X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/1c405bb51093fc7812fb66e7d47faac5707e02b5..867a54b6daafc24de2d848724e4e3387bdaadd1b:/configure diff --git a/configure b/configure index ff903f0f18..5271276cff 100755 --- a/configure +++ b/configure @@ -3,8 +3,18 @@ # From configure.in Id: configure.in +# aclocal.m4 generated automatically by aclocal 1.6 -*- Autoconf -*- +# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. @@ -45,7 +55,8 @@ - +# Configure paths for GTK+ +# Owen Taylor 1997-2001 @@ -85,6 +96,10 @@ ac_help="$ac_help --with-mgl use SciTech MGL" ac_help="$ac_help --with-microwin use MicroWindows" +ac_help="$ac_help + --with-x11 use X11" +ac_help="$ac_help + --enable-nanox use NanoX" ac_help="$ac_help --enable-gtk2 use GTK+ 2.0 if available (EXPERIMENTAL)" ac_help="$ac_help @@ -93,8 +108,6 @@ ac_help="$ac_help --with-libjpeg use libjpeg (JPEG file format)" ac_help="$ac_help --with-libtiff use libtiff (TIFF file format)" -ac_help="$ac_help - --with-freetype use freetype (font rasterizer)" ac_help="$ac_help --with-opengl use OpenGL (or Mesa)" ac_help="$ac_help @@ -138,7 +151,7 @@ ac_help="$ac_help ac_help="$ac_help --enable-compat20 enable wxWindows 2.0 compatibility" ac_help="$ac_help - --enable-compat22 enable wxWindows 2.2 compatibility" + --disable-compat22 disable wxWindows 2.2 compatibility" ac_help="$ac_help --enable-intl use internationalization system" ac_help="$ac_help @@ -412,11 +425,7 @@ ac_help="$ac_help ac_help="$ac_help --enable-icocur use Windows ICO and CUR formats" ac_help="$ac_help - --with-gtk-prefix=PFX Prefix where GTK is installed (optional)" -ac_help="$ac_help - --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)" -ac_help="$ac_help - --disable-gtktest Do not try to compile and run a test GTK program" + --disable-gtktest do not try to compile and run a test GTK+ program" ac_help="$ac_help --with-gtk-prefix=PFX Prefix where GTK is installed (optional)" ac_help="$ac_help @@ -991,7 +1000,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:995: checking host system type" >&5 +echo "configure:1004: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1012,7 +1021,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1016: checking target system type" >&5 +echo "configure:1025: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1030,7 +1039,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1034: checking build system type" >&5 +echo "configure:1043: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1099,7 +1108,7 @@ NEEDS_D_REENTRANT_FOR_R_FUNCS=0 CPP_MT_FLAG=-D_REENTRANT -ALL_TOOLKITS="GTK MAC MGL MICROWIN MOTIF MSW PM WINE" +ALL_TOOLKITS="GTK MAC MGL MICROWIN MOTIF MSW PM WINE X11" DEFAULT_wxUSE_GTK=0 DEFAULT_wxUSE_MAC=0 @@ -1109,6 +1118,7 @@ DEFAULT_wxUSE_MOTIF=0 DEFAULT_wxUSE_MSW=0 DEFAULT_wxUSE_PM=0 DEFAULT_wxUSE_WINE=0 +DEFAULT_wxUSE_X11=0 DEFAULT_DEFAULT_wxUSE_GTK=0 DEFAULT_DEFAULT_wxUSE_MAC=0 @@ -1118,6 +1128,7 @@ DEFAULT_DEFAULT_wxUSE_MOTIF=0 DEFAULT_DEFAULT_wxUSE_MSW=0 DEFAULT_DEFAULT_wxUSE_PM=0 DEFAULT_DEFAULT_wxUSE_WINE=0 +DEFAULT_DEFAULT_wxUSE_X11=0 PROGRAM_EXT= SO_SUFFIX=so @@ -1340,7 +1351,6 @@ EOF PROGRAM_EXT=".exe" DEFAULT_DEFAULT_wxUSE_MGL=1 - DEFAULT_DEFAULT_wxUSE_SHARED=0 ;; *-pc-os2_emx | *-pc-os2-emx ) @@ -1350,6 +1360,7 @@ EOF PROGRAM_EXT=".exe" DEFAULT_DEFAULT_wxUSE_PM=1 + LIBS="$LIBS -lstdcpp" ;; powerpc-*-darwin* ) @@ -1394,13 +1405,13 @@ fi if test "$USE_LINUX" = 1; then echo $ac_n "checking for glibc 2.1 or later""... $ac_c" 1>&6 -echo "configure:1398: checking for glibc 2.1 or later" >&5 +echo "configure:1409: checking for glibc 2.1 or later" >&5 if eval "test \"`echo '$''{'wx_lib_glibc21'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -1411,7 +1422,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:1415: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1426: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_lib_glibc21=yes @@ -1452,6 +1463,8 @@ DEBUG_CONFIGURE=0 if test $DEBUG_CONFIGURE = 1; then DEFAULT_wxUSE_UNIVERSAL=no + DEFAULT_wxUSE_NANOX=no + DEFAULT_wxUSE_THREADS=yes DEFAULT_wxUSE_SHARED=yes @@ -1485,7 +1498,6 @@ if test $DEBUG_CONFIGURE = 1; then DEFAULT_wxUSE_LIBJPEG=no DEFAULT_wxUSE_LIBTIFF=no DEFAULT_wxUSE_ODBC=no - DEFAULT_wxUSE_FREETYPE=no DEFAULT_wxUSE_OPENGL=no DEFAULT_wxUSE_ON_FATAL_EXCEPTION=no @@ -1625,6 +1637,8 @@ if test $DEBUG_CONFIGURE = 1; then else DEFAULT_wxUSE_UNIVERSAL=no + DEFAULT_wxUSE_NANOX=no + DEFAULT_wxUSE_THREADS=yes DEFAULT_wxUSE_SHARED=yes @@ -1657,7 +1671,6 @@ else DEFAULT_wxUSE_LIBJPEG=yes DEFAULT_wxUSE_LIBTIFF=yes DEFAULT_wxUSE_ODBC=no - DEFAULT_wxUSE_FREETYPE=no DEFAULT_wxUSE_OPENGL=no DEFAULT_wxUSE_ON_FATAL_EXCEPTION=yes @@ -1681,7 +1694,7 @@ else DEFAULT_wxUSE_DIALUP_MANAGER=yes DEFAULT_wxUSE_JOYSTICK=yes DEFAULT_wxUSE_DYNLIB_CLASS=yes - DEFAULT_wxUSE_DYNAMIC_LOADER=no + DEFAULT_wxUSE_DYNAMIC_LOADER=yes DEFAULT_wxUSE_LONGLONG=yes DEFAULT_wxUSE_GEOMETRY=yes @@ -1810,7 +1823,7 @@ done echo $ac_n "checking for --enable-gui""... $ac_c" 1>&6 -echo "configure:1814: checking for --enable-gui" >&5 +echo "configure:1827: checking for --enable-gui" >&5 no_cache=0 # Check whether --enable-gui or --disable-gui was given. if test "${enable_gui+set}" = set; then @@ -1852,7 +1865,7 @@ if test "$wxUSE_GUI" = "yes"; then echo $ac_n "checking for --enable-universal""... $ac_c" 1>&6 -echo "configure:1856: checking for --enable-universal" >&5 +echo "configure:1869: checking for --enable-universal" >&5 no_cache=0 # Check whether --enable-universal or --disable-universal was given. if test "${enable_universal+set}" = set; then @@ -1937,19 +1950,64 @@ if test "${with_microwin+set}" = set; then wxUSE_MICROWIN="$withval" CACHE_MICROWIN=1 TOOLKIT_GIVEN=1 fi +# Check whether --with-x11 or --without-x11 was given. +if test "${with_x11+set}" = set; then + withval="$with_x11" + wxUSE_X11="$withval" wxUSE_UNIVERSAL="yes" CACHE_X11=1 TOOLKIT_GIVEN=1 +fi + + + echo $ac_n "checking for --enable-nanox""... $ac_c" 1>&6 +echo "configure:1962: checking for --enable-nanox" >&5 + no_cache=0 + # Check whether --enable-nanox or --disable-nanox was given. +if test "${enable_nanox+set}" = set; then + enableval="$enable_nanox" + + if test "$enableval" = yes; then + ac_cv_use_nanox='wxUSE_NANOX=yes' + else + ac_cv_use_nanox='wxUSE_NANOX=no' + fi + +else + + LINE=`grep "wxUSE_NANOX" ${wx_arg_cache_file}` + if test "x$LINE" != x ; then + eval "DEFAULT_$LINE" + else + no_cache=1 + fi + + ac_cv_use_nanox='wxUSE_NANOX='$DEFAULT_wxUSE_NANOX + +fi + + + eval "$ac_cv_use_nanox" + if test "$no_cache" != 1; then + echo $ac_cv_use_nanox >> ${wx_arg_cache_file}.tmp + fi + + if test "$wxUSE_NANOX" = yes; then + echo "$ac_t""yes" 1>&6 + else + echo "$ac_t""no" 1>&6 + fi + # Check whether --enable-gtk2 or --disable-gtk2 was given. if test "${enable_gtk2+set}" = set; then enableval="$enable_gtk2" - wxUSE_GTK2=1 + wxUSE_GTK2="yes" else - wxUSE_GTK2=0 + wxUSE_GTK2="no" fi echo $ac_n "checking for --with-libpng""... $ac_c" 1>&6 -echo "configure:1953: checking for --with-libpng" >&5 +echo "configure:2011: checking for --with-libpng" >&5 no_cache=0 # Check whether --with-libpng or --without-libpng was given. if test "${with_libpng+set}" = set; then @@ -2000,7 +2058,7 @@ fi echo $ac_n "checking for --with-libjpeg""... $ac_c" 1>&6 -echo "configure:2004: checking for --with-libjpeg" >&5 +echo "configure:2062: checking for --with-libjpeg" >&5 no_cache=0 # Check whether --with-libjpeg or --without-libjpeg was given. if test "${with_libjpeg+set}" = set; then @@ -2051,7 +2109,7 @@ fi echo $ac_n "checking for --with-libtiff""... $ac_c" 1>&6 -echo "configure:2055: checking for --with-libtiff" >&5 +echo "configure:2113: checking for --with-libtiff" >&5 no_cache=0 # Check whether --with-libtiff or --without-libtiff was given. if test "${with_libtiff+set}" = set; then @@ -2101,59 +2159,8 @@ fi fi - echo $ac_n "checking for --with-freetype""... $ac_c" 1>&6 -echo "configure:2106: checking for --with-freetype" >&5 - no_cache=0 - # Check whether --with-freetype or --without-freetype was given. -if test "${with_freetype+set}" = set; then - withval="$with_freetype" - - if test "$withval" = yes; then - ac_cv_use_freetype='wxUSE_FREETYPE=yes' - elif test "$withval" = no; then - ac_cv_use_freetype='wxUSE_FREETYPE=no' - elif test "$withval" = sys; then - ac_cv_use_freetype='wxUSE_FREETYPE=sys' - elif test "$withval" = builtin; then - ac_cv_use_freetype='wxUSE_FREETYPE=builtin' - else - { echo "configure: error: Invalid value for --with-freetype: should be yes, no, sys, or builtin" 1>&2; exit 1; } - fi - -else - - LINE=`grep "wxUSE_FREETYPE" ${wx_arg_cache_file}` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - else - no_cache=1 - fi - - ac_cv_use_freetype='wxUSE_FREETYPE='$DEFAULT_wxUSE_FREETYPE - -fi - - - eval "$ac_cv_use_freetype" - if test "$no_cache" != 1; then - echo $ac_cv_use_freetype >> ${wx_arg_cache_file}.tmp - fi - - if test "$wxUSE_FREETYPE" = yes; then - echo "$ac_t""yes" 1>&6 - elif test "$wxUSE_FREETYPE" = no; then - echo "$ac_t""no" 1>&6 - elif test "$wxUSE_FREETYPE" = sys; then - echo "$ac_t""system version" 1>&6 - elif test "$wxUSE_FREETYPE" = builtin; then - echo "$ac_t""builtin version" 1>&6 - else - { echo "configure: error: Invalid value for --with-freetype: should be yes, no, sys, or builtin" 1>&2; exit 1; } - fi - - echo $ac_n "checking for --with-opengl""... $ac_c" 1>&6 -echo "configure:2157: checking for --with-opengl" >&5 +echo "configure:2164: checking for --with-opengl" >&5 no_cache=0 # Check whether --with-opengl or --without-opengl was given. if test "${with_opengl+set}" = set; then @@ -2195,7 +2202,7 @@ fi echo $ac_n "checking for --with-dmalloc""... $ac_c" 1>&6 -echo "configure:2199: checking for --with-dmalloc" >&5 +echo "configure:2206: checking for --with-dmalloc" >&5 no_cache=0 # Check whether --with-dmalloc or --without-dmalloc was given. if test "${with_dmalloc+set}" = set; then @@ -2234,7 +2241,7 @@ fi echo $ac_n "checking for --with-regex""... $ac_c" 1>&6 -echo "configure:2238: checking for --with-regex" >&5 +echo "configure:2245: checking for --with-regex" >&5 no_cache=0 # Check whether --with-regex or --without-regex was given. if test "${with_regex+set}" = set; then @@ -2285,7 +2292,7 @@ fi echo $ac_n "checking for --with-zlib""... $ac_c" 1>&6 -echo "configure:2289: checking for --with-zlib" >&5 +echo "configure:2296: checking for --with-zlib" >&5 no_cache=0 # Check whether --with-zlib or --without-zlib was given. if test "${with_zlib+set}" = set; then @@ -2336,7 +2343,7 @@ fi echo $ac_n "checking for --with-odbc""... $ac_c" 1>&6 -echo "configure:2340: checking for --with-odbc" >&5 +echo "configure:2347: checking for --with-odbc" >&5 no_cache=0 # Check whether --with-odbc or --without-odbc was given. if test "${with_odbc+set}" = set; then @@ -2377,7 +2384,7 @@ fi echo $ac_n "checking for --enable-shared""... $ac_c" 1>&6 -echo "configure:2381: checking for --enable-shared" >&5 +echo "configure:2388: checking for --enable-shared" >&5 no_cache=0 # Check whether --enable-shared or --disable-shared was given. if test "${enable_shared+set}" = set; then @@ -2416,7 +2423,7 @@ fi echo $ac_n "checking for --enable-soname""... $ac_c" 1>&6 -echo "configure:2420: checking for --enable-soname" >&5 +echo "configure:2427: checking for --enable-soname" >&5 no_cache=0 # Check whether --enable-soname or --disable-soname was given. if test "${enable_soname+set}" = set; then @@ -2455,7 +2462,7 @@ fi echo $ac_n "checking for --enable-optimise""... $ac_c" 1>&6 -echo "configure:2459: checking for --enable-optimise" >&5 +echo "configure:2466: checking for --enable-optimise" >&5 no_cache=0 # Check whether --enable-optimise or --disable-optimise was given. if test "${enable_optimise+set}" = set; then @@ -2494,7 +2501,7 @@ fi echo $ac_n "checking for --enable-debug""... $ac_c" 1>&6 -echo "configure:2498: checking for --enable-debug" >&5 +echo "configure:2505: checking for --enable-debug" >&5 no_cache=0 # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then @@ -2534,7 +2541,7 @@ fi echo $ac_n "checking for --enable-precomp""... $ac_c" 1>&6 -echo "configure:2538: checking for --enable-precomp" >&5 +echo "configure:2545: checking for --enable-precomp" >&5 no_cache=0 # Check whether --enable-precomp or --disable-precomp was given. if test "${enable_precomp+set}" = set; then @@ -2582,7 +2589,7 @@ fi echo $ac_n "checking for --enable-debug_flag""... $ac_c" 1>&6 -echo "configure:2586: checking for --enable-debug_flag" >&5 +echo "configure:2593: checking for --enable-debug_flag" >&5 no_cache=0 # Check whether --enable-debug_flag or --disable-debug_flag was given. if test "${enable_debug_flag+set}" = set; then @@ -2621,7 +2628,7 @@ fi echo $ac_n "checking for --enable-debug_info""... $ac_c" 1>&6 -echo "configure:2625: checking for --enable-debug_info" >&5 +echo "configure:2632: checking for --enable-debug_info" >&5 no_cache=0 # Check whether --enable-debug_info or --disable-debug_info was given. if test "${enable_debug_info+set}" = set; then @@ -2660,7 +2667,7 @@ fi echo $ac_n "checking for --enable-debug_gdb""... $ac_c" 1>&6 -echo "configure:2664: checking for --enable-debug_gdb" >&5 +echo "configure:2671: checking for --enable-debug_gdb" >&5 no_cache=0 # Check whether --enable-debug_gdb or --disable-debug_gdb was given. if test "${enable_debug_gdb+set}" = set; then @@ -2699,7 +2706,7 @@ fi echo $ac_n "checking for --enable-debug_cntxt""... $ac_c" 1>&6 -echo "configure:2703: checking for --enable-debug_cntxt" >&5 +echo "configure:2710: checking for --enable-debug_cntxt" >&5 no_cache=0 # Check whether --enable-debug_cntxt or --disable-debug_cntxt was given. if test "${enable_debug_cntxt+set}" = set; then @@ -2738,7 +2745,7 @@ fi echo $ac_n "checking for --enable-mem_tracing""... $ac_c" 1>&6 -echo "configure:2742: checking for --enable-mem_tracing" >&5 +echo "configure:2749: checking for --enable-mem_tracing" >&5 no_cache=0 # Check whether --enable-mem_tracing or --disable-mem_tracing was given. if test "${enable_mem_tracing+set}" = set; then @@ -2777,7 +2784,7 @@ fi echo $ac_n "checking for --enable-profile""... $ac_c" 1>&6 -echo "configure:2781: checking for --enable-profile" >&5 +echo "configure:2788: checking for --enable-profile" >&5 no_cache=0 # Check whether --enable-profile or --disable-profile was given. if test "${enable_profile+set}" = set; then @@ -2816,7 +2823,7 @@ fi echo $ac_n "checking for --enable-no_rtti""... $ac_c" 1>&6 -echo "configure:2820: checking for --enable-no_rtti" >&5 +echo "configure:2827: checking for --enable-no_rtti" >&5 no_cache=0 # Check whether --enable-no_rtti or --disable-no_rtti was given. if test "${enable_no_rtti+set}" = set; then @@ -2855,7 +2862,7 @@ fi echo $ac_n "checking for --enable-no_exceptions""... $ac_c" 1>&6 -echo "configure:2859: checking for --enable-no_exceptions" >&5 +echo "configure:2866: checking for --enable-no_exceptions" >&5 no_cache=0 # Check whether --enable-no_exceptions or --disable-no_exceptions was given. if test "${enable_no_exceptions+set}" = set; then @@ -2894,7 +2901,7 @@ fi echo $ac_n "checking for --enable-permissive""... $ac_c" 1>&6 -echo "configure:2898: checking for --enable-permissive" >&5 +echo "configure:2905: checking for --enable-permissive" >&5 no_cache=0 # Check whether --enable-permissive or --disable-permissive was given. if test "${enable_permissive+set}" = set; then @@ -2933,7 +2940,7 @@ fi echo $ac_n "checking for --enable-no_deps""... $ac_c" 1>&6 -echo "configure:2937: checking for --enable-no_deps" >&5 +echo "configure:2944: checking for --enable-no_deps" >&5 no_cache=0 # Check whether --enable-no_deps or --disable-no_deps was given. if test "${enable_no_deps+set}" = set; then @@ -2973,7 +2980,7 @@ fi echo $ac_n "checking for --enable-compat20""... $ac_c" 1>&6 -echo "configure:2977: checking for --enable-compat20" >&5 +echo "configure:2984: checking for --enable-compat20" >&5 no_cache=0 # Check whether --enable-compat20 or --disable-compat20 was given. if test "${enable_compat20+set}" = set; then @@ -3012,7 +3019,7 @@ fi echo $ac_n "checking for --enable-compat22""... $ac_c" 1>&6 -echo "configure:3016: checking for --enable-compat22" >&5 +echo "configure:3023: checking for --enable-compat22" >&5 no_cache=0 # Check whether --enable-compat22 or --disable-compat22 was given. if test "${enable_compat22+set}" = set; then @@ -3053,7 +3060,7 @@ fi echo $ac_n "checking for --enable-intl""... $ac_c" 1>&6 -echo "configure:3057: checking for --enable-intl" >&5 +echo "configure:3064: checking for --enable-intl" >&5 no_cache=0 # Check whether --enable-intl or --disable-intl was given. if test "${enable_intl+set}" = set; then @@ -3092,7 +3099,7 @@ fi echo $ac_n "checking for --enable-config""... $ac_c" 1>&6 -echo "configure:3096: checking for --enable-config" >&5 +echo "configure:3103: checking for --enable-config" >&5 no_cache=0 # Check whether --enable-config or --disable-config was given. if test "${enable_config+set}" = set; then @@ -3132,7 +3139,7 @@ fi echo $ac_n "checking for --enable-protocols""... $ac_c" 1>&6 -echo "configure:3136: checking for --enable-protocols" >&5 +echo "configure:3143: checking for --enable-protocols" >&5 no_cache=0 # Check whether --enable-protocols or --disable-protocols was given. if test "${enable_protocols+set}" = set; then @@ -3171,7 +3178,7 @@ fi echo $ac_n "checking for --enable-ftp""... $ac_c" 1>&6 -echo "configure:3175: checking for --enable-ftp" >&5 +echo "configure:3182: checking for --enable-ftp" >&5 no_cache=0 # Check whether --enable-ftp or --disable-ftp was given. if test "${enable_ftp+set}" = set; then @@ -3210,7 +3217,7 @@ fi echo $ac_n "checking for --enable-http""... $ac_c" 1>&6 -echo "configure:3214: checking for --enable-http" >&5 +echo "configure:3221: checking for --enable-http" >&5 no_cache=0 # Check whether --enable-http or --disable-http was given. if test "${enable_http+set}" = set; then @@ -3249,7 +3256,7 @@ fi echo $ac_n "checking for --enable-fileproto""... $ac_c" 1>&6 -echo "configure:3253: checking for --enable-fileproto" >&5 +echo "configure:3260: checking for --enable-fileproto" >&5 no_cache=0 # Check whether --enable-fileproto or --disable-fileproto was given. if test "${enable_fileproto+set}" = set; then @@ -3288,7 +3295,7 @@ fi echo $ac_n "checking for --enable-sockets""... $ac_c" 1>&6 -echo "configure:3292: checking for --enable-sockets" >&5 +echo "configure:3299: checking for --enable-sockets" >&5 no_cache=0 # Check whether --enable-sockets or --disable-sockets was given. if test "${enable_sockets+set}" = set; then @@ -3328,7 +3335,7 @@ fi echo $ac_n "checking for --enable-ipc""... $ac_c" 1>&6 -echo "configure:3332: checking for --enable-ipc" >&5 +echo "configure:3339: checking for --enable-ipc" >&5 no_cache=0 # Check whether --enable-ipc or --disable-ipc was given. if test "${enable_ipc+set}" = set; then @@ -3368,7 +3375,7 @@ fi echo $ac_n "checking for --enable-cmdline""... $ac_c" 1>&6 -echo "configure:3372: checking for --enable-cmdline" >&5 +echo "configure:3379: checking for --enable-cmdline" >&5 no_cache=0 # Check whether --enable-cmdline or --disable-cmdline was given. if test "${enable_cmdline+set}" = set; then @@ -3407,7 +3414,7 @@ fi echo $ac_n "checking for --enable-datetime""... $ac_c" 1>&6 -echo "configure:3411: checking for --enable-datetime" >&5 +echo "configure:3418: checking for --enable-datetime" >&5 no_cache=0 # Check whether --enable-datetime or --disable-datetime was given. if test "${enable_datetime+set}" = set; then @@ -3446,7 +3453,7 @@ fi echo $ac_n "checking for --enable-timedate""... $ac_c" 1>&6 -echo "configure:3450: checking for --enable-timedate" >&5 +echo "configure:3457: checking for --enable-timedate" >&5 no_cache=0 # Check whether --enable-timedate or --disable-timedate was given. if test "${enable_timedate+set}" = set; then @@ -3485,7 +3492,7 @@ fi echo $ac_n "checking for --enable-stopwatch""... $ac_c" 1>&6 -echo "configure:3489: checking for --enable-stopwatch" >&5 +echo "configure:3496: checking for --enable-stopwatch" >&5 no_cache=0 # Check whether --enable-stopwatch or --disable-stopwatch was given. if test "${enable_stopwatch+set}" = set; then @@ -3524,7 +3531,7 @@ fi echo $ac_n "checking for --enable-dialupman""... $ac_c" 1>&6 -echo "configure:3528: checking for --enable-dialupman" >&5 +echo "configure:3535: checking for --enable-dialupman" >&5 no_cache=0 # Check whether --enable-dialupman or --disable-dialupman was given. if test "${enable_dialupman+set}" = set; then @@ -3563,7 +3570,7 @@ fi echo $ac_n "checking for --enable-apple_ieee""... $ac_c" 1>&6 -echo "configure:3567: checking for --enable-apple_ieee" >&5 +echo "configure:3574: checking for --enable-apple_ieee" >&5 no_cache=0 # Check whether --enable-apple_ieee or --disable-apple_ieee was given. if test "${enable_apple_ieee+set}" = set; then @@ -3602,7 +3609,7 @@ fi echo $ac_n "checking for --enable-timer""... $ac_c" 1>&6 -echo "configure:3606: checking for --enable-timer" >&5 +echo "configure:3613: checking for --enable-timer" >&5 no_cache=0 # Check whether --enable-timer or --disable-timer was given. if test "${enable_timer+set}" = set; then @@ -3641,7 +3648,7 @@ fi echo $ac_n "checking for --enable-wave""... $ac_c" 1>&6 -echo "configure:3645: checking for --enable-wave" >&5 +echo "configure:3652: checking for --enable-wave" >&5 no_cache=0 # Check whether --enable-wave or --disable-wave was given. if test "${enable_wave+set}" = set; then @@ -3680,7 +3687,7 @@ fi echo $ac_n "checking for --enable-fraction""... $ac_c" 1>&6 -echo "configure:3684: checking for --enable-fraction" >&5 +echo "configure:3691: checking for --enable-fraction" >&5 no_cache=0 # Check whether --enable-fraction or --disable-fraction was given. if test "${enable_fraction+set}" = set; then @@ -3719,7 +3726,7 @@ fi echo $ac_n "checking for --enable-dynlib""... $ac_c" 1>&6 -echo "configure:3723: checking for --enable-dynlib" >&5 +echo "configure:3730: checking for --enable-dynlib" >&5 no_cache=0 # Check whether --enable-dynlib or --disable-dynlib was given. if test "${enable_dynlib+set}" = set; then @@ -3758,7 +3765,7 @@ fi echo $ac_n "checking for --enable-dynamicloader""... $ac_c" 1>&6 -echo "configure:3762: checking for --enable-dynamicloader" >&5 +echo "configure:3769: checking for --enable-dynamicloader" >&5 no_cache=0 # Check whether --enable-dynamicloader or --disable-dynamicloader was given. if test "${enable_dynamicloader+set}" = set; then @@ -3797,7 +3804,7 @@ fi echo $ac_n "checking for --enable-longlong""... $ac_c" 1>&6 -echo "configure:3801: checking for --enable-longlong" >&5 +echo "configure:3808: checking for --enable-longlong" >&5 no_cache=0 # Check whether --enable-longlong or --disable-longlong was given. if test "${enable_longlong+set}" = set; then @@ -3836,7 +3843,7 @@ fi echo $ac_n "checking for --enable-geometry""... $ac_c" 1>&6 -echo "configure:3840: checking for --enable-geometry" >&5 +echo "configure:3847: checking for --enable-geometry" >&5 no_cache=0 # Check whether --enable-geometry or --disable-geometry was given. if test "${enable_geometry+set}" = set; then @@ -3875,7 +3882,7 @@ fi echo $ac_n "checking for --enable-log""... $ac_c" 1>&6 -echo "configure:3879: checking for --enable-log" >&5 +echo "configure:3886: checking for --enable-log" >&5 no_cache=0 # Check whether --enable-log or --disable-log was given. if test "${enable_log+set}" = set; then @@ -3914,7 +3921,7 @@ fi echo $ac_n "checking for --enable-streams""... $ac_c" 1>&6 -echo "configure:3918: checking for --enable-streams" >&5 +echo "configure:3925: checking for --enable-streams" >&5 no_cache=0 # Check whether --enable-streams or --disable-streams was given. if test "${enable_streams+set}" = set; then @@ -3953,7 +3960,7 @@ fi echo $ac_n "checking for --enable-file""... $ac_c" 1>&6 -echo "configure:3957: checking for --enable-file" >&5 +echo "configure:3964: checking for --enable-file" >&5 no_cache=0 # Check whether --enable-file or --disable-file was given. if test "${enable_file+set}" = set; then @@ -3992,7 +3999,7 @@ fi echo $ac_n "checking for --enable-ffile""... $ac_c" 1>&6 -echo "configure:3996: checking for --enable-ffile" >&5 +echo "configure:4003: checking for --enable-ffile" >&5 no_cache=0 # Check whether --enable-ffile or --disable-ffile was given. if test "${enable_ffile+set}" = set; then @@ -4031,7 +4038,7 @@ fi echo $ac_n "checking for --enable-textbuf""... $ac_c" 1>&6 -echo "configure:4035: checking for --enable-textbuf" >&5 +echo "configure:4042: checking for --enable-textbuf" >&5 no_cache=0 # Check whether --enable-textbuf or --disable-textbuf was given. if test "${enable_textbuf+set}" = set; then @@ -4070,7 +4077,7 @@ fi echo $ac_n "checking for --enable-textfile""... $ac_c" 1>&6 -echo "configure:4074: checking for --enable-textfile" >&5 +echo "configure:4081: checking for --enable-textfile" >&5 no_cache=0 # Check whether --enable-textfile or --disable-textfile was given. if test "${enable_textfile+set}" = set; then @@ -4109,7 +4116,7 @@ fi echo $ac_n "checking for --enable-fontmap""... $ac_c" 1>&6 -echo "configure:4113: checking for --enable-fontmap" >&5 +echo "configure:4120: checking for --enable-fontmap" >&5 no_cache=0 # Check whether --enable-fontmap or --disable-fontmap was given. if test "${enable_fontmap+set}" = set; then @@ -4148,7 +4155,7 @@ fi echo $ac_n "checking for --enable-unicode""... $ac_c" 1>&6 -echo "configure:4152: checking for --enable-unicode" >&5 +echo "configure:4159: checking for --enable-unicode" >&5 no_cache=0 # Check whether --enable-unicode or --disable-unicode was given. if test "${enable_unicode+set}" = set; then @@ -4187,7 +4194,7 @@ fi echo $ac_n "checking for --enable-mslu""... $ac_c" 1>&6 -echo "configure:4191: checking for --enable-mslu" >&5 +echo "configure:4198: checking for --enable-mslu" >&5 no_cache=0 # Check whether --enable-mslu or --disable-mslu was given. if test "${enable_mslu+set}" = set; then @@ -4226,7 +4233,7 @@ fi echo $ac_n "checking for --enable-wxprintfv""... $ac_c" 1>&6 -echo "configure:4230: checking for --enable-wxprintfv" >&5 +echo "configure:4237: checking for --enable-wxprintfv" >&5 no_cache=0 # Check whether --enable-wxprintfv or --disable-wxprintfv was given. if test "${enable_wxprintfv+set}" = set; then @@ -4265,7 +4272,7 @@ fi echo $ac_n "checking for --enable-std_iostreams""... $ac_c" 1>&6 -echo "configure:4269: checking for --enable-std_iostreams" >&5 +echo "configure:4276: checking for --enable-std_iostreams" >&5 no_cache=0 # Check whether --enable-std_iostreams or --disable-std_iostreams was given. if test "${enable_std_iostreams+set}" = set; then @@ -4304,7 +4311,7 @@ fi echo $ac_n "checking for --enable-filesystem""... $ac_c" 1>&6 -echo "configure:4308: checking for --enable-filesystem" >&5 +echo "configure:4315: checking for --enable-filesystem" >&5 no_cache=0 # Check whether --enable-filesystem or --disable-filesystem was given. if test "${enable_filesystem+set}" = set; then @@ -4343,7 +4350,7 @@ fi echo $ac_n "checking for --enable-fs_inet""... $ac_c" 1>&6 -echo "configure:4347: checking for --enable-fs_inet" >&5 +echo "configure:4354: checking for --enable-fs_inet" >&5 no_cache=0 # Check whether --enable-fs_inet or --disable-fs_inet was given. if test "${enable_fs_inet+set}" = set; then @@ -4382,7 +4389,7 @@ fi echo $ac_n "checking for --enable-fs_zip""... $ac_c" 1>&6 -echo "configure:4386: checking for --enable-fs_zip" >&5 +echo "configure:4393: checking for --enable-fs_zip" >&5 no_cache=0 # Check whether --enable-fs_zip or --disable-fs_zip was given. if test "${enable_fs_zip+set}" = set; then @@ -4421,7 +4428,7 @@ fi echo $ac_n "checking for --enable-zipstream""... $ac_c" 1>&6 -echo "configure:4425: checking for --enable-zipstream" >&5 +echo "configure:4432: checking for --enable-zipstream" >&5 no_cache=0 # Check whether --enable-zipstream or --disable-zipstream was given. if test "${enable_zipstream+set}" = set; then @@ -4461,7 +4468,7 @@ fi echo $ac_n "checking for --enable-catch_segvs""... $ac_c" 1>&6 -echo "configure:4465: checking for --enable-catch_segvs" >&5 +echo "configure:4472: checking for --enable-catch_segvs" >&5 no_cache=0 # Check whether --enable-catch_segvs or --disable-catch_segvs was given. if test "${enable_catch_segvs+set}" = set; then @@ -4500,7 +4507,7 @@ fi echo $ac_n "checking for --enable-snglinst""... $ac_c" 1>&6 -echo "configure:4504: checking for --enable-snglinst" >&5 +echo "configure:4511: checking for --enable-snglinst" >&5 no_cache=0 # Check whether --enable-snglinst or --disable-snglinst was given. if test "${enable_snglinst+set}" = set; then @@ -4540,7 +4547,7 @@ fi echo $ac_n "checking for --enable-mimetype""... $ac_c" 1>&6 -echo "configure:4544: checking for --enable-mimetype" >&5 +echo "configure:4551: checking for --enable-mimetype" >&5 no_cache=0 # Check whether --enable-mimetype or --disable-mimetype was given. if test "${enable_mimetype+set}" = set; then @@ -4579,7 +4586,7 @@ fi echo $ac_n "checking for --enable-system_options""... $ac_c" 1>&6 -echo "configure:4583: checking for --enable-system_options" >&5 +echo "configure:4590: checking for --enable-system_options" >&5 no_cache=0 # Check whether --enable-system_options or --disable-system_options was given. if test "${enable_system_options+set}" = set; then @@ -4619,7 +4626,7 @@ fi echo $ac_n "checking for --enable-url""... $ac_c" 1>&6 -echo "configure:4623: checking for --enable-url" >&5 +echo "configure:4630: checking for --enable-url" >&5 no_cache=0 # Check whether --enable-url or --disable-url was given. if test "${enable_url+set}" = set; then @@ -4658,7 +4665,7 @@ fi echo $ac_n "checking for --enable-protocol""... $ac_c" 1>&6 -echo "configure:4662: checking for --enable-protocol" >&5 +echo "configure:4669: checking for --enable-protocol" >&5 no_cache=0 # Check whether --enable-protocol or --disable-protocol was given. if test "${enable_protocol+set}" = set; then @@ -4697,7 +4704,7 @@ fi echo $ac_n "checking for --enable-protocol_http""... $ac_c" 1>&6 -echo "configure:4701: checking for --enable-protocol_http" >&5 +echo "configure:4708: checking for --enable-protocol_http" >&5 no_cache=0 # Check whether --enable-protocol_http or --disable-protocol_http was given. if test "${enable_protocol_http+set}" = set; then @@ -4736,7 +4743,7 @@ fi echo $ac_n "checking for --enable-protocol_ftp""... $ac_c" 1>&6 -echo "configure:4740: checking for --enable-protocol_ftp" >&5 +echo "configure:4747: checking for --enable-protocol_ftp" >&5 no_cache=0 # Check whether --enable-protocol_ftp or --disable-protocol_ftp was given. if test "${enable_protocol_ftp+set}" = set; then @@ -4775,7 +4782,7 @@ fi echo $ac_n "checking for --enable-protocol_file""... $ac_c" 1>&6 -echo "configure:4779: checking for --enable-protocol_file" >&5 +echo "configure:4786: checking for --enable-protocol_file" >&5 no_cache=0 # Check whether --enable-protocol_file or --disable-protocol_file was given. if test "${enable_protocol_file+set}" = set; then @@ -4817,7 +4824,7 @@ fi echo $ac_n "checking for --enable-threads""... $ac_c" 1>&6 -echo "configure:4821: checking for --enable-threads" >&5 +echo "configure:4828: checking for --enable-threads" >&5 no_cache=0 # Check whether --enable-threads or --disable-threads was given. if test "${enable_threads+set}" = set; then @@ -4860,7 +4867,7 @@ if test "$wxUSE_GUI" = "yes"; then echo $ac_n "checking for --enable-docview""... $ac_c" 1>&6 -echo "configure:4864: checking for --enable-docview" >&5 +echo "configure:4871: checking for --enable-docview" >&5 no_cache=0 # Check whether --enable-docview or --disable-docview was given. if test "${enable_docview+set}" = set; then @@ -4899,7 +4906,7 @@ fi echo $ac_n "checking for --enable-help""... $ac_c" 1>&6 -echo "configure:4903: checking for --enable-help" >&5 +echo "configure:4910: checking for --enable-help" >&5 no_cache=0 # Check whether --enable-help or --disable-help was given. if test "${enable_help+set}" = set; then @@ -4938,7 +4945,7 @@ fi echo $ac_n "checking for --enable-mshtmlhelp""... $ac_c" 1>&6 -echo "configure:4942: checking for --enable-mshtmlhelp" >&5 +echo "configure:4949: checking for --enable-mshtmlhelp" >&5 no_cache=0 # Check whether --enable-mshtmlhelp or --disable-mshtmlhelp was given. if test "${enable_mshtmlhelp+set}" = set; then @@ -4977,7 +4984,7 @@ fi echo $ac_n "checking for --enable-html""... $ac_c" 1>&6 -echo "configure:4981: checking for --enable-html" >&5 +echo "configure:4988: checking for --enable-html" >&5 no_cache=0 # Check whether --enable-html or --disable-html was given. if test "${enable_html+set}" = set; then @@ -5016,7 +5023,7 @@ fi echo $ac_n "checking for --enable-htmlhelp""... $ac_c" 1>&6 -echo "configure:5020: checking for --enable-htmlhelp" >&5 +echo "configure:5027: checking for --enable-htmlhelp" >&5 no_cache=0 # Check whether --enable-htmlhelp or --disable-htmlhelp was given. if test "${enable_htmlhelp+set}" = set; then @@ -5055,7 +5062,7 @@ fi echo $ac_n "checking for --enable-constraints""... $ac_c" 1>&6 -echo "configure:5059: checking for --enable-constraints" >&5 +echo "configure:5066: checking for --enable-constraints" >&5 no_cache=0 # Check whether --enable-constraints or --disable-constraints was given. if test "${enable_constraints+set}" = set; then @@ -5094,7 +5101,7 @@ fi echo $ac_n "checking for --enable-printarch""... $ac_c" 1>&6 -echo "configure:5098: checking for --enable-printarch" >&5 +echo "configure:5105: checking for --enable-printarch" >&5 no_cache=0 # Check whether --enable-printarch or --disable-printarch was given. if test "${enable_printarch+set}" = set; then @@ -5133,7 +5140,7 @@ fi echo $ac_n "checking for --enable-mdi""... $ac_c" 1>&6 -echo "configure:5137: checking for --enable-mdi" >&5 +echo "configure:5144: checking for --enable-mdi" >&5 no_cache=0 # Check whether --enable-mdi or --disable-mdi was given. if test "${enable_mdi+set}" = set; then @@ -5172,7 +5179,7 @@ fi echo $ac_n "checking for --enable-loggui""... $ac_c" 1>&6 -echo "configure:5176: checking for --enable-loggui" >&5 +echo "configure:5183: checking for --enable-loggui" >&5 no_cache=0 # Check whether --enable-loggui or --disable-loggui was given. if test "${enable_loggui+set}" = set; then @@ -5211,7 +5218,7 @@ fi echo $ac_n "checking for --enable-logwin""... $ac_c" 1>&6 -echo "configure:5215: checking for --enable-logwin" >&5 +echo "configure:5222: checking for --enable-logwin" >&5 no_cache=0 # Check whether --enable-logwin or --disable-logwin was given. if test "${enable_logwin+set}" = set; then @@ -5250,7 +5257,7 @@ fi echo $ac_n "checking for --enable-logdialog""... $ac_c" 1>&6 -echo "configure:5254: checking for --enable-logdialog" >&5 +echo "configure:5261: checking for --enable-logdialog" >&5 no_cache=0 # Check whether --enable-logdialog or --disable-logdialog was given. if test "${enable_logdialog+set}" = set; then @@ -5290,7 +5297,7 @@ fi echo $ac_n "checking for --enable-postscript""... $ac_c" 1>&6 -echo "configure:5294: checking for --enable-postscript" >&5 +echo "configure:5301: checking for --enable-postscript" >&5 no_cache=0 # Check whether --enable-postscript or --disable-postscript was given. if test "${enable_postscript+set}" = set; then @@ -5332,7 +5339,7 @@ fi echo $ac_n "checking for --enable-prologio""... $ac_c" 1>&6 -echo "configure:5336: checking for --enable-prologio" >&5 +echo "configure:5343: checking for --enable-prologio" >&5 no_cache=0 # Check whether --enable-prologio or --disable-prologio was given. if test "${enable_prologio+set}" = set; then @@ -5371,7 +5378,7 @@ fi echo $ac_n "checking for --enable-resources""... $ac_c" 1>&6 -echo "configure:5375: checking for --enable-resources" >&5 +echo "configure:5382: checking for --enable-resources" >&5 no_cache=0 # Check whether --enable-resources or --disable-resources was given. if test "${enable_resources+set}" = set; then @@ -5411,7 +5418,7 @@ fi echo $ac_n "checking for --enable-xresources""... $ac_c" 1>&6 -echo "configure:5415: checking for --enable-xresources" >&5 +echo "configure:5422: checking for --enable-xresources" >&5 no_cache=0 # Check whether --enable-xresources or --disable-xresources was given. if test "${enable_xresources+set}" = set; then @@ -5452,7 +5459,7 @@ fi echo $ac_n "checking for --enable-clipboard""... $ac_c" 1>&6 -echo "configure:5456: checking for --enable-clipboard" >&5 +echo "configure:5463: checking for --enable-clipboard" >&5 no_cache=0 # Check whether --enable-clipboard or --disable-clipboard was given. if test "${enable_clipboard+set}" = set; then @@ -5491,7 +5498,7 @@ fi echo $ac_n "checking for --enable-dnd""... $ac_c" 1>&6 -echo "configure:5495: checking for --enable-dnd" >&5 +echo "configure:5502: checking for --enable-dnd" >&5 no_cache=0 # Check whether --enable-dnd or --disable-dnd was given. if test "${enable_dnd+set}" = set; then @@ -5530,7 +5537,7 @@ fi echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6 -echo "configure:5534: checking for --enable-metafile" >&5 +echo "configure:5541: checking for --enable-metafile" >&5 no_cache=0 # Check whether --enable-metafile or --disable-metafile was given. if test "${enable_metafile+set}" = set; then @@ -5570,7 +5577,7 @@ fi echo $ac_n "checking for --enable-treelayout""... $ac_c" 1>&6 -echo "configure:5574: checking for --enable-treelayout" >&5 +echo "configure:5581: checking for --enable-treelayout" >&5 no_cache=0 # Check whether --enable-treelayout or --disable-treelayout was given. if test "${enable_treelayout+set}" = set; then @@ -5611,7 +5618,7 @@ fi echo $ac_n "checking for --enable-controls""... $ac_c" 1>&6 -echo "configure:5615: checking for --enable-controls" >&5 +echo "configure:5622: checking for --enable-controls" >&5 no_cache=0 # Check whether --enable-controls or --disable-controls was given. if test "${enable_controls+set}" = set; then @@ -5731,7 +5738,7 @@ fi echo $ac_n "checking for --enable-accel""... $ac_c" 1>&6 -echo "configure:5735: checking for --enable-accel" >&5 +echo "configure:5742: checking for --enable-accel" >&5 no_cache=0 # Check whether --enable-accel or --disable-accel was given. if test "${enable_accel+set}" = set; then @@ -5770,7 +5777,7 @@ fi echo $ac_n "checking for --enable-button""... $ac_c" 1>&6 -echo "configure:5774: checking for --enable-button" >&5 +echo "configure:5781: checking for --enable-button" >&5 no_cache=0 # Check whether --enable-button or --disable-button was given. if test "${enable_button+set}" = set; then @@ -5809,7 +5816,7 @@ fi echo $ac_n "checking for --enable-bmpbutton""... $ac_c" 1>&6 -echo "configure:5813: checking for --enable-bmpbutton" >&5 +echo "configure:5820: checking for --enable-bmpbutton" >&5 no_cache=0 # Check whether --enable-bmpbutton or --disable-bmpbutton was given. if test "${enable_bmpbutton+set}" = set; then @@ -5848,7 +5855,7 @@ fi echo $ac_n "checking for --enable-calendar""... $ac_c" 1>&6 -echo "configure:5852: checking for --enable-calendar" >&5 +echo "configure:5859: checking for --enable-calendar" >&5 no_cache=0 # Check whether --enable-calendar or --disable-calendar was given. if test "${enable_calendar+set}" = set; then @@ -5887,7 +5894,7 @@ fi echo $ac_n "checking for --enable-caret""... $ac_c" 1>&6 -echo "configure:5891: checking for --enable-caret" >&5 +echo "configure:5898: checking for --enable-caret" >&5 no_cache=0 # Check whether --enable-caret or --disable-caret was given. if test "${enable_caret+set}" = set; then @@ -5926,7 +5933,7 @@ fi echo $ac_n "checking for --enable-checkbox""... $ac_c" 1>&6 -echo "configure:5930: checking for --enable-checkbox" >&5 +echo "configure:5937: checking for --enable-checkbox" >&5 no_cache=0 # Check whether --enable-checkbox or --disable-checkbox was given. if test "${enable_checkbox+set}" = set; then @@ -5965,7 +5972,7 @@ fi echo $ac_n "checking for --enable-checklst""... $ac_c" 1>&6 -echo "configure:5969: checking for --enable-checklst" >&5 +echo "configure:5976: checking for --enable-checklst" >&5 no_cache=0 # Check whether --enable-checklst or --disable-checklst was given. if test "${enable_checklst+set}" = set; then @@ -6004,7 +6011,7 @@ fi echo $ac_n "checking for --enable-choice""... $ac_c" 1>&6 -echo "configure:6008: checking for --enable-choice" >&5 +echo "configure:6015: checking for --enable-choice" >&5 no_cache=0 # Check whether --enable-choice or --disable-choice was given. if test "${enable_choice+set}" = set; then @@ -6043,7 +6050,7 @@ fi echo $ac_n "checking for --enable-combobox""... $ac_c" 1>&6 -echo "configure:6047: checking for --enable-combobox" >&5 +echo "configure:6054: checking for --enable-combobox" >&5 no_cache=0 # Check whether --enable-combobox or --disable-combobox was given. if test "${enable_combobox+set}" = set; then @@ -6082,7 +6089,7 @@ fi echo $ac_n "checking for --enable-gauge""... $ac_c" 1>&6 -echo "configure:6086: checking for --enable-gauge" >&5 +echo "configure:6093: checking for --enable-gauge" >&5 no_cache=0 # Check whether --enable-gauge or --disable-gauge was given. if test "${enable_gauge+set}" = set; then @@ -6121,7 +6128,7 @@ fi echo $ac_n "checking for --enable-grid""... $ac_c" 1>&6 -echo "configure:6125: checking for --enable-grid" >&5 +echo "configure:6132: checking for --enable-grid" >&5 no_cache=0 # Check whether --enable-grid or --disable-grid was given. if test "${enable_grid+set}" = set; then @@ -6160,7 +6167,7 @@ fi echo $ac_n "checking for --enable-newgrid""... $ac_c" 1>&6 -echo "configure:6164: checking for --enable-newgrid" >&5 +echo "configure:6171: checking for --enable-newgrid" >&5 no_cache=0 # Check whether --enable-newgrid or --disable-newgrid was given. if test "${enable_newgrid+set}" = set; then @@ -6199,7 +6206,7 @@ fi echo $ac_n "checking for --enable-imaglist""... $ac_c" 1>&6 -echo "configure:6203: checking for --enable-imaglist" >&5 +echo "configure:6210: checking for --enable-imaglist" >&5 no_cache=0 # Check whether --enable-imaglist or --disable-imaglist was given. if test "${enable_imaglist+set}" = set; then @@ -6238,7 +6245,7 @@ fi echo $ac_n "checking for --enable-listbox""... $ac_c" 1>&6 -echo "configure:6242: checking for --enable-listbox" >&5 +echo "configure:6249: checking for --enable-listbox" >&5 no_cache=0 # Check whether --enable-listbox or --disable-listbox was given. if test "${enable_listbox+set}" = set; then @@ -6277,7 +6284,7 @@ fi echo $ac_n "checking for --enable-listctrl""... $ac_c" 1>&6 -echo "configure:6281: checking for --enable-listctrl" >&5 +echo "configure:6288: checking for --enable-listctrl" >&5 no_cache=0 # Check whether --enable-listctrl or --disable-listctrl was given. if test "${enable_listctrl+set}" = set; then @@ -6316,7 +6323,7 @@ fi echo $ac_n "checking for --enable-notebook""... $ac_c" 1>&6 -echo "configure:6320: checking for --enable-notebook" >&5 +echo "configure:6327: checking for --enable-notebook" >&5 no_cache=0 # Check whether --enable-notebook or --disable-notebook was given. if test "${enable_notebook+set}" = set; then @@ -6355,7 +6362,7 @@ fi echo $ac_n "checking for --enable-propsheet""... $ac_c" 1>&6 -echo "configure:6359: checking for --enable-propsheet" >&5 +echo "configure:6366: checking for --enable-propsheet" >&5 no_cache=0 # Check whether --enable-propsheet or --disable-propsheet was given. if test "${enable_propsheet+set}" = set; then @@ -6394,7 +6401,7 @@ fi echo $ac_n "checking for --enable-radiobox""... $ac_c" 1>&6 -echo "configure:6398: checking for --enable-radiobox" >&5 +echo "configure:6405: checking for --enable-radiobox" >&5 no_cache=0 # Check whether --enable-radiobox or --disable-radiobox was given. if test "${enable_radiobox+set}" = set; then @@ -6433,7 +6440,7 @@ fi echo $ac_n "checking for --enable-radiobtn""... $ac_c" 1>&6 -echo "configure:6437: checking for --enable-radiobtn" >&5 +echo "configure:6444: checking for --enable-radiobtn" >&5 no_cache=0 # Check whether --enable-radiobtn or --disable-radiobtn was given. if test "${enable_radiobtn+set}" = set; then @@ -6472,7 +6479,7 @@ fi echo $ac_n "checking for --enable-sash""... $ac_c" 1>&6 -echo "configure:6476: checking for --enable-sash" >&5 +echo "configure:6483: checking for --enable-sash" >&5 no_cache=0 # Check whether --enable-sash or --disable-sash was given. if test "${enable_sash+set}" = set; then @@ -6511,7 +6518,7 @@ fi echo $ac_n "checking for --enable-scrollbar""... $ac_c" 1>&6 -echo "configure:6515: checking for --enable-scrollbar" >&5 +echo "configure:6522: checking for --enable-scrollbar" >&5 no_cache=0 # Check whether --enable-scrollbar or --disable-scrollbar was given. if test "${enable_scrollbar+set}" = set; then @@ -6550,7 +6557,7 @@ fi echo $ac_n "checking for --enable-slider""... $ac_c" 1>&6 -echo "configure:6554: checking for --enable-slider" >&5 +echo "configure:6561: checking for --enable-slider" >&5 no_cache=0 # Check whether --enable-slider or --disable-slider was given. if test "${enable_slider+set}" = set; then @@ -6589,7 +6596,7 @@ fi echo $ac_n "checking for --enable-spinbtn""... $ac_c" 1>&6 -echo "configure:6593: checking for --enable-spinbtn" >&5 +echo "configure:6600: checking for --enable-spinbtn" >&5 no_cache=0 # Check whether --enable-spinbtn or --disable-spinbtn was given. if test "${enable_spinbtn+set}" = set; then @@ -6628,7 +6635,7 @@ fi echo $ac_n "checking for --enable-spinctrl""... $ac_c" 1>&6 -echo "configure:6632: checking for --enable-spinctrl" >&5 +echo "configure:6639: checking for --enable-spinctrl" >&5 no_cache=0 # Check whether --enable-spinctrl or --disable-spinctrl was given. if test "${enable_spinctrl+set}" = set; then @@ -6667,7 +6674,7 @@ fi echo $ac_n "checking for --enable-splitter""... $ac_c" 1>&6 -echo "configure:6671: checking for --enable-splitter" >&5 +echo "configure:6678: checking for --enable-splitter" >&5 no_cache=0 # Check whether --enable-splitter or --disable-splitter was given. if test "${enable_splitter+set}" = set; then @@ -6706,7 +6713,7 @@ fi echo $ac_n "checking for --enable-statbmp""... $ac_c" 1>&6 -echo "configure:6710: checking for --enable-statbmp" >&5 +echo "configure:6717: checking for --enable-statbmp" >&5 no_cache=0 # Check whether --enable-statbmp or --disable-statbmp was given. if test "${enable_statbmp+set}" = set; then @@ -6745,7 +6752,7 @@ fi echo $ac_n "checking for --enable-statbox""... $ac_c" 1>&6 -echo "configure:6749: checking for --enable-statbox" >&5 +echo "configure:6756: checking for --enable-statbox" >&5 no_cache=0 # Check whether --enable-statbox or --disable-statbox was given. if test "${enable_statbox+set}" = set; then @@ -6784,7 +6791,7 @@ fi echo $ac_n "checking for --enable-statline""... $ac_c" 1>&6 -echo "configure:6788: checking for --enable-statline" >&5 +echo "configure:6795: checking for --enable-statline" >&5 no_cache=0 # Check whether --enable-statline or --disable-statline was given. if test "${enable_statline+set}" = set; then @@ -6823,7 +6830,7 @@ fi echo $ac_n "checking for --enable-stattext""... $ac_c" 1>&6 -echo "configure:6827: checking for --enable-stattext" >&5 +echo "configure:6834: checking for --enable-stattext" >&5 no_cache=0 # Check whether --enable-stattext or --disable-stattext was given. if test "${enable_stattext+set}" = set; then @@ -6862,7 +6869,7 @@ fi echo $ac_n "checking for --enable-statusbar""... $ac_c" 1>&6 -echo "configure:6866: checking for --enable-statusbar" >&5 +echo "configure:6873: checking for --enable-statusbar" >&5 no_cache=0 # Check whether --enable-statusbar or --disable-statusbar was given. if test "${enable_statusbar+set}" = set; then @@ -6901,7 +6908,7 @@ fi echo $ac_n "checking for --enable-tabdialog""... $ac_c" 1>&6 -echo "configure:6905: checking for --enable-tabdialog" >&5 +echo "configure:6912: checking for --enable-tabdialog" >&5 no_cache=0 # Check whether --enable-tabdialog or --disable-tabdialog was given. if test "${enable_tabdialog+set}" = set; then @@ -6940,7 +6947,7 @@ fi echo $ac_n "checking for --enable-textctrl""... $ac_c" 1>&6 -echo "configure:6944: checking for --enable-textctrl" >&5 +echo "configure:6951: checking for --enable-textctrl" >&5 no_cache=0 # Check whether --enable-textctrl or --disable-textctrl was given. if test "${enable_textctrl+set}" = set; then @@ -6979,7 +6986,7 @@ fi echo $ac_n "checking for --enable-togglebtn""... $ac_c" 1>&6 -echo "configure:6983: checking for --enable-togglebtn" >&5 +echo "configure:6990: checking for --enable-togglebtn" >&5 no_cache=0 # Check whether --enable-togglebtn or --disable-togglebtn was given. if test "${enable_togglebtn+set}" = set; then @@ -7018,7 +7025,7 @@ fi echo $ac_n "checking for --enable-toolbar""... $ac_c" 1>&6 -echo "configure:7022: checking for --enable-toolbar" >&5 +echo "configure:7029: checking for --enable-toolbar" >&5 no_cache=0 # Check whether --enable-toolbar or --disable-toolbar was given. if test "${enable_toolbar+set}" = set; then @@ -7057,7 +7064,7 @@ fi echo $ac_n "checking for --enable-tbarnative""... $ac_c" 1>&6 -echo "configure:7061: checking for --enable-tbarnative" >&5 +echo "configure:7068: checking for --enable-tbarnative" >&5 no_cache=0 # Check whether --enable-tbarnative or --disable-tbarnative was given. if test "${enable_tbarnative+set}" = set; then @@ -7096,7 +7103,7 @@ fi echo $ac_n "checking for --enable-tbarsmpl""... $ac_c" 1>&6 -echo "configure:7100: checking for --enable-tbarsmpl" >&5 +echo "configure:7107: checking for --enable-tbarsmpl" >&5 no_cache=0 # Check whether --enable-tbarsmpl or --disable-tbarsmpl was given. if test "${enable_tbarsmpl+set}" = set; then @@ -7135,7 +7142,7 @@ fi echo $ac_n "checking for --enable-treectrl""... $ac_c" 1>&6 -echo "configure:7139: checking for --enable-treectrl" >&5 +echo "configure:7146: checking for --enable-treectrl" >&5 no_cache=0 # Check whether --enable-treectrl or --disable-treectrl was given. if test "${enable_treectrl+set}" = set; then @@ -7174,7 +7181,7 @@ fi echo $ac_n "checking for --enable-tipwindow""... $ac_c" 1>&6 -echo "configure:7178: checking for --enable-tipwindow" >&5 +echo "configure:7185: checking for --enable-tipwindow" >&5 no_cache=0 # Check whether --enable-tipwindow or --disable-tipwindow was given. if test "${enable_tipwindow+set}" = set; then @@ -7213,7 +7220,7 @@ fi echo $ac_n "checking for --enable-popupwin""... $ac_c" 1>&6 -echo "configure:7217: checking for --enable-popupwin" >&5 +echo "configure:7224: checking for --enable-popupwin" >&5 no_cache=0 # Check whether --enable-popupwin or --disable-popupwin was given. if test "${enable_popupwin+set}" = set; then @@ -7254,7 +7261,7 @@ fi echo $ac_n "checking for --enable-commondlg""... $ac_c" 1>&6 -echo "configure:7258: checking for --enable-commondlg" >&5 +echo "configure:7265: checking for --enable-commondlg" >&5 no_cache=0 # Check whether --enable-commondlg or --disable-commondlg was given. if test "${enable_commondlg+set}" = set; then @@ -7293,7 +7300,7 @@ fi echo $ac_n "checking for --enable-choicedlg""... $ac_c" 1>&6 -echo "configure:7297: checking for --enable-choicedlg" >&5 +echo "configure:7304: checking for --enable-choicedlg" >&5 no_cache=0 # Check whether --enable-choicedlg or --disable-choicedlg was given. if test "${enable_choicedlg+set}" = set; then @@ -7332,7 +7339,7 @@ fi echo $ac_n "checking for --enable-coldlg""... $ac_c" 1>&6 -echo "configure:7336: checking for --enable-coldlg" >&5 +echo "configure:7343: checking for --enable-coldlg" >&5 no_cache=0 # Check whether --enable-coldlg or --disable-coldlg was given. if test "${enable_coldlg+set}" = set; then @@ -7371,7 +7378,7 @@ fi echo $ac_n "checking for --enable-filedlg""... $ac_c" 1>&6 -echo "configure:7375: checking for --enable-filedlg" >&5 +echo "configure:7382: checking for --enable-filedlg" >&5 no_cache=0 # Check whether --enable-filedlg or --disable-filedlg was given. if test "${enable_filedlg+set}" = set; then @@ -7410,7 +7417,7 @@ fi echo $ac_n "checking for --enable-finddlg""... $ac_c" 1>&6 -echo "configure:7414: checking for --enable-finddlg" >&5 +echo "configure:7421: checking for --enable-finddlg" >&5 no_cache=0 # Check whether --enable-finddlg or --disable-finddlg was given. if test "${enable_finddlg+set}" = set; then @@ -7449,7 +7456,7 @@ fi echo $ac_n "checking for --enable-fontdlg""... $ac_c" 1>&6 -echo "configure:7453: checking for --enable-fontdlg" >&5 +echo "configure:7460: checking for --enable-fontdlg" >&5 no_cache=0 # Check whether --enable-fontdlg or --disable-fontdlg was given. if test "${enable_fontdlg+set}" = set; then @@ -7488,7 +7495,7 @@ fi echo $ac_n "checking for --enable-dirdlg""... $ac_c" 1>&6 -echo "configure:7492: checking for --enable-dirdlg" >&5 +echo "configure:7499: checking for --enable-dirdlg" >&5 no_cache=0 # Check whether --enable-dirdlg or --disable-dirdlg was given. if test "${enable_dirdlg+set}" = set; then @@ -7527,7 +7534,7 @@ fi echo $ac_n "checking for --enable-msgdlg""... $ac_c" 1>&6 -echo "configure:7531: checking for --enable-msgdlg" >&5 +echo "configure:7538: checking for --enable-msgdlg" >&5 no_cache=0 # Check whether --enable-msgdlg or --disable-msgdlg was given. if test "${enable_msgdlg+set}" = set; then @@ -7566,7 +7573,7 @@ fi echo $ac_n "checking for --enable-numberdlg""... $ac_c" 1>&6 -echo "configure:7570: checking for --enable-numberdlg" >&5 +echo "configure:7577: checking for --enable-numberdlg" >&5 no_cache=0 # Check whether --enable-numberdlg or --disable-numberdlg was given. if test "${enable_numberdlg+set}" = set; then @@ -7605,7 +7612,7 @@ fi echo $ac_n "checking for --enable-splash""... $ac_c" 1>&6 -echo "configure:7609: checking for --enable-splash" >&5 +echo "configure:7616: checking for --enable-splash" >&5 no_cache=0 # Check whether --enable-splash or --disable-splash was given. if test "${enable_splash+set}" = set; then @@ -7644,7 +7651,7 @@ fi echo $ac_n "checking for --enable-textdlg""... $ac_c" 1>&6 -echo "configure:7648: checking for --enable-textdlg" >&5 +echo "configure:7655: checking for --enable-textdlg" >&5 no_cache=0 # Check whether --enable-textdlg or --disable-textdlg was given. if test "${enable_textdlg+set}" = set; then @@ -7683,7 +7690,7 @@ fi echo $ac_n "checking for --enable-tipdlg""... $ac_c" 1>&6 -echo "configure:7687: checking for --enable-tipdlg" >&5 +echo "configure:7694: checking for --enable-tipdlg" >&5 no_cache=0 # Check whether --enable-tipdlg or --disable-tipdlg was given. if test "${enable_tipdlg+set}" = set; then @@ -7722,7 +7729,7 @@ fi echo $ac_n "checking for --enable-progressdlg""... $ac_c" 1>&6 -echo "configure:7726: checking for --enable-progressdlg" >&5 +echo "configure:7733: checking for --enable-progressdlg" >&5 no_cache=0 # Check whether --enable-progressdlg or --disable-progressdlg was given. if test "${enable_progressdlg+set}" = set; then @@ -7761,7 +7768,7 @@ fi echo $ac_n "checking for --enable-wizarddlg""... $ac_c" 1>&6 -echo "configure:7765: checking for --enable-wizarddlg" >&5 +echo "configure:7772: checking for --enable-wizarddlg" >&5 no_cache=0 # Check whether --enable-wizarddlg or --disable-wizarddlg was given. if test "${enable_wizarddlg+set}" = set; then @@ -7802,7 +7809,7 @@ fi echo $ac_n "checking for --enable-menus""... $ac_c" 1>&6 -echo "configure:7806: checking for --enable-menus" >&5 +echo "configure:7813: checking for --enable-menus" >&5 no_cache=0 # Check whether --enable-menus or --disable-menus was given. if test "${enable_menus+set}" = set; then @@ -7841,7 +7848,7 @@ fi echo $ac_n "checking for --enable-miniframe""... $ac_c" 1>&6 -echo "configure:7845: checking for --enable-miniframe" >&5 +echo "configure:7852: checking for --enable-miniframe" >&5 no_cache=0 # Check whether --enable-miniframe or --disable-miniframe was given. if test "${enable_miniframe+set}" = set; then @@ -7880,7 +7887,7 @@ fi echo $ac_n "checking for --enable-tooltips""... $ac_c" 1>&6 -echo "configure:7884: checking for --enable-tooltips" >&5 +echo "configure:7891: checking for --enable-tooltips" >&5 no_cache=0 # Check whether --enable-tooltips or --disable-tooltips was given. if test "${enable_tooltips+set}" = set; then @@ -7919,7 +7926,7 @@ fi echo $ac_n "checking for --enable-splines""... $ac_c" 1>&6 -echo "configure:7923: checking for --enable-splines" >&5 +echo "configure:7930: checking for --enable-splines" >&5 no_cache=0 # Check whether --enable-splines or --disable-splines was given. if test "${enable_splines+set}" = set; then @@ -7958,7 +7965,7 @@ fi echo $ac_n "checking for --enable-validators""... $ac_c" 1>&6 -echo "configure:7962: checking for --enable-validators" >&5 +echo "configure:7969: checking for --enable-validators" >&5 no_cache=0 # Check whether --enable-validators or --disable-validators was given. if test "${enable_validators+set}" = set; then @@ -7997,7 +8004,7 @@ fi echo $ac_n "checking for --enable-busyinfo""... $ac_c" 1>&6 -echo "configure:8001: checking for --enable-busyinfo" >&5 +echo "configure:8008: checking for --enable-busyinfo" >&5 no_cache=0 # Check whether --enable-busyinfo or --disable-busyinfo was given. if test "${enable_busyinfo+set}" = set; then @@ -8036,7 +8043,7 @@ fi echo $ac_n "checking for --enable-joystick""... $ac_c" 1>&6 -echo "configure:8040: checking for --enable-joystick" >&5 +echo "configure:8047: checking for --enable-joystick" >&5 no_cache=0 # Check whether --enable-joystick or --disable-joystick was given. if test "${enable_joystick+set}" = set; then @@ -8075,7 +8082,7 @@ fi echo $ac_n "checking for --enable-metafile""... $ac_c" 1>&6 -echo "configure:8079: checking for --enable-metafile" >&5 +echo "configure:8086: checking for --enable-metafile" >&5 no_cache=0 # Check whether --enable-metafile or --disable-metafile was given. if test "${enable_metafile+set}" = set; then @@ -8114,7 +8121,7 @@ fi echo $ac_n "checking for --enable-dragimage""... $ac_c" 1>&6 -echo "configure:8118: checking for --enable-dragimage" >&5 +echo "configure:8125: checking for --enable-dragimage" >&5 no_cache=0 # Check whether --enable-dragimage or --disable-dragimage was given. if test "${enable_dragimage+set}" = set; then @@ -8155,7 +8162,7 @@ fi echo $ac_n "checking for --enable-palette""... $ac_c" 1>&6 -echo "configure:8159: checking for --enable-palette" >&5 +echo "configure:8166: checking for --enable-palette" >&5 no_cache=0 # Check whether --enable-palette or --disable-palette was given. if test "${enable_palette+set}" = set; then @@ -8194,7 +8201,7 @@ fi echo $ac_n "checking for --enable-image""... $ac_c" 1>&6 -echo "configure:8198: checking for --enable-image" >&5 +echo "configure:8205: checking for --enable-image" >&5 no_cache=0 # Check whether --enable-image or --disable-image was given. if test "${enable_image+set}" = set; then @@ -8233,7 +8240,7 @@ fi echo $ac_n "checking for --enable-gif""... $ac_c" 1>&6 -echo "configure:8237: checking for --enable-gif" >&5 +echo "configure:8244: checking for --enable-gif" >&5 no_cache=0 # Check whether --enable-gif or --disable-gif was given. if test "${enable_gif+set}" = set; then @@ -8272,7 +8279,7 @@ fi echo $ac_n "checking for --enable-pcx""... $ac_c" 1>&6 -echo "configure:8276: checking for --enable-pcx" >&5 +echo "configure:8283: checking for --enable-pcx" >&5 no_cache=0 # Check whether --enable-pcx or --disable-pcx was given. if test "${enable_pcx+set}" = set; then @@ -8311,7 +8318,7 @@ fi echo $ac_n "checking for --enable-iff""... $ac_c" 1>&6 -echo "configure:8315: checking for --enable-iff" >&5 +echo "configure:8322: checking for --enable-iff" >&5 no_cache=0 # Check whether --enable-iff or --disable-iff was given. if test "${enable_iff+set}" = set; then @@ -8350,7 +8357,7 @@ fi echo $ac_n "checking for --enable-pnm""... $ac_c" 1>&6 -echo "configure:8354: checking for --enable-pnm" >&5 +echo "configure:8361: checking for --enable-pnm" >&5 no_cache=0 # Check whether --enable-pnm or --disable-pnm was given. if test "${enable_pnm+set}" = set; then @@ -8389,7 +8396,7 @@ fi echo $ac_n "checking for --enable-xpm""... $ac_c" 1>&6 -echo "configure:8393: checking for --enable-xpm" >&5 +echo "configure:8400: checking for --enable-xpm" >&5 no_cache=0 # Check whether --enable-xpm or --disable-xpm was given. if test "${enable_xpm+set}" = set; then @@ -8428,7 +8435,7 @@ fi echo $ac_n "checking for --enable-ico_cur""... $ac_c" 1>&6 -echo "configure:8432: checking for --enable-ico_cur" >&5 +echo "configure:8439: checking for --enable-ico_cur" >&5 no_cache=0 # Check whether --enable-ico_cur or --disable-ico_cur was given. if test "${enable_ico_cur+set}" = set; then @@ -8468,6 +8475,17 @@ fi fi +case "${host}" in + *-pc-os2_emx | *-pc-os2-emx ) + LEX_STEM="lexyy" + ;; + *) + PATH_IFS=':' + LEX_STEM="lex.yy" + ;; +esac + + echo "saving argument cache $wx_arg_cache_file" mv ${wx_arg_cache_file}.tmp ${wx_arg_cache_file} @@ -8475,7 +8493,7 @@ fi echo $ac_n "checking for toolkit""... $ac_c" 1>&6 -echo "configure:8479: checking for toolkit" >&5 +echo "configure:8497: checking for toolkit" >&5 if test "$wxUSE_GUI" = "yes"; then @@ -8501,18 +8519,11 @@ if test "$wxUSE_GUI" = "yes"; then fi NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MAC:-0} \ - + ${wxUSE_WINE:-0} + ${wxUSE_MSW:-0} + ${wxUSE_MGL:-0} + ${wxUSE_MICROWIN:-0}` + + ${wxUSE_WINE:-0} + ${wxUSE_MSW:-0} + ${wxUSE_MGL:-0} + ${wxUSE_MICROWIN:-0} + ${wxUSE_X11:-0}` - case "${host}" in + case "${host}" in *-pc-os2_emx | *-pc-os2-emx ) - # PATH_IFS is autodetected by OS/2's configure (usually ';') NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}` - LEX_STEM="lexyy" - ;; - *) - PATH_IFS=':' - LEX_STEM="lex.yy" - ;; esac case "$NUM_TOOLKITS" in @@ -8541,7 +8552,6 @@ if test "$wxUSE_GUI" = "yes"; then fi done else - PATH_IFS=':' echo "$ac_t""base ($host_alias hosted) only" 1>&6 fi @@ -8613,7 +8623,7 @@ fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8617: checking for $ac_word" >&5 +echo "configure:8627: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8643,7 +8653,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8647: checking for $ac_word" >&5 +echo "configure:8657: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8694,7 +8704,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8698: checking for $ac_word" >&5 +echo "configure:8708: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8726,7 +8736,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:8730: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:8740: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -8737,12 +8747,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 8741 "configure" +#line 8751 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:8746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:8756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -8768,12 +8778,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:8772: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:8782: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:8777: checking whether we are using GNU C" >&5 +echo "configure:8787: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8782,7 +8792,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8786: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:8796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -8801,7 +8811,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:8805: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:8815: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -8836,7 +8846,7 @@ fi CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'` echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:8840: checking how to run the C preprocessor" >&5 +echo "configure:8850: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -8851,13 +8861,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:8861: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:8871: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -8868,13 +8878,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:8878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:8888: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -8885,13 +8895,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:8895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:8905: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -8917,13 +8927,13 @@ echo "$ac_t""$CPP" 1>&6 if test $ac_cv_prog_gcc = yes; then echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 -echo "configure:8921: checking whether ${CC-cc} needs -traditional" >&5 +echo "configure:8931: checking whether ${CC-cc} needs -traditional" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_pattern="Autoconf.*'x'" cat > conftest.$ac_ext < Autoconf TIOCGETP @@ -8941,7 +8951,7 @@ rm -f conftest* if test $ac_cv_prog_gcc_traditional = no; then cat > conftest.$ac_ext < Autoconf TCGETA @@ -8977,7 +8987,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:8981: checking for $ac_word" >&5 +echo "configure:8991: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9009,7 +9019,7 @@ test -n "$CXX" || CXX="gcc" echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:9013: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 +echo "configure:9023: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -9020,12 +9030,12 @@ cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext << EOF -#line 9024 "configure" +#line 9034 "configure" #include "confdefs.h" int main(){return(0);} EOF -if { (eval echo configure:9029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:9039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cxx_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -9051,12 +9061,12 @@ if test $ac_cv_prog_cxx_works = no; then { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:9055: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:9065: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:9060: checking whether we are using GNU C++" >&5 +echo "configure:9070: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9065,7 +9075,7 @@ else yes; #endif EOF -if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:9079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no @@ -9084,7 +9094,7 @@ ac_test_CXXFLAGS="${CXXFLAGS+set}" ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:9088: checking whether ${CXX-g++} accepts -g" >&5 +echo "configure:9098: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9129,7 +9139,7 @@ cross_compiling=$ac_cv_prog_cc_cross # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:9133: checking for $ac_word" >&5 +echo "configure:9143: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9160,7 +9170,7 @@ fi # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:9164: checking for $ac_word" >&5 +echo "configure:9174: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9200,7 +9210,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:9204: checking for a BSD compatible install" >&5 +echo "configure:9214: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -9265,7 +9275,7 @@ esac # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:9269: checking for $ac_word" >&5 +echo "configure:9279: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9294,13 +9304,13 @@ fi echo $ac_n "checking if make is GNU make""... $ac_c" 1>&6 -echo "configure:9298: checking if make is GNU make" >&5 +echo "configure:9308: checking if make is GNU make" >&5 if eval "test \"`echo '$''{'wx_cv_prog_makeisgnu'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if ( ${SHELL-sh} -c "${MAKE-make} --version" 2> /dev/null | - egrep -s GNU); then + egrep -s GNU > /dev/null); then wx_cv_prog_makeisgnu="yes" else wx_cv_prog_makeisgnu="no" @@ -9320,7 +9330,7 @@ fi if test "x$wx_cv_prog_makeisgnu" != "xyes"; then echo $ac_n "checking if make supports VPATH""... $ac_c" 1>&6 -echo "configure:9324: checking if make supports VPATH" >&5 +echo "configure:9334: checking if make supports VPATH" >&5 if eval "test \"`echo '$''{'wx_cv_prog_makevpath'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9367,7 +9377,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:9371: checking for $ac_word" >&5 +echo "configure:9381: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9401,7 +9411,7 @@ test -n "$YACC" || YACC="yacc" # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:9405: checking for $ac_word" >&5 +echo "configure:9415: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9435,7 +9445,7 @@ then *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:9439: checking for yywrap in -l$ac_lib" >&5 +echo "configure:9449: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -9443,7 +9453,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:9468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -9478,7 +9488,7 @@ fi echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:9482: checking whether ln -s works" >&5 +echo "configure:9492: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -9630,17 +9640,17 @@ EOF if test "$wxUSE_REGEX" = "sys" -o "$wxUSE_REGEX" = "yes" ; then ac_safe=`echo "regex.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for regex.h""... $ac_c" 1>&6 -echo "configure:9634: checking for regex.h" >&5 +echo "configure:9644: checking for regex.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:9644: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:9654: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -9659,12 +9669,12 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then for ac_func in regcomp do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:9663: checking for $ac_func" >&5 +echo "configure:9673: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:9701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -9745,17 +9755,17 @@ EOF if test "$wxUSE_ZLIB" = "sys" -o "$wxUSE_ZLIB" = "yes" ; then ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for zlib.h""... $ac_c" 1>&6 -echo "configure:9749: checking for zlib.h" >&5 +echo "configure:9759: checking for zlib.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:9759: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:9769: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -9772,7 +9782,7 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6 -echo "configure:9776: checking for deflate in -lz" >&5 +echo "configure:9786: checking for deflate in -lz" >&5 ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -9780,7 +9790,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lz $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:9805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -9841,26 +9851,32 @@ if test "$wxUSE_LIBPNG" != "no" ; then #define wxUSE_LIBPNG 1 EOF + + if test "$wxUSE_MGL" = 1 -a "$wxUSE_LIBPNG" = "builtin" ; then + echo "configure: warning: wxMGL doesn't work with builtin png library, will use MGL one instead" 1>&2 + wxUSE_LIBPNG=sys + fi - if test "$wxUSE_LIBPNG" = "sys" -a "$wxUSE_ZLIB" != "sys" ; then + if test "$wxUSE_MGL" != 1 -a "$wxUSE_LIBPNG" = "sys" -a "$wxUSE_ZLIB" != "sys" ; then echo "configure: warning: system png library doesn't work without system zlib, will use built-in instead" 1>&2 wxUSE_LIBPNG=builtin fi - if test "$wxUSE_LIBPNG" = "sys" -o "$wxUSE_LIBPNG" = "yes" ; then - ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'` + if test "$wxUSE_MGL" != 1 ; then + if test "$wxUSE_LIBPNG" = "sys" -o "$wxUSE_LIBPNG" = "yes" ; then + ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for png.h""... $ac_c" 1>&6 -echo "configure:9854: checking for png.h" >&5 +echo "configure:9870: checking for png.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:9864: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:9880: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -9877,7 +9893,7 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for png_check_sig in -lpng""... $ac_c" 1>&6 -echo "configure:9881: checking for png_check_sig in -lpng" >&5 +echo "configure:9897: checking for png_check_sig in -lpng" >&5 ac_lib_var=`echo png'_'png_check_sig | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -9885,7 +9901,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lpng -lz -lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:9916: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -9916,21 +9932,22 @@ else echo "$ac_t""no" 1>&6 fi - + else echo "$ac_t""no" 1>&6 fi - if test "x$PNG_LINK" = "x" ; then - if test "$wxUSE_LIBPNG" = "sys" ; then - { echo "configure: error: system png library not found! Use --with-libpng=builtin to use built-in version" 1>&2; exit 1; } + if test "x$PNG_LINK" = "x" ; then + if test "$wxUSE_LIBPNG" = "sys" ; then + { echo "configure: error: system png library not found! Use --with-libpng=builtin to use built-in version" 1>&2; exit 1; } + else + echo "configure: warning: system png library not found, will use built-in instead" 1>&2 + wxUSE_LIBPNG=builtin + fi else - echo "configure: warning: system png library not found, will use built-in instead" 1>&2 - wxUSE_LIBPNG=builtin + wxUSE_LIBPNG=yes fi - else - wxUSE_LIBPNG=yes fi fi @@ -9950,26 +9967,32 @@ if test "$wxUSE_LIBJPEG" != "no" ; then EOF - if test "$wxUSE_LIBJPEG" = "sys" -o "$wxUSE_LIBJPEG" = "yes" ; then - echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6 -echo "configure:9956: checking for jpeglib.h" >&5 - if eval "test \"`echo '$''{'ac_cv_header_jpeglib_h'+set}'`\" = set"; then + if test "$wxUSE_MGL" = 1 -a "$wxUSE_LIBJPEG" = "builtin" ; then + echo "configure: warning: wxMGL doesn't work with builtin jpeg library, will use MGL one instead" 1>&2 + wxUSE_LIBJPEG=sys + fi + + if test "$wxUSE_MGL" != 1 ; then + if test "$wxUSE_LIBJPEG" = "sys" -o "$wxUSE_LIBJPEG" = "yes" ; then + echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6 +echo "configure:9979: checking for jpeglib.h" >&5 + if eval "test \"`echo '$''{'ac_cv_header_jpeglib_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < - #include - + #undef HAVE_STDLIB_H + #include + #include + int main() { - + ; return 0; } EOF -if { (eval echo configure:9973: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:9996: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_jpeglib_h=yes else @@ -9977,17 +10000,17 @@ else cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_jpeglib_h=no - + fi rm -f conftest* - + fi - echo "$ac_t""$ac_cv_header_jpeglib_h" 1>&6 + echo "$ac_t""$ac_cv_header_jpeglib_h" 1>&6 - if test "$ac_cv_header_jpeglib_h" = "yes"; then - echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6 -echo "configure:9991: checking for jpeg_read_header in -ljpeg" >&5 + if test "$ac_cv_header_jpeglib_h" = "yes"; then + echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6 +echo "configure:10014: checking for jpeg_read_header in -ljpeg" >&5 ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -9995,7 +10018,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ljpeg $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:10033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -10026,17 +10049,18 @@ else echo "$ac_t""no" 1>&6 fi - fi + fi - if test "x$JPEG_LINK" = "x" ; then - if test "$wxUSE_LIBJPEG" = "sys" ; then - { echo "configure: error: system jpeg library not found! Use --with-libjpeg=builtin to use built-in version" 1>&2; exit 1; } + if test "x$JPEG_LINK" = "x" ; then + if test "$wxUSE_LIBJPEG" = "sys" ; then + { echo "configure: error: system jpeg library not found! Use --with-libjpeg=builtin to use built-in version" 1>&2; exit 1; } + else + echo "configure: warning: system jpeg library not found, will use built-in instead" 1>&2 + wxUSE_LIBJPEG=builtin + fi else - echo "configure: warning: system jpeg library not found, will use built-in instead" 1>&2 - wxUSE_LIBJPEG=builtin + wxUSE_LIBJPEG=sys fi - else - wxUSE_LIBJPEG=sys fi fi @@ -10057,17 +10081,17 @@ EOF if test "$wxUSE_LIBTIFF" = "sys" -o "$wxUSE_LIBTIFF" = "yes" ; then ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6 -echo "configure:10061: checking for tiffio.h" >&5 +echo "configure:10085: checking for tiffio.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:10071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:10095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -10084,7 +10108,7 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for TIFFError in -ltiff""... $ac_c" 1>&6 -echo "configure:10088: checking for TIFFError in -ltiff" >&5 +echo "configure:10112: checking for TIFFError in -ltiff" >&5 ac_lib_var=`echo tiff'_'TIFFError | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -10092,7 +10116,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ltiff -lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:10131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -10147,107 +10171,6 @@ fi fi -FREETYPE_INCLUDE= -FREETYPE_LINK= -if test "$wxUSE_FREETYPE" != "no" ; then - cat >> confdefs.h <<\EOF -#define wxUSE_FREETYPE 1 -EOF - - - if test "$wxUSE_FREETYPE" = "sys" -o "$wxUSE_FREETYPE" = "yes" ; then - ac_safe=`echo "freetype.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for freetype.h""... $ac_c" 1>&6 -echo "configure:10162: checking for freetype.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:10172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - echo $ac_n "checking for FT_Render_Glyph in -lfreetype""... $ac_c" 1>&6 -echo "configure:10189: checking for FT_Render_Glyph in -lfreetype" >&5 -ac_lib_var=`echo freetype'_'FT_Render_Glyph | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lfreetype -lm $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - FREETYPE_LINK=" -lfreetype" -else - echo "$ac_t""no" 1>&6 -fi - - -else - echo "$ac_t""no" 1>&6 -fi - - - if test "x$FREETYPE_LINK" = "x" ; then - if test "$wxUSE_FREETYPE" = "sys" ; then - { echo "configure: error: system freetype library not found! Use --with-freetype=builtin to use built-in version" 1>&2; exit 1; } - else - echo "configure: warning: system freetype library not found, will use built-in instead" 1>&2 - wxUSE_FREETYPE=builtin - fi - else - wxUSE_FREETYPE=sys - fi - fi - - if test "$wxUSE_FREETYPE" = "builtin" ; then - FREETYPE_INCLUDE="-I\${top_srcdir}/src/freetype" - fi -fi - - AFMINSTALL= TOOLKIT= @@ -10259,17 +10182,17 @@ if test "$USE_WIN32" = 1 ; then do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:10263: checking for $ac_hdr" >&5 +echo "configure:10186: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:10273: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:10196: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -10297,17 +10220,17 @@ done ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for windows.h""... $ac_c" 1>&6 -echo "configure:10301: checking for windows.h" >&5 +echo "configure:10224: checking for windows.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:10311: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:10234: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -10333,13 +10256,13 @@ fi echo $ac_n "checking if w32api has good enough MSIE support""... $ac_c" 1>&6 -echo "configure:10337: checking if w32api has good enough MSIE support" >&5 +echo "configure:10260: checking if w32api has good enough MSIE support" >&5 if eval "test \"`echo '$''{'wx_cv_w32api_win32_ie'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -10355,7 +10278,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:10359: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:10282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_w32api_win32_ie=yes @@ -10414,7 +10337,7 @@ if test "$wxUSE_GUI" = "yes"; then if test "$wxUSE_GTK" = 1; then echo $ac_n "checking for GTK+ version""... $ac_c" 1>&6 -echo "configure:10418: checking for GTK+ version" >&5 +echo "configure:10341: checking for GTK+ version" >&5 gtk_version_cached=1 if eval "test \"`echo '$''{'wx_cv_lib_gtk'+set}'`\" = set"; then @@ -10431,23 +10354,7 @@ else wx_cv_lib_gtk= if test "x$wxUSE_GTK2" = "xyes"; then - # Check whether --with-gtk-prefix or --without-gtk-prefix was given. -if test "${with_gtk_prefix+set}" = set; then - withval="$with_gtk_prefix" - gtk_config_prefix="$withval" -else - gtk_config_prefix="" -fi - -# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given. -if test "${with_gtk_exec_prefix+set}" = set; then - withval="$with_gtk_exec_prefix" - gtk_config_exec_prefix="$withval" -else - gtk_config_exec_prefix="" -fi - -# Check whether --enable-gtktest or --disable-gtktest was given. + # Check whether --enable-gtktest or --disable-gtktest was given. if test "${enable_gtktest+set}" = set; then enableval="$enable_gtktest" : @@ -10456,41 +10363,31 @@ else fi + pkg_config_args=gtk+-2.0 for module in . $GTK_MODULES do case "$module" in - gthread) - gtk_config_args="$gtk_config_args gthread" + gthread) + pkg_config_args="$pkg_config_args gthread-2.0" ;; esac done - if test x$gtk_config_exec_prefix != x ; then - gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix" - if test x${GTK_CONFIG_2_0+set} != xset ; then - GTK_CONFIG_2_0=$gtk_config_exec_prefix/bin/gtk-config-2.0 - fi - fi - if test x$gtk_config_prefix != x ; then - gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix" - if test x${GTK_CONFIG_2_0+set} != xset ; then - GTK_CONFIG_2_0=$gtk_config_prefix/bin/gtk-config-2.0 - fi - fi + no_gtk="" - # Extract the first word of "gtk-config-2.0", so it can be a program name with args. -set dummy gtk-config-2.0; ac_word=$2 + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:10485: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG_2_0'+set}'`\" = set"; then +echo "configure:10382: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - case "$GTK_CONFIG_2_0" in + case "$PKG_CONFIG" in /*) - ac_cv_path_GTK_CONFIG_2_0="$GTK_CONFIG_2_0" # Let the user override the test with a path. + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. ;; ?:/*) - ac_cv_path_GTK_CONFIG_2_0="$GTK_CONFIG_2_0" # Let the user override the test with a dos path. + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" @@ -10498,36 +10395,61 @@ else for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_path_GTK_CONFIG_2_0="$ac_dir/$ac_word" + ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_path_GTK_CONFIG_2_0" && ac_cv_path_GTK_CONFIG_2_0="no" + test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no" ;; esac fi -GTK_CONFIG_2_0="$ac_cv_path_GTK_CONFIG_2_0" -if test -n "$GTK_CONFIG_2_0"; then - echo "$ac_t""$GTK_CONFIG_2_0" 1>&6 +PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +if test -n "$PKG_CONFIG"; then + echo "$ac_t""$PKG_CONFIG" 1>&6 else echo "$ac_t""no" 1>&6 fi - min_gtk_version=1.3.1 - echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6 -echo "configure:10520: checking for GTK - version >= $min_gtk_version" >&5 - no_gtk="" - if test "$GTK_CONFIG_2_0" = "no" ; then - no_gtk=yes + + if test x$PKG_CONFIG != xno ; then + if pkg-config --atleast-pkgconfig-version 0.7 ; then + : + else + echo *** pkg-config too old; version 0.7 or better required. + no_gtk=yes + PKG_CONFIG=no + fi else - GTK_CFLAGS=`$GTK_CONFIG_2_0 $gtk_config_args --cflags` - GTK_LIBS=`$GTK_CONFIG_2_0 $gtk_config_args --libs` - gtk_config_major_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \ + no_gtk=yes + fi + + min_gtk_version=2.0.0 + echo $ac_n "checking for GTK+ - version >= $min_gtk_version""... $ac_c" 1>&6 +echo "configure:10430: checking for GTK+ - version >= $min_gtk_version" >&5 + + if test x$PKG_CONFIG != xno ; then + ## don't try to run the test against uninstalled libtool libs + if $PKG_CONFIG --uninstalled $pkg_config_args; then + echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" + enable_gtktest=no + fi + + if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then + : + else + no_gtk=yes + fi + fi + + if test x"$no_gtk" = x ; then + GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` + GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` + gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` - gtk_config_minor_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \ + gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` - gtk_config_micro_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \ + gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" @@ -10539,14 +10461,14 @@ echo "configure:10520: checking for GTK - version >= $min_gtk_version" >&5 echo $ac_n "cross compiling; assumed OK... $ac_c" else cat > conftest.$ac_ext < #include #include -int +int main () { int major, minor, micro; @@ -10565,29 +10487,26 @@ main () (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { - printf("\n*** 'gtk-config-2.0 --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", + printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); - printf ("*** was found! If gtk-config-2.0 was correct, then it is best\n"); + printf ("*** was found! If pkg-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); - printf("*** If gtk-config-2.0 was wrong, set the environment variable GTK_CONFIG_2_0\n"); - printf("*** to point to the correct copy of gtk-config-2.0, and remove the file config.cache\n"); - printf("*** before re-running configure\n"); - } -#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION) + printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); + printf("*** to point to the correct configuration files\n"); + } else if ((gtk_major_version != GTK_MAJOR_VERSION) || - (gtk_minor_version != GTK_MINOR_VERSION) || + (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", - GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); + GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", - gtk_major_version, gtk_minor_version, gtk_micro_version); + gtk_major_version, gtk_minor_version, gtk_micro_version); } -#endif /* defined (GTK_MAJOR_VERSION) ... */ else { if ((gtk_major_version > major) || @@ -10601,14 +10520,14 @@ main () printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", - major, minor, micro); + major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); - printf("*** probably means that the wrong copy of the gtk-config-2.0 shell script is\n"); + printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); - printf("*** of GTK+, but you can also set the GTK_CONFIG_2_0 environment to point to the\n"); - printf("*** correct copy of gtk-config-2.0. (In this case, you will have to\n"); + printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); + printf("*** correct copy of pkg-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } @@ -10617,7 +10536,7 @@ main () } EOF -if { (eval echo configure:10621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:10540: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -10635,23 +10554,21 @@ fi fi if test "x$no_gtk" = x ; then echo "$ac_t""yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" 1>&6 - wx_cv_lib_gtk=2.0 + wx_cv_lib_gtk=2.0 else echo "$ac_t""no" 1>&6 - if test "$GTK_CONFIG_2_0" = "no" ; then - echo "*** The gtk-config-2.0 script installed by GTK could not be found" - echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the GTK_CONFIG_2_0 environment variable to the" - echo "*** full path to gtk-config-2.0." + if test "$PKG_CONFIG" = "no" ; then + echo "*** A new enough version of pkg-config was not found." + echo "*** See http://pkgconfig.sourceforge.net" else if test -f conf.gtktest ; then : else - echo "*** Could not run GTK test program, checking why..." + echo "*** Could not run GTK+ test program, checking why..." CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" cat > conftest.$ac_ext < @@ -10661,30 +10578,25 @@ int main() { return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ; return 0; } EOF -if { (eval echo configure:10665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:10582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding GTK or finding the wrong" - echo "*** version of GTK. If it is not finding GTK, you'll need to set your" + echo "*** that the run-time linker is not finding GTK+ or finding the wrong" + echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" - echo "***" + echo "***" echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" - echo "***" - echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" - echo "*** came with the system with the command" - echo "***" - echo "*** rpm --erase --nodeps gtk gtk-devel" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means GTK was incorrectly installed" - echo "*** or that you have moved GTK since it was installed. In the latter case, you" - echo "*** may want to edit the gtk-config-2.0 script: $GTK_CONFIG_2_0" + echo "*** exact error that occured. This usually means GTK+ was incorrectly installed" + echo "*** or that you have moved GTK+ since it was installed. In the latter case, you" + echo "*** may want to edit the pkg-config script: $PKG_CONFIG" fi rm -f conftest* CFLAGS="$ac_save_CFLAGS" @@ -10752,7 +10664,7 @@ fi # Extract the first word of "gtk-config", so it can be a program name with args. set dummy gtk-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:10756: checking for $ac_word" >&5 +echo "configure:10668: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -10787,7 +10699,7 @@ fi min_gtk_version=1.2.7 echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6 -echo "configure:10791: checking for GTK - version >= $min_gtk_version" >&5 +echo "configure:10703: checking for GTK - version >= $min_gtk_version" >&5 no_gtk="" if test "$GTK_CONFIG" = "no" ; then no_gtk=yes @@ -10810,7 +10722,7 @@ echo "configure:10791: checking for GTK - version >= $min_gtk_version" >&5 echo $ac_n "cross compiling; assumed OK... $ac_c" else cat > conftest.$ac_ext < @@ -10888,7 +10800,7 @@ main () } EOF -if { (eval echo configure:10892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:10804: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -10922,7 +10834,7 @@ fi CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" cat > conftest.$ac_ext < @@ -10932,7 +10844,7 @@ int main() { return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ; return 0; } EOF -if { (eval echo configure:10936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:10848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK or finding the wrong" @@ -11023,7 +10935,7 @@ fi # Extract the first word of "gtk-config", so it can be a program name with args. set dummy gtk-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:11027: checking for $ac_word" >&5 +echo "configure:10939: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -11058,7 +10970,7 @@ fi min_gtk_version=1.2.3 echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6 -echo "configure:11062: checking for GTK - version >= $min_gtk_version" >&5 +echo "configure:10974: checking for GTK - version >= $min_gtk_version" >&5 no_gtk="" if test "$GTK_CONFIG" = "no" ; then no_gtk=yes @@ -11081,7 +10993,7 @@ echo "configure:11062: checking for GTK - version >= $min_gtk_version" >&5 echo $ac_n "cross compiling; assumed OK... $ac_c" else cat > conftest.$ac_ext < @@ -11159,7 +11071,7 @@ main () } EOF -if { (eval echo configure:11163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:11075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -11193,7 +11105,7 @@ fi CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" cat > conftest.$ac_ext < @@ -11203,7 +11115,7 @@ int main() { return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ; return 0; } EOF -if { (eval echo configure:11207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:11119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK or finding the wrong" @@ -11283,7 +11195,7 @@ equivalent variable and GTK+ is version 1.2.3 or above. GUIDIST=GTK_DIST echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6 -echo "configure:11287: checking for gdk_im_open in -lgdk" >&5 +echo "configure:11199: checking for gdk_im_open in -lgdk" >&5 ac_lib_var=`echo gdk'_'gdk_im_open | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -11291,7 +11203,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lgdk $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:11218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -11329,7 +11241,7 @@ fi if test "$wxUSE_MGL" = 1; then echo $ac_n "checking for SciTech MGL library""... $ac_c" 1>&6 -echo "configure:11333: checking for SciTech MGL library" >&5 +echo "configure:11245: checking for SciTech MGL library" >&5 if test "x$MGL_ROOT" = x ; then echo "$ac_t""not found" 1>&6 { echo "configure: error: Cannot find MGL library. Make sure MGL_ROOT is set." 1>&2; exit 1; } @@ -11375,7 +11287,7 @@ echo "configure:11333: checking for SciTech MGL library" >&5 if test "$wxUSE_MICROWIN" = 1; then echo $ac_n "checking for MicroWindows""... $ac_c" 1>&6 -echo "configure:11379: checking for MicroWindows" >&5 +echo "configure:11291: checking for MicroWindows" >&5 if test "x$MICROWINDOWS" = x ; then echo "$ac_t""not found" 1>&6 { echo "configure: error: Cannot find MicroWindows library. Make sure MICROWINDOWS is set." 1>&2; exit 1; } @@ -11399,108 +11311,13 @@ echo "configure:11379: checking for MicroWindows" >&5 TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXUNIVERSAL__ -D__WXMSW__ -D__WIN95__ -D__WIN32__ -DMWIN -DMICROWIN_NOCONTROLS -DMICROWIN_TODO=1" fi - if test "$wxUSE_WINE" = 1; then - ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for windows.h""... $ac_c" 1>&6 -echo "configure:11406: checking for windows.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:11416: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 - - { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; } - -fi - - - xpm_link= - echo $ac_n "checking for Xpm library""... $ac_c" 1>&6 -echo "configure:11443: checking for Xpm library" >&5 - -ac_find_libraries= -for ac_dir in $SEARCH_LIB; - do - for ac_extension in a so sl dylib; do - if test -f "$ac_dir/libXpm.$ac_extension"; then - ac_find_libraries=$ac_dir - break 2 - fi - done - done - - if test "$ac_find_libraries" != "" ; then - GUI_TK_LIBRARY="-L$ac_find_libraries" - xpm_link=" -lXpm" - cat >> confdefs.h <<\EOF -#define wxHAVE_LIB_XPM 1 -EOF - - echo "$ac_t""found at $ac_find_libraries" 1>&6 - else - echo "$ac_t""no" 1>&6 - echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2 - fi - - mesa_link= - echo $ac_n "checking for Mesa library""... $ac_c" 1>&6 -echo "configure:11471: checking for Mesa library" >&5 - -ac_find_libraries= -for ac_dir in $SEARCH_LIB; - do - for ac_extension in a so sl dylib; do - if test -f "$ac_dir/libMesaGL.$ac_extension"; then - ac_find_libraries=$ac_dir - break 2 - fi - done - done - - if test "$ac_find_libraries" != "" ; then - GUI_TK_LIBRARY="$GUI_TK_LIBRARY -L$ac_find_libraries" - mesa_link=" -lMesaGL" - echo "$ac_t""found at $ac_find_libraries" 1>&6 - else - { echo "configure: error: no" 1>&2; exit 1; } - fi - - GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lwine$mesa_link$xpm_link -lXxf86dga -lXxf86vm -lSM -lICE -lXext -lXmu -lX11 -lncurses" - TOOLKIT=MSW - GUIDIST=MSW_DIST - TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXWINE__" - fi - - if test "$wxUSE_MOTIF" = 1; then + if test "$wxUSE_X11" = 1; then # If we find X, set shell vars x_includes and x_libraries to the # paths, otherwise set no_x=yes. # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:11504: checking for X" >&5 +echo "configure:11321: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then @@ -11562,12 +11379,12 @@ if test "$ac_x_includes" = NO; then # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:11571: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:11388: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -11636,14 +11453,14 @@ if test "$ac_x_libraries" = NO; then ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:11464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. @@ -11707,29 +11524,833 @@ if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then # Didn't find X anywhere. Cache the known absence of X. ac_cv_have_x="have_x=no" else - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" + # Record where we found X for the cache. + ac_cv_have_x="have_x=yes \ + ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" +fi +fi + fi + eval "$ac_cv_have_x" +fi # $with_x != no + +if test "$have_x" != yes; then + echo "$ac_t""$have_x" 1>&6 + no_x=yes +else + # If each of the values was on the command line, it overrides each guess. + test "x$x_includes" = xNONE && x_includes=$ac_x_includes + test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries + # Update the cache value to reflect the command line values. + ac_cv_have_x="have_x=yes \ + ac_x_includes=$x_includes ac_x_libraries=$x_libraries" + echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 +fi + +if test "$no_x" = yes; then + # Not all programs may use this symbol, but it does not hurt to define it. + cat >> confdefs.h <<\EOF +#define X_DISPLAY_MISSING 1 +EOF + + X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= +else + if test -n "$x_includes"; then + X_CFLAGS="$X_CFLAGS -I$x_includes" + fi + + # It would also be nice to do this for all -L options, not just this one. + if test -n "$x_libraries"; then + X_LIBS="$X_LIBS -L$x_libraries" + # For Solaris; some versions of Sun CC require a space after -R and + # others require no space. Words are not sufficient . . . . + case "`(uname -sr) 2>/dev/null`" in + "SunOS 5"*) + echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6 +echo "configure:11570: checking whether -R must be followed by a space" >&5 + ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries" + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_R_nospace=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_R_nospace=no +fi +rm -f conftest* + if test $ac_R_nospace = yes; then + echo "$ac_t""no" 1>&6 + X_LIBS="$X_LIBS -R$x_libraries" + else + LIBS="$ac_xsave_LIBS -R $x_libraries" + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_R_space=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_R_space=no +fi +rm -f conftest* + if test $ac_R_space = yes; then + echo "$ac_t""yes" 1>&6 + X_LIBS="$X_LIBS -R $x_libraries" + else + echo "$ac_t""neither works" 1>&6 + fi + fi + LIBS="$ac_xsave_LIBS" + esac + fi + + # Check for system-dependent libraries X programs must link with. + # Do this before checking for the system-independent R6 libraries + # (-lICE), since we may need -lsocket or whatever for X linking. + + if test "$ISC" = yes; then + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" + else + # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X + # libraries were built with DECnet support. And karl@cs.umb.edu says + # the Alpha needs dnet_stub (dnet does not exist). + echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6 +echo "configure:11635: checking for dnet_ntoa in -ldnet" >&5 +ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldnet $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 +echo "configure:11676: checking for dnet_ntoa in -ldnet_stub" >&5 +ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldnet_stub $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" +else + echo "$ac_t""no" 1>&6 +fi + + fi + + # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, + # to get the SysV transport functions. + # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4) + # needs -lnsl. + # The nsl library prevents programs from opening the X display + # on Irix 5.2, according to dickey@clark.net. + echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 +echo "configure:11724: checking for gethostbyname" >&5 +if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) +choke me +#else +gethostbyname(); +#endif + +; return 0; } +EOF +if { (eval echo configure:11752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_gethostbyname=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_gethostbyname=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_func_gethostbyname = no; then + echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 +echo "configure:11773: checking for gethostbyname in -lnsl" >&5 +ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lnsl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" +else + echo "$ac_t""no" 1>&6 +fi + + fi + + # lieder@skyler.mavd.honeywell.com says without -lsocket, + # socket/setsockopt and other routines are undefined under SCO ODT + # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary + # on later versions), says simon@lia.di.epfl.ch: it contains + # gethostby* variants that don't use the nameserver (or something). + # -lsocket must be given before -lnsl if both are needed. + # We assume that if connect needs -lnsl, so does gethostbyname. + echo $ac_n "checking for connect""... $ac_c" 1>&6 +echo "configure:11822: checking for connect" >&5 +if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char connect(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_connect) || defined (__stub___connect) +choke me +#else +connect(); +#endif + +; return 0; } +EOF +if { (eval echo configure:11850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_connect=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_connect=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_func_connect = no; then + echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 +echo "configure:11871: checking for connect in -lsocket" >&5 +ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lsocket $X_EXTRA_LIBS $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" +else + echo "$ac_t""no" 1>&6 +fi + + fi + + # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX. + echo $ac_n "checking for remove""... $ac_c" 1>&6 +echo "configure:11914: checking for remove" >&5 +if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char remove(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_remove) || defined (__stub___remove) +choke me +#else +remove(); +#endif + +; return 0; } +EOF +if { (eval echo configure:11942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_remove=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_remove=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_func_remove = no; then + echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 +echo "configure:11963: checking for remove in -lposix" >&5 +ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lposix $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" +else + echo "$ac_t""no" 1>&6 +fi + + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + echo $ac_n "checking for shmat""... $ac_c" 1>&6 +echo "configure:12006: checking for shmat" >&5 +if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shmat(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_shmat) || defined (__stub___shmat) +choke me +#else +shmat(); +#endif + +; return 0; } +EOF +if { (eval echo configure:12034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_shmat=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_shmat=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : +else + echo "$ac_t""no" 1>&6 +fi + + if test $ac_cv_func_shmat = no; then + echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 +echo "configure:12055: checking for shmat in -lipc" >&5 +ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lipc $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" +else + echo "$ac_t""no" 1>&6 +fi + + fi + fi + + # Check for libraries that X11R6 Xt/Xaw programs need. + ac_save_LDFLAGS="$LDFLAGS" + test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" + # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to + # check for ICE first), but we must link in the order -lSM -lICE or + # we get undefined symbols. So assume we have SM if we have ICE. + # These have to be linked with before -lX11, unlike the other + # libraries we check for below, so use a different variable. + # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. + echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 +echo "configure:12107: checking for IceConnectionNumber in -lICE" >&5 +ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lICE $X_EXTRA_LIBS $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" +else + echo "$ac_t""no" 1>&6 +fi + + LDFLAGS="$ac_save_LDFLAGS" + +fi + + + if test "$no_x" = "yes"; then + { echo "configure: error: X11 not found" 1>&2; exit 1; } + fi + + GUI_TK_LIBRARY="$X_LIBS" + TOOLKIT_INCLUDE="$X_CFLAGS" + AFMINSTALL=afminstall + COMPILED_X_PROGRAM=0 + + if test "$wxUSE_NANOX" = "yes"; then + echo $ac_n "checking for MicroWindows/NanoX distribution""... $ac_c" 1>&6 +echo "configure:12162: checking for MicroWindows/NanoX distribution" >&5 + if test "x$MICROWIN" = x ; then + echo "$ac_t""not found" 1>&6 + { echo "configure: error: Cannot find MicroWindows library. Make sure MICROWIN is set." 1>&2; exit 1; } + else + echo "$ac_t""$MICROWIN" 1>&6 + cat >> confdefs.h <<\EOF +#define wxUSE_NANOX 1 +EOF + + fi + fi + + xpm_link= + echo $ac_n "checking for Xpm library""... $ac_c" 1>&6 +echo "configure:12177: checking for Xpm library" >&5 + +ac_find_libraries= +for ac_dir in $SEARCH_LIB; + do + for ac_extension in a so sl dylib; do + if test -f "$ac_dir/libXpm.$ac_extension"; then + ac_find_libraries=$ac_dir + break 2 + fi + done + done + + if test "$ac_find_libraries" != "" ; then + + echo "$GUI_TK_LIBRARY" | grep "\-L$ac_find_libraries" > /dev/null + result=$? + if test $result = 0; then + ac_path_to_link="" + else + ac_path_to_link=" -L$ac_find_libraries" + fi + + GUI_TK_LIBRARY="$GUI_TK_LIBRARY$ac_path_to_link" + xpm_link=" -lXpm" + cat >> confdefs.h <<\EOF +#define wxHAVE_LIB_XPM 1 +EOF + + echo "$ac_t""found at $ac_find_libraries" 1>&6 + else + cat > conftest.$ac_ext < + +int main() { + + int version; + version = XpmLibraryVersion(); + +; return 0; } +EOF +if { (eval echo configure:12221: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + + xpm_link=" -lXpm" + cat >> confdefs.h <<\EOF +#define wxHAVE_LIB_XPM 1 +EOF + + echo "$ac_t""found in default search path" 1>&6 + COMPILED_X_PROGRAM=0 + +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + + echo "$ac_t""no" 1>&6 + echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2 + + +fi +rm -f conftest* + fi + + if test "$wxUSE_NANOX" = "yes"; then + TOOLKIT_INCLUDE="-I\$(top_srcdir)/include/wx/x11/nanox -I\$(MICROWIN)/src/include $TOOLKIT_INCLUDE" + TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__NANOX__ -DMWPIXEL_FORMAT=MWPF_TRUECOLOR0888 -DHAVE_FILEIO -DHAVE_BMP_SUPPORT=1 -DHAVE_GIF_SUPPORT=1 -DHAVE_PNM_SUPPORT=1 -DHAVE_XPM_SUPPORT=1 -DLINUX=1 -DUNIX=1 -DUSE_EXPOSURE -DSCREEN_HEIGHT=480 -DSCREEN_WIDTH=640 -DSCREEN_DEPTH=4 -DX11=1" + GUI_TK_LIBRARY="$GUI_TK_LIBRARY \$(MICROWIN)/src/lib/libnano-X.a" + else + GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lX11$xpm_link" + fi + + TOOLKIT_VPATH="\${top_srcdir}/src/x11" + TOOLKIT=X11 + GUIDIST=X11_DIST + fi + + if test "$wxUSE_WINE" = 1; then + ac_safe=`echo "windows.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for windows.h""... $ac_c" 1>&6 +echo "configure:12261: checking for windows.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:12271: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" fi +rm -f conftest* fi - fi - eval "$ac_cv_have_x" -fi # $with_x != no - -if test "$have_x" != yes; then - echo "$ac_t""$have_x" 1>&6 - no_x=yes +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + : else - # If each of the values was on the command line, it overrides each guess. - test "x$x_includes" = xNONE && x_includes=$ac_x_includes - test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries - # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 + echo "$ac_t""no" 1>&6 + + { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; } + fi -if test "$no_x" = yes; then + + xpm_link= + echo $ac_n "checking for Xpm library""... $ac_c" 1>&6 +echo "configure:12298: checking for Xpm library" >&5 + +ac_find_libraries= +for ac_dir in $SEARCH_LIB; + do + for ac_extension in a so sl dylib; do + if test -f "$ac_dir/libXpm.$ac_extension"; then + ac_find_libraries=$ac_dir + break 2 + fi + done + done + + if test "$ac_find_libraries" != "" ; then + GUI_TK_LIBRARY="-L$ac_find_libraries" + xpm_link=" -lXpm" + cat >> confdefs.h <<\EOF +#define wxHAVE_LIB_XPM 1 +EOF + + echo "$ac_t""found at $ac_find_libraries" 1>&6 + else + echo "$ac_t""no" 1>&6 + echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2 + fi + + mesa_link= + echo $ac_n "checking for Mesa library""... $ac_c" 1>&6 +echo "configure:12326: checking for Mesa library" >&5 + +ac_find_libraries= +for ac_dir in $SEARCH_LIB; + do + for ac_extension in a so sl dylib; do + if test -f "$ac_dir/libMesaGL.$ac_extension"; then + ac_find_libraries=$ac_dir + break 2 + fi + done + done + + if test "$ac_find_libraries" != "" ; then + GUI_TK_LIBRARY="$GUI_TK_LIBRARY -L$ac_find_libraries" + mesa_link=" -lMesaGL" + echo "$ac_t""found at $ac_find_libraries" 1>&6 + else + { echo "configure: error: no" 1>&2; exit 1; } + fi + + GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lwine$mesa_link$xpm_link -lXxf86dga -lXxf86vm -lSM -lICE -lXext -lXmu -lX11 -lncurses" + TOOLKIT=MSW + GUIDIST=MSW_DIST + TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXWINE__" + fi + + if test "$wxUSE_MOTIF" = 1; then + if test "$no_x" = yes; then # Not all programs may use this symbol, but it does not hurt to define it. cat >> confdefs.h <<\EOF #define X_DISPLAY_MISSING 1 @@ -11749,17 +12370,17 @@ else case "`(uname -sr) 2>/dev/null`" in "SunOS 5"*) echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6 -echo "configure:11753: checking whether -R must be followed by a space" >&5 +echo "configure:12374: checking whether -R must be followed by a space" >&5 ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_R_nospace=yes else @@ -11775,14 +12396,14 @@ rm -f conftest* else LIBS="$ac_xsave_LIBS -R $x_libraries" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_R_space=yes else @@ -11814,7 +12435,7 @@ rm -f conftest* # libraries were built with DECnet support. And karl@cs.umb.edu says # the Alpha needs dnet_stub (dnet does not exist). echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6 -echo "configure:11818: checking for dnet_ntoa in -ldnet" >&5 +echo "configure:12439: checking for dnet_ntoa in -ldnet" >&5 ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -11822,7 +12443,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ldnet $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12458: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -11855,7 +12476,7 @@ fi if test $ac_cv_lib_dnet_dnet_ntoa = no; then echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 -echo "configure:11859: checking for dnet_ntoa in -ldnet_stub" >&5 +echo "configure:12480: checking for dnet_ntoa in -ldnet_stub" >&5 ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -11863,7 +12484,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ldnet_stub $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -11903,12 +12524,12 @@ fi # The nsl library prevents programs from opening the X display # on Irix 5.2, according to dickey@clark.net. echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 -echo "configure:11907: checking for gethostbyname" >&5 +echo "configure:12528: checking for gethostbyname" >&5 if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_gethostbyname=yes" else @@ -11952,7 +12573,7 @@ fi if test $ac_cv_func_gethostbyname = no; then echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:11956: checking for gethostbyname in -lnsl" >&5 +echo "configure:12577: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -11960,7 +12581,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -12001,12 +12622,12 @@ fi # -lsocket must be given before -lnsl if both are needed. # We assume that if connect needs -lnsl, so does gethostbyname. echo $ac_n "checking for connect""... $ac_c" 1>&6 -echo "configure:12005: checking for connect" >&5 +echo "configure:12626: checking for connect" >&5 if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_connect=yes" else @@ -12050,7 +12671,7 @@ fi if test $ac_cv_func_connect = no; then echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 -echo "configure:12054: checking for connect in -lsocket" >&5 +echo "configure:12675: checking for connect in -lsocket" >&5 ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -12058,7 +12679,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -12093,12 +12714,12 @@ fi # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX. echo $ac_n "checking for remove""... $ac_c" 1>&6 -echo "configure:12097: checking for remove" >&5 +echo "configure:12718: checking for remove" >&5 if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_remove=yes" else @@ -12142,7 +12763,7 @@ fi if test $ac_cv_func_remove = no; then echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 -echo "configure:12146: checking for remove in -lposix" >&5 +echo "configure:12767: checking for remove in -lposix" >&5 ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -12150,7 +12771,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lposix $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -12185,12 +12806,12 @@ fi # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. echo $ac_n "checking for shmat""... $ac_c" 1>&6 -echo "configure:12189: checking for shmat" >&5 +echo "configure:12810: checking for shmat" >&5 if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12838: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_shmat=yes" else @@ -12234,7 +12855,7 @@ fi if test $ac_cv_func_shmat = no; then echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 -echo "configure:12238: checking for shmat in -lipc" >&5 +echo "configure:12859: checking for shmat in -lipc" >&5 ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -12242,7 +12863,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lipc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -12286,7 +12907,7 @@ fi # libraries we check for below, so use a different variable. # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 -echo "configure:12290: checking for IceConnectionNumber in -lICE" >&5 +echo "configure:12911: checking for IceConnectionNumber in -lICE" >&5 ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -12294,7 +12915,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lICE $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:12930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -12340,7 +12961,7 @@ fi COMPILED_X_PROGRAM=0 echo $ac_n "checking for Motif/Lesstif headers""... $ac_c" 1>&6 -echo "configure:12344: checking for Motif/Lesstif headers" >&5 +echo "configure:12965: checking for Motif/Lesstif headers" >&5 ac_find_includes= for ac_dir in $SEARCH_INCLUDE; @@ -12355,7 +12976,7 @@ for ac_dir in $SEARCH_INCLUDE; echo "$ac_t""found $ac_find_includes" 1>&6 else cat > conftest.$ac_ext < @@ -12367,7 +12988,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:12371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:12992: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""found in default search path" 1>&6 @@ -12388,7 +13009,7 @@ rm -f conftest* if test "$COMPILED_X_PROGRAM" = 0; then echo $ac_n "checking for Motif/Lesstif library""... $ac_c" 1>&6 -echo "configure:12392: checking for Motif/Lesstif library" >&5 +echo "configure:13013: checking for Motif/Lesstif library" >&5 ac_find_libraries= for ac_dir in $SEARCH_LIB; @@ -12427,7 +13048,7 @@ for ac_dir in $SEARCH_LIB; echo "$ac_t""found at $ac_find_libraries" 1>&6 else cat > conftest.$ac_ext < @@ -12439,7 +13060,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:12443: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:13064: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* echo "$ac_t""found in default search path" 1>&6 @@ -12461,7 +13082,7 @@ rm -f conftest* xpm_link= echo $ac_n "checking for Xpm library""... $ac_c" 1>&6 -echo "configure:12465: checking for Xpm library" >&5 +echo "configure:13086: checking for Xpm library" >&5 ac_find_libraries= for ac_dir in $SEARCH_LIB; @@ -12493,7 +13114,7 @@ EOF echo "$ac_t""found at $ac_find_libraries" 1>&6 else cat > conftest.$ac_ext < @@ -12505,7 +13126,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:12509: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:13130: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* xpm_link=" -lXpm" @@ -12563,12 +13184,18 @@ rm -f conftest* if test "$wxUSE_UNIVERSAL" = "yes"; then ALL_OBJECTS="\$(GUI_LOWLEVEL_OBJS) \${UNIVOBJS}" + + ALL_SOURCES="\$(ALL_SOURCES) \${UNIV_SOURCES}" + ALL_HEADERS="\$(ALL_HEADERS) \${UNIV_HEADERS}" + PORT_FILES="${PORT_FILES} \${top_srcdir}/src/univ/files.lst" TOOLKIT_VPATH="\${top_srcdir}/src/univ${PATH_IFS}\${top_srcdir}/src/univ/themes${PATH_IFS}\${top_srcdir}/src/${TOOLKIT_DIR}" TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXUNIVERSAL__" WIDGET_SET=univ else ALL_OBJECTS="\$(GUIOBJS)" + ALL_SOURCES="\$(ALL_SOURCES)" + ALL_HEADERS="\$(ALL_HEADERS)" fi ALL_OBJECTS="${ALL_OBJECTS} \$(COMMONOBJS) \$(GENERICOBJS)" @@ -12581,9 +13208,6 @@ rm -f conftest* ALL_OBJECTS="${ALL_OBJECTS} \$(HTMLOBJS)" fi - if test "$TOOLKIT" != "MSW" -a "$wxUSE_ODBC" = "yes" ; then - ALL_OBJECTS="${ALL_OBJECTS} \$(IODBCOBJS)" - fi if test "$wxUSE_LIBJPEG" = "builtin" ; then ALL_OBJECTS="${ALL_OBJECTS} \$(JPEGOBJS)" fi @@ -12593,9 +13217,6 @@ rm -f conftest* if test "$wxUSE_LIBPNG" = "builtin" ; then ALL_OBJECTS="${ALL_OBJECTS} \$(PNGOBJS)" fi - if test "$wxUSE_FREETYPE" = "builtin" ; then - ALL_OBJECTS="${ALL_OBJECTS} \$(FREETYPEOBJS)" - fi GUIDIST="${GUIDIST} SAMPLES_DIST DEMOS_DIST UTILS_DIST MISC_DIST" DISTDIR="wx\$(TOOLKIT)" @@ -12614,12 +13235,20 @@ else TOOLKIT_VPATH="\${top_srcdir}/src/unix" fi + ALL_SOURCES="\$(ALL_SOURCES)" + ALL_HEADERS="\$(ALL_HEADERS)" + PORT_FILES="\${top_srcdir}/src/files.lst" GUIDIST="BASE_DIST" DISTDIR="wxBase" fi + +if test "$TOOLKIT" != "MSW" -a "$wxUSE_ODBC" = "yes" ; then + ALL_OBJECTS="${ALL_OBJECTS} \$(IODBCOBJS)" +fi + if test "$wxUSE_REGEX" = "builtin" ; then ALL_OBJECTS="${ALL_OBJECTS} \$(REGEXOBJS)" fi @@ -12634,17 +13263,17 @@ if test "$wxUSE_OPENGL" = "yes"; then ac_safe=`echo "GL/gl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for GL/gl.h""... $ac_c" 1>&6 -echo "configure:12638: checking for GL/gl.h" >&5 +echo "configure:13267: checking for GL/gl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:12648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:13277: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -12662,7 +13291,7 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for -lGL""... $ac_c" 1>&6 -echo "configure:12666: checking for -lGL" >&5 +echo "configure:13295: checking for -lGL" >&5 ac_find_libraries= for ac_dir in $SEARCH_LIB; @@ -12695,7 +13324,7 @@ for ac_dir in $SEARCH_LIB; else echo "$ac_t""no" 1>&6 echo $ac_n "checking for -lMesaGL""... $ac_c" 1>&6 -echo "configure:12699: checking for -lMesaGL" >&5 +echo "configure:13328: checking for -lMesaGL" >&5 ac_find_libraries= for ac_dir in $SEARCH_LIB; @@ -12837,6 +13466,16 @@ fi +if test "$wxUSE_SHARED" = "yes"; then + case "${host}" in + *-pc-os2_emx | *-pc-os2-emx | \ + *-pc-msdosdjgpp ) + wxUSE_SHARED=no + echo "configure: warning: Host system doesn't support shared libraries, disabling" 1>&2 + ;; + esac +fi + if test "$wxUSE_SHARED" = "yes"; then if test "$wxUSE_OPENGL" = "yes"; then @@ -12875,13 +13514,13 @@ if test "$wxUSE_SHARED" = "yes"; then *-*-linux* ) if test "$GCC" != "yes"; then echo $ac_n "checking for Intel compiler""... $ac_c" 1>&6 -echo "configure:12879: checking for Intel compiler" >&5 +echo "configure:13518: checking for Intel compiler" >&5 if eval "test \"`echo '$''{'wx_cv_prog_icc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:13535: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_prog_icc=yes else @@ -12931,10 +13570,12 @@ echo "$ac_t""$wx_cv_prog_icc" 1>&6 ;; *-*-darwin* ) - CFLAGS="$CFLAGS -fno-common -DDYLIB_INIT" + CFLAGS="$CFLAGS -fno-common -DDYLIB_INIT" CXXFLAGS="$CXXFLAGS -fno-common -DDYLIB_INIT" SHARED_LD="$CXX -dynamiclib -init _wxWindowsDylibInit -o" PIC_FLAG="-dynamic -fPIC" + SONAME_FLAGS="-compatibility_version ${WX_RELEASE} -current_version ${WX_VERSION}" + SONAME_FLAGS_GL=${SONAME_FLAGS} ;; *-*-aix* ) @@ -12958,10 +13599,6 @@ echo "$ac_t""$wx_cv_prog_icc" 1>&6 fi ;; - *-pc-os2_emx | *-pc-os2-emx ) - wxUSE_SHARED=no - ;; - *-*-beos* ) SHARED_LD="${LD} -shared -o" ;; @@ -13017,7 +13654,7 @@ if test "$wxUSE_MAC" = 1; then # Extract the first word of "Rez", so it can be a program name with args. set dummy Rez; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:13021: checking for $ac_word" >&5 +echo "configure:13658: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RESCOMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -13047,7 +13684,7 @@ fi # Extract the first word of "DeRez", so it can be a program name with args. set dummy DeRez; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:13051: checking for $ac_word" >&5 +echo "configure:13688: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DEREZ'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -13074,9 +13711,14 @@ else echo "$ac_t""no" 1>&6 fi + MACOSX_BUNDLE="bundle" LIBWXMACRES="\$(top_builddir)/lib/lib${WX_LIBRARY}.r" LIBWXMACRESCOMP="\$(RESCOMP) Carbon.r -t APPL ${LIBWXMACRES} -o \$(BIN_PROGRAM)" LIBWXMACRESWXCONFIG="${RESCOMP} Carbon.r -t APPL \${prefix}/lib/${WX_RESOURCES_MACOSX_COMPILED} -o" +else + if test "$wxUSE_PM" = 1; then + LIBWXMACRESCOMP="emxbind -ep \$(BIN_PROGRAM)" + fi fi @@ -13085,17 +13727,17 @@ if test "$wxUSE_MAC" != 1; then do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13089: checking for $ac_hdr" >&5 +echo "configure:13731: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:13741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13127,17 +13769,17 @@ for ac_hdr in stdlib.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13131: checking for $ac_hdr" >&5 +echo "configure:13773: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13141: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:13783: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13167,17 +13809,17 @@ for ac_hdr in malloc.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13171: checking for $ac_hdr" >&5 +echo "configure:13813: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:13823: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13207,17 +13849,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13211: checking for $ac_hdr" >&5 +echo "configure:13853: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13221: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:13863: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13247,17 +13889,17 @@ for ac_hdr in wchar.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13251: checking for $ac_hdr" >&5 +echo "configure:13893: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13261: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:13903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13283,21 +13925,23 @@ else fi done -for ac_hdr in wcstr.h + +if test "$ac_cv_header_wchar_h" != "yes"; then + for ac_hdr in wcstr.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13291: checking for $ac_hdr" >&5 +echo "configure:13935: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13301: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:13945: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13323,61 +13967,24 @@ else fi done -for ac_hdr in wctype.h -do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13331: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13341: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 fi -done + for ac_hdr in fnmatch.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13371: checking for $ac_hdr" >&5 +echo "configure:13978: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13381: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:13988: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13407,17 +14014,17 @@ for ac_hdr in langinfo.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13411: checking for $ac_hdr" >&5 +echo "configure:14018: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13421: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:14028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13450,17 +14057,17 @@ if test "$wxUSE_GUI" = "yes"; then do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:13454: checking for $ac_hdr" >&5 +echo "configure:14061: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13464: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:14071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13491,12 +14098,12 @@ fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:13495: checking for ANSI C header files" >&5 +echo "configure:14102: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -13504,7 +14111,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:13508: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:14115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -13521,7 +14128,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -13539,7 +14146,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -13560,7 +14167,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -13571,7 +14178,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:13575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:14182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -13595,12 +14202,12 @@ EOF fi echo $ac_n "checking for mode_t""... $ac_c" 1>&6 -echo "configure:13599: checking for mode_t" >&5 +echo "configure:14206: checking for mode_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -13628,12 +14235,12 @@ EOF fi echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:13632: checking for off_t" >&5 +echo "configure:14239: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -13661,12 +14268,12 @@ EOF fi echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -echo "configure:13665: checking for pid_t" >&5 +echo "configure:14272: checking for pid_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -13694,12 +14301,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:13698: checking for size_t" >&5 +echo "configure:14305: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -13727,12 +14334,12 @@ EOF fi echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:13731: checking for uid_t in sys/types.h" >&5 +echo "configure:14338: checking for uid_t in sys/types.h" >&5 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF @@ -13762,13 +14369,13 @@ fi echo $ac_n "checking for wchar_t""... $ac_c" 1>&6 -echo "configure:13766: checking for wchar_t" >&5 +echo "configure:14373: checking for wchar_t" >&5 if eval "test \"`echo '$''{'wx_cv_type_wchar_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:14400: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_type_wchar_t=yes else @@ -13821,12 +14428,12 @@ ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftes cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking if size_t is unsigned int""... $ac_c" 1>&6 -echo "configure:13825: checking if size_t is unsigned int" >&5 +echo "configure:14432: checking if size_t is unsigned int" >&5 if eval "test \"`echo '$''{'wx_cv_size_t_is_uint'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -13839,7 +14446,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:13843: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:14450: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_size_t_is_uint=no else @@ -13862,12 +14469,12 @@ EOF else echo $ac_n "checking if size_t is unsigned long""... $ac_c" 1>&6 -echo "configure:13866: checking if size_t is unsigned long" >&5 +echo "configure:14473: checking if size_t is unsigned long" >&5 if eval "test \"`echo '$''{'wx_cv_size_t_is_ulong'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -13880,7 +14487,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:13884: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:14491: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_size_t_is_ulong=no else @@ -13914,13 +14521,13 @@ cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking for pw_gecos in struct passwd""... $ac_c" 1>&6 -echo "configure:13918: checking for pw_gecos in struct passwd" >&5 +echo "configure:14525: checking for pw_gecos in struct passwd" >&5 if eval "test \"`echo '$''{'wx_cv_struct_pw_gecos'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -13931,7 +14538,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:13935: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:14542: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_struct_pw_gecos=yes @@ -13961,12 +14568,12 @@ fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:13965: checking for working const" >&5 +echo "configure:14572: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:14626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -14036,21 +14643,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:14040: checking for inline" >&5 +echo "configure:14647: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:14661: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -14077,7 +14684,7 @@ esac echo $ac_n "checking size of char""... $ac_c" 1>&6 -echo "configure:14081: checking size of char" >&5 +echo "configure:14688: checking size of char" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -14085,7 +14692,7 @@ else ac_cv_sizeof_char=1 else cat > conftest.$ac_ext < main() @@ -14096,7 +14703,7 @@ main() exit(0); } EOF -if { (eval echo configure:14100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:14707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_char=`cat conftestval` else @@ -14116,7 +14723,7 @@ EOF echo $ac_n "checking size of short""... $ac_c" 1>&6 -echo "configure:14120: checking size of short" >&5 +echo "configure:14727: checking size of short" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -14124,7 +14731,7 @@ else ac_cv_sizeof_short=2 else cat > conftest.$ac_ext < main() @@ -14135,7 +14742,7 @@ main() exit(0); } EOF -if { (eval echo configure:14139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:14746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_short=`cat conftestval` else @@ -14154,47 +14761,47 @@ cat >> confdefs.h <&6 -echo "configure:14159: checking size of int *" >&5 -if eval "test \"`echo '$''{'ac_cv_sizeof_int_p'+set}'`\" = set"; then +echo $ac_n "checking size of void *""... $ac_c" 1>&6 +echo "configure:14766: checking size of void *" >&5 +if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then - ac_cv_sizeof_int_p=4 + ac_cv_sizeof_void_p=4 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); - fprintf(f, "%d\n", sizeof(int *)); + fprintf(f, "%d\n", sizeof(void *)); exit(0); } EOF -if { (eval echo configure:14178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:14785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then - ac_cv_sizeof_int_p=`cat conftestval` + ac_cv_sizeof_void_p=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* - ac_cv_sizeof_int_p=0 + ac_cv_sizeof_void_p=0 fi rm -fr conftest* fi fi -echo "$ac_t""$ac_cv_sizeof_int_p" 1>&6 +echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6 cat >> confdefs.h <&6 -echo "configure:14198: checking size of int" >&5 +echo "configure:14805: checking size of int" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -14202,7 +14809,7 @@ else ac_cv_sizeof_int=4 else cat > conftest.$ac_ext < main() @@ -14213,7 +14820,7 @@ main() exit(0); } EOF -if { (eval echo configure:14217: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:14824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_int=`cat conftestval` else @@ -14233,7 +14840,7 @@ EOF echo $ac_n "checking size of long""... $ac_c" 1>&6 -echo "configure:14237: checking size of long" >&5 +echo "configure:14844: checking size of long" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -14241,7 +14848,7 @@ else ac_cv_sizeof_long=4 else cat > conftest.$ac_ext < main() @@ -14252,7 +14859,7 @@ main() exit(0); } EOF -if { (eval echo configure:14256: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:14863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_long=`cat conftestval` else @@ -14272,7 +14879,7 @@ EOF echo $ac_n "checking size of long long""... $ac_c" 1>&6 -echo "configure:14276: checking size of long long" >&5 +echo "configure:14883: checking size of long long" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -14280,7 +14887,7 @@ else ac_cv_sizeof_long_long=0 else cat > conftest.$ac_ext < main() @@ -14291,7 +14898,7 @@ main() exit(0); } EOF -if { (eval echo configure:14295: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:14902: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_long_long=`cat conftestval` else @@ -14312,7 +14919,7 @@ EOF echo $ac_n "checking size of wchar_t""... $ac_c" 1>&6 -echo "configure:14316: checking size of wchar_t" >&5 +echo "configure:14923: checking size of wchar_t" >&5 if eval "test \"`echo '$''{'wx_cv_sizeof_wchar_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -14322,7 +14929,7 @@ else else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:14955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then wx_cv_sizeof_wchar_t=`cat conftestval` else @@ -14367,14 +14974,14 @@ EOF echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:14371: checking whether byte ordering is bigendian" >&5 +echo "configure:14978: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include @@ -14385,11 +14992,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:14389: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:14996: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include @@ -14400,7 +15007,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:14404: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:15011: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -14420,7 +15027,7 @@ if test "$cross_compiling" = yes; then ac_cv_c_bigendian=unknown else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:15044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -14461,7 +15068,7 @@ fi echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6 -echo "configure:14465: checking how to run the C++ preprocessor" >&5 +echo "configure:15072: checking how to run the C++ preprocessor" >&5 if test -z "$CXXCPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -14474,12 +15081,12 @@ ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftes cross_compiling=$ac_cv_prog_cxx_cross CXXCPP="${CXX-g++} -E" cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:14483: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:15090: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -14523,17 +15130,17 @@ cross_compiling=$ac_cv_prog_cxx_cross do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:14527: checking for $ac_hdr" >&5 +echo "configure:15134: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:14537: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:15144: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -14581,7 +15188,7 @@ cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking if C++ compiler supports bool""... $ac_c" 1>&6 -echo "configure:14585: checking if C++ compiler supports bool" >&5 +echo "configure:15192: checking if C++ compiler supports bool" >&5 if eval "test \"`echo '$''{'wx_cv_cpp_bool'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -14596,7 +15203,7 @@ cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:15219: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_cpp_bool=yes @@ -14646,7 +15253,7 @@ EOF echo $ac_n "checking for wcslen in -lc""... $ac_c" 1>&6 -echo "configure:14650: checking for wcslen in -lc" >&5 +echo "configure:15257: checking for wcslen in -lc" >&5 ac_lib_var=`echo c'_'wcslen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -14654,7 +15261,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -14691,7 +15298,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for wcslen in -lw""... $ac_c" 1>&6 -echo "configure:14695: checking for wcslen in -lw" >&5 +echo "configure:15302: checking for wcslen in -lw" >&5 ac_lib_var=`echo w'_'wcslen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -14699,7 +15306,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lw $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -14736,7 +15343,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for wcslen in -lmsvcrt""... $ac_c" 1>&6 -echo "configure:14740: checking for wcslen in -lmsvcrt" >&5 +echo "configure:15347: checking for wcslen in -lmsvcrt" >&5 ac_lib_var=`echo msvcrt'_'wcslen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -14744,7 +15351,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lmsvcrt $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -14791,12 +15398,12 @@ fi for ac_func in wcsrtombs do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:14795: checking for $ac_func" >&5 +echo "configure:15402: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -14845,12 +15452,12 @@ done echo $ac_n "checking for vprintf""... $ac_c" 1>&6 -echo "configure:14849: checking for vprintf" >&5 +echo "configure:15456: checking for vprintf" >&5 if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_vprintf=yes" else @@ -14897,12 +15504,12 @@ fi if test "$ac_cv_func_vprintf" != yes; then echo $ac_n "checking for _doprnt""... $ac_c" 1>&6 -echo "configure:14901: checking for _doprnt" >&5 +echo "configure:15508: checking for _doprnt" >&5 if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func__doprnt=yes" else @@ -14955,13 +15562,13 @@ fi echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6 -echo "configure:14959: checking for vsnprintf" >&5 +echo "configure:15566: checking for vsnprintf" >&5 if eval "test \"`echo '$''{'wx_cv_func_vsnprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -14986,7 +15593,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:14990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* wx_cv_func_vsnprintf=yes @@ -14997,7 +15604,7 @@ else rm -rf conftest* cat > conftest.$ac_ext < @@ -15022,7 +15629,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:15026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* wx_cv_func_vsnprintf=yes @@ -15054,13 +15661,13 @@ else fi echo $ac_n "checking for vsscanf""... $ac_c" 1>&6 -echo "configure:15058: checking for vsscanf" >&5 +echo "configure:15665: checking for vsscanf" >&5 if eval "test \"`echo '$''{'wx_cv_func_vsscanf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -15083,7 +15690,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:15087: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:15694: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_func_vsscanf=yes @@ -15135,7 +15742,7 @@ fi echo $ac_n "checking for iconv""... $ac_c" 1>&6 -echo "configure:15139: checking for iconv" >&5 +echo "configure:15746: checking for iconv" >&5 if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -15143,7 +15750,7 @@ else am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no cat > conftest.$ac_ext < #include @@ -15153,7 +15760,7 @@ iconv_t cd = iconv_open("",""); iconv_close(cd); ; return 0; } EOF -if { (eval echo configure:15157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_func_iconv=yes else @@ -15165,7 +15772,7 @@ rm -f conftest* am_save_LIBS="$LIBS" LIBS="$LIBS -liconv" cat > conftest.$ac_ext < #include @@ -15175,7 +15782,7 @@ iconv_t cd = iconv_open("",""); iconv_close(cd); ; return 0; } EOF -if { (eval echo configure:15179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_lib_iconv=yes am_cv_func_iconv=yes @@ -15196,12 +15803,12 @@ echo "$ac_t""$am_cv_func_iconv" 1>&6 EOF echo $ac_n "checking if iconv needs const""... $ac_c" 1>&6 -echo "configure:15200: checking if iconv needs const" >&5 +echo "configure:15807: checking if iconv needs const" >&5 if eval "test \"`echo '$''{'wx_cv_func_iconv_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -15220,7 +15827,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:15224: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:15831: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_func_iconv_const="no" else @@ -15265,12 +15872,12 @@ if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes" -a "$wxUSE_UNIX" = "yes"; then for ac_func in sigaction do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15269: checking for $ac_func" >&5 +echo "configure:15876: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:15904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -15334,13 +15941,13 @@ cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking for sa_handler type""... $ac_c" 1>&6 -echo "configure:15338: checking for sa_handler type" >&5 +echo "configure:15945: checking for sa_handler type" >&5 if eval "test \"`echo '$''{'wx_cv_type_sa_handler'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -15352,7 +15959,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:15356: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:15963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_type_sa_handler=int @@ -15389,12 +15996,12 @@ fi for ac_func in vfork do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15393: checking for $ac_func" >&5 +echo "configure:16000: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16028: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -15445,12 +16052,12 @@ done for ac_func in mkstemp mktemp do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15449: checking for $ac_func" >&5 +echo "configure:16056: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -15499,12 +16106,12 @@ done echo $ac_n "checking for statfs""... $ac_c" 1>&6 -echo "configure:15503: checking for statfs" >&5 +echo "configure:16110: checking for statfs" >&5 if eval "test \"`echo '$''{'wx_cv_func_statfs'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:16136: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_func_statfs=yes @@ -15552,12 +16159,12 @@ EOF else echo $ac_n "checking for statvfs""... $ac_c" 1>&6 -echo "configure:15556: checking for statvfs" >&5 +echo "configure:16163: checking for statvfs" >&5 if eval "test \"`echo '$''{'wx_cv_func_statvfs'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -15573,7 +16180,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:15577: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:16184: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_func_statvfs=yes @@ -15607,12 +16214,12 @@ if test "$wxUSE_SNGLINST_CHECKER" = "yes"; then for ac_func in fcntl flock do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15611: checking for $ac_func" >&5 +echo "configure:16218: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -15669,12 +16276,12 @@ fi for ac_func in timegm do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15673: checking for $ac_func" >&5 +echo "configure:16280: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16308: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -15725,12 +16332,12 @@ done for ac_func in putenv setenv do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15729: checking for $ac_func" >&5 +echo "configure:16336: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -15800,12 +16407,12 @@ if test "$HAVE_SOME_SLEEP_FUNC" != 1; then for ac_func in nanosleep do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15804: checking for $ac_func" >&5 +echo "configure:16411: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -15853,7 +16460,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for nanosleep in -lposix4""... $ac_c" 1>&6 -echo "configure:15857: checking for nanosleep in -lposix4" >&5 +echo "configure:16464: checking for nanosleep in -lposix4" >&5 ac_lib_var=`echo posix4'_'nanosleep | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -15861,7 +16468,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lposix4 $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -15900,12 +16507,12 @@ else for ac_func in usleep do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15904: checking for $ac_func" >&5 +echo "configure:16511: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -15971,12 +16578,12 @@ fi for ac_func in uname gethostname do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:15975: checking for $ac_func" >&5 +echo "configure:16582: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -16036,12 +16643,12 @@ cross_compiling=$ac_cv_prog_cxx_cross for ac_func in strtok_r do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:16040: checking for $ac_func" >&5 +echo "configure:16647: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -16104,12 +16711,12 @@ INET_LINK= for ac_func in inet_addr do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:16108: checking for $ac_func" >&5 +echo "configure:16715: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -16157,7 +16764,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6 -echo "configure:16161: checking for inet_addr in -lnsl" >&5 +echo "configure:16768: checking for inet_addr in -lnsl" >&5 ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16165,7 +16772,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16195,7 +16802,7 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then else echo "$ac_t""no" 1>&6 echo $ac_n "checking for inet_addr in -lresolv""... $ac_c" 1>&6 -echo "configure:16199: checking for inet_addr in -lresolv" >&5 +echo "configure:16806: checking for inet_addr in -lresolv" >&5 ac_lib_var=`echo resolv'_'inet_addr | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16203,7 +16810,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lresolv $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16230,9 +16837,50 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 INET_LINK="resolv" - else echo "$ac_t""no" 1>&6 +echo $ac_n "checking for inet_addr in -lsocket""... $ac_c" 1>&6 +echo "configure:16844: checking for inet_addr in -lsocket" >&5 +ac_lib_var=`echo socket'_'inet_addr | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lsocket $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + INET_LINK="socket" + +else + echo "$ac_t""no" 1>&6 +fi + + fi @@ -16247,12 +16895,12 @@ done for ac_func in inet_aton do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:16251: checking for $ac_func" >&5 +echo "configure:16899: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -16300,7 +16948,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for inet_aton in -l$INET_LINK""... $ac_c" 1>&6 -echo "configure:16304: checking for inet_aton in -l$INET_LINK" >&5 +echo "configure:16952: checking for inet_aton in -l$INET_LINK" >&5 ac_lib_var=`echo $INET_LINK'_'inet_aton | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16308,7 +16956,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$INET_LINK $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:16971: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16434,7 +17082,7 @@ if test "$TOOLKIT" != "MSW"; then fi echo $ac_n "checking for pthread_create in -l$THREADS_LIB""... $ac_c" 1>&6 -echo "configure:16438: checking for pthread_create in -l$THREADS_LIB" >&5 +echo "configure:17086: checking for pthread_create in -l$THREADS_LIB" >&5 ac_lib_var=`echo $THREADS_LIB'_'pthread_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16442,7 +17090,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$THREADS_LIB $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16476,7 +17124,7 @@ else echo "$ac_t""no" 1>&6 echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6 -echo "configure:16480: checking for pthread_create in -lc_r" >&5 +echo "configure:17128: checking for pthread_create in -lc_r" >&5 ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16484,7 +17132,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lc_r $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16519,17 +17167,17 @@ else ac_safe=`echo "sys/prctl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for sys/prctl.h""... $ac_c" 1>&6 -echo "configure:16523: checking for sys/prctl.h" >&5 +echo "configure:17171: checking for sys/prctl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:16533: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:17181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -16569,12 +17217,12 @@ fi for ac_func in thr_setconcurrency do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:16573: checking for $ac_func" >&5 +echo "configure:17221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -16627,17 +17275,17 @@ done do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:16631: checking for $ac_hdr" >&5 +echo "configure:17279: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:16641: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:17289: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -16665,7 +17313,7 @@ done echo $ac_n "checking for sched_yield in -l$THREADS_LINK""... $ac_c" 1>&6 -echo "configure:16669: checking for sched_yield in -l$THREADS_LINK" >&5 +echo "configure:17317: checking for sched_yield in -l$THREADS_LINK" >&5 ac_lib_var=`echo $THREADS_LINK'_'sched_yield | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16673,7 +17321,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$THREADS_LINK $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17336: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16706,7 +17354,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6 -echo "configure:16710: checking for sched_yield in -lposix4" >&5 +echo "configure:17358: checking for sched_yield in -lposix4" >&5 ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16714,7 +17362,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lposix4 $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16756,7 +17404,7 @@ fi HAVE_PRIOR_FUNCS=0 echo $ac_n "checking for pthread_attr_getschedpolicy in -l$THREADS_LINK""... $ac_c" 1>&6 -echo "configure:16760: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5 +echo "configure:17408: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5 ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_getschedpolicy | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16764,7 +17412,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$THREADS_LINK $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16791,7 +17439,7 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for pthread_attr_setschedparam in -l$THREADS_LINK""... $ac_c" 1>&6 -echo "configure:16795: checking for pthread_attr_setschedparam in -l$THREADS_LINK" >&5 +echo "configure:17443: checking for pthread_attr_setschedparam in -l$THREADS_LINK" >&5 ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_setschedparam | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16799,7 +17447,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$THREADS_LINK $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16826,7 +17474,7 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for sched_get_priority_max in -l$THREADS_LINK""... $ac_c" 1>&6 -echo "configure:16830: checking for sched_get_priority_max in -l$THREADS_LINK" >&5 +echo "configure:17478: checking for sched_get_priority_max in -l$THREADS_LINK" >&5 ac_lib_var=`echo $THREADS_LINK'_'sched_get_priority_max | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16834,7 +17482,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$THREADS_LINK $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16864,7 +17512,7 @@ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then else echo "$ac_t""no" 1>&6 echo $ac_n "checking for sched_get_priority_max in -lposix4""... $ac_c" 1>&6 -echo "configure:16868: checking for sched_get_priority_max in -lposix4" >&5 +echo "configure:17516: checking for sched_get_priority_max in -lposix4" >&5 ac_lib_var=`echo posix4'_'sched_get_priority_max | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16872,7 +17520,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lposix4 $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16930,7 +17578,7 @@ EOF fi echo $ac_n "checking for pthread_cancel in -l$THREADS_LINK""... $ac_c" 1>&6 -echo "configure:16934: checking for pthread_cancel in -l$THREADS_LINK" >&5 +echo "configure:17582: checking for pthread_cancel in -l$THREADS_LINK" >&5 ac_lib_var=`echo $THREADS_LINK'_'pthread_cancel | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -16938,7 +17586,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$THREADS_LINK $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:17601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -16975,13 +17623,13 @@ fi echo $ac_n "checking for pthread_cleanup_push/pop""... $ac_c" 1>&6 -echo "configure:16979: checking for pthread_cleanup_push/pop" >&5 +echo "configure:17627: checking for pthread_cleanup_push/pop" >&5 if eval "test \"`echo '$''{'wx_cv_func_pthread_cleanup_push'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -16991,7 +17639,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:16995: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:17643: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_func_pthread_cleanup_push=yes @@ -17023,13 +17671,13 @@ EOF fi echo $ac_n "checking for pthread_mutexattr_t""... $ac_c" 1>&6 -echo "configure:17027: checking for pthread_mutexattr_t" >&5 +echo "configure:17675: checking for pthread_mutexattr_t" >&5 if eval "test \"`echo '$''{'wx_cv_type_pthread_mutexattr_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -17039,7 +17687,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:17043: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:17691: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_type_pthread_mutexattr_t=yes @@ -17066,13 +17714,13 @@ EOF else echo $ac_n "checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER""... $ac_c" 1>&6 -echo "configure:17070: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5 +echo "configure:17718: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5 if eval "test \"`echo '$''{'wx_cv_type_pthread_rec_mutex_init'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { @@ -17081,7 +17729,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:17085: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:17733: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_type_pthread_rec_mutex_init=yes @@ -17133,7 +17781,7 @@ EOF else if test "$ac_cv_func_strtok_r" = "yes"; then echo $ac_n "checking if -D_REENTRANT is needed""... $ac_c" 1>&6 -echo "configure:17137: checking if -D_REENTRANT is needed" >&5 +echo "configure:17785: checking if -D_REENTRANT is needed" >&5 if test "$NEEDS_D_REENTRANT_FOR_R_FUNCS" = 1; then TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D_REENTRANT" echo "$ac_t""yes" 1>&6 @@ -17259,7 +17907,7 @@ EOF WXWIN_COMPATIBILITY_2_2="yes" fi -if test "$WXWIN_COMPATIBILITY_2_2" = "yes"; then +if test "x$WXWIN_COMPATIBILITY_2_2" != "xno"; then cat >> confdefs.h <<\EOF #define WXWIN_COMPATIBILITY_2_2 1 EOF @@ -17513,12 +18161,12 @@ if test "$wxUSE_DATETIME" = "yes"; then for ac_func in strptime do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:17517: checking for $ac_func" >&5 +echo "configure:18165: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:18193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -17567,13 +18215,13 @@ done echo $ac_n "checking for timezone variable in ""... $ac_c" 1>&6 -echo "configure:17571: checking for timezone variable in " >&5 +echo "configure:18219: checking for timezone variable in " >&5 if eval "test \"`echo '$''{'wx_cv_var_timezone'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -17585,7 +18233,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:17589: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18237: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_var_timezone=timezone @@ -17596,7 +18244,7 @@ else rm -rf conftest* cat > conftest.$ac_ext < @@ -17608,7 +18256,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:17612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18260: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_var_timezone=_timezone @@ -17619,7 +18267,7 @@ else rm -rf conftest* cat > conftest.$ac_ext < @@ -17631,7 +18279,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:17635: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18283: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_var_timezone=__timezone @@ -17672,12 +18320,12 @@ EOF for ac_func in localtime do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:17676: checking for $ac_func" >&5 +echo "configure:18324: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:18352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -17727,13 +18375,13 @@ done if test "$ac_cv_func_localtime" = "yes"; then echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6 -echo "configure:17731: checking for tm_gmtoff in struct tm" >&5 +echo "configure:18379: checking for tm_gmtoff in struct tm" >&5 if eval "test \"`echo '$''{'wx_cv_struct_tm_has_gmtoff'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -17745,7 +18393,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:17749: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18397: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_struct_tm_has_gmtoff=yes @@ -17774,12 +18422,12 @@ EOF for ac_func in gettimeofday ftime do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:17778: checking for $ac_func" >&5 +echo "configure:18426: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:18454: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -17829,7 +18477,7 @@ done if test "$ac_cv_func_gettimeofday" = "yes"; then echo $ac_n "checking whether gettimeofday takes two arguments""... $ac_c" 1>&6 -echo "configure:17833: checking whether gettimeofday takes two arguments" >&5 +echo "configure:18481: checking whether gettimeofday takes two arguments" >&5 if eval "test \"`echo '$''{'wx_cv_func_gettimeofday_has_2_args'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -17844,7 +18492,7 @@ cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext < @@ -17857,7 +18505,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:17861: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18509: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_func_gettimeofday_has_2_args=yes else @@ -17865,7 +18513,7 @@ else cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < @@ -17878,7 +18526,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:17882: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18530: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_func_gettimeofday_has_2_args=no else @@ -17923,16 +18571,22 @@ EOF fi -if test "$TOOLKIT" != "MSW"; then +if test "$wxUSE_SOCKETS" = "yes"; then + if test "$TOOLKIT" = "X11"; then + echo "configure: warning: wxSocket not yet supported under X11... disabled" 1>&2 + wxUSE_SOCKETS="no" + fi +fi - if test "$wxUSE_SOCKETS" = "yes"; then +if test "$wxUSE_SOCKETS" = "yes"; then + if test "$TOOLKIT" != "MSW"; then echo $ac_n "checking for socket""... $ac_c" 1>&6 -echo "configure:17931: checking for socket" >&5 +echo "configure:18585: checking for socket" >&5 if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:18613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_socket=yes" else @@ -17973,7 +18627,7 @@ if eval "test \"`echo '$ac_cv_func_'socket`\" = yes"; then else echo "$ac_t""no" 1>&6 echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6 -echo "configure:17977: checking for socket in -lsocket" >&5 +echo "configure:18631: checking for socket in -lsocket" >&5 ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -17981,7 +18635,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:18650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -18007,7 +18661,9 @@ LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 - INET_LINK="$INET_LINK -lsocket" + if test "$INET_LINK" != " -lsocket"; then + INET_LINK="$INET_LINK -lsocket" + fi else echo "$ac_t""no" 1>&6 @@ -18021,11 +18677,12 @@ fi fi fi +fi - - if test "$wxUSE_SOCKETS" = "yes" ; then +if test "$wxUSE_SOCKETS" = "yes" ; then + if test "$TOOLKIT" != "MSW"; then echo $ac_n "checking what is the type of the third argument of getsockname""... $ac_c" 1>&6 -echo "configure:18029: checking what is the type of the third argument of getsockname" >&5 +echo "configure:18686: checking what is the type of the third argument of getsockname" >&5 if eval "test \"`echo '$''{'wx_cv_type_getsockname3'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -18040,7 +18697,7 @@ cross_compiling=$ac_cv_prog_cxx_cross cat > conftest.$ac_ext < @@ -18053,7 +18710,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:18057: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18714: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_type_getsockname3=socklen_t else @@ -18061,7 +18718,7 @@ else cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < @@ -18074,7 +18731,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:18078: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18735: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_type_getsockname3=size_t else @@ -18082,7 +18739,7 @@ else cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < @@ -18095,7 +18752,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:18099: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:18756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* wx_cv_type_getsockname3=int else @@ -18155,6 +18812,10 @@ if test "$wxUSE_GUI" = "yes"; then if test "$TOOLKIT" = "MOTIF"; then echo "configure: warning: Joystick not yet supported under Motif... disabled" 1>&2 wxUSE_JOYSTICK=no + fi + if test "$TOOLKIT" = "X11"; then + echo "configure: warning: Joystick not yet supported under X11... disabled" 1>&2 + wxUSE_JOYSTICK=no fi if test "$TOOLKIT" != "MSW"; then @@ -18163,17 +18824,17 @@ if test "$wxUSE_GUI" = "yes"; then do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:18167: checking for $ac_hdr" >&5 +echo "configure:18828: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:18177: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:18838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -18227,12 +18888,12 @@ if test "$TOOLKIT" != "MSW"; then for ac_func in dlopen do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:18231: checking for $ac_func" >&5 +echo "configure:18892: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:18920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -18283,7 +18944,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 -echo "configure:18287: checking for dlopen in -ldl" >&5 +echo "configure:18948: checking for dlopen in -ldl" >&5 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -18291,7 +18952,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:18967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -18331,12 +18992,12 @@ else for ac_func in shl_load do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:18335: checking for $ac_func" >&5 +echo "configure:18996: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:19024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -18387,7 +19048,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dld in -lshl_load""... $ac_c" 1>&6 -echo "configure:18391: checking for dld in -lshl_load" >&5 +echo "configure:19052: checking for dld in -lshl_load" >&5 ac_lib_var=`echo shl_load'_'dld | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -18395,7 +19056,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lshl_load $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:19071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -18445,12 +19106,12 @@ done for ac_func in dlerror do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:18449: checking for $ac_func" >&5 +echo "configure:19110: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:19138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -18498,7 +19159,7 @@ EOF else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlerror in -ldl""... $ac_c" 1>&6 -echo "configure:18502: checking for dlerror in -ldl" >&5 +echo "configure:19163: checking for dlerror in -ldl" >&5 ac_lib_var=`echo dl'_'dlerror | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -18506,7 +19167,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:19182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -18585,10 +19246,14 @@ if test "$wxUSE_UNICODE" = "yes" ; then #define wxUSE_UNICODE 1 EOF + + if test "$wxUSE_MSW" != 1; then + wxUSE_UNICODE_MSLU=no + fi if test "$wxUSE_MSW" = 1 -a "$wxUSE_UNICODE_MSLU" = "yes"; then echo $ac_n "checking for main in -lunicows""... $ac_c" 1>&6 -echo "configure:18592: checking for main in -lunicows" >&5 +echo "configure:19257: checking for main in -lunicows" >&5 ac_lib_var=`echo unicows'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -18596,14 +19261,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lunicows $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:19272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -18684,7 +19349,7 @@ fi if test "$wxUSE_MDI_ARCHITECTURE" = "yes"; then if test "$wxUSE_UNIVERSAL" = "yes"; then - echo "configure: warning: MDI not yet supported for wxUNIVERSAL... disabled" 1>&2 + echo "configure: warning: MDI not yet supported for wxUniversal... disabled" 1>&2 wxUSE_MDI_ARCHITECTURE=no fi @@ -18717,48 +19382,10 @@ EOF if test "$wxUSE_MSW" = 1; then if test "$wxUSE_MS_HTML_HELP" = "yes"; then - ac_safe=`echo "htmlhelp.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for htmlhelp.h""... $ac_c" 1>&6 -echo "configure:18723: checking for htmlhelp.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:18733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - - cat >> confdefs.h <<\EOF + cat >> confdefs.h <<\EOF #define wxUSE_MS_HTML_HELP 1 EOF - -else - echo "$ac_t""no" 1>&6 - - echo "configure: warning: MS HTML Help cannot be used without htmlhelp.h... disabled" 1>&2 - wxUSE_MS_HTML_HELP=no - -fi - fi fi @@ -18795,11 +19422,15 @@ EOF fi if test "$wxUSE_RESOURCES" = "yes" ; then - cat >> confdefs.h <<\EOF + if test "$wxUSE_NANOX" = "yes"; then + echo "configure: warning: Cannot use resource database functions in NanoX" 1>&2 + else + cat >> confdefs.h <<\EOF #define wxUSE_RESOURCES 1 EOF - SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS resource" + SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS resource" + fi fi if test "$wxUSE_X_RESOURCES" = "yes"; then @@ -18817,17 +19448,17 @@ if test "$wxUSE_MSW" = 1 -a \( "$wxUSE_DATAOBJ" = "yes" \ do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:18821: checking for $ac_hdr" >&5 +echo "configure:19452: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:18831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:19462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -18927,6 +19558,11 @@ if test "$wxUSE_DRAG_AND_DROP" = "yes" ; then wxUSE_DRAG_AND_DROP=no fi + if test "$wxUSE_X11" = 1; then + echo "configure: warning: Drag and drop not yet supported under X11... disabled" 1>&2 + wxUSE_DRAG_AND_DROP=no + fi + if test "$wxUSE_DRAG_AND_DROP" = "yes"; then cat >> confdefs.h <<\EOF #define wxUSE_DRAG_AND_DROP 1 @@ -19232,7 +19868,7 @@ if test "$wxUSE_TOGGLEBTN" = "yes"; then wxUSE_TOGGLEBTN=no fi if test "$wxUSE_UNIVERSAL" = "yes"; then - echo "configure: warning: Toggle button not yet supported under wxUNIVERSAL... disabled" 1>&2 + echo "configure: warning: Toggle button not yet supported under wxUniversal... disabled" 1>&2 wxUSE_TOGGLEBTN=no fi @@ -19284,7 +19920,7 @@ if test "$wxUSE_TOOLTIPS" = "yes"; then echo "configure: warning: wxTooltip not supported under WINE... disabled" 1>&2 else if test "$wxUSE_UNIVERSAL" = "yes"; then - echo "configure: warning: wxTooltip not supported yet in wxUNIVERSAL... disabled" 1>&2 + echo "configure: warning: wxTooltip not supported yet in wxUniversal... disabled" 1>&2 else cat >> confdefs.h <<\EOF #define wxUSE_TOOLTIPS 1 @@ -19315,21 +19951,29 @@ if test "$wxUSE_POPUPWIN" = "yes"; then if test "$wxUSE_MOTIF" = 1; then echo "configure: warning: wxPopupWindow not yet supported under Motif... disabled" 1>&2 else - cat >> confdefs.h <<\EOF + if test "$wxUSE_PM" = 1; then + echo "configure: warning: wxPopupWindow not yet supported under PM... disabled" 1>&2 + else + cat >> confdefs.h <<\EOF #define wxUSE_POPUPWIN 1 EOF - USES_CONTROLS=1 + USES_CONTROLS=1 + fi fi fi fi if test "$wxUSE_TIPWINDOW" = "yes"; then - cat >> confdefs.h <<\EOF + if test "$wxUSE_PM" = 1; then + echo "configure: warning: wxTipWindow not yet supported under PM... disabled" 1>&2 + else + cat >> confdefs.h <<\EOF #define wxUSE_TIPWINDOW 1 EOF + fi fi if test "$USES_CONTROLS" = 1; then @@ -19552,17 +20196,13 @@ EOF fi if test "$wxUSE_DIRDLG" = "yes"; then - if test "$wxUSE_CONSTRAINTS" != "yes"; then - echo "configure: warning: wxDirDialog requires constraints so it won't be compiled without them" 1>&2 + if test "$wxUSE_TREECTRL" != "yes"; then + echo "configure: warning: wxDirDialog requires wxTreeCtrl so it won't be compiled without it" 1>&2 else - if test "$wxUSE_TREECTRL" != "yes"; then - echo "configure: warning: wxDirDialog requires wxTreeCtrl so it won't be compiled without it" 1>&2 - else - cat >> confdefs.h <<\EOF + cat >> confdefs.h <<\EOF #define wxUSE_DIRDLG 1 EOF - fi fi fi @@ -19657,14 +20297,14 @@ if test "$wxUSE_MAC" = 1 ; then fi -LIBS="$ZLIB_LINK$POSIX4_LINK$INET_LINK$WCHAR_LINK$THREADS_LINK$DL_LINK -lm$LIBS" +LIBS="$ZLIB_LINK $POSIX4_LINK $INET_LINK $WCHAR_LINK $THREADS_LINK $DL_LINK -lm $LIBS" if test "$wxUSE_GUI" = "yes"; then - LIBS=" $GUI_TK_LIBRARY$PNG_LINK$JPEG_LINK$TIFF_LINK$FREETYPE_LINK$LIBS" + LIBS="$GUI_TK_LIBRARY $PNG_LINK $JPEG_LINK $TIFF_LINK $LIBS" - SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS controls dialogs \ + SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS artprov controls dialogs \ drawing dynamic erase event exec font image \ minimal richedit rotate widgets" @@ -19675,8 +20315,7 @@ fi INCLUDES="-I\${top_builddir}/lib/wx/include/${TOOLCHAIN_NAME} -I\${top_srcdir}/include \ -$REGEX_INCLUDE $ZLIB_INCLUDE $PNG_INCLUDE $JPEG_INCLUDE $TIFF_INCLUDE \ -$FREETYPE_INCLUDE $TOOLKIT_INCLUDE" +$REGEX_INCLUDE $ZLIB_INCLUDE $PNG_INCLUDE $JPEG_INCLUDE $TIFF_INCLUDE $TOOLKIT_INCLUDE" if test "$wxUSE_GTK" = 1; then WXCONFIG_INCLUDE= @@ -19782,12 +20421,15 @@ SAMPLES_SUBDIRS="`echo $SAMPLES_SUBDIRS | tr -s ' ' | tr ' ' '\n' | sort | uniq + + + echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:19791: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:20433: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -20003,7 +20645,7 @@ s%@YACC@%$YACC%g s%@LEX@%$LEX%g s%@LEXLIB@%$LEXLIB%g s%@LN_S@%$LN_S%g -s%@GTK_CONFIG_2_0@%$GTK_CONFIG_2_0%g +s%@PKG_CONFIG@%$PKG_CONFIG%g s%@GTK_CFLAGS@%$GTK_CFLAGS%g s%@GTK_LIBS@%$GTK_LIBS%g s%@GTK_CONFIG@%$GTK_CONFIG%g @@ -20058,6 +20700,8 @@ s%@WXCONFIG_LIBS_STATIC@%$WXCONFIG_LIBS_STATIC%g s%@WXCONFIG_LIBS_STATIC_GL@%$WXCONFIG_LIBS_STATIC_GL%g s%@WXCONFIG_INCLUDE@%$WXCONFIG_INCLUDE%g s%@ALL_OBJECTS@%$ALL_OBJECTS%g +s%@ALL_HEADERS@%$ALL_HEADERS%g +s%@ALL_SOURCES@%$ALL_SOURCES%g s%@GUIDIST@%$GUIDIST%g s%@PORT_FILES@%$PORT_FILES%g s%@DISTDIR@%$DISTDIR%g @@ -20070,6 +20714,7 @@ s%@RESFLAGS@%$RESFLAGS%g s%@RESPROGRAMOBJ@%$RESPROGRAMOBJ%g s%@WX_RESOURCES_MACOSX@%$WX_RESOURCES_MACOSX%g s%@WX_RESOURCES_MACOSX_COMPILED@%$WX_RESOURCES_MACOSX_COMPILED%g +s%@MACOSX_BUNDLE@%$MACOSX_BUNDLE%g s%@LIBWXMACRES@%$LIBWXMACRES%g s%@LIBWXMACRESCOMP@%$LIBWXMACRESCOMP%g s%@LIBWXMACRESWXCONFIG@%$LIBWXMACRESWXCONFIG%g