Building wxPython on Unix or Unix-like Systems
----------------------------------------------
-The basic steps for building wxPython for Unix or Unix-like systems
-are:
-
- 1. Compile and/or install glib and gtk+
- 2. Compile and/or install wxGTK
- 3. Compile and install wxPython
-
-We'll go into more detail of each of these steps below, but first a
-few bits of background information on tools.
-
-I use a tool called SWIG (http://www.swig.org) to help generate the
-C++ sources used in the wxPython extension module. However you don't
-need to have SWIG unless you want to modify the *.i files. I've made
-several modifications to SWIG specific to wxPython's needs and so the
-modified sources are included in the wx CVS at .../wxPython/wxSWIG.
-If you need to modify the *.i files for wxPython then change to this
-directory and run:
+NOTE: You should probably look at the ../ README.1st.txt file for
+directions for how to build wxPython the "new way." This files
+describes the "old way" to build on unix-like systems. The difference
+is very simple: The new way uses a private copy of wxGTK while the
+old way uses either an existing wxGTK that may be installed and used
+by other apps, or you can build a wxGTK that will be accissible by
+other apps.
+
+
+NOTE 2: I use a tool called SWIG (http://www.swig.org) to help
+generate the C++ sources used in the wxPython extension module.
+However you don't need to have SWIG unless you want to modify the *.i
+files. I've made several modifications to and older version of SWIG
+that are specific to wxPython's needs and so the modified sources are
+included in the wx CVS at .../wxPython/wxSWIG. But because of the
+size and since most people won't need it my SWIG is not included in
+the wxPythonSrc tarball. You'll need to get it from CVS or a CVS
+snapshot.
+
+If you need to modify the *.i files for wxPython then you will need to
+build wxswig. Change to the .../wxPython/wxSWIG directory and run:
configure
make
gtk-config --version
- If you have version 1.2.5 or better then you're all set. You can
- skip to step #2.
+ If you have version 1.2.7 or better then you're all set. Otherwise
+ either get the pacakges for your unix distribution and install them
+ or get the sources from www.gtk.org and build and install them.
-B. If your system has a binary package mechanism, (RPMs, debs,
- whatever...) check and see if binaries for glib abd gtk+ are
- available. Be sure to get the runtime library package as well as
- the development package, if they are separate. Install them with
- your package tool, and skip to step #2.
-
-C. If all else fails, you can get the source code for glib and gtk+ at
- http://www.gtk.org/. Fetch the latest of each in the 1.2.x
- series. Compile and install each of them like this:
-
- gzip -d [package].tar.gz | tar xvf -
- cd [package]
- ./configure
- make
- make install
-
- The last step will probably have to be done as root. Also, if your
- system needs anything done to update the dynamic loader for shared
- libraries, (such as running ldconfig on Linux) then do it after
- each library is installed.
+ The best version to get is the latest 1.2.x release as the
+ wxWindows support for GTK 2.x is still beta-level. (Most tings
+ work great though, and it looks real nice.)
A. You can find the sources and RPMs for wxGTK at
http://wxwindows.org/, just follow the download links from the
- nevigation panel. You can also check out a current snapshot of the
- sources from the CVS server. (Some information about annonymous
- CVS access is at http://wxwindows.org/cvs.htm.) The advantage of
- using CVS is that you can easily update as soon as the developers
- check in new sources or fixes. The advantage of using a released
- version is that it usually has had more thorough testing done. You
- can decide which method is best for you.
+ navigation panel.
+
+ Source code for wxGTK is now included with the wxPythonSrc tarball,
+ and is the recommended way to get released wxGTK source code if you
+ plan on building both.
+
+ You can also check out a current snapshot of the sources from the
+ CVS server. (Some information about annonymous CVS access is at
+ http://wxwindows.org/cvs.htm.) The advantage of using CVS is that
+ you can easily update as soon as the developers check in new
+ sources or fixes. The advantage of using a released version is
+ that it usually has had more thorough testing done. You can decide
+ which method is best for you.
+
B. You'll usually want to use a version of wxGTK that has the same
version number as the wxPython sources you are using. (Another
- advantage of using CVS is that you'll get both at the same time.)
+ advantage of using wxPythonSrc or CVS is that you'll get both at
+ the same time.)
+
C. If using the RPMs be sure to get both the wxGTK and wxGTK-devel
RPMs (at a minimum) and then install them as root.
rpm -Uhv wxGTK-2.2.2-0.i386.rpm wxGTK-devel-2.2.2-0.i386.rpm
+
D. If using the sources (either from the tarball or from CVS) then
configure it like this:
cd wxWindows # or whatever your top-level directory is called
mkdir build
cd build
- ../configure --with-gtk
+ ../configure --with-gtk --enable-geometry
There are gobs and gobs of options for the configure script, run
../configure --help to see them all. I'll describe some that I find
special debugging code in wxWindows by defining the __WXDEBUG__
macro. You'll get some extra asserts, failure logging, etc.
- To make a static library and not make a shared library, use the
- --disable-shared and --enable-static flags.
-
- NOTE: There is a potential type mismatch between Python and wxGTK.
- This happens if Python defines some flags that turn on 64-bit file
- offset support and wxGTK does not. This causes some basic types,
- like off_t, to be typedef'd differently causing the C++ method
- signatures to be incompatible and giving link errors at runtime.
- If you get errors upon running a wxPython script that looks
- something like this:
-
- SeekI_13wxInputStream10wxSeekMode: referenced symbol not found
-
- then that is probably the issue. This can be fixed in the current
- code by predefining these flags before wxGTK's configure is run,
- for example:
-
- export CFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -DHAVE_LARGEFILE_SUPPORT"
- export CXXFLAGS=$CFLAGS
- ../configure --with-gtk --with-opengl --enable-debug
+ If you are using GTK 2.x then you'll want to add --enable-gtk2 and
+ probably also --enable-unicode.
- In the 2.3.3 final release there will be a real configure flag for
- it, and it should be enabled by default. You will be able to use
- --enable-largefile or --disable-largefile to control it. If you
- still get this or a similar error with 2.3.3 then try disabling
- largefile support in GTK.
E. Now just compile and install. You need to use GNU make, so if your
system has something else get GNU make and build and install it and
system needs anything done to update the dynamic loader for shared
libraries, (such as running ldconfig on Linux) then do it now.
+
F. You can test your build by changing to one of the directories under
build/samples or build/demos, running make and then running the
executable that is built.
A. You have the same options (and same advantages/disadvantages) for
getting the wxPython source, either a released snapshot or from
- CVS. The released version file is named wxPython-[version].tar.gz
+ CVS. The released version file is named wxPythonSrc-[version].tar.gz
and is available at http://wxpython.org/download.php. If you want
to use CVS you'll find wxPython in the wxWindows CVS tree (see
above) in the wxWindows/wxPython directory.
-B. As mentioned previouslly, wxPython is built with the standard
- Python Distutils tool. If you are using Python 2.0 or later you
- are all set, otherwise you need to download and install Distutils
- 1.0 from http://www.python.org/sigs/distutils-sig/.
+
+B. wxPython is built with the standard Python Distutils tool and
+ currently includes it's own snapshot of the latest version of
+ distutils which can also be used with previous versions of Python
On Unix systems Distutils figures out what commands and flags to
use for the compiler and linker by looking in the Makefile that was
used to build Python itself. Most of the time this works okay. If
it doesn't, there doesn't seem to be a way to override the values
that Distutils uses without hacking either Distutils itself, or
- Python's Makefile. (Complain to the distutils-sig about this
- please.) For example, on a Solaris system I had to edit
- /usr/local/lib/python1.5/config/Makefile and replace
-
- LDSHARED=ld -G
-
- with
-
- LDSHARED=gcc -G
-
- This particular problem has been fixed in Python 1.6 and beyond,
- but there may be similar issues on other platforms.
+ Python's Makefile. (NOTE: This has been changed with the
+ distutilsincluded with Python 2.3 but I havn't yet looked into how
+ best to utilize this in wxPython...)
While we're on the subject of how Python was built... Since
wxPython is a C++ extension some platforms and/or compilers will
make install
I recently built Python 2.1.3 and Python 2.2.1 on Solaris and did
- not have to resort to this workaround so apparently thigns are
+ not have to resort to this workaround so apparently things are
getting better there. I will leave this note here though in case
there are similar issues elsewhere. However I did run into a
Python build issue that affects the wxPython build when attempting
to use SunCC instead of GNU gcc. See the note below titled
"Building with non-GNU compilers" if you are interested.
+
C. Change to the root wxPython directory and look at the setup.py
file. This is the script that configures and defines all the
information that Distutils needs to build wxPython. There are some
will be executed to regenerate the wrapper C++
and shadow python files.
- IN_CVS_TREE If you are using the CVS version of the
- wxWindows and wxPython sources then you will
- need to set this flag to non-zero. This is
- needed because some source files from the
- wxWindows tree are copied to be under the
- wxPython tree in order to keep Distutils happy.
- With this flag set then setup.py will
- automatically keep these copied sources up to
- date if the original version is ever updated.
- If you are using the tar.gz version of the
- Python sources then these copied sources are
- already present in your source tree.
+ etc.
D. To build and install wxPython you simply need to execute the
site-packages directory you may need to be root to run the install
command.
- python setup.py build
- python setup.py install
+ python setup.py build install
+
+ If you need to change any of the build flags that can also be done
+ on the setup.py command line, like this:
+
+ python setup.py BUILD_GLCANVAS=0 build install
+
+ If you are using GTK 2.x then you'll want to add these flags:
+
+ python setup.py WXPORT=gtk2 UNICODE=1 build install
+
+ If you would like to install to someplace besides the Python
+ site-packages directory (such as to your home directory) then you
+ can add "--root=<path>" after the "install" command. To use
+ wxPython like this you'll need to ensure that the directory
+ containing wxPyrthon is contained in in the PYTHONPATH environment
+ variable.
+
E. At this point you should be able to change into the wxPython/demo
directory and run the demo:
python demo.py
-F. If you would like to make a test build that doesn't overwrite the
+
+F. If you would like to make a test build that doesn't overwrite any
installed version of wxPython you can do so with this command
instead of the install command above:
After making and installing Python with this configuration you should
be able to build wxPython as described in the steps above.
+
+
-----------------
robin@alldunn.com
projects / wxWidgets.git / blobdiff