X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/294e9a7aa00c23de9aad973b3998071b81159aee..9379c0d752144826342fa2688a77aa5cccea3d9b:/docs/latex/wx/file.tex

diff --git a/docs/latex/wx/file.tex b/docs/latex/wx/file.tex
index 73b55f5b24..bc58192219 100644
--- a/docs/latex/wx/file.tex
+++ b/docs/latex/wx/file.tex
@@ -1,9 +1,27 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% Name:        file.tex
+%% Purpose:     wxFile documentation
+%% Author:      Vadim Zeitlin
+%% Modified by:
+%% Created:     14.01.02 (extracted from file.tex)
+%% RCS-ID:      $Id$
+%% Copyright:   (c) Vadim Zeitlin
+%% License:     wxWindows license
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
 \section{\class{wxFile}}\label{wxfile}
 
 A wxFile performs raw file I/O. This is a very small class designed to
 minimize the overhead of using it - in fact, there is hardly any overhead at
 all, but using it brings you automatic error checking and hides differences
-between platforms and compilers.
+between platforms and compilers. wxFile also automatically closes the file in
+its destructor making it unnecessary to worry about forgetting to do it.
+wxFile is a wrapper around {\tt file descriptor.} - see also 
+\helpref{wxFFile}{wxffile} for a wrapper around {\tt FILE} structure.
+
+{\tt wxFileOffset} is used by the wxFile functions which require offsets as 
+parameter or return them. If the platform supports it, wxFileOffset if a typedef
+for a native 64 bit integer, else a 32 bit integer is used for wxFileOffset.
 
 \wxheading{Derived from}
 
@@ -17,7 +35,6 @@ None.
 
 wx/file.h defines the following constants:
 
-{\small
 \begin{verbatim}
 #define wxS_IRUSR 00400
 #define wxS_IWUSR 00200
@@ -34,13 +51,12 @@ wx/file.h defines the following constants:
 // default mode for the new files: corresponds to umask 022
 #define wxS_DEFAULT  (wxS_IRUSR | wxS_IWUSR | wxS_IRGRP | wxS_IWGRP | wxS_IROTH | wxS_IWOTH)
 \end{verbatim}
-}
 
 These constants define the file access rights and are used with 
 \helpref{wxFile::Create}{wxfilecreate} and \helpref{wxFile::Open}{wxfileopen}.
 
 The {\it OpenMode} enumeration defines the different modes for opening a file,
-it's defined inside wxFile class so its members should be specified with {\it wxFile::} scope
+it is defined inside wxFile class so its members should be specified with {\it wxFile::} scope
 resolution prefix. It is also used with \helpref{wxFile::Access}{wxfileaccess} function.
 
 \twocolwidtha{7cm}
@@ -51,11 +67,14 @@ or test if it can be opened for writing with Access()}
 \twocolitem{{\bf wxFile::read\_write}}{Open file for reading and writing; can not be used with Access()}
 \twocolitem{{\bf wxFile::write\_append}}{Open file for appending: the file is opened for writing, but the old
 contents of the file is not erased and the file pointer is initially placed at the end of the file;
-can not be used with Access()}
+can not be used with Access(). This is the same as {\bf wxFile::write} if the
+file doesn't exist.}
+\twocolitem{{\bf wxFile::write\_excl}}{Open the file securely for writing (Uses O\_EXCL | O\_CREAT).
+Will fail if the file already exists, else create and open it atomically.  Useful for opening temporary files without being vulnerable to race exploits.}
 \end{twocollist}
 
 Other constants defined elsewhere but used by wxFile functions are wxInvalidOffset which represents an
-invalid value of type {\it off\_t} and is returned by functions returning {\it off\_t} on error and the seek
+invalid value of type {\it wxFileOffset} and is returned by functions returning {\it wxFileOffset} on error and the seek
 mode constants used with \helpref{Seek()}{wxfileseek}:
 
 \twocolwidtha{7cm}
@@ -67,7 +86,8 @@ mode constants used with \helpref{Seek()}{wxfileseek}:
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
-\membersection{wxFile::wxFile}\label{wxfileconstr}
+
+\membersection{wxFile::wxFile}\label{wxfilector}
 
 \func{}{wxFile}{\void}
 
@@ -82,7 +102,7 @@ fail.
 
 \func{}{wxFile}{\param{int}{ fd}}
 
-Opens a file with the given file descriptor, which has already been opened.
+Associates the file with the given file descriptor, which has already been opened.
 
 \wxheading{Parameters}
 
@@ -92,13 +112,15 @@ Opens a file with the given file descriptor, which has already been opened.
 
 \docparam{fd}{An existing file descriptor (see \helpref{Attach()}{wxfileattach} for the list of predefined descriptors)}
 
-\membersection{wxFile::\destruct{wxFile}}
+
+\membersection{wxFile::\destruct{wxFile}}\label{wxfiledtor}
 
 \func{}{\destruct{wxFile}}{\void}
 
 Destructor will close the file.
 
-NB: it is not virtual so you should {\it not} derive from wxFile!
+{\bf NB:} it is not virtual so you should not use wxFile polymorphically.
+
 
 \membersection{wxFile::Access}\label{wxfileaccess}
 
@@ -107,36 +129,41 @@ NB: it is not virtual so you should {\it not} derive from wxFile!
 This function verifies if we may access the given file in specified mode. Only
 values of wxFile::read or wxFile::write really make sense here.
 
+
 \membersection{wxFile::Attach}\label{wxfileattach}
 
 \func{void}{Attach}{\param{int}{ fd}}
 
 Attaches an existing file descriptor to the wxFile object. Example of predefined
 file descriptors are 0, 1 and 2 which correspond to stdin, stdout and stderr (and
-have symbolic names of wxFile::fd\_stdin, wxFile::fd\_stdout and wxFile::fd\_stderr).
+have symbolic names of {\bf wxFile::fd\_stdin}, {\bf wxFile::fd\_stdout} and {\bf wxFile::fd\_stderr}).
 
 The descriptor should be already opened and it will be closed by wxFile
 object.
 
+
 \membersection{wxFile::Close}\label{wxfileclose}
 
 \func{void}{Close}{\void}
 
 Closes the file.
 
+
 \membersection{wxFile::Create}\label{wxfilecreate}
 
-\func{bool}{Create}{\param{const char*}{ filename}, \param{bool}{ overwrite = FALSE}, \param{int }{access = wxS\_DEFAULT}}
+\func{bool}{Create}{\param{const char*}{ filename}, \param{bool}{ overwrite = false}, \param{int }{access = wxS\_DEFAULT}}
 
-Creates a file for writing. If the file already exists, setting {\bf overwrite} to TRUE
+Creates a file for writing. If the file already exists, setting {\bf overwrite} to true
 will ensure it is overwritten.
 
+
 \membersection{wxFile::Detach}\label{wxfiledetach}
 
 \func{void}{Detach}{\void}
 
 Get back a file descriptor from wxFile object - the caller is responsible for closing the file if this
-descriptor is opened. \helpref{IsOpened()}{wxfileisopened} will return FALSE after call to Detach().
+descriptor is opened. \helpref{IsOpened()}{wxfileisopened} will return false after call to Detach().
+
 
 \membersection{wxFile::fd}\label{wxfilefd}
 
@@ -144,17 +171,35 @@ descriptor is opened. \helpref{IsOpened()}{wxfileisopened} will return FALSE aft
 
 Returns the file descriptor associated with the file.
 
+
 \membersection{wxFile::Eof}\label{wxfileeof}
 
 \constfunc{bool}{Eof}{\void}
 
-Returns TRUE if the end of the file has been reached.
+Returns true if the end of the file has been reached.
+
+Note that the behaviour of the file pointer based class 
+\helpref{wxFFile}{wxffile} is different as \helpref{wxFFile::Eof}{wxffileeof} 
+will return true here only if an attempt has been made to read 
+{\it past} the last byte of the file, while wxFile::Eof() will return true
+even before such attempt is made if the file pointer is at the last position
+in the file.
+
+Note also that this function doesn't work on unseekable file descriptors
+(examples include pipes, terminals and sockets under Unix) and an attempt to
+use it will result in an error message in such case. So, to read the entire
+file into memory, you should write a loop which uses 
+\helpref{Read}{wxfileread} repeatedly and tests its return condition instead
+of using Eof() as this will not work for special files under Unix.
+
 
 \membersection{wxFile::Exists}\label{wxfileexists}
 
 \func{static bool}{Exists}{\param{const char*}{ filename}}
 
-Returns TRUE if the given name specifies an existing regular file.
+Returns true if the given name specifies an existing regular file (not a
+directory or a link)
+
 
 \membersection{wxFile::Flush}\label{wxfileflush}
 
@@ -166,23 +211,44 @@ Note that wxFile::Flush is not implemented on some Windows compilers
 due to a missing fsync function, which reduces the usefulness of this function
 (it can still be called but it will do nothing on unsupported compilers).
 
+
+\membersection{wxFile::GetKind}\label{wxfilegetfilekind}
+
+\constfunc{wxFileKind}{GetKind}{\void}
+
+Returns the type of the file. Possible return values are:
+
+\begin{verbatim}
+enum wxFileKind
+{
+  wxFILE_KIND_UNKNOWN,
+  wxFILE_KIND_DISK,     // a file supporting seeking to arbitrary offsets
+  wxFILE_KIND_TERMINAL, // a tty
+  wxFILE_KIND_PIPE      // a pipe
+};
+
+\end{verbatim}
+
+
 \membersection{wxFile::IsOpened}\label{wxfileisopened}
 
 \constfunc{bool}{IsOpened}{\void}
 
-Returns TRUE if the file has been opened.
+Returns true if the file has been opened.
+
 
 \membersection{wxFile::Length}\label{wxfilelength}
 
-\constfunc{off\_t}{Length}{\void}
+\constfunc{wxFileOffset}{Length}{\void}
 
 Returns the length of the file.
 
+
 \membersection{wxFile::Open}\label{wxfileopen}
 
 \func{bool}{Open}{\param{const char*}{ filename}, \param{wxFile::OpenMode}{ mode = wxFile::read}}
 
-Opens the file, returning TRUE if successful.
+Opens the file, returning true if successful.
 
 \wxheading{Parameters}
 
@@ -190,9 +256,10 @@ Opens the file, returning TRUE if successful.
 
 \docparam{mode}{The mode in which to open the file. May be one of {\bf wxFile::read}, {\bf wxFile::write} and {\bf wxFile::read\_write}.}
 
+
 \membersection{wxFile::Read}\label{wxfileread}
 
-\func{off\_t}{Read}{\param{void*}{ buffer}, \param{off\_t}{ count}}
+\func{size\_t}{Read}{\param{void*}{ buffer}, \param{size\_t}{ count}}
 
 Reads the specified number of bytes into a buffer, returning the actual number read.
 
@@ -206,9 +273,10 @@ Reads the specified number of bytes into a buffer, returning the actual number r
 
 The number of bytes read, or the symbol {\bf wxInvalidOffset} (-1) if there was an error.
 
+
 \membersection{wxFile::Seek}\label{wxfileseek}
 
-\func{off\_t}{Seek}{\param{off\_t }{ofs}, \param{wxFile::SeekMode }{mode = wxFile::FromStart}}
+\func{wxFileOffset}{Seek}{\param{wxFileOffset }{ofs}, \param{wxSeekMode }{mode = wxFromStart}}
 
 Seeks to the specified position.
 
@@ -216,17 +284,20 @@ Seeks to the specified position.
 
 \docparam{ofs}{Offset to seek to.}
 
-\docparam{mode}{One of {\bf wxFile::FromStart}, {\bf wxFile::FromEnd}, {\bf wxFile::FromCurrent}.}
+\docparam{mode}{One of {\bf wxFromStart}, {\bf wxFromEnd}, {\bf wxFromCurrent}.}
 
 \wxheading{Return value}
 
 The actual offset position achieved, or wxInvalidOffset on failure.
 
+
 \membersection{wxFile::SeekEnd}\label{wxfileseekend}
 
-\func{off\_t}{SeekEnd}{\param{off\_t }{ofs = 0}}
+\func{wxFileOffset}{SeekEnd}{\param{wxFileOffset }{ofs = 0}}
 
-Moves the file pointer to the specified number of bytes before the end of the file.
+Moves the file pointer to the specified number of bytes relative to the end of
+the file. For example, \texttt{SeekEnd($-5$)} would position the pointer $5$
+bytes before the end.
 
 \wxheading{Parameters}
 
@@ -236,16 +307,18 @@ Moves the file pointer to the specified number of bytes before the end of the fi
 
 The actual offset position achieved, or wxInvalidOffset on failure.
 
+
 \membersection{wxFile::Tell}\label{wxfiletell}
 
-\constfunc{off\_t}{Tell}{\void}
+\constfunc{wxFileOffset}{Tell}{\void}
 
 Returns the current position or wxInvalidOffset if file is not opened or if another
-error occured.
+error occurred.
+
 
 \membersection{wxFile::Write}\label{wxfilewrite}
 
-\func{bool}{Write}{\param{const void*}{ buffer}, \param{off\_t}{ count}}
+\func{size\_t}{Write}{\param{const void*}{ buffer}, \param{size\_t}{ count}}
 
 Writes the specified number of bytes from a buffer.
 
@@ -257,11 +330,19 @@ Writes the specified number of bytes from a buffer.
 
 \wxheading{Return value}
 
-TRUE if the operation was successful.
+the number of bytes actually written
+
 
 \membersection{wxFile::Write}\label{wxfilewrites}
 
-\func{bool}{Write}{\param{const wxString\& }{s}}
+\func{bool}{Write}{\param{const wxString\& }{s}, \param{wxMBConv\&}{ conv = wxConvUTF8}}
+
+Writes the contents of the string to the file, returns true on success.
+
+The second argument is only meaningful in Unicode build of wxWidgets when
+{\it conv} is used to convert {\it s} to multibyte representation.
 
-Writes the contents of the string to the file, returns TRUE on success.
+Note that this method only works with {\tt NUL}-terminated strings, if you want
+to write data with embedded {\tt NUL}s to the file you should use the other 
+\helpref{Write() overload}{wxfilewrite}.