified) image itself. - - @see Scale() - */ - wxImage Rescale(int width, int height, - int quality = wxIMAGE_QUALITY_NORMAL); - - /** - Changes the size of the image in-place without scaling it by adding either a - border with the given colour or cropping as necessary. - - The image is pasted into a new image with the given @a size and background - colour at the position @a pos relative to the upper left of the new image. - - If @a red = green = blue = -1 then use either the current mask colour - if set or find, use, and set a suitable mask colour for any newly exposed - areas. - - @return The (modified) image itself. - - @see Size() - */ - wxImage Resize(const wxSize& size, const wxPoint& pos, - int red = -1, int green = -1, - int blue = -1); - - /** - Rotates the image about the given point, by @a angle radians. - - Passing @true to @a interpolating results in better image quality, but is slower. - - If the image has a mask, then the mask colour is used for the uncovered - pixels in the rotated image background. Else, black (rgb 0, 0, 0) will be used. - - Returns the rotated image, leaving this image intact. - */ - wxImage Rotate(double angle, const wxPoint& rotationCentre, - bool interpolating = true, - wxPoint* offsetAfterRotation = NULL) const; - - /** - Returns a copy of the image rotated 90 degrees in the direction - indicated by @a clockwise. - */ - wxImage Rotate90(bool clockwise = true) const; - - /** - Rotates the hue of each pixel in the image by @e angle, which is a double in - the range of -1.0 to +1.0, where -1.0 corresponds to -360 degrees and +1.0 - corresponds to +360 degrees. + See the description in the LoadFile(wxInputStream&, wxBitmapType, int) overload. */ - void RotateHue(double angle); + virtual bool LoadFile(wxInputStream& stream, const wxString& mimetype, + int index = -1); /** Saves an image in the given stream. @@ -1092,8 +1484,8 @@ public: @see LoadFile() */ - bool SaveFile(wxOutputStream& stream, - const wxString& mimetype) const; + virtual bool SaveFile(wxOutputStream& stream, + const wxString& mimetype) const; /** Saves an image in the named file. @@ -1115,7 +1507,7 @@ public: in 8 colors at the size supplied. @li wxBITMAP_TYPE_CUR: Save a Windows cursor file (CUR). */ - bool SaveFile(const wxString& name, wxBitmapType type) const; + virtual bool SaveFile(const wxString& name, wxBitmapType type) const; /** Saves an image in the named file. @@ -1125,8 +1517,7 @@ public: @param mimetype MIME type. */ - bool SaveFile(const wxString& name, - const wxString& mimetype) const; + virtual bool SaveFile(const wxString& name, const wxString& mimetype) const; /** Saves an image in the named file. @@ -1139,7 +1530,7 @@ public: @param name Name of the file to save the image to. */ - bool SaveFile(const wxString& name) const; + virtual bool SaveFile(const wxString& name) const; /** Saves an image in the given stream. @@ -1149,54 +1540,16 @@ public: @param type MIME type. */ - bool SaveFile(wxOutputStream& stream, wxBitmapType type) const; - - /** - Returns a scaled version of the image. - - This is also useful for scaling bitmaps in general as the only other way - to scale bitmaps is to blit a wxMemoryDC into another wxMemoryDC. - - The parameter @a quality determines what method to use for resampling the image. - Can be one of the following: - - wxIMAGE_QUALITY_NORMAL: Uses the normal default scaling method of pixel - replication - - wxIMAGE_QUALITY_HIGH: Uses bicubic and box averaging resampling methods - for upsampling and downsampling respectively - - It should be noted that although using @c wxIMAGE_QUALITY_HIGH produces much nicer - looking results it is a slower method. Downsampling will use the box averaging - method which seems to operate very fast. If you are upsampling larger images using - this method you will most likely notice that it is a bit slower and in extreme - cases it will be quite substantially slower as the bicubic algorithm has to process a - lot of data. + virtual bool SaveFile(wxOutputStream& stream, wxBitmapType type) const; - It should also be noted that the high quality scaling may not work as expected - when using a single mask colour for transparency, as the scaling will blur the - image and will therefore remove the mask partially. Using the alpha channel - will work. - - Example: - @code - // get the bitmap from somewhere - wxBitmap bmp = ...; + //@} - // rescale it to have size of 32*32 - if ( bmp.GetWidth() != 32 || bmp.GetHeight() != 32 ) - { - wxImage image = bmp.ConvertToImage(); - bmp = wxBitmap(image.Scale(32, 32)); - // another possibility: - image.Rescale(32, 32); - bmp = image; - } - @endcode - @see Rescale() + /** + @name Setters */ - wxImage Scale(int width, int height, - int quality = wxIMAGE_QUALITY_NORMAL) const; + //@{ /** This function is similar to SetData() and has similar restrictions. @@ -1220,6 +1573,16 @@ public: */ void SetAlpha(int x, int y, unsigned char alpha); + /** + Removes the alpha channel from the image. + + This function should only be called if the image has alpha channel data, + use HasAlpha() to check for this. + + @since 2.9.1 + */ + void ClearAlpha(); + /** Sets the image data without performing checks. @@ -1230,11 +1593,17 @@ public: The data must have been allocated with @c malloc(), @b NOT with @c operator new. - After this call the pointer to the data is owned by the wxImage object, - that will be responsible for deleting it. + If @a static_data is @false, after this call the pointer to the data is + owned by the wxImage object, that will be responsible for deleting it. Do not pass to this function a pointer obtained through GetData(). */ - void SetData(unsigned char* data); + void SetData(unsigned char* data, bool static_data = false); + + /** + @overload + */ + void SetData(unsigned char* data, int new_width, int new_height, + bool static_data = false); /** Specifies whether there is a mask or not. @@ -1275,18 +1644,23 @@ public: unsigned char mg, unsigned char mb); - //@{ /** Sets a user-defined option. The function is case-insensitive to @a name. For example, when saving as a JPEG file, the option @b quality is used, which is a number between 0 and 100 (0 is terrible, 100 is very good). + The lists of the currently supported options are in GetOption() and + GetOptionInt() function docs. + @see GetOption(), GetOptionInt(), HasOption() */ void SetOption(const wxString& name, const wxString& value); + + /** + @overload + */ void SetOption(const wxString& name, int value); - //@} /** Associates a palette with the image. @@ -1302,7 +1676,8 @@ public: This routine performs bounds-checks for the coordinate so it can be considered a safe way to manipulate the data. */ - void SetRGB(wxRect& rect, unsigned char red, + void SetRGB(const wxRect& rect, + unsigned char red, unsigned char green, unsigned char blue); @@ -1325,45 +1700,266 @@ public: */ void SetType(wxBitmapType type); + //@} + + + /** - Returns a resized version of this image without scaling it by adding either a - border with the given colour or cropping as necessary. + @name Handler management functions + */ + //@{ - The image is pasted into a new image with the given @a size and background - colour at the position @a pos relative to the upper left of the new image. + /** + Register an image handler. - If @a red = green = blue = -1 then the areas of the larger image not covered - by this image are made transparent by filling them with the image mask colour - (which will be allocated automatically if it isn't currently set). + Typical example of use: + @code + wxImage::AddHandler(new wxPNGHandler); + @endcode - Otherwise, the areas will be filled with the colour with the specified RGB components. + See @ref image_handlers for a list of the available handlers. You can + also use ::wxInitAllImageHandlers() to add handlers for all the image + formats supported by wxWidgets at once. - @see Resize() + @param handler + A heap-allocated handler object which will be deleted by wxImage + if it is removed later by RemoveHandler() or at program shutdown. */ - wxImage Size(const wxSize& size, const wxPoint& pos, int red = -1, - int green = -1, int blue = -1) const; + static void AddHandler(wxImageHandler* handler); /** - Assignment operator, using @ref overview_refcount "reference counting". + Deletes all image handlers. + This function is called by wxWidgets on exit. + */ + static void CleanUpHandlers(); - @param image - Image to assign. + /** + Finds the handler with the given name. - @return Returns 'this' object. + @param name + The handler name. + + @return A pointer to the handler if found, @NULL otherwise. + + @see wxImageHandler + */ + static wxImageHandler* FindHandler(const wxString& name); + + /** + Finds the handler associated with the given extension and type. + + @param extension + The file extension, such as "bmp". + @param imageType + The image type; one of the ::wxBitmapType values. + + @return A pointer to the handler if found, @NULL otherwise. + + @see wxImageHandler + */ + static wxImageHandler* FindHandler(const wxString& extension, + wxBitmapType imageType); + + /** + Finds the handler associated with the given image type. + + @param imageType + The image type; one of the ::wxBitmapType values. + + @return A pointer to the handler if found, @NULL otherwise. + + @see wxImageHandler + */ + static wxImageHandler* FindHandler(wxBitmapType imageType); + + /** + Finds the handler associated with the given MIME type. + + @param mimetype + MIME type. + + @return A pointer to the handler if found, @NULL otherwise. + + @see wxImageHandler + */ + static wxImageHandler* FindHandlerMime(const wxString& mimetype); + + /** + Returns the static list of image format handlers. + + @see wxImageHandler + */ + static wxList& GetHandlers(); + + /** + Internal use only. Adds standard image format handlers. + It only install wxBMPHandler for the time being, which is used by wxBitmap. + + This function is called by wxWidgets on startup, and shouldn't be called by + the user. + + @see wxImageHandler, wxInitAllImageHandlers(), wxQuantize + */ + static void InitStandardHandlers(); + + /** + Adds a handler at the start of the static list of format handlers. + + @param handler + A new image format handler object. There is usually only one instance + of a given handler class in an application session. + + @see wxImageHandler + */ + static void InsertHandler(wxImageHandler* handler); + + /** + Finds the handler with the given name, and removes it. + + The handler is also deleted. + + @param name + The handler name. + + @return @true if the handler was found and removed, @false otherwise. + + @see wxImageHandler + */ + static bool RemoveHandler(const wxString& name); + + //@} + + + /** + Returns @true if at least one of the available image handlers can read + the file with the given name. + + See wxImageHandler::CanRead for more info. + */ + static bool CanRead(const wxString& filename); + + /** + Returns @true if at least one of the available image handlers can read + the data in the given stream. + + See wxImageHandler::CanRead for more info. + */ + static bool CanRead(wxInputStream& stream); + + //@{ + /** + If the image file contains more than one image and the image handler is + capable of retrieving these individually, this function will return the + number of available images. + + For the overload taking the parameter @a filename, that's the name + of the file to query. + For the overload taking the parameter @a stream, that's the opened input + stream with image data. + + See wxImageHandler::GetImageCount() for more info. + + The parameter @a type may be one of the following values: + @li wxBITMAP_TYPE_BMP: Load a Windows bitmap file. + @li wxBITMAP_TYPE_GIF: Load a GIF bitmap file. + @li wxBITMAP_TYPE_JPEG: Load a JPEG bitmap file. + @li wxBITMAP_TYPE_PNG: Load a PNG bitmap file. + @li wxBITMAP_TYPE_PCX: Load a PCX bitmap file. + @li wxBITMAP_TYPE_PNM: Load a PNM bitmap file. + @li wxBITMAP_TYPE_TIFF: Load a TIFF bitmap file. + @li wxBITMAP_TYPE_TGA: Load a TGA bitmap file. + @li wxBITMAP_TYPE_XPM: Load a XPM bitmap file. + @li wxBITMAP_TYPE_ICO: Load a Windows icon file (ICO). + @li wxBITMAP_TYPE_CUR: Load a Windows cursor file (CUR). + @li wxBITMAP_TYPE_ANI: Load a Windows animated cursor file (ANI). + @li wxBITMAP_TYPE_ANY: Will try to autodetect the format. + + @return Number of available images. For most image handlers, this is 1 + (exceptions are TIFF and ICO formats as well as animated GIFs + for which this function returns the number of frames in the + animation). + */ + static int GetImageCount(const wxString& filename, + wxBitmapType type = wxBITMAP_TYPE_ANY); + static int GetImageCount(wxInputStream& stream, + wxBitmapType type = wxBITMAP_TYPE_ANY); + //@} + + /** + Iterates all registered wxImageHandler objects, and returns a string containing + file extension masks suitable for passing to file open/save dialog boxes. + + @return The format of the returned string is @c "(*.ext1;*.ext2)|*.ext1;*.ext2". + It is usually a good idea to prepend a description before passing + the result to the dialog. + Example: + @code + wxFileDialog FileDlg( this, "Choose Image", ::wxGetCwd(), "", + _("Image Files ") + wxImage::GetImageExtWildcard(), + wxFD_OPEN ); + @endcode + + @see wxImageHandler + */ + static wxString GetImageExtWildcard(); + + /** + Converts a color in RGB color space to HSV color space. + */ + static wxImage::HSVValue RGBtoHSV(const wxImage::RGBValue& rgb); + + /** + Converts a color in HSV color space to RGB color space. */ - wxImage operator =(const wxImage& image); + static wxImage::RGBValue HSVtoRGB(const wxImage::HSVValue& hsv); +}; + + +class wxImageHistogram : public wxImageHistogramBase +{ +public: + wxImageHistogram(); + + // get the key in the histogram for the given RGB values + static unsigned long MakeKey(unsigned char r, + unsigned char g, + unsigned char b); + + // find first colour that is not used in the image and has higher + // RGB values than RGB(startR, startG, startB) + // + // returns true and puts this colour in r, g, b (each of which may be NULL) + // on success or returns false if there are no more free colours + bool FindFirstUnusedColour(unsigned char *r, + unsigned char *g, + unsigned char *b, + unsigned char startR = 1, + unsigned char startG = 0, + unsigned char startB = 0 ) const; }; +/** + An instance of an empty image without an alpha channel. +*/ +wxImage wxNullImage; + + // ============================================================================ // Global functions/macros // ============================================================================ -/** @ingroup group_funcmacro_appinitterm */ +/** @addtogroup group_funcmacro_appinitterm */ //@{ /** - Initializes all available image handlers. For a list of available handlers, - see wxImage. + Initializes all available image handlers. + + This function calls wxImage::AddHandler() for all the available image + handlers (see @ref image_handlers for the full list). Calling it is the + simplest way to initialize wxImage but it creates and registers even the + handlers your program may not use. If you want to avoid the overhead of + doing this you need to call wxImage::AddHandler() manually just for the + handlers that you do want to use. @see wxImage, wxImageHandler