X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/28c9c76e7f53a955dda4b40a0d89854230233a7b..a236aa2058ccf3d36e9cafc20fa7375080c4be50:/docs/latex/wx/txtstrm.tex?ds=sidebyside diff --git a/docs/latex/wx/txtstrm.tex b/docs/latex/wx/txtstrm.tex index 0783a8f76b..d85ea16e8d 100644 --- a/docs/latex/wx/txtstrm.tex +++ b/docs/latex/wx/txtstrm.tex @@ -4,7 +4,7 @@ \section{\class{wxTextInputStream}}\label{wxtextinputstream} This class provides functions that read text datas using an input stream. -So, you can read \it{text} floats, integers. +So, you can read {\it text} floats, integers. The wxTextInputStream correctly reads text files (or streams) in DOS, Macintosh and Unix formats and reports a single newline char as a line ending. @@ -13,9 +13,16 @@ Operator >> is overloaded and you can use this class like a standard C++ iostrea Note, however, that the arguments are the fixed size types wxUint32, wxInt32 etc and on a typical 32-bit computer, none of these match to the "long" type (wxInt32 is defined as int on 32-bit architectures) so that you cannot use long. To avoid -problems (here and elsewhere), make use of the wxInt32, wxUint32, etc types. +problems (here and elsewhere), make use of wxInt32, wxUint32 and similar types. + +If you're scanning through a file using wxTextInputStream, you should check for EOF {\bf before} +reading the next item (word / number), because otherwise the last item may get lost. +You should however be prepared to receive an empty item (empty string / zero number) at the +end of file, especially on Windows systems. This is unavoidable because most (but not all) files end +with whitespace (i.e. usually a newline). For example: + \begin{verbatim} wxFileInputStream input( "mytext.txt" ); wxTextInputStream text( input ); @@ -34,53 +41,148 @@ For example: \latexignore{\rtfignore{\wxheading{Members}}} -\membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamconstr} -\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}} +\membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamctor} + +\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}, \param{const wxString\&}{ sep=" $\backslash$t"}, + \param{const wxMBConv\&}{ conv = wxConvAuto()} } -Constructs a text stream object from an input stream. Only read methods will -be available. +Constructs a text stream associated to the given input stream. \wxheading{Parameters} -\docparam{stream}{The input stream.} +\docparam{stream}{The underlying input stream.} + +\docparam{sep}{The initial string separator characters.} + +\docparam{conv}{{\it In Unicode build only:} The encoding converter used to convert the bytes in the + underlying input stream to characters.} -\membersection{wxTextInputStream::\destruct{wxTextInputStream}} + +\membersection{wxTextInputStream::\destruct{wxTextInputStream}}\label{wxtextinputstreamdtor} \func{}{\destruct{wxTextInputStream}}{\void} Destroys the wxTextInputStream object. -\membersection{wxTextInputStream::Read8} -\func{wxUint8}{Read8}{\void} +\membersection{wxTextInputStream::Read8}\label{wxtextinputstreamread8} + +\func{wxUint8}{Read8}{\param{int}{ base = 10}} + +Reads a single unsigned byte from the stream, given in base {\it base}. + +The value of {\it base} must be comprised between $2$ and $36$, inclusive, or +be a special value $0$ which means that the usual rules of {\tt C} numbers are +applied: if the number starts with {\tt 0x} it is considered to be in base +$16$, if it starts with {\tt 0} - in base $8$ and in base $10$ otherwise. Note +that you may not want to specify the base $0$ if you are parsing the numbers +which may have leading zeroes as they can yield unexpected (to the user not +familiar with C) results. + + +\membersection{wxTextInputStream::Read8S}\label{wxtextinputstreamread8s} + +\func{wxInt8}{Read8S}{\param{int}{ base = 10}} + +Reads a single signed byte from the stream. + +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. + + +\membersection{wxTextInputStream::Read16}\label{wxtextinputstreamread16} + +\func{wxUint16}{Read16}{\param{int}{ base = 10}} -Reads a single byte from the stream. +Reads a unsigned 16 bit integer from the stream. -\membersection{wxTextInputStream::Read16} +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. -\func{wxUint16}{Read16}{\void} -Reads a 16 bit integer from the stream. +\membersection{wxTextInputStream::Read16S}\label{wxtextinputstreamread16s} -\membersection{wxTextInputStream::Read32} +\func{wxInt16}{Read16S}{\param{int}{ base = 10}} -\func{wxUint16}{Read32}{\void} +Reads a signed 16 bit integer from the stream. -Reads a 32 bit integer from the stream. +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. -\membersection{wxTextInputStream::ReadDouble} + +\membersection{wxTextInputStream::Read32}\label{wxtextinputstreamread32} + +\func{wxUint32}{Read32}{\param{int}{ base = 10}} + +Reads a 32 bit unsigned integer from the stream. + +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. + + +\membersection{wxTextInputStream::Read32S}\label{wxtextinputstreamread32s} + +\func{wxInt32}{Read32S}{\param{int}{ base = 10}} + +Reads a 32 bit signed integer from the stream. + +See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the +description of the {\it base} parameter. + + +\membersection{wxTextInputStream::GetChar}\label{wxtextinputstreamgetchar} + +\func{wxChar}{GetChar}{\void} + +Reads a character, returns $0$ if there are no more characters in the stream. + + +\membersection{wxTextInputStream::ReadDouble}\label{wxtextinputstreamreaddouble} \func{double}{ReadDouble}{\void} Reads a double (IEEE encoded) from the stream. -\membersection{wxTextInputStream::ReadString} -\func{wxString}{wxTextInputStream::ReadString}{\void} +\membersection{wxTextInputStream::ReadLine}\label{wxtextinputstreamreadline} + +\func{wxString}{ReadLine}{\void} + +Reads a line from the input stream and returns it (without the end of line +character). -Reads a line from the stream. A line is a string which ends with -$\backslash$n or $\backslash$r$\backslash$n or $\backslash$r. + +\membersection{wxTextInputStream::ReadString}\label{wxtextinputstreamreadstring} + +\func{wxString}{ReadString}{\void} + +{\bf NB:} This method is deprecated, use \helpref{ReadLine}{wxtextinputstreamreadline} +or \helpref{ReadWord}{wxtextinputstreamreadword} instead. + +Same as \helpref{ReadLine}{wxtextinputstreamreadline}. + + +\membersection{wxTextInputStream::ReadWord}\label{wxtextinputstreamreadword} + +\func{wxString}{ReadWord}{\void} + +Reads a word (a sequence of characters until the next separator) from the +input stream. + +\wxheading{See also} + +\helpref{SetStringSeparators}{wxtextinputstreamsetstringseparators} + + +\membersection{wxTextInputStream::SetStringSeparators}\label{wxtextinputstreamsetstringseparators} + +\func{void}{SetStringSeparators}{\param{const wxString\& }{sep}} + +Sets the characters which are used to define the word boundaries in +\helpref{ReadWord}{wxtextinputstreamreadword}. + +The default separators are the space and {\tt TAB} characters. % ---------------------------------------------------------------------------- % wxTextOutputStream @@ -92,6 +194,7 @@ This class provides functions that write text datas using an output stream. So, you can write {\it text} floats, integers. You can also simulate the C++ cout class: + \begin{verbatim} wxFFileOutputStream output( stderr ); wxTextOutputStream cout( output ); @@ -104,67 +207,90 @@ You can also simulate the C++ cout class: The wxTextOutputStream writes text files (or streams) on DOS, Macintosh and Unix in their native formats (concerning the line ending). +\wxheading{Include files} + + + \latexignore{\rtfignore{\wxheading{Members}}} -\membersection{wxTextOutputStream::wxTextOutputStream}\label{wxtextoutputstreamconstr} -\func{}{wxTextOutputStream}{\param{wxOutputStream\&}{ stream}, \param{wxEOL}{ mode = wxEOL_NATIVE}} +\membersection{wxTextOutputStream::wxTextOutputStream}\label{wxtextoutputstreamctor} -Constructs a text stream object from an output stream. Only write methods will -be available. +\func{}{wxTextOutputStream}{\param{wxOutputStream\&}{ stream}, \param{wxEOL}{ mode = wxEOL\_NATIVE}, \param{const wxMBConv\&}{ conv = wxConvAuto()}} + +Constructs a text stream object associated to the given output stream. \wxheading{Parameters} \docparam{stream}{The output stream.} -\docparam{mode}{The end-of-line mode. One of {\bf wxEOL_NATIVE}, {\bf wxEOL_DOS}, {\bf wxEOL_MAC} or {\bf wxEOL_UNIX}.} +\docparam{mode}{The end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.} + +\docparam{conv}{{\it In Unicode build only:} The object used to convert +Unicode text into ASCII characters written to the output stream.} -\membersection{wxTextOutputStream::\destruct{wxTextOutputStream}} + +\membersection{wxTextOutputStream::\destruct{wxTextOutputStream}}\label{wxtextoutputstreamdtor} \func{}{\destruct{wxTextOutputStream}}{\void} Destroys the wxTextOutputStream object. -\membersection{wxTextOutputStream::GetMode} -\func{wxEOL}{wxTextOutputStream::GetMode}{\void} +\membersection{wxTextOutputStream::GetMode}\label{wxtextoutputstreamgetmode} + +\func{wxEOL}{GetMode}{\void} + +Returns the end-of-line mode. One of {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}. + -Returns the end-of-line mode. One of {\bf wxEOL_DOS}, {\bf wxEOL_MAC} or {\bf wxEOL_UNIX}. +\membersection{wxTextOutputStream::PutChar}\label{wxtextoutputstreamputchar} -\membersection{wxTextOutputStream::SetMode} +\func{void}{PutChar}{{\param wxChar }{c}} -\func{void}{wxTextOutputStream::SetMode}{{\param wxEOL}{ mode = wxEOL_NATIVE}} +Writes a character to the stream. -Set the end-of-line mode. One of {\bf wxEOL_NATIVE}, {\bf wxEOL_DOS}, {\bf wxEOL_MAC} or {\bf wxEOL_UNIX}. -\membersection{wxTextOutputStream::Write8} +\membersection{wxTextOutputStream::SetMode}\label{wxtextoutputstreamsetmode} -\func{void}{wxTextOutputStream::Write8}{{\param wxUint8 }{i8}} +\func{void}{SetMode}{{\param wxEOL}{ mode = wxEOL\_NATIVE}} + +Set the end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}. + + +\membersection{wxTextOutputStream::Write8}\label{wxtextoutputstreamwrite8} + +\func{void}{Write8}{{\param wxUint8 }{i8}} Writes the single byte {\it i8} to the stream. -\membersection{wxTextOutputStream::Write16} -\func{void}{wxTextOutputStream::Write16}{{\param wxUint16 }{i16}} +\membersection{wxTextOutputStream::Write16}\label{wxtextoutputstreamwrite16} + +\func{void}{Write16}{{\param wxUint16 }{i16}} Writes the 16 bit integer {\it i16} to the stream. -\membersection{wxTextOutputStream::Write32} -\func{void}{wxTextOutputStream::Write32}{{\param wxUint32 }{i32}} +\membersection{wxTextOutputStream::Write32}\label{wxtextoutputstreamwrite32} + +\func{void}{Write32}{{\param wxUint32 }{i32}} Writes the 32 bit integer {\it i32} to the stream. -\membersection{wxTextOutputStream::WriteDouble} -\func{virtual void}{wxTextOutputStream::WriteDouble}{{\param double }{f}} +\membersection{wxTextOutputStream::WriteDouble}\label{wxtextoutputstreamwritedouble} + +\func{virtual void}{WriteDouble}{{\param double }{f}} Writes the double {\it f} to the stream using the IEEE format. -\membersection{wxTextOutputStream::WriteString} -\func{virtual void}{wxTextOutputStream::WriteString}{{\param const wxString\& }{string}} +\membersection{wxTextOutputStream::WriteString}\label{wxtextoutputstreamwritestring} + +\func{virtual void}{WriteString}{{\param const wxString\& }{string}} -Writes {\it string} as a line. Depending on the end-of-line mode, it adds -$\backslash$n, $\backslash$r or $\backslash$r$\backslash$n. +Writes {\it string} as a line. Depending on the end-of-line mode the end of +line ('$\backslash$n') characters in the string are converted to the correct +line ending terminator.