\setheader{{\it CHAPTER \thechapter}}{}{}{}{}{{\it CHAPTER \thechapter}}%
\setfooter{\thepage}{}{}{}{}{\thepage}
-The functions defined in wxWindows are described here.
+The functions and macros defined in wxWindows are described here: you can
+either look up a function using the alphabetical listing of them or find it in
+the corresponding topic.
+
+\section{Alphabetical functions and macros list}
+
+\helpref{CLASSINFO}{classinfo}\\
+\helpref{copystring}{copystring}\\
+\helpref{DECLARE\_ABSTRACT\_CLASS}{declareabstractclass}\\
+\helpref{DECLARE\_APP}{declareapp}\\
+\helpref{DECLARE\_CLASS}{declareclass}\\
+\helpref{DECLARE\_DYNAMIC\_CLASS}{declaredynamicclass}\\
+\helpref{IMPLEMENT\_ABSTRACT\_CLASS2}{implementabstractclass2}\\
+\helpref{IMPLEMENT\_ABSTRACT\_CLASS}{implementabstractclass}\\
+\helpref{IMPLEMENT\_APP}{implementapp}\\
+\helpref{IMPLEMENT\_CLASS2}{implementclass2}\\
+\helpref{IMPLEMENT\_CLASS}{implementclass}\\
+\helpref{IMPLEMENT\_DYNAMIC\_CLASS2}{implementdynamicclass2}\\
+\helpref{IMPLEMENT\_DYNAMIC\_CLASS}{implementdynamicclass}\\
+\helpref{WXDEBUG\_NEW}{debugnew}\\
+\helpref{WXTRACELEVEL}{tracelevel}\\
+\helpref{WXTRACE}{trace}\\
+\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}\\
+\helpref{wxASSERT\_MSG}{wxassertmsg}\\
+\helpref{wxASSERT}{wxassert}\\
+\helpref{wxBITMAP}{wxbitmapmacro}\\
+\helpref{wxBeginBusyCursor}{wxbeginbusycursor}\\
+\helpref{wxBell}{wxbell}\\
+\helpref{wxCHECK2\_MSG}{wxcheck2msg}\\
+\helpref{wxCHECK2}{wxcheck2}\\
+\helpref{wxCHECK\_MSG}{wxcheckmsg}\\
+\helpref{wxCHECK\_RET}{wxcheckret}\\
+\helpref{wxCHECK\_VERSION}{wxcheckversion}\\
+\helpref{wxCHECK}{wxcheck}\\
+\helpref{wxClientDisplayRect}{wxclientdisplayrect}\\
+\helpref{wxClipboardOpen}{wxclipboardopen}\\
+\helpref{wxCloseClipboard}{wxcloseclipboard}\\
+\helpref{wxColourDisplay}{wxcolourdisplay}\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}\\
+\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2}\\
+\helpref{wxConcatFiles}{wxconcatfiles}\\
+\helpref{wxConstCast}{wxconstcast}\\
+\helpref{wxCopyFile}{wxcopyfile}\\
+\helpref{wxCreateDynamicObject}{wxcreatedynamicobject}\\
+\helpref{wxCreateFileTipProvider}{wxcreatefiletipprovider}\\
+\helpref{wxDDECleanUp}{wxddecleanup}\\
+\helpref{wxDDEInitialize}{wxddeinitialize}\\
+\helpref{wxDROP\_ICON}{wxdropicon}\\
+\helpref{wxDebugMsg}{wxdebugmsg}\\
+\helpref{wxDirExists}{wxdirexists}\\
+\helpref{wxDirSelector}{wxdirselector}\\
+\helpref{wxDisplayDepth}{wxdisplaydepth}\\
+\helpref{wxDisplaySizeMM}{wxdisplaysizemm}\\
+\helpref{wxDisplaySize}{wxdisplaysize}\\
+\helpref{wxDisplaySize}{wxdisplaysize}\\
+\helpref{wxDos2UnixFilename}{wxdos2unixfilename}\\
+\helpref{wxDynamicCastThis}{wxdynamiccastthis}\\
+\helpref{wxDynamicCast}{wxdynamiccast}\\
+\helpref{wxEmptyClipboard}{wxemptyclipboard}\\
+\helpref{wxEnableTopLevelWindows}{wxenabletoplevelwindows}\\
+\helpref{wxEndBusyCursor}{wxendbusycursor}\\
+\helpref{wxEntry}{wxentry}\\
+\helpref{wxEnumClipboardFormats}{wxenumclipboardformats}\\
+\helpref{wxError}{wxerror}\\
+\helpref{wxExecute}{wxexecute}\\
+\helpref{wxExit}{wxexit}\\
+\helpref{wxFAIL\_MSG}{wxfailmsg}\\
+\helpref{wxFAIL}{wxfail}\\
+\helpref{wxFatalError}{wxfatalerror}\\
+\helpref{wxFileExists}{wxfileexists}\\
+\helpref{wxFileModificationTime}{wxfilemodificationtime}\\
+\helpref{wxFileNameFromPath}{wxfilenamefrompath}\\
+\helpref{wxFileSelector}{wxfileselector}\\
+\helpref{wxFindFirstFile}{wxfindfirstfile}\\
+\helpref{wxFindMenuItemId}{wxfindmenuitemid}\\
+\helpref{wxFindNextFile}{wxfindnextfile}\\
+\helpref{wxFindWindowAtPointer}{wxfindwindowatpointer}\\
+\helpref{wxFindWindowAtPoint}{wxfindwindowatpoint}\\
+\helpref{wxFindWindowByLabel}{wxfindwindowbylabel}\\
+\helpref{wxFindWindowByName}{wxfindwindowbyname}\\
+\helpref{wxGetActiveWindow}{wxgetactivewindow}\\
+\helpref{wxGetClipboardData}{wxgetclipboarddata}\\
+\helpref{wxGetClipboardFormatName}{wxgetclipboardformatname}\\
+\helpref{wxGetColourFromUser}{wxgetcolourfromuser}\\
+\helpref{wxGetCwd}{wxgetcwd}\\
+\helpref{wxGetDiskSpace}{wxgetdiskspace}\\
+\helpref{wxGetDisplayName}{wxgetdisplayname}\\
+\helpref{wxGetElapsedTime}{wxgetelapsedtime}\\
+\helpref{wxGetEmailAddress}{wxgetemailaddress}\\
+\helpref{wxGetEnv}{wxgetenv}\\
+\helpref{wxGetFontFromUser}{wxgetfontfromuser}\\
+\helpref{wxGetFreeMemory}{wxgetfreememory}\\
+\helpref{wxGetFullHostName}{wxgetfullhostname}\\
+\helpref{wxGetHomeDir}{wxgethomedir}\\
+\helpref{wxGetHostName}{wxgethostname}\\
+\helpref{wxGetLocalTimeMillis}{wxgetlocaltimemillis}\\
+\helpref{wxGetLocalTime}{wxgetlocaltime}\\
+\helpref{wxGetMousePosition}{wxgetmouseposition}\\
+\helpref{wxGetMultipleChoices}{wxgetmultiplechoices}\\
+\helpref{wxGetMultipleChoice}{wxgetmultiplechoice}\\
+\helpref{wxGetNumberFromUser}{wxgetnumberfromuser}\\
+\helpref{wxGetOSDirectory}{wxgetosdirectory}\\
+\helpref{wxGetOsDescription}{wxgetosdescription}\\
+\helpref{wxGetOsVersion}{wxgetosversion}\\
+\helpref{wxGetPasswordFromUser}{wxgetpasswordfromuser}\\
+\helpref{wxGetPrinterCommand}{wxgetprintercommand}\\
+\helpref{wxGetPrinterFile}{wxgetprinterfile}\\
+\helpref{wxGetPrinterMode}{wxgetprintermode}\\
+\helpref{wxGetPrinterOptions}{wxgetprinteroptions}\\
+\helpref{wxGetPrinterOrientation}{wxgetprinterorientation}\\
+\helpref{wxGetPrinterPreviewCommand}{wxgetprinterpreviewcommand}\\
+\helpref{wxGetPrinterScaling}{wxgetprinterscaling}\\
+\helpref{wxGetPrinterTranslation}{wxgetprintertranslation}\\
+\helpref{wxGetResource}{wxgetresource}\\
+\helpref{wxGetSingleChoiceData}{wxgetsinglechoicedata}\\
+\helpref{wxGetSingleChoiceIndex}{wxgetsinglechoiceindex}\\
+\helpref{wxGetSingleChoice}{wxgetsinglechoice}\\
+\helpref{wxGetTempFileName}{wxgettempfilename}\\
+\helpref{wxGetTextFromUser}{wxgettextfromuser}\\
+\helpref{wxGetTranslation}{wxgettranslation}\\
+\helpref{wxGetUTCTime}{wxgetutctime}\\
+\helpref{wxGetUserHome}{wxgetuserhome}\\
+\helpref{wxGetUserId}{wxgetuserid}\\
+\helpref{wxGetUserName}{wxgetusername}\\
+\helpref{wxGetWorkingDirectory}{wxgetworkingdirectory}\\
+\helpref{wxGetenv}{wxgetenvmacro}\\
+\helpref{wxHandleFatalExceptions}{wxhandlefatalexceptions}\\
+\helpref{wxICON}{wxiconmacro}\\
+\helpref{wxINTXX\_SWAP\_ALWAYS}{intswapalways}\\
+\helpref{wxINTXX\_SWAP\_ON\_BE}{intswaponbe}\\
+\helpref{wxINTXX\_SWAP\_ON\_LE}{intswaponle}\\
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}\\
+\helpref{wxInitialize}{wxinitialize}\\
+\helpref{wxIsAbsolutePath}{wxisabsolutepath}\\
+\helpref{wxIsBusy}{wxisbusy}\\
+\helpref{wxIsClipboardFormatAvailable}{wxisclipboardformatavailable}\\
+\helpref{wxIsEmpty}{wxisempty}\\
+\helpref{wxIsWild}{wxiswild}\\
+\helpref{wxKill}{wxkill}\\
+\helpref{wxLoadUserResource}{wxloaduserresource}\\
+\helpref{wxLogDebug}{wxlogdebug}\\
+\helpref{wxLogError}{wxlogerror}\\
+\helpref{wxLogFatalError}{wxlogfatalerror}\\
+\helpref{wxLogMessage}{wxlogmessage}\\
+\helpref{wxLogStatus}{wxlogstatus}\\
+\helpref{wxLogSysError}{wxlogsyserror}\\
+\helpref{wxLogTrace}{wxlogtrace}\\
+\helpref{wxLogVerbose}{wxlogverbose}\\
+\helpref{wxLogWarning}{wxlogwarning}\\
+\helpref{wxMakeMetafilePlaceable}{wxmakemetafileplaceable}\\
+\helpref{wxMatchWild}{wxmatchwild}\\
+\helpref{wxMessageBox}{wxmessagebox}\\
+\helpref{wxMkdir}{wxmkdir}\\
+\helpref{wxMutexGuiEnter}{wxmutexguienter}\\
+\helpref{wxMutexGuiLeave}{wxmutexguileave}\\
+\helpref{wxNewId}{wxnewid}\\
+\helpref{wxNow}{wxnow}\\
+\helpref{wxOnAssert}{wxonassert}\\
+\helpref{wxOpenClipboard}{wxopenclipboard}\\
+\helpref{wxPathOnly}{wxpathonly}\\
+\helpref{wxPostDelete}{wxpostdelete}\\
+\helpref{wxPostEvent}{wxpostevent}\\
+\helpref{wxRegisterClipboardFormat}{wxregisterclipboardformat}\\
+\helpref{wxRegisterId}{wxregisterid}\\
+\helpref{wxRemoveFile}{wxremovefile}\\
+\helpref{wxRenameFile}{wxrenamefile}\\
+\helpref{wxResourceAddIdentifier}{wxresourceaddidentifier}\\
+\helpref{wxResourceClear}{wxresourceclear}\\
+\helpref{wxResourceCreateBitmap}{wxresourcecreatebitmap}\\
+\helpref{wxResourceCreateIcon}{wxresourcecreateicon}\\
+\helpref{wxResourceCreateMenuBar}{wxresourcecreatemenubar}\\
+\helpref{wxResourceGetIdentifier}{wxresourcegetidentifier}\\
+\helpref{wxResourceParseData}{wxresourcedata}\\
+\helpref{wxResourceParseFile}{wxresourceparsefile}\\
+\helpref{wxResourceParseString}{wxresourceparsestring}\\
+\helpref{wxResourceRegisterBitmapData}{registerbitmapdata}\\
+\helpref{wxResourceRegisterIconData}{wxresourceregistericondata}\\
+\helpref{wxRmdir}{wxrmdir}\\
+\helpref{wxSafeYield}{wxsafeyield}\\
+\helpref{wxSetClipboardData}{wxsetclipboarddata}\\
+\helpref{wxSetCursor}{wxsetcursor}\\
+\helpref{wxSetDisplayName}{wxsetdisplayname}\\
+\helpref{wxSetEnv}{wxsetenv}\\
+\helpref{wxSetPrinterCommand}{wxsetprintercommand}\\
+\helpref{wxSetPrinterFile}{wxsetprinterfile}\\
+\helpref{wxSetPrinterMode}{wxsetprintermode}\\
+\helpref{wxSetPrinterOptions}{wxsetprinteroptions}\\
+\helpref{wxSetPrinterOrientation}{wxsetprinterorientation}\\
+\helpref{wxSetPrinterPreviewCommand}{wxsetprinterpreviewcommand}\\
+\helpref{wxSetPrinterScaling}{wxsetprinterscaling}\\
+\helpref{wxSetPrinterTranslation}{wxsetprintertranslation}\\
+\helpref{wxSetWorkingDirectory}{wxsetworkingdirectory}\\
+\helpref{wxShell}{wxshell}\\
+\helpref{wxShowTip}{wxshowtip}\\
+\helpref{wxSleep}{wxsleep}\\
+\helpref{wxSnprintf}{wxsnprintf}\\
+\helpref{wxSplitPath}{wxsplitfunction}\\
+\helpref{wxStartTimer}{wxstarttimer}\\
+\helpref{wxStaticCast}{wxstaticcast}\\
+\helpref{wxStricmp}{wxstricmp}\\
+\helpref{wxStringEq}{wxstringeq}\\
+\helpref{wxStringMatch}{wxstringmatch}\\
+\helpref{wxStripMenuCodes}{wxstripmenucodes}\\
+\helpref{wxStrlen}{wxstrlen}\\
+\helpref{wxSysErrorCode}{wxsyserrorcode}\\
+\helpref{wxSysErrorMsg}{wxsyserrormsg}\\
+\helpref{wxToLower}{wxtolower}\\
+\helpref{wxToUpper}{wxtoupper}\\
+\helpref{wxTraceLevel}{wxtracelevel}\\
+\helpref{wxTrace}{wxtrace}\\
+\helpref{wxTransferFileToStream}{wxtransferfiletostream}\\
+\helpref{wxTransferStreamToFile}{wxtransferstreamtofile}\\
+\helpref{wxTrap}{wxtrap}\\
+\helpref{wxUninitialize}{wxuninitialize}\\
+\helpref{wxUnix2DosFilename}{wxunix2dosfilename}\\
+\helpref{wxUnsetEnv}{wxunsetenv}\\
+\helpref{wxUsleep}{wxusleep}\\
+\helpref{wxVsnprintf}{wxvsnprintf}\\
+\helpref{wxWakeUpIdle}{wxwakeupidle}\\
+\helpref{wxWriteResource}{wxwriteresource}\\
+\helpref{wxYield}{wxyield}
+
+\section{Version macros}\label{versionfunctions}
+
+The following constants are defined in wxWindows:
-\section{File functions}\label{filefunctions}
-
-\wxheading{Include files}
-
-<wx/utils.h>
+\begin{itemize}\itemsep=0pt
+\item {\tt wxMAJOR\_VERSION} is the major version of wxWindows
+\item {\tt wxMINOR\_VERSION} is the minor version of wxWindows
+\item {\tt wxRELEASE\_NUMBER} is the release number
+\end{itemize}
-\wxheading{See also}
+For example, the values or these constants for wxWindows 2.1.15 are 2, 1 and
+15.
-\helpref{wxPathList}{wxpathlist}
+Additionally, {\tt wxVERSION\_STRING} is a user-readable string containing
+the full wxWindows version and {\tt wxVERSION\_NUMBER} is a combination of the
+three version numbers above: for 2.1.15, it is 2115 and it is 2200 for
+wxWindows 2.2.
-\membersection{::wxDirExists}
+\wxheading{Include files}
-\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
+<wx/version.h> or <wx/defs.h>
-Returns TRUE if the directory exists.
+\membersection{wxCHECK\_VERSION}\label{wxcheckversion}
-\membersection{::wxDos2UnixFilename}
+\func{bool}{wxCHECK\_VERSION}{\param{}{major, minor, release}}
-\func{void}{Dos2UnixFilename}{\param{const wxString\& }{s}}
+This is a macro which evaluates to true if the current wxWindows version is at
+least major.minor.release.
-Converts a DOS to a Unix filename by replacing backslashes with forward
-slashes.
+For example, to test if the program is compiled with wxWindows 2.2 or higher,
+the following can be done:
-\membersection{::wxFileExists}
+\begin{verbatim}
+ wxString s;
+#if wxCHECK_VERSION(2, 2, 0)
+ if ( s.StartsWith("foo") )
+#else // replacement code for old version
+ if ( strncmp(s, "foo", 3) == 0 )
+#endif
+ {
+ ...
+ }
+\end{verbatim}
-\func{bool}{wxFileExists}{\param{const wxString\& }{filename}}
+\section{Application initialization and termination}\label{appinifunctions}
-Returns TRUE if the file exists. It also returns TRUE if the file is
-a directory.
+The functions in this section are used on application startup/shutdown and also
+to control the behaviour of the main event loop of the GUI programs.
-\membersection{::wxFileNameFromPath}
+\membersection{::wxEntry}\label{wxentry}
-\func{wxString}{wxFileNameFromPath}{\param{const wxString\& }{path}}
+This initializes wxWindows in a platform-dependent way. Use this if you
+are not using the default wxWindows entry code (e.g. main or WinMain). For example,
+you can initialize wxWindows from an Microsoft Foundation Classes application using
+this function.
-\func{char*}{wxFileNameFromPath}{\param{char* }{path}}
+\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
+ \param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = TRUE}}
-Returns the filename for a full path. The second form returns a pointer to
-temporary storage that should not be deallocated.
+wxWindows initialization under Windows (non-DLL). If {\it enterLoop} is FALSE, the
+function will return immediately after calling wxApp::OnInit. Otherwise, the wxWindows
+message loop will be entered.
-\membersection{::wxFindFirstFile}\label{wxfindfirstfile}
+\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
+ \param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
-\func{wxString}{wxFindFirstFile}{\param{const char*}{spec}, \param{int}{ flags = 0}}
+wxWindows initialization under Windows (for applications constructed as a DLL).
-This function does directory searching; returns the first file
-that matches the path {\it spec}, or the empty string. Use \helpref{wxFindNextFile}{wxfindnextfile} to
-get the next matching file. Neither will report the current directory "." or the
-parent directory "..".
+\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
-{\it spec} may contain wildcards.
+wxWindows initialization under Unix.
-{\it flags} may be wxDIR for restricting the query to directories, wxFILE for files or zero for either.
+\wxheading{Remarks}
-For example:
+To clean up wxWindows, call wxApp::OnExit followed by the static function
+wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWindows:
\begin{verbatim}
- wxString f = wxFindFirstFile("/home/project/*.*");
- while ( !f.IsEmpty() )
- {
- ...
- f = wxFindNextFile();
- }
-\end{verbatim}
-
-\membersection{::wxFindNextFile}\label{wxfindnextfile}
+int CTheApp::ExitInstance()
+{
+ // OnExit isn't called by CleanUp so must be called explicitly.
+ wxTheApp->OnExit();
+ wxApp::CleanUp();
-\func{wxString}{wxFindNextFile}{\void}
+ return CWinApp::ExitInstance();
+}
+\end{verbatim}
-Returns the next file that matches the path passed to \helpref{wxFindFirstFile}{wxfindfirstfile}.
+\wxheading{Include files}
-See \helpref{wxFindFirstFile}{wxfindfirstfile} for an example.
+<wx/app.h>
-\membersection{::wxGetOSDirectory}\label{wxgetosdirectory}
+\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
-\func{wxString}{wxGetOSDirectory}{\void}
+\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = TRUE}}
-Returns the Windows directory under Windows; on other platforms returns the empty string.
+If {\it doIt} is TRUE, the fatal exceptions (also known as general protection
+faults under Windows or segmentation violations in the Unix world) will be
+caught and passed to \helpref{wxApp::OnFatalException}{wxapponfatalexception}.
+By default, i.e. before this function is called, they will be handled in the
+normal way which usually just means that the application will be terminated.
+Calling wxHandleFatalExceptions() with {\it doIt} equal to FALSE will restore
+this default behaviour.
\membersection{::wxInitAllImageHandlers}\label{wxinitallimagehandlers}
\func{void}{wxInitAllImageHandlers}{\void}
-Adds some common image format handlers, which, depending on wxWindows
-configuration, can be handlers for BMP (loading) (always installed), GIF
-(loading), PCX (loading), PNM (loading and saving as raw
-rgb), PNG (loading and saving), JPEG (loading and saving), file formats.
+Initializes all available image handlers. For a list of available handlers,
+see \helpref{wxImage}{wximage}.
-See also: \helpref{wxImage}{wximage} \helpref{wxImageHandler}{wximagehandler}
+\wxheading{See also}
-\membersection{::wxIsAbsolutePath}
+\helpref{wxImage}{wximage}, \helpref{wxImageHandler}{wximagehandler}
-\func{bool}{wxIsAbsolutePath}{\param{const wxString\& }{filename}}
+\wxheading{Include files}
-Returns TRUE if the argument is an absolute filename, i.e. with a slash
-or drive name at the beginning.
+<wx/image.h>
-\membersection{::wxPathOnly}
+\membersection{::wxInitialize}\label{wxinitialize}
-\func{wxString}{wxPathOnly}{\param{const wxString\& }{path}}
+\func{bool}{wxInitialize}{\void}
-Returns the directory part of the filename.
+This function is used in wxBase only and only if you don't create
+\helpref{wxApp}{wxapp} object at all. In this case you must call it from your
+{\tt main()} function before calling any other wxWindows functions.
-\membersection{::wxUnix2DosFilename}
+If the function returns {\tt FALSE} the initialization could not be performed,
+in this case the library cannot be used and
+\helpref{wxUninitialize}{wxuninitialize} shouldn't be called neither.
-\func{void}{wxUnix2DosFilename}{\param{const wxString\& }{s}}
+This function may be called several times but
+\helpref{wxUninitialize}{wxuninitialize} must be called for each successful
+call to this function.
-Converts a Unix to a DOS filename by replacing forward
-slashes with backslashes.
+\wxheading{Include files}
-\membersection{::wxConcatFiles}
+<wx/app.h>
-\func{bool}{wxConcatFiles}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2},
-\param{const wxString\& }{file3}}
+\membersection{::wxSafeYield}\label{wxsafeyield}
-Concatenates {\it file1} and {\it file2} to {\it file3}, returning
-TRUE if successful.
+\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}}
-\membersection{::wxCopyFile}
+This function is similar to wxYield, except that it disables the user input to
+all program windows before calling wxYield and re-enables it again
+afterwards. If {\it win} is not NULL, this window will remain enabled,
+allowing the implementation of some limited user interaction.
-\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
+Returns the result of the call to \helpref{::wxYield}{wxyield}.
-Copies {\it file1} to {\it file2}, returning TRUE if successful.
+\wxheading{Include files}
-\membersection{::wxGetCwd}\label{wxgetcwd}
+<wx/utils.h>
-\func{wxString}{wxGetCwd}{\void}
+\membersection{::wxUninitialize}\label{wxuninitialize}
-Returns a string containing the current (or working) directory.
+\func{void}{wxUninitialize}{\void}
-\membersection{::wxGetWorkingDirectory}
+This function is for use in console (wxBase) programs only. It must be called
+once for each previous successful call to \helpref{wxInitialize}{wxinitialize}.
-\func{wxString}{wxGetWorkingDirectory}{\param{char*}{buf=NULL}, \param{int }{sz=1000}}
+\wxheading{Include files}
-This function is obsolete: use \helpref{wxGetCwd}{wxgetcwd} instead.
+<wx/app.h>
-Copies the current working directory into the buffer if supplied, or
-copies the working directory into new storage (which you must delete yourself)
-if the buffer is NULL.
+\membersection{::wxYield}\label{wxyield}
-{\it sz} is the size of the buffer if supplied.
+\func{bool}{wxYield}{\void}
-\membersection{::wxGetTempFileName}
+Calls \helpref{wxApp::Yield}{wxappyield}.
-\func{char*}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char* }{buf=NULL}}
+This function is kept only for backwards compatibility, please use
+\helpref{wxApp::Yield}{wxappyield}method instead in any new code.
-\func{bool}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{wxString\& }{buf}}
+\wxheading{Include files}
-Makes a temporary filename based on {\it prefix}, opens and closes the file,
-and places the name in {\it buf}. If {\it buf} is NULL, new store
-is allocated for the temporary filename using {\it new}.
+<wx/app.h> or <wx/utils.h>
-Under Windows, the filename will include the drive and name of the
-directory allocated for temporary files (usually the contents of the
-TEMP variable). Under Unix, the {\tt /tmp} directory is used.
+\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
-It is the application's responsibility to create and delete the file.
+\func{void}{wxWakeUpIdle}{\void}
-\membersection{::wxIsWild}\label{wxiswild}
+This functions wakes up the (internal and platform dependent) idle system, i.e. it
+will force the system to send an idle event even if the system currently {\it is}
+ idle and thus would not send any idle event until after some other event would get
+sent. This is also useful for sending events between two threads and is used by
+the corresponding functions \helpref{::wxPostEvent}{wxpostevent} and
+\helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
-\func{bool}{wxIsWild}{\param{const wxString\& }{pattern}}
+\wxheading{Include files}
-Returns TRUE if the pattern contains wildcards. See \helpref{wxMatchWild}{wxmatchwild}.
+<wx/app.h>
-\membersection{::wxMatchWild}\label{wxmatchwild}
+\section{Process control functions}\label{processfunctions}
-\func{bool}{wxMatchWild}{\param{const wxString\& }{pattern}, \param{const wxString\& }{text}, \param{bool}{ dot\_special}}
+The functions in this section are used to launch or terminate the other
+processes.
-Returns TRUE if the {\it pattern}\/ matches the {\it text}\/; if {\it
-dot\_special}\/ is TRUE, filenames beginning with a dot are not matched
-with wildcard characters. See \helpref{wxIsWild}{wxiswild}.
+\membersection{::wxExecute}\label{wxexecute}
-\membersection{::wxMkdir}
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
-\func{bool}{wxMkdir}{\param{const wxString\& }{dir}, \param{int }{perm = 0777}}
+\func{long}{wxExecute}{\param{char **}{argv}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
-Makes the directory {\it dir}, returning TRUE if successful.
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}}
-{\it perm} is the access mask for the directory for the systems on which it is
-supported (Unix) and doesn't have effect for the other ones.
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}}
-\membersection{::wxRemoveFile}
+Executes another program in Unix or Windows.
-\func{bool}{wxRemoveFile}{\param{const wxString\& }{file}}
+The first form takes a command string, such as {\tt "emacs file.txt"}.
-Removes {\it file}, returning TRUE if successful.
+The second form takes an array of values: a command, any number of
+arguments, terminated by NULL.
-\membersection{::wxRenameFile}
+The semantics of the third and fourth versions is different from the first two
+and is described in more details below.
-\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
+If {\it sync} is FALSE (the default), flow of control immediately returns.
+If TRUE, the current application waits until the other program has terminated.
-Renames {\it file1} to {\it file2}, returning TRUE if successful.
+In the case of synchronous execution, the return value is the exit code of
+the process (which terminates by the moment the function returns) and will be
+$-1$ if the process couldn't be started and typically 0 if the process
+terminated successfully. Also, while waiting for the process to
+terminate, wxExecute will call \helpref{wxYield}{wxyield}. The caller
+should ensure that this can cause no recursion, in the simplest case by
+calling \helpref{wxEnableTopLevelWindows(FALSE)}{wxenabletoplevelwindows}.
-\membersection{::wxRmdir}
+For asynchronous execution, however, the return value is the process id and
+zero value indicates that the command could not be executed. As an added
+complication, the return value of $-1$ in this case indicattes that we didn't
+launch a new process, but connected to the running one (this can only happen in
+case of using DDE under Windows for command execution). In particular, in this,
+and only this, case the calling code will not get the notification about
+process termination.
-\func{bool}{wxRmdir}{\param{const wxString\& }{dir}, \param{int}{ flags=0}}
+If callback isn't NULL and if execution is asynchronous (note that callback
+parameter can not be non-NULL for synchronous execution),
+\helpref{wxProcess::OnTerminate}{wxprocessonterminate} will be called when
+the process finishes.
-Removes the directory {\it dir}, returning TRUE if successful. Does not work under VMS.
+Finally, you may use the third overloaded version of this function to execute
+a process (always synchronously) and capture its output in the array
+{\it output}. The fourth version adds the possibility to additionally capture
+the messages from standard error output in the {\it errors} array.
-The {\it flags} parameter is reserved for future use.
+See also \helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess},
+\helpref{Exec sample}{sampleexec}.
-\membersection{::wxSetWorkingDirectory}
+\wxheading{Include files}
-\func{bool}{wxSetWorkingDirectory}{\param{const wxString\& }{dir}}
+<wx/utils.h>
-Sets the current working directory, returning TRUE if the operation succeeded.
-Under MS Windows, the current drive is also changed if {\it dir} contains a drive specification.
+\membersection{::wxExit}\label{wxexit}
-\membersection{::wxSplitPath}\label{wxsplitfunction}
+\func{void}{wxExit}{\void}
-\func{void}{wxSplitPath}{\param{const char *}{ fullname}, \param{const wxString *}{ path}, \param{const wxString *}{ name}, \param{const wxString *}{ ext}}
+Exits application after calling \helpref{wxApp::OnExit}{wxapponexit}.
+Should only be used in an emergency: normally the top-level frame
+should be deleted (after deleting all other frames) to terminate the
+application. See \helpref{wxWindow::OnCloseWindow}{wxwindowonclosewindow} and \helpref{wxApp}{wxapp}.
-This function splits a full file name into components: the path (including possible disk/drive
-specification under Windows), the base name and the extension. Any of the output parameters
-({\it path}, {\it name} or {\it ext}) may be NULL if you are not interested in the value of
-a particular component.
+\wxheading{Include files}
-wxSplitPath() will correctly handle filenames with both DOS and Unix path separators under
-Windows, however it will not consider backslashes as path separators under Unix (where backslash
-is a valid character in a filename).
+<wx/app.h>
-On entry, {\it fullname} should be non NULL (it may be empty though).
+\membersection{::wxKill}\label{wxkill}
-On return, {\it path} contains the file path (without the trailing separator), {\it name}
-contains the file name and {\it ext} contains the file extension without leading dot. All
-three of them may be empty if the corresponding component is. The old contents of the
-strings pointed to by these parameters will be overwritten in any case (if the pointers
-are not NULL).
+\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}}
-\membersection{::wxTransferFileToStream}\label{wxtransferfiletostream}
+Equivalent to the Unix kill function: send the given signal {\it sig} to the
+process with PID {\it pid}. The valud signal values are
-\func{bool}{wxTransferFileToStream}{\param{const wxString\& }{filename}, \param{ostream\& }{stream}}
+\begin{verbatim}
+enum wxSignal
+{
+ wxSIGNONE = 0, // verify if the process exists under Unix
+ wxSIGHUP,
+ wxSIGINT,
+ wxSIGQUIT,
+ wxSIGILL,
+ wxSIGTRAP,
+ wxSIGABRT,
+ wxSIGEMT,
+ wxSIGFPE,
+ wxSIGKILL, // forcefully kill, dangerous!
+ wxSIGBUS,
+ wxSIGSEGV,
+ wxSIGSYS,
+ wxSIGPIPE,
+ wxSIGALRM,
+ wxSIGTERM // terminate the process gently
+};
+\end{verbatim}
-Copies the given file to {\it stream}. Useful when converting an old application to
-use streams (within the document/view framework, for example).
+{\tt wxSIGNONE}, {\tt wxSIGKILL} and {\tt wxSIGTERM} have the same meaning
+under both Unix and Windows but all the other signals are equivalent to
+{\tt wxSIGTERM} under Windows.
-Use of this function requires the file wx\_doc.h to be included.
+Returns 0 on success, -1 on failure. If {\it rc} parameter is not NULL, it will
+be filled with an element of {\tt wxKillError} enum:
-\membersection{::wxTransferStreamToFile}\label{wxtransferstreamtofile}
+\begin{verbatim}
+enum wxKillError
+{
+ wxKILL_OK, // no error
+ wxKILL_BAD_SIGNAL, // no such signal
+ wxKILL_ACCESS_DENIED, // permission denied
+ wxKILL_NO_PROCESS, // no such process
+ wxKILL_ERROR // another, unspecified error
+};
+\end{verbatim}
-\func{bool}{wxTransferStreamToFile}{\param{istream\& }{stream} \param{const wxString\& }{filename}}
+\wxheading{See also}
-Copies the given stream to the file {\it filename}. Useful when converting an old application to
-use streams (within the document/view framework, for example).
+\helpref{wxProcess::Kill}{wxprocesskill},\rtfsp
+\helpref{wxProcess::Exists}{wxprocessexists},\rtfsp
+\helpref{Exec sample}{sampleexec}
-Use of this function requires the file wx\_doc.h to be included.
+\wxheading{Include files}
-\section{Network functions}\label{networkfunctions}
+<wx/utils.h>
-\membersection{::wxGetFullHostName}\label{wxgetfullhostname}
+\membersection{::wxShell}\label{wxshell}
-\func{wxString}{wxGetFullHostName}{\void}
+\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
-Returns the FQDN (fully qualified domain host name) or an empty string on
-error.
+Executes a command in an interactive shell window. If no command is
+specified, then just the shell is spawned.
-See also: \helpref{wxGetHostName}{wxgethostname}
+See also \helpref{wxExecute}{wxexecute}, \helpref{Exec sample}{sampleexec}.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetEmailAddress}\label{wxgetemailaddress}
-\func{bool}{wxGetEmailAddress}{\param{const wxString\& }{buf}, \param{int }{sz}}
+\section{Thread functions}\label{threadfunctions}
-Copies the user's email address into the supplied buffer, by
-concatenating the values returned by \helpref{wxGetFullHostName}{wxgetfullhostname}\rtfsp
-and \helpref{wxGetUserId}{wxgetuserid}.
+\wxheading{Include files}
-Returns TRUE if successful, FALSE otherwise.
+<wx/thread.h>
-\wxheading{Include files}
+\wxheading{See also}
-<wx/utils.h>
+\helpref{wxThread}{wxthread}, \helpref{wxMutex}{wxmutex}, \helpref{Multithreading overview}{wxthreadoverview}
-\membersection{::wxGetHostName}\label{wxgethostname}
+\membersection{::wxMutexGuiEnter}\label{wxmutexguienter}
-\func{wxString}{wxGetHostName}{\void}
-\func{bool}{wxGetHostName}{\param{char * }{buf}, \param{int }{sz}}
+\func{void}{wxMutexGuiEnter}{\void}
-Copies the current host machine's name into the supplied buffer. Please note
-that the returned name is {\it not} fully qualified, i.e. it does not include
-the domain name.
+This function must be called when any thread other than the main GUI thread
+wants to get access to the GUI library. This function will block the execution
+of the calling thread until the main thread (or any other thread holding the
+main GUI lock) leaves the GUI library and no other thread will enter the GUI
+library until the calling thread calls \helpref{::wxMutexGuiLeave()}{wxmutexguileave}.
-Under Windows or NT, this function first looks in the environment
-variable SYSTEM\_NAME; if this is not found, the entry {\bf HostName}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file is tried.
+Typically, these functions are used like this:
-The first variant of this function returns the hostname if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+\begin{verbatim}
+void MyThread::Foo(void)
+{
+ // before doing any GUI calls we must ensure that this thread is the only
+ // one doing it!
-See also: \helpref{wxGetFullHostName}{wxgetfullhostname}
+ wxMutexGuiEnter();
-\wxheading{Include files}
+ // Call GUI here:
+ my_window->DrawSomething();
-<wx/utils.h>
+ wxMutexGuiLeave();
+}
+\end{verbatim}
-\section{User identification}\label{useridfunctions}
+Note that under GTK, no creation of top-level windows is allowed in any
+thread but the main one.
-\membersection{::wxGetUserId}\label{wxgetuserid}
+This function is only defined on platforms which support preemptive
+threads.
-\func{wxString}{wxGetUserId}{\void}
-\func{bool}{wxGetUserId}{\param{char * }{buf}, \param{int }{sz}}
+\membersection{::wxMutexGuiLeave}\label{wxmutexguileave}
-This function returns the "user id" also known as "login name" under Unix i.e.
-something like "jsmith". It uniquely identifies the current user (on this system).
+\func{void}{wxMutexGuiLeave}{\void}
-Under Windows or NT, this function first looks in the environment
-variables USER and LOGNAME; if neither of these is found, the entry {\bf UserId}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file is tried.
+See \helpref{::wxMutexGuiEnter()}{wxmutexguienter}.
-The first variant of this function returns the login name if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+This function is only defined on platforms which support preemptive
+threads.
-See also: \helpref{wxGetUserName}{wxgetusername}
+\section{File functions}\label{filefunctions}
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetUserName}\label{wxgetusername}
+\wxheading{See also}
-\func{wxString}{wxGetUserName}{\void}
-\func{bool}{wxGetUserName}{\param{char * }{buf}, \param{int }{sz}}
+\helpref{wxPathList}{wxpathlist}\\
+\helpref{wxDir}{wxdir}\\
+\helpref{wxFile}{wxfile}\\
+\helpref{wxFileName}{wxfilename}
-This function returns the full user name (something like "Mr. John Smith").
+\membersection{::wxDirExists}\label{wxdirexists}
-Under Windows or NT, this function looks for the entry {\bf UserName}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file. If PenWindows
-is running, the entry {\bf Current} in the section {\bf User} of
-the PENWIN.INI file is used.
+\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
-The first variant of this function returns the user name if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+Returns TRUE if the directory exists.
-See also: \helpref{wxGetUserId}{wxgetuserid}
+\membersection{::wxDos2UnixFilename}\label{wxdos2unixfilename}
-\wxheading{Include files}
+\func{void}{wxDos2UnixFilename}{\param{wxChar *}{s}}
-<wx/utils.h>
+Converts a DOS to a Unix filename by replacing backslashes with forward
+slashes.
-\section{String functions}
+\membersection{::wxFileExists}\label{wxfileexists}
-\membersection{::copystring}
+\func{bool}{wxFileExists}{\param{const wxString\& }{filename}}
-\func{char*}{copystring}{\param{const char* }{s}}
+Returns TRUE if the file exists. It also returns TRUE if the file is
+a directory.
-Makes a copy of the string {\it s} using the C++ new operator, so it can be
-deleted with the {\it delete} operator.
+\membersection{::wxFileModificationTime}\label{wxfilemodificationtime}
-\membersection{::wxStringMatch}
+\func{time\_t}{wxFileModificationTime}{\param{const wxString\& }{filename}}
-\func{bool}{wxStringMatch}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2},\\
- \param{bool}{ subString = TRUE}, \param{bool}{ exact = FALSE}}
+Returns time of last modification of given file.
-Returns TRUE if the substring {\it s1} is found within {\it s2},
-ignoring case if {\it exact} is FALSE. If {\it subString} is FALSE,
-no substring matching is done.
+\membersection{::wxFileNameFromPath}\label{wxfilenamefrompath}
-\membersection{::wxStringEq}\label{wxstringeq}
+\func{wxString}{wxFileNameFromPath}{\param{const wxString\& }{path}}
-\func{bool}{wxStringEq}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2}}
+\func{char *}{wxFileNameFromPath}{\param{char *}{path}}
-A macro defined as:
+Returns the filename for a full path. The second form returns a pointer to
+temporary storage that should not be deallocated.
+
+\membersection{::wxFindFirstFile}\label{wxfindfirstfile}
+
+\func{wxString}{wxFindFirstFile}{\param{const char *}{spec}, \param{int}{ flags = 0}}
+
+This function does directory searching; returns the first file
+that matches the path {\it spec}, or the empty string. Use \helpref{wxFindNextFile}{wxfindnextfile} to
+get the next matching file. Neither will report the current directory "." or the
+parent directory "..".
+
+{\it spec} may contain wildcards.
+
+{\it flags} may be wxDIR for restricting the query to directories, wxFILE for files or zero for either.
+
+For example:
\begin{verbatim}
-#define wxStringEq(s1, s2) (s1 && s2 && (strcmp(s1, s2) == 0))
+ wxString f = wxFindFirstFile("/home/project/*.*");
+ while ( !f.IsEmpty() )
+ {
+ ...
+ f = wxFindNextFile();
+ }
\end{verbatim}
-\membersection{::IsEmpty}\label{isempty}
+\membersection{::wxFindNextFile}\label{wxfindnextfile}
-\func{bool}{IsEmpty}{\param{const char *}{ p}}
+\func{wxString}{wxFindNextFile}{\void}
-Returns TRUE if the string is empty, FALSE otherwise. It is safe to pass NULL
-pointer to this function and it will return TRUE for it.
+Returns the next file that matches the path passed to \helpref{wxFindFirstFile}{wxfindfirstfile}.
-\membersection{::Stricmp}\label{stricmp}
+See \helpref{wxFindFirstFile}{wxfindfirstfile} for an example.
-\func{int}{Stricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
+\membersection{::wxGetDiskSpace}\label{wxgetdiskspace}
-Returns a negative value, 0, or positive value if {\it p1} is less than, equal
-to or greater than {\it p2}. The comparison is case-insensitive.
+\func{bool}{wxGetDiskSpace}{\param{const wxString\& }{path}, \param{wxLongLong }{*total = NULL}, \param{wxLongLong }{*free = NULL}}
-This function complements the standard C function {\it strcmp()} which performs
-case-sensitive comparison.
+This function returns the total number of bytes and number of free bytes on
+the disk containing the directory {\it path} (it should exist). Both
+{\it total} and {\it free} parameters may be {\tt NULL} if the corresponding
+information is not needed.
-\membersection{::Strlen}\label{strlen}
+\wxheading{Returns}
-\func{size\_t}{Strlen}{\param{const char *}{ p}}
+{\tt TRUE} on success, {\tt FALSE} if an error occured (for example, the
+directory doesn't exist).
-This is a safe version of standard function {\it strlen()}: it does exactly the
-same thing (i.e. returns the length of the string) except that it returns 0 if
-{\it p} is the NULL pointer.
+\wxheading{Portability}
-\membersection{::wxGetTranslation}\label{wxgettranslation}
+This function is implemented for Win16 (only for drives less than 2Gb), Win32,
+Mac OS and generic Unix provided the system has {\tt statfs()} function.
-\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
+This function first appeared in wxWindows 2.3.2.
-This function returns the translation of string {\it str} in the current
-\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
-message catalogs (see \helpref{i18n overview}{internationalization}), the
-original string is returned. In debug build, an error message is logged - this
-should help to find the strings which were not yet translated. As this function
-is used very often, an alternative syntax is provided: the \_() macro is
-defined as wxGetTranslation().
+\membersection{::wxGetOSDirectory}\label{wxgetosdirectory}
-\membersection{::wxSnprintf}\label{wxsnprintf}
+\func{wxString}{wxGetOSDirectory}{\void}
-\func{int}{wxSnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{}{...}}
+Returns the Windows directory under Windows; on other platforms returns the empty string.
-This function replaces the dangerous standard function {\tt sprintf()} and is
-like {\tt snprintf()} available on some platforms. The only difference with
-sprintf() is that an additional argument - buffer size - is taken and the
-buffer is never overflowed.
+\membersection{::wxIsAbsolutePath}\label{wxisabsolutepath}
-Returns the number of characters copied to the buffer or -1 if there is not
-enough space.
+\func{bool}{wxIsAbsolutePath}{\param{const wxString\& }{filename}}
-\wxheading{See also:}
-\helpref{wxVsnprintf}{wxvsnprintf},
-\helpref{wxString::Printf}{wxstringprintf}
+Returns TRUE if the argument is an absolute filename, i.e. with a slash
+or drive name at the beginning.
-\membersection{::wxVsnprintf}\label{wxsnprintf}
+\membersection{::wxPathOnly}\label{wxpathonly}
-\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argptr}}
+\func{wxString}{wxPathOnly}{\param{const wxString\& }{path}}
-The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list}
-argument instead of arbitrary number of parameters.
+Returns the directory part of the filename.
-\wxheading{See also:}
-\helpref{wxSnprintf}{wxsnprintf},
-\helpref{wxString::PrintfV}{wxstringprintfv}
+\membersection{::wxUnix2DosFilename}\label{wxunix2dosfilename}
-\section{Dialog functions}\label{dialogfunctions}
+\func{void}{wxUnix2DosFilename}{\param{const wxString\& }{s}}
-Below are a number of convenience functions for getting input from the
-user or displaying messages. Note that in these functions the last three
-parameters are optional. However, it is recommended to pass a parent frame
-parameter, or (in MS Windows or Motif) the wrong window frame may be brought to
-the front when the dialog box is popped up.
+Converts a Unix to a DOS filename by replacing forward
+slashes with backslashes.
-\membersection{::wxCreateFileTipProvider}\label{wxcreatefiletipprovider}
+\membersection{::wxConcatFiles}\label{wxconcatfiles}
-\func{wxTipProvider *}{wxCreateFileTipProvider}{\param{const wxString\& }{filename},
- \param{size\_t }{currentTip}}
+\func{bool}{wxConcatFiles}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2},
+\param{const wxString\& }{file3}}
-This function creates a \helpref{wxTipProvider}{wxtipprovider} which may be
-used with \helpref{wxShowTip}{wxshowtip}.
+Concatenates {\it file1} and {\it file2} to {\it file3}, returning
+TRUE if successful.
-\docparam{filename}{The name of the file containing the tips, one per line}
-\docparam{currentTip}{The index of the first tip to show - normally this index
-is remembered between the 2 program runs.}
+\membersection{::wxCopyFile}\label{wxcopyfile}
-\wxheading{See also:}
+\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = TRUE}}
-\helpref{Tips overview}{tipsoverview}
+Copies {\it file1} to {\it file2}, returning TRUE if successful. If
+{\it overwrite} parameter is TRUE (default), the destination file is overwritten
+if it exists, but if {\it overwrite} is FALSE, the functions failes in this
+case.
-\wxheading{Include files}
+\membersection{::wxGetCwd}\label{wxgetcwd}
-<wx/tipdlg.h>
+\func{wxString}{wxGetCwd}{\void}
-\membersection{::wxFileSelector}\label{wxfileselector}
+Returns a string containing the current (or working) directory.
-\func{wxString}{wxFileSelector}{\param{const wxString\& }{message}, \param{const wxString\& }{default\_path = ""},\\
- \param{const wxString\& }{default\_filename = ""}, \param{const wxString\& }{default\_extension = ""},\\
- \param{const wxString\& }{wildcard = ``*.*''}, \param{int }{flags = 0}, \param{wxWindow *}{parent = ""},\\
- \param{int}{ x = -1}, \param{int}{ y = -1}}
+\membersection{::wxGetWorkingDirectory}\label{wxgetworkingdirectory}
-Pops up a file selector box. In Windows, this is the common file selector
-dialog. In X, this is a file selector box with somewhat less functionality.
-The path and filename are distinct elements of a full file pathname.
-If path is empty, the current directory will be used. If filename is empty,
-no default filename will be supplied. The wildcard determines what files
-are displayed in the file selector, and file extension supplies a type
-extension for the required filename. Flags may be a combination of wxOPEN,
-wxSAVE, wxOVERWRITE\_PROMPT, wxHIDE\_READONLY, wxMULTIPLE or 0.
+\func{wxString}{wxGetWorkingDirectory}{\param{char *}{buf=NULL}, \param{int }{sz=1000}}
-Both the Unix and Windows versions implement a wildcard filter. Typing a
-filename containing wildcards (*, ?) in the filename text item, and
-clicking on Ok, will result in only those files matching the pattern being
-displayed.
+This function is obsolete: use \helpref{wxGetCwd}{wxgetcwd} instead.
-The wildcard may be a specification for multiple types of file
-with a description for each, such as:
+Copies the current working directory into the buffer if supplied, or
+copies the working directory into new storage (which you must delete yourself)
+if the buffer is NULL.
-\begin{verbatim}
- "BMP files (*.bmp)|*.bmp|GIF files (*.gif)|*.gif"
-\end{verbatim}
+{\it sz} is the size of the buffer if supplied.
-The application must check for an empty return value (the user pressed
-Cancel). For example:
+\membersection{::wxGetTempFileName}\label{wxgettempfilename}
-\begin{verbatim}
-const wxString& s = wxFileSelector("Choose a file to open");
-if (s)
-{
- ...
-}
-\end{verbatim}
+\func{char *}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char *}{buf=NULL}}
-\wxheading{Include files}
+\func{bool}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{wxString\& }{buf}}
-<wx/filedlg.h>
+%% Makes a temporary filename based on {\it prefix}, opens and closes the file,
+%% and places the name in {\it buf}. If {\it buf} is NULL, new store
+%% is allocated for the temporary filename using {\it new}.
+%%
+%% Under Windows, the filename will include the drive and name of the
+%% directory allocated for temporary files (usually the contents of the
+%% TEMP variable). Under Unix, the {\tt /tmp} directory is used.
+%%
+%% It is the application's responsibility to create and delete the file.
+
+These functions are obsolete, please use\rtfsp
+\helpref{wxFileName::CreateTempFileName}{wxfilenamecreatetempfilename}\rtfsp
+instead.
-\membersection{::wxGetNumberFromUser}\label{wxgetnumberfromuser}
+\membersection{::wxIsWild}\label{wxiswild}
-\func{long}{wxGetNumberFromUser}{
- \param{const wxString\& }{message},
- \param{const wxString\& }{prompt},
- \param{const wxString\& }{caption},
- \param{long }{value},
- \param{long }{min = 0},
- \param{long }{max = 100},
- \param{wxWindow *}{parent = NULL},
- \param{const wxPoint\& }{pos = wxDefaultPosition}}
+\func{bool}{wxIsWild}{\param{const wxString\& }{pattern}}
-Shows a dialog asking the user for numeric input. The dialogs title is set to
-{\it caption}, it contains a (possibly) multiline {\it message} above the
-single line {\it prompt} and the zone for entering the number.
+Returns TRUE if the pattern contains wildcards. See \helpref{wxMatchWild}{wxmatchwild}.
-The number entered must be in the range {\it min}..{\it max} (both of which
-should be positive) and {\it value} is the initial value of it. If the user
-enters an invalid value or cancels the dialog, the function will return -1.
+\membersection{::wxMatchWild}\label{wxmatchwild}
-Dialog is centered on its {\it parent} unless an explicit position is given in
-{\it pos}.
+\func{bool}{wxMatchWild}{\param{const wxString\& }{pattern}, \param{const wxString\& }{text}, \param{bool}{ dot\_special}}
-\wxheading{Include files}
+Returns TRUE if the {\it pattern}\/ matches the {\it text}\/; if {\it
+dot\_special}\/ is TRUE, filenames beginning with a dot are not matched
+with wildcard characters. See \helpref{wxIsWild}{wxiswild}.
-<wx/textdlg.h>
+\membersection{::wxMkdir}\label{wxmkdir}
-\membersection{::wxGetTextFromUser}\label{wxgettextfromuser}
+\func{bool}{wxMkdir}{\param{const wxString\& }{dir}, \param{int }{perm = 0777}}
-\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
- \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
- \param{int}{ x = -1}, \param{int}{ y = -1}, \param{bool}{ centre = TRUE}}
+Makes the directory {\it dir}, returning TRUE if successful.
-Pop up a dialog box with title set to {\it caption}, message {\it message}, and a
-\rtfsp{\it default\_value}. The user may type in text and press OK to return this text,
-or press Cancel to return the empty string.
+{\it perm} is the access mask for the directory for the systems on which it is
+supported (Unix) and doesn't have effect for the other ones.
-If {\it centre} is TRUE, the message text (which may include new line characters)
-is centred; if FALSE, the message is left-justified.
+\membersection{::wxRemoveFile}\label{wxremovefile}
-\wxheading{Include files}
+\func{bool}{wxRemoveFile}{\param{const wxString\& }{file}}
-<wx/textdlg.h>
+Removes {\it file}, returning TRUE if successful.
-\membersection{::wxGetMultipleChoice}\label{wxgetmultiplechoice}
+\membersection{::wxRenameFile}\label{wxrenamefile}
-\func{int}{wxGetMultipleChoice}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
- \param{int }{nsel}, \param{int *}{selection},
- \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
-Pops up a dialog box containing a message, OK/Cancel buttons and a multiple-selection
-listbox. The user may choose one or more item(s) and press OK or Cancel.
+Renames {\it file1} to {\it file2}, returning TRUE if successful.
-The number of initially selected choices, and array of the selected indices,
-are passed in; this array will contain the user selections on exit, with
-the function returning the number of selections. {\it selection} must be
-as big as the number of choices, in case all are selected.
+\membersection{::wxRmdir}\label{wxrmdir}
-If Cancel is pressed, -1 is returned.
+\func{bool}{wxRmdir}{\param{const wxString\& }{dir}, \param{int}{ flags=0}}
-{\it choices} is an array of {\it n} strings for the listbox.
+Removes the directory {\it dir}, returning TRUE if successful. Does not work under VMS.
-If {\it centre} is TRUE, the message text (which may include new line characters)
-is centred; if FALSE, the message is left-justified.
+The {\it flags} parameter is reserved for future use.
-\wxheading{Include files}
+\membersection{::wxSetWorkingDirectory}\label{wxsetworkingdirectory}
-<wx/choicdlg.h>
+\func{bool}{wxSetWorkingDirectory}{\param{const wxString\& }{dir}}
-\membersection{::wxGetSingleChoice}\label{wxgetsinglechoice}
+Sets the current working directory, returning TRUE if the operation succeeded.
+Under MS Windows, the current drive is also changed if {\it dir} contains a drive specification.
-\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
- \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+\membersection{::wxSplitPath}\label{wxsplitfunction}
-Pops up a dialog box containing a message, OK/Cancel buttons and a single-selection
-listbox. The user may choose an item and press OK to return a string or
-Cancel to return the empty string.
+\func{void}{wxSplitPath}{\param{const char *}{ fullname}, \param{wxString *}{ path}, \param{wxString *}{ name}, \param{wxString *}{ ext}}
-{\it choices} is an array of {\it n} strings for the listbox.
+This function splits a full file name into components: the path (including possible disk/drive
+specification under Windows), the base name and the extension. Any of the output parameters
+({\it path}, {\it name} or {\it ext}) may be NULL if you are not interested in the value of
+a particular component.
-If {\it centre} is TRUE, the message text (which may include new line characters)
-is centred; if FALSE, the message is left-justified.
+wxSplitPath() will correctly handle filenames with both DOS and Unix path separators under
+Windows, however it will not consider backslashes as path separators under Unix (where backslash
+is a valid character in a filename).
-\wxheading{Include files}
+On entry, {\it fullname} should be non-NULL (it may be empty though).
-<wx/choicdlg.h>
+On return, {\it path} contains the file path (without the trailing separator), {\it name}
+contains the file name and {\it ext} contains the file extension without leading dot. All
+three of them may be empty if the corresponding component is. The old contents of the
+strings pointed to by these parameters will be overwritten in any case (if the pointers
+are not NULL).
-\membersection{::wxGetSingleChoiceIndex}\label{wxgetsinglechoiceindex}
+\membersection{::wxTransferFileToStream}\label{wxtransferfiletostream}
-\func{int}{wxGetSingleChoiceIndex}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
- \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+\func{bool}{wxTransferFileToStream}{\param{const wxString\& }{filename}, \param{ostream\& }{stream}}
-As {\bf wxGetSingleChoice} but returns the index representing the selected string.
-If the user pressed cancel, -1 is returned.
+Copies the given file to {\it stream}. Useful when converting an old application to
+use streams (within the document/view framework, for example).
\wxheading{Include files}
-<wx/choicdlg.h>
+<wx/docview.h>
-\membersection{::wxGetSingleChoiceData}\label{wxgetsinglechoicedata}
+\membersection{::wxTransferStreamToFile}\label{wxtransferstreamtofile}
-\func{wxString}{wxGetSingleChoiceData}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
- \param{const wxString\& }{client\_data[]}, \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1},\\
- \param{int}{ y = -1}, \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+\func{bool}{wxTransferStreamToFile}{\param{istream\& }{stream} \param{const wxString\& }{filename}}
-As {\bf wxGetSingleChoice} but takes an array of client data pointers
-corresponding to the strings, and returns one of these pointers.
+Copies the given stream to the file {\it filename}. Useful when converting an old application to
+use streams (within the document/view framework, for example).
\wxheading{Include files}
-<wx/choicdlg.h>
+<wx/docview.h>
-\membersection{::wxMessageBox}\label{wxmessagebox}
+\section{Network, user and OS functions}\label{networkfunctions}
-\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK \pipe wxCENTRE},\\
- \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1}}
+The functions in this section are used to retrieve information about the
+current computer and/or user characteristics.
-General purpose message dialog. {\it style} may be a bit list of the
-following identifiers:
+\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
+
+\func{long}{wxGetFreeMemory}{\void}
+
+Returns the amount of free memory in bytes under environments which
+support it, and -1 if not supported. Currently, it is supported only
+under Windows, Linux and Solaris.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetFullHostName}\label{wxgetfullhostname}
+
+\func{wxString}{wxGetFullHostName}{\void}
+
+Returns the FQDN (fully qualified domain host name) or an empty string on
+error.
+
+\wxheading{See also}
+
+\helpref{wxGetHostName}{wxgethostname}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetEmailAddress}\label{wxgetemailaddress}
+
+\func{bool}{wxGetEmailAddress}{\param{const wxString\& }{buf}, \param{int }{sz}}
+
+Copies the user's email address into the supplied buffer, by
+concatenating the values returned by \helpref{wxGetFullHostName}{wxgetfullhostname}\rtfsp
+and \helpref{wxGetUserId}{wxgetuserid}.
+
+Returns TRUE if successful, FALSE otherwise.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetHomeDir}\label{wxgethomedir}
+
+\func{wxString}{wxGetHomeDir}{\void}
+
+Return the (current) user's home directory.
+
+\wxheading{See also}
+
+\helpref{wxGetUserHome}{wxgetuserhome}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetHostName}\label{wxgethostname}
+
+\func{wxString}{wxGetHostName}{\void}
+
+\func{bool}{wxGetHostName}{\param{char * }{buf}, \param{int }{sz}}
+
+Copies the current host machine's name into the supplied buffer. Please note
+that the returned name is {\it not} fully qualified, i.e. it does not include
+the domain name.
+
+Under Windows or NT, this function first looks in the environment
+variable SYSTEM\_NAME; if this is not found, the entry {\bf HostName}\rtfsp
+in the {\bf wxWindows} section of the WIN.INI file is tried.
+
+The first variant of this function returns the hostname if successful or an
+empty string otherwise. The second (deprecated) function returns TRUE
+if successful, FALSE otherwise.
+
+\wxheading{See also}
+
+\helpref{wxGetFullHostName}{wxgetfullhostname}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetUserId}\label{wxgetuserid}
+
+\func{wxString}{wxGetUserId}{\void}
+
+\func{bool}{wxGetUserId}{\param{char * }{buf}, \param{int }{sz}}
+
+This function returns the "user id" also known as "login name" under Unix i.e.
+something like "jsmith". It uniquely identifies the current user (on this system).
+
+Under Windows or NT, this function first looks in the environment
+variables USER and LOGNAME; if neither of these is found, the entry {\bf UserId}\rtfsp
+in the {\bf wxWindows} section of the WIN.INI file is tried.
+
+The first variant of this function returns the login name if successful or an
+empty string otherwise. The second (deprecated) function returns TRUE
+if successful, FALSE otherwise.
+
+\wxheading{See also}
+
+\helpref{wxGetUserName}{wxgetusername}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetOsDescription}\label{wxgetosdescription}
+
+\func{wxString}{wxGetOsDescription}{\void}
+
+Returns the string containing the description of the current platform in a
+user-readable form. For example, this function may return strings like
+{\tt Windows NT Version 4.0} or {\tt Linux 2.2.2 i386}.
+
+\wxheading{See also}
+
+\helpref{::wxGetOsVersion}{wxgetosversion}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxGetOsVersion}\label{wxgetosversion}
+
+\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
+
+Gets operating system version information.
\begin{twocollist}\itemsep=0pt
-\twocolitem{wxYES\_NO}{Puts Yes and No buttons on the message box. May be combined with
-wxCANCEL.}
-\twocolitem{wxCANCEL}{Puts a Cancel button on the message box. May be combined with
-wxYES\_NO or wxOK.}
-\twocolitem{wxOK}{Puts an Ok button on the message box. May be combined with wxCANCEL.}
-\twocolitem{wxCENTRE}{Centres the text.}
-\twocolitem{wxICON\_EXCLAMATION}{Under Windows, displays an exclamation mark symbol.}
-\twocolitem{wxICON\_HAND}{Under Windows, displays a hand symbol.}
-\twocolitem{wxICON\_QUESTION}{Under Windows, displays a question mark symbol.}
-\twocolitem{wxICON\_INFORMATION}{Under Windows, displays an information symbol.}
+\twocolitemruled{Platform}{Return types}
+\twocolitem{Mac OS}{Return value is wxMAC when compiled with CodeWarrior under Mac OS 8.x/9.x and Mac OS X, wxMAC\_DARWIN when compiled with the Apple Developer Tools under Mac OS X.}
+\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
+\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
+\twocolitem{OS/2}{Return value is wxOS2\_PM.}
+\twocolitem{Windows 3.1}{Return value is wxWINDOWS, {\it major} is 3, {\it minor} is 1.}
+\twocolitem{Windows NT/2000}{Return value is wxWINDOWS\_NT, version is returned in {\it major} and {\it minor}}
+\twocolitem{Windows 98}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 1 or greater.}
+\twocolitem{Windows 95}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 0.}
+\twocolitem{Win32s (Windows 3.1)}{Return value is wxWIN32S, {\it major} is 3, {\it minor} is 1.}
+\twocolitem{Watcom C++ 386 supervisor mode (Windows 3.1)}{Return value is wxWIN386, {\it major} is 3, {\it minor} is 1.}
\end{twocollist}
-The return value is one of: wxYES, wxNO, wxCANCEL, wxOK.
+\wxheading{See also}
-For example:
+\helpref{::wxGetOsDescription}{wxgetosdescription}
-\begin{verbatim}
- ...
- int answer = wxMessageBox("Quit program?", "Confirm",
- wxYES_NO | wxCANCEL, main_frame);
- if (answer == wxYES)
- delete main_frame;
- ...
-\end{verbatim}
+\wxheading{Include files}
-{\it message} may contain newline characters, in which case the
-message will be split into separate lines, to cater for large messages.
+<wx/utils.h>
-Under Windows, the native MessageBox function is used unless wxCENTRE
-is specified in the style, in which case a generic function is used.
-This is because the native MessageBox function cannot centre text.
-The symbols are not shown when the generic function is used.
+\membersection{::wxGetUserHome}\label{wxgetuserhome}
+
+\func{const wxChar *}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
+
+Returns the home directory for the given user. If the username is empty
+(default value), this function behaves like
+\helpref{wxGetHomeDir}{wxgethomedir}.
\wxheading{Include files}
-<wx/msgdlg.h>
+<wx/utils.h>
-\membersection{::wxShowTip}\label{wxshowtip}
+\membersection{::wxGetUserName}\label{wxgetusername}
-\func{bool}{wxShowTip}{\param{wxWindow *}{parent},
- \param{wxTipProvider *}{tipProvider},
- \param{bool }{showAtStartup = TRUE}}
+\func{wxString}{wxGetUserName}{\void}
-This function shows a "startup tip" to the user.
+\func{bool}{wxGetUserName}{\param{char * }{buf}, \param{int }{sz}}
-\docparam{parent}{The parent window for the modal dialog}
+This function returns the full user name (something like "Mr. John Smith").
-\docparam{tipProvider}{An object which is used to get the text of the tips.
-It may be created with the \helpref{wxCreateFileTipProvider}{wxcreatefiletipprovider} function.}
+Under Windows or NT, this function looks for the entry {\bf UserName}\rtfsp
+in the {\bf wxWindows} section of the WIN.INI file. If PenWindows
+is running, the entry {\bf Current} in the section {\bf User} of
+the PENWIN.INI file is used.
-\docparam{showAtStartup}{Should be TRUE if startup tips are shown, FALSE
-otherwise. This is used as the initial value for "Show tips at startup"
-checkbox which is shown in the tips dialog.}
+The first variant of this function returns the user name if successful or an
+empty string otherwise. The second (deprecated) function returns {\tt TRUE}
+if successful, {\tt FALSE} otherwise.
-\wxheading{See also:}
+\wxheading{See also}
-\helpref{Tips overview}{tipsoverview}
+\helpref{wxGetUserId}{wxgetuserid}
\wxheading{Include files}
-<wx/tipdlg.h>
+<wx/utils.h>
-\section{GDI functions}\label{gdifunctions}
+\section{String functions}
-The following are relevant to the GDI (Graphics Device Interface).
+\membersection{::copystring}\label{copystring}
-\wxheading{Include files}
+\func{char *}{copystring}{\param{const char *}{s}}
-<wx/gdicmn.h>
+Makes a copy of the string {\it s} using the C++ new operator, so it can be
+deleted with the {\it delete} operator.
-\membersection{::wxColourDisplay}
+This function is deprecated, use \helpref{wxString}{wxstring} class instead.
-\func{bool}{wxColourDisplay}{\void}
+\membersection{::wxIsEmpty}\label{wxisempty}
-Returns TRUE if the display is colour, FALSE otherwise.
+\func{bool}{wxIsEmpty}{\param{const char *}{ p}}
-\membersection{::wxDisplayDepth}
+Returns {\tt TRUE} if the pointer is either {\tt NULL} or points to an empty
+string, {\tt FALSE} otherwise.
-\func{int}{wxDisplayDepth}{\void}
+\membersection{::wxStricmp}\label{wxstricmp}
-Returns the depth of the display (a value of 1 denotes a monochrome display).
+\func{int}{wxStricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
-\membersection{::wxMakeMetafilePlaceable}\label{wxmakemetafileplaceable}
+Returns a negative value, 0, or positive value if {\it p1} is less than, equal
+to or greater than {\it p2}. The comparison is case-insensitive.
-\func{bool}{wxMakeMetafilePlaceable}{\param{const wxString\& }{filename}, \param{int }{minX}, \param{int }{minY},
- \param{int }{maxX}, \param{int }{maxY}, \param{float }{scale=1.0}}
+This function complements the standard C function {\it strcmp()} which performs
+case-sensitive comparison.
-Given a filename for an existing, valid metafile (as constructed using \helpref{wxMetafileDC}{wxmetafiledc})
-makes it into a placeable metafile by prepending a header containing the given
-bounding box. The bounding box may be obtained from a device context after drawing
-into it, using the functions wxDC::MinX, wxDC::MinY, wxDC::MaxX and wxDC::MaxY.
+\membersection{::wxStringMatch}\label{wxstringmatch}
-In addition to adding the placeable metafile header, this function adds
-the equivalent of the following code to the start of the metafile data:
+\func{bool}{wxStringMatch}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2},\\
+ \param{bool}{ subString = TRUE}, \param{bool}{ exact = FALSE}}
+
+Returns {\tt TRUE} if the substring {\it s1} is found within {\it s2},
+ignoring case if {\it exact} is FALSE. If {\it subString} is {\tt FALSE},
+no substring matching is done.
+
+This function is obsolete, use \helpref{wxString::Find}{wxstringfind} instead.
+
+\membersection{::wxStringEq}\label{wxstringeq}
+
+\func{bool}{wxStringEq}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2}}
+
+A macro defined as:
\begin{verbatim}
- SetMapMode(dc, MM_ANISOTROPIC);
- SetWindowOrg(dc, minX, minY);
- SetWindowExt(dc, maxX - minX, maxY - minY);
+#define wxStringEq(s1, s2) (s1 && s2 && (strcmp(s1, s2) == 0))
\end{verbatim}
-This simulates the wxMM\_TEXT mapping mode, which wxWindows assumes.
+This function is obsolete, use \helpref{wxString}{wxstring} instead.
-Placeable metafiles may be imported by many Windows applications, and can be
-used in RTF (Rich Text Format) files.
+\membersection{::wxStrlen}\label{wxstrlen}
-{\it scale} allows the specification of scale for the metafile.
+\func{size\_t}{wxStrlen}{\param{const char *}{ p}}
-This function is only available under Windows.
+This is a safe version of standard function {\it strlen()}: it does exactly the
+same thing (i.e. returns the length of the string) except that it returns 0 if
+{\it p} is the {\tt NULL} pointer.
-\membersection{::wxSetCursor}\label{wxsetcursor}
+\membersection{::wxGetTranslation}\label{wxgettranslation}
-\func{void}{wxSetCursor}{\param{wxCursor *}{cursor}}
+\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
-Globally sets the cursor; only has an effect in Windows and GTK.
-See also \helpref{wxCursor}{wxcursor}, \helpref{wxWindow::SetCursor}{wxwindowsetcursor}.
+This function returns the translation of string {\it str} in the current
+\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
+message catalogs (see \helpref{internationalization overview}{internationalization}), the
+original string is returned. In debug build, an error message is logged - this
+should help to find the strings which were not yet translated. As this function
+is used very often, an alternative syntax is provided: the \_() macro is
+defined as wxGetTranslation().
-\section{Printer settings}\label{printersettings}
+\membersection{::wxSnprintf}\label{wxsnprintf}
+
+\func{int}{wxSnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{}{...}}
+
+This function replaces the dangerous standard function {\tt sprintf()} and is
+like {\tt snprintf()} available on some platforms. The only difference with
+sprintf() is that an additional argument - buffer size - is taken and the
+buffer is never overflowed.
+
+Returns the number of characters copied to the buffer or -1 if there is not
+enough space.
+
+\wxheading{See also}
+
+\helpref{wxVsnprintf}{wxvsnprintf}, \helpref{wxString::Printf}{wxstringprintf}
+
+\membersection{::wxToLower}\label{wxtolower}
+
+\func{char}{wxToLower}{\param{char }{ch}}
+
+Converts the character to lower case. This is implemented as a macro for efficiency.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxToUpper}\label{wxtoupper}
+
+\func{char}{wxToUpper}{\param{char }{ch}}
+
+Converts the character to upper case. This is implemented as a macro for efficiency.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxVsnprintf}\label{wxvsnprintf}
+
+\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argPtr}}
+
+The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list }
+argument instead of arbitrary number of parameters.
+
+\wxheading{See also}
+
+\helpref{wxSnprintf}{wxsnprintf}, \helpref{wxString::PrintfV}{wxstringprintfv}
+
+\section{Dialog functions}\label{dialogfunctions}
+
+Below are a number of convenience functions for getting input from the
+user or displaying messages. Note that in these functions the last three
+parameters are optional. However, it is recommended to pass a parent frame
+parameter, or (in MS Windows or Motif) the wrong window frame may be brought to
+the front when the dialog box is popped up.
+
+\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
+
+\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
+
+Changes the cursor to the given cursor for all windows in the application.
+Use \helpref{wxEndBusyCursor}{wxendbusycursor} to revert the cursor back
+to its previous state. These two calls can be nested, and a counter
+ensures that only the outer calls take effect.
+
+See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxBell}\label{wxbell}
+
+\func{void}{wxBell}{\void}
+
+Ring the system bell.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxCreateFileTipProvider}\label{wxcreatefiletipprovider}
+
+\func{wxTipProvider *}{wxCreateFileTipProvider}{\param{const wxString\& }{filename},
+ \param{size\_t }{currentTip}}
+
+This function creates a \helpref{wxTipProvider}{wxtipprovider} which may be
+used with \helpref{wxShowTip}{wxshowtip}.
+
+\docparam{filename}{The name of the file containing the tips, one per line}
+\docparam{currentTip}{The index of the first tip to show - normally this index
+is remembered between the 2 program runs.}
-These routines are obsolete and should no longer be used!
+\wxheading{See also}
-The following functions are used to control PostScript printing. Under
-Windows, PostScript output can only be sent to a file.
+\helpref{Tips overview}{tipsoverview}
\wxheading{Include files}
-<wx/dcps.h>
+<wx/tipdlg.h>
-\membersection{::wxGetPrinterCommand}
+\membersection{::wxDirSelector}\label{wxdirselector}
-\func{wxString}{wxGetPrinterCommand}{\void}
+\func{wxString}{wxDirSelector}{\param{const wxString\& }{message = wxDirSelectorPromptStr},\\
+ \param{const wxString\& }{default\_path = ""},\\
+ \param{long }{style = 0}, \param{const wxPoint\& }{pos = wxDefaultPosition},\\
+ \param{wxWindow *}{parent = NULL}}
-Gets the printer command used to print a file. The default is {\tt lpr}.
+Pops up a directory selector dialog. The arguments have the same meaning as
+those of wxDirDialog::wxDirDialog(). The message is displayed at the top,
+and the default\_path, if specified, is set as the initial selection.
-\membersection{::wxGetPrinterFile}
+The application must check for an empty return value (if the user pressed
+Cancel). For example:
-\func{wxString}{wxGetPrinterFile}{\void}
+\begin{verbatim}
+const wxString& dir = wxDirSelector("Choose a folder");
+if ( !dir.empty() )
+{
+ ...
+}
+\end{verbatim}
-Gets the PostScript output filename.
+\wxheading{Include files}
-\membersection{::wxGetPrinterMode}
+<wx/dirdlg.h>
-\func{int}{wxGetPrinterMode}{\void}
+\membersection{::wxFileSelector}\label{wxfileselector}
-Gets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
-The default is PS\_PREVIEW.
+\func{wxString}{wxFileSelector}{\param{const wxString\& }{message}, \param{const wxString\& }{default\_path = ""},\\
+ \param{const wxString\& }{default\_filename = ""}, \param{const wxString\& }{default\_extension = ""},\\
+ \param{const wxString\& }{wildcard = ``*.*''}, \param{int }{flags = 0}, \param{wxWindow *}{parent = ""},\\
+ \param{int}{ x = -1}, \param{int}{ y = -1}}
-\membersection{::wxGetPrinterOptions}
+Pops up a file selector box. In Windows, this is the common file selector
+dialog. In X, this is a file selector box with the same functionality.
+The path and filename are distinct elements of a full file pathname.
+If path is empty, the current directory will be used. If filename is empty,
+no default filename will be supplied. The wildcard determines what files
+are displayed in the file selector, and file extension supplies a type
+extension for the required filename. Flags may be a combination of wxOPEN,
+wxSAVE, wxOVERWRITE\_PROMPT, wxHIDE\_READONLY, wxFILE\_MUST\_EXIST, wxMULTIPLE or 0.
-\func{wxString}{wxGetPrinterOptions}{\void}
+Both the Unix and Windows versions implement a wildcard filter. Typing a
+filename containing wildcards (*, ?) in the filename text item, and
+clicking on Ok, will result in only those files matching the pattern being
+displayed.
-Gets the additional options for the print command (e.g. specific printer). The default is nothing.
+The wildcard may be a specification for multiple types of file
+with a description for each, such as:
-\membersection{::wxGetPrinterOrientation}
+\begin{verbatim}
+ "BMP files (*.bmp)|*.bmp|GIF files (*.gif)|*.gif"
+\end{verbatim}
-\func{int}{wxGetPrinterOrientation}{\void}
+The application must check for an empty return value (the user pressed
+Cancel). For example:
-Gets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
+\begin{verbatim}
+const wxString& s = wxFileSelector("Choose a file to open");
+if (s)
+{
+ ...
+}
+\end{verbatim}
-\membersection{::wxGetPrinterPreviewCommand}
+\wxheading{Include files}
-\func{wxString}{wxGetPrinterPreviewCommand}{\void}
+<wx/filedlg.h>
-Gets the command used to view a PostScript file. The default depends on the platform.
+\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
-\membersection{::wxGetPrinterScaling}
+\func{void}{wxEndBusyCursor}{\void}
-\func{void}{wxGetPrinterScaling}{\param{float *}{x}, \param{float *}{y}}
+Changes the cursor back to the original cursor, for all windows in the application.
+Use with \helpref{wxBeginBusyCursor}{wxbeginbusycursor}.
-Gets the scaling factor for PostScript output. The default is 1.0, 1.0.
+See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
-\membersection{::wxGetPrinterTranslation}
+\wxheading{Include files}
-\func{void}{wxGetPrinterTranslation}{\param{float *}{x}, \param{float *}{y}}
+<wx/utils.h>
-Gets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
+\membersection{::wxGetColourFromUser}\label{wxgetcolourfromuser}
-\membersection{::wxSetPrinterCommand}
+\func{wxColour}{wxGetColourFromUser}{\param{wxWindow *}{parent}, \param{const wxColour\& }{colInit}}
-\func{void}{wxSetPrinterCommand}{\param{const wxString\& }{command}}
+Shows the colour selection dialog and returns the colour selected by user or
+invalid colour (use \helpref{wxColour::Ok}{wxcolourok} to test whether a colour
+is valid) if the dialog was cancelled.
-Sets the printer command used to print a file. The default is {\tt lpr}.
+\wxheading{Parameters}
-\membersection{::wxSetPrinterFile}
+\docparam{parent}{The parent window for the colour selection dialog}
-\func{void}{wxSetPrinterFile}{\param{const wxString\& }{filename}}
+\docparam{colInit}{If given, this will be the colour initially selected in the dialog.}
-Sets the PostScript output filename.
+\wxheading{Include files}
-\membersection{::wxSetPrinterMode}
+<wx/colordlg.h>
-\func{void}{wxSetPrinterMode}{\param{int }{mode}}
+\membersection{::wxGetFontFromUser}\label{wxgetfontfromuser}
-Sets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
-The default is PS\_PREVIEW.
+\func{wxFont}{wxGetFontFromUser}{\param{wxWindow *}{parent}, \param{const wxFont\& }{fontInit}}
-\membersection{::wxSetPrinterOptions}
+Shows the font selection dialog and returns the font selected by user or
+invalid font (use \helpref{wxFont::Ok}{wxfontok} to test whether a font
+is valid) if the dialog was cancelled.
-\func{void}{wxSetPrinterOptions}{\param{const wxString\& }{options}}
+\wxheading{Parameters}
-Sets the additional options for the print command (e.g. specific printer). The default is nothing.
+\docparam{parent}{The parent window for the font selection dialog}
-\membersection{::wxSetPrinterOrientation}
+\docparam{fontInit}{If given, this will be the font initially selected in the dialog.}
-\func{void}{wxSetPrinterOrientation}{\param{int}{ orientation}}
+\wxheading{Include files}
-Sets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
+<wx/fontdlg.h>
-\membersection{::wxSetPrinterPreviewCommand}
-\func{void}{wxSetPrinterPreviewCommand}{\param{const wxString\& }{command}}
+\membersection{::wxGetMultipleChoices}\label{wxgetmultiplechoices}
-Sets the command used to view a PostScript file. The default depends on the platform.
+\func{size\_t}{wxGetMultipleChoices}{\\
+ \param{wxArrayInt\& }{selections},\\
+ \param{const wxString\& }{message},\\
+ \param{const wxString\& }{caption},\\
+ \param{const wxArrayString\& }{aChoices},\\
+ \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE},\\
+ \param{int }{width=150}, \param{int }{height=200}}
-\membersection{::wxSetPrinterScaling}
+\func{size\_t}{wxGetMultipleChoices}{\\
+ \param{wxArrayInt\& }{selections},\\
+ \param{const wxString\& }{message},\\
+ \param{const wxString\& }{caption},\\
+ \param{int}{ n}, \param{const wxString\& }{choices[]},\\
+ \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE},\\
+ \param{int }{width=150}, \param{int }{height=200}}
-\func{void}{wxSetPrinterScaling}{\param{float }{x}, \param{float }{y}}
+Pops up a dialog box containing a message, OK/Cancel buttons and a
+multiple-selection listbox. The user may choose an arbitrary (including 0)
+number of items in the listbox whose indices will be returned in
+{\it selection} array. The initial contents of this array will be used to
+select the items when the dialog is shown.
-Sets the scaling factor for PostScript output. The default is 1.0, 1.0.
+You may pass the list of strings to choose from either using {\it choices}
+which is an array of {\it n} strings for the listbox or by using a single
+{\it aChoices} parameter of type \helpref{wxArrayString}{wxarraystring}.
-\membersection{::wxSetPrinterTranslation}
+If {\it centre} is TRUE, the message text (which may include new line
+characters) is centred; if FALSE, the message is left-justified.
-\func{void}{wxSetPrinterTranslation}{\param{float }{x}, \param{float }{y}}
+\wxheading{Include files}
-Sets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
+<wx/choicdlg.h>
-\section{Clipboard functions}\label{clipsboard}
+\perlnote{In wxPerl there is just an array reference in place of {\tt n}
+and {\tt choices}, and no {\tt selections} parameter; the function
+returns an array containing the user selections.}
-These clipboard functions are implemented for Windows only. The use of these functions
-is drepated and the code no longer maintained. Use the \helpref{wxClipboard}{wxclipboard}
-class instead.
+\membersection{::wxGetNumberFromUser}\label{wxgetnumberfromuser}
-\wxheading{Include files}
+\func{long}{wxGetNumberFromUser}{
+ \param{const wxString\& }{message},
+ \param{const wxString\& }{prompt},
+ \param{const wxString\& }{caption},
+ \param{long }{value},
+ \param{long }{min = 0},
+ \param{long }{max = 100},
+ \param{wxWindow *}{parent = NULL},
+ \param{const wxPoint\& }{pos = wxDefaultPosition}}
-<wx/clipbrd.h>
+Shows a dialog asking the user for numeric input. The dialogs title is set to
+{\it caption}, it contains a (possibly) multiline {\it message} above the
+single line {\it prompt} and the zone for entering the number.
-\membersection{::wxClipboardOpen}
+The number entered must be in the range {\it min}..{\it max} (both of which
+should be positive) and {\it value} is the initial value of it. If the user
+enters an invalid value or cancels the dialog, the function will return -1.
-\func{bool}{wxClipboardOpen}{\void}
+Dialog is centered on its {\it parent} unless an explicit position is given in
+{\it pos}.
-Returns TRUE if this application has already opened the clipboard.
+\wxheading{Include files}
-\membersection{::wxCloseClipboard}
+<wx/textdlg.h>
-\func{bool}{wxCloseClipboard}{\void}
+\membersection{::wxGetPasswordFromUser}\label{wxgetpasswordfromuser}
-Closes the clipboard to allow other applications to use it.
+\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
+ \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL}}
-\membersection{::wxEmptyClipboard}
+Similar to \helpref{wxGetTextFromUser}{wxgettextfromuser} but the text entered
+in the dialog is not shown on screen but replaced with stars. This is intended
+to be used for entering passwords as the function name implies.
-\func{bool}{wxEmptyClipboard}{\void}
+\wxheading{Include files}
-Empties the clipboard.
+<wx/textdlg.h>
-\membersection{::wxEnumClipboardFormats}
+\membersection{::wxGetTextFromUser}\label{wxgettextfromuser}
-\func{int}{wxEnumClipboardFormats}{\param{int}{dataFormat}}
+\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
+ \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = -1}, \param{int}{ y = -1}, \param{bool}{ centre = TRUE}}
-Enumerates the formats found in a list of available formats that belong
-to the clipboard. Each call to this function specifies a known
-available format; the function returns the format that appears next in
-the list.
+Pop up a dialog box with title set to {\it caption}, {\it message}, and a
+\rtfsp{\it default\_value}. The user may type in text and press OK to return this text,
+or press Cancel to return the empty string.
-{\it dataFormat} specifies a known format. If this parameter is zero,
-the function returns the first format in the list.
+If {\it centre} is TRUE, the message text (which may include new line characters)
+is centred; if FALSE, the message is left-justified.
-The return value specifies the next known clipboard data format if the
-function is successful. It is zero if the {\it dataFormat} parameter specifies
-the last format in the list of available formats, or if the clipboard
-is not open.
+\wxheading{Include files}
-Before it enumerates the formats function, an application must open the clipboard by using the
-wxOpenClipboard function.
+<wx/textdlg.h>
-\membersection{::wxGetClipboardData}
+\membersection{::wxGetMultipleChoice}\label{wxgetmultiplechoice}
-\func{wxObject *}{wxGetClipboardData}{\param{int}{dataFormat}}
+\func{int}{wxGetMultipleChoice}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
+ \param{int }{nsel}, \param{int *}{selection},
+ \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
-Gets data from the clipboard.
+Pops up a dialog box containing a message, OK/Cancel buttons and a multiple-selection
+listbox. The user may choose one or more item(s) and press OK or Cancel.
-{\it dataFormat} may be one of:
+The number of initially selected choices, and array of the selected indices,
+are passed in; this array will contain the user selections on exit, with
+the function returning the number of selections. {\it selection} must be
+as big as the number of choices, in case all are selected.
-\begin{itemize}\itemsep=0pt
-\item wxCF\_TEXT or wxCF\_OEMTEXT: returns a pointer to new memory containing a null-terminated text string.
-\item wxCF\_BITMAP: returns a new wxBitmap.
-\end{itemize}
+If Cancel is pressed, -1 is returned.
-The clipboard must have previously been opened for this call to succeed.
+{\it choices} is an array of {\it n} strings for the listbox.
-\membersection{::wxGetClipboardFormatName}
+If {\it centre} is TRUE, the message text (which may include new line characters)
+is centred; if FALSE, the message is left-justified.
-\func{bool}{wxGetClipboardFormatName}{\param{int}{dataFormat}, \param{const wxString\& }{formatName}, \param{int}{maxCount}}
+\wxheading{Include files}
-Gets the name of a registered clipboard format, and puts it into the buffer {\it formatName} which is of maximum
-length {\it maxCount}. {\it dataFormat} must not specify a predefined clipboard format.
+<wx/choicdlg.h>
-\membersection{::wxIsClipboardFormatAvailable}
+\membersection{::wxGetSingleChoice}\label{wxgetsinglechoice}
-\func{bool}{wxIsClipboardFormatAvailable}{\param{int}{dataFormat}}
+\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message},\\
+ \param{const wxString\& }{caption},\\
+ \param{const wxArrayString\& }{aChoices},\\
+ \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE},\\
+ \param{int }{width=150}, \param{int }{height=200}}
-Returns TRUE if the given data format is available on the clipboard.
+\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message},\\
+ \param{const wxString\& }{caption},\\
+ \param{int}{ n}, \param{const wxString\& }{choices[]},\\
+ \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE},\\
+ \param{int }{width=150}, \param{int }{height=200}}
-\membersection{::wxOpenClipboard}
+Pops up a dialog box containing a message, OK/Cancel buttons and a
+single-selection listbox. The user may choose an item and press OK to return a
+string or Cancel to return the empty string. Use
+\helpref{wxGetSingleChoiceIndex}{wxgetsinglechoiceindex} if empty string is a
+valid choice and if you want to be able to detect pressing Cancel reliably.
-\func{bool}{wxOpenClipboard}{\void}
+You may pass the list of strings to choose from either using {\it choices}
+which is an array of {\it n} strings for the listbox or by using a single
+{\it aChoices} parameter of type \helpref{wxArrayString}{wxarraystring}.
-Opens the clipboard for passing data to it or getting data from it.
+If {\it centre} is TRUE, the message text (which may include new line
+characters) is centred; if FALSE, the message is left-justified.
-\membersection{::wxRegisterClipboardFormat}
+\wxheading{Include files}
-\func{int}{wxRegisterClipboardFormat}{\param{const wxString\& }{formatName}}
+<wx/choicdlg.h>
-Registers the clipboard data format name and returns an identifier.
+\perlnote{In wxPerl there is just an array reference in place of {\tt n}
+and {\tt choices}.}
-\membersection{::wxSetClipboardData}
+\membersection{::wxGetSingleChoiceIndex}\label{wxgetsinglechoiceindex}
-\func{bool}{wxSetClipboardData}{\param{int}{dataFormat}, \param{wxObject *}{data}, \param{int}{width}, \param{int}{height}}
+\func{int}{wxGetSingleChoiceIndex}{\param{const wxString\& }{message},\\
+ \param{const wxString\& }{caption},\\
+ \param{const wxArrayString\& }{aChoices},\\
+ \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
-Passes data to the clipboard.
+\func{int}{wxGetSingleChoiceIndex}{\param{const wxString\& }{message},\\
+ \param{const wxString\& }{caption},\\
+ \param{int}{ n}, \param{const wxString\& }{choices[]},\\
+ \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
-{\it dataFormat} may be one of:
+As {\bf wxGetSingleChoice} but returns the index representing the selected
+string. If the user pressed cancel, -1 is returned.
-\begin{itemize}\itemsep=0pt
-\item wxCF\_TEXT or wxCF\_OEMTEXT: {\it data} is a null-terminated text string.
-\item wxCF\_BITMAP: {\it data} is a wxBitmap.
-\item wxCF\_DIB: {\it data} is a wxBitmap. The bitmap is converted to a DIB (device independent bitmap).
-\item wxCF\_METAFILE: {\it data} is a wxMetafile. {\it width} and {\it height} are used to give recommended dimensions.
-\end{itemize}
+\wxheading{Include files}
-The clipboard must have previously been opened for this call to succeed.
+<wx/choicdlg.h>
-\section{Miscellaneous functions}\label{miscellany}
+\perlnote{In wxPerl there is just an array reference in place of {\tt n}
+and {\tt choices}.}
-\membersection{::wxNewId}
+\membersection{::wxGetSingleChoiceData}\label{wxgetsinglechoicedata}
-\func{long}{wxNewId}{\void}
+\func{wxString}{wxGetSingleChoiceData}{\param{const wxString\& }{message},\\
+ \param{const wxString\& }{caption},\\
+ \param{const wxArrayString\& }{aChoices},\\
+ \param{const wxString\& }{client\_data[]},\\
+ \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
-Generates an integer identifier unique to this run of the program.
+\func{wxString}{wxGetSingleChoiceData}{\param{const wxString\& }{message},\\
+ \param{const wxString\& }{caption},\\
+ \param{int}{ n}, \param{const wxString\& }{choices[]},\\
+ \param{const wxString\& }{client\_data[]},\\
+ \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = -1}, \param{int}{ y = -1},\\
+ \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+
+As {\bf wxGetSingleChoice} but takes an array of client data pointers
+corresponding to the strings, and returns one of these pointers or NULL if
+Cancel was pressed. The {\it client\_data} array must have the same number of
+elements as {\it choices} or {\it aChoices}!
\wxheading{Include files}
-<wx/utils.h>
+<wx/choicdlg.h>
-\membersection{::wxRegisterId}
+\perlnote{In wxPerl there is just an array reference in place of {\tt n}
+and {\tt choices}, and the client data array must have the
+same length as the choices array.}
-\func{void}{wxRegisterId}{\param{long}{ id}}
+\membersection{::wxIsBusy}\label{wxisbusy}
-Ensures that ids subsequently generated by {\bf NewId} do not clash with
-the given {\bf id}.
+\func{bool}{wxIsBusy}{\void}
-\wxheading{Include files}
+Returns TRUE if between two \helpref{wxBeginBusyCursor}{wxbeginbusycursor} and\rtfsp
+\helpref{wxEndBusyCursor}{wxendbusycursor} calls.
-<wx/utils.h>
+See also \helpref{wxBusyCursor}{wxbusycursor}.
-\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
+\wxheading{Include files}
-\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
+<wx/utils.h>
-Changes the cursor to the given cursor for all windows in the application.
-Use \helpref{wxEndBusyCursor}{wxendbusycursor} to revert the cursor back
-to its previous state. These two calls can be nested, and a counter
-ensures that only the outer calls take effect.
+\membersection{::wxMessageBox}\label{wxmessagebox}
-See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK \pipe wxCENTRE},\\
+ \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1}}
-\wxheading{Include files}
+General purpose message dialog. {\it style} may be a bit list of the
+following identifiers:
-<wx/utils.h>
+\begin{twocollist}\itemsep=0pt
+\twocolitem{wxYES\_NO}{Puts Yes and No buttons on the message box. May be combined with
+wxCANCEL.}
+\twocolitem{wxCANCEL}{Puts a Cancel button on the message box. May be combined with
+wxYES\_NO or wxOK.}
+\twocolitem{wxOK}{Puts an Ok button on the message box. May be combined with wxCANCEL.}
+\twocolitem{wxCENTRE}{Centres the text.}
+\twocolitem{wxICON\_EXCLAMATION}{Displays an exclamation mark symbol.}
+\twocolitem{wxICON\_HAND}{Displays an error symbol.}
+\twocolitem{wxICON\_ERROR}{Displays an error symbol - the same as wxICON\_HAND.}
+\twocolitem{wxICON\_QUESTION}{Displays a question mark symbol.}
+\twocolitem{wxICON\_INFORMATION}{Displays an information symbol.}
+\end{twocollist}
-\membersection{::wxBell}
+The return value is one of: wxYES, wxNO, wxCANCEL, wxOK.
-\func{void}{wxBell}{\void}
+For example:
-Ring the system bell.
+\begin{verbatim}
+ ...
+ int answer = wxMessageBox("Quit program?", "Confirm",
+ wxYES_NO | wxCANCEL, main_frame);
+ if (answer == wxYES)
+ delete main_frame;
+ ...
+\end{verbatim}
-\wxheading{Include files}
+{\it message} may contain newline characters, in which case the
+message will be split into separate lines, to cater for large messages.
-<wx/utils.h>
+Under Windows, the native MessageBox function is used unless wxCENTRE
+is specified in the style, in which case a generic function is used.
+This is because the native MessageBox function cannot centre text.
+The symbols are not shown when the generic function is used.
-\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
+\wxheading{Include files}
-\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
+<wx/msgdlg.h>
-Creates and returns an object of the given class, if the class has been
-registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
+\membersection{::wxShowTip}\label{wxshowtip}
-\membersection{::wxDDECleanUp}\label{wxddecleanup}
+\func{bool}{wxShowTip}{\param{wxWindow *}{parent},
+ \param{wxTipProvider *}{tipProvider},
+ \param{bool }{showAtStartup = TRUE}}
-\func{void}{wxDDECleanUp}{\void}
+This function shows a "startup tip" to the user.
-Called when wxWindows exits, to clean up the DDE system. This no longer needs to be
-called by the application.
+\docparam{parent}{The parent window for the modal dialog}
-See also helpref{wxDDEInitialize}{wxddeinitialize}.
+\docparam{tipProvider}{An object which is used to get the text of the tips.
+It may be created with the \helpref{wxCreateFileTipProvider}{wxcreatefiletipprovider} function.}
-\wxheading{Include files}
+\docparam{showAtStartup}{Should be TRUE if startup tips are shown, FALSE
+otherwise. This is used as the initial value for "Show tips at startup"
+checkbox which is shown in the tips dialog.}
-<wx/dde.h>
+\wxheading{See also}
-\membersection{::wxDDEInitialize}\label{wxddeinitialize}
+\helpref{Tips overview}{tipsoverview}
-\func{void}{wxDDEInitialize}{\void}
+\wxheading{Include files}
-Initializes the DDE system. May be called multiple times without harm.
+<wx/tipdlg.h>
-This no longer needs to be called by the application: it will be called
-by wxWindows if necessary.
+\section{GDI functions}\label{gdifunctions}
-See also \helpref{wxDDEServer}{wxddeserver}, \helpref{wxDDEClient}{wxddeclient}, \helpref{wxDDEConnection}{wxddeconnection},
-\helpref{wxDDECleanUp}{wxddecleanup}.
+The following are relevant to the GDI (Graphics Device Interface).
\wxheading{Include files}
-<wx/dde.h>
-
-\membersection{::wxDebugMsg}\label{wxdebugmsg}
-
-\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
+<wx/gdicmn.h>
-{\bf This function is deprecated, use \helpref{wxLogDebug}{wxlogdebug} instead!}
+\membersection{wxBITMAP}\label{wxbitmapmacro}
-Display a debugging message; under Windows, this will appear on the
-debugger command window, and under Unix, it will be written to standard
-error.
+\func{}{wxBITMAP}{bitmapName}
-The syntax is identical to {\bf printf}: pass a format string and a
-variable list of arguments.
+This macro loads a bitmap from either application resources (on the platforms
+for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
+avoid using {\tt \#ifdef}s when creating bitmaps.
-{\bf Tip:} under Windows, if your application crashes before the
-message appears in the debugging window, put a wxYield call after
-each wxDebugMsg call. wxDebugMsg seems to be broken under WIN32s
-(at least for Watcom C++): preformat your messages and use OutputDebugString
-instead.
+\wxheading{See also}
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+\helpref{Bitmaps and icons overview}{wxbitmapoverview},
+\helpref{wxICON}{wxiconmacro}
\wxheading{Include files}
-<wx/utils.h>
+<wx/gdicmn.h>
-\membersection{::wxDisplaySize}
+\membersection{::wxClientDisplayRect}\label{wxclientdisplayrect}
-\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
+\func{void}{wxClientDisplayRect}{\param{int *}{x}, \param{int *}{y},
+\param{int *}{width}, \param{int *}{height}}
-Gets the physical size of the display in pixels.
+\func{wxRect}{wxGetClientDisplayRect}{\void}
-\wxheading{Include files}
+Returns the dimensions of the work area on the display. On Windows
+this means the area not covered by the taskbar, etc. Other platforms
+are currently defaulting to the whole display until a way is found to
+provide this info for all window managers, etc.
-<wx/gdicmn.h>
+\membersection{::wxColourDisplay}\label{wxcolourdisplay}
-\membersection{::wxEnableTopLevelWindows}\label{wxenabletoplevelwindows}
+\func{bool}{wxColourDisplay}{\void}
-\func{void}{wxEnableTopLevelWindow}{\param{bool}{ enable = TRUE}}
+Returns TRUE if the display is colour, FALSE otherwise.
-This function enables or disables all top level windows. It is used by
-\helpref{::wxSafeYield}{wxsafeyield}.
+\membersection{::wxDisplayDepth}\label{wxdisplaydepth}
-\wxheading{Include files}
+\func{int}{wxDisplayDepth}{\void}
-<wx/utils.h>
+Returns the depth of the display (a value of 1 denotes a monochrome display).
-\membersection{::wxEntry}\label{wxentry}
+\membersection{::wxDisplaySize}\label{wxdisplaysize}
-This initializes wxWindows in a platform-dependent way. Use this if you
-are not using the default wxWindows entry code (e.g. main or WinMain). For example,
-you can initialize wxWindows from an Microsoft Foundation Classes application using
-this function.
+\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = TRUE}}
+\func{wxSize}{wxGetDisplaySize}{\void}
-wxWindows initialization under Windows (non-DLL). If {\it enterLoop} is FALSE, the
-function will return immediately after calling wxApp::OnInit. Otherwise, the wxWindows
-message loop will be entered.
+Returns the display size in pixels.
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
+\membersection{::wxDisplaySizeMM}\label{wxdisplaysizemm}
-wxWindows initialization under Windows (for applications constructed as a DLL).
+\func{void}{wxDisplaySizeMM}{\param{int *}{width}, \param{int *}{height}}
-\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
+\func{wxSize}{wxGetDisplaySizeMM}{\void}
-wxWindows initialization under Unix.
+Returns the display size in millimeters.
-\wxheading{Remarks}
+\membersection{::wxDROP\_ICON}\label{wxdropicon}
-To clean up wxWindows, call wxApp::OnExit followed by the static function
-wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWindows:
+\func{wxIconOrCursor}{wxDROP\_ICON}{\param{const char *}{name}}
-\begin{verbatim}
-int CTheApp::ExitInstance()
-{
- // OnExit isn't called by CleanUp so must be called explicitly.
- wxTheApp->OnExit();
- wxApp::CleanUp();
+This macro creates either a cursor (MSW) or an icon (elsewhere) with the given
+name. Under MSW, the cursor is loaded from the resource file and the icon is
+loaded from XPM file under other platforms.
- return CWinApp::ExitInstance();
-}
-\end{verbatim}
+This macro should be used with
+\helpref{wxDropSource constructor}{wxdropsourcewxdropsource}.
\wxheading{Include files}
-<wx/app.h>
+<wx/dnd.h>
-\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
+\membersection{wxICON}\label{wxiconmacro}
-\func{void}{wxEndBusyCursor}{\void}
+\func{}{wxICON}{iconName}
-Changes the cursor back to the original cursor, for all windows in the application.
-Use with \helpref{wxBeginBusyCursor}{wxbeginbusycursor}.
+This macro loads an icon from either application resources (on the platforms
+for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
+avoid using {\tt \#ifdef}s when creating icons.
-See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+\wxheading{See also}
-\wxheading{Include files}
+\helpref{Bitmaps and icons overview}{wxbitmapoverview},
+\helpref{wxBITMAP}{wxbitmapmacro}
-<wx/utils.h>
+\wxheading{Include files}
-\membersection{::wxError}\label{wxerror}
+<wx/gdicmn.h>
-\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Internal Error"}}
+\membersection{::wxMakeMetafilePlaceable}\label{wxmakemetafileplaceable}
-Displays {\it msg} and continues. This writes to standard error under
-Unix, and pops up a message box under Windows. Used for internal
-wxWindows errors. See also \helpref{wxFatalError}{wxfatalerror}.
+\func{bool}{wxMakeMetafilePlaceable}{\param{const wxString\& }{filename}, \param{int }{minX}, \param{int }{minY},
+ \param{int }{maxX}, \param{int }{maxY}, \param{float }{scale=1.0}}
-\wxheading{Include files}
+Given a filename for an existing, valid metafile (as constructed using \helpref{wxMetafileDC}{wxmetafiledc})
+makes it into a placeable metafile by prepending a header containing the given
+bounding box. The bounding box may be obtained from a device context after drawing
+into it, using the functions wxDC::MinX, wxDC::MinY, wxDC::MaxX and wxDC::MaxY.
-<wx/utils.h>
+In addition to adding the placeable metafile header, this function adds
+the equivalent of the following code to the start of the metafile data:
-\membersection{::wxExecute}\label{wxexecute}
+\begin{verbatim}
+ SetMapMode(dc, MM_ANISOTROPIC);
+ SetWindowOrg(dc, minX, minY);
+ SetWindowExt(dc, maxX - minX, maxY - minY);
+\end{verbatim}
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
+This simulates the wxMM\_TEXT mapping mode, which wxWindows assumes.
-\func{long}{wxExecute}{\param{char **}{argv}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
+Placeable metafiles may be imported by many Windows applications, and can be
+used in RTF (Rich Text Format) files.
-Executes another program in Unix or Windows.
+{\it scale} allows the specification of scale for the metafile.
-The first form takes a command string, such as {\tt "emacs file.txt"}.
+This function is only available under Windows.
-The second form takes an array of values: a command, any number of
-arguments, terminated by NULL.
+\membersection{::wxSetCursor}\label{wxsetcursor}
-If {\it sync} is FALSE (the default), flow of control immediately returns.
-If TRUE, the current application waits until the other program has terminated.
+\func{void}{wxSetCursor}{\param{wxCursor *}{cursor}}
-In the case of synchronous execution, the return value is the exit code of
-the process (which terminates by the moment the function returns) and will be
-$-1$ if the process couldn't be started and typically 0 if the process
-terminated successfully. Also, while waiting for the process to
-terminate, wxExecute will call \helpref{wxYield}{wxyield}. The caller
-should ensure that this can cause no recursion, in the simples case by
-calling \helpref{wxEnableTopLevelWindows(FALSE)}{wxenabletoplevelwindows}.
+Globally sets the cursor; only has an effect in Windows and GTK.
+See also \helpref{wxCursor}{wxcursor}, \helpref{wxWindow::SetCursor}{wxwindowsetcursor}.
-For asynchronous execution, however, the return value is the process id and
-zero value indicates that the command could not be executed.
+\section{Printer settings}\label{printersettings}
-If callback isn't NULL and if execution is asynchronous (note that callback
-parameter can not be non NULL for synchronous execution),
-\helpref{wxProcess::OnTerminate}{wxprocessonterminate} will be called when
-the process finishes.
+These routines are obsolete and should no longer be used!
-See also \helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess}.
+The following functions are used to control PostScript printing. Under
+Windows, PostScript output can only be sent to a file.
\wxheading{Include files}
-<wx/utils.h>
+<wx/dcps.h>
-\membersection{::wxExit}\label{wxexit}
+\membersection{::wxGetPrinterCommand}\label{wxgetprintercommand}
-\func{void}{wxExit}{\void}
+\func{wxString}{wxGetPrinterCommand}{\void}
-Exits application after calling \helpref{wxApp::OnExit}{wxapponexit}.
-Should only be used in an emergency: normally the top-level frame
-should be deleted (after deleting all other frames) to terminate the
-application. See \helpref{wxWindow::OnCloseWindow}{wxwindowonclosewindow} and \helpref{wxApp}{wxapp}.
+Gets the printer command used to print a file. The default is {\tt lpr}.
-\wxheading{Include files}
+\membersection{::wxGetPrinterFile}\label{wxgetprinterfile}
-<wx/app.h>
+\func{wxString}{wxGetPrinterFile}{\void}
-\membersection{::wxFatalError}\label{wxfatalerror}
+Gets the PostScript output filename.
-\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Fatal Error"}}
+\membersection{::wxGetPrinterMode}\label{wxgetprintermode}
-Displays {\it msg} and exits. This writes to standard error under Unix,
-and pops up a message box under Windows. Used for fatal internal
-wxWindows errors. See also \helpref{wxError}{wxerror}.
+\func{int}{wxGetPrinterMode}{\void}
-\wxheading{Include files}
+Gets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
+The default is PS\_PREVIEW.
-<wx/utils.h>
+\membersection{::wxGetPrinterOptions}\label{wxgetprinteroptions}
-\membersection{::wxFindMenuItemId}
+\func{wxString}{wxGetPrinterOptions}{\void}
-\func{int}{wxFindMenuItemId}{\param{wxFrame *}{frame}, \param{const wxString\& }{menuString}, \param{const wxString\& }{itemString}}
+Gets the additional options for the print command (e.g. specific printer). The default is nothing.
-Find a menu item identifier associated with the given frame's menu bar.
+\membersection{::wxGetPrinterOrientation}\label{wxgetprinterorientation}
-\wxheading{Include files}
+\func{int}{wxGetPrinterOrientation}{\void}
-<wx/utils.h>
+Gets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
-\membersection{::wxFindWindowByLabel}
+\membersection{::wxGetPrinterPreviewCommand}\label{wxgetprinterpreviewcommand}
-\func{wxWindow *}{wxFindWindowByLabel}{\param{const wxString\& }{label}, \param{wxWindow *}{parent=NULL}}
+\func{wxString}{wxGetPrinterPreviewCommand}{\void}
-Find a window by its label. Depending on the type of window, the label may be a window title
-or panel item label. If {\it parent} is NULL, the search will start from all top-level
-frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
-The search is recursive in both cases.
+Gets the command used to view a PostScript file. The default depends on the platform.
-\wxheading{Include files}
+\membersection{::wxGetPrinterScaling}\label{wxgetprinterscaling}
-<wx/utils.h>
+\func{void}{wxGetPrinterScaling}{\param{float *}{x}, \param{float *}{y}}
-\membersection{::wxFindWindowByName}\label{wxfindwindowbyname}
+Gets the scaling factor for PostScript output. The default is 1.0, 1.0.
-\func{wxWindow *}{wxFindWindowByName}{\param{const wxString\& }{name}, \param{wxWindow *}{parent=NULL}}
+\membersection{::wxGetPrinterTranslation}\label{wxgetprintertranslation}
-Find a window by its name (as given in a window constructor or {\bf Create} function call).
-If {\it parent} is NULL, the search will start from all top-level
-frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
-The search is recursive in both cases.
+\func{void}{wxGetPrinterTranslation}{\param{float *}{x}, \param{float *}{y}}
-If no such named window is found, {\bf wxFindWindowByLabel} is called.
+Gets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
-\wxheading{Include files}
+\membersection{::wxSetPrinterCommand}\label{wxsetprintercommand}
-<wx/utils.h>
+\func{void}{wxSetPrinterCommand}{\param{const wxString\& }{command}}
-\membersection{::wxGetActiveWindow}\label{wxgetactivewindow}
+Sets the printer command used to print a file. The default is {\tt lpr}.
-\func{wxWindow *}{wxGetActiveWindow}{\void}
+\membersection{::wxSetPrinterFile}\label{wxsetprinterfile}
-Gets the currently active window (Windows only).
+\func{void}{wxSetPrinterFile}{\param{const wxString\& }{filename}}
-\wxheading{Include files}
+Sets the PostScript output filename.
-<wx/windows.h>
+\membersection{::wxSetPrinterMode}\label{wxsetprintermode}
-\membersection{::wxGetDisplayName}\label{wxgetdisplayname}
+\func{void}{wxSetPrinterMode}{\param{int }{mode}}
-\func{wxString}{wxGetDisplayName}{\void}
+Sets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
+The default is PS\_PREVIEW.
-Under X only, returns the current display name. See also \helpref{wxSetDisplayName}{wxsetdisplayname}.
+\membersection{::wxSetPrinterOptions}\label{wxsetprinteroptions}
-\wxheading{Include files}
+\func{void}{wxSetPrinterOptions}{\param{const wxString\& }{options}}
-<wx/utils.h>
+Sets the additional options for the print command (e.g. specific printer). The default is nothing.
-\membersection{::wxGetHomeDir}\label{wxgethomedir}
+\membersection{::wxSetPrinterOrientation}\label{wxsetprinterorientation}
-\func{wxString}{wxGetHomeDir}{\void}
+\func{void}{wxSetPrinterOrientation}{\param{int}{ orientation}}
-Return the (current) user's home directory.
+Sets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
-\wxheading{See also:}
+\membersection{::wxSetPrinterPreviewCommand}\label{wxsetprinterpreviewcommand}
-\helpref{wxGetUserHome}{wxgetuserhome}
+\func{void}{wxSetPrinterPreviewCommand}{\param{const wxString\& }{command}}
-\wxheading{Include files}
+Sets the command used to view a PostScript file. The default depends on the platform.
+
+\membersection{::wxSetPrinterScaling}\label{wxsetprinterscaling}
-<wx/utils.h>
+\func{void}{wxSetPrinterScaling}{\param{float }{x}, \param{float }{y}}
-\membersection{::wxGetHostName}
+Sets the scaling factor for PostScript output. The default is 1.0, 1.0.
-\func{bool}{wxGetHostName}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
+\membersection{::wxSetPrinterTranslation}\label{wxsetprintertranslation}
-Copies the host name of the machine the program is running on into the
-buffer {\it buf}, of maximum size {\it bufSize}, returning TRUE if
-successful.
+\func{void}{wxSetPrinterTranslation}{\param{float }{x}, \param{float }{y}}
-\wxheading{Include files}
+Sets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
-<wx/utils.h>
+\section{Clipboard functions}\label{clipsboard}
-\membersection{::wxGetElapsedTime}\label{wxgetelapsedtime}
+These clipboard functions are implemented for Windows only. The use of these functions
+is deprecated and the code is no longer maintained. Use the \helpref{wxClipboard}{wxclipboard}
+class instead.
-\func{long}{wxGetElapsedTime}{\param{bool}{ resetTimer = TRUE}}
+\wxheading{Include files}
-Gets the time in milliseconds since the last \helpref{::wxStartTimer}{wxstarttimer}.
+<wx/clipbrd.h>
-If {\it resetTimer} is TRUE (the default), the timer is reset to zero
-by this call.
+\membersection{::wxClipboardOpen}\label{wxclipboardopen}
-See also \helpref{wxTimer}{wxtimer}.
+\func{bool}{wxClipboardOpen}{\void}
-\wxheading{Include files}
+Returns TRUE if this application has already opened the clipboard.
-<wx/timer.h>
+\membersection{::wxCloseClipboard}\label{wxcloseclipboard}
-\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
+\func{bool}{wxCloseClipboard}{\void}
-\func{long}{wxGetFreeMemory}{\void}
+Closes the clipboard to allow other applications to use it.
-Returns the amount of free memory in Kbytes under environments which
-support it, and -1 if not supported. Currently, returns a positive value
-under Windows, and -1 under Unix.
+\membersection{::wxEmptyClipboard}\label{wxemptyclipboard}
-\wxheading{Include files}
+\func{bool}{wxEmptyClipboard}{\void}
-<wx/utils.h>
+Empties the clipboard.
-\membersection{::wxGetMousePosition}
+\membersection{::wxEnumClipboardFormats}\label{wxenumclipboardformats}
-\func{void}{wxGetMousePosition}{\param{int* }{x}, \param{int* }{y}}
+\func{int}{wxEnumClipboardFormats}{\param{int}{dataFormat}}
-Returns the mouse position in screen coordinates.
+Enumerates the formats found in a list of available formats that belong
+to the clipboard. Each call to this function specifies a known
+available format; the function returns the format that appears next in
+the list.
-\wxheading{Include files}
+{\it dataFormat} specifies a known format. If this parameter is zero,
+the function returns the first format in the list.
-<wx/utils.h>
+The return value specifies the next known clipboard data format if the
+function is successful. It is zero if the {\it dataFormat} parameter specifies
+the last format in the list of available formats, or if the clipboard
+is not open.
-\membersection{::wxGetOsDescription}\label{wxgetosdescription}
+Before it enumerates the formats function, an application must open the clipboard by using the
+wxOpenClipboard function.
-\func{wxString}{wxGetOsDescription}{\void}
+\membersection{::wxGetClipboardData}\label{wxgetclipboarddata}
-Returns the string containing the description of the current platform in a
-user-readable form. For example, this function may return strings like
-{\tt Windows NT Version 4.0} or {\tt Linux 2.2.2 i386}.
+\func{wxObject *}{wxGetClipboardData}{\param{int}{dataFormat}}
-\wxheading{See also}
+Gets data from the clipboard.
-\helpref{::wxGetOsVersion}{wxgetosversion}
+{\it dataFormat} may be one of:
-\wxheading{Include files}
+\begin{itemize}\itemsep=0pt
+\item wxCF\_TEXT or wxCF\_OEMTEXT: returns a pointer to new memory containing a null-terminated text string.
+\item wxCF\_BITMAP: returns a new wxBitmap.
+\end{itemize}
-<wx/utils.h>
+The clipboard must have previously been opened for this call to succeed.
-\membersection{::wxGetOsVersion}\label{wxgetosversion}
+\membersection{::wxGetClipboardFormatName}\label{wxgetclipboardformatname}
-\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
+\func{bool}{wxGetClipboardFormatName}{\param{int}{dataFormat}, \param{const wxString\& }{formatName}, \param{int}{maxCount}}
-Gets operating system version information.
+Gets the name of a registered clipboard format, and puts it into the buffer {\it formatName} which is of maximum
+length {\it maxCount}. {\it dataFormat} must not specify a predefined clipboard format.
-\begin{twocollist}\itemsep=0pt
-\twocolitemruled{Platform}{Return tyes}
-\twocolitem{Macintosh}{Return value is wxMACINTOSH.}
-\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
-\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
-\twocolitem{OS/2}{Return value is wxOS2\_PM.}
-\twocolitem{Windows 3.1}{Return value is wxWINDOWS, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Windows NT/2000}{Return value is wxWINDOWS\_NT, version is returned in {\it major} and {\it minor}}
-\twocolitem{Windows 98}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 1 or greater.}
-\twocolitem{Windows 95}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 0.}
-\twocolitem{Win32s (Windows 3.1)}{Return value is wxWIN32S, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Watcom C++ 386 supervisor mode (Windows 3.1)}{Return value is wxWIN386, {\it major} is 3, {\it minor} is 1.}
-\end{twocollist}
+\membersection{::wxIsClipboardFormatAvailable}\label{wxisclipboardformatavailable}
-\wxheading{See also}
+\func{bool}{wxIsClipboardFormatAvailable}{\param{int}{dataFormat}}
-\helpref{::wxGetOsDescription}{wxgetosdescription}
+Returns TRUE if the given data format is available on the clipboard.
-\wxheading{Include files}
+\membersection{::wxOpenClipboard}\label{wxopenclipboard}
-<wx/utils.h>
+\func{bool}{wxOpenClipboard}{\void}
-\membersection{::wxGetResource}\label{wxgetresource}
+Opens the clipboard for passing data to it or getting data from it.
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{const wxString\& *}{value}, \param{const wxString\& }{file = NULL}}
+\membersection{::wxRegisterClipboardFormat}\label{wxregisterclipboardformat}
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{float *}{value}, \param{const wxString\& }{file = NULL}}
+\func{int}{wxRegisterClipboardFormat}{\param{const wxString\& }{formatName}}
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{long *}{value}, \param{const wxString\& }{file = NULL}}
+Registers the clipboard data format name and returns an identifier.
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{int *}{value}, \param{const wxString\& }{file = NULL}}
+\membersection{::wxSetClipboardData}\label{wxsetclipboarddata}
-Gets a resource value from the resource database (for example, WIN.INI, or
-.Xdefaults). If {\it file} is NULL, WIN.INI or .Xdefaults is used,
-otherwise the specified file is used.
+\func{bool}{wxSetClipboardData}{\param{int}{dataFormat}, \param{wxObject *}{data}, \param{int}{width}, \param{int}{height}}
-Under X, if an application class (wxApp::GetClassName) has been defined,
-it is appended to the string /usr/lib/X11/app-defaults/ to try to find
-an applications default file when merging all resource databases.
+Passes data to the clipboard.
-The reason for passing the result in an argument is that it
-can be convenient to define a default value, which gets overridden
-if the value exists in the resource file. It saves a separate
-test for that resource's existence, and it also allows
-the overloading of the function for different types.
+{\it dataFormat} may be one of:
-See also \helpref{wxWriteResource}{wxwriteresource}, \helpref{wxConfigBase}{wxconfigbase}.
+\begin{itemize}\itemsep=0pt
+\item wxCF\_TEXT or wxCF\_OEMTEXT: {\it data} is a null-terminated text string.
+\item wxCF\_BITMAP: {\it data} is a wxBitmap.
+\item wxCF\_DIB: {\it data} is a wxBitmap. The bitmap is converted to a DIB (device independent bitmap).
+\item wxCF\_METAFILE: {\it data} is a wxMetafile. {\it width} and {\it height} are used to give recommended dimensions.
+\end{itemize}
-\wxheading{Include files}
+The clipboard must have previously been opened for this call to succeed.
-<wx/utils.h>
+\section{Miscellaneous functions}\label{miscellany}
-\membersection{::wxGetUserId}
+\membersection{::wxNewId}\label{wxnewid}
-\func{bool}{wxGetUserId}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
+\func{long}{wxNewId}{\void}
-Copies the user's login identity (such as ``jacs'') into the buffer {\it
-buf}, of maximum size {\it bufSize}, returning TRUE if successful.
-Under Windows, this returns ``user''.
+Generates an integer identifier unique to this run of the program.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetUserHome}\label{wxgetuserhome}
+\membersection{::wxRegisterId}\label{wxregisterid}
-\func{const wxChar *}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
+\func{void}{wxRegisterId}{\param{long}{ id}}
-Returns the home directory for the given user. If the username is empty
-(default value), this function behaves like
-\helpref{wxGetHomeDir}{wxgethomedir}.
+Ensures that ids subsequently generated by {\bf NewId} do not clash with
+the given {\bf id}.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetUserName}
+\membersection{::wxDDECleanUp}\label{wxddecleanup}
+
+\func{void}{wxDDECleanUp}{\void}
-\func{bool}{wxGetUserName}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
+Called when wxWindows exits, to clean up the DDE system. This no longer needs to be
+called by the application.
-Copies the user's name (such as ``Julian Smart'') into the buffer {\it
-buf}, of maximum size {\it bufSize}, returning TRUE if successful.
-Under Windows, this returns ``unknown''.
+See also \helpref{wxDDEInitialize}{wxddeinitialize}.
\wxheading{Include files}
-<wx/utils.h>
+<wx/dde.h>
-\membersection{::wxKill}\label{wxkill}
+\membersection{::wxDDEInitialize}\label{wxddeinitialize}
-\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig}}
+\func{void}{wxDDEInitialize}{\void}
-Under Unix (the only supported platform), equivalent to the Unix kill function.
-Returns 0 on success, -1 on failure.
+Initializes the DDE system. May be called multiple times without harm.
-Tip: sending a signal of 0 to a process returns -1 if the process does not exist.
-It does not raise a signal in the receiving process.
+This no longer needs to be called by the application: it will be called
+by wxWindows if necessary.
-\wxheading{Include files}
+See also \helpref{wxDDEServer}{wxddeserver}, \helpref{wxDDEClient}{wxddeclient}, \helpref{wxDDEConnection}{wxddeconnection},
+\helpref{wxDDECleanUp}{wxddecleanup}.
-<wx/utils.h>
+\wxheading{Include files}
-\membersection{::wxIsBusy}\label{wxisbusy}
+<wx/dde.h>
-\func{bool}{wxIsBusy}{\void}
+\membersection{::wxDisplaySize}\label{wxdisplaysize}
-Returns TRUE if between two \helpref{wxBeginBusyCursor}{wxbeginbusycursor} and\rtfsp
-\helpref{wxEndBusyCursor}{wxendbusycursor} calls.
+\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
-See also \helpref{wxBusyCursor}{wxbusycursor}.
+Gets the physical size of the display in pixels.
\wxheading{Include files}
-<wx/utils.h>
+<wx/gdicmn.h>
-\membersection{::wxLoadUserResource}\label{wxloaduserresource}
+\membersection{::wxEnableTopLevelWindows}\label{wxenabletoplevelwindows}
-\func{wxString}{wxLoadUserResource}{\param{const wxString\& }{resourceName}, \param{const wxString\& }{resourceType=``TEXT"}}
+\func{void}{wxEnableTopLevelWindow}{\param{bool}{ enable = TRUE}}
-Loads a user-defined Windows resource as a string. If the resource is found, the function creates
-a new character array and copies the data into it. A pointer to this data is returned. If unsuccessful, NULL is returned.
+This function enables or disables all top level windows. It is used by
+\helpref{::wxSafeYield}{wxsafeyield}.
-The resource must be defined in the {\tt .rc} file using the following syntax:
+\wxheading{Include files}
-\begin{verbatim}
-myResource TEXT file.ext
-\end{verbatim}
+<wx/utils.h>
-where {\tt file.ext} is a file that the resource compiler can find.
+\membersection{::wxFindMenuItemId}\label{wxfindmenuitemid}
-One use of this is to store {\tt .wxr} files instead of including the data in the C++ file; some compilers
-cannot cope with the long strings in a {\tt .wxr} file. The resource data can then be parsed
-using \helpref{wxResourceParseString}{wxresourceparsestring}.
+\func{int}{wxFindMenuItemId}{\param{wxFrame *}{frame}, \param{const wxString\& }{menuString}, \param{const wxString\& }{itemString}}
-This function is available under Windows only.
+Find a menu item identifier associated with the given frame's menu bar.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxNow}\label{wxnow}
+\membersection{::wxFindWindowByLabel}\label{wxfindwindowbylabel}
-\func{wxString}{wxNow}{\void}
+\func{wxWindow *}{wxFindWindowByLabel}{\param{const wxString\& }{label}, \param{wxWindow *}{parent=NULL}}
-Returns a string representing the current date and time.
+Find a window by its label. Depending on the type of window, the label may be a window title
+or panel item label. If {\it parent} is NULL, the search will start from all top-level
+frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
+The search is recursive in both cases.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxPostDelete}\label{wxpostdelete}
+\membersection{::wxFindWindowByName}\label{wxfindwindowbyname}
-\func{void}{wxPostDelete}{\param{wxObject *}{object}}
+\func{wxWindow *}{wxFindWindowByName}{\param{const wxString\& }{name}, \param{wxWindow *}{parent=NULL}}
-Tells the system to delete the specified object when
-all other events have been processed. In some environments, it is
-necessary to use this instead of deleting a frame directly with the
-delete operator, because some GUIs will still send events to a deleted window.
+Find a window by its name (as given in a window constructor or {\bf Create} function call).
+If {\it parent} is NULL, the search will start from all top-level
+frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
+The search is recursive in both cases.
-Now obsolete: use \helpref{wxWindow::Close}{wxwindowclose} instead.
+If no such named window is found, {\bf wxFindWindowByLabel} is called.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxPostEvent}\label{wxpostevent}
-
-\func{void}{wxPostEvent}{\param{wxEvtHandler *}{dest}, \param{wxEvent\& }{event}}
-
-This function posts the event to the specified {\it dest} object. The
-difference between sending an event and posting it is that in the first case
-the event is processed before the function returns (in wxWindows, event sending
-is done with \helpref{ProcessEvent}{wxevthandlerprocessevent} function), but in
-the second, the function returns immediately and the event will be processed
-sometime later - usually during the next even loop iteration.
+\membersection{::wxFindWindowAtPoint}\label{wxfindwindowatpoint}
-Note that a copy of the {\it event} is made by the function, so the original
-copy can be deleted as soon as function returns. This function can also be used
-to send events between different threads safely. As this function makes a
-copy of the event, the event needs to have a fully implemented Clone() method,
-which may not be the case for all event in wxWindows.
+\func{wxWindow *}{wxFindWindowAtPoint}{\param{const wxPoint\& }{pt}}
-See also \helpref{AddPendingEvent}{wxevthandleraddpendingevent} (which this function
-uses internally).
+Find the deepest window at the given mouse position in screen coordinates,
+returning the window if found, or NULL if not.
-\wxheading{Include files}
+\membersection{::wxFindWindowAtPointer}\label{wxfindwindowatpointer}
-<wx/app.h>
+\func{wxWindow *}{wxFindWindowAtPointer}{\param{wxPoint\& }{pt}}
-\membersection{::wxSafeYield}\label{wxsafeyield}
+Find the deepest window at the mouse pointer position, returning the window
+and current pointer position in screen coordinates.
-\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}}
+\membersection{::wxGetActiveWindow}\label{wxgetactivewindow}
-This function is similar to wxYield, except that it disables the user input to
-all program windows before calling wxYield and re-enables it again
-afterwards. If {\it win} is not NULL, this window will remain enabled,
-allowing the implementation of some limited user interaction.
+\func{wxWindow *}{wxGetActiveWindow}{\void}
-Returns the result of the call to \helpref{::wxYield}{wxyield}.
+Gets the currently active window (Windows only).
\wxheading{Include files}
-<wx/utils.h>
-
-\membersection{::wxSetDisplayName}\label{wxsetdisplayname}
+<wx/windows.h>
-\func{void}{wxSetDisplayName}{\param{const wxString\& }{displayName}}
+\membersection{::wxGetDisplayName}\label{wxgetdisplayname}
-Under X only, sets the current display name. This is the X host and display name such
-as ``colonsay:0.0", and the function indicates which display should be used for creating
-windows from this point on. Setting the display within an application allows multiple
-displays to be used.
+\func{wxString}{wxGetDisplayName}{\void}
-See also \helpref{wxGetDisplayName}{wxgetdisplayname}.
+Under X only, returns the current display name. See also \helpref{wxSetDisplayName}{wxsetdisplayname}.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxShell}\label{wxshell}
-
-\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
+\membersection{::wxGetMousePosition}\label{wxgetmouseposition}
-Executes a command in an interactive shell window. If no command is
-specified, then just the shell is spawned.
+\func{wxPoint}{wxGetMousePosition}{\void}
-See also \helpref{wxExecute}{wxexecute}.
+Returns the mouse position in screen coordinates.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxSleep}\label{wxsleep}
-
-\func{void}{wxSleep}{\param{int}{ secs}}
+\membersection{::wxGetResource}\label{wxgetresource}
-Sleeps for the specified number of seconds.
+\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
+ \param{const wxString\& *}{value}, \param{const wxString\& }{file = NULL}}
-\wxheading{Include files}
+\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
+ \param{float *}{value}, \param{const wxString\& }{file = NULL}}
-<wx/utils.h>
+\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
+ \param{long *}{value}, \param{const wxString\& }{file = NULL}}
-\membersection{::wxStripMenuCodes}
+\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
+ \param{int *}{value}, \param{const wxString\& }{file = NULL}}
-\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{in}}
+Gets a resource value from the resource database (for example, WIN.INI, or
+.Xdefaults). If {\it file} is NULL, WIN.INI or .Xdefaults is used,
+otherwise the specified file is used.
-\func{void}{wxStripMenuCodes}{\param{char* }{in}, \param{char* }{out}}
+Under X, if an application class (wxApp::GetClassName) has been defined,
+it is appended to the string /usr/lib/X11/app-defaults/ to try to find
+an applications default file when merging all resource databases.
-Strips any menu codes from {\it in} and places the result
-in {\it out} (or returns the new string, in the first form).
+The reason for passing the result in an argument is that it
+can be convenient to define a default value, which gets overridden
+if the value exists in the resource file. It saves a separate
+test for that resource's existence, and it also allows
+the overloading of the function for different types.
-Menu codes include \& (mark the next character with an underline
-as a keyboard shortkey in Windows and Motif) and $\backslash$t (tab in Windows).
+See also \helpref{wxWriteResource}{wxwriteresource}, \helpref{wxConfigBase}{wxconfigbase}.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxStartTimer}\label{wxstarttimer}
-
-\func{void}{wxStartTimer}{\void}
+\membersection{::wxLoadUserResource}\label{wxloaduserresource}
-Starts a stopwatch; use \helpref{::wxGetElapsedTime}{wxgetelapsedtime} to get the elapsed time.
+\func{wxString}{wxLoadUserResource}{\param{const wxString\& }{resourceName}, \param{const wxString\& }{resourceType=``TEXT"}}
-See also \helpref{wxTimer}{wxtimer}.
+Loads a user-defined Windows resource as a string. If the resource is found, the function creates
+a new character array and copies the data into it. A pointer to this data is returned. If unsuccessful, NULL is returned.
-\wxheading{Include files}
+The resource must be defined in the {\tt .rc} file using the following syntax:
-<wx/timer.h>
+\begin{verbatim}
+myResource TEXT file.ext
+\end{verbatim}
-\membersection{::wxToLower}\label{wxtolower}
+where {\tt file.ext} is a file that the resource compiler can find.
-\func{char}{wxToLower}{\param{char }{ch}}
+One use of this is to store {\tt .wxr} files instead of including the data in the C++ file; some compilers
+cannot cope with the long strings in a {\tt .wxr} file. The resource data can then be parsed
+using \helpref{wxResourceParseString}{wxresourceparsestring}.
-Converts the character to lower case. This is implemented as a macro for efficiency.
+This function is available under Windows only.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxToUpper}\label{wxtoupper}
+\membersection{::wxPostDelete}\label{wxpostdelete}
-\func{char}{wxToUpper}{\param{char }{ch}}
+\func{void}{wxPostDelete}{\param{wxObject *}{object}}
-Converts the character to upper case. This is implemented as a macro for efficiency.
+Tells the system to delete the specified object when
+all other events have been processed. In some environments, it is
+necessary to use this instead of deleting a frame directly with the
+delete operator, because some GUIs will still send events to a deleted window.
+
+Now obsolete: use \helpref{wxWindow::Close}{wxwindowclose} instead.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxTrace}\label{wxtrace}
+\membersection{::wxPostEvent}\label{wxpostevent}
-\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
+\func{void}{wxPostEvent}{\param{wxEvtHandler *}{dest}, \param{wxEvent\& }{event}}
-Takes printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+This function posts the event to the specified {\it dest} object. The
+difference between sending an event and posting it is that in the first case
+the event is processed before the function returns (in wxWindows, event sending
+is done with \helpref{ProcessEvent}{wxevthandlerprocessevent} function), but in
+the second, the function returns immediately and the event will be processed
+sometime later - usually during the next even loop iteration.
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+Note that a copy of the {\it event} is made by the function, so the original
+copy can be deleted as soon as function returns. This function can also be used
+to send events between different threads safely. As this function makes a
+copy of the event, the event needs to have a fully implemented Clone() method,
+which may not be the case for all event in wxWindows.
+
+See also \helpref{AddPendingEvent}{wxevthandleraddpendingevent} (which this function
+uses internally).
\wxheading{Include files}
-<wx/memory.h>
+<wx/app.h>
-\membersection{::wxTraceLevel}\label{wxtracelevel}
+\membersection{::wxSetDisplayName}\label{wxsetdisplayname}
-\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
+\func{void}{wxSetDisplayName}{\param{const wxString\& }{displayName}}
-Takes printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-The first argument should be the level at which this information is appropriate.
-It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
-this value.
+Under X only, sets the current display name. This is the X host and display name such
+as ``colonsay:0.0", and the function indicates which display should be used for creating
+windows from this point on. Setting the display within an application allows multiple
+displays to be used.
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+See also \helpref{wxGetDisplayName}{wxgetdisplayname}.
\wxheading{Include files}
-<wx/memory.h>
+<wx/utils.h>
-\membersection{::wxUsleep}\label{wxusleep}
+\membersection{::wxStripMenuCodes}\label{wxstripmenucodes}
-\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
+\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{in}}
-Sleeps for the specified number of milliseconds. Notice that usage of this
-function is encouraged instead of calling usleep(3) directly because the
-standard usleep() function is not MT safe.
+\func{void}{wxStripMenuCodes}{\param{char *}{in}, \param{char *}{out}}
+
+This function is obsolete, please use
+\helpref{wxMenuItem::GetLabelFromText}{wxmenuitemgetlabelfromtext} instead.
+
+Strips any menu codes from {\it in} and places the result
+in {\it out} (or returns the new string, in the first form).
+
+Menu codes include \& (mark the next character with an underline
+as a keyboard shortkey in Windows and Motif) and $\backslash$t (tab in Windows).
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxYield}\label{wxyield}
-
-\func{bool}{wxYield}{\void}
-
-Yields control to pending messages in the windowing system. This can be useful, for example, when a
-time-consuming process writes to a text window. Without an occasional
-yield, the text window will not be updated properly, and (since Windows
-multitasking is cooperative) other processes will not respond.
-
-Caution should be exercised, however, since yielding may allow the
-user to perform actions which are not compatible with the current task.
-Disabling menu items or whole menus during processing can avoid unwanted
-reentrance of code: see \helpref{::wxSafeYield}{wxsafeyield} for a better
-function.
-
-\wxheading{Include files}
-
-<wx/app.h> or <wx/utils.h>
-
-\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
-
-\func{void}{wxWakeUpIdle}{\void}
-
-This functions wakes up the (internal and platform dependent) idle system, i.e. it
-will force the system to send an idle event even if the system currently {\it is}
-idle and thus would not send any idle event until after some other event would get
-sent. This is also useful for sending events between two threads and is used by
-the corresponding functions \helpref{::wxPostEvent}{wxpostevent} and
-\helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
-
-\wxheading{Include files}
-
-<wx/app.h>
-
-\section{Macros}\label{macros}
+\section{Byte order macros}\label{macros}
-These macros are defined in wxWindows.
+The endian-ness issues (that is the difference between big-endian and
+little-endian architectures) are important for the portable programs working
+with the external binary data (for example, data files or data coming from
+network) which is usually in some fixed, platform-independent format. The
+macros are helpful for transforming the data to the correct format.
\membersection{wxINTXX\_SWAP\_ALWAYS}\label{intswapalways}
\func{wxUint16}{wxUINT16\_SWAP\_ALWAYS}{\param{wxUint16 }{value}}
-This macro will swap the bytes of the {\it value} variable from little
-endian to big endian or vice versa.
+These macros will swap the bytes of the {\it value} variable from little
+endian to big endian or vice versa unconditionally, i.e. independently of the
+current platform.
\membersection{wxINTXX\_SWAP\_ON\_BE}\label{intswaponbe}
This macro will swap the bytes of the {\it value} variable from little
endian to big endian or vice versa if the program is compiled on a
-big-endian architecture (such as Sun work stations). If the program has
+big-endian architecture (such as Sun work stations). If the program has
been compiled on a little-endian architecture, the value will be unchanged.
-Use these macros to read data from and write data to a file that stores
-data in little endian (Intel i386) format.
+Use these macros to read data from and write data to a file that stores
+data in little-endian (for example Intel i386) format.
\membersection{wxINTXX\_SWAP\_ON\_LE}\label{intswaponle}
This macro will swap the bytes of the {\it value} variable from little
endian to big endian or vice versa if the program is compiled on a
-little-endian architecture (such as Intel PCs). If the program has
+little-endian architecture (such as Intel PCs). If the program has
been compiled on a big-endian architecture, the value will be unchanged.
-Use these macros to read data from and write data to a file that stores
-data in big endian format.
+Use these macros to read data from and write data to a file that stores
+data in big-endian format.
+
+\section{RTTI functions}\label{macros}
+
+wxWindows uses its own RTTI ("run-time type identification") system which
+predates the current standard C++ RTTI and so is kept for backwards
+compatribility reasons but also because it allows some things which the
+standard RTTI doesn't directly support (such as creating a class from its
+name).
+
+The standard C++ RTTI can be used in the user code without any problems and in
+general you shouldn't need to use the functions and the macros in this section
+unless you are thinking of modifying or adding any wxWindows classes.
+
+\wxheading{See also}
+
+\helpref{RTTI overview}{runtimeclassoverview}
\membersection{CLASSINFO}\label{classinfo}
<wx/object.h>
-\membersection{DECLARE\_ABSTRACT\_CLASS}
+\membersection{DECLARE\_ABSTRACT\_CLASS}\label{declareabstractclass}
\func{}{DECLARE\_ABSTRACT\_CLASS}{className}
<wx/app.h>
-\membersection{DECLARE\_CLASS}
+\membersection{DECLARE\_CLASS}\label{declareclass}
\func{}{DECLARE\_CLASS}{className}
<wx/object.h>
-\membersection{DECLARE\_DYNAMIC\_CLASS}
+\membersection{DECLARE\_DYNAMIC\_CLASS}\label{declaredynamicclass}
\func{}{DECLARE\_DYNAMIC\_CLASS}{className}
Used inside a class declaration to declare that the objects of this class should be dynamically
-createable from run-time type information.
+creatable from run-time type information.
Example:
<wx/object.h>
-\membersection{IMPLEMENT\_ABSTRACT\_CLASS}
+\membersection{IMPLEMENT\_ABSTRACT\_CLASS}\label{implementabstractclass}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}
+\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}\label{implementabstractclass2}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/app.h>
-\membersection{IMPLEMENT\_CLASS}
+\membersection{IMPLEMENT\_CLASS}\label{implementclass}
\func{}{IMPLEMENT\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_CLASS2}
+\membersection{IMPLEMENT\_CLASS2}\label{implementclass2}
\func{}{IMPLEMENT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
-\membersection{IMPLEMENT\_DYNAMIC\_CLASS}
+\membersection{IMPLEMENT\_DYNAMIC\_CLASS}\label{implementdynamicclass}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}
+\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}\label{implementdynamicclass2}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
-\membersection{wxBITMAP}\label{wxbitmapmacro}
+\membersection{wxConstCast}\label{wxconstcast}
-\func{}{wxBITMAP}{bitmapName}
+\func{classname *}{wxConstCast}{ptr, classname}
-This macro loads a bitmap from either application resources (on the platforms
-for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
-avoid using {\tt #ifdef}s when creating bitmaps.
+This macro expands into {\tt const\_cast<classname *>(ptr)} if the compiler
+supports {\it const\_cast} or into an old, C-style cast, otherwise.
\wxheading{See also}
-\helpref{Bitmaps and icons overview}{wxbitmapoverview},
-\helpref{wxICON}{wxiconmacro}
+\helpref{wxDynamicCast}{wxdynamiccast}\\
+\helpref{wxStaticCast}{wxstaticcast}
-\wxheading{Include files}
+\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
-<wx/gdicmn.h>
+\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
+
+Creates and returns an object of the given class, if the class has been
+registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
\membersection{WXDEBUG\_NEW}\label{debugnew}
\membersection{wxDynamicCast}\label{wxdynamiccast}
-\func{}{wxDynamicCast}{ptr, classname}
+\func{classname *}{wxDynamicCast}{ptr, classname}
This macro returns the pointer {\it ptr} cast to the type {\it classname *} if
-the pointer is of this type (the check is done during the run-time) or NULL
-otherwise. Usage of this macro is prefered over obsoleted wxObject::IsKindOf()
-function.
+the pointer is of this type (the check is done during the run-time) or
+{\tt NULL} otherwise. Usage of this macro is preferred over obsoleted
+wxObject::IsKindOf() function.
-The {\it ptr} argument may be NULL, in which case NULL will be returned.
+The {\it ptr} argument may be {\tt NULL}, in which case {\tt NULL} will be
+returned.
Example:
}
else
{
- // no window has the focus or it's not a text control
+ // no window has the focus or it is not a text control
}
\end{verbatim}
\wxheading{See also}
-\helpref{RTTI overview}{runtimeclassoverview}
+\helpref{RTTI overview}{runtimeclassoverview}\\
+\helpref{wxDynamicCastThis}{wxdynamiccastthis}\\
+\helpref{wxConstCast}{wxconstcast}\\
+\helpref{wxStatiicCast}{wxstaticcast}
-\membersection{wxICON}\label{wxiconmacro}
+\membersection{wxDynamicCastThis}\label{wxdynamiccastthis}
-\func{}{wxICON}{iconName}
+\func{classname *}{wxDynamicCastThis}{classname}
-This macro loads an icon from either application resources (on the platforms
-for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
-avoid using {\tt #ifdef}s when creating icons.
+This macro is equivalent to {\tt wxDynamicCast(this, classname)} but the
+latter provokes spurious compilation warnings from some compilers (because it
+tests whether {\tt this} pointer is non {\tt NULL} which is always true), so
+this macro should be used to avoid them.
\wxheading{See also}
-\helpref{Bitmaps and icons overview}{wxbitmapoverview},
-\helpref{wxBITMAP}{wxbitmapmacro}
-
-\wxheading{Include files}
-
-<wx/gdicmn.h>
-
-\membersection{WXTRACE}\label{trace}
-
-\wxheading{Include files}
-
-<wx/object.h>
-
-\func{}{WXTRACE}{formatString, ...}
-
-Calls wxTrace with printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-
-This macro is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\membersection{WXTRACELEVEL}\label{tracelevel}
-
-\func{}{WXTRACELEVEL}{level, formatString, ...}
+\helpref{wxDynamicCast}{wxdynamiccast}
-Calls wxTraceLevel with printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-The first argument should be the level at which this information is appropriate.
-It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
-this value.
+\membersection{wxStaticCast}\label{wxstaticcast}
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+\func{classname *}{wxStaticCast}{ptr, classname}
-\wxheading{Include files}
+This macro checks that the cast is valid in debug mode (an assert failure will
+result if {\tt wxDynamicCast(ptr, classname) == NULL}) and then returns the
+result of executing an equivalent of {\tt static\_cast<classname *>(ptr)}.
-<wx/memory.h>
+\helpref{wxDynamicCast}{wxdynamiccast}\\
+\helpref{wxConstCast}{wxconstcast}
-\section{wxWindows resource functions}\label{resourcefuncs}
+\section{Resource functions}\label{resourcefuncs}
-\overview{wxWindows resource system}{resourceformats}
+\overview{Resource functions}{resourceformats}
This section details functions for manipulating wxWindows (.WXR) resource
files and loading user interface elements from resources.
\normalbox{Please note that this use of the word `resource' is different from that used when talking
about initialisation file resource reading and writing, using such functions
-as wxWriteResource and wxGetResource. It's just an unfortunate clash of terminology.}
+as wxWriteResource and wxGetResource. It is just an unfortunate clash of terminology.}
\helponly{For an overview of the wxWindows resource mechanism, see \helpref{the wxWindows resource system}{resourceformats}.}
See also \helpref{wxWindow::LoadFromResource}{wxwindowloadfromresource} for
loading from resource data.
-{\bf Warning:} this needs updating for wxWindows 2.
-
\membersection{::wxResourceAddIdentifier}\label{wxresourceaddidentifier}
\func{bool}{wxResourceAddIdentifier}{\param{const wxString\& }{name}, \param{int }{value}}
Used for associating a name with an integer identifier (equivalent to dynamically\rtfsp
-\verb$#$defining a name to an integer). Unlikely to be used by an application except
+\tt{#}defining a name to an integer). Unlikely to be used by an application except
perhaps for implementing resource functionality for interpreted languages.
-\membersection{::wxResourceClear}
+\membersection{::wxResourceClear}\label{wxresourceclear}
\func{void}{wxResourceClear}{\void}
Clears the wxWindows resource table.
-\membersection{::wxResourceCreateBitmap}
+\membersection{::wxResourceCreateBitmap}\label{wxresourcecreatebitmap}
\func{wxBitmap *}{wxResourceCreateBitmap}{\param{const wxString\& }{resource}}
the following:
\begin{verbatim}
-static const wxString\& aiai_resource = "bitmap(name = 'aiai_resource',\
- bitmap = ['aiai', wxBITMAP_TYPE_BMP_RESOURCE, 'WINDOWS'],\
- bitmap = ['aiai.xpm', wxBITMAP_TYPE_XPM, 'X']).";
+static const wxString\& project_resource = "bitmap(name = 'project_resource',\
+ bitmap = ['project', wxBITMAP_TYPE_BMP_RESOURCE, 'WINDOWS'],\
+ bitmap = ['project.xpm', wxBITMAP_TYPE_XPM, 'X']).";
\end{verbatim}
then this function can be called as follows:
\begin{verbatim}
- wxBitmap *bitmap = wxResourceCreateBitmap("aiai_resource");
+ wxBitmap *bitmap = wxResourceCreateBitmap("project_resource");
\end{verbatim}
-\membersection{::wxResourceCreateIcon}
+\membersection{::wxResourceCreateIcon}\label{wxresourcecreateicon}
\func{wxIcon *}{wxResourceCreateIcon}{\param{const wxString\& }{resource}}
the following:
\begin{verbatim}
-static const wxString\& aiai_resource = "icon(name = 'aiai_resource',\
- icon = ['aiai', wxBITMAP_TYPE_ICO_RESOURCE, 'WINDOWS'],\
- icon = ['aiai', wxBITMAP_TYPE_XBM_DATA, 'X']).";
+static const wxString\& project_resource = "icon(name = 'project_resource',\
+ icon = ['project', wxBITMAP_TYPE_ICO_RESOURCE, 'WINDOWS'],\
+ icon = ['project', wxBITMAP_TYPE_XBM_DATA, 'X']).";
\end{verbatim}
then this function can be called as follows:
\begin{verbatim}
- wxIcon *icon = wxResourceCreateIcon("aiai_resource");
+ wxIcon *icon = wxResourceCreateIcon("project_resource");
\end{verbatim}
-\membersection{::wxResourceCreateMenuBar}
+\membersection{::wxResourceCreateMenuBar}\label{wxresourcecreatemenubar}
\func{wxMenuBar *}{wxResourceCreateMenuBar}{\param{const wxString\& }{resource}}
\end{verbatim}
-\membersection{::wxResourceGetIdentifier}
+\membersection{::wxResourceGetIdentifier}\label{wxresourcegetidentifier}
\func{int}{wxResourceGetIdentifier}{\param{const wxString\& }{name}}
title = 'Test dialog box',
x = 312, y = 234, width = 400, height = 300,
modal = 0,
- control = [wxGroupBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
+ control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
[11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
- control = [wxMultiText, 'Multitext', 'wxVERTICAL_LABEL', 'multitext3',
+ control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
[11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
[11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
Each of the contained resources will declare a new C++ variable, and each
of these variables should be passed to wxResourceParseData.
-\membersection{::wxResourceParseFile}
+\membersection{::wxResourceParseFile}\label{wxresourceparsefile}
\func{bool}{wxResourceParseFile}{\param{const wxString\& }{filename}, \param{wxResourceTable *}{table = NULL}}
\membersection{::wxResourceParseString}\label{wxresourceparsestring}
-\func{bool}{wxResourceParseString}{\param{const wxString\& }{resource}, \param{wxResourceTable *}{table = NULL}}
+\func{bool}{wxResourceParseString}{\param{char *}{s}, \param{wxResourceTable *}{table = NULL}}
Parses a string containing one or more wxWindows resource objects. If
the resource objects are global static data that are included into the
{\it resource} should contain data with the following form:
\begin{verbatim}
-static const wxString\& dialog1 = "dialog(name = 'dialog1',\
- style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',\
- title = 'Test dialog box',\
- x = 312, y = 234, width = 400, height = 300,\
- modal = 0,\
- control = [wxGroupBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,\
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],\
- control = [wxMultiText, 'Multitext', 'wxVERTICAL_LABEL', 'multitext3',\
- 156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',\
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],\
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).";
+dialog(name = 'dialog1',
+ style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
+ title = 'Test dialog box',
+ x = 312, y = 234, width = 400, height = 300,
+ modal = 0,
+ control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
+ [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
+ control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
+ 156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
+ [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
+ [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
\end{verbatim}
This function will typically be used after calling \helpref{wxLoadUserResource}{wxloaduserresource} to
\membersection{::wxResourceRegisterBitmapData}\label{registerbitmapdata}
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{const wxString\& }{xbm\_data}, \param{int }{width},
+\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char *}{xbm\_data}, \param{int }{width},
\param{int }{height}, \param{wxResourceTable *}{table = NULL}}
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{const wxString\& *}{xpm\_data}}
+\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char **}{xpm\_data}}
+
+Makes \tt{#}included XBM or XPM bitmap data known to the wxWindows resource system.
+This is required if other resources will use the bitmap data, since otherwise there
+is no connection between names used in resources, and the global bitmap data.
+
+\membersection{::wxResourceRegisterIconData}\label{wxresourceregistericondata}
+
+Another name for \helpref{wxResourceRegisterBitmapData}{registerbitmapdata}.
+
+\section{Log functions}\label{logfunctions}
+
+These functions provide a variety of logging functions: see \helpref{Log classes overview}{wxlogoverview} for
+further information. The functions use (implicitly) the currently active log
+target, so their descriptions here may not apply if the log target is not the
+standard one (installed by wxWindows in the beginning of the program).
+
+\wxheading{Include files}
+
+<wx/log.h>
+
+\membersection{::wxDebugMsg}\label{wxdebugmsg}
+
+\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
+
+{\bf This function is deprecated, use \helpref{wxLogDebug}{wxlogdebug} instead!}
+
+Display a debugging message; under Windows, this will appear on the
+debugger command window, and under Unix, it will be written to standard
+error.
+
+The syntax is identical to {\bf printf}: pass a format string and a
+variable list of arguments.
+
+{\bf Tip:} under Windows, if your application crashes before the
+message appears in the debugging window, put a wxYield call after
+each wxDebugMsg call. wxDebugMsg seems to be broken under WIN32s
+(at least for Watcom C++): preformat your messages and use OutputDebugString
+instead.
+
+This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxError}\label{wxerror}
+
+\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Internal Error"}}
+
+This function is now obsolete, please use \helpref{wxLogError}{wxlogerror}
+instead.
+
+Displays {\it msg} and continues. This writes to standard error under
+Unix, and pops up a message box under Windows. Used for internal
+wxWindows errors. See also \helpref{wxFatalError}{wxfatalerror}.
+
+\wxheading{Include files}
-Makes \verb$#$included XBM or XPM bitmap data known to the wxWindows resource system.
-This is required if other resources will use the bitmap data, since otherwise there
-is no connection between names used in resources, and the global bitmap data.
+<wx/utils.h>
-\membersection{::wxResourceRegisterIconData}
+\membersection{::wxFatalError}\label{wxfatalerror}
-Another name for \helpref{wxResourceRegisterBitmapData}{registerbitmapdata}.
+\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Fatal Error"}}
-\section{Log functions}\label{logfunctions}
+This function is now obsolete, please use
+\helpref{wxLogFatalError}{wxlogfatalerror} instead.
-These functions provide a variety of logging functions: see \helpref{Log classes overview}{wxlogoverview} for
-further information. The functions use (implicitly) the currently active log
-target, so their descriptions here may not apply if the log target is not the
-standard one (installed by wxWindows in the beginning of the program).
+Displays {\it msg} and exits. This writes to standard error under Unix,
+and pops up a message box under Windows. Used for fatal internal
+wxWindows errors. See also \helpref{wxError}{wxerror}.
\wxheading{Include files}
-<wx/log.h>
+<wx/utils.h>
\membersection{::wxLogError}\label{wxlogerror}
-\func{void}{wxLogError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
-The function to use for error messages, i.e. the messages that must be shown
+The functions to use for error messages, i.e. the messages that must be shown
to the user. The default processing is to pop up a message box to inform the
user about it.
\membersection{::wxLogFatalError}\label{wxlogfatalerror}
-\func{void}{wxLogFatalError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogFatalError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogFatalError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
Like \helpref{wxLogError}{wxlogerror}, but also
terminates the program with the exit code 3. Using {\it abort()} standard
\membersection{::wxLogWarning}\label{wxlogwarning}
-\func{void}{wxLogWarning}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogWarning}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogWarning}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
For warnings - they are also normally shown to the user, but don't interrupt
the program work.
\membersection{::wxLogMessage}\label{wxlogmessage}
-\func{void}{wxLogMessage}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogMessage}{\param{const char *}{formatString}, \param{...}{}}
-for all normal, informational messages. They also appear in a message box by
+\func{void}{wxVLogMessage}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+For all normal, informational messages. They also appear in a message box by
default (but it can be changed). Notice that the standard behaviour is to not
show informational messages if there are any errors later - the logic being
that the later error messages make the informational messages preceding them
\membersection{::wxLogVerbose}\label{wxlogverbose}
-\func{void}{wxLogVerbose}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogVerbose}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogVerbose}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
-For verbose output. Normally, it's suppressed, but
+For verbose output. Normally, it is suppressed, but
might be activated if the user wishes to know more details about the program
progress (another, but possibly confusing name for the same function is {\bf wxLogInfo}).
\membersection{::wxLogStatus}\label{wxlogstatus}
-\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+\func{void}{wxLogStatus}{\param{const char *}{formatString}, \param{...}{}}
-\func{void}{wxLogStatus}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxVLogStatus}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
-Messages logged by this function will appear in the statusbar of the {\it
+Messages logged by these functions will appear in the statusbar of the {\it
frame} or of the top level application window by default (i.e. when using
-the second version of the function).
+the second version of the functions).
If the target frame doesn't have a statusbar, the message will be lost.
\membersection{::wxLogSysError}\label{wxlogsyserror}
-\func{void}{wxLogSysError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogSysError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogSysError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
Mostly used by wxWindows itself, but might be handy for logging errors after
system call (API function) failure. It logs the specified message text as well
as the last system error code ({\it errno} or {\it ::GetLastError()} depending
on the platform) and the corresponding error message. The second form
-of this function takes the error code explitly as the first argument.
+of this function takes the error code explicitly as the first argument.
+
+\wxheading{See also}
+
+\helpref{wxSysErrorCode}{wxsyserrorcode},
+\helpref{wxSysErrorMsg}{wxsyserrormsg}
\membersection{::wxLogDebug}\label{wxlogdebug}
-\func{void}{wxLogDebug}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogDebug}{\param{const char *}{formatString}, \param{...}{}}
-The right function for debug output. It only does anything at all in the debug
-mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expands to
+\func{void}{wxVLogDebug}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+The right functions for debug output. They only do something in debug
+mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expand to
nothing in release mode (otherwise).
\membersection{::wxLogTrace}\label{wxlogtrace}
-\func{void}{wxLogTrace}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogTrace}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogTrace}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
\func{void}{wxLogTrace}{\param{const char *}{mask}, \param{const char *}{formatString}, \param{...}{}}
+\func{void}{wxVLogTrace}{\param{const char *}{mask}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
\func{void}{wxLogTrace}{\param{wxTraceMask}{ mask}, \param{const char *}{formatString}, \param{...}{}}
+\func{void}{wxVLogTrace}{\param{wxTraceMask}{ mask}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
As {\bf wxLogDebug}, trace functions only do something in debug build and
expand to nothing in the release one. The reason for making
it a separate function from it is that usually there are a lot of trace
messages, so it might make sense to separate them from other debug messages.
The trace messages also usually can be separated into different categories and
-the second and third versions of this function only log the message if the
+the second and third versions of this function only log the message if the
{\it mask} which it has is currently enabled in \helpref{wxLog}{wxlog}. This
allows to selectively trace only some operations and not others by changing
the value of the trace mask (possible during the run-time).
For the second function (taking a string mask), the message is logged only if
-the mask has been previously enabled by the call to
+the mask has been previously enabled by the call to
\helpref{AddTraceMask}{wxlogaddtracemask}. The predefined string trace masks
used by wxWindows are:
\item wxTraceOleCalls: trace OLE method calls (Win32 only)
\end{itemize}
+\membersection{::wxSysErrorCode}\label{wxsyserrorcode}
+
+\func{unsigned long}{wxSysErrorCode}{\void}
+
+Returns the error code from the last system call. This function uses
+{\tt errno} on Unix platforms and {\tt GetLastError} under Win32.
+
+\wxheading{See also}
+
+\helpref{wxSysErrorMsg}{wxsyserrormsg},
+\helpref{wxLogSysError}{wxlogsyserror}
+
+\membersection{::wxSysErrorMsg}\label{wxsyserrormsg}
+
+\func{const wxChar *}{wxSysErrorMsg}{\param{unsigned long }{errCode = 0}}
+
+Returns the error message corresponding to the given system error code. If
+{\it errCode} is $0$ (default), the last error code (as returned by
+\helpref{wxSysErrorCode}{wxsyserrorcode}) is used.
+
+\wxheading{See also}
+
+\helpref{wxSysErrorCode}{wxsyserrorcode},
+\helpref{wxLogSysError}{wxlogsyserror}
+
+\membersection{WXTRACE}\label{trace}
+
+\wxheading{Include files}
+
+<wx/object.h>
+
+\func{}{WXTRACE}{formatString, ...}
+
+Calls wxTrace with printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+
+This macro is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+\membersection{WXTRACELEVEL}\label{tracelevel}
+
+\func{}{WXTRACELEVEL}{level, formatString, ...}
+
+Calls wxTraceLevel with printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+The first argument should be the level at which this information is appropriate.
+It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
+this value.
+
+This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+\membersection{::wxTrace}\label{wxtrace}
+
+\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
+
+Takes printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+
+This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+\membersection{::wxTraceLevel}\label{wxtracelevel}
+
+\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
+
+Takes printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+The first argument should be the level at which this information is appropriate.
+It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
+this value.
+
+This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+\section{Time functions}\label{timefunctions}
+
+The functions in this section deal with getting the current time and
+starting/stopping the global timers. Please note that the timer functions are
+deprecated because they work with one global timer only and
+\helpref{wxTimer}{wxtimer} and/or \helpref{wxStopWatch}{wxstopwatch} classes
+should be used instead. For retrieving the current time, you may also use
+\helpref{wxDateTime::Now}{wxdatetimenow} or
+\helpref{wxDateTime::UNow}{wxdatetimeunow} methods.
+
+\membersection{::wxGetElapsedTime}\label{wxgetelapsedtime}
+
+\func{long}{wxGetElapsedTime}{\param{bool}{ resetTimer = TRUE}}
+
+Gets the time in milliseconds since the last \helpref{::wxStartTimer}{wxstarttimer}.
+
+If {\it resetTimer} is TRUE (the default), the timer is reset to zero
+by this call.
+
+See also \helpref{wxTimer}{wxtimer}.
+
+\wxheading{Include files}
+
+<wx/timer.h>
+
+\membersection{::wxGetLocalTime}\label{wxgetlocaltime}
+
+\func{long}{wxGetLocalTime}{\void}
+
+Returns the number of seconds since local time 00:00:00 Jan 1st 1970.
+
+\wxheading{See also}
+
+\helpref{wxDateTime::Now}{wxdatetimenow}
+
+\wxheading{Include files}
+
+<wx/timer.h>
+
+\membersection{::wxGetLocalTimeMillis}\label{wxgetlocaltimemillis}
+
+\func{wxLongLone}{wxGetLocalTimeMillis}{\void}
+
+Returns the number of milliseconds since local time 00:00:00 Jan 1st 1970.
+
+\wxheading{See also}
+
+\helpref{wxDateTime::Now}{wxdatetimenow},\\
+\helpref{wxLongLone}{wxlonglong}
+
+\wxheading{Include files}
+
+<wx/timer.h>
+
+\membersection{::wxGetUTCTime}\label{wxgetutctime}
+
+\func{long}{wxGetUTCTime}{\void}
+
+Returns the number of seconds since GMT 00:00:00 Jan 1st 1970.
+
+\wxheading{See also}
+
+\helpref{wxDateTime::Now}{wxdatetimenow}
+
+\wxheading{Include files}
+
+<wx/timer.h>
+
+\membersection{::wxNow}\label{wxnow}
+
+\func{wxString}{wxNow}{\void}
+
+Returns a string representing the current date and time.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxSleep}\label{wxsleep}
+
+\func{void}{wxSleep}{\param{int}{ secs}}
+
+Sleeps for the specified number of seconds.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{::wxStartTimer}\label{wxstarttimer}
+
+\func{void}{wxStartTimer}{\void}
+
+Starts a stopwatch; use \helpref{::wxGetElapsedTime}{wxgetelapsedtime} to get the elapsed time.
+
+See also \helpref{wxTimer}{wxtimer}.
+
+\wxheading{Include files}
+
+<wx/timer.h>
+
+\membersection{::wxUsleep}\label{wxusleep}
+
+\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
+
+Sleeps for the specified number of milliseconds. Notice that usage of this
+function is encouraged instead of calling usleep(3) directly because the
+standard usleep() function is not MT safe.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\section{Debugging macros and functions}\label{debugmacros}
-Useful macros and functins for error checking and defensive programming. ASSERTs are only
-compiled if \_\_WXDEBUG\_\_ is defined, whereas CHECK macros stay in release
-builds.
+Useful macros and functions for error checking and defensive programming.
+wxWindows defines three families of the assert-like macros:
+the wxASSERT and wxFAIL macros only do anything if \_\_WXDEBUG\_\_ is defined
+(in other words, in the debug build) but disappear completely in the release
+build. On the other hand, the wxCHECK macros stay event in release builds but a
+check failure doesn't generate any user-visible effects then. Finally, the
+compile time assertions don't happen during the run-time but result in the
+compilation error messages if the condition they check fail.
\wxheading{Include files}
\membersection{::wxOnAssert}\label{wxonassert}
-\func{void}{wxOnAssert}{\param{const char*}{ fileName}, \param{int}{ lineNumber}, \param{const char*}{ msg = NULL}}
+\func{void}{wxOnAssert}{\param{const char *}{fileName}, \param{int}{ lineNumber}, \param{const char *}{msg = NULL}}
+
+This function is called whenever one of debugging macros fails (i.e. condition
+is false in an assertion). It is only defined in the debug mode, in release
+builds the \helpref{wxCHECK}{wxcheck} failures don't result in anything.
-This function may be redefined to do something non trivial and is called
-whenever one of debugging macros fails (i.e. condition is false in an
-assertion).
-% TODO: this should probably be an overridable in wxApp.
+To override the default behaviour in the debug builds which is to show the user
+a dialog asking whether he wants to abort the program, continue or continue
+ignoring any subsequent assert failures, you may override
+\helpref{wxApp::OnAssert}{wxapponassert} which is called by this function if
+the global application object exists.
\membersection{wxASSERT}\label{wxassert}
Please note that the condition in wxASSERT() should have no side effects
because it will not be executed in release mode at all.
-See also: \helpref{wxASSERT\_MSG}{wxassertmsg}
+\wxheading{See also}
+
+\helpref{wxASSERT\_MSG}{wxassertmsg},\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
+\membersection{wxASSERT\_MIN\_BITSIZE}\label{wxassertminbitsize}
+
+\func{}{wxASSERT\_MIN\_BITSIZE}{\param{}{type}, \param{}{size}}
+
+This macro results in a
+\helpref{compile time assertion failure}{wxCOMPILE\_TIME\_ASSERT} if the size
+of the given type {\it type} is less than {\it size} bits.
+
+You may use it like this, for example:
+
+\begin{verbatim}
+ // we rely on the int being able to hold values up to 2^32
+ wxASSERT_MIN_BITSIZE(int, 32);
+
+ // can't work with the platforms using UTF-8 for wchar_t
+ wxASSERT_MIN_BITSIZE(wchar_t, 16);
+\end{verbatim}
\membersection{wxASSERT\_MSG}\label{wxassertmsg}
Assert macro with message. An error message will be generated if the condition is FALSE.
-See also: \helpref{wxASSERT}{wxassert}
+\wxheading{See also}
+
+\helpref{wxASSERT}{wxassert},\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
+\membersection{wxCOMPILE\_TIME\_ASSERT}\label{wxcompiletimeassert}
+
+\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}}
+
+Using {\tt wxCOMPILE\_TIME\_ASSERT} results in a compilation error if the
+specified {\it condition| is false. The compiler error message should include
+the {\it msg} identifier - please note that it must be a valid C++ identifier
+and not a string unlike in the other cases.
+
+This macro is mostly useful for testing the expressions involing the
+{\tt sizeof} operator as they can't be tested by the preprocessor but it is
+sometimes desirable to test them at the compile time.
+
+Note that this macro internally declares a struct whose name it tries to make
+unique by using the {\tt \_\_LINE\_\_} in it but it may still not work if you
+use it on the same line in two different source files. In this case you may
+either change the line in which either of them appears on or use the
+\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2} macro.
+
+\wxheading{See also}
+
+\helpref{wxASSERT\_MSG}{wxassertmsg},\\
+\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}
+
+\membersection{wxCOMPILE\_TIME\_ASSERT2}\label{wxcompiletimeassert2}
+
+\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}, \param{}{name}}
+
+This macro is identical to \helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2}
+except that it allows you to specify a unique {\it name} for the struct
+internally defined by this macro to avoid getting the compilation errors
+described \helpref{above}{wxcompiletimeassert}.
\membersection{wxFAIL}\label{wxfail}
it may be used in the "default:" branch of a switch statement if all possible
cases are processed above.
-See also: \helpref{wxFAIL}{wxfail}
+\wxheading{See also}
+
+\helpref{wxFAIL}{wxfail}
\membersection{wxCHECK}\label{wxcheck}
Checks that the condition is true, returns with the given return value if not (FAILs in debug mode).
This check is done even in release mode.
-This macro may be only used in non void functions, see also
+This macro may be only used in non void functions, see also
\helpref{wxCHECK\_RET}{wxcheckret}.
\membersection{wxCHECK\_RET}\label{wxcheckret}
Checks that the condition is true, and returns if not (FAILs with given error
message in debug mode). This check is done even in release mode.
-This macro should be used in void functions instead of
+This macro should be used in void functions instead of
\helpref{wxCHECK\_MSG}{wxcheckmsg}.
\membersection{wxCHECK2}\label{wxcheck2}
\func{}{wxCHECK2}{\param{}{condition}, \param{}{operation}}
-Checks that the condition is true and \helpref{wxFAIL}{wxfail} and execute
-{\it operation} if it is not. This is a generalisation of
+Checks that the condition is true and \helpref{wxFAIL}{wxfail} and execute
+{\it operation} if it is not. This is a generalisation of
\helpref{wxCHECK}{wxcheck} and may be used when something else than just
returning from the function must be done when the {\it condition} is false.
\func{}{wxCHECK2}{\param{}{condition}, \param{}{operation}, \param{}{msg}}
-This is the same as \helpref{wxCHECK2}{wxcheck2}, but
+This is the same as \helpref{wxCHECK2}{wxcheck2}, but
\helpref{wxFAIL\_MSG}{wxfailmsg} with the specified {\it msg} is called
instead of wxFAIL() if the {\it condition} is false.
+\membersection{::wxTrap}\label{wxtrap}
+
+\func{void}{wxTrap}{\void}
+
+In debug mode (when {\tt \_\_WXDEBUG\_\_} is defined) this function generates a
+debugger exception meaning that the control is passed to the debugger if one is
+attached to the process. Otherwise the program just terminates abnormally.
+
+In release mode this function does nothing.
+
+\wxheading{Include files}
+
+<wx/debug.h>
+
+\section{Environment access functions}\label{environfunctions}
+
+The functions in this section allow to access (get) or change value of
+environment variables in a portable way. They are currently implemented under
+Win32 and POSIX-like systems (Unix).
+
+% TODO add some stuff about env var inheriting but not propagating upwards (VZ)
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+\membersection{wxGetenv}\label{wxgetenvmacro}
+
+\func{wxChar *}{wxGetEnv}{\param{const wxString\&}{ var}}
+
+This is a macro defined as {\tt getenv()} or its wide char version in Unicode
+mode.
+
+Note that under Win32 it may not return correct value for the variables set
+with \helpref{wxSetEnv}{wxsetenv}, use \helpref{wxGetEnv}{wxgetenv} function
+instead.
+
+\membersection{wxGetEnv}\label{wxgetenv}
+
+\func{bool}{wxGetEnv}{\param{const wxString\&}{ var}, \param{wxString *}{value}}
+
+Returns the current value of the environment variable {\it var} in {\it value}.
+{\it value} may be {\tt NULL} if you just want to know if the variable exists
+and are not interested in its value.
+
+Returns {\tt TRUE} if the variable exists, {\tt FALSE} otherwise.
+
+\membersection{wxSetEnv}\label{wxsetenv}
+
+\func{bool}{wxSetEnv}{\param{const wxString\&}{ var}, \param{const wxChar *}{value}}
+
+Sets the value of the environment variable {\it var} (adding it if necessary)
+to {\it value}.
+
+Returns {\tt TRUE} on success.
+
+\membersection{wxUnsetEnv}\label{wxunsetenv}
+
+\func{bool}{wxUnsetEnv}{\param{const wxString\&}{ var}}
+
+Removes the variable {\it var} from the environment.
+\helpref{wxGetEnv}{wxgetenv} will return {\tt NULL} after the call to this
+function.
+
+Returns {\tt TRUE} on success.
+
projects / wxWidgets.git / blobdiff