added possibility to throw different objects and crash directly from the main frame...

[wxWidgets.git] / src / zlib / algorithm.txt

diff --git a/src/zlib/algorithm.txt b/src/zlib/algorithm.txt
index cdc830b5deb8fbbcd41b653db1bb078d95854776..b022dde312a1139fde1d9c0ec90c9640108d9645 100644 (file)
--- a/src/zlib/algorithm.txt
+++ b/src/zlib/algorithm.txt
@@ -59,10 +59,10 @@ but saves time since there are both fewer insertions and fewer searches.
 
 2.1 Introduction
 
 
 2.1 Introduction
 

-The real question is, given a Huffman tree, how to decode fast.  The most
-important realization is that shorter codes are much more common than
-longer codes, so pay attention to decoding the short codes fast, and let
-the long codes take longer to decode.
+The key question is how to represent a Huffman code (or any prefix code) so
+that you can decode fast.  The most important characteristic is that shorter
+codes are much more common than longer codes, so pay attention to decoding the
+short codes fast, and let the long codes take longer to decode.

 
 inflate() sets up a first level table that covers some number of bits of
 input less than the length of longest code.  It gets that many bits from the
 
 inflate() sets up a first level table that covers some number of bits of
 input less than the length of longest code.  It gets that many bits from the


@@ -77,58 +77,54 @@ table took no time (and if you had infinite memory), then there would only
 be a first level table to cover all the way to the longest code.  However,
 building the table ends up taking a lot longer for more bits since short
 codes are replicated many times in such a table.  What inflate() does is
 be a first level table to cover all the way to the longest code.  However,
 building the table ends up taking a lot longer for more bits since short
 codes are replicated many times in such a table.  What inflate() does is

-simply to make the number of bits in the first table a variable, and set it
-for the maximum speed.
-
-inflate() sends new trees relatively often, so it is possibly set for a
-smaller first level table than an application that has only one tree for
-all the data.  For inflate, which has 286 possible codes for the
-literal/length tree, the size of the first table is nine bits.  Also the
-distance trees have 30 possible values, and the size of the first table is
-six bits.  Note that for each of those cases, the table ended up one bit
-longer than the ``average'' code length, i.e. the code length of an
-approximately flat code which would be a little more than eight bits for
-286 symbols and a little less than five bits for 30 symbols.  It would be
-interesting to see if optimizing the first level table for other
-applications gave values within a bit or two of the flat code size.
+simply to make the number of bits in the first table a variable, and  then
+to set that variable for the maximum speed.
+
+For inflate, which has 286 possible codes for the literal/length tree, the size
+of the first table is nine bits.  Also the distance trees have 30 possible
+values, and the size of the first table is six bits.  Note that for each of
+those cases, the table ended up one bit longer than the ``average'' code
+length, i.e. the code length of an approximately flat code which would be a
+little more than eight bits for 286 symbols and a little less than five bits
+for 30 symbols.

 
 
 2.2 More details on the inflate table lookup
 
 
 
 2.2 More details on the inflate table lookup
 

-Ok, you want to know what this cleverly obfuscated inflate tree actually  
-looks like.  You are correct that it's not a Huffman tree.  It is simply a  
-lookup table for the first, let's say, nine bits of a Huffman symbol.  The  
-symbol could be as short as one bit or as long as 15 bits.  If a particular  
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like.  You are correct that it's not a Huffman tree.  It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol.  The
+symbol could be as short as one bit or as long as 15 bits.  If a particular

 symbol is shorter than nine bits, then that symbol's translation is duplicated
 symbol is shorter than nine bits, then that symbol's translation is duplicated

-in all those entries that start with that symbol's bits.  For example, if the  
-symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a  
+in all those entries that start with that symbol's bits.  For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a

 symbol is nine bits long, it appears in the table once.
 
 symbol is nine bits long, it appears in the table once.
 

-If the symbol is longer than nine bits, then that entry in the table points  
-to another similar table for the remaining bits.  Again, there are duplicated  
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits.  Again, there are duplicated

 entries as needed.  The idea is that most of the time the symbol will be short
 entries as needed.  The idea is that most of the time the symbol will be short

-and there will only be one table look up.  (That's whole idea behind data  
-compression in the first place.)  For the less frequent long symbols, there  
-will be two lookups.  If you had a compression method with really long  
-symbols, you could have as many levels of lookups as is efficient.  For  
+and there will only be one table look up.  (That's whole idea behind data
+compression in the first place.)  For the less frequent long symbols, there
+will be two lookups.  If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient.  For

 inflate, two is enough.
 
 inflate, two is enough.
 

-So a table entry either points to another table (in which case nine bits in  
-the above example are gobbled), or it contains the translation for the symbol  
-and the number of bits to gobble.  Then you start again with the next  
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble.  Then you start again with the next

 ungobbled bit.
 
 ungobbled bit.
 

-You may wonder: why not just have one lookup table for how ever many bits the  
-longest symbol is?  The reason is that if you do that, you end up spending  
-more time filling in duplicate symbol entries than you do actually decoding.   
-At least for deflate's output that generates new trees every several 10's of  
-kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code  
-would take too long if you're only decoding several thousand symbols.  At the  
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is?  The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols.  At the

 other extreme, you could make a new table for every bit in the code.  In fact,
 other extreme, you could make a new table for every bit in the code.  In fact,

-that's essentially a Huffman tree.  But then you spend two much time  
+that's essentially a Huffman tree.  But then you spend two much time

 traversing the tree while decoding, even for short symbols.
 
 traversing the tree while decoding, even for short symbols.
 

-So the number of bits for the first lookup table is a trade of the time to  
+So the number of bits for the first lookup table is a trade of the time to

 fill out the table vs. the time spent looking at the second level and above of
 the table.
 
 fill out the table vs. the time spent looking at the second level and above of
 the table.
 


@@ -158,7 +154,7 @@ Let's make the first table three bits long (eight entries):
 110: -> table X (gobble 3 bits)
 111: -> table Y (gobble 3 bits)
 
 110: -> table X (gobble 3 bits)
 111: -> table Y (gobble 3 bits)
 

-Each entry is what the bits decode to and how many bits that is, i.e. how  
+Each entry is what the bits decode as and how many bits that is, i.e. how

 many bits to gobble.  Or the entry points to another table, with the number of
 bits to gobble implicit in the size of the table.
 
 many bits to gobble.  Or the entry points to another table, with the number of
 bits to gobble implicit in the size of the table.
 


@@ -170,7 +166,7 @@ long:
 10: D,2
 11: E,2
 
 10: D,2
 11: E,2
 

-Table Y is three bits long since the longest code starting with 111 is six  
+Table Y is three bits long since the longest code starting with 111 is six

 bits long:
 
 000: F,2
 bits long:
 
 000: F,2


@@ -182,20 +178,20 @@ bits long:
 110: I,3
 111: J,3
 
 110: I,3
 111: J,3
 

-So what we have here are three tables with a total of 20 entries that had to  
-be constructed.  That's compared to 64 entries for a single table.  Or  
-compared to 16 entries for a Huffman tree (six two entry tables and one four  
-entry table).  Assuming that the code ideally represents the probability of  
+So what we have here are three tables with a total of 20 entries that had to
+be constructed.  That's compared to 64 entries for a single table.  Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table).  Assuming that the code ideally represents the probability of

 the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
 the symbols, it takes on the average 1.25 lookups per symbol.  That's compared

-to one lookup for the single table, or 1.66 lookups per symbol for the  
+to one lookup for the single table, or 1.66 lookups per symbol for the

 Huffman tree.
 
 Huffman tree.
 

-There, I think that gives you a picture of what's going on.  For inflate, the  
-meaning of a particular symbol is often more than just a letter.  It can be a  
-byte (a "literal"), or it can be either a length or a distance which  
-indicates a base value and a number of bits to fetch after the code that is  
-added to the base value.  Or it might be the special end-of-block code.  The  
-data structures created in inftrees.c try to encode all that information  
+There, I think that gives you a picture of what's going on.  For inflate, the
+meaning of a particular symbol is often more than just a letter.  It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value.  Or it might be the special end-of-block code.  The
+data structures created in inftrees.c try to encode all that information

 compactly in the tables.
 
 
 compactly in the tables.
 
 


@@ -210,4 +206,4 @@ Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
 pp. 337-343.
 
 ``DEFLATE Compressed Data Format Specification'' available in
 pp. 337-343.
 
 ``DEFLATE Compressed Data Format Specification'' available in

-ftp://ds.internic.net/rfc/rfc1951.txt
+http://www.ietf.org/rfc/rfc1951.txt