X-Git-Url: https://git.saurik.com/wxWidgets.git/blobdiff_plain/0a67eeac3def703ca733305d107088ec01c8cbc2..649a48a216a3f373344826253ba43819555a60ee:/docs/latex/wx/dc.tex?ds=sidebyside

diff --git a/docs/latex/wx/dc.tex b/docs/latex/wx/dc.tex
index 5bb946f363..f2f55be06f 100644
--- a/docs/latex/wx/dc.tex
+++ b/docs/latex/wx/dc.tex
@@ -211,7 +211,8 @@ mapping mode.
 \func{wxCoord}{DeviceToLogicalXRel}{\param{wxCoord}{ x}}
 
 Convert device X coordinate to relative logical coordinate, using the current
-mapping mode. Use this function for converting a width, for example.
+mapping mode but ignoring the x axis orientation.
+Use this function for converting a width, for example.
 
 \membersection{wxDC::DeviceToLogicalY}\label{wxdcdevicetologicaly}
 
@@ -225,7 +226,8 @@ mapping mode.
 \func{wxCoord}{DeviceToLogicalYRel}{\param{wxCoord}{ y}}
 
 Convert device Y coordinate to relative logical coordinate, using the current
-mapping mode. Use this function for converting a height, for example.
+mapping mode but ignoring the y axis orientation.
+Use this function for converting a height, for example.
 
 \membersection{wxDC::DrawArc}\label{wxdcdrawarc}
 
@@ -257,13 +259,33 @@ of the bitmap (all bits set to 1), and the current text background colour to dra
 
 Draws a check mark inside the given rectangle.
 
+\membersection{wxDC::DrawCircle}\label{wxdcdrawcircle}
+
+\func{void}{DrawCircle}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ radius}}
+
+\func{void}{DrawCircle}{\param{const wxPoint\&}{ pt}, \param{wxCoord}{ radius}}
+
+Draws a circle with the given centre and radius.
+
+\wxheading{See also}
+
+\helpref{DrawEllipse}{wxdcdrawellipse}
+
 \membersection{wxDC::DrawEllipse}\label{wxdcdrawellipse}
 
 \func{void}{DrawEllipse}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
 
-Draws an ellipse contained in the rectangle with the given top left corner, and with the
-given size.  The current pen is used for the outline and the current brush for
-filling the shape.
+\func{void}{DrawEllipse}{\param{const wxPoint\&}{ pt}, \param{const wxSize\&}{ size}}
+
+\func{void}{DrawEllipse}{\param{const wxRect\&}{ rect}}
+
+Draws an ellipse contained in the rectangle specified either with the given top
+left corner and the given size or directly. The current pen is used for the
+outline and the current brush for filling the shape.
+
+\wxheading{See also}
+
+\helpref{DrawCircle}{wxdcdrawcircle}
 
 \membersection{wxDC::DrawEllipticArc}\label{wxdcdrawellipticarc}
 
@@ -465,7 +487,7 @@ Ends a document page (only relevant when outputting to a printer).
 
 \membersection{wxDC::FloodFill}\label{wxdcfloodfill}
 
-\func{void}{FloodFill}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{const wxColour\&}{ colour}, \param{int}{ style=wxFLOOD\_SURFACE}}
+\func{bool}{FloodFill}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{const wxColour\&}{ colour}, \param{int}{ style=wxFLOOD\_SURFACE}}
 
 Flood fills the device context starting from the given point, using
 the {\it current brush colour}, and using a style:
@@ -475,7 +497,11 @@ the {\it current brush colour}, and using a style:
 \item wxFLOOD\_BORDER: the area to be flooded is bounded by the given colour.
 \end{itemize}
 
-{\it Note:} this function is available in MS Windows only.
+Returns FALSE if the operation failed.
+
+{\it Note:} The present implementation for non-Windows platforms may fail to find
+colour borders if the pixels do not match the colour exactly. However the
+function will still return TRUE.
 
 \membersection{wxDC::GetBackground}\label{wxdcgetbackground}
 
@@ -668,7 +694,7 @@ Gets the current text foreground colour (see \helpref{wxDC::SetTextForeground}{w
 
 Gets the current user scale factor (set by \helpref{SetUserScale}{wxdcsetuserscale}).
 
-\perlnote{In wxPerl this method takes no arguments and returna a two element
+\perlnote{In wxPerl this method takes no arguments and return a two element
  array {\tt ( x, y )}}
 
 \membersection{wxDC::LogicalToDeviceX}\label{wxdclogicaltodevicex}
@@ -683,7 +709,8 @@ mapping mode.
 \func{wxCoord}{LogicalToDeviceXRel}{\param{wxCoord}{ x}}
 
 Converts logical X coordinate to relative device coordinate, using the current
-mapping mode. Use this for converting a width, for example.
+mapping mode but ignoring the x axis orientation.
+Use this for converting a width, for example.
 
 \membersection{wxDC::LogicalToDeviceY}\label{wxdclogicaltodevicey}
 
@@ -697,7 +724,8 @@ mapping mode.
 \func{wxCoord}{LogicalToDeviceYRel}{\param{wxCoord}{ y}}
 
 Converts logical Y coordinate to relative device coordinate, using the current
-mapping mode. Use this for converting a height, for example.
+mapping mode but ignoring the y axis orientation.
+Use this for converting a height, for example.
 
 \membersection{wxDC::MaxX}\label{wxdcmaxx}
 
@@ -740,6 +768,23 @@ doesn't contain anything.
 
 \helpref{CalcBoundingBox}{wxdccalcboundingbox}
 
+\membersection{wxDC::SetAxisOrientation}\label{wxdcsetaxisorientation}
+
+\func{void}{SetAxisOrientation}{\param{bool}{ xLeftRight},
+                                \param{bool}{ yBottomUp}}
+
+Sets the x and y axis orientation (i.e., the direction from lowest to
+highest values on the axis). The default orientation is the natural
+orientation, e.g. x axis from left to right and y axis from bottom up.
+
+\wxheading{Parameters}
+
+\docparam{xLeftRight}{True to set the x axis orientation to the natural
+left to right orientation, false to invert it.}
+
+\docparam{yBottomUp}{True to set the y axis orientation to the natural
+bottom up orientation, false to invert it.}
+
 \membersection{wxDC::SetDeviceOrigin}\label{wxdcsetdeviceorigin}
 
 \func{void}{SetDeviceOrigin}{\param{wxCoord}{ x}, \param{wxCoord}{ y}}
@@ -767,11 +812,21 @@ whether text will be drawn with a background colour or not.
 
 \func{void}{SetClippingRegion}{\param{wxCoord}{ x}, \param{wxCoord}{ y}, \param{wxCoord}{ width}, \param{wxCoord}{ height}}
 
+\func{void}{SetClippingRegion}{\param{const wxPoint\& }{pt}, \param{const wxSize\& }{sz}}
+
+\func{void}{SetClippingRegion}{\param{const wxRect\&}{ rect}}
+
 \func{void}{SetClippingRegion}{\param{const wxRegion\&}{ region}}
 
-Sets the clipping region for the DC. The clipping region is an area
-to which drawing is restricted. Possible uses for the clipping region are for clipping text
-or for speeding up window redraws when only a known area of the screen is damaged.
+Sets the clipping region for this device context to the intersection of the
+given region described by the parameters of this method and the previously set
+clipping region. You should call 
+\helpref{DestroyClippingRegion}{wxdcdestroyclippingregion} if you want to set
+the clipping region exactly to the region specified.
+
+The clipping region is an area to which drawing is restricted. Possible uses
+for the clipping region are for clipping text or for speeding up window redraws
+when only a known area of the screen is damaged.
 
 \wxheading{See also}
 
@@ -807,11 +862,8 @@ when drawing into a monochrome bitmap.
 
 \func{void}{SetFont}{\param{const wxFont\& }{font}}
 
-Sets the current font for the DC.
-
-If the argument is wxNullFont, the current font is selected out of the device
-context, and the original font restored, allowing the current font to
-be destroyed safely.
+Sets the current font for the DC. It must be a valid font, in particular you
+should not pass {\tt wxNullFont} to this method.
 
 See also \helpref{wxFont}{wxfont}.
 
@@ -861,7 +913,7 @@ measurement used to convert logical units to device units. Note that
 in X, text drawing isn't handled consistently with the mapping mode; a
 font is always specified in point size. However, setting the {\it
 user scale} (see \helpref{wxDC::SetUserScale}{wxdcsetuserscale}) scales the text appropriately. In
-Windows, scaleable TrueType fonts are always used; in X, results depend
+Windows, scalable TrueType fonts are always used; in X, results depend
 on availability of fonts, but usually a reasonable match is found.
 
 Note that the coordinate origin should ideally be selectable, but for
@@ -946,7 +998,7 @@ Starts a document page (only relevant when outputting to a printer).
 \section{\class{wxDCClipper}}\label{wxdcclipper}
 
 This is a small helper class which sets the specified to its constructor
-clipping region and then automatically destroyes it in its destructor. Using
+clipping region and then automatically destroys it in its destructor. Using
 it ensures that unwanted clipping region is not left set on the DC.
 
 \wxheading{Derived from}
@@ -976,5 +1028,5 @@ specified rectangle.
 
 \func{}{\destruct{wxDCClipper}}{\void}
 
-Destructor: destroyes the clipping region set in the constructor.
+Destructor: destroys the clipping region set in the constructor.
 
