are not supported, nor all methods which use them).
These standard functions are not documented in this manual so please see the STL documentation.
The behaviour of all these functions is identical to the behaviour described
-there.
+there (except that wxString is sensitive to null character).
+
+You may notice that wxString sometimes has many functions which do the same
+thing like, for example, \helpref{Length()}{wxstringlength},
+\helpref{Len()}{wxstringlen} and {\tt length()} which all return the string
+length. In all cases of such duplication the {\tt std::string}-compatible
+method ({\tt length()} in this case, always the lowercase version) should be
+used as it will ensure smoother transition to {\tt std::string} when wxWidgets
+starts using it instead of wxString.
+
+Also please note that in this manual \texttt{char} is sometimes used instead of
+\texttt{wxChar} because it hasn't been fully updated yet. Please substitute as
+necessary and refer to the sources in case of a doubt.
+
\wxheading{Derived from}
<wx/string.h>
+\wxheading{Predefined objects}
+
+Objects:
+
+{\bf wxEmptyString}
+
\wxheading{See also}
\overview{Overview}{wxstringoverview}
\latexignore{\rtfignore{\wxheading{Function groups}}}
-\membersection{Constructors and assignment operators}
+\membersection{Constructors and assignment operators}\label{constructorsinwxstring}
-A strign may be constructed either from a C string, (some number of copies of)
+A string may be constructed either from a C string, (some number of copies of)
a single character or a wide (UNICODE) string. For all constructors (except the
default which creates an empty string) there is also a corresponding assignment
operator.
\helpref{operator $=$}{wxstringoperatorassign}\\
\helpref{\destruct{wxString}}{wxstringdestruct}
-\membersection{String length}
+\membersection{String length}\label{lengthfunctionsinwxstring}
These functions return the string length and check whether the string is empty
or empty it.
\helpref{Empty}{wxstringempty}\\
\helpref{Clear}{wxstringclear}
-\membersection{Character access}
+\membersection{Character access}\label{characteraccessinwxstring}
Many functions in this section take a character index in the string. As with C
strings and/or arrays, the indices start from $0$, so the first character of a
string is string[$0$]. Attempt to access a character beyond the end of the
-string (which may be even $0$ if the string is empty) will provocate an assert
+string (which may be even $0$ if the string is empty) will provoke an assert
failure in \helpref{debug build}{debuggingoverview}, but no checks are done in
release builds.
\helpref{Last}{wxstringlast}\\
\helpref{operator []}{wxstringoperatorbracket}\\
\helpref{c\_str}{wxstringcstr}\\
+\helpref{mb\_str}{wxstringmbstr}\\
+\helpref{wc\_str}{wxstringwcstr}\\
+\helpref{fn\_str}{wxstringfnstr}\\
\helpref{operator const char*}{wxstringoperatorconstcharpt}
-\membersection{Concatenation}
+\membersection{Concatenation}\label{concatenationinwxstring}
Anything may be concatenated (appended to) with a string. However, you can't
append something to a C string (including literal constants), so to do this it
\helpref{Append}{wxstringappend}\\
\helpref{Prepend}{wxstringprepend}
-\membersection{Comparison}
+\membersection{Comparison}\label{comparisoninwxstring}
The default comparison function \helpref{Cmp}{wxstringcmp} is case-sensitive and
so is the default version of \helpref{IsSameAs}{wxstringissameas}. For case
insensitive comparisons you should use \helpref{CmpNoCase}{wxstringcmpnocase} or
give a second parameter to IsSameAs. This last function is may be more
convenient if only equality of the strings matters because it returns a boolean
-true value if the strings are the same and not 0 (which is usually FALSE in C)
-as Cmp does.
+true value if the strings are the same and not 0 (which is usually false in C)
+as {\tt Cmp()} does.
\helpref{Matches}{wxstringmatches} is a poor man's regular expression matcher:
it only understands '*' and '?' metacharacters in the sense of DOS command line
interpreter.
+\helpref{StartsWith}{wxstringstartswith} is helpful when parsing a line of
+text which should start with some predefined prefix and is more efficient than
+doing direct string comparison as you would also have to precalculate the
+length of the prefix then.
+
\helpref{Cmp}{wxstringcmp}\\
\helpref{CmpNoCase}{wxstringcmpnocase}\\
\helpref{IsSameAs}{wxstringissameas}\\
-\helpref{Matches}{wxstringmatches}
+\helpref{Matches}{wxstringmatches}\\
+\helpref{StartsWith}{wxstringstartswith}\\
+\helpref{EndsWith}{wxstringendswith}
-\membersection{Substring extraction}
+\membersection{Substring extraction}\label{substringextractioninwxstring}
These functions allow to extract substring from this string. All of them don't
modify the original string and return a new string containing the extracted
\helpref{BeforeFirst}{wxstringbeforefirst}\\
\helpref{BeforeLast}{wxstringbeforelast}\\
\helpref{AfterFirst}{wxstringafterfirst}\\
-\helpref{AfterLast}{wxstringafterlast}
+\helpref{AfterLast}{wxstringafterlast}\\
+\helpref{StartsWith}{wxstringstartswith}\\
+\helpref{EndsWith}{wxstringendswith}
+
-\membersection{Case conversion}
+\membersection{Case conversion}\label{caseconversioninwxstring}
The MakeXXX() variants modify the string in place, while the other functions
-return a new string which containts the original text converted to the upper or
+return a new string which contains the original text converted to the upper or
lower case and leave the original string unchanged.
\helpref{MakeUpper}{wxstringmakeupper}\\
\helpref{MakeLower}{wxstringmakelower}\\
\helpref{Lower}{wxstringlower}
-\membersection{Searching and replacing}
+\membersection{Searching and replacing}\label{searchingandreplacinginwxstring}
These functions replace the standard {\it strchr()} and {\it strstr()}
functions.
\helpref{Find}{wxstringfind}\\
\helpref{Replace}{wxstringreplace}
-\membersection{Writing values into the string}
+\membersection{Conversion to numbers}\label{conversiontonumbersinwxstring}
+
+The string provides functions for conversion to signed and unsigned integer and
+floating point numbers. All three functions take a pointer to the variable to
+put the numeric value in and return true if the {\bf entire} string could be
+converted to a number.
+
+\helpref{ToLong}{wxstringtolong}\\
+\helpref{ToULong}{wxstringtoulong}\\
+\helpref{ToDouble}{wxstringtodouble}
+
+\membersection{Writing values into the string}\label{writingintostringinwxstring}
Both formatted versions (\helpref{Printf}{wxstringprintf}) and stream-like
-insertion operators exist (for basic types only).
+insertion operators exist (for basic types only). Additionally, the
+\helpref{Format}{wxstringformat} function allows to use simply append
+formatted value to a string:
+
+\begin{verbatim}
+ // the following 2 snippets are equivalent
+
+ wxString s = "...";
+ s += wxString::Format("%d", n);
+
+ wxString s;
+ s.Printf("...%d", n);
+\end{verbatim}
+\helpref{Format}{wxstringformat}\\
+\helpref{FormatV}{wxstringformatv}\\
\helpref{Printf}{wxstringprintf}\\
\helpref{PrintfV}{wxstringprintfv}\\
\helpref{operator \cinsert}{wxstringoperatorout}
-\membersection{Memory management}
+\membersection{Memory management}\label{memoryinwxstring}
-These are "advanced" functions and they will be needed quite rarily.
+These are "advanced" functions and they will be needed quite rarely.
\helpref{Alloc}{wxstringalloc} and \helpref{Shrink}{wxstringshrink} are only
interesting for optimization purposes.
\helpref{GetWriteBuf}{wxstringgetwritebuf} may be very useful when working with
\helpref{GetWriteBuf}{wxstringgetwritebuf}\\
\helpref{UngetWriteBuf}{wxstringungetwritebuf}
-\membersection{Miscellaneous}
+\membersection{Miscellaneous}\label{miscellaneousinwxstring}
Other string functions.
\helpref{Pad}{wxstringpad}\\
\helpref{Truncate}{wxstringtruncate}
-\membersection{wxWindows 1.xx compatiblity functions}
+\membersection{wxWidgets 1.xx compatibility functions}\label{backwardcompatibilityinwxstring}
-These functiosn are deprecated, please consider using new wxWindows 2.0
+These functions are deprecated, please consider using new wxWidgets 2.0
functions instead of them (or, even better, std::string compatible variants).
\helpref{SubString}{wxstringsubstring}\\
// find first n characters of sz
size_t find(const char* sz, size_t nStart = 0, size_t n = npos) const;
- // find the first occurence of character ch after nStart
+ // find the first occurrence of character ch after nStart
size_t find(char ch, size_t nStart = 0) const;
// rfind() family is exactly like find() but works right to left
// as find, but from the end
size_t rfind(char ch, size_t nStart = npos) const;
- // find first/last occurence of any character in the set
+ // find first/last occurrence of any character in the set
//
size_t find_first_of(const wxString& str, size_t nStart = 0) const;
// same as rfind(char, size_t)
size_t find_last_of (char c, size_t nStart = npos) const;
- // find first/last occurence of any character not in the set
+ // find first/last occurrence of any character not in the set
//
size_t find_first_not_of(const wxString& str, size_t nStart = 0) const;
\func{}{wxString}{\void}
-Default constructor.
+Default constructor. Initializes the string to {\tt ""} (empty string).
\func{}{wxString}{\param{const wxString\&}{ x}}
\func{}{wxString}{\param{const char*}{ psz}, \param{size\_t}{ nLength = wxSTRING\_MAXLEN}}
Takes first {\it nLength} characters from the C string {\it psz}.
-The default value of wxSTRING\_MAXLEN means take all the string.
+The default value of {\tt wxSTRING\_MAXLEN} means to take all the string.
+
+Note that this constructor may be used even if {\it psz} points to a buffer
+with binary data (i.e. containing {\tt NUL} characters) as long as you provide
+the correct value for {\it nLength}. However, the default form of it works
+only with strings without intermediate {\tt NUL}s because it uses
+{\tt strlen()} to calculate the effective length and it would not give correct
+results otherwise.
\func{}{wxString}{\param{const unsigned char*}{ psz}, \param{size\_t}{ nLength = wxSTRING\_MAXLEN}}
For compilers using unsigned char: takes first {\it nLength} characters from the C string {\it psz}.
-The default value of wxSTRING\_MAXLEN means take all the string.
+The default value of {\tt wxSTRING\_MAXLEN} means take all the string.
+
+{\bf Note:} In Unicode build, all of the above constructors take
+{\tt wchar\_t} arguments instead of {\tt char}.
+
+\wxheading{Constructors with conversion}
+
+The following constructors allow you to construct wxString from wide string
+in ANSI build or from C string in Unicode build.
+
+\func{}{wxString}{\param{const wchar\_t*}{ psz}, \param{wxMBConv\&}{ conv}, \param{size\_t}{ nLength = wxSTRING\_MAXLEN}}
+
+Initializes the string from first \arg{nLength} characters of wide string.
+The default value of {\tt wxSTRING\_MAXLEN} means take all the string.
+In ANSI build, \arg{conv}'s
+\helpref{WC2MB}{wxmbconvwc2mb} method is called to
+convert \arg{psz} to wide string. It is ignored in Unicode build.
+
+\func{}{wxString}{\param{const char*}{ psz}, \param{wxMBConv\&}{ conv}, \param{size\_t}{ nLength = wxSTRING\_MAXLEN}}
+
+Initializes the string from first \arg{nLength} characters of C string.
+The default value of {\tt wxSTRING\_MAXLEN} means take all the string.
+In Unicode build, \arg{conv}'s
+\helpref{MB2WC}{wxmbconvmb2wc} method is called to
+convert \arg{psz} to wide string. It is ignored in ANSI build.
-\func{}{wxString}{\param{const wchar\_t*}{ psz}}
+\wxheading{See also}
-Constructs a string from the wide (UNICODE) string.
+\helpref{wxMBConv classes}{mbconvclasses}, \helpref{mb\_str}{wxstringmbstr},
+\helpref{wc\_str}{wxstringwcstr}
\membersection{wxString::\destruct{wxString}}\label{wxstringdestruct}
\end{verbatim}
-because it will avoid the need of reallocating string memory many times (in case
+because it will avoid the need to reallocate string memory many times (in case
of long strings). Note that it does not set the maximal length of a string - it
will still expand if more than {\it nLen} characters are stored in it. Also, it
does not truncate the existing string (use
\constfunc{wxString}{AfterFirst}{\param{char}{ ch}}
-Gets all the characters after the first occurence of {\it ch}.
+Gets all the characters after the first occurrence of {\it ch}.
Returns the empty string if {\it ch} is not found.
\membersection{wxString::AfterLast}\label{wxstringafterlast}
\constfunc{wxString}{AfterLast}{\param{char}{ ch}}
-Gets all the characters after the last occurence of {\it ch}.
+Gets all the characters after the last occurrence of {\it ch}.
Returns the whole string if {\it ch} is not found.
\membersection{wxString::BeforeFirst}\label{wxstringbeforefirst}
\constfunc{wxString}{BeforeFirst}{\param{char}{ ch}}
-Gets all characters before the first occurence of {\it ch}.
+Gets all characters before the first occurrence of {\it ch}.
Returns the whole string if {\it ch} is not found.
\membersection{wxString::BeforeLast}\label{wxstringbeforelast}
\constfunc{wxString}{BeforeLast}{\param{char}{ ch}}
-Gets all characters before the last occurence of {\it ch}.
+Gets all characters before the last occurrence of {\it ch}.
Returns the empty string if {\it ch} is not found.
\membersection{wxString::c\_str}\label{wxstringcstr}
-\constfunc{const char *}{c\_str}{\void}
+\constfunc{const wxChar *}{c\_str}{\void}
+
+Returns a pointer to the string data ({\tt const char*} in ANSI build,
+{\tt const wchar\_t*} in Unicode build).
+
+\wxheading{See also}
-Returns a pointer to the string data.
+\helpref{mb\_str}{wxstringmbstr}, \helpref{wc\_str}{wxstringwcstr},
+\helpref{fn\_str}{wxstringfnstr}
\membersection{wxString::Clear}\label{wxstringclear}
\membersection{wxString::Cmp}\label{wxstringcmp}
+\constfunc{int}{Cmp}{\param{const wxString\&}{ s}}
+
\constfunc{int}{Cmp}{\param{const char*}{ psz}}
Case-sensitive comparison.
Returns a positive value if the string is greater than the argument, zero if
-it si equal to it or negative value if it is less than argument (same semantics
+it is equal to it or a negative value if it is less than the argument (same semantics
as the standard {\it strcmp()} function).
See also \helpref{CmpNoCase}{wxstringcmpnocase}, \helpref{IsSameAs}{wxstringissameas}.
\membersection{wxString::CmpNoCase}\label{wxstringcmpnocase}
+\constfunc{int}{CmpNoCase}{\param{const wxString\&}{ s}}
+
\constfunc{int}{CmpNoCase}{\param{const char*}{ psz}}
Case-insensitive comparison.
Returns a positive value if the string is greater than the argument, zero if
-it si equal to it or negative value if it is less than argument (same semantics
+it is equal to it or a negative value if it is less than the argument (same semantics
as the standard {\it strcmp()} function).
See also \helpref{Cmp}{wxstringcmp}, \helpref{IsSameAs}{wxstringissameas}.
\constfunc{bool}{Contains}{\param{const wxString\&}{ str}}
-Returns 1 if target appears anyhere in wxString; else 0.
+Returns 1 if target appears anywhere in wxString; else 0.
\membersection{wxString::Empty}\label{wxstringempty}
\membersection{wxString::Find}\label{wxstringfind}
-\constfunc{int}{Find}{\param{char}{ ch}, \param{bool}{ fromEnd = FALSE}}
+\constfunc{int}{Find}{\param{char}{ ch}, \param{bool}{ fromEnd = false}}
Searches for the given character. Returns the starting index, or -1 if not found.
\membersection{wxString::First}\label{wxstringfirst}
-\func{size\_t}{First}{\param{char}{ c}}
+\func{int}{First}{\param{char}{ c}}
+
+\constfunc{int}{First}{\param{const char*}{ psz}}
+
+\constfunc{int}{First}{\param{const wxString\&}{ str}}
+
+Same as \helpref{Find}{wxstringfind}.
+
+\membersection{wxString::fn\_str}\label{wxstringfnstr}
+
+\constfunc{const wchar\_t*}{fn\_str}{\void}
+
+\constfunc{const char*}{fn\_str}{\void}
-\constfunc{size\_t}{First}{\param{const char*}{ psz}}
+\constfunc{const wxCharBuffer}{fn\_str}{\void}
-\constfunc{size\_t}{First}{\param{const wxString\&}{ str}}
+Returns string representation suitable for passing to OS' functions for
+file handling. In ANSI build, this is same as \helpref{c\_str}{wxstringcstr}.
+In Unicode build, returned value can be either wide character string
+or C string in charset matching the {\tt wxConvFileName} object, depending on
+the OS.
-\constfunc{size\_t}{First}{\param{const char}{ ch}}
+\wxheading{See also}
+
+\helpref{wxMBConv}{wxmbconv},
+\helpref{wc\_str}{wxstringwcstr}, \helpref{mb\_str}{wxstringwcstr}
+
+\membersection{wxString::Format}\label{wxstringformat}
+
+\func{static wxString}{Format}{\param{const wxChar }{*format}, \param{}{...}}
+
+This static function returns the string containing the result of calling
+\helpref{Printf}{wxstringprintf} with the passed parameters on it.
+
+\wxheading{See also}
+
+\helpref{FormatV}{wxstringformatv}, \helpref{Printf}{wxstringprintf}
+
+\membersection{wxString::FormatV}\label{wxstringformatv}
-Returns the first occurrence of the item.
+\func{static wxString}{FormatV}{\param{const wxChar }{*format}, \param{va\_list }{argptr}}
+
+This static function returns the string containing the result of calling
+\helpref{PrintfV}{wxstringprintfv} with the passed parameters on it.
+
+\wxheading{See also}
+
+\helpref{Format}{wxstringformat}, \helpref{PrintfV}{wxstringprintfv}
\membersection{wxString::Freq}\label{wxstringfreq}
-\constfunc{int}{Frec}{\param{char }{ch}}
+\constfunc{int}{Freq}{\param{char }{ch}}
+
+Returns the number of occurrences of {\it ch} in the string.
+
+\membersection{wxString::FromAscii}\label{wxstringfromascii}
-Returns the number of occurences of {it ch} in the string.
+\func{static wxString }{FromAscii}{\param{const char*}{ s}}
+
+\func{static wxString }{FromAscii}{\param{const char}{ c}}
+
+Converts the string or character from an ASCII, 7-bit form
+to the native wxString representation. Most useful when using
+a Unicode build of wxWidgets.
+Use \helpref{wxString constructors}{wxstringconstruct} if you
+need to convert from another charset.
\membersection{wxString::GetChar}\label{wxstringgetchar}
\membersection{wxString::GetData}\label{wxstringgetdata}
-\constfunc{const char*}{GetData}{\void}
+\constfunc{const wxChar*}{GetData}{\void}
-wxWindows compatibility conversion. Returns a constant pointer to the data in the string.
+wxWidgets compatibility conversion. Returns a constant pointer to the data in the string.
\membersection{wxString::GetWritableChar}\label{wxstringgetwritablechar}
\membersection{wxString::GetWriteBuf}\label{wxstringgetwritebuf}
-\func{char*}{GetWriteBuf}{\param{size\_t}{ len}}
+\func{wxChar*}{GetWriteBuf}{\param{size\_t}{ len}}
Returns a writable buffer of at least {\it len} bytes.
+It returns a pointer to a new memory block, and the
+existing data will not be copied.
Call \helpref{wxString::UngetWriteBuf}{wxstringungetwritebuf} as soon as possible
to put the string back into a reasonable state.
\membersection{wxString::Index}\label{wxstringindex}
-\constfunc{size\_t}{Index}{\param{char}{ ch}, \param{int}{ startpos = 0}}
-
-Same as \helpref{wxString::Find}{wxstringfind}.
+\constfunc{size\_t}{Index}{\param{char}{ ch}}
\constfunc{size\_t}{Index}{\param{const char*}{ sz}}
Same as \helpref{wxString::Find}{wxstringfind}.
-\constfunc{size\_t}{Index}{\param{const char*}{ sz}, \param{bool}{ caseSensitive = TRUE}, \param{bool}{ fromEnd = FALSE}}
-
-Search the element in the array, starting from either side.
-
-If {\it fromEnd} is TRUE, reverse search direction.
-
-If {\bf caseSensitive}, comparison is case sensitive (the default).
-
-Returns the index of the first item matched, or NOT\_FOUND.
-
% TODO
%\membersection{wxString::insert}\label{wxstringinsert}
% Wrong!
\constfunc{bool}{IsAscii}{\void}
-Returns TRUE if the string is ASCII.
+Returns true if the string contains only ASCII characters.
\membersection{wxString::IsEmpty}\label{wxstringisempty}
\constfunc{bool}{IsEmpty}{\void}
-Returns TRUE if the string is NULL.
+Returns true if the string is empty.
\membersection{wxString::IsNull}\label{wxstringisnull}
\constfunc{bool}{IsNull}{\void}
-Returns TRUE if the string is NULL (same as IsEmpty).
+Returns true if the string is empty (same as \helpref{IsEmpty}{wxstringisempty}).
\membersection{wxString::IsNumber}\label{wxstringisnumber}
\constfunc{bool}{IsNumber}{\void}
-Returns TRUE if the string is a number.
+Returns true if the string is an integer (with possible sign).
\membersection{wxString::IsSameAs}\label{wxstringissameas}
-\constfunc{bool}{IsSameAs}{\param{const char*}{ psz}, \param{bool}{ caseSensitive = TRUE}}
+\constfunc{bool}{IsSameAs}{\param{const char*}{ psz}, \param{bool}{ caseSensitive = true}}
Test for string equality, case-sensitive (default) or not.
-caseSensitive is TRUE by default (case matters).
+caseSensitive is true by default (case matters).
-Returns TRUE if strings are equal, FALSE otherwise.
+Returns true if strings are equal, false otherwise.
-See also \helpref{Cmp}{wxstringcmp}, \helpref{CmpNoCase}{wxstringcmpnocase}.
+See also \helpref{Cmp}{wxstringcmp}, \helpref{CmpNoCase}{wxstringcmpnocase}
+
+\constfunc{bool}{IsSameAs}{\param{char}{ c}, \param{bool}{ caseSensitive = true}}
+
+Test whether the string is equal to the single character {\it c}. The test is
+case-sensitive if {\it caseSensitive} is true (default) or not if it is false.
+
+Returns true if the string is equal to the character, false otherwise.
+
+See also \helpref{Cmp}{wxstringcmp}, \helpref{CmpNoCase}{wxstringcmpnocase}
\membersection{wxString::IsWord}\label{wxstringisword}
\constfunc{bool}{IsWord}{\void}
-Returns TRUE if the string is a word. TODO: what's the definition of a word?
+Returns true if the string is a word. TODO: what's the definition of a word?
\membersection{wxString::Last}\label{wxstringlast}
\constfunc{wxString}{Left}{\param{size\_t}{ count}}
-Returns the first {\it count} characters.
-
-\constfunc{wxString}{Left}{\param{char}{ ch}}
-
-Returns all characters before the first occurence of {\it ch}.
-Returns the whole string if {\it ch} is not found.
+Returns the first {\it count} characters of the string.
\membersection{wxString::Len}\label{wxstringlen}
\membersection{wxString::MakeLower}\label{wxstringmakelower}
-\func{void}{MakeLower}{\void}
+\func{wxString\&}{MakeLower}{\void}
-Converts all characters to lower case.
+Converts all characters to lower case and returns the result.
\membersection{wxString::MakeUpper}\label{wxstringmakeupper}
-\func{void}{MakeUpper}{\void}
+\func{wxString\&}{MakeUpper}{\void}
-Converts all characters to upper case.
+Converts all characters to upper case and returns the result.
\membersection{wxString::Matches}\label{wxstringmatches}
\constfunc{bool}{Matches}{\param{const char*}{ szMask}}
-Returns TRUE if the string contents matches a mask containing '*' and '?'.
+Returns true if the string contents matches a mask containing '*' and '?'.
+
+\membersection{wxString::mb\_str}\label{wxstringmbstr}
+
+\constfunc{const char*}{mb\_str}{\param{wxMBConv\&}{ conv}}
+
+\constfunc{const wxCharBuffer}{mb\_str}{\param{wxMBConv\&}{ conv}}
+
+Returns multibyte (C string) representation of the string.
+In Unicode build, converts using \arg{conv}'s \helpref{cWC2MB}{wxmbconvcwc2mb}
+method and returns wxCharBuffer. In ANSI build, this function is same
+as \helpref{c\_str}{wxstringcstr}.
+The macro wxWX2MBbuf is defined as the correct return type (without const).
+
+\wxheading{See also}
+
+\helpref{wxMBConv}{wxmbconv},
+\helpref{c\_str}{wxstringcstr}, \helpref{wc\_str}{wxstringwcstr},
+\helpref{fn\_str}{wxstringfnstr}
\membersection{wxString::Mid}\label{wxstringmid}
\membersection{wxString::Pad}\label{wxstringpad}
-\func{wxString\&}{Pad}{\param{size\_t}{ count}, \param{char}{ pad = ' '}, \param{bool}{ fromRight = TRUE}}
+\func{wxString\&}{Pad}{\param{size\_t}{ count}, \param{char}{ pad = ' '}, \param{bool}{ fromRight = true}}
Adds {\it count} copies of {\it pad} to the beginning, or to the end of the string (the default).
Similar to the standard function {\it sprintf()}. Returns the number of
characters written, or an integer less than zero on error.
+Note that if {\tt wxUSE\_PRINTF\_POS\_PARAMS} is set to 1, then this function supports
+Unix98-style positional parameters:
+
+\begin{verbatim}
+ wxString str;
+
+ str.Printf(wxT("%d %d %d"), 1, 2, 3);
+ // str now contains "1 2 3"
+
+ str.Printf(wxT("%2$d %3$d %1$d"), 1, 2, 3);
+ // str now contains "2 3 1"
+\end{verbatim}
+
{\bf NB:} This function will use a safe version of {\it vsprintf()} (usually called
{\it vsnprintf()}) whenever available to always allocate the buffer of correct
size. Unfortunately, this function is not available on all platforms and the
\func{wxString\&}{Remove}{\param{size\_t}{ pos}, \param{size\_t}{ len}}
-Removes the last {\it len} characters from the string, starting at {\it pos}.
+Removes {\it len} characters from the string, starting at {\it pos}.
\membersection{wxString::RemoveLast}\label{wxstringremovelast}
\membersection{wxString::Replace}\label{wxstringreplace}
-\func{size\_t}{Replace}{\param{const char*}{ szOld}, \param{const char*}{ szNew}, \param{bool}{ replaceAll = TRUE}}
+\func{size\_t}{Replace}{\param{const char*}{ szOld}, \param{const char*}{ szNew}, \param{bool}{ replaceAll = true}}
-Replace first (or all) occurences of substring with another one.
+Replace first (or all) occurrences of substring with another one.
-{\it replaceAll}: global replace (default), or only the first occurence.
+{\it replaceAll}: global replace (default), or only the first occurrence.
Returns the number of replacements made.
Returns the last {\it count} characters.
-\constfunc{wxString}{Right}{\param{char}{ ch}}
-
-Returns all characters after the last occurence of {\it ch}.
-Returns the whole string if {\it ch} is not found.
-
\membersection{wxString::SetChar}\label{wxstringsetchar}
\func{void}{SetChar}{\param{size\_t}{ n}, \param{char}{ch}}
The same as Printf.
+\membersection{wxString::StartsWith}\label{wxstringstartswith}
+
+\constfunc{bool}{StartsWith}{\param{const wxChar }{*prefix}, \param{wxString }{*rest = NULL}}
+
+This function can be used to test if the string starts with the specified
+{\it prefix}. If it does, the function will return {\tt true} and put the rest
+of the string (i.e. after the prefix) into {\it rest} string if it is not
+{\tt NULL}. Otherwise, the function returns {\tt false} and doesn't modify the
+{\it rest}.
+
+\membersection{wxString::EndsWith}\label{wxstringendswith}
+
+\constfunc{bool}{EndsWith}{\param{const wxChar }{*suffix}, \param{wxString }{*rest = NULL}}
+
+This function can be used to test if the string ends with the specified
+{\it suffix}. If it does, the function will return {\tt true} and put the
+beginning of the string before the suffix into {\it rest} string if it is not
+{\tt NULL}. Otherwise, the function returns {\tt false} and doesn't
+modify the {\it rest}.
+
\membersection{wxString::Strip}\label{wxstringstrip}
\begin{verbatim}
\membersection{wxString::SubString}\label{wxstringsubstring}
-\constfunc{wxString}{SubString}{\param{size\_t}{ to}, \param{size\_t}{ from}}
+\constfunc{wxString}{SubString}{\param{size\_t}{ from}, \param{size\_t}{ to}}
+
+Deprecated, use \helpref{Mid}{wxstringmid} instead (but note that parameters
+have different meaning).
+
+Returns the part of the string between the indices {\it from} and {\it to}
+inclusive.
+
+\membersection{wxString::ToAscii}\label{wxstringtoascii}
+
+\constfunc{const char*}{ToAscii}{\void}
+
+Converts the string to an ASCII, 7-bit string (ANSI builds only).
+
+\constfunc{const wxCharBuffer}{ToAscii}{\void}
-Same as \helpref{Mid}{wxstringmid}.
+Converts the string to an ASCII, 7-bit string in the form of
+a wxCharBuffer (Unicode builds only).
+
+Note that this conversion only works if the string contains only ASCII
+characters. The \helpref{mb\_str}{wxstringmbstr} method provides more
+powerful means of converting wxString to C string.
+
+\membersection{wxString::ToDouble}\label{wxstringtodouble}
+
+\constfunc{bool}{ToDouble}{\param{double}{ *val}}
+
+Attempts to convert the string to a floating point number. Returns true on
+success (the number is stored in the location pointed to by {\it val}) or false
+if the string does not represent such number.
+
+\wxheading{See also}
+
+\helpref{wxString::ToLong}{wxstringtolong},\\
+\helpref{wxString::ToULong}{wxstringtoulong}
+
+\membersection{wxString::ToLong}\label{wxstringtolong}
+
+\constfunc{bool}{ToLong}{\param{long}{ *val}, \param{int }{base = $10$}}
+
+Attempts to convert the string to a signed integer in base {\it base}. Returns
+{\tt true} on success in which case the number is stored in the location
+pointed to by {\it val} or {\tt false} if the string does not represent a
+valid number in the given base.
+
+The value of {\it base} must be comprised between $2$ and $36$, inclusive, or
+be a special value $0$ which means that the usual rules of {\tt C} numbers are
+applied: if the number starts with {\tt 0x} it is considered to be in base
+$16$, if it starts with {\tt 0} - in base $8$ and in base $10$ otherwise. Note
+that you may not want to specify the base $0$ if you are parsing the numbers
+which may have leading zeroes as they can yield unexpected (to the user not
+familiar with C) results.
+
+\wxheading{See also}
+
+\helpref{wxString::ToDouble}{wxstringtodouble},\\
+\helpref{wxString::ToULong}{wxstringtoulong}
+
+\membersection{wxString::ToULong}\label{wxstringtoulong}
+
+\constfunc{bool}{ToULong}{\param{unsigned long}{ *val}, \param{int }{base = $10$}}
+
+Attempts to convert the string to an unsigned integer in base {\it base}.
+Returns {\tt true} on success in which case the number is stored in the
+location pointed to by {\it val} or {\tt false} if the string does not
+represent a valid number in the given base. Please notice that this function
+behaves in the same way as the standard \texttt{strtoul()} and so it simply
+converts negative numbers to unsigned representation instead of rejecting them
+(e.g. $-1$ is returned as \texttt{ULONG\_MAX}).
+
+See \helpref{wxString::ToLong}{wxstringtolong} for the more detailed
+description of the {\it base} parameter.
+
+\wxheading{See also}
+
+\helpref{wxString::ToDouble}{wxstringtodouble},\\
+\helpref{wxString::ToLong}{wxstringtolong}
\membersection{wxString::Trim}\label{wxstringtrim}
-\func{wxString\&}{Trim}{\param{bool}{ fromRight = TRUE}}
+\func{wxString\&}{Trim}{\param{bool}{ fromRight = true}}
-Removes spaces from the left or from the right (default).
+Removes white-space (space, tabs, form feed, newline and carriage return) from
+the left or from the right end of the string (right is default).
\membersection{wxString::Truncate}\label{wxstringtruncate}
\func{void}{UngetWriteBuf}{\void}
-Puts the string back into a reasonable state, after
+\func{void}{UngetWriteBuf}{\param{size\_t }{len}}
+
+Puts the string back into a reasonable state (in which it can be used
+normally), after
\rtfsp\helpref{wxString::GetWriteBuf}{wxstringgetwritebuf} was called.
+The version of the function without the {\it len} parameter will calculate the
+new string length itself assuming that the string is terminated by the first
+{\tt NUL} character in it while the second one will use the specified length
+and thus is the only version which should be used with the strings with
+embedded {\tt NUL}s (it is also slightly more efficient as {\tt strlen()}
+doesn't have to be called).
+
\membersection{wxString::Upper}\label{wxstringupper}
\constfunc{wxString}{Upper}{\void}
The same as MakeUpper.
+\membersection{wxString::wc\_str}\label{wxstringwcstr}
+
+\constfunc{const wchar\_t*}{wc\_str}{\param{wxMBConv\&}{ conv}}
+
+\constfunc{const wxWCharBuffer}{wc\_str}{\param{wxMBConv\&}{ conv}}
+
+Returns wide character representation of the string.
+In ANSI build, converts using \arg{conv}'s \helpref{cMB2WC}{wxmbconvcmb2wc}
+method and returns wxWCharBuffer. In Unicode build, this function is same
+as \helpref{c\_str}{wxstringcstr}.
+The macro wxWX2WCbuf is defined as the correct return type (without const).
+
+\wxheading{See also}
+
+\helpref{wxMBConv}{wxmbconv},
+\helpref{c\_str}{wxstringcstr}, \helpref{mb\_str}{wxstringwcstr},
+\helpref{fn\_str}{wxstringfnstr}
+
\membersection{wxString::operator!}\label{wxstringoperatornot}
\constfunc{bool}{operator!}{\void}
-Empty string is FALSE, so !string will only return TRUE if the string is empty.
-This allows the tests for NULLness of a {\it const char *} pointer and emptyness
+Empty string is false, so !string will only return true if the string is empty.
+This allows the tests for NULLness of a {\it const char *} pointer and emptiness
of the string to look the same in the code and makes it easier to port old code
to wxString.
Assignment: the effect of each operation is the same as for the corresponding
constructor (see \helpref{wxString constructors}{wxstringconstruct}).
-\membersection{operator wxString::$+$}\label{wxstringoperatorplus}
+\membersection{wxString::operator $+$}\label{wxstringoperatorplus}
-Concatenation: all these operators return a new strign equal to the sum of the
-operands.
+Concatenation: all these operators return a new string equal to the
+concatenation of the operands.
\func{wxString}{operator $+$}{\param{const wxString\&}{ x}, \param{const wxString\&}{ y}}
\membersection{wxString::operator []}\label{wxstringoperatorbracket}
-\func{char\&}{operator []}{\param{size\_t}{ i}}
+\func{wxChar\&}{operator []}{\param{size\_t}{ i}}
+
+\constfunc{wxChar}{operator []}{\param{size\_t}{ i}}
-\func{char}{operator []}{\param{size\_t}{ i}}
+\func{wxChar\&}{operator []}{\param{int}{ i}}
-\func{char}{operator []}{\param{int}{ i}}
+\constfunc{wxChar}{operator []}{\param{int}{ i}}
Element extraction.
These comparisons are case-sensitive.
+
+\section{\class{wxStringBuffer}}\label{wxstringbuffer}
+
+This tiny class allows to conveniently access the \helpref{wxString}{wxstring}
+internal buffer as a writable pointer without any risk of forgetting to restore
+the string to the usable state later.
+
+For example, assuming you have a low-level OS function called
+{\tt GetMeaningOfLifeAsString(char *)} returning the value in the provided
+buffer (which must be writable, of course) you might call it like this:
+
+\begin{verbatim}
+ wxString theAnswer;
+ GetMeaningOfLifeAsString(wxStringBuffer(theAnswer, 1024));
+ if ( theAnswer != "42" )
+ {
+ wxLogError("Something is very wrong!");
+ }
+\end{verbatim}
+
+Note that the exact usage of this depends on whether on not wxUSE\_STL is enabled. If
+wxUSE\_STL is enabled, wxStringBuffer creates a separate empty character buffer, and
+if wxUSE\_STL is disabled, it uses GetWriteBuf() from wxString, keeping the same buffer
+wxString uses intact. In other words, relying on wxStringBuffer containing the old
+wxString data is probably not a good idea if you want to build your program in both
+with and without wxUSE\_STL.
+
+\wxheading{Derived from}
+
+None
+
+\wxheading{Include files}
+
+<wx/string.h>
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
+\membersection{wxStringBuffer::wxStringBuffer}\label{wxstringbufferctor}
+
+\func{}{wxStringBuffer}{\param{const wxString\& }{str}, \param{size\_t }{len}}
+
+Constructs a writable string buffer object associated with the given string
+and containing enough space for at least {\it len} characters. Basically, this
+is equivalent to calling \helpref{GetWriteBuf}{wxstringgetwritebuf} and
+saving the result.
+
+\membersection{wxStringBuffer::\destruct{wxStringBuffer}}\label{wxstringbufferdtor}
+
+\func{}{\destruct{wxStringBuffer}}{\void}
+
+Restores the string passed to the constructor to the usable state by calling
+\helpref{UngetWriteBuf}{wxstringungetwritebuf} on it.
+
+\membersection{wxStringBuffer::operator wxChar *}\label{wxstringbufferwxchar}
+
+\func{wxChar *}{operator wxChar *}{\void}
+
+Returns the writable pointer to a buffer of the size at least equal to the
+length specified in the constructor.
+
+
+
+\section{\class{wxStringBufferLength}}\label{wxstringbufferlength}
+
+This tiny class allows to conveniently access the \helpref{wxString}{wxstring}
+internal buffer as a writable pointer without any risk of forgetting to restore
+the string to the usable state later, and allows the user to set the internal
+length of the string.
+
+For example, assuming you have a low-level OS function called
+{\tt int GetMeaningOfLifeAsString(char *)} copying the value in the provided
+buffer (which must be writable, of course), and returning the actual length
+of the string, you might call it like this:
+
+\begin{verbatim}
+ wxString theAnswer;
+ wxStringBuffer theAnswerBuffer(theAnswer, 1024);
+ int nLength = GetMeaningOfLifeAsString(theAnswerBuffer);
+ theAnswerBuffer.SetLength(nLength);
+ if ( theAnswer != "42" )
+ {
+ wxLogError("Something is very wrong!");
+ }
+\end{verbatim}
+
+Note that the exact usage of this depends on whether on not wxUSE\_STL is enabled. If
+wxUSE\_STL is enabled, wxStringBuffer creates a separate empty character buffer, and
+if wxUSE\_STL is disabled, it uses GetWriteBuf() from wxString, keeping the same buffer
+wxString uses intact. In other words, relying on wxStringBuffer containing the old
+wxString data is probably not a good idea if you want to build your program in both
+with and without wxUSE\_STL.
+
+Note that SetLength {\tt must} be called before wxStringBufferLength destructs.
+
+\wxheading{Derived from}
+
+None
+
+\wxheading{Include files}
+
+<wx/string.h>
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
+\membersection{wxStringBufferLength::wxStringBufferLength}\label{wxstringbufferlengthctor}
+
+\func{}{wxStringBufferLength}{\param{const wxString\& }{str}, \param{size\_t }{len}}
+
+Constructs a writable string buffer object associated with the given string
+and containing enough space for at least {\it len} characters. Basically, this
+is equivalent to calling \helpref{GetWriteBuf}{wxstringgetwritebuf} and
+saving the result.
+
+\membersection{wxStringBufferLength::\destruct{wxStringBufferLength}}\label{wxstringbufferlengthdtor}
+
+\func{}{\destruct{wxStringBufferLength}}{\void}
+
+Restores the string passed to the constructor to the usable state by calling
+\helpref{UngetWriteBuf}{wxstringungetwritebuf} on it.
+
+\membersection{wxStringBufferLength::SetLength}\label{wxstringbufferlengthsetlength}
+
+\func{void}{SetLength}{\param{size\_t }{nLength}}
+
+Sets the internal length of the string referred to by wxStringBufferLength to
+{\it nLength} characters.
+
+Must be called before wxStringBufferLength destructs.
+
+\membersection{wxStringBufferLength::operator wxChar *}\label{wxstringbufferlengthwxchar}
+
+\func{wxChar *}{operator wxChar *}{\void}
+
+Returns the writable pointer to a buffer of the size at least equal to the
+length specified in the constructor.
+
+