exit 1
fi
+if [ "$UID" != "0" ]; then
+ echo "-------------------------------------------------------"
+ echo " WARNING: will be unable to change ownership of files"
+ echo " unless this script is run as root or via sudo"
+ echo "-------------------------------------------------------"
+fi
+
#----------------------------------------------------------------------
# Check Parameters
echo ""
echo "optional command flags:"
echo " skiptar Don't unpack the tarball"
- echo " use_cvs Use the CVS workspace instead of a tarfile"
+ echo " inplace Don't use the tarball, build from the CVS tree instead"
+ echo " (The Docs and Demo tarballs are still required for a full build.)"
+ echo " unicode Make a unicode build"
echo " skipconfig Don't run configure"
echo " skipbuild Don't build wxWidgets or wxPython"
echo " skipinstall Don't do the installation step"
PYTHONW=${PYTHON}w
shift
+skiptar=no
+skipconfig=no
+skipbuild=no
+skipinstall=no
+skipdmg=no
+skipclean=no
+inplace=no
+unicode=no
for flag in $*; do
case ${flag} in
- skiptar) skiptar=1 ;;
- use_cvs) skiptar=1; use_cvs=1 ;;
- skipconfig) skipconfig=1; skiptar=1 ;;
- skipbuild) skipbuild=1; skipconfig=1; skiptar=1 ;;
- skipinstall) skipinstall=1 ;;
- skipdmg) skipdmg=1 ;;
- skipclean) skipclean=1 ;;
+ skiptar) skiptar=yes ;;
+ skipconfig) skipconfig=yes; skiptar=yes ;;
+ skipbuild) skipbuild=yes; skipconfig=yes; skiptar=yes ;;
+ skipinstall) skipinstall=yes ;;
+ skipdmg) skipdmg=yes ;;
+ skipclean) skipclean=yes ;;
+ inplace) inplace=yes; skiptar=yes ;;
+ unicode) unicode=yes ;;
*) echo "Unknown flag \"${flag}\""
usage
PYPREFIX=`$PYTHON -c "import sys; print sys.exec_prefix"`
PYLIB=$PYPREFIX/lib/python$PYVER
SITEPACKAGES=$PYLIB/site-packages
+SHORTVER=`echo $VERSION | cut -c 1,2,3`
+
+if [ $unicode == yes ]; then
+ CHARTYPE=unicode
+ UNICODEOPT=--enable-unicode
+ PYUNICODEOPT=1
+else
+ CHARTYPE=ansi
+ UNICODEOPT=--disable-unicode
+ PYUNICODEOPT=0
+fi
+
+#if [ "$HOSTNAME" = "bigmac.alldunn.com" ]; then
+# MAKEJOBS="--jobs=2"
+#fi
+
+
+if [ -z "$TARBALLDIR" ]; then
+ # this is a spot on my fileserver where the tarballs go, adjust
+ # as needed for where you put the wxPython tarball, or set
+ # TARBALLDIR before invoking this script...
+ TARBALLDIR=/stuff/Development/wxPython/dist/$VERSION
+fi
+TARBALL=$TARBALLDIR/wxPython-src-$VERSION.tar.gz
+
+if [ ! -e $TARBALLDIR/wxPython-demo-$VERSION.tar.gz ]; then
+ echo "-------------------------------------------------------"
+ echo " WARNING: Demo tarball not found, will skip building "
+ echo " the Demo app bundle and etc."
+ echo " $TARBALLDIR/wxPython-demo-$VERSION.tar.gz"
+ echo "-------------------------------------------------------"
+fi
+
+if [ ! -e $TARBALLDIR/wxPython-docs-$VERSION.tar.gz ]; then
+ echo "-------------------------------------------------------"
+ echo " WARNING: Docs tarball not found, will skip building "
+ echo " the the wxDocsViewer app bundle and etc."
+ echo " $TARBALLDIR/wxPython-docs-$VERSION.tar.gz"
+ echo "-------------------------------------------------------"
+fi
+
-TARBALLDIR=/stuff/Development/wxPython/dist/$VERSION
-TARBALL=$TARBALLDIR/wxPythonSrc-$VERSION.tar.gz
-PREFIX=/usr/lib/wxPython-$VERSION
-BINPREFIX=/usr/bin
+
+PREFIX=/usr/local/lib/wxPython-$CHARTYPE-$VERSION
+BINPREFIX=/usr/local/bin
WXROOT=`dirname $PWD`
PROGDIR="`dirname \"$0\"`"
TMPDIR=$PWD/_build_dmg
BUILDROOT=$TMPDIR/build
-INSTALLROOT=$TMPDIR/install
-INSTALLDEVEL=$TMPDIR/install-devel
+
+INSTALLROOT=$TMPDIR/install-root
+INSTALLAPPS=$TMPDIR/install-apps
+
DMGDIR=$TMPDIR/dmg
+DMGROOT=$DMGDIR/root
+DMGAPPS=$DMGDIR/apps
+
RESOURCEDIR=$PROGDIR/resources
DESTDIR=$PWD/dist
-SRCROOT=$BUILDROOT/wxPythonSrc-$VERSION
+SRCROOT=$BUILDROOT/wxPython-src-$VERSION
#----------------------------------------------------------------------
mkdir -p $BUILDROOT
mkdir -p $INSTALLROOT
-#mkdir -p $INSTALLDEVEL
+mkdir -p $INSTALLAPPS
+
rm -rf $DMGDIR
-mkdir -p $DMGDIR/root/Apps
-mkdir -p $DMGDIR/root/Docs
-mkdir -p $DMGDIR/root/Samples
+mkdir -p $DMGROOT
+mkdir -p $DMGAPPS/Docs
+mkdir -p $DMGAPPS/Samples
pushd $BUILDROOT
#----------------------------------------------------------------------
# Unpack the tarball
-if [ -z "$skiptar" ]; then
+if [ $skiptar != yes ]; then
echo Unarchiving tarball...
tar xzf $TARBALL
fi
-if [ "$use_cvs" = 1 ]; then
- # copy the cvs workspace, except for build dirs
-
- mkdir -p wxPythonSrc-$VERSION
-
- echo Finding updated files...
- if [ -e .last_copy ]; then
- FEXPR="-cnewer .last_copy"
- fi
- MEASURE=$WXROOT//
- find $WXROOT $FEXPR -print \
- | grep -v $WXROOT/bld \
- | grep -v wxPython/build \
- | grep -v wxPython/_build \
- | grep -v CVS \
- | grep -v .pyc \
- | cut -b ${#MEASURE}- > filelist
-
- for x in `cat filelist`; do
- if [ -d "$WXROOT/$x" ]; then
- mkdir -p "wxPythonSrc-$VERSION/$x"
- else
- echo $x
- cp -p "$WXROOT/$x" "wxPythonSrc-$VERSION/$x"
- fi
- done
+if [ $inplace = no ]; then
+ # make a build dir and cd to it.
+ cd wxPython-src-$VERSION
+ WXDIR=`pwd`
+ mkdir -p $WXDIR/bld
+ cd $WXDIR/bld
+ WXBLD=$WXDIR/bld
+else
- touch .last_copy
+ # If building "inplace" then our build dir will be off of the
+ # WXROOT like normal, adjust the variables to find things that
+ # way.
+ WXBLD=$WXROOT/build-$CHARTYPE
+ mkdir -p $WXBLD
+ cd $WXBLD
+ WXDIR=..
+ SRCROOT=$WXROOT
fi
-
-cd wxPythonSrc-$VERSION
-WXDIR=`pwd`
-mkdir -p $WXDIR/bld
-cd $WXDIR/bld
+echo "Using wx root dir: $WXROOT"
+echo "Using build dir: $WXBLD"
+echo "Using source tree: $WXDIR"
#----------------------------------------------------------------------
# Configure wxWidgets
-if [ -z "$skipconfig" ]; then
- ../configure \
+if [ $skipconfig != yes ]; then
+ $WXDIR/configure \
--prefix=$PREFIX \
--with-mac \
- --disable-monolithic \
+ --enable-monolithic \
--with-opengl \
--enable-sound \
--enable-display \
--enable-geometry \
+ --enable-debug_flag \
--enable-precomp=no \
- --enable-debug_flag
+ --enable-optimise \
+ $UNICODEOPT
-## --enable-optimise \
-## --with-libjpeg=builtin \
-## --with-libpng=builtin \
-## --with-libtiff=builtin \
-## --with-zlib=builtin \
fi
# Build wxWidgets and wxPython
-if [ -z "$skipbuild" ]; then
+if [ $skipbuild != yes ]; then
# Make wxWidgets and some contribs
- make
- make -C contrib/src/gizmos
- make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0"
- make -C contrib/src/stc
- make -C contrib/src/xrc
-
- if [ ! -e $WXDIR/include/wx/gizmos ]; then
- # Make some links so the wxPython build can find all the headers it needs
- pushd $WXDIR/include/wx
- ln -s ../../contrib/include/wx/* .
- popd
+
+ # For some reason Rez and DeRez have started locking up if run as
+ # root, figure out why, but in the meantime...
+ if [ "$UID" = "0" ]; then
+ chmod a+w lib
+ if [ "$CHARTYPE" = "ansi" ]; then
+ su robind -c "make lib/libwx_macd-2.5.3.r"
+ else
+ su robind -c "make lib/libwx_macud-2.5.3.r"
+ fi
fi
+ make $MAKEJOBS
+ make $MAKEJOBS -C contrib/src/gizmos
+ make $MAKEJOBS -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0"
+ make $MAKEJOBS -C contrib/src/stc
+
# Build wxPython
- cd $WXDIR/wxPython
+ cd $WXROOT/wxPython
$PYTHON setup.py \
+ UNICODE=$PYUNICODEOPT \
NO_SCRIPTS=1 \
- WX_CONFIG="$WXDIR/bld/wx-config --prefix=$WXDIR --exec-prefix=$WXDIR/bld" \
+ EP_ADD_OPTS=1 \
+ WX_CONFIG="$WXBLD/wx-config --inplace" \
+ BUILD_BASE=$WXBLD/wxPython \
build
-
-
- # Build wxrc (XRC resource tool)
- cd $WXDIR/bld/contrib/utils/wxrc
- make
- strip wxrc
-
fi
#----------------------------------------------------------------------
-if [ -z "$skipinstall" ]; then
+if [ $skipinstall != yes ]; then
# Install wxWidgets
- cd $WXDIR/bld
+ cd $WXBLD
make prefix=$INSTALLROOT$PREFIX install
make -C contrib/src/gizmos prefix=$INSTALLROOT$PREFIX install
make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0" prefix=$INSTALLROOT/$PREFIX install
make -C contrib/src/stc prefix=$INSTALLROOT$PREFIX install
- make -C contrib/src/xrc prefix=$INSTALLROOT$PREFIX install
+ # relink wx-config with a relative link
+ cd $INSTALLROOT$PREFIX/bin
+ rm wx-config
+ ln -s ../lib/wx/config/* wx-config
+
# and wxPython
- cd $WXDIR/wxPython
+ cd $WXROOT/wxPython
$PYTHON setup.py \
+ UNICODE=$PYUNICODEOPT \
NO_SCRIPTS=1 \
+ EP_ADD_OPTS=1 \
WX_CONFIG="$INSTALLROOT/$PREFIX/bin/wx-config --prefix=$INSTALLROOT/$PREFIX" \
+ BUILD_BASE=$WXBLD/wxPython \
install \
--root=$INSTALLROOT
# /Library/Python/$PYVER so we need to move the files so they are
# installed in the physical location, not the virtual one.
if [ "$KIND" = "panther" ]; then
+ if [ -e $INSTALLROOT/Library/Python/$PYVER ]; then
+ rm -r $INSTALLROOT/Library/Python/$PYVER
+ fi
mkdir -p $INSTALLROOT/Library/Python/$PYVER
mv $INSTALLROOT/$SITEPACKAGES/* $INSTALLROOT/Library/Python/$PYVER
rm -r $INSTALLROOT/System
SITEPACKAGES=/Library/Python/$PYVER
fi
-
# install wxPython's tool scripts
mkdir -p $INSTALLROOT$BINPREFIX
- cd $WXDIR/wxPython/scripts
+ cd $WXROOT/wxPython/scripts
python$PYVER CreateMacScripts.py $INSTALLROOT $BINPREFIX
- # Install wxrc
- cp $WXDIR/bld/contrib/utils/wxrc/wxrc $INSTALLROOT$BINPREFIX
-
-
- # install the wxPython headers
- cd $WXDIR/wxPython
- cp -R include $INSTALLROOT$PREFIX
- mkdir -p $INSTALLROOT$PREFIX/include/wx/wxPython/i_files
- cp src/*.i $INSTALLROOT$PREFIX/include/wx/wxPython/i_files
+ # Remove the .pyc/.pyo files they just take up space and can be recreated
+ # during the install.
+ pushd $WXROOT/wxPython
+ $PYTHON $PROGDIR/../zappycfiles.py $INSTALLROOT > /dev/null
+ popd
+ # Set premissions for files in $INSTALLROOT
+ if [ "$UID" = "0" ]; then
+ chown -R root:admin $INSTALLROOT
+ chmod -R g+w $INSTALLROOT
+ fi
+fi
- # Set premissions for files in $INSTALLROOT
- chown -R root:admin $INSTALLROOT
- chmod -R g+w $INSTALLROOT
+if [ "$KIND" = "panther" ]; then
+ SITEPACKAGES=/Library/Python/$PYVER
fi
+PKGDIR=`cat $INSTALLROOT$SITEPACKAGES/wx.pth`
popd
#----------------------------------------------------------------------
# Make the Installer packages and disk image
-if [ -z "$skipdmg" ]; then
-
- # Remove the .pyc/.pyo files they just take up space and can be recreated
- # during the install.
- $PYTHON $PROGDIR/../zappycfiles.py $INSTALLROOT
+if [ $skipdmg != yes ]; then
+ #-----------------------------------------------
+ # The main runtime installer package
# Make the welcome message
case $KIND in
panther) W_MSG="the Panther (OS X 10.3.x) version of" ;;
jaguar) W_MSG="the Jaguar (OS X 10.2.x) version of" ;;
esac
+
+
cat > $RESOURCEDIR/Welcome.txt <<EOF
Welcome!
-This program will install wxPython $VERSION for $W_MSG MacPython-OSX $PYVER.
+This Installer package will install the wxPython $CHARTYPE runtime $VERSION for $W_MSG MacPython-OSX $PYVER. This includes:
-You must install onto your current boot disk, even though the installer does not enforce this, otherwise things will not work.
+ * The wxPython packages and modules
+ * The wxWidgets shared libraries and headers
+ * Some command line tool scripts, installed to /usr/local/bin.
+
+You must install onto your current boot disk, eventhough the installer does not enforce this, otherwise things will not work.
+
+You can install more than one version of the wxPython runtime if you desire. The most recently installed version will be the default wxPython, but you can choose another by setting the PYTHONPATH or by using the wxversion module. See http://wiki.wxpython.org/index.cgi/MultiVersionInstalls for more details.
Build date: `date`
EOF
# Cleanup any old install of the wxPython package
rm -rf \$2$SITEPACKAGES/wxPython
rm -rf \$2$SITEPACKAGES/wx
+rm -rf \$2$SITEPACKAGES/$PKGDIR
exit 0
EOF
chmod +x $RESOURCEDIR/preflight
cat > $RESOURCEDIR/postflight <<EOF
#!/bin/sh -e
# Compile the .py files in the wxPython pacakge
-$PYTHON \$2$PYLIB/compileall.py \$2$SITEPACKAGES/wxPython
-$PYTHON \$2$PYLIB/compileall.py \$2$SITEPACKAGES/wx
-$PYTHON -O \$2$PYLIB/compileall.py \$2$SITEPACKAGES/wxPython
-$PYTHON -O \$2$PYLIB/compileall.py \$2$SITEPACKAGES/wx
-
+$PYTHON \$2$PYLIB/compileall.py \$2$SITEPACKAGES/$PKGDIR
+$PYTHON -O \$2$PYLIB/compileall.py \$2$SITEPACKAGES/$PKGDIR
# and all of the wxPython pacakge should be group writable
-chgrp -R admin \$2$SITEPACKAGES/wxPython
-chmod -R g+w \$2$SITEPACKAGES/wxPython
-chgrp -R admin \$2$SITEPACKAGES/wx
-chmod -R g+w \$2$SITEPACKAGES/wx
+chgrp -R admin \$2$SITEPACKAGES/$PKGDIR
+chmod -R g+w \$2$SITEPACKAGES/$PKGDIR
exit 0
EOF
chmod +x $RESOURCEDIR/postflight
-
+
# Build the main Installer Package...
- rm -rf wxPythonOSX-$KIND.pkg
+ rm -rf wxPython${SHORTVER}-osx-$CHARTYPE-$KIND.pkg
python $PROGDIR/../buildpkg.py \
- --Title=wxPythonOSX-$KIND \
+ --Title=wxPython${SHORTVER}-osx-$CHARTYPE-$KIND \
--Version=$VERSION \
- --Description="wxPython $VERSION for $W_MSG MacPython-OSX $PYVER" \
+ --Description="wxPython $CHARTYPE runtime $VERSION for $W_MSG MacPython-OSX $PYVER" \
--NeedsAuthorization="YES" \
--Relocatable="NO" \
--InstallOnly="YES" \
$INSTALLROOT \
$RESOURCEDIR
- mv wxPythonOSX-$KIND.pkg $DMGDIR/root
+ mv wxPython${SHORTVER}-osx-$CHARTYPE-$KIND.pkg $DMGROOT
+ rm $RESOURCEDIR/postflight
+ rm $RESOURCEDIR/preflight
+ rm $RESOURCEDIR/Welcome.txt
- # Make a README.txt to go on the disk image
- cat > "$DMGDIR/root/README 1st.txt" <<EOF
+ #-----------------------------------------------
+ # Make a README to go on the disk image
+ cat > "$DMGROOT/README 1st.txt" <<EOF
Welcome to wxPython!
-On this disk image you will find the installer for wxPython $VERSION for $W_MSG MacPython-OSX $PYVER. MacPython-OSX is not included.
+This disk image contains the following items:
+
+ wxPython${SHORTVER}-osx-$CHARTYPE-$VERSION-$KIND
+
+ This Installer contains the wxPython runtime, compiled on a
+ $KIND OS X system, using the $CHARTYPE build of the wxWidgets
+ library. It includes the Python modules and extension
+ modules, as well as the wxWidgets libraries.
+
+ It is possible to have more than one version of the runtime
+ installed at once if you wish. The most recently installed
+ version will be the default wxPython, but you can choose
+ another by setting the PYTHONPATH or by using the wxversion
+ module. For more details see:
+ http://wiki.wxpython.org/index.cgi/MultiVersionInstalls
+
+
+ uninstall_wxPython.py
+
+ A simple tool to help you manage your installed versions of
+ wxPython. It will allow you to choose from the currently
+ installed wxPython packages and to select one for
+ uninstallation. It is a text-mode tool so you can either run
+ it from a Terminal command line, or you can open it with
+ PythonLauncher and let it create a Terminal to run it in.
+
+ NOTE: If you have versions prior to 2.5.3.1 installed, please
+ do run this uninstall tool to remove the older version.
+
+EOF
+
+
- wxPython-$KIND.pkg The installer package. It contains the wxPython
- extension modules, wxMac dynamic libraries and
- headers, and some scripts for the command-line
- tools.
+ cp $PROGDIR/../uninstall_wxPython.py $DMGROOT
-Everything else here is optional and you can drag them out of the disk
-image and drop them whereever you want. You do need to install the above
-package before you can use any of the items below.
+ #-----------------------------------------------
+ # Make a disk image to hold these files
+ dmgname=wxPython${SHORTVER}-osx-$CHARTYPE-$VERSION-$KIND-py$PYVER
+ $PROGDIR/../makedmg $DMGROOT $DMGDIR $dmgname
- Apps/wxPython Demo An application bundle version of the demo.
- (This has it's own copy of the sources within
- the bundle.)
+ echo Moving $DMGDIR/$dmgname.dmg to $DESTDIR
+ mv $DMGDIR/$dmgname.dmg $DESTDIR
- Apps/XRCed An application for editing wxPython resource
+
+#---------------------------------------------------------------------------
+# Now create app bundles for the demo, docs, and tools and make another
+# disk image to hold it all.
+#---------------------------------------------------------------------------
+
+ cat > "$DMGAPPS/README 1st.txt" <<EOF
+Welcome to wxPython!
+
+On this disk image you will find Demo, Tools, Docs, and etc. for
+wxPython $VERSION. Everything here is optional and you can drag them
+out of the disk image and drop them wherever you want. You will need
+to have an installed wxPython runtime to be able to use any of them.
+
+
+ wxPython Demo An application bundle version of the demo.
+ (This has it's own copy of the demo sources
+ within the bundle.)
+
+ XRCed An application for editing wxPython resource
files (XRC files.)
- Apps/PyCrust An application that provides an interactive
+ PyCrust An application that provides an interactive
Python shell and also namespace inspectors.
- Docs/wxDocs A folder containing the wxWidgets documentation
- bundled in .zip files, and a small wxPython
- application that can be used to view the docs.
- Just run viewer.pyw.
+ Docs/wxDocsViewer An application that allows you to view the
+ wxWidgets documentation.
Docs/licence License files.
- Docs/other A few readmes, change log, etc. The full
- documentation is downloadable separately.
+ Docs/other A few readmes, change log, etc.
- Samples/samples Several small sample applications that
+ Samples/samples Several small sample applications that
demonstrate how to use wxPython.
- Samples/demo A copy of the wxPython demo source code,
+ Samples/demo A copy of the wxPython demo source code,
just open the folder and run demo.pyw.
Happy Hacking!
EOF
-# PyAlaMode An extension of PyCrust that includes source
+# PyAlaMode An extension of PyCrust that includes source
# file editing capabilities.
# wxDocs
- pushd $DMGDIR/root/Docs
- tar xzvf $TARBALLDIR/wxPythonDocs-$VERSION.tar.gz
- mv wxPython-$VERSION/docs wxDocs
- rm -r wxPython-$VERSION
- mv wxDocs/viewdocs.py wxDocs/viewdocs.pyw
+ if [ ! -e $TARBALLDIR/wxPython-docs-$VERSION.tar.gz ]; then
+ cat > "$DMGAPPS/Docs/Build ERROR.txt" <<EOF
+
+The wxPython-docs tarball was not found when building this disk image!
+
+EOF
+
+ else
+ pushd $BUILDROOT
+ tar xzvf $TARBALLDIR/wxPython-docs-$VERSION.tar.gz
+ popd
+
+ # Make an app to launch viewdocs.py
+ $PYTHONW $PROGDIR/../buildapp.py \
+ --builddir=$DMGAPPS/Docs \
+ --name=wxDocsViewer \
+ --mainprogram=$BUILDROOT/wxPython-$VERSION/docs/viewdocs.py \
+ --iconfile=$PROGDIR/Info.icns \
+ build
+
+ cp $BUILDROOT/wxPython-$VERSION/docs/*.zip $DMGAPPS/Docs/wxDocsViewer.app/Contents/Resources
+
+ cat > "$DMGAPPS/Docs/README 1st.txt" <<EOF
+
+The wxDocsViewer application needs to be copied to your Desktop (or
+someplace else you have write access to) before you can run it, so it
+can cache some indexes within its bundle.
+
+EOF
+
+ fi
# license files, docs, etc.
+ pushd $DMGAPPS/Docs
cp -pR $SRCROOT/wxPython/licence .
cp -pR $SRCROOT/wxPython/docs .
rm -rf docs/bin
rm -rf docs/xml-raw
mv docs other
popd
-
- # Copy the demo and samples to the disk image from the tarball
- pushd $DMGDIR/root/Samples
- tar xzvf $TARBALLDIR/wxPythonDemo-$VERSION.tar.gz
- mv wxPython-$VERSION/* .
- rm -rf wxPython-$VERSION
- rm demo/b demo/.setup.sh
- mv demo/demo.py demo/demo.pyw
- popd
-
+
+
+ if [ ! -e $TARBALLDIR/wxPython-demo-$VERSION.tar.gz ]; then
+ cat > "$DMGAPPS/Samples/Build ERROR.txt" <<EOF
+
+The wxPython-demo tarball was not found when building this disk image!
+
+EOF
+ cp "$DMGAPPS/Samples/Build ERROR.txt" $DMGAPPS
+
+ else
+
+ # Copy the demo and samples to the disk image from the tarball
+ pushd $DMGAPPS/Samples
+ tar xzvf $TARBALLDIR/wxPython-demo-$VERSION.tar.gz
+ mv wxPython-$VERSION/* .
+ rm -rf wxPython-$VERSION
+ rm demo/b demo/.setup.sh
+ mv demo/demo.py demo/demo.pyw
+ popd
+
+ # Make an app bundle to run the demo
+ $PYTHONW $PROGDIR/../buildapp.py \
+ --builddir=$DMGAPPS \
+ --name="wxPython Demo" \
+ --mainprogram=$DMGAPPS/Samples/demo/demo.pyw \
+ --iconfile=$PROGDIR/RunDemo.icns \
+ build
+ cp -pR $DMGAPPS/Samples/demo/* "$DMGAPPS/wxPython Demo.app/Contents/Resources"
+ fi
+
# Make an app bundle to launch PyCrust
$PYTHONW $PROGDIR/../buildapp.py \
- --builddir=$DMGDIR/root/Apps \
+ --builddir=$DMGAPPS \
--name=PyCrust \
--mainprogram=$INSTALLROOT$BINPREFIX/pycrust.py \
--iconfile=$PROGDIR/PieShell.icns \
build
-# # and PyAlaMode
-# $PYTHONW $PROGDIR/../buildapp.py \
-# --builddir=$DMGDIR/root \
-# --name=PyAlaMode \
-# --mainprogram=$INSTALLROOT$BINPREFIX/pyalamode.py \
-# --iconfile=$PROGDIR/PieShell.icns \
-# build
+## TODO: PyAlaMode needs tweaked to be able to run from a bundle. It
+## needs to know to ignore command line parameters and etc...
+# # and PyAlaMode
+# $PYTHONW $PROGDIR/../buildapp.py \
+# --builddir=$DMGAPPS \
+# --name=PyAlaMode \
+# --mainprogram=$INSTALLROOT$BINPREFIX/pyalamode.py \
+# --iconfile=$PROGDIR/PieShell.icns \
+# build
# Make an app to launch XRCed
$PYTHONW $PROGDIR/../buildapp.py \
- --builddir=$DMGDIR/root/Apps \
+ --builddir=$DMGAPPS \
--name=XRCed \
--mainprogram=$INSTALLROOT$BINPREFIX/xrced.py \
--iconfile=$PROGDIR/XRCed.icns \
build
- # Make an app bundle to run the demo
- $PYTHONW $PROGDIR/../buildapp.py \
- --builddir=$DMGDIR/root/Apps \
- --name="wxPython Demo" \
- --mainprogram=$DMGDIR/root/Samples/demo/demo.pyw \
- --iconfile=$PROGDIR/RunDemo.icns \
- build
- cp -pR $DMGDIR/root/Samples/demo/* "$DMGDIR/root/Apps/wxPython Demo.app/Contents/Resources"
-
- # and then finally make a disk image containing the packages and etc.
- $PROGDIR/../makedmg $DMGDIR/root $DMGDIR wxPythonOSX-$VERSION-$KIND-Py$PYVER
- echo Moving $DMGDIR/wxPythonOSX-$VERSION-$KIND-Py$PYVER.dmg to $DESTDIR
- mv $DMGDIR/wxPythonOSX-$VERSION-$KIND-Py$PYVER.dmg $DESTDIR
+ # and then finally make a disk image containing everything
+ dmgname=wxPython${SHORTVER}-osx-docs-demos-$VERSION
+ $PROGDIR/../makedmg $DMGAPPS $DMGDIR $dmgname
+
+ echo Moving $DMGDIR/$dmgname.dmg to $DESTDIR
+ mv $DMGDIR/$dmgname.dmg $DESTDIR
fi
# Cleanup build/install dirs
-if [ -z "$skipclean" ]; then
+if [ $skipclean != yes ]; then
echo "Cleaning up..."
rm -rf $TMPDIR
else
projects / wxWidgets.git / blobdiff