X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/1d341cf4f7d1a2d4d5687d2fb6069c6b89dabedc..72858fcf67bf670ea18fe48a6b039d61afa87131:/BuildCVS.txt diff --git a/BuildCVS.txt b/BuildCVS.txt index 5fe2d69624..b7ddba7b44 100644 --- a/BuildCVS.txt +++ b/BuildCVS.txt @@ -19,30 +19,33 @@ varaibles and PATH entries. Continue with item c) below. -b) If using the GNU Mingw32 or GNU Cygwin32 compilers +b) If using the MinGW or Cygwin compilers -You can get Mingw32 from http://www.mingw.org +You can get MinGW from http://www.mingw.org/ -Cygwin32 is available at http://www.cygwin.com +Cygwin is available at http://sources.redhat.com/cygwin/ -The makefile might have small problems with Cygwin's tools -so it is recommended to use Mingw32 and its toolchain instead -if possible. +If you are using Cygwin or MinGW together with the MSYS environment, you +can build the library using configure (see "Unix ports" and +"Windows using configure" below). You can also +build wxWindows without configure using native makefile, but only with +MinGW. Using Cygwin together with Windows makefile is no longer supported. + +If building with Mingw without configure: -> Set your path so that it includes the directory where your compiler and tools reside --> If your are using an old Mingw32 version (gcc-2.95 or older), - you might need to fix some headers with the patches contained - in the wxWin\Mingw32-gcc295.patches file. PLEASE APPLY THESE - PATCHES BY HAND! There are apparently a few different versions - of the headers floating around. Note that these patches are - not needed if you are using Mingw32 gcc-2.95.2 or newer. - --> Edit wx/src/makeg95.env and set the MINGW32 variable at the top of - the file to either 1 (you have Mingw32) or 0 (you have Cygwin32). - If using MINGW32, also set the MINGW32VERSION variable - appropiately. +-> Make sure you have GNU Make installed. It must be Windows native version. + Download it from http://www.mingw.org, the executable will be called + mingw32-make.exe. + +-> Modern version of MinGW is required; preferably MinGW 2.0 (with gcc3), + but MinGW with gcc-2.95.3 will suffice. If you are using 2.95, you will + have to change variable GCC_VERSION in config.gcc (see msw/install.txt + for details). + +If using configure, Unix instructions apply. c) Build instructions @@ -51,26 +54,29 @@ c) Build instructions into c:\wxWin -> Copy c:\wxWin\include\wx\msw\setup0.h to c:\wxWin\include\wx\msw\setup.h --> Edit c:\wxWin\include\wx\msw\setup.h so that - most features are enabled (i.e. defined to 1), for example: - #define wxUSE_ODBC 0 - #define wxUSE_SOCKETS 1 - #define wxUSE_HTML 1 - #define wxUSE_THREADS 1 - #define wxUSE_FS_INET 0 - #define wxUSE_FS_ZIP 1 - #define wxUSE_BUSYINFO 1 - #define wxUSE_DYNLIB_CLASS 1 - #define wxUSE_ZIPSTREAM 1 - #define wxUSE_LIBJPEG 1 - #define wxUSE_LIBPNG 1 +-> Edit c:\wxWin\include\wx\msw\setup.h to choose + the features you would like to compile wxWindows with[out]. and std iostreams are disabled with #define wxUSE_STD_IOSTREAM 0 --> type: cd c:\wxWin\src\msw --> type: make -f makefile.g95 (if using GNU tools) +-> type: cd c:\wxWin\build\win32 +-> type: make -f makefile.gcc (if using GNU tools) or type: nmake -f makefile.vc (if using MS VC++) +etc. + + See also docs/msw/install.txt for additional compilation options. + +d) Borland (including free command line tools) + Download tools from http://www.borland.com/downloads/ + + See docs/msw/install.txt for details; in brief + +-> type cd %WXWIN%\build\win32 +-> type make -f makefile.bcc + +You can customize many things in the build process, detailed description is +in docs/msw/install.txt. II) Unix ports @@ -82,10 +88,11 @@ that works without libtool and automake, using only configure to create what is needed. In order to create configure, you need to have the -GNU autoconf package (version 2.13 or 2.14) installed +GNU autoconf package (version > 2.54) installed on your system and type run "autoconf" in the base directory (or run the autogen.sh script in the same -directory, which just calls autoconf). +directory, which just calls autoconf). Note that you usually don't +need to do this because configure is included in cVS. Set WXWIN environment variable to the base directory such as ~/wxWindows (this is actually not really needed). @@ -109,11 +116,10 @@ yet complete). III) Windows using configure ---------------------------------------- -Take a look at Unix->Windows cross compiling. With minor -modifications, this should work in Windows if you've got the cygnus -utilities (bash, GNU make, etc) and either mingw32 or cygwin32 installed. -See http://www.cygnus.com for these programs, or go straight to their -ftp server at ftp://sourceware.cygnus.com/pub/cygwin/. +wxWindows can be built on Windows using MSYS (see +http://www.mingw.org/), which is a POSIX build environment +for Windows. With MSYS you can just ./configure && make (see also VII, +Unix->Windows cross-compiling using configure). Of course, you can also build the library using plain makefiles (see section I). @@ -125,11 +131,15 @@ Refer to the readme.txt and install.txt files in docs/mac to build wxWindows under Classic Mac OS using CodeWarrior. If you are checking out the CVS sources using cvs under Mac OS X and -compiling under Classic Mac OS, make sure that all text files have a -Mac OS type of 'TEXT' otherwise CodeWarrior may ignore them. Checking -out the CVS sources using cvs under Mac OS X creates untyped files -which can lead to compialtion errors under CodeWarrior which are hard -to track down. +compiling under Classic Mac OS: + +- make sure that all text files have a Mac OS type of 'TEXT' otherwise + CodeWarrior may ignore them. Checking out the CVS sources using cvs + under Mac OS X creates untyped files which can lead to compilation + errors under CodeWarrior which are hard to track down. + +- convert the xml files to CodeWarrior binary projects using the supplied + AppleScript in docs/mac (M5xml2mcp.applescript for CodeWarrior 5.3) V) MacOS X using configure and the Developer Tools ---------------------------------------- @@ -139,7 +149,7 @@ you will need to register at the Apple Developer web site (this is a free registration) in order to download the Developer Tools installer. In order to create configure, you need to have the -GNU autoconf package (version 2.13 or 2.14) installed +GNU autoconf package (version >= 2.54) installed on your system and type run "autoconf" in the base directory (or run the autogen.sh script in the same directory, which just calls autoconf). @@ -156,17 +166,17 @@ VI) OS/2 VII) Unix->Windows cross-compiling using configure -------------------------------------------------- -First you'll need a cross-compiler; linux glibc binaries of mingw32 and -cygwin32 (both based on egcs) can be found at +First you'll need a cross-compiler; linux glibc binaries of MinGW and +Cygwin (both based on egcs) can be found at ftp://ftp.objsw.com/pub/crossgcc/linux-x-win32. Alternative binaries, based on the latest MinGW release can be found at -http://members.telering.at/jessich/mingw/mingwcross/mingw_cross.html +http://members.telering.at/jessich/mingw/mingwcross/mingw_cross.html Otherwise you can compile one yourself. -[ A Note about cygwin32 and mingw32: the main difference is that cygwin32 +[ A Note about Cygwin and MinGW: the main difference is that Cygwin binaries are always linked against cygwin.dll. This dll encapsulates most standard Unix C extensions, which is very handy if you're porting unix -software to windows. However, wxMSW doesn't need this, so mingw32 is +software to windows. However, wxMSW doesn't need this, so MinGW is preferable if you write portable C(++). ] You might want to build both Unix and Windows binaries in the same source @@ -191,7 +201,7 @@ yourself: DLLTOOL=i586-mingw32-dlltool LD=i586-mingw32-ld NM=i586-mingw32-nm \ ../configure --host=i586-mingw32 --with-mingw -(all assuming you're using mingw32) +(all assuming you're using MinGW) By default this will compile a DLL, if you want a static library, specify --disable-shared. @@ -203,7 +213,7 @@ will be a compile error :-) NB: if you are using a very old compiler you risk to get quite a few warnings about "ANSI C++ forbids implicit conversion from 'void *'" in all places where va_arg macro is used. This is due to a bug in (some versions of) - mingw32 headers which may be corrected by upgrading your compier, + MinGW headers which may be corrected by upgrading your compier, otherwise you might edit the file ${install_prefix}/lib/gcc-lib/i586-mingw32/egcs-2.91.57/include/stdarg.h @@ -226,7 +236,7 @@ typedef void *__gnuc_va_list; __gnuc_va_list is char *. If this is successful, you end up with a wx23_2.dll/libwx23_2.a in win32/lib -( or just libwx_msw.a if you opted for a static build ). +(or just libwx_msw.a if you opted for a static build). Now try building the minimal sample: -> cd samples/minimal