X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/1e6b2edfc836c8867cb868e73d35f36a6e68f943..d33ccbe15c60e311c2d63f5aeb1d3ff52650ac61:/wx-config.in diff --git a/wx-config.in b/wx-config.in index 811b640290..748c8856fb 100755 --- a/wx-config.in +++ b/wx-config.in @@ -45,23 +45,24 @@ usage() wx-config [--prefix[=DIR]] [--exec-prefix[=DIR]] [--release] [--version-full] [--list] [--selected-config] [--host=HOST] [--toolkit=TOOLKIT] - [--universal[=yes|no]] [--unicode[=yes|no]] [--debug[=yes|no]] - [--static[=yes|no]] [--version[=VERSION]] [--basename] - [--cc] [--cxx] [--cppflags [base]] [--cxxflags [base]] [--cflags] + [--universal[=yes|no]] [--unicode[=yes|no]] [--static[=yes|no]] + [--version[=VERSION]] [--basename] [--cc] [--cxx] + [--cppflags [base]] [--cxxflags [base]] [--cflags] [--rescomp] [--linkdeps] [--ld] [--utility=UTIL] [--libs [LIBS...]] [--optional-libs [LIBS...]] wx-config returns information about the wxWidgets libraries available on your system. It may be used to retrieve the information required to build applications using these libraries using --cppflags, --cxxflags, --cflags, - and --libs options. + and --libs options. And you may query the properties of this configuration + using --query-{host,toolkit,widgetset,chartype,version,linkage}. If multiple builds of wxWidgets are available, you can use the options - --prefix, --host, --toolkit, --unicode, --debug, --static, --universal and - --version to select from them. The --selected-config option shows the name - of the current configuration and --list shows available alternatives which - match specified criteria. The --utility option returns the correct version - of UTIL to use with the selected build. The --linkdeps option returns only + --prefix, --host, --toolkit, --unicode, --static, --universal or --version + to select from them. The --selected-config option shows the name of the + current configuration and --list shows available alternatives which match + specified criteria. The --utility option returns the correct version of + UTIL to use with the selected build. The --linkdeps option returns only static libraries for your makefile link rule dependencies. The LIBS arguments (comma or space separated) may be used to specify the @@ -72,7 +73,8 @@ usage() list below. The --optional-libs parameter should be followed by a list of libs that should be linked to, but only if they are available. - Available libraries in this build are : @BUILT_WX_LIBS@ + Available libraries in this build are: + @BUILT_WX_LIBS@ EOF @@ -112,7 +114,7 @@ EGREP="@EGREP@" # configs to this one. Options earlier in the list should be more crucial # to match well than those that follow. Options specified by the user will # always take precedence and are not subject to any partial ordering here. -wxconfig_schema="host toolkit widgetset chartype debugtype flavour version linkage" +wxconfig_schema="host toolkit widgetset chartype flavour version linkage" # Options that are expected to generate some output. wxconfig_output_options="prefix exec_prefix @@ -133,6 +135,10 @@ wxconfig_output_options="prefix exec_prefix wxconfig_input_options="prefix exec_prefix utility $wxconfig_schema" # Input options that accept only a yes or no argument. +# +# Notice that this includes "debug" but it is done only for compatibility, this +# options (i.e. --debug[=yes] or --debug=no) is completely ignored as there is +# no distinction between debug and release builds in wx any more wxconfig_yesno_options="universal unicode debug static" # Boolean options that do something or not. @@ -265,6 +271,15 @@ for arg do fi ;; + --query-*) + _name=`echo $arg | sed 's/^--query-//'` + if match_field "$_name" $wxconfig_schema + then + query_options="${query_options:+$query_options }$_name" + continue + fi + ;; + --*) _name=`option_name $arg` if validate_arg wxconfig flag "$_name" yes || @@ -277,15 +292,21 @@ for arg do *) # We validate the parameters later ... - if [ "$_name" = "cxxflags" ] || [ "$_name" = "cppflags" ]; then + if [ "$_name" = "cxxflags" ] || [ "$_name" = "cppflags" ] || [ "$_name" = "cflags" ]; then cxx_parameters="${cxx_parameters:+$cxx_parameters }$arg" elif [ "$_name" = "libs" ]; then libs_parameters="${libs_parameters:+$libs_parameters }$arg" elif [ "$_name" = "optional_libs" ]; then optional_libs_parameters="${optional_libs_parameters:+$optional_libs_parameters }$arg" else - # These are unattached args and signify an error - input_parameters="${input_parameters:+$input_parameters }$arg" + # normally anything here are unattached arguments and signify an + # error but for compatibility with the 2.8 wx-config and, + # especially, configure scripts generated using 2.8 wxwin.m4 and + # hence doing `wx-config --version base,std`, we ignore anything + # following this option, just as 2.8 version used to do + if [ "$_name" != "version" ]; then + input_parameters="${input_parameters:+$input_parameters }$arg" + fi fi continue ;; @@ -300,14 +321,7 @@ done check_yesno_option universal widgetset univ check_yesno_option unicode chartype unicode ansi -check_yesno_option debug debugtype debug release -check_yesno_option static linkage '-static' - -# Display error for unknown input parameters -if [ $input_parameters ]; then - decho "Extra unknown input parameters : $input_parameters" - exit 1 -fi +check_yesno_option static linkage static # Dump everything we just read in debug mode. if [ -n "$WXDEBUG" ]; then @@ -332,6 +346,7 @@ if [ -n "$WXDEBUG" ]; then for o in $output_options; do decho " $o = `eval echo \"\\\$output_option_$o\"`" done + decho " query options = $query_options" fi @@ -343,13 +358,13 @@ fi # -------------------------------------------------------------- # get_mask [ _hash ] -# Construct a config filename mask from a psuedo-hash of component variables. +# Construct a config filename mask from a pseudo-hash of component variables. # The optional argument is the prefix of the hash to use. If not specified # this will return a mask derived from the command line options that were used. get_mask() { [ $# -gt 0 ] || set m - eval echo "\${$1_host}\${$1_toolkit}\${$1_widgetset}-\${$1_chartype}-\${$1_debugtype}\${$1_linkage}-\${$1_version}\${$1_flavour}" + eval echo "\${$1_host:+\$$1_host-}\${$1_toolkit}\${$1_widgetset}-\${$1_chartype}\${$1_linkage:+-\$$1_linkage}-\${$1_version}\${$1_flavour}" } # Returns true if this script is for a cross compiled config. @@ -367,28 +382,27 @@ is_cross && target="@host_alias@" # Define a pseudo-hash to contain the specification of this wx-config # instance and its associated library. -this_host="${target:+${target}-}" +this_host="${target:+${target}}" this_toolkit="@TOOLKIT_DIR@@TOOLKIT_VERSION@" this_widgetset="@WIDGET_SET@" this_chartype="@WX_CHARTYPE@" -this_debugtype="@WX_DEBUGTYPE@" this_flavour="@WX_FLAVOUR@" this_version="@WX_RELEASE@" -this_linkage=`[ "x@SHARED@" = "x1" ] || echo '-static'` +this_linkage=`[ "x@SHARED@" = "x1" ] || echo 'static'` this_config=`get_mask this` + # Extract the user specification from the options parsed. m_host=${input_option_host:+"${input_option_host}-?"} -m_host=${m_host:-${input_option_host-$this_host}} +m_host=${m_host:-$this_host} m_toolkit=${input_option_toolkit:-'[^-]+'} m_widgetset=${input_option_widgetset-'(univ)?'} m_chartype=${input_option_chartype:-'(unicode|ansi)'} -m_debugtype=${input_option_debugtype:-'(debug|release)'} m_flavour=${input_option_flavour:+-$input_option_flavour} m_flavour=${m_flavour:-${input_option_flavour-'(-[^-]+)?'}} m_version=${input_option_version:-'[0-9]+\.[0-9]+'} -m_linkage=${input_option_linkage-'(-static)?'} +m_linkage=${input_option_linkage-'?(static)?'} configmask="^`get_mask`$" @@ -405,7 +419,6 @@ if [ -n "$WXDEBUG" ]; then decho " m_toolkit = '$m_toolkit'" decho " m_widgetset = '$m_widgetset'" decho " m_chartype = '$m_chartype'" - decho " m_debugtype = '$m_debugtype'" decho " m_flavour = '$m_flavour'" decho " m_version = '$m_version'" decho " m_linkage = '$m_linkage'" @@ -591,8 +604,7 @@ get_legacy_mask() { [ $# -gt 0 ] || set m eval [ "x\${$1_chartype}" != "xunicode" ] || _unicode_flag=u - eval [ "x\${$1_debugtype}" != "xdebug" ] || _debug_flag=d - eval echo "wx\${$1_toolkit}${_unicode_flag}${_debug_flag}-\${$1_version}\${$1_host}-config" + eval echo "wx\${$1_toolkit}${_unicode_flag}-\${$1_version}\${$1_host}-config" } # find_legacy_configs @@ -799,7 +811,8 @@ if not user_mask_fits "$this_config" ; then decho "--> $prefix/bin/$_last_chance $_legacy_args" fi - export WXCONFIG_DELEGATED=yes + WXCONFIG_DELEGATED=yes + export WXCONFIG_DELEGATED $prefix/bin/$_last_chance $_legacy_args exit @@ -838,7 +851,8 @@ EOF decho "--> $wxconfdir/$best_delegate $*" fi - export WXCONFIG_DELEGATED=yes + WXCONFIG_DELEGATED=yes + export WXCONFIG_DELEGATED $wxconfdir/$best_delegate $* exit fi @@ -860,7 +874,8 @@ EOF decho "--> $wxconfdir/`find_eligible_delegates $configmask` $*" fi - export WXCONFIG_DELEGATED=yes + WXCONFIG_DELEGATED=yes + export WXCONFIG_DELEGATED $wxconfdir/`find_eligible_delegates $configmask` $* exit fi @@ -896,6 +911,9 @@ bindir="@bindir@" [ -z "$output_option_ld" ] || echo "@CXX@ -o" [ -z "$flag_option_selected_config" ] || echo "$this_config" +for q in $query_options; do + eval echo "\$this_$q" +done # --rezflags is deprecated and disabled (2005/11/29) if [ -n "$output_option_rezflags" ]; then @@ -1185,7 +1203,7 @@ fi if is_installed; then _include_cppflags="-I${includedir}/wx-@WX_RELEASE@@WX_FLAVOUR@" else - _include_cppflags="-I${includedir} -I${prefix}/contrib/include" + _include_cppflags="-I${includedir}" fi _cppflags=`echo "-I${libdir}/wx/include/@TOOLCHAIN_FULLNAME@" $_include_cppflags "@WXCONFIG_CPPFLAGS@" $_gui_cppflags` @@ -1262,7 +1280,6 @@ if [ -n "$output_option_rescomp" ]; then "@WXCONFIG_RESFLAGS@" else echo "@RESCOMP@ --include-dir ${includedir}" \ - "--include-dir ${prefix}/contrib/include" \ "@WXCONFIG_RESFLAGS@" fi ;;