X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/36c9828f702fb504b07968703bcd82f04196070a..a25a17732c2d4d34d5d35a5318053dd8c6e29722:/docs/doxygen/overviews/string.h?ds=sidebyside diff --git a/docs/doxygen/overviews/string.h b/docs/doxygen/overviews/string.h index a8f67d014a..f74c6e3a2e 100644 --- a/docs/doxygen/overviews/string.h +++ b/docs/doxygen/overviews/string.h @@ -1,262 +1,394 @@ ///////////////////////////////////////////////////////////////////////////// -// Name: string +// Name: string.h // Purpose: topic overview // Author: wxWidgets team // RCS-ID: $Id$ // Licence: wxWindows license ///////////////////////////////////////////////////////////////////////////// -/*! - - @page string_overview wxString overview - - Classes: #wxString, #wxArrayString, #wxStringTokenizer - #Introduction - @ref otherstringclasses_overview - @ref stringadvices_overview - @ref relatedtostring_overview - @ref stringrefcount_overview - @ref stringtuning_overview - - - @section introductiontowxstring Introduction - - wxString is a class which represents a character string of arbitrary length (limited by - @e MAX_INT which is usually 2147483647 on 32 bit machines) and containing - arbitrary characters. The ASCII NUL character is allowed, but be aware that - in the current string implementation some methods might not work correctly - in this case. - wxString works with both ASCII (traditional, 7 or 8 bit, characters) as well as - Unicode (wide characters) strings. - This class has all the standard operations you can expect to find in a string class: - dynamic memory management (string extends to accommodate new characters), - construction from other strings, C strings and characters, assignment operators, - access to individual characters, string concatenation and comparison, substring - extraction, case conversion, trimming and padding (with spaces), searching and - replacing and both C-like #Printf() and stream-like - insertion functions as well as much more - see #wxString - for a list of all functions. - - @section otherstringclasses Comparison of wxString to other string classes - - The advantages of using a special string class instead of working directly with - C strings are so obvious that there is a huge number of such classes available. - The most important advantage is the need to always - remember to allocate/free memory for C strings; working with fixed size buffers almost - inevitably leads to buffer overflows. At last, C++ has a standard string class - (std::string). So why the need for wxString? - There are several advantages: - - - @b Efficiency This class was made to be as efficient as possible: both - in terms of size (each wxString objects takes exactly the same space as a @e char * pointer, sing @ref stringrefcount_overview) and speed. - It also provides performance @ref stringtuning_overview - which may be enabled to fine tune the memory allocation strategy for your - particular application - and the gain might be quite big. - @b Compatibility This class tries to combine almost full compatibility - with the old wxWidgets 1.xx wxString class, some reminiscence to MFC CString - class and 90% of the functionality of std::string class. - @b Rich set of functions Some of the functions present in wxString are - very useful but don't exist in most of other string classes: for example, - #AfterFirst, - #BeforeLast, #operator - or #Printf. Of course, all the standard string - operations are supported as well. - @b Unicode wxString is Unicode friendly: it allows to easily convert - to and from ANSI and Unicode strings in any build mode (see the - @ref unicode_overview for more details) and maps to either - @c string or @c wstring transparently depending on the current mode. - @b Used by wxWidgets And, of course, this class is used everywhere - inside wxWidgets so there is no performance loss which would result from - conversions of objects of any other string class (including std::string) to - wxString internally by wxWidgets. - - - However, there are several problems as well. The most important one is probably - that there are often several functions to do exactly the same thing: for - example, to get the length of the string either one of - length(), #Len() or - #Length() may be used. The first function, as almost - all the other functions in lowercase, is std::string compatible. The second one - is "native" wxString version and the last one is wxWidgets 1.xx way. So the - question is: which one is better to use? And the answer is that: - @b The usage of std::string compatible functions is strongly advised! It will - both make your code more familiar to other C++ programmers (who are supposed to - have knowledge of std::string but not of wxString), let you reuse the same code - in both wxWidgets and other programs (by just typedefing wxString as std::string - when used outside wxWidgets) and by staying compatible with future versions of - wxWidgets which will probably start using std::string sooner or later too. - In the situations where there is no corresponding std::string function, please - try to use the new wxString methods and not the old wxWidgets 1.xx variants - which are deprecated and may disappear in future versions. - - @section wxstringadvices Some advice about using wxString - - Probably the main trap with using this class is the implicit conversion operator to - @e const char *. It is advised that you use #c_str() - instead to clearly indicate when the conversion is done. Specifically, the - danger of this implicit conversion may be seen in the following code fragment: - - @code - // this function converts the input string to uppercase, output it to the screen - // and returns the result - const char *SayHELLO(const wxString& input) - { - wxString output = input.Upper(); - - printf("Hello, %s!\n", output); - - return output; - } - @endcode - - There are two nasty bugs in these three lines. First of them is in the call to the - @e printf() function. Although the implicit conversion to C strings is applied - automatically by the compiler in the case of - - @code - puts(output); - @endcode - - because the argument of @e puts() is known to be of the type @e const char *, - this is @b not done for @e printf() which is a function with variable - number of arguments (and whose arguments are of unknown types). So this call may - do anything at all (including displaying the correct string on screen), although - the most likely result is a program crash. The solution is to use - #c_str(): just replace this line with - - @code - printf("Hello, %s!\n", output.c_str()); - @endcode - - The second bug is that returning @e output doesn't work. The implicit cast is - used again, so the code compiles, but as it returns a pointer to a buffer - belonging to a local variable which is deleted as soon as the function exits, - its contents is totally arbitrary. The solution to this problem is also easy: - just make the function return wxString instead of a C string. - This leads us to the following general advice: all functions taking string - arguments should take @e const wxString (this makes assignment to the - strings inside the function faster because of - @ref stringrefcount_overview) and all functions returning - strings should return @e wxString - this makes it safe to return local - variables. - - @section relatedtostring Other string related functions and classes - - As most programs use character strings, the standard C library provides quite - a few functions to work with them. Unfortunately, some of them have rather - counter-intuitive behaviour (like strncpy() which doesn't always terminate the - resulting string with a @NULL) and are in general not very safe (passing @NULL - to them will probably lead to program crash). Moreover, some very useful - functions are not standard at all. This is why in addition to all wxString - functions, there are also a few global string functions which try to correct - these problems: #wxIsEmpty() verifies whether the string - is empty (returning @true for @NULL pointers), - #wxStrlen() also handles @NULLs correctly and returns 0 for - them and #wxStricmp() is just a platform-independent - version of case-insensitive string comparison function known either as - stricmp() or strcasecmp() on different platforms. - The @c wx/string.h header also defines #wxSnprintf - and #wxVsnprintf functions which should be used instead - of the inherently dangerous standard @c sprintf() and which use @c snprintf() instead which does buffer size checks whenever possible. Of - course, you may also use wxString::Printf which is - also safe. - There is another class which might be useful when working with wxString: - #wxStringTokenizer. It is helpful when a string must - be broken into tokens and replaces the standard C library @e strtok() function. - And the very last string-related class is #wxArrayString: it - is just a version of the "template" dynamic array class which is specialized to work - with strings. Please note that this class is specially optimized (using its - knowledge of the internal structure of wxString) for storing strings and so it is - vastly better from a performance point of view than a wxObjectArray of wxStrings. - - @section wxstringrefcount Reference counting and why you shouldn't care about it - - All considerations for wxObject-derived @ref trefcount_overview objects - are valid also for wxString, even if it does not derive from wxObject. - Probably the unique case when you might want to think about reference - counting is when a string character is taken from a string which is not a - constant (or a constant reference). In this case, due to C++ rules, the - "read-only" @e operator[] (which is the same as - #GetChar()) cannot be chosen and the "read/write" - @e operator[] (the same as - #GetWritableChar()) is used instead. As the - call to this operator may modify the string, its data is unshared (COW is done) - and so if the string was really shared there is some performance loss (both in - terms of speed and memory consumption). In the rare cases when this may be - important, you might prefer using #GetChar() instead - of the array subscript operator for this reasons. Please note that - #at() method has the same problem as the subscript operator in - this situation and so using it is not really better. Also note that if all - string arguments to your functions are passed as @e const wxString (see the - section @ref stringadvices_overview) this situation will almost - never arise because for constant references the correct operator is called automatically. - - @section wxstringtuning Tuning wxString for your application - - - @b Note: this section is strictly about performance issues and is - absolutely not necessary to read for using wxString class. Please skip it unless - you feel familiar with profilers and relative tools. If you do read it, please - also read the preceding section about - @ref stringrefcount_overview. - - For the performance reasons wxString doesn't allocate exactly the amount of - memory needed for each string. Instead, it adds a small amount of space to each - allocated block which allows it to not reallocate memory (a relatively - expensive operation) too often as when, for example, a string is constructed by - subsequently adding one character at a time to it, as for example in: - - @code - // delete all vowels from the string - wxString DeleteAllVowels(const wxString& original) - { - wxString result; - - size_t len = original.length(); - for ( size_t n = 0; n len; n++ ) - { - if ( strchr("aeuio", tolower(original[n])) == @NULL ) - result += original[n]; - } - - return result; - } - @endcode - - This is quite a common situation and not allocating extra memory at all would - lead to very bad performance in this case because there would be as many memory - (re)allocations as there are consonants in the original string. Allocating too - much extra memory would help to improve the speed in this situation, but due to - a great number of wxString objects typically used in a program would also - increase the memory consumption too much. - The very best solution in precisely this case would be to use - #Alloc() function to preallocate, for example, len bytes - from the beginning - this will lead to exactly one memory allocation being - performed (because the result is at most as long as the original string). - However, using Alloc() is tedious and so wxString tries to do its best. The - default algorithm assumes that memory allocation is done in granularity of at - least 16 bytes (which is the case on almost all of wide-spread platforms) and so - nothing is lost if the amount of memory to allocate is rounded up to the next - multiple of 16. Like this, no memory is lost and 15 iterations from 16 in the - example above won't allocate memory but use the already allocated pool. - The default approach is quite conservative. Allocating more memory may bring - important performance benefits for programs using (relatively) few very long - strings. The amount of memory allocated is configured by the setting of @e EXTRA_ALLOC in the file string.cpp during compilation (be sure to understand - why its default value is what it is before modifying it!). You may try setting - it to greater amount (say twice nLen) or to 0 (to see performance degradation - which will follow) and analyse the impact of it on your program. If you do it, - you will probably find it helpful to also define WXSTRING_STATISTICS symbol - which tells the wxString class to collect performance statistics and to show - them on stderr on program termination. This will show you the average length of - strings your program manipulates, their average initial length and also the - percent of times when memory wasn't reallocated when string concatenation was - done but the already preallocated memory was used (this value should be about - 98% for the default allocation policy, if it is less than 90% you should - really consider fine tuning wxString for your application). - It goes without saying that a profiler should be used to measure the precise - difference the change to EXTRA_ALLOC makes to your program. - - */ +/** +@page overview_string wxString Overview + +Classes: wxString, wxArrayString, wxStringTokenizer + +@li @ref overview_string_intro +@li @ref overview_string_internal +@li @ref overview_string_binary +@li @ref overview_string_comparison +@li @ref overview_string_advice +@li @ref overview_string_related +@li @ref overview_string_tuning +@li @ref overview_string_settings + + +
+ + +@section overview_string_intro Introduction + +wxString is a class which represents a Unicode string of arbitrary length and +containing arbitrary Unicode characters. + +This class has all the standard operations you can expect to find in a string +class: dynamic memory management (string extends to accommodate new +characters), construction from other strings, compatibility with C strings and +wide character C strings, assignment operators, access to individual characters, string +concatenation and comparison, substring extraction, case conversion, trimming and +padding (with spaces), searching and replacing and both C-like @c printf (wxString::Printf) +and stream-like insertion functions as well as much more - see wxString for a +list of all functions. + +The wxString class has been completely rewritten for wxWidgets 3.0 but much work +has been done to make existing code using ANSI string literals work as it did +in previous versions. + + +@section overview_string_internal Internal wxString encoding + +Since wxWidgets 3.0 wxString internally uses UTF-16 (with Unicode +code units stored in @c wchar_t) under Windows and UTF-8 (with Unicode +code units stored in @c char) under Unix, Linux and Mac OS X to store its content. + +For definitions of code units and code points terms, please +see the @ref overview_unicode_encodings paragraph. + +For simplicity of implementation, wxString when wxUSE_UNICODE_WCHAR==1 +(e.g. on Windows) uses per code unit indexing instead of +per code point indexing and doesn't know anything about surrogate pairs; +in other words it always considers code points to be composed by 1 code unit, +while this is really true only for characters in the @e BMP (Basic Multilingual Plane). +Thus when iterating over a UTF-16 string stored in a wxString under Windows, the user +code has to take care of surrogate pairs himself. +(Note however that Windows itself has built-in support for surrogate pairs in UTF-16, +such as for drawing strings on screen.) + +@remarks +Note that while the behaviour of wxString when wxUSE_UNICODE_WCHAR==1 +resembles UCS-2 encoding, it's not completely correct to refer to wxString as +UCS-2 encoded since you can encode code points outside the @e BMP in a wxString +as two code units (i.e. as a surrogate pair; as already mentioned however wxString +will "see" them as two different code points) + +When instead wxUSE_UNICODE_UTF8==1 (e.g. on Linux and Mac OS X) +wxString handles UTF8 multi-bytes sequences just fine also for characters outside +the BMP (it implements per code point indexing), so that you can use +UTF8 in a completely transparent way: + +Example: +@code + // first test, using exotic characters outside of the Unicode BMP: + + wxString test = wxString::FromUTF8("\xF0\x90\x8C\x80"); + // U+10300 is "OLD ITALIC LETTER A" and is part of Unicode Plane 1 + // in UTF8 it's encoded as 0xF0 0x90 0x8C 0x80 + + // it's a single Unicode code-point encoded as: + // - a UTF16 surrogate pair under Windows + // - a UTF8 multiple-bytes sequence under Linux + // (without considering the final NULL) + + wxPrintf("wxString reports a length of %d character(s)", test.length()); + // prints "wxString reports a length of 1 character(s)" on Linux + // prints "wxString reports a length of 2 character(s)" on Windows + // since wxString on Windows doesn't have surrogate pairs support! + + + // second test, this time using characters part of the Unicode BMP: + + wxString test2 = wxString::FromUTF8("\x41\xC3\xA0\xE2\x82\xAC"); + // this is the UTF8 encoding of capital letter A followed by + // 'small case letter a with grave' followed by the 'euro sign' + + // they are 3 Unicode code-points encoded as: + // - 3 UTF16 code units under Windows + // - 6 UTF8 code units under Linux + // (without considering the final NULL) + + wxPrintf("wxString reports a length of %d character(s)", test2.length()); + // prints "wxString reports a length of 3 character(s)" on Linux + // prints "wxString reports a length of 3 character(s)" on Windows +@endcode + +To better explain what stated above, consider the second string of the example +above; it's composed by 3 characters and the final @c NULL: + +@image html overview_wxstring_encoding.png + +As you can see, UTF16 encoding is straightforward (for characters in the @e BMP) +and in this example the UTF16-encoded wxString takes 8 bytes. +UTF8 encoding is more elaborated and in this example takes 7 bytes. + +In general, for strings containing many latin characters UTF8 provides a big +advantage with regards to the memory footprint respect UTF16, but requires some +more processing for common operations like e.g. length calculation. + +Finally, note that the type used by wxString to store Unicode code units +(@c wchar_t or @c char) is always @c typedef-ined to be ::wxStringCharType. + + +@section overview_string_binary Using wxString to store binary data + +wxString can be used to store binary data (even if it contains @c NULs) using the +functions wxString::To8BitData and wxString::From8BitData. + +Beware that even if @c NUL character is allowed, in the current string implementation +some methods might not work correctly with them. + +Note however that other classes like wxMemoryBuffer are more suited to this task. +For handling binary data you may also want to look at the wxStreamBuffer, +wxMemoryOutputStream, wxMemoryInputStream classes. + + +@section overview_string_comparison Comparison to Other String Classes + +The advantages of using a special string class instead of working directly with +C strings are so obvious that there is a huge number of such classes available. +The most important advantage is the need to always remember to allocate/free +memory for C strings; working with fixed size buffers almost inevitably leads +to buffer overflows. At last, C++ has a standard string class (@c std::string). So +why the need for wxString? There are several advantages: + +@li Efficiency: Since wxWidgets 3.0 wxString uses @c std::string (in UTF8 + mode under Linux, Unix and OS X) or @c std::wstring (in UTF16 mode under Windows) + internally by default to store its contents. wxString will therefore inherit the + performance characteristics from @c std::string. +@li Compatibility: This class tries to combine almost full compatibility + with the old wxWidgets 1.xx wxString class, some reminiscence of MFC's + CString class and 90% of the functionality of @c std::string class. +@li Rich set of functions: Some of the functions present in wxString are + very useful but don't exist in most of other string classes: for example, + wxString::AfterFirst, wxString::BeforeLast, wxString::Printf. + Of course, all the standard string operations are supported as well. +@li wxString is Unicode friendly: it allows to easily convert to + and from ANSI and Unicode strings (see @ref overview_unicode + for more details) and maps to @c std::wstring transparently. +@li Used by wxWidgets: And, of course, this class is used everywhere + inside wxWidgets so there is no performance loss which would result from + conversions of objects of any other string class (including @c std::string) to + wxString internally by wxWidgets. + +However, there are several problems as well. The most important one is probably +that there are often several functions to do exactly the same thing: for +example, to get the length of the string either one of wxString::length(), +wxString::Len() or wxString::Length() may be used. The first function, as +almost all the other functions in lowercase, is @c std::string compatible. The +second one is the "native" wxString version and the last one is the wxWidgets +1.xx way. + +So which is better to use? The usage of the @c std::string compatible functions is +strongly advised! It will both make your code more familiar to other C++ +programmers (who are supposed to have knowledge of @c std::string but not of +wxString), let you reuse the same code in both wxWidgets and other programs (by +just typedefing wxString as @c std::string when used outside wxWidgets) and by +staying compatible with future versions of wxWidgets which will probably start +using @c std::string sooner or later too. + +In the situations where there is no corresponding @c std::string function, please +try to use the new wxString methods and not the old wxWidgets 1.xx variants +which are deprecated and may disappear in future versions. + + +@section overview_string_advice Advice About Using wxString + +@subsection overview_string_implicitconv Implicit conversions + +Probably the main trap with using this class is the implicit conversion +operator to const char*. It is advised that you use wxString::c_str() +instead to clearly indicate when the conversion is done. Specifically, the +danger of this implicit conversion may be seen in the following code fragment: + +@code +// this function converts the input string to uppercase, +// output it to the screen and returns the result +const char *SayHELLO(const wxString& input) +{ + wxString output = input.Upper(); + printf("Hello, %s!\n", output); + return output; +} +@endcode + +There are two nasty bugs in these three lines. The first is in the call to the +@c printf() function. Although the implicit conversion to C strings is applied +automatically by the compiler in the case of + +@code +puts(output); +@endcode + +because the argument of @c puts() is known to be of the type +const char*, this is @b not done for @c printf() which is a function +with variable number of arguments (and whose arguments are of unknown types). +So this call may do any number of things (including displaying the correct +string on screen), although the most likely result is a program crash. +The solution is to use wxString::c_str(). Just replace this line with this: + +@code +printf("Hello, %s!\n", output.c_str()); +@endcode + +The second bug is that returning @c output doesn't work. The implicit cast is +used again, so the code compiles, but as it returns a pointer to a buffer +belonging to a local variable which is deleted as soon as the function exits, +its contents are completely arbitrary. The solution to this problem is also +easy, just make the function return wxString instead of a C string. + +This leads us to the following general advice: all functions taking string +arguments should take const wxString& (this makes assignment to the +strings inside the function faster) and all functions returning strings +should return wxString - this makes it safe to return local variables. + +Finally note that wxString uses the current locale encoding to convert any C string +literal to Unicode. The same is done for converting to and from @c std::string +and for the return value of c_str(). +For this conversion, the @a wxConvLibc class instance is used. +See wxCSConv and wxMBConv. + + +@subsection overview_string_iterating Iterating wxString's characters + +As previously described, when wxUSE_UNICODE_UTF8==1, wxString internally +uses the variable-length UTF8 encoding. +Accessing a UTF-8 string by index can be very @b inefficient because +a single character is represented by a variable number of bytes so that +the entire string has to be parsed in order to find the character. +Since iterating over a string by index is a common programming technique and +was also possible and encouraged by wxString using the access operator[]() +wxString implements caching of the last used index so that iterating over +a string is a linear operation even in UTF-8 mode. + +It is nonetheless recommended to use @b iterators (instead of index based +access) like this: + +@code +wxString s = "hello"; +wxString::const_iterator i; +for (i = s.begin(); i != s.end(); ++i) +{ + wxUniChar uni_ch = *i; + // do something with it +} +@endcode + + + +@section overview_string_related String Related Functions and Classes + +As most programs use character strings, the standard C library provides quite +a few functions to work with them. Unfortunately, some of them have rather +counter-intuitive behaviour (like @c strncpy() which doesn't always terminate +the resulting string with a @NULL) and are in general not very safe (passing +@NULL to them will probably lead to program crash). Moreover, some very useful +functions are not standard at all. This is why in addition to all wxString +functions, there are also a few global string functions which try to correct +these problems: wxIsEmpty() verifies whether the string is empty (returning +@true for @NULL pointers), wxStrlen() also handles @NULL correctly and returns +0 for them and wxStricmp() is just a platform-independent version of +case-insensitive string comparison function known either as @c stricmp() or +@c strcasecmp() on different platforms. + +The @ header also defines ::wxSnprintf and ::wxVsnprintf +functions which should be used instead of the inherently dangerous standard +@c sprintf() and which use @c snprintf() instead which does buffer size checks +whenever possible. Of course, you may also use wxString::Printf which is also +safe. + +There is another class which might be useful when working with wxString: +wxStringTokenizer. It is helpful when a string must be broken into tokens and +replaces the standard C library @c strtok() function. + +And the very last string-related class is wxArrayString: it is just a version +of the "template" dynamic array class which is specialized to work with +strings. Please note that this class is specially optimized (using its +knowledge of the internal structure of wxString) for storing strings and so it +is vastly better from a performance point of view than a wxObjectArray of +wxStrings. + + +@section overview_string_tuning Tuning wxString for Your Application + +@note This section is strictly about performance issues and is absolutely not +necessary to read for using wxString class. Please skip it unless you feel +familiar with profilers and relative tools. + +For the performance reasons wxString doesn't allocate exactly the amount of +memory needed for each string. Instead, it adds a small amount of space to each +allocated block which allows it to not reallocate memory (a relatively +expensive operation) too often as when, for example, a string is constructed by +subsequently adding one character at a time to it, as for example in: + +@code +// delete all vowels from the string +wxString DeleteAllVowels(const wxString& original) +{ + wxString vowels( "aeuioAEIOU" ); + wxString result; + wxString::const_iterator i; + for ( i = original.begin(); i != original.end(); ++i ) + { + if (vowels.Find( *i ) == wxNOT_FOUND) + result += *i; + } + + return result; +} +@endcode + +This is quite a common situation and not allocating extra memory at all would +lead to very bad performance in this case because there would be as many memory +(re)allocations as there are consonants in the original string. Allocating too +much extra memory would help to improve the speed in this situation, but due to +a great number of wxString objects typically used in a program would also +increase the memory consumption too much. + +The very best solution in precisely this case would be to use wxString::Alloc() +function to preallocate, for example, len bytes from the beginning - this will +lead to exactly one memory allocation being performed (because the result is at +most as long as the original string). + +However, using wxString::Alloc() is tedious and so wxString tries to do its +best. The default algorithm assumes that memory allocation is done in +granularity of at least 16 bytes (which is the case on almost all of +wide-spread platforms) and so nothing is lost if the amount of memory to +allocate is rounded up to the next multiple of 16. Like this, no memory is lost +and 15 iterations from 16 in the example above won't allocate memory but use +the already allocated pool. + +The default approach is quite conservative. Allocating more memory may bring +important performance benefits for programs using (relatively) few very long +strings. The amount of memory allocated is configured by the setting of +@c EXTRA_ALLOC in the file string.cpp during compilation (be sure to understand +why its default value is what it is before modifying it!). You may try setting +it to greater amount (say twice nLen) or to 0 (to see performance degradation +which will follow) and analyse the impact of it on your program. If you do it, +you will probably find it helpful to also define @c WXSTRING_STATISTICS symbol +which tells the wxString class to collect performance statistics and to show +them on stderr on program termination. This will show you the average length of +strings your program manipulates, their average initial length and also the +percent of times when memory wasn't reallocated when string concatenation was +done but the already preallocated memory was used (this value should be about +98% for the default allocation policy, if it is less than 90% you should +really consider fine tuning wxString for your application). + +It goes without saying that a profiler should be used to measure the precise +difference the change to @c EXTRA_ALLOC makes to your program. + + +@section overview_string_settings wxString Related Compilation Settings + +Much work has been done to make existing code using ANSI string literals +work as before version 3.0. + +If you nonetheless need to have a wxString that uses @c wchar_t +on Unix and Linux, too, you can specify this on the command line with the +@c configure @c --disable-utf8 switch or you can consider using wxUString +or @c std::wstring instead. + +@c wxUSE_UNICODE is now defined as @c 1 by default to indicate Unicode support. +If UTF-8 is used for the internal storage in wxString, @c wxUSE_UNICODE_UTF8 is +also defined, otherwise @c wxUSE_UNICODE_WCHAR is. +See also @ref page_wxusedef_important. + +*/