X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/371a5b4e62eb415107e045588f614fa49e866e78..900ca9b89ac66740884f6d8d2b5b04ffca1bb3f7:/include/wx/msw/wince/setup.h?ds=sidebyside diff --git a/include/wx/msw/wince/setup.h b/include/wx/msw/wince/setup.h index 602f01a784..4b7ed472de 100644 --- a/include/wx/msw/wince/setup.h +++ b/include/wx/msw/wince/setup.h @@ -1,17 +1,18 @@ ///////////////////////////////////////////////////////////////////////////// // Name: wx/msw/wince/setup.h // Purpose: Configuration for the library -// Author: Marco Cavallini +// Author: Julian Smart // Modified by: -// Created: 08/11/2002 -// RCS-ID: -// Copyright: (c) KOAN SAS ( www.koansoftware.com ) +// Created: 01/02/97 +// RCS-ID: $Id$ +// Copyright: (c) Julian Smart // Licence: wxWindows licence -/////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////// #ifndef _WX_SETUP_H_ #define _WX_SETUP_H_ +/* --- start common options --- */ // ---------------------------------------------------------------------------- // global settings // ---------------------------------------------------------------------------- @@ -26,60 +27,32 @@ // compatibility settings // ---------------------------------------------------------------------------- -// This setting determines the compatibility with 1.68 API: -// Level 0: no backward compatibility, all new features -// Level 1: some extra methods are defined for compatibility. -// -// Default is 0. -// -// Recommended setting: 0 (in fact the compatibility code is now very minimal -// so there is little advantage to setting it to 1. -#define WXWIN_COMPATIBILITY 0 - -// This setting determines the compatibility with 2.0 API: set it to 1 to -// enable it -// -// Default is 0. -// -// Recommended setting: 0 (please update your code instead!) -#define WXWIN_COMPATIBILITY_2 0 - -// This setting determines the compatibility with 2.0 API: set it to 1 to -// enable it +// This setting determines the compatibility with 2.4 API: set it to 1 to +// enable it but please consider updating your code instead. // -// Default is 1. +// Default is 0 // -// Recommended setting: 0 (please update your code instead!) -#define WXWIN_COMPATIBILITY_2_2 1 +// Recommended setting: 0 (please update your code) +#define WXWIN_COMPATIBILITY_2_4 0 -// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap, -// but this is very dangerous because you can mistakenly pass an icon instead -// of a bitmap to a function taking "const wxBitmap&" - which will *not* work -// because an icon is not a valid bitmap +// This setting determines the compatibility with 2.6 API: set it to 0 to +// flag all cases of using deprecated functions. // -// Starting from 2.1.12, you have the choice under this backwards compatible -// behaviour (your code will still compile, but probably won't behave as -// expected!) and not deriving wxIcon class from wxBitmap, but providing a -// conversion ctor wxBitmap(const wxIcon&) instead. +// Default is 1 but please try building your code with 0 as the default will +// change to 0 in the next version and the deprecated functions will disappear +// in the version after it completely. // -// Recommended setting: 0 -#define wxICON_IS_BITMAP 0 +// Recommended setting: 0 (please update your code) +#define WXWIN_COMPATIBILITY_2_6 1 -// Define as 1 for font size to be backward compatible to 1.63 and earlier. -// 1.64 and later define point sizes to be compatible with Windows. +// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when +// default system font is used for wxWindow::GetCharWidth/Height() instead of +// the current font. // // Default is 0 // // Recommended setting: 0 -#define wxFONT_SIZE_COMPATIBILITY 0 - -// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before. -// If migrating between versions, your dialogs may seem to shrink. -// -// Default is 1 -// -// Recommended setting: 0 (the new calculations are more correct!) -#define wxDIALOG_UNIT_COMPATIBILITY 1 +#define wxDIALOG_UNIT_COMPATIBILITY 0 // ---------------------------------------------------------------------------- // debugging settings @@ -88,7 +61,7 @@ // Generic comment about debugging settings: they are very useful if you don't // use any other memory leak detection tools such as Purify/BoundsChecker, but // are probably redundant otherwise. Also, Visual C++ CRT has the same features -// as wxWindows memory debugging subsystem built in since version 5.0 and you +// as wxWidgets memory debugging subsystem built in since version 5.0 and you // may prefer to use it instead of built in memory debugging code because it is // faster and more fool proof. // @@ -147,44 +120,45 @@ // Default is 1 // // Recommended setting: 1 if your compiler supports it. -#ifdef _MSC_VER - #define wxUSE_ON_FATAL_EXCEPTION 1 -#else - #define wxUSE_ON_FATAL_EXCEPTION 0 -#endif +#define wxUSE_ON_FATAL_EXCEPTION 1 + +// Set this to 1 to be able to generate a human-readable (unlike +// machine-readable minidump created by wxCrashReport::Generate()) stack back +// trace when your program crashes using wxStackWalker +// +// Default is 1 if supported by the compiler. +// +// Recommended setting: 1, set to 0 if your programs never crash +#define wxUSE_STACKWALKER 1 + +// Set this to 1 to compile in wxDebugReport class which allows you to create +// and optionally upload to your web site a debug report consisting of back +// trace of the crash (if wxUSE_STACKWALKER == 1) and other information. +// +// Default is 1 if supported by the compiler. +// +// Recommended setting: 1, it is compiled into a separate library so there +// is no overhead if you don't use it +#define wxUSE_DEBUGREPORT 1 // ---------------------------------------------------------------------------- // Unicode support // ---------------------------------------------------------------------------- -// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be +// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be // defined as wchar_t, wxString will use Unicode internally. If you set this // to 1, you must use wxT() macro for all literal strings in the program. // -// Unicode is currently only fully supported under Windows NT/2000/XP (Windows 9x -// doesn't support it and the programs compiled in Unicode mode will not run -// under 9x). +// Unicode is currently only fully supported under Windows NT/2000/XP +// (Windows 9x doesn't support it and the programs compiled in Unicode mode +// will not run under 9x -- but see wxUSE_UNICODE_MSLU below). // // Default is 0 // // Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP) -#define wxUSE_UNICODE 0 - -// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode -// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. This -// setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see -// http://www.microsoft.com/globaldev/Articles/mslu_announce.asp). Note that you -// will have to modify the makefiles to include unicows.lib import library as the first -// library (if you use MSVC, you can run the makefile with "nmake MSLU=1 UNICODE=1" -// command). -// -// If your compiler doesn't have unicows.lib, you can get a version of it at -// http://libunicows.sourceforge.net -// -// Default is 0 -// -// Recommended setting: 0 -#define wxUSE_UNICODE_MSLU 0 +#ifndef wxUSE_UNICODE + #define wxUSE_UNICODE 0 +#endif // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without // compiling the program in Unicode mode. More precisely, it will be possible @@ -200,6 +174,38 @@ // global features // ---------------------------------------------------------------------------- +// Compile library in exception-safe mode? If set to 1, the library will try to +// behave correctly in presence of exceptions (even though it still will not +// use the exceptions itself) and notify the user code about any unhandled +// exceptions. If set to 0, propagation of the exceptions through the library +// code will lead to undefined behaviour -- but the code itself will be +// slightly smaller and faster. +// +// Note that like wxUSE_THREADS this option is automatically set to 0 if +// wxNO_EXCEPTIONS is defined. +// +// Default is 1 +// +// Recommended setting: depends on whether you intend to use C++ exceptions +// in your own code (1 if you do, 0 if you don't) +#define wxUSE_EXCEPTIONS 1 + +// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI +// +// Default is 0 +// +// Recommended setting: 0 (this is still work in progress...) +#define wxUSE_EXTENDED_RTTI 0 + +// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from +// std::list and std::vector, with a compatibility interface, +// and for wxHashMap to be implemented with templates. +// +// Default is 0 +// +// Recommended setting: YMMV +#define wxUSE_STL 0 + // Support for message/error logging. This includes wxLogXXX() functions and // wxLog and derived classes. Don't set this to 0 unless you really know what // you are doing. @@ -209,13 +215,6 @@ // Recommended setting: 1 (always) #define wxUSE_LOG 1 -// Support for command line parsing using wxCmdLineParser class. -// -// Default is 1 -// -// Recommended setting: 1 (can be set to 0 if you don't use the cmd line) -#define wxUSE_CMDLINE_PARSER 1 - // Recommended setting: 1 #define wxUSE_LOGWINDOW 1 @@ -225,25 +224,56 @@ // Recommended setting: 1 #define wxUSE_LOG_DIALOG 1 +// Support for command line parsing using wxCmdLineParser class. +// +// Default is 1 +// +// Recommended setting: 1 (can be set to 0 if you don't use the cmd line) +#define wxUSE_CMDLINE_PARSER 1 + // Support for multithreaded applications: if 1, compile in thread classes // (thread.h) and make the library a bit more thread safe. Although thread // support is quite stable by now, you may still consider recompiling the // library without it if you have no use for it - this will result in a // somewhat smaller and faster operation. // -// This is ignored under Win16, threads are only supported under Win32. +// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset +// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in +// build/msw/config.* file this value will have no effect. // // Default is 1 // // Recommended setting: 0 unless you do plan to develop MT applications #define wxUSE_THREADS 1 -// If enabled (1), compiles wxWindows streams classes +// If enabled, compiles wxWidgets streams classes +// +// wx stream classes are used for image IO, process IO redirection, network +// protocols implementation and much more and so disabling this results in a +// lot of other functionality being lost. +// +// Default is 1 +// +// Recommended setting: 1 as setting it to 0 disables many other things #define wxUSE_STREAMS 1 -// Use standard C++ streams if 1. If 0, use wxWin streams implementation. +// Use standard C++ streams if 1 instead of wx streams in some places. If +// disabled (default), wx streams are used everywhere and wxWidgets doesn't +// depend on the standard streams library. +// +// Notice that enabling this does not replace wx streams with std streams +// everywhere, in a lot of places wx streams are used no matter what. +// +// Default is 0 +// +// Recommended setting: 1 if you use the standard streams anyhow and so +// dependency on the standard streams library is not a +// problem #define wxUSE_STD_IOSTREAM 0 +// Enable conversion to standard C++ string if 1. +#define wxUSE_STD_STRING 0 + // ---------------------------------------------------------------------------- // non GUI features selection // ---------------------------------------------------------------------------- @@ -278,6 +308,14 @@ // Recommended setting: 1 (but may be safely disabled if you don't use it) #define wxUSE_FSVOLUME 1 +// Use wxStandardPaths class which allows to retrieve some standard locations +// in the file system +// +// Default is 1 +// +// Recommended setting: 1 (may be disabled to save space, but not much) +#define wxUSE_STDPATHS 1 + // use wxTextBuffer class: required by wxTextFile #define wxUSE_TEXTBUFFER 1 @@ -305,15 +343,6 @@ // Recommended setting: 1 #define wxUSE_DATETIME 1 -// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not -// the same as wxDateTime!). These classes are obsolete and shouldn't be used -// in new code -// -// Default is 0 -// -// Recommended setting: 0 unless you have legacy code which uses these classes -#define wxUSE_TIMEDATE 0 - // Set wxUSE_TIMER to 1 to compile wxTimer class // // Default is 1 @@ -385,16 +414,19 @@ // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM) #define wxUSE_FS_INET 1 +// wxArchive classes for accessing archives such as zip and tar +#define wxUSE_ARCHIVE_STREAMS 1 + // Set to 1 to compile wxZipInput/OutputStream classes. #define wxUSE_ZIPSTREAM 1 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by -// wxUSE_LIBPNG. +// wxUSE_LIBPNG #define wxUSE_ZLIB 1 // If enabled, the code written by Apple will be used to write, in a portable // way, float on the disk. See extended.c for the license which is different -// from wxWindows one. +// from wxWidgets one. // // Default is 1. // @@ -426,6 +458,16 @@ // Define this to use wxURL class. #define wxUSE_URL 1 +// Define this to use native platform url and protocol support. +// Currently valid only for MS-Windows. +// Note: if you set this to 1, you can open ftp/http/gopher sites +// and obtain a valid input stream for these sites +// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0. +// Doing so reduces the code size. +// +// This code is experimental and subject to change. +#define wxUSE_URL_NATIVE 0 + // Support for regular expression matching via wxRegEx class: enable this to // use POSIX regular expressions in your code. You need to compile regex // library from src/regex to use it under Windows. @@ -439,8 +481,41 @@ // wxSystemOptions class #define wxUSE_SYSTEM_OPTIONS 1 -// wxWave class -#define wxUSE_WAVE 1 +// wxSound class +#define wxUSE_SOUND 1 + +// Use wxMediaCtrl +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_MEDIACTRL 1 + +// Use GStreamer for Unix (req a lot of dependancies) +// +// Default is 0 +// +// Recommended setting: 1 (wxMediaCtrl won't work by default without it) +#define wxUSE_GSTREAMER 0 + +// Use wxWidget's XRC XML-based resource system. Recommended. +// +// Default is 1 +// +// Recommended setting: 1 (requires wxUSE_XML) +#define wxUSE_XRC 1 + +// XML parsing classes. Note that their API will change in the future, so +// using wxXmlDocument and wxXmlNode in your app is not recommended. +// +// Default is 1 +// +// Recommended setting: 1 (required by XRC) +#if wxUSE_XRC +# define wxUSE_XML 1 +#else +# define wxUSE_XML 0 +#endif // ---------------------------------------------------------------------------- // Individual GUI controls @@ -470,7 +545,7 @@ // Recommended setting: 1 (may be set to 0) #define wxUSE_TIPWINDOW 1 -// Each of the settings below corresponds to one wxWindows control. They are +// Each of the settings below corresponds to one wxWidgets control. They are // all switched on by default but may be disabled if you are sure that your // program (including any standard dialogs it can show!) doesn't need them and // if you desperately want to save some space. If you use any of these you must @@ -486,6 +561,8 @@ #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) #define wxUSE_CHOICE 1 // wxChoice #define wxUSE_COMBOBOX 1 // wxComboBox +#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl +#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl #define wxUSE_GAUGE 1 // wxGauge #define wxUSE_LISTBOX 1 // wxListBox #define wxUSE_LISTCTRL 1 // wxListCtrl @@ -515,30 +592,23 @@ // or the wrapper around native control. For native look and feel the native // version should be used. // -// Default is 1. +// Default is 1 for the platforms where native status bar is supported. // // Recommended setting: 1 (there is no advantage in using the generic one) #define wxUSE_NATIVE_STATUSBAR 1 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar // classes at all. Otherwise, use the native toolbar class unless -// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which -// supports some features which might not be supported by the native wxToolBar -// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1. +// wxUSE_TOOLBAR_NATIVE is 0. // // Default is 1 for all settings. // -// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for -// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility). +// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE. #define wxUSE_TOOLBAR 1 #define wxUSE_TOOLBAR_NATIVE 1 -#define wxUSE_TOOLBAR_SIMPLE 1 - -// this setting is obsolete, value is ignored -#define wxUSE_BUTTONBAR 1 // wxNotebook is a control with several "tabs" located on one of its sides. It -// may be used ot logically organise the data presented to the user instead of +// may be used to logically organise the data presented to the user instead of // putting everything in one huge dialog. It replaces wxTabControl and related // classes of wxWin 1.6x. // @@ -547,6 +617,38 @@ // Recommended setting: 1 #define wxUSE_NOTEBOOK 1 +// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of +// the tabs +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_LISTBOOK 1 + +// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of +// the tabs +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_CHOICEBOOK 1 + +// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of +// the tabs +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_TREEBOOK 1 + +// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of +// tabs +// +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_TOOLBOOK 1 + // wxTabDialog is a generic version of wxNotebook but it is incompatible with // the new class. It shouldn't be used in new code. // @@ -555,23 +657,21 @@ // Recommended setting: 0 (use wxNotebook) #define wxUSE_TAB_DIALOG 0 -// wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and -// the new, much imporved and enhanced version. The new version is backwards -// compatible with the old one and should be used whenever possible, i.e. if -// you set wxUSE_GRID to 1, set wxUSE_NEW_GRID to 1 too. +// wxGrid class // -// Default is 1 for both options. +// Default is 1, set to 0 to cut down compilation time and binaries size if you +// don't use it. // -// Recommended setting: 1 for wxUSE_NEW_GRID, 0 if you have an old code using -// wxGrid and 100% backwards compatibality (with all old wxGrid quirks) is -// essential. +// Recommended setting: 1 // -// WIN16/BC++ resets wxUSE_NEW_GRID to 0 because it exceeds the data limit. #define wxUSE_GRID 1 -#define wxUSE_NEW_GRID 1 -// wxProperty[Value/Form/List] classes, used by Dialog Editor -#define wxUSE_PROPSHEET 1 +// wxMiniFrame class: a frame with narrow title bar +// +// Default is 1. +// +// Recommended setting: 1 (it doesn't cost almost anything) +#define wxUSE_MINIFRAME 1 // ---------------------------------------------------------------------------- // Miscellaneous GUI stuff @@ -580,6 +680,9 @@ // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) #define wxUSE_ACCEL 1 +// Hotkey support (currently Windows only) +#define wxUSE_HOTKEY 1 + // Use wxCaret: a class implementing a "cursor" in a text control (called caret // under Windows). // @@ -588,6 +691,15 @@ // Recommended setting: 1 (can be safely set to 0, not used by the library) #define wxUSE_CARET 1 +// Use wxDisplay class: it allows enumerating all displays on a system and +// their geometries as well as finding the display on which the given point or +// window lies. +// +// Default is 1. +// +// Recommended setting: 1 if you need it, can be safely set to 0 otherwise +#define wxUSE_DISPLAY 1 + // Miscellaneous geometry code: needed for Canvas library #define wxUSE_GEOMETRY 1 @@ -631,22 +743,10 @@ // wxValidator class and related methods #define wxUSE_VALIDATORS 1 -// wxDC cacheing implementation -#define wxUSE_DC_CACHEING 1 - // ---------------------------------------------------------------------------- // common dialogs // ---------------------------------------------------------------------------- -// Define 1 to use generic dialogs in Windows, even though they duplicate -// native common dialog (e.g. wxColourDialog). This is mainly useful for -// testing. -// -// Default is 0 -// -// Recommended setting: 0 -#define wxUSE_GENERIC_DIALOGS_IN_MSW 0 - // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g. // file selector, printer dialog). Switching this off also switches off the // printing architecture and interactive wxPrinterDC. @@ -750,10 +850,21 @@ // Big GUI components // ---------------------------------------------------------------------------- +// Set to 0 to disable MDI support. +// +// Requires wxUSE_NOTEBOOK under platforms other than MSW. +// +// Default is 1. +// +// Recommended setting: 1, can be safely set to 0. +#define wxUSE_MDI 1 + // Set to 0 to disable document/view architecture #define wxUSE_DOC_VIEW_ARCHITECTURE 1 // Set to 0 to disable MDI document/view architecture +// +// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE #define wxUSE_MDI_ARCHITECTURE 1 // Set to 0 to disable print/preview architecture code @@ -768,11 +879,24 @@ // smaller library. #define wxUSE_HTML 1 -// OpenGL canvas +// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL +// headers and libraries to be able to compile the library with wxUSE_GLCANVAS +// set to 1. Note that for some compilers (notably Microsoft Visual C++) you +// will need to manually add opengl32.lib and glu32.lib to the list of +// libraries linked with your program if you use OpenGL. +// +// Default is 0. +// +// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise #define wxUSE_GLCANVAS 0 -// wxTreeLayout class -#define wxUSE_TREELAYOUT 1 +// wxRichTextCtrl allows editing of styled text. +// +// Default is 1. +// +// Recommended setting: 1, set to 0 if you want compile a +// smaller library. +#define wxUSE_RICHTEXT 1 // ---------------------------------------------------------------------------- // Data transfer @@ -797,10 +921,18 @@ // different from "built in" drag and drop in wxTreeCtrl which is always // available). Requires wxUSE_DATAOBJ. // +// Default is 1. +// +// Recommended setting: 1 +#define wxUSE_DRAG_AND_DROP 1 + +// Use wxAccessible for enhanced and customisable accessibility. +// Depends on wxUSE_OLE. +// // Default is 0. // -// Recommended WinCE setting: 0 -#define wxUSE_DRAG_AND_DROP 0 +// Recommended setting (at present): 0 +#define wxUSE_ACCESSIBILITY 0 // ---------------------------------------------------------------------------- // miscellaneous settings @@ -827,7 +959,7 @@ // Use wxHTML-based help controller? #define wxUSE_WXHTML_HELP 1 -#define wxUSE_RESOURCES 1 +#define wxUSE_RESOURCES 0 // 0 for no wxGetResource/wxWriteResource #define wxUSE_CONSTRAINTS 1 // 0 for no window layout constraint system @@ -835,23 +967,6 @@ #define wxUSE_SPLINES 1 // 0 for no splines -#define wxUSE_XPM_IN_MSW 1 - // 0 for no XPM support in wxBitmap. - // Default is 1, as XPM is now fully - // supported this makes easier the issue - // of portable icons and bitmaps. - -#define wxUSE_IMAGE_LOADING_IN_MSW 1 - // Use dynamic DIB loading/saving code in utils/dib under MSW. -#define wxUSE_RESOURCE_LOADING_IN_MSW 1 - // Use dynamic icon/cursor loading/saving code - // under MSW. -// use wxExpr (a.k.a. PrologIO) -#define wxUSE_PROLOGIO 0 - -#define wxUSE_WX_RESOURCES 0 - // Use .wxr resource mechanism (requires PrologIO library) - #define wxUSE_MOUSEWHEEL 1 // Include mouse wheel support @@ -863,18 +978,14 @@ #define wxUSE_POSTSCRIPT 0 // Set to 1 to use font metric files in GetTextExtent -#define wxUSE_AFM_FOR_POSTSCRIPT 0 - -// Set to 0 to disable PostScript print/preview architecture code under Windows -// (just use Windows printing). -#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 +#define wxUSE_AFM_FOR_POSTSCRIPT 1 // ---------------------------------------------------------------------------- // database classes // ---------------------------------------------------------------------------- // Define 1 to use ODBC classes -#define wxUSE_ODBC 1 +#define wxUSE_ODBC 0 // For backward compatibility reasons, this parameter now only controls the // default scrolling method used by cursors. This default behavior can be @@ -886,7 +997,7 @@ #define wxODBC_FWD_ONLY_CURSORS 1 // Default is 0. Set to 1 to use the deprecated classes, enum types, function, -// member variables. With a setting of 1, full backward compatability with the +// member variables. With a setting of 1, full backward compatibility with the // 2.0.x release is possible. It is STRONGLY recommended that this be set to 0, // as future development will be done only on the non-deprecated // functions/classes/member variables/etc. @@ -905,7 +1016,9 @@ #define REMOVE_UNUSED_ARG 1 // VC++ 4.2 and above allows and but you can't mix -// them. Set to 1 for , 0 for +// them. Set to 1 for , 0 for . Note that VC++ 7.1 +// and later doesn't support wxUSE_IOSTREAMH == 1 and so will be +// used anyhow. // // Default is 1. // @@ -957,18 +1070,12 @@ // Set to 1 to compile in wxPalette class #define wxUSE_PALETTE 1 +/* --- end common options --- */ + // ---------------------------------------------------------------------------- -// Windows-only settings +// general Windows-specific stuff // ---------------------------------------------------------------------------- -// Set this to 1 if you want to use wxWindows and MFC in the same program. This -// will override some other settings (see below) -// -// Default is 0. -// -// Recommended setting: 0 unless you really have to use MFC -#define wxUSE_MFC 0 - // Set this to 1 for generic OLE support: this is required for drag-and-drop, // clipboard, OLE Automation. Only set it to 0 if your compiler is very old and // can't compile/doesn't have the OLE headers. @@ -978,250 +1085,76 @@ // Recommended setting: 1 #define wxUSE_OLE 1 -// Set this to 1 to use Microsoft CTL3D library for "3D-look" under Win16 or NT -// 3.x. This setting is ignored under Win9x and NT 4.0+. -// -// Default is 0 for (most) Win32 (systems), 1 for Win16 -// -// Recommended setting: same as default -#if defined(__WIN95__) -#define wxUSE_CTL3D 0 -#else -#define wxUSE_CTL3D 1 -#endif - -// Define as 1 to use Microsoft's ItsyBitsy small title bar library, for -// wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native -// miniframes support instead. -// -// Default is 0 for (most) Win32 (systems), 1 for Win16 -// -// Recommended setting: same as default -#if defined(__WIN95__) -#define wxUSE_ITSY_BITSY 0 -#else -#define wxUSE_ITSY_BITSY 1 -#endif - -// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH -// which allows to put more than ~32Kb of text in it even under Win9x (NT -// doesn't have such limitation). -// -// Default is 1 for compilers which support it -// -// Recommended setting: 1, only set it to 0 if your compiler doesn't have -// or can't compile -#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__) -#define wxUSE_RICHEDIT 1 - -// TODO: This should be ifdef'ed for any compilers that don't support -// RichEdit 2.0 but do have RichEdit 1.0... -#define wxUSE_RICHEDIT2 1 - -#else -#define wxUSE_RICHEDIT 0 -#define wxUSE_RICHEDIT2 0 -#endif - -// Set this to 1 to enable support for the owner-drawn menu and listboxes. This -// is required by wxUSE_CHECKLISTBOX. -// -// Default is 1. -// -// Recommended setting: 1, set to 0 for a small library size reduction -#define wxUSE_OWNER_DRAWN 1 - -// ---------------------------------------------------------------------------- -// obsolete settings -// ---------------------------------------------------------------------------- - -// NB: all settings in this section are obsolete and should not be used/changed -// at all, they will disappear - -// Set to 1 to use PenWindows -#define wxUSE_PENWINDOWS 0 - -// Define 1 to use bitmap messages. -#define wxUSE_BITMAP_MESSAGE 1 - -// If 1, enables provision of run-time type information. -// NOW MANDATORY: don't change. -#define wxUSE_DYNAMIC_CLASSES 1 +// Set this to 1 to enable wxDIB (don't change unless you have reason to) +#define wxUSE_WXDIB 1 // ---------------------------------------------------------------------------- -// disable the settings which don't work for some compilers +// Windows CE specific stuff // ---------------------------------------------------------------------------- -#ifndef wxUSE_NORLANDER_HEADERS -#if (defined(__MINGW32__) || defined(__CYGWIN__)) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) -# define wxUSE_NORLANDER_HEADERS 1 -#else -# define wxUSE_NORLANDER_HEADERS 0 -#endif -#endif - -// wxUSE_DEBUG_NEW_ALWAYS doesn't work with CodeWarrior -#if defined(__MWERKS__) - #undef wxUSE_DEBUG_NEW_ALWAYS - #define wxUSE_DEBUG_NEW_ALWAYS 0 -#endif - -#if defined(__GNUWIN32__) -// These don't work as expected for mingw32 and cygwin32 -#undef wxUSE_MEMORY_TRACING -#define wxUSE_MEMORY_TRACING 0 - -#undef wxUSE_GLOBAL_MEMORY_OPERATORS -#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 - -#undef wxUSE_DEBUG_NEW_ALWAYS -#define wxUSE_DEBUG_NEW_ALWAYS 0 - -// Cygwin betas don't have wcslen -#if defined(__CYGWIN__) || defined(__CYGWIN32__) -# if ! ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) -# undef wxUSE_WCHAR_T -# define wxUSE_WCHAR_T 0 -# endif -#endif - -#endif // __GNUWIN32__ - -// MFC duplicates these operators -#if wxUSE_MFC -#undef wxUSE_GLOBAL_MEMORY_OPERATORS -#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 +// list of things which don't make sense under Windows CE in alphabetical order +// (please keep it!) +// +// NB: stuff which doesn't work at all under CE is forcefully disabled in +// wx/msw/wince/chkconf.h -#undef wxUSE_DEBUG_NEW_ALWAYS -#define wxUSE_DEBUG_NEW_ALWAYS 0 -#endif // wxUSE_MFC +// Windows CE doesn't use RAS so wxDialUpManager doesn't work under it +#undef wxUSE_DIALUP_MANAGER +#define wxUSE_DIALUP_MANAGER 0 -#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !wxUSE_NORLANDER_HEADERS) -// Can't use OLE drag and drop in Windows 3.1 because we don't know how -// to implement UUIDs -// GnuWin32 doesn't have appropriate headers for e.g. IUnknown. #undef wxUSE_DRAG_AND_DROP #define wxUSE_DRAG_AND_DROP 0 -#endif - -// Only WIN32 supports wxStatusBar95 -#if !defined(__WIN32__) && wxUSE_NATIVE_STATUSBAR -#undef wxUSE_NATIVE_STATUSBAR -#define wxUSE_NATIVE_STATUSBAR 0 -#endif -#if !wxUSE_OWNER_DRAWN -#undef wxUSE_CHECKLISTBOX -#define wxUSE_CHECKLISTBOX 0 -#endif +#undef wxUSE_FSVOLUME +#define wxUSE_FSVOLUME 0 -// Salford C++ doesn't like some of the memory operator definitions -#ifdef __SALFORDC__ -#undef wxUSE_MEMORY_TRACING -#define wxUSE_MEMORY_TRACING 0 +// MDI is not supported under CE +#undef wxUSE_MDI +#define wxUSE_MDI 0 -#undef wxUSE_GLOBAL_MEMORY_OPERATORS -#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 +#undef wxUSE_MDI_ARCHITECTURE +#define wxUSE_MDI_ARCHITECTURE 0 -#undef wxUSE_DEBUG_NEW_ALWAYS -#define wxUSE_DEBUG_NEW_ALWAYS 0 +// there is no difference between frame and mini frame decorations under CE +#undef wxUSE_MINIFRAME +#define wxUSE_MINIFRAME 0 -#undef wxUSE_THREADS -#define wxUSE_THREADS 0 +// no CHM support under CE +#undef wxUSE_MS_HTML_HELP +#define wxUSE_MS_HTML_HELP 0 +// ??? #undef wxUSE_OWNER_DRAWN #define wxUSE_OWNER_DRAWN 0 -#endif // __SALFORDC__ - -#ifdef __TWIN32__ - -#undef wxUSE_THREADS -#define wxUSE_THREADS 0 - -#undef wxUSE_ODBC -#define wxUSE_ODBC 0 - -#endif // __TWIN32__ - -// BC++/Win16 can't cope with the amount of data in resource.cpp -#if defined(__WIN16__) && defined(__BORLANDC__) -#undef wxUSE_WX_RESOURCES -#define wxUSE_WX_RESOURCES 0 -#undef wxUSE_ODBC -#define wxUSE_ODBC 0 - -#undef wxUSE_NEW_GRID -#define wxUSE_NEW_GRID 0 -#endif - -#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500) -// BC++ 4.0 can't compile JPEG library -#undef wxUSE_LIBJPEG -#define wxUSE_LIBJPEG 0 -#endif - -// wxUSE_DEBUG_NEW_ALWAYS = 1 not compatible with BC++ in DLL mode -#if defined(__BORLANDC__) && (defined(WXMAKINGDLL) || defined(WXUSINGDLL)) -#undef wxUSE_DEBUG_NEW_ALWAYS -#define wxUSE_DEBUG_NEW_ALWAYS 0 -#endif - -#if defined(__WXMSW__) && defined(__WATCOMC__) -/* -#undef wxUSE_GLCANVAS -#define wxUSE_GLCANVAS 0 -*/ - -#undef wxUSE_WCHAR_T -#define wxUSE_WCHAR_T 0 -#endif - -#if defined(__WXMSW__) && !defined(__WIN32__) - -#undef wxUSE_SOCKETS -#define wxUSE_SOCKETS 0 - -#undef wxUSE_THREADS -#define wxUSE_THREADS 0 +// there is usually no printer attached to a PDA... +#undef wxUSE_PRINTING_ARCHITECTURE +#define wxUSE_PRINTING_ARCHITECTURE 0 +// doesn't make much sense in absence of mouse... #undef wxUSE_TOOLTIPS #define wxUSE_TOOLTIPS 0 -#undef wxUSE_SPINCTRL -#define wxUSE_SPINCTRL 0 - -#undef wxUSE_SPINBTN -#define wxUSE_SPINBTN 0 - -#undef wxUSE_LIBPNG -#define wxUSE_LIBPNG 0 - -#undef wxUSE_LIBJPEG -#define wxUSE_LIBJPEG 0 - -#undef wxUSE_LIBTIFF -#define wxUSE_LIBTIFF 0 - -#undef wxUSE_GIF -#define wxUSE_GIF 0 - -#undef wxUSE_PNM -#define wxUSE_PNM 0 - -#undef wxUSE_PCX -#define wxUSE_PCX 0 +// Do use commdlg.h +#undef wxUSE_COMMON_DIALOGS +#define wxUSE_COMMON_DIALOGS 1 -#undef wxUSE_GLCANVAS -#define wxUSE_GLCANVAS 0 +// ---------------------------------------------------------------------------- +// Crash debugging helpers +// ---------------------------------------------------------------------------- -#undef wxUSE_MS_HTML_HELP -#define wxUSE_MS_HTML_HELP 0 +// Set this to 1 to be able to use wxCrashReport::Generate() to create mini +// dumps of your program when it crashes (or at any other moment) +// +// Default is 1 if supported by the compiler (VC++ and recent BC++ only). +// +// Recommended setting: 1, set to 0 if your programs never crash +#define wxUSE_CRASHREPORT 0 -#undef wxUSE_WCHAR_T -#define wxUSE_WCHAR_T 0 +// ---------------------------------------------------------------------------- +// obsolete MSW settings, don't change +// ---------------------------------------------------------------------------- -#endif // Win16 +#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0 -#endif - // _WX_SETUP_H_ +#endif // _WX_SETUP_H_