dnl the list of all available toolkits
dnl
dnl update NUM_TOOLKITS calculation below when adding a new toolkit here!
-ALL_TOOLKITS="COCOA GTK MAC MGL MICROWIN MOTIF MSW PM X11 DFB"
+ALL_TOOLKITS="COCOA GTK OSX_CARBON OSX_COCOA MGL MICROWIN MOTIF MSW PM X11 DFB"
dnl NB: these wxUSE_XXX constants have value of 0 or 1 unlike all the other ones
dnl which are either yes or no
DEFAULT_wxUSE_COCOA=0
DEFAULT_wxUSE_GTK=0
-DEFAULT_wxUSE_MAC=0
+DEFAULT_wxUSE_OSX_CARBON=0
+DEFAULT_wxUSE_OSX_COCOA=0
DEFAULT_wxUSE_MGL=0
DEFAULT_wxUSE_MICROWIN=0
DEFAULT_wxUSE_MOTIF=0
DEFAULT_wxUSE_X11=0
DEFAULT_wxUSE_DFB=0
-dnl these are the values which are really default for the given platform -
-dnl they're not cached and are only used if no --with-toolkit was given *and*
-dnl nothing was found in the cache
+dnl these are the values which are really default for the given platform:
+dnl they're used if no --with-<toolkit> options were given to detect the
+dnl toolkit to use by default for the target platform
DEFAULT_DEFAULT_wxUSE_COCOA=0
DEFAULT_DEFAULT_wxUSE_GTK=0
-DEFAULT_DEFAULT_wxUSE_MAC=0
+DEFAULT_DEFAULT_wxUSE_OSX_CARBON=0
+DEFAULT_DEFAULT_wxUSE_OSX_COCOA=0
DEFAULT_DEFAULT_wxUSE_MGL=0
DEFAULT_DEFAULT_wxUSE_MICROWIN=0
DEFAULT_DEFAULT_wxUSE_MOTIF=0
AC_DEFINE(__BSD__)
AC_DEFINE(__DARWIN__)
AC_DEFINE(TARGET_CARBON)
- DEFAULT_DEFAULT_wxUSE_MAC=1
+ DEFAULT_DEFAULT_wxUSE_OSX_CARBON=1
DEFAULT_STD_FLAG=no
;;
powerpc-apple-macos* )
SO_SUFFIX=shlib
dnl AC_DEFINE(TARGET_CARBON)
dnl platform.h needs TARGET_CARBON before setup.h, we'll add it to CPPFLAGS
- DEFAULT_DEFAULT_wxUSE_MAC=1
+ DEFAULT_DEFAULT_wxUSE_OSX_CARBON=1
DEFAULT_STD_FLAG=no
;;
dnl
dnl NB: see also DEFAULT_wxUSE<toolkit> variables defined above
-WX_ARG_CACHE_INIT
-
dnl it's only necessary to list the options which should be disabled by
dnl default, all the rest have default value of "yes" (or, rather, of
dnl wxUSE_ALL_FEATURES which is the only which has to be set to "yes" by
DEFAULT_wxUSE_LIBHILDON=no
DEFAULT_wxUSE_LIBMSPACK=no
DEFAULT_wxUSE_LIBSDL=no
-DEFAULT_wxUSE_ODBC=no
DEFAULT_wxUSE_OPENGL=no
dnl features disabled by default
DEFAULT_wxUSE_ACCESSIBILITY=no
-DEFAULT_wxUSE_DATAVIEWCTRL=no
DEFAULT_wxUSE_GRAPHICS_CONTEXT=no
+DEFAULT_wxUSE_IPV6=no
DEFAULT_wxUSE_MEDIACTRL=no
DEFAULT_wxUSE_TAB_DIALOG=no
+DEFAULT_wxUSE_GSTREAMER8=no
DEFAULT_wxUSE_UNICODE_UTF8=auto
DEFAULT_wxUSE_UNICODE_UTF8_LOCALE=no
+dnl Mac/Cocoa users need to enable building universal binaries explicitly
+DEFAULT_wxUSE_UNIVERSAL_BINARY=no
+
DEFAULT_wxUSE_OFFICIAL_BUILD=no
dnl Applicable only when --with-gtk was used:
dnl Always default to no. Only special cases require this.
DEFAULT_wxUSE_OBJC_UNIQUIFYING=no
-
-for toolkit in `echo $ALL_TOOLKITS`; do
- LINE=`grep "wxUSE_$toolkit=" ${wx_arg_cache_file}`
- if test "x$LINE" != "x" ; then
- has_toolkit_in_cache=1
- eval "DEFAULT_$LINE"
- eval "CACHE_$toolkit=1"
-
- LINE=`grep "wx${toolkit}_VERSION=" ${wx_arg_cache_file}`
- if test "x$LINE" != "x" ; then
- eval "DEFAULT_$LINE"
- fi
- fi
-done
-
dnl ===========================
dnl deal with configure options
dnl ===========================
fi
dnl we use AC_ARG_WITH and not WX_ARG_WITH for the toolkit options as they
-dnl shouldn't default to wxUSE_ALL_FEATURES, and we don't need to cache them
-dnl automatically
+dnl shouldn't default to wxUSE_ALL_FEATURES
AC_ARG_WITH(gtk, [[ --with-gtk[=VERSION] use GTK+, VERSION can be 2 (default), 1 or "any"]], [wxUSE_GTK="$withval" CACHE_GTK=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(motif, [ --with-motif use Motif/Lesstif], [wxUSE_MOTIF="$withval" CACHE_MOTIF=1 TOOLKIT_GIVEN=1])
-AC_ARG_WITH(mac, [ --with-mac use Mac OS X], [wxUSE_MAC="$withval" CACHE_MAC=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx_carbon, [ --with-osx_carbon use Mac OS X (Carbon) ], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx_cocoa, [ --with-osx_cocoa use Mac OS X (Cocoa) ], [wxUSE_OSX_COCOA="$withval" CACHE_OSX_COCOA=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(mac, [ --with-mac use Mac OS X (Default) ], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(cocoa, [ --with-cocoa use Cocoa], [wxUSE_COCOA="$withval" CACHE_COCOA=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(wine, [ --with-wine use Wine], [wxUSE_WINE="$withval" CACHE_WINE=1])
AC_ARG_WITH(msw, [ --with-msw use MS-Windows], [wxUSE_MSW="$withval" CACHE_MSW=1 TOOLKIT_GIVEN=1])
AC_ARG_ENABLE(gtk2, [ --disable-gtk2 use GTK+ 1.2 instead of 2.0], [wxUSE_GTK2="$enableval"])
WX_ARG_ENABLE(gpe, [ --enable-gpe use GNOME PDA Environment features if possible], wxUSE_GPE)
+dnl check that no more than one toolkit is given and that if none are given that
+dnl we have a default one
+
+AC_MSG_CHECKING(for toolkit)
+
+
+
+# In Wine, we need to default to MSW, not GTK or MOTIF
+if test "$wxUSE_WINE" = "yes"; then
+ DEFAULT_DEFAULT_wxUSE_GTK=0
+ DEFAULT_DEFAULT_wxUSE_MOTIF=0
+ DEFAULT_DEFAULT_wxUSE_MSW=1
+ wxUSE_SHARED=no
+ CC=${CC:-winegcc}
+ CXX=${CXX:-wineg++}
+fi
+
+
+if test "$wxUSE_GUI" = "yes"; then
+
+ if test "$USE_BEOS" = 1; then
+ AC_MSG_ERROR([BeOS GUI is not supported yet, use --disable-gui])
+ fi
+
+ if test "$TOOLKIT_GIVEN" = 1; then
+ dnl convert "yes", "any" or a number to 1 and "no" to 0
+ for toolkit in $ALL_TOOLKITS; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "x$value" = "xno"; then
+ eval "$var=0"
+ elif test "x$value" != "x"; then
+ eval "$var=1"
+ fi
+
+ if test "x$value" != "x" -a "x$value" != "xyes" -a "x$value" != "xno"; then
+ eval "wx${toolkit}_VERSION=$value"
+ fi
+ done
+ else
+ dnl try to guess the most apropriate toolkit for this platform
+ for toolkit in $ALL_TOOLKITS; do
+ var=DEFAULT_DEFAULT_wxUSE_$toolkit
+ eval "wxUSE_$toolkit=\$${var}"
+ done
+ fi
+
+ dnl we suppose that expr is available (maybe there is a better way to do
+ dnl this? what about using ALL_TOOLKITS? TODO)
+ NUM_TOOLKITS=`expr ${wxUSE_COCOA:-0} + ${wxUSE_GTK:-0} + ${wxUSE_OSX_CARBON:-0} \
+ + ${wxUSE_OSX_COCOA:-0} + ${wxUSE_MGL:-0} + ${wxUSE_DFB:-0} \
+ + ${wxUSE_MICROWIN:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MSW:-0} + ${wxUSE_X11:-0}`
+
+ dnl Allow wxUSE_PM only for OS/2 with EMX.
+ case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
+ esac
+
+ case "$NUM_TOOLKITS" in
+ 1)
+ ;;
+ 0)
+ AC_MSG_ERROR(Please specify a toolkit -- cannot determine the default for ${host})
+ ;;
+ *)
+ AC_MSG_ERROR(Please specify at most one toolkit)
+ esac
+
+ # to be removed when --disable-gtk2 isn't needed
+ if test "x$wxUSE_GTK2" = "xyes"; then
+ wxGTK_VERSION=2
+ elif test "x$wxUSE_GTK2" = "xno"; then
+ wxGTK_VERSION=1
+ fi
+
+ for toolkit in $ALL_TOOLKITS; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "$value" = 1; then
+ toolkit_echo=`echo $toolkit | tr '[[A-Z]]' '[[a-z]]'`
+ AC_MSG_RESULT($toolkit_echo)
+ fi
+ done
+else
+ if test "x$host_alias" != "x"; then
+ AC_MSG_RESULT(base ($host_alias hosted) only)
+ else
+ AC_MSG_RESULT(base only)
+ fi
+fi
+
+wxUSE_MAC=0
+if test "$wxUSE_OSX_CARBON" = 1 -o "$wxUSE_OSX_COCOA" = 1; then
+ wxUSE_MAC=1
+fi
+
dnl ---------------------------------------------------------------------------
dnl external libraries
dnl ---------------------------------------------------------------------------
WX_ARG_SYS_WITH(libjpeg, [ --with-libjpeg use libjpeg (JPEG file format)], wxUSE_LIBJPEG)
WX_ARG_SYS_WITH(libtiff, [ --with-libtiff use libtiff (TIFF file format)], wxUSE_LIBTIFF)
WX_ARG_SYS_WITH(libxpm, [ --with-libxpm use libxpm (XPM file format)], wxUSE_LIBXPM)
+WX_ARG_WITH(libiconv, [ --with-libiconv use libiconv (character conversion)], wxUSE_LIBICONV)
WX_ARG_WITH(libmspack, [ --with-libmspack use libmspack (CHM help files loading)], wxUSE_LIBMSPACK)
+WX_ARG_WITHOUT(gtkprint, [ --without-gtkprint don't use GTK printing support], wxUSE_GTKPRINT)
WX_ARG_WITHOUT(gnomeprint, [ --without-gnomeprint don't use GNOME printing libraries], wxUSE_LIBGNOMEPRINT)
WX_ARG_WITH(gnomevfs, [ --with-gnomevfs use GNOME VFS for associating MIME types], wxUSE_LIBGNOMEVFS)
WX_ARG_WITH(hildon, [ --with-hildon use Hildon framework for Nokia 770], wxUSE_LIBHILDON)
WX_ARG_WITH(sdl, [ --with-sdl use SDL for audio on Unix], wxUSE_LIBSDL)
WX_ARG_SYS_WITH(regex, [ --with-regex enable support for wxRegEx class], wxUSE_REGEX)
WX_ARG_SYS_WITH(zlib, [ --with-zlib use zlib for LZW compression], wxUSE_ZLIB)
-WX_ARG_SYS_WITH(odbc, [ --with-odbc use the IODBC and wxODBC classes], wxUSE_ODBC)
WX_ARG_SYS_WITH(expat, [ --with-expat enable XML support using expat parser], wxUSE_EXPAT)
+AC_MSG_CHECKING([for --with-macosx-sdk])
+AC_ARG_WITH(macosx-sdk, [ --with-macosx-sdk=PATH use an OS X SDK at PATH], [
+ wxUSE_MACOSX_SDK=$withval
+ wx_cv_use_macosx_sdk="wxUSE_MACOSX_SDK=$withval"
+ ])
+AC_MSG_RESULT([$wxUSE_MACOSX_SDK])
+
+AC_MSG_CHECKING([for --with-macosx-version-min])
+AC_ARG_WITH(macosx-version-min, [ --with-macosx-version-min=VER build binaries which require at least this OS X version], [
+ wxUSE_MACOSX_VERSION_MIN=$withval
+ wx_cv_use_macosx_version_min="wxUSE_MACOSX_VERSION_MIN=$withval"
+ ])
+AC_MSG_RESULT([$wxUSE_MACOSX_VERSION_MIN])
+
dnl ---------------------------------------------------------------------------
dnl global compile options
dnl ---------------------------------------------------------------------------
WX_ARG_DISABLE(shared, [ --disable-shared create static library instead of shared], wxUSE_SHARED)
-WX_ARG_DISABLE(optimise, [ --disable-optimise create optimised code], wxUSE_OPTIMISE)
WX_ARG_ENABLE(debug, [ --enable-debug same as debug_flag and debug_info], wxUSE_DEBUG)
WX_ARG_ENABLE(stl, [ --enable-stl use STL for containers], wxUSE_STL)
WX_ARG_ENABLE(std_iostreams, [ --enable-std_iostreams use standard C++ stream classes], wxUSE_STD_IOSTREAM)
WX_ARG_DISABLE(unicode, [ --disable-unicode compile without Unicode support], wxUSE_UNICODE)
WX_ARG_ENABLE(mslu, [ --enable-mslu use MS Layer for Unicode on Windows 9x (Win32 only)], wxUSE_UNICODE_MSLU)
WX_ARG_ENABLE_PARAM(utf8, [ --enable-utf8 use UTF-8 representation for strings (Unix only)], wxUSE_UNICODE_UTF8)
-WX_ARG_ENABLE(utf8only, [ --enable-utf8only only support UTF-8 locales in UTF-8 build (Unix only)], wxUSE_UNICODE_UTF8_LOCALE)
+WX_ARG_ENABLE(utf8only, [ --enable-utf8only only support UTF-8 locales in UTF-8 build (Unix only)], wxUSE_UNICODE_UTF8_LOCALE)
WX_ARG_ENABLE(extended_rtti, [ --enable-extended_rtti use extended RTTI (XTI)], wxUSE_EXTENDED_RTTI)
-if test "$USE_OS2" = "1"; then
+if test "$USE_OS2" = 1; then
DEFAULT_wxUSE_OMF=no
WX_ARG_ENABLE(omf, [ --enable-omf use OMF object format], wxUSE_OMF)
fi
+dnl --enablle-debug is equivalent to both --enable-debug_flag and
+dnl --enable-debug_info
if test "$wxUSE_DEBUG" = "yes"; then
- DEFAULT_wxUSE_DEBUG_FLAG=yes
- DEFAULT_wxUSE_DEBUG_INFO=yes
- BUILD=debug
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=yes
+ BUILD=debug
elif test "$wxUSE_DEBUG" = "no"; then
- DEFAULT_wxUSE_DEBUG_FLAG=no
- DEFAULT_wxUSE_DEBUG_INFO=no
- BUILD=release
+ DEFAULT_wxUSE_DEBUG_FLAG=no
+ DEFAULT_wxUSE_DEBUG_INFO=no
+ BUILD=release
fi
WX_ARG_ENABLE(debug_flag, [ --enable-debug_flag set __WXDEBUG__ flag (recommended for developers!)], wxUSE_DEBUG_FLAG)
WX_ARG_ENABLE(debug_info, [ --enable-debug_info create code with debugging information], wxUSE_DEBUG_INFO)
+
+dnl it's important to also do it in the other direction to get the correct
+dnl output in the configure summary (which uses wxUSE_DEBUG)
+if test "$wxUSE_DEBUG_FLAG" = "yes" -a "$wxUSE_DEBUG_INFO" = "yes"; then
+ wxUSE_DEBUG=yes
+ BUILD=debug
+fi
+
+dnl disable optimizations by default if --enable-debug was used but leave them
+dnl enabled if just --enable-debug_{flag,info} was
+dnl
+dnl in any case, only set the default value and allow overriding it with an
+dnl explicit --enable-optimise
+if test "$wxUSE_DEBUG" = "yes"; then
+ DEFAULT_wxUSE_OPTIMISE=no
+fi
+
+WX_ARG_DISABLE(optimise, [ --disable-optimise compile without optimisations], wxUSE_OPTIMISE)
+
WX_ARG_ENABLE(debug_gdb, [ --enable-debug_gdb create code with extra GDB debugging information], wxUSE_DEBUG_GDB)
WX_ARG_ENABLE(debug_cntxt, [ --enable-debug_cntxt use wxDebugContext], wxUSE_DEBUG_CONTEXT)
WX_ARG_ENABLE(mem_tracing, [ --enable-mem_tracing create code with memory tracing], wxUSE_MEM_TRACING)
WX_ARG_ENABLE(permissive, [ --enable-permissive compile code disregarding strict ANSI], wxUSE_PERMISSIVE)
WX_ARG_ENABLE(no_deps, [ --enable-no_deps create code without dependency information], wxUSE_NO_DEPS)
WX_ARG_DISABLE(vararg_macros,[ --disable-vararg_macros don't use vararg macros, even if they are supported], wxUSE_VARARG_MACROS)
-WX_ARG_ENABLE_PARAM(universal_binary, [[ --enable-universal_binary[=SDK] create Mac PowerPC and Intel Universal binary (not yet working)]], wxUSE_UNIVERSAL_BINARY)
+WX_ARG_ENABLE_PARAM(universal_binary, [[ --enable-universal_binary create Mac PowerPC and Intel Universal binary]], wxUSE_UNIVERSAL_BINARY)
WX_ARG_ENABLE(compat26, [ --enable-compat26 enable wxWidgets 2.6 compatibility], WXWIN_COMPATIBILITY_2_6)
WX_ARG_DISABLE(compat28, [ --disable-compat28 disable wxWidgets 2.8 compatibility], WXWIN_COMPATIBILITY_2_8)
dnl ---------------------------------------------------------------------------
WX_ARG_FEATURE(intl, [ --enable-intl use internationalization system], wxUSE_INTL)
+WX_ARG_FEATURE(xlocale, [ --enable-xlocale use x-locale support (requires wxLocale)], wxUSE_XLOCALE)
WX_ARG_FEATURE(config, [ --enable-config use wxConfig (and derived) classes], wxUSE_CONFIG)
WX_ARG_FEATURE(protocols, [ --enable-protocols use wxProtocol and derived classes], wxUSE_PROTOCOL)
WX_ARG_FEATURE(http, [ --enable-http use wxHTTP (requires wxProtocol], wxUSE_PROTOCOL_HTTP)
WX_ARG_FEATURE(fileproto, [ --enable-fileproto use wxFileProto class (requires wxProtocol], wxUSE_PROTOCOL_FILE)
WX_ARG_FEATURE(sockets, [ --enable-sockets use socket/network classes], wxUSE_SOCKETS)
+WX_ARG_FEATURE(ipv6, [ --enable-ipv6 enable IPv6 support in wxSocket], wxUSE_IPV6)
WX_ARG_FEATURE(ole, [ --enable-ole use OLE classes (Win32 only)], wxUSE_OLE)
WX_ARG_FEATURE(dataobj, [ --enable-dataobj use data object classes], wxUSE_DATAOBJ)
WX_ARG_FEATURE(ipc, [ --enable-ipc use interprocess communication (wxSocket etc.)], wxUSE_IPC)
WX_ARG_FEATURE(baseevtloop, [ --enable-baseevtloop use event loop in console programs too], wxUSE_CONSOLE_EVENTLOOP)
-WX_ARG_FEATURE(epoolloop, [ --enable-epoolloop use wxEpollDispatcher class (Linux only)], wxUSE_EPOLL_DISPATCHER)
+WX_ARG_FEATURE(epollloop, [ --enable-epollloop use wxEpollDispatcher class (Linux only)], wxUSE_EPOLL_DISPATCHER)
WX_ARG_FEATURE(selectloop, [ --enable-selectloop use wxSelectDispatcher class], wxUSE_SELECT_DISPATCHER)
dnl please keep the settings below in alphabetical order
WX_ARG_FEATURE(log, [ --enable-log use logging system], wxUSE_LOG)
WX_ARG_FEATURE(longlong, [ --enable-longlong use wxLongLong class], wxUSE_LONGLONG)
WX_ARG_FEATURE(mimetype, [ --enable-mimetype use wxMimeTypesManager], wxUSE_MIMETYPE)
+WX_ARG_FEATURE(printfposparam,[ --enable-printfposparam use wxVsnprintf() which supports positional parameters], wxUSE_PRINTF_POS_PARAMS)
WX_ARG_FEATURE(snglinst, [ --enable-snglinst use wxSingleInstanceChecker class], wxUSE_SNGLINST_CHECKER)
+WX_ARG_FEATURE(sound, [ --enable-sound use wxSound class], wxUSE_SOUND)
WX_ARG_FEATURE(stdpaths, [ --enable-stdpaths use wxStandardPaths class], wxUSE_STDPATHS)
WX_ARG_FEATURE(stopwatch, [ --enable-stopwatch use wxStopWatch class], wxUSE_STOPWATCH)
WX_ARG_FEATURE(streams, [ --enable-streams use wxStream etc classes], wxUSE_STREAMS)
WX_ARG_FEATURE(textbuf, [ --enable-textbuf use wxTextBuffer class], wxUSE_TEXTBUFFER)
WX_ARG_FEATURE(textfile, [ --enable-textfile use wxTextFile class], wxUSE_TEXTFILE)
WX_ARG_FEATURE(timer, [ --enable-timer use wxTimer class], wxUSE_TIMER)
-WX_ARG_FEATURE(sound, [ --enable-sound use wxSound class], wxUSE_SOUND)
-WX_ARG_FEATURE(mediactrl, [ --enable-mediactrl use wxMediaCtrl class], wxUSE_MEDIACTRL)
-WX_ARG_FEATURE(gstreamer8, [ --enable-gstreamer8 force GStreamer 0.8 instead of 0.10 with the wxMediaCtrl class on unix], wxUSE_GSTREAMER8)
-WX_ARG_FEATURE(printfposparam,[ --enable-printfposparam use wxVsnprintf() which supports positional parameters], wxUSE_PRINTF_POS_PARAMS)
+WX_ARG_FEATURE(variant, [ --enable-variant use wxVariant class], wxUSE_VARIANT)
WX_ARG_FEATURE(zipstream, [ --enable-zipstream use wxZip streams], wxUSE_ZIPSTREAM)
+dnl URL-related classes
WX_ARG_FEATURE(url, [ --enable-url use wxURL class], wxUSE_URL)
-WX_ARG_FEATURE(variant, [ --enable-variant use wxVariant class], wxUSE_VARIANT)
WX_ARG_FEATURE(protocol, [ --enable-protocol use wxProtocol class], wxUSE_PROTOCOL)
WX_ARG_FEATURE(protocol_http, [ --enable-protocol-http HTTP support in wxProtocol], wxUSE_PROTOCOL_HTTP)
WX_ARG_FEATURE(protocol_ftp, [ --enable-protocol-ftp FTP support in wxProtocol], wxUSE_PROTOCOL_FTP)
WX_ARG_FEATURE(threads, [ --enable-threads use threads], wxUSE_THREADS)
+WX_ARG_ENABLE(iniconf, [ --enable-iniconf use wxIniConfig (Win32 only)], wxUSE_INICONF)
+WX_ARG_FEATURE(regkey, [ --enable-regkey use wxRegKey class (Win32 only)], wxUSE_REGKEY)
+
if test "$wxUSE_GUI" = "yes"; then
dnl ---------------------------------------------------------------------------
WX_ARG_FEATURE(aui, [ --enable-aui use AUI docking library], wxUSE_AUI)
WX_ARG_FEATURE(stc, [ --enable-stc use wxStyledTextCtrl library], wxUSE_STC)
WX_ARG_FEATURE(constraints, [ --enable-constraints use layout-constraints system], wxUSE_CONSTRAINTS)
-WX_ARG_FEATURE(printarch, [ --enable-printarch use printing architecture], wxUSE_PRINTING_ARCHITECTURE)
-WX_ARG_FEATURE(mdi, [ --enable-mdi use multiple document interface architecture], wxUSE_MDI)
-WX_ARG_FEATURE(mdidoc, [ --enable-mdidoc use docview architecture with MDI], wxUSE_MDI_ARCHITECTURE)
WX_ARG_FEATURE(loggui, [ --enable-loggui use standard GUI logger], wxUSE_LOGGUI)
WX_ARG_FEATURE(logwin, [ --enable-logwin use wxLogWindow], wxUSE_LOGWINDOW)
WX_ARG_FEATURE(logdialog, [ --enable-logdialog use wxLogDialog], wxUSE_LOGDIALOG)
+WX_ARG_FEATURE(mdi, [ --enable-mdi use multiple document interface architecture], wxUSE_MDI)
+WX_ARG_FEATURE(mdidoc, [ --enable-mdidoc use docview architecture with MDI], wxUSE_MDI_ARCHITECTURE)
+WX_ARG_FEATURE(mediactrl, [ --enable-mediactrl use wxMediaCtrl class], wxUSE_MEDIACTRL)
+WX_ARG_FEATURE(gstreamer8, [ --enable-gstreamer8 force GStreamer 0.8 instead of 0.10 with the wxMediaCtrl class on unix], wxUSE_GSTREAMER8)
WX_ARG_FEATURE(webkit, [ --enable-webkit use wxWebKitCtrl (Mac)], wxUSE_WEBKIT)
WX_ARG_FEATURE(richtext, [ --enable-richtext use wxRichTextCtrl], wxUSE_RICHTEXT)
WX_ARG_FEATURE(graphics_ctx,[ --enable-graphics_ctx use graphics context 2D drawing API], wxUSE_GRAPHICS_CONTEXT)
WX_ARG_FEATURE(postscript, [ --enable-postscript use wxPostscriptDC device context (default for gtk+)], wxUSE_POSTSCRIPT)
+WX_ARG_FEATURE(printarch, [ --enable-printarch use printing architecture], wxUSE_PRINTING_ARCHITECTURE)
WX_ARG_FEATURE(svg, [ --enable-svg use wxSVGFileDC device context], wxUSE_SVG)
dnl ---------------------------------------------------------------------------
DEFAULT_wxUSE_DISPLAY=yes
DEFAULT_wxUSE_DETECT_SM=yes
DEFAULT_wxUSE_DIRPICKERCTRL=yes
+ DEFAULT_wxUSE_FILECTRL=yes
DEFAULT_wxUSE_FILEPICKERCTRL=yes
DEFAULT_wxUSE_FONTPICKERCTRL=yes
DEFAULT_wxUSE_GAUGE=yes
DEFAULT_wxUSE_GRID=yes
DEFAULT_wxUSE_HYPERLINKCTRL=yes
- DEFAULT_wxUSE_DATAVIEWCTRL=no
+ DEFAULT_wxUSE_DATAVIEWCTRL=yes
DEFAULT_wxUSE_IMAGLIST=yes
DEFAULT_wxUSE_LISTBOOK=yes
DEFAULT_wxUSE_LISTBOX=yes
DEFAULT_wxUSE_DISPLAY=no
DEFAULT_wxUSE_DETECT_SM=no
DEFAULT_wxUSE_DIRPICKERCTRL=no
+ DEFAULT_wxUSE_FILECTRL=no
DEFAULT_wxUSE_FILEPICKERCTRL=no
DEFAULT_wxUSE_FONTPICKERCTRL=no
DEFAULT_wxUSE_GAUGE=no
WX_ARG_FEATURE(detect_sm, [ --enable-detect_sm use code to detect X11 session manager], wxUSE_DETECT_SM)
WX_ARG_FEATURE(editablebox, [ --enable-editablebox use wxEditableListBox class], wxUSE_EDITABLELISTBOX)
WX_ARG_FEATURE(filepicker, [ --enable-filepicker use wxFilePickerCtrl class], wxUSE_FILEPICKERCTRL)
+WX_ARG_FEATURE(filectrl, [ --enable-filectrl use wxFileCtrl class], wxUSE_FILECTRL)
WX_ARG_FEATURE(fontpicker, [ --enable-fontpicker use wxFontPickerCtrl class], wxUSE_FONTPICKERCTRL)
WX_ARG_FEATURE(gauge, [ --enable-gauge use wxGauge class], wxUSE_GAUGE)
WX_ARG_FEATURE(grid, [ --enable-grid use wxGrid class], wxUSE_GRID)
WX_ARG_FEATURE(listbox, [ --enable-listbox use wxListBox class], wxUSE_LISTBOX)
WX_ARG_FEATURE(listctrl, [ --enable-listctrl use wxListCtrl class], wxUSE_LISTCTRL)
WX_ARG_FEATURE(notebook, [ --enable-notebook use wxNotebook class], wxUSE_NOTEBOOK)
+WX_ARG_FEATURE(notifmsg, [ --enable-notifmsg use wxNotificationMessage class], wxUSE_NOTIFICATION_MESSAGE)
WX_ARG_FEATURE(odcombobox, [ --enable-odcombobox use wxOwnerDrawnComboBox class], wxUSE_ODCOMBOBOX)
WX_ARG_FEATURE(radiobox, [ --enable-radiobox use wxRadioBox class], wxUSE_RADIOBOX)
WX_ARG_FEATURE(radiobtn, [ --enable-radiobtn use wxRadioButton class], wxUSE_RADIOBTN)
WX_ARG_FEATURE(iff, [ --enable-iff use iff images (IFF file format)], wxUSE_IFF)
WX_ARG_FEATURE(pnm, [ --enable-pnm use pnm images (PNM file format)], wxUSE_PNM)
WX_ARG_FEATURE(xpm, [ --enable-xpm use xpm images (XPM file format)], wxUSE_XPM)
-WX_ARG_FEATURE(ico_cur, [ --enable-icocur use Windows ICO and CUR formats], wxUSE_ICO_CUR)
+WX_ARG_FEATURE(ico_cur, [ --enable-ico_cur use Windows ICO and CUR formats], wxUSE_ICO_CUR)
dnl ---------------------------------------------------------------------------
dnl wxMSW-only options
dnl ---------------------------------------------------------------------------
WX_ARG_FEATURE(dccache, [ --enable-dccache cache temporary wxDC objects (Win32 only)], wxUSE_DC_CACHEING)
+WX_ARG_FEATURE(ps-in-msw, [ --enable-ps-in-msw use PS printing in wxMSW (Win32 only)], wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW)
+WX_ARG_FEATURE(ownerdrawn, [ --enable-ownerdrawn use owner drawn controls (Win32 and OS/2 only)], wxUSE_OWNER_DRAWN)
WX_ARG_FEATURE(uxtheme, [ --enable-uxtheme enable support for Windows XP themed look (Win32 only)], wxUSE_UXTHEME)
+WX_ARG_FEATURE(wxdib, [ --enable-wxdib use wxDIB class (Win32 only)], wxUSE_DIB)
+dnl this one is not really MSW-specific but it exists mainly to be turned off
+dnl under MSW, it should be off by default on the other platforms
+if test "$wxUSE_MSW" != 1; then
+ DEFAULT_wxUSE_AUTOID_MANAGEMENT=no
fi
-dnl for GUI only
-dnl cache the options values before (may be) aborting below
-WX_ARG_CACHE_FLUSH
+WX_ARG_FEATURE(autoidman, [ --enable-autoidman use automatic ids management], wxUSE_AUTOID_MANAGEMENT)
-dnl check that no more than one toolkit is given and that if none are given that
-dnl we have a default one
-
-AC_MSG_CHECKING(for toolkit)
-
-# In Wine, we need to default to MSW, not GTK or MOTIF
-if test "$wxUSE_WINE" = "yes"; then
- DEFAULT_DEFAULT_wxUSE_GTK=0
- DEFAULT_DEFAULT_wxUSE_MOTIF=0
- DEFAULT_DEFAULT_wxUSE_MSW=1
- wxUSE_SHARED=no
- CC=${CC:-winegcc}
- CXX=${CXX:-wineg++}
-fi
-
-
-if test "$wxUSE_GUI" = "yes"; then
-
- if test "$USE_BEOS" = 1; then
- AC_MSG_ERROR([BeOS GUI is not supported yet, use --disable-gui])
- fi
-
- if test "$TOOLKIT_GIVEN" = 1; then
- dnl convert "yes", "any" or a number to 1 and "no" to 0
- for toolkit in `echo $ALL_TOOLKITS`; do
- var=wxUSE_$toolkit
- eval "value=\$${var}"
- if test "x$value" = "xno"; then
- eval "$var=0"
- elif test "x$value" != "x"; then
- eval "$var=1"
- fi
-
- if test "x$value" != "x" -a "x$value" != "xyes" -a "x$value" != "xno"; then
- eval "wx${toolkit}_VERSION=$value"
- fi
- done
- else
- dnl try to guess the most apropriate toolkit for this platform
- for toolkit in `echo $ALL_TOOLKITS`; do
- if test "$has_toolkit_in_cache" != 1; then
- var=DEFAULT_DEFAULT_wxUSE_$toolkit
- else
- var=DEFAULT_wxUSE_$toolkit
-
- eval "version=\$DEFAULT_wx${toolkit}_VERSION"
- if test "x$version" != "x"; then
- eval "wx${toolkit}_VERSION=$version"
- fi
- fi
- eval "wxUSE_$toolkit=\$${var}"
- done
- fi
-
- dnl we suppose that expr is available (maybe there is a better way to do
- dnl this? what about using ALL_TOOLKITS? TODO)
- NUM_TOOLKITS=`expr ${wxUSE_COCOA:-0} + ${wxUSE_GTK:-0} + ${wxUSE_MAC:-0} \
- + ${wxUSE_MGL:-0} + ${wxUSE_DFB:-0} + ${wxUSE_MICROWIN:-0} \
- + ${wxUSE_MOTIF:-0} + ${wxUSE_MSW:-0} + ${wxUSE_X11:-0}`
-
- dnl Allow wxUSE_PM only for OS/2 with EMX.
- case "${host}" in
- *-pc-os2_emx | *-pc-os2-emx )
- NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
- esac
-
- case "$NUM_TOOLKITS" in
- 1)
- ;;
- 0)
- AC_MSG_ERROR(Please specify a toolkit -- cannot determine the default for ${host})
- ;;
- *)
- AC_MSG_ERROR(Please specify at most one toolkit (maybe some are cached in configarg.cache?))
- esac
-
- # to be removed when --disable-gtk2 isn't needed
- if test "x$wxUSE_GTK2" = "xyes"; then
- wxGTK_VERSION=2
- elif test "x$wxUSE_GTK2" = "xno"; then
- wxGTK_VERSION=1
- fi
-
- dnl cache the wxUSE_<TOOLKIT> values too
- for toolkit in `echo $ALL_TOOLKITS`; do
- var=wxUSE_$toolkit
- eval "value=\$${var}"
- if test "x$value" != x; then
- cache_var=CACHE_$toolkit
- eval "cache=\$${cache_var}"
- if test "$cache" = 1; then
- echo "$var=$value" >> ${wx_arg_cache_file}
- eval "version=\$wx${toolkit}_VERSION"
- if test "x$version" != "x"; then
- echo "wx${toolkit}_VERSION=$version" >> ${wx_arg_cache_file}
- fi
- fi
- if test "$value" = 1; then
- toolkit_echo=`echo $toolkit | tr "[[A-Z]]" "[[a-z]]"`
- AC_MSG_RESULT($toolkit_echo)
- fi
- fi
- done
-else
- if test "x$host_alias" != "x"; then
- AC_MSG_RESULT(base ($host_alias hosted) only)
- else
- AC_MSG_RESULT(base only)
- fi
fi
+dnl for GUI only
dnl ---------------------------------------------------------------------------
dnl Checks for programs
AC_MSG_ERROR([C++ compiler is needed to build wxWidgets])
fi
-dnl ranlib command
-dnl defines RANLIB with the appropriate command
-AC_PROG_RANLIB
-
dnl ar command
dnl defines AR with the appropriate command
dnl
fi
fi
-dnl install checks
-dnl defines INSTALL with the appropriate command
-AC_PROG_INSTALL
-
-dnl make install path absolute (if not already);
-dnl will fail with (some) MSDOS paths
-case ${INSTALL} in
- /* ) # Absolute
- ;;
- ?:* ) # Drive letter, considered as absolute.
- ;;
- *)
- INSTALL=`pwd`/${INSTALL} ;;
-esac
-
-
-case "${host}" in
-
- dnl The other BSD's should probably go in here too, since this is
- dnl to workaround a strange static lib BSDism.
- dnl Mac OS X install seems to ignore -p option...
- *-*-darwin* )
- INSTALL_PROGRAM="cp -fp"
- INSTALL_DATA="cp -fp"
- ;;
- *)
- ;;
-esac
+retest_macosx_linking=no
-dnl strip command
-dnl defines STRIP as strip or nothing (true) if not found
-AC_CHECK_TOOL(STRIP, strip, true)
+dnl Support the old --enable-universal_binary in case anyone was using it.
+#if test "$wxUSE_MAC" = 1; then
+ if test "x$wxUSE_UNIVERSAL_BINARY" != xno ; then
+ dnl --enable-universal_binary uses a default SDK (currently 10.4u)
+ dnl --enable-universal_binary=SDK names a path to an SDK
+ if test "x$wxUSE_UNIVERSAL_BINARY" == xyes; then
+ # Implicitly turn on the new --with-macosx-sdk using the default
+ # SDK which provides the behavior this option has always had.
+ if test "x$wxUSE_MACOSX_SDK" = "x"; then
+ AC_MSG_WARN([Enabling default SDK due to --enable-universal_binary.])
+ AC_MSG_WARN([If you don't want this, specify --without-macosx-sdk])
+ wxUSE_MACOSX_SDK=yes
+ fi
+ else
+ # Complain to user if he specified an argument to --enable-universal_binary
+ # and also 1) specified --with-macosx-sdk using the default (yes) or
+ # 2) specified --with-macosx-sdk using a path or 3) specified
+ # --without-macosx-sdk (no).
+ if test "x$wxUSE_MACOSX_SDK" != "x" ; then
+ AC_MSG_FAILURE([Please specify the new --with-macosx-sdk=PATH and do not specify an arg to --enable-universal_binary])
+ else
+ # Put the SDK path into the wxUSE_MACOSX_SDK. We don't have to
+ # special-case the empty string because the below test simply
+ # converts "no" to the empty string anyway.
+ wxUSE_MACOSX_SDK="$wxUSE_UNIVERSAL_BINARY"
+ dnl Warn about deprecated usage.
+ AC_MSG_WARN([Please use --with-macosx-sdk=PATH and --enable-universal_binary without an argument])
+ fi
+ fi
+ dnl FIXME: I think it would be better to put this into CC, CXX, and LD rather than the flags.
+ OSX_UNIV_OPTS="-arch ppc -arch i386"
+ CXXFLAGS="$OSX_UNIV_OPTS $CXXFLAGS"
+ CFLAGS="$OSX_UNIV_OPTS $CFLAGS"
+ OBJCXXFLAGS="$OSX_UNIV_OPTS $OBJCXXFLAGS"
+ OBJCFLAGS="$OSX_UNIV_OPTS $OBJCFLAGS"
+ LDFLAGS="$OSX_UNIV_OPTS $LDFLAGS"
+ dnl NOTE: Only the compiler driver needs arch flags. The link editor
+ dnl is incapable of using them but the compiler driver (which we use
+ dnl as LD when building dynamic libraries) uses them to invoke the
+ dnl real ld multiple times. If we moved to libtool -dynamic we would
+ dnl need no arch flags because libtool automatically invokes ld for
+ dnl every architecture found in the fat input files.
+ dnl
+ dnl For static library builds, AR/RANLIB automatically create proper
+ dnl fat archives although AR is unable to update them once RANLIB has
+ dnl made them into proper fat archives. Fortunately, our link process
+ dnl simply removes the .a file before using ar to create a new one.
+ dnl If we did move to libtool -static we still wouldn't need arch flags
+ dnl because libtool automatically figures it out based on input.
+ retest_macosx_linking=yes
+
+ dnl HACK: PCH could be made to work by precompiling for each architecture into separate directories
+ dnl and including all architecture directories with each compiler invocation.
+ dnl That would require a major rework of Bakefile and at the same time it would be nice to have
+ dnl Objective-C++ precompiled headers.
+ AC_MSG_WARN([Disabling precompiled headers due to universal binary build.])
+ bk_use_pch=no
+ fi
+#fi
-dnl Win32 tools
-if test "$wxUSE_WINE" = "yes"; then
- AC_CHECK_TOOL(WINDRES, wrc)
- RESCOMP="$WINDRES"
-else
- case "${host}" in
- *-*-cygwin* | *-*-mingw32* )
- dnl Bakefile CVS (as of 2005-11-24) now detects windres properly
- dnl ... maybe it does, but it does not make it available here
- dnl anymore, so do it ourselves still.
- AC_CHECK_TOOL(WINDRES, windres)
- RESCOMP="$WINDRES"
- AC_CHECK_TOOL(DLLTOOL, dlltool)
- ;;
- esac
+dnl Set up the Mac OS X SDK. We do this early so configure tests will occur
+dnl with the SDK in place.
+dnl NOTE: We clobber wxUSE_MACOSX_SDK with the SDK path
+if test "x$wxUSE_MACOSX_SDK" = "xno"; then
+ wxUSE_MACOSX_SDK=
+elif test "x$wxUSE_MACOSX_SDK" = "xyes"; then
+ # TODO: Search for most recent SDK and use it.
+ wxUSE_MACOSX_SDK="/Developer/SDKs/MacOSX10.4u.sdk"
fi
-dnl does make support "-include" (only GNU make does AFAIK)?
-AC_CACHE_CHECK([if make is GNU make], wx_cv_prog_makeisgnu,
+
+if test "x$wxUSE_MACOSX_SDK" != "x"; then
+ AC_MSG_CHECKING([for SDK directory $wxUSE_MACOSX_SDK])
+ if ! test -d "$wxUSE_MACOSX_SDK"; then
+ AC_MSG_FAILURE([not found])
+ else
+ AC_MSG_RESULT([exists])
+ fi
+ MACOSX_SDK_OPTS="-isysroot $wxUSE_MACOSX_SDK"
+ eval "CC=\"$CC $MACOSX_SDK_OPTS\""
+ eval "CXX=\"$CXX $MACOSX_SDK_OPTS\""
+ eval "LD=\"$LD $MACOSX_SDK_OPTS\""
+ retest_macosx_linking=yes
+ dnl NOTE: When libtool is used in lieu of AR/RANLIB (i.e. in static mode)
+ dnl the syslibroot makes no difference. We aren't using libtool now but
+ dnl if we ever did, be aware that you don't need to worry about it.
+fi
+
+dnl Set up the deployment target
+dnl No : Don't specify a min version even if using an SDK
+dnl Yes : Use the version from the SDK if used, otherwise same as no
+dnl Param: Use the specified version
+if test "x$wxUSE_MACOSX_VERSION_MIN" = "xno"; then
+ wxUSE_MACOSX_VERSION_MIN=
+elif test "x$wxUSE_MACOSX_VERSION_MIN" = "xyes"; then
+ if test "x$wxUSE_MACOSX_SDK" != "x"; then
+ AC_MSG_CHECKING([SDK deployment version])
+dnl We need to quote the next line where we don't need macros and do need [] in the regex
+[
+ MACOSX_SDK_PLIST_VERSION_MIN=`defaults read "$wxUSE_MACOSX_SDK/SDKSettings" buildSettings | grep '^ *"\{0,1\}MACOSX_DEPLOYMENT_TARGET"\{0,1\} *= *"\{0,1\}[^"]*"\{0,1\}; *$' | sed 's/^ *"\{0,1\}MACOSX_DEPLOYMENT_TARGET"\{0,1\} *= *"\{0,1\}\([^"]*\)"\{0,1\} *; *$/\1/'`
+]
+ # If that failed, try again with the new key
+ if test "x$MACOSX_SDK_PLIST_VERSION_MIN" == "x"; then
[
- if ( ${SHELL-sh} -c "${MAKE-make} --version" 2> /dev/null |
- $EGREP -s GNU > /dev/null); then
- wx_cv_prog_makeisgnu="yes"
+ MACOSX_SDK_PLIST_VERSION_MIN=`defaults read "$wxUSE_MACOSX_SDK/SDKSettings" DefaultProperties | grep '^ *"\{0,1\}MACOSX_DEPLOYMENT_TARGET"\{0,1\} *= *"\{0,1\}[^"]*"\{0,1\}; *$' | sed 's/^ *"\{0,1\}MACOSX_DEPLOYMENT_TARGET"\{0,1\} *= *"\{0,1\}\([^"]*\)"\{0,1\} *; *$/\1/'`
+]
+ fi
+
+ if test "x$MACOSX_SDK_PLIST_VERSION_MIN" != "x"; then
+ wxUSE_MACOSX_VERSION_MIN=$MACOSX_SDK_PLIST_VERSION_MIN
+ AC_MSG_RESULT([$wxUSE_MACOSX_VERSION_MIN])
+ else
+ AC_MSG_WARN([Could not determine deployment target from SDKSettings.plist])
+ wxUSE_MACOSX_VERSION_MIN=
+ fi
else
- wx_cv_prog_makeisgnu="no"
+ wxUSE_MACOSX_VERSION_MIN=
+ fi
+elif test "x$wxUSE_MACOSX_VERSION_MIN" = "x"; then
+ if test "$wxUSE_MAC" = 1; then
+ # otherwise configure stops on leopard for universal_binary
+ wxUSE_MACOSX_VERSION_MIN=10.4
fi
-])
-
-if test "x$wx_cv_prog_makeisgnu" = "xyes"; then
- IF_GNU_MAKE=""
-else
- IF_GNU_MAKE="#"
fi
-AC_SUBST(IF_GNU_MAKE)
+if test "x$wxUSE_MACOSX_VERSION_MIN" != "x"; then
+ MACOSX_VERSION_MIN_OPTS="-mmacosx-version-min=$wxUSE_MACOSX_VERSION_MIN"
+ eval "CC=\"$CC $MACOSX_VERSION_MIN_OPTS\""
+ eval "CXX=\"$CXX $MACOSX_VERSION_MIN_OPTS\""
+ eval "LD=\"$LD $MACOSX_VERSION_MIN_OPTS\""
+ retest_macosx_linking=yes
+fi
-dnl we don't need to check for VPATH support in GNU make - it does have it
-if test "x$wx_cv_prog_makeisgnu" != "xyes"; then
-dnl check if VPATH works
-AC_CACHE_CHECK([if make supports VPATH], wx_cv_prog_makevpath, [
-dnl create Makefile
-cat - << EOF > confMake
-check : file
- cp \$? \$@
- cp \$? final_file
-EOF
+dnl If either an SDK or a version option was added, make sure that we can
+dnl still compile and link both C and C++. If we didn't do this, then most
+dnl of the remaining tests would fail.
+if test "x$retest_macosx_linking" = "xyes"; then
+ AC_LANG_PUSH(C)
+ AC_MSG_CHECKING([if C compiler works with SDK/version options])
+ AC_TRY_LINK([],[],[AC_MSG_RESULT([yes])],[AC_MSG_FAILURE([no. Try a different SDK]); exit 1])
+ AC_LANG_POP()
-if test ! -d sub ; then
- mkdir sub
-fi
-echo dummy > sub/file
-${MAKE-make} -f confMake VPATH=sub 2>&5 > /dev/null
-RESULT=$?
-rm -f sub/file check final_file confMake
-rmdir sub
-if test "$RESULT" = 0; then
- wx_cv_prog_makevpath="yes"
-else
- wx_cv_prog_makevpath="no"
+ AC_LANG_PUSH(C++)
+ AC_MSG_CHECKING([if C++ compiler works with SDK/version options])
+ AC_TRY_LINK([],[],[AC_MSG_RESULT([yes])],[AC_MSG_FAILURE([no. Try a different SDK]); exit 1])
+ AC_LANG_POP()
fi
-])
-if test "x$wx_cv_prog_makevpath" != "xyes"; then
-AC_MSG_ERROR([
-You need a make-utility that is able to use the variable
-VPATH correctly.
-If your version of make does not support VPATH correctly,
-please install GNU-make (possibly as gmake), and start
-configure with the following command:
-export MAKE=gmake; ./configure for sh-type shells
-setenv MAKE gmake; ./configure for csh-type shells
-Also please do remember to use gmake in this case every time
-you are trying to compile.
-])
-fi dnl make without VPATH
-fi dnl not GNU make
-dnl needed for making link to setup.h
-AC_PROG_LN_S
+case "${host}" in
+ dnl The other BSD's should probably go in here too, since this is
+ dnl to workaround a strange static lib BSDism.
+ dnl Mac OS X install seems to ignore -p option...
+ *-*-darwin* )
+ INSTALL_PROGRAM="cp -fp"
+ INSTALL_DATA="cp -fp"
+ ;;
+ *)
+ ;;
+esac
dnl ------------------------------------------------------------------------
dnl Platform specific tests
dnl Note: non-empty last parameter makes check compile-only,
dnl skipping worthless preprocessing check
-AC_CHECK_HEADERS(stdlib.h fnmatch.h langinfo.h malloc.h unistd.h wchar.h,,, [AC_INCLUDES_DEFAULT()])
+AC_CHECK_HEADERS(langinfo.h wchar.h,,, [AC_INCLUDES_DEFAULT])
dnl maybe wchar_t is in wcstr.h if we don't have wchar.h?
if test "$ac_cv_header_wchar_h" != "yes"; then
;;
*-hp-hpux* )
AC_CHECK_SIZEOF(long long, 0)
- if test "$ac_cv_sizeof_long_long" != "0"; then
+ if test "$ac_cv_sizeof_long_long" != 0; then
dnl HPUX 10.20 headers need this define in order to use long long definitions
CPPFLAGS="-D_INCLUDE_LONGLONG $CPPFLAGS"
fi
#include <stdio.h>
]
)
-if test "$ac_cv_sizeof_wchar_t" != "0"; then
+if test "$ac_cv_sizeof_wchar_t" != 0; then
wxUSE_WCHAR_T=yes
else
wxUSE_WCHAR_T=no
if test "$wx_cv_class_stdbasicstring" != yes; then
if test "$wxUSE_STL" = "yes"; then
AC_MSG_ERROR([Can't use --enable-stl without $std_string or std::basic_string<$char_type>])
- elif grep wxUSE_STD_STRING $wx_arg_cache_file >/dev/null; then
+ elif test "$wxUSE_STD_STRING" = "yes"; then
AC_MSG_ERROR([Can't use --enable-std_string without $std_string or std::basic_string<$char_type>])
else
AC_MSG_WARN([No $std_string or std::basic_string<$char_type>, switching to --disable-std_string])
[#include <iostream>])
if test "$wxUSE_STD_IOSTREAM" != "yes"; then
- if grep wxUSE_STD_IOSTREAM $wx_arg_cache_file >/dev/null; then
+ if test "$wxUSE_STD_IOSTREAM" = "yes"; then
AC_MSG_ERROR([Can't use --enable-std_iostreams without std::istream and std::ostream])
else
AC_MSG_WARN([No std::iostreams, switching to --disable-std_iostreams])
AC_DEFINE(HAVE_STD_STRING_COMPARE)
fi
- dnl check for hash_map and hash_set headers
- AC_CHECK_HEADER([hash_map],
- [AC_CACHE_CHECK([for standard hash_map and hash_set],
- wx_cv_class_stdhashmapset,
- [AC_TRY_COMPILE([#include <hash_map>
- #include <hash_set>],
- [std::hash_map<double*, char*, std::hash<double*>, std::equal_to<double*> > test1;
- std::hash_set<char*, std::hash<char*>, std::equal_to<char*> > test2;],
- wx_cv_class_stdhashmapset=yes,
- wx_cv_class_stdhashmapset=no)
- ]
- )],
- [],
- [ ]
- )
-
- if test "$wx_cv_class_stdhashmapset" = yes; then
- AC_DEFINE(HAVE_HASH_MAP)
- AC_DEFINE(HAVE_STD_HASH_MAP)
+ if test "$wx_cv_class_gnuhashmapset" = yes; then
+ AC_DEFINE(HAVE_EXT_HASH_MAP)
+ AC_DEFINE(HAVE_GNU_CXX_HASH_MAP)
fi
- AC_CHECK_HEADER([ext/hash_map],
- [AC_CACHE_CHECK([for GNU hash_map and hash_set],
- wx_cv_class_gnuhashmapset,
- [AC_TRY_COMPILE([#include <ext/hash_map>
- #include <ext/hash_set>],
- [__gnu_cxx::hash_map<double*, char*, __gnu_cxx::hash<double*>, std::equal_to<double*> > test1;
- __gnu_cxx::hash_set<char*, __gnu_cxx::hash<char*>, std::equal_to<char*> > test2;],
- wx_cv_class_gnuhashmapset=yes,
- wx_cv_class_gnuhashmapset=no)
+ AC_CHECK_HEADER([unordered_map],
+ [AC_CACHE_CHECK([for unordered_map and unordered_set in std],
+ wx_cv_class_stdunorderedmapset,
+ [AC_TRY_COMPILE([#include <unordered_map>
+ #include <unordered_set>],
+ [std::unordered_map<double*, char*> test1;
+ std::unordered_set<char*> test2;],
+ wx_cv_class_stdunorderedmapset=yes,
+ wx_cv_class_stdunorderedmapset=no)
]
)],
[],
[ ]
)
- if test "$wx_cv_class_gnuhashmapset" = yes; then
- AC_DEFINE(HAVE_EXT_HASH_MAP)
- AC_DEFINE(HAVE_GNU_CXX_HASH_MAP)
+ if test "$wx_cv_class_stdunorderedmapset" = yes; then
+ AC_DEFINE(HAVE_STD_UNORDERED_MAP)
+ AC_DEFINE(HAVE_STD_UNORDERED_SET)
+ else
+ AC_CHECK_HEADER([tr1/unordered_map],
+ [AC_CACHE_CHECK([for unordered_map and unordered_set in std::tr1],
+ wx_cv_class_tr1unorderedmapset,
+ [AC_TRY_COMPILE([#include <tr1/unordered_map>
+ #include <tr1/unordered_set>],
+ [std::tr1::unordered_map<double*, char*> test1;
+ std::tr1::unordered_set<char*> test2;
+ #if defined(__GNUC__) && (__GNUC__==4) && (__GNUC_MINOR__<2)
+ #error can't use unordered_{map,set} with gcc-4.[01]: http://gcc.gnu.org/PR24389
+ #endif],
+ wx_cv_class_tr1unorderedmapset=yes,
+ wx_cv_class_tr1unorderedmapset=no)
+ ]
+ )],
+ [],
+ [ ]
+ )
+
+ if test "$wx_cv_class_tr1unorderedmapset" = yes; then
+ AC_DEFINE(HAVE_TR1_UNORDERED_MAP)
+ AC_DEFINE(HAVE_TR1_UNORDERED_SET)
+ else
+ dnl check for hash_map and hash_set headers
+ AC_CHECK_HEADER([hash_map],
+ [AC_CACHE_CHECK([for std::hash_map and hash_set],
+ wx_cv_class_stdhashmapset,
+ [AC_TRY_COMPILE([#include <hash_map>
+ #include <hash_set>],
+ [std::hash_map<double*, char*, std::hash<double*>, std::equal_to<double*> > test1;
+ std::hash_set<char*, std::hash<char*>, std::equal_to<char*> > test2;],
+ wx_cv_class_stdhashmapset=yes,
+ wx_cv_class_stdhashmapset=no)
+ ]
+ )],
+ [],
+ [ ]
+ )
+
+ if test "$wx_cv_class_stdhashmapset" = yes; then
+ AC_DEFINE(HAVE_HASH_MAP)
+ AC_DEFINE(HAVE_STD_HASH_MAP)
+ fi
+
+ AC_CHECK_HEADER([ext/hash_map],
+ [AC_CACHE_CHECK([for GNU hash_map and hash_set],
+ wx_cv_class_gnuhashmapset,
+ [AC_TRY_COMPILE([#include <ext/hash_map>
+ #include <ext/hash_set>],
+ [__gnu_cxx::hash_map<double*, char*, __gnu_cxx::hash<double*>, std::equal_to<double*> > test1;
+ __gnu_cxx::hash_set<char*, __gnu_cxx::hash<char*>, std::equal_to<char*> > test2;],
+ wx_cv_class_gnuhashmapset=yes,
+ wx_cv_class_gnuhashmapset=no)
+ ]
+ )],
+ [],
+ [ ]
+ )
+
+ fi
fi
fi
+dnl check for atomic operations builtins for wx/atomic.h:
+WX_ATOMIC_BUILTINS
+
dnl pop C++
AC_LANG_POP()
dnl systems which have both (AIX 4.x does)
SEARCH_INCLUDE="\
/usr/local/include \
+ /usr/local/X11/include \
+ /usr/local/include/X11 \
+ /usr/local/X11R6/include \
+ /usr/local/include/X11R6 \
\
/usr/Motif-2.1/include \
/usr/Motif-1.2/include \
\
/usr/X11R6/include \
/usr/X11R6.4/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
\
/usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
\
/usr/X11/include \
/usr/include/X11 \
- /usr/local/X11/include \
- /usr/local/include/X11 \
\
/usr/XFree86/include/X11 \
/usr/pkg/include \
\
+ /usr/local/X1R5/include \
+ /usr/local/include/X11R5 \
+ /usr/X11R5/include \
+ /usr/include/X11R5 \
+ \
+ /usr/local/X11R4/include \
+ /usr/local/include/X11R4 \
+ /usr/X11R4/include \
+ /usr/include/X11R4 \
+ \
/usr/openwin/share/include"
dnl try to find out the standard lib locations for the systems with multiple
AC_DEFINE(wxUSE_REGEX)
if test "$wxUSE_UNICODE" = "yes" -a "$wxUSE_REGEX" = "yes"; then
- AC_MSG_WARN([Defaulting to the the builtin regex library for Unicode build.])
+ AC_MSG_WARN([Defaulting to the builtin regex library for Unicode build.])
wxUSE_REGEX=builtin
fi
fi
fi
fi
-
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS png"
fi
dnl ------------------------------------------------------------------------
dnl Check for jpeg library
dnl ------------------------------------------------------------------------
+dnl this check must be done before the check for libtiff as libtiff uses
+dnl libjpeg itself
JPEG_LINK=
if test "$wxUSE_LIBJPEG" != "no" ; then
AC_DEFINE(wxUSE_LIBJPEG)
wxUSE_LIBTIFF=sys
fi
fi
+ if test "$wxUSE_LIBTIFF" = "builtin" ; then
+ if test "$wxUSE_LIBJPEG" = "no"; then
+ dnl we have to prevent the builtin libtiff configure from building the
+ dnl library with JPEG support as this was explicitly disabled by user,
+ dnl but unfortunately it needs --disable-jpeg and not --without-libjpeg
+ dnl (which will be passed to it anyhow as configure passes arguments to
+ dnl the top-level script to all the other ones called recursively), so
+ dnl we need to hack around this
+ ac_configure_args="$ac_configure_args --disable-jpeg"
+ fi
+ AC_CONFIG_SUBDIRS([src/tiff])
+ fi
fi
dnl ------------------------------------------------------------------------
dnl --- FIXME: This is still a somewhat random list of libs,
dnl --- some of them should probably be included conditionally.
- LIBS="$LIBS -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -lctl3d32 -ladvapi32 -lwsock32 -lgdi32"
-
+ case "${host}" in
+ x86_64-*-mingw32* )
+ dnl --- For mingw-w64 lctl3d32's name has changed
+ LIBS="$LIBS -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -lwctl3d32 -ladvapi32 -lwsock32 -lgdi32"
+ ;;
+ * )
+ LIBS="$LIBS -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -lctl3d32 -ladvapi32 -lwsock32 -lgdi32"
+ ;;
+ esac
if test "$wxUSE_ACCESSIBILITY" = "yes" ; then
LIBS="$LIBS -loleacc"
fi
LIBS="$LIBS -lkernel32 -luser32"
esac
- dnl add extra odbc libs if we have compiled in odbc
- if test "$wxUSE_ODBC" = "sys" ; then
- wxUSE_ODBC = "yes"
- fi
- if test "$wxUSE_ODBC" = "yes" ; then
- LIBS=" -lodbc32 -lole32 -loleaut32 $LIBS"
- AC_DEFINE(wxUSE_ODBC)
- fi
- dnl We might want to abort here if wxUSE_ODBC="builtin" isn't supported on msw.
-
dnl This one is still used by some sample makefiles.
RESFLAGS="--include-dir \$(top_srcdir)/include --include-dir \$(top_srcdir)/\$(program_dir) --define __WIN32__ --define __WIN95__ --define __GNUWIN32__"
RESPROGRAMOBJ="\$(PROGRAM)_resources.o"
WXGTK12=
WXGTK127=
- WXGTK20=
+ WXGTK2=
WXGPE=
if test "$wxUSE_COCOA" = 1 ; then
fi
esac
- AM_PATH_GTK_2_0(2.0.0, wx_cv_lib_gtk=2.0, , $GTK_MODULES)
+ AM_PATH_GTK_2_0(2.4.0, wx_cv_lib_gtk=2.0, , $GTK_MODULES)
dnl Solaris also requires -lX11 for static lib
case "${host}" in
fi
case "$wx_cv_lib_gtk" in
- 2.0) WXGTK20=1
+ 2.0) WXGTK2=1
TOOLKIT_VERSION=2
;;
1.2.7) WXGTK127=1
;;
esac
- if test "$WXGTK20" = 1; then
+ if test "$WXGTK2" = 1; then
save_CFLAGS="$CFLAGS"
save_LIBS="$LIBS"
CFLAGS="$wx_cv_cflags_gtk $CFLAGS"
LIBS="$LIBS $wx_cv_libs_gtk"
- dnl gtk_icon_size_lookup is not available in the GTK+ headers
- dnl that have shipped with some versions of Sun's JDS. Not using
- dnl AC_CHECK_FUNCS here since it only checks the function exists
- dnl in the lib (not the header).
- AC_CHECK_DECLS([gtk_icon_size_lookup], [],
- [AC_DEFINE(NEED_GTK_ICON_SIZE_LOOKUP)],
- [#include <gtk/gtk.h>])
-
-
dnl test if we have at least GTK+ 2.10:
AC_MSG_CHECKING([if GTK+ is version >= 2.10])
AC_TRY_COMPILE([
[
AC_DEFINE(__WXGTK210__)
AC_DEFINE(__WXGTK26__)
- AC_DEFINE(__WXGTK24__)
AC_MSG_RESULT([yes])
ac_wxgtk210=1
],
],
[
AC_DEFINE(__WXGTK26__)
- AC_DEFINE(__WXGTK24__)
AC_MSG_RESULT([yes])
ac_wxgtk26=1
],
])
fi
- if test "$ac_wxgtk26" = 0; then
- dnl test if we have at least GTK+ 2.4:
- AC_MSG_CHECKING([if GTK+ is version >= 2.4])
- AC_TRY_COMPILE([
- #include <gtk/gtk.h>
- ],
- [
- #if !GTK_CHECK_VERSION(2,4,0)
- Not GTK+ 2.4
- #endif
- ],
- [
- AC_DEFINE(__WXGTK24__)
- AC_MSG_RESULT([yes])
- ],
- [
- AC_MSG_RESULT([no])
- ])
- fi
-
CFLAGS="$save_CFLAGS"
LIBS="$save_LIBS"
else
fi
if test "$wxUSE_MOTIF" = 1; then
- if test "$wxUSE_UNICODE" = "yes"; then
- AC_MSG_ERROR([Unicode configuration not supported with Motif])
- fi
-
AC_MSG_CHECKING(for Motif/Lesstif headers)
WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, Xm/Xm.h)
if test "$ac_find_includes" != "" ; then
libsm_ice_link=""
libs_found=0
for libp in "" " -lXp"; do
- if test "$libs_found" = "0"; then
+ if test "$libs_found" = 0; then
for libsm_ice in "" " -lSM -lICE"; do
- if test "$libs_found" = "0"; then
+ if test "$libs_found" = 0; then
save_LIBS="$LIBS"
LIBS="$GUI_TK_LIBRARY -lXm ${libp} -lXmu -lXext -lXt${libsm_ice} -lX11"
save_CFLAGS=$CFLAGS
fi
done
- if test "$libs_found" = "0"; then
+ if test "$libs_found" = 0; then
AC_MSG_RESULT([can't find the right libraries])
AC_MSG_ERROR([can't link a simple motif program])
fi
fi
fi
- if test "$wxUSE_MAC" = 1; then
+ if test "$wxUSE_OSX_CARBON" = 1; then
AC_MSG_CHECKING([for compiler syntax to enable Pascal strings])
if test "$GCC" = yes; then
AC_MSG_RESULT([gcc])
CPPFLAGS="$CPPFLAGS_PASCAL -I\${top_srcdir}/src/mac/carbon/morefilex -DTARGET_CARBON $CPPFLAGS"
fi
- TOOLKIT=MAC
+ TOOLKIT=OSX_CARBON
dnl we can't call this MAC_DIST or autoconf thinks its a macro
- GUIDIST=MACX_DIST
+ GUIDIST=OSX_CARBON_DIST
dnl wxMac version of wxBase and wxCocoa or wxBase-only built on Darwin
dnl are different, so they need different names:
WXBASEPORT="_carbon"
fi
+ if test "$wxUSE_OSX_COCOA" = 1; then
+ TOOLKIT=OSX_COCOA
+ GUIDIST=OSX_COCOA_DIST
+ fi
+
if test "$wxUSE_COCOA" = 1; then
TOOLKIT=COCOA
GUIDIST=COCOA_DIST
if test "$TOOLKIT" = "PM" ; then
TOOLKIT_DIR="os2"
else
- TOOLKIT_DIR=`echo ${TOOLKIT} | tr "[[A-Z]]" "[[a-z]]"`
+ TOOLKIT_DIR=`echo ${TOOLKIT} | tr '[[A-Z]]' '[[a-z]]'`
fi
if test "$wxUSE_UNIVERSAL" = "yes"; then
dnl If UTF-8 support wasn't explicitly enabled or disabled, enable it only
dnl for ports where it makes sense by default (GTK+, DirectFB):
if test "$wxUSE_UNICODE" = "yes" -a "$wxUSE_UNICODE_UTF8" = "auto" ; then
- if test "$TOOLKIT" = "DFB" ; then
- wxUSE_UNICODE_UTF8=yes
- elif test "$TOOLKIT" = "GTK" -a "$WXGTK20" = "1" ; then
+ if test "$USE_UNIX" = 1 -a "$wxUSE_DARWIN" != 1 ; then
wxUSE_UNICODE_UTF8=yes
- elif test "$USE_OS2" = "1" ; then
+ elif test "$USE_OS2" = 1 ; then
dnl wide char support is quite incomplete in libc;
dnl UTF-8 might actually work when evaluating/setting
dnl code pages correctly, even for ports other than GTK20.
fi
-dnl ----------------------------------------------------------------
-dnl iODBC support
-dnl ----------------------------------------------------------------
-
-IODBC_C_SRC=""
-
-
-dnl ODBC is handled separately for MSW
-if test "$TOOLKIT" != "MSW" ; then
-
- if test "$wxUSE_ODBC" = "sys" -o "$wxUSE_ODBC" = "yes" ; then
- dnl This is not ideal we really ough to use the unixodbc-config
- dnl or iodbc-config if they exist.
-
- AC_CHECK_HEADER([sql.h], [found_sql_h=1],, [ ])
- if test "x$found_sql_h" = "x1" ; then
- AC_CHECK_LIB(iodbc, SQLAllocEnv, ODBC_LINK=" -liodbc",
- [
- AC_CHECK_LIB(unixodbc, SQLAllocEnv, ODBC_LINK=" -lunixodbc",
- [
- AC_CHECK_LIB(odbc, SQLAllocEnv, ODBC_LINK=" -lodbc")
- ])
- ])
- fi
- if test "x$ODBC_LINK" = "x" ; then
- if test "$wxUSE_ODBC" = "sys" ; then
- AC_MSG_ERROR([system ODBC library not found! Use --with-odbc=builtin to use built-in version])
- else
- AC_MSG_WARN([system ODBC library not found, will use built-in instead])
- wxUSE_ODBC=builtin
- fi
- else
- dnl we are using the system library
- wxUSE_ODBC=sys
- fi
- fi
-
- if test "$wxUSE_ODBC" = "builtin" ; then
- AC_DEFINE(wxUSE_BUILTIN_IODBC)
- fi
-fi
-
-if test "$wxUSE_ODBC" != "no" ; then
- AC_DEFINE(wxUSE_ODBC)
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS db"
-
- dnl is this still necessary?
- WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -D_IODBC_"
-fi
-
dnl ---------------------------------------------------------------------------
dnl wxDisplay Sanity checks
dnl ---------------------------------------------------------------------------
USE_OPENGL=0
if test "$wxUSE_OPENGL" = "yes"; then
- if test "$wxUSE_MGL" = 1 -o "$wxUSE_DFB" = "1"; then
+ if test "$wxUSE_MGL" = 1 -o "$wxUSE_DFB" = 1; then
AC_MSG_WARN([wxGLCanvas not implemented for this port, library will be compiled without it.])
wxUSE_OPENGL="no"
- elif test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = "1"; then
+ elif test "$wxUSE_OSX_CARBON" = 1 -o test "$wxUSE_OSX_COCOA" = 1 -o "$wxUSE_COCOA" = 1; then
OPENGL_LIBS="-framework OpenGL -framework AGL"
elif test "$wxUSE_MSW" = 1; then
OPENGL_LIBS="-lopengl32 -lglu32"
AC_MSG_RESULT([no])
fi
fi
- ])
+ ],, [ ])
],
[],
[ ])
;;
*-*-cygwin* | *-*-mingw32* )
- dnl this one shouldn't be used for the library build so put it in a
- dnl separate variable from WXCONFIG_CPPFLAGS
- WXCONFIG_ONLY_CPPFLAGS="$WXCONFIG_ONLY_CPPFLAGS -DWXUSINGDLL"
;;
*-*-hpux* )
esac
fi
+ dnl this one shouldn't be used for the library build so put it in a
+ dnl separate variable from WXCONFIG_CPPFLAGS
+ WXCONFIG_ONLY_CPPFLAGS="$WXCONFIG_ONLY_CPPFLAGS -DWXUSINGDLL"
+
if test $wxUSE_RPATH = "no"; then
SAMPLES_RPATH_FLAG=''
SAMPLES_RPATH_POSTLINK=''
DEBUG_INFO=1
fi
-WX_VERSION_TAG=`echo WX${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}_${WX_RELEASE} | tr "[[a-z]]" "[[A-Z]]"`
+WX_VERSION_TAG=`echo WX${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}_${WX_RELEASE} | tr '[[a-z]]' '[[A-Z]]'`
TOOLCHAIN_NAME="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}"
AC_LANG_RESTORE
fi
-if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1; then
- dnl base name of the resource file for wxMac must be the same
- dnl as library installation base name (-install_name)
- WX_RESOURCES_MACOSX_ASCII="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.r"
- WX_RESOURCES_MACOSX_DATA="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.rsrc"
-
- dnl add the resources target for wxMac
- LIBWXMACRES="\$(wx_top_builddir)/lib/${WX_RESOURCES_MACOSX_ASCII}"
-
- AC_CHECK_PROG(REZ, Rez, Rez, /Developer/Tools/Rez)
- AC_CHECK_PROG(DEREZ, DeRez, DeRez, /Developer/Tools/DeRez)
- AC_CHECK_PROG(SETFILE, SetFile, SetFile, /Developer/Tools/SetFile)
-
- MACSETFILE="\$(SETFILE)"
-
- dnl resources are bundled both with shared library and applications
- dnl since the carb resource *must* be included in the application
- if test "$wxUSE_MAC" = 1; then
- POSTLINK_COMMAND="\$(REZ) -d __DARWIN__ -t APPL Carbon.r -o"
- RESCOMP="$REZ"
- WXCONFIG_RESFLAGS="-d __DARWIN__ -t APPL Carbon.r -o"
- else
- POSTLINK_COMMAND="echo -n | \$(REZ) -d __DARWIN__ -t APPL ${LIBWXMACRES}"
- RESCOMP="echo -n \| $REZ"
- WXCONFIG_RESFLAGS="-d __DARWIN__ -t APPL \$libdir/$WX_RESOURCES_MACOSX_ASCII"
- fi
-
-else
- dnl default value is to (silently) do nothing in the makefile
- MACSETFILE="@true"
-
- if test "$wxUSE_PM" = 1; then
- RESCOMP="emxbind"
- WXCONFIG_RESFLAGS="-ep"
-
- dnl Is this one really used anywhere for pm?
- POSTLINK_COMMAND="$RESCOMP $WXCONFIG_RESFLAGS"
- else
- POSTLINK_COMMAND="@true"
- fi
-
-fi
-
-
dnl ---------------------------------------------------------------------------
dnl Checks for typedefs
dnl ---------------------------------------------------------------------------
AC_TYPE_PID_T
dnl defines size_t if not already defined
AC_TYPE_SIZE_T
-dnl defines uid_t and gid_t if not already defined
-AC_TYPE_UID_T
dnl sets HAVE_SSIZE_T if ssize_t is defined
AC_CHECK_TYPES(ssize_t)
dnl so we first check if the function is in the library
dnl
dnl FIXME: replace this mess with WX_CHECK_FUNCS()
-AC_CHECK_FUNCS(snprintf vsnprintf)
+AC_CHECK_FUNCS(snprintf vsnprintf vsscanf)
+AC_LANG_PUSH(C++)
if test "$ac_cv_func_vsnprintf" = "yes"; then
dnl yes it is -- now check if it is in the headers
AC_CACHE_CHECK([for vsnprintf declaration], wx_cv_func_vsnprintf_decl,
char *buf;
snprintf(buf, 10u, "%s", "wx");
],
- wx_cv_func_snprintf_decl=yes,
- wx_cv_func_snprintf_decl=no
- )
- ]
- )
-
- if test "$wx_cv_func_snprintf_decl" = "yes"; then
- AC_DEFINE(HAVE_SNPRINTF_DECL)
-
- dnl we know there is an snprintf declaration, but some old headers
- dnl may have one taking a "char *" format instead of "const char *"
- AC_CACHE_CHECK([if snprintf declaration is broken], wx_cv_func_broken_snprintf_decl,
- [
- AC_TRY_COMPILE(
- [
- #include <stdio.h>
- #include <stdarg.h>
- #ifdef __MSL__
- #if __MSL__ >= 0x6000
- namespace std {}
- using namespace std;
- #endif
- #endif
- ],
- [
- char *buf;
- const char *fmt = "%s";
- snprintf(buf, 10u, fmt, "wx");
- ],
- wx_cv_func_broken_snprintf_decl=no,
- wx_cv_func_broken_snprintf_decl=yes
- )
- ]
- )
+ wx_cv_func_snprintf_decl=yes,
+ wx_cv_func_snprintf_decl=no
+ )
+ ]
+ )
- if test "$wx_cv_func_broken_snprintf_decl" = "yes"; then
- AC_DEFINE(HAVE_BROKEN_SNPRINTF_DECL)
- fi
+ if test "$wx_cv_func_snprintf_decl" = "yes"; then
+ AC_DEFINE(HAVE_SNPRINTF_DECL)
fi
if test "$wxUSE_PRINTF_POS_PARAMS" = "yes"; then
fi
fi
-if test "$wxUSE_UNICODE" = yes; then
-
- dnl our wxVsnprintf() implementation needs to use the system swprintf() in Unicode
- dnl builds so let's check if swprintf() is declared as C99 imposes:
- dnl int swprintf(wchar_t *s, size_t n, const wchar_t *format, ...);
- dnl or rather as:
- dnl int swprintf(wchar_t *s, const wchar_t *format, ...);
- AC_CHECK_FUNCS(swprintf)
-
- if test "$ac_cv_func_swprintf" = "yes"; then
- AC_CACHE_CHECK([if swprintf declaration is broken], wx_cv_func_broken_swprintf_decl,
- [
- AC_TRY_COMPILE(
- [
- #include <stdio.h>
- #include <stdarg.h>
- #include <wchar.h>
- ],
- [
- wchar_t *buf;
- const wchar_t *fmt = L"test";
- swprintf(buf, 10u, fmt);
- ],
- wx_cv_func_broken_swprintf_decl=no,
- wx_cv_func_broken_swprintf_decl=yes
- )
- ]
- )
+dnl the same as above but for vsscanf() now: it's not present in at least
+dnl Solaris 9 headers for gcc-3.4 (due to fixinclude's processing of stdio.h)
+if test "$ac_cv_func_vsscanf" = "yes"; then
+ AC_CACHE_CHECK([for vsscanf declaration], wx_cv_func_vsscanf_decl,
+ [
+ AC_TRY_COMPILE(
+ [
+ #include <stdio.h>
+ #include <stdarg.h>
+ #ifdef __MSL__
+ #if __MSL__ >= 0x6000
+ namespace std {}
+ using namespace std;
+ #endif
+ #endif
+ ],
+ [
+ char *buf;
+ va_list args;
+ vsscanf(buf, "%s", args);
+ ],
+ wx_cv_func_vsscanf_decl=yes,
+ wx_cv_func_vsscanf_decl=no
+ )
+ ]
+ )
- if test "$wx_cv_func_broken_swprintf_decl" = "yes"; then
- AC_DEFINE(HAVE_BROKEN_SWPRINTF_DECL)
- fi
+ if test "$wx_cv_func_vsscanf_decl" = "yes"; then
+ AC_DEFINE(HAVE_VSSCANF_DECL)
fi
+fi
+AC_LANG_POP()
+
+if test "$wxUSE_UNICODE" = yes; then
dnl also look if we have wide char IO functions, notice that [f]putws are
dnl declared in special widec.h under Solaris
fi
esac
- WX_CHECK_FUNCS(wputc wputchar putws fputws wprintf vswprintf,,,
+ WX_CHECK_FUNCS(putws fputws wprintf vswprintf vswscanf,,,
[$wchar_headers])
dnl MinGW has a vswprintf with a different prototype, and
[AC_MSG_RESULT([no])]);
fi
-if test "x$ac_cv_header_fnmatch_h" = "xyes"; then
- WX_CHECK_FUNCS(fnmatch,,,[#include <fnmatch.h>])
-fi
-
if test "$wxUSE_FILE" = "yes"; then
WX_CHECK_FUNCS(fsync)
fi
if test "$TOOLKIT" != "MSW"; then
dnl check for available version of iconv()
-
-AM_ICONV
-LIBS="$LIBICONV $LIBS"
+if test "$wxUSE_LIBICONV" != "no" ; then
+ AM_ICONV
+ LIBS="$LIBICONV $LIBS"
+fi
dnl check for POSIX signals if we need them
if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes" -a "$wxUSE_UNIX" = "yes"; then
fi
fi
-if test "$wxUSE_STACKWALKER" = "yes" -a "$USE_WIN32" != "1" -a "$USE_UNIX" != "1"; then
+if test "$wxUSE_STACKWALKER" = "yes" -a "$USE_WIN32" != 1 -a "$USE_UNIX" != 1; then
AC_MSG_WARN([wxStackWalker is only available on Win32 and UNIX... disabled])
wxUSE_STACKWALKER=no
fi
fi
fi
-dnl check for timegm() used by datetime.cpp
-AC_CHECK_FUNCS(timegm)
-
dnl look for a function to modify the environment
AC_CHECK_FUNCS(setenv putenv, break)
+if test "$ac_cv_func_setenv" = "yes"; then
+ AC_CHECK_FUNCS(unsetenv)
+fi
HAVE_SOME_SLEEP_FUNC=0
if test "$USE_BEOS" = 1; then
WX_CHECK_FUNCS(fdopen)
+if test "$wxUSE_TARSTREAM" = "yes"; then
+ WX_CHECK_FUNCS(sysconf)
+
+ WX_CHECK_FUNCS(getpwuid_r, [], [],
+ [
+ #define _REENTRANT
+ #include <pwd.h>
+ ],
+ [[
+ struct passwd pw, *ppw;
+ char buf[1024];
+ getpwuid_r(0, &pw, buf, sizeof(buf), &ppw)
+ ]])
+
+ WX_CHECK_FUNCS(getgrgid_r, [], [],
+ [
+ #define _REENTRANT
+ #include <grp.h>
+ ],
+ [[
+ struct group grp, *pgrp;
+ char buf[1024];
+ getgrgid_r(0, &grp, buf, sizeof(buf), &pgrp)
+ ]])
+fi
+
fi
AC_MSG_WARN([wxMutex won't be recursive on this platform])
fi
fi
+
+ dnl test for compiler thread-specific variables support
+ AC_CACHE_CHECK([for __thread keyword],
+ wx_cv_cc___thread,
+ [
+ AC_TRY_COMPILE([#include <pthread.h>],
+ [
+ static __thread int n = 0;
+ static __thread int *p = 0;
+ ],
+ wx_cv_cc___thread=yes,
+ wx_cv_cc___thread=no
+ )
+ ])
+
+ if test "$wx_cv_cc___thread" = "yes"; then
+ AC_DEFINE(HAVE___THREAD_KEYWORD)
+ fi
fi
dnl from if !MSW
else
if test "$wxUSE_THREADS" = "yes" ; then
case "${host}" in
+ x86_64-*-mingw32* )
+ ;;
*-*-mingw32* )
dnl check if the compiler accepts -mthreads
AC_CACHE_CHECK([if compiler supports -mthreads],
AC_CHECK_FUNC(localtime_r, [ AC_DEFINE(HAVE_LOCALTIME_R) ])
AC_CHECK_FUNC(gmtime_r, [ AC_DEFINE(HAVE_GMTIME_R) ])
-AC_CHECK_FUNC(readdir_r, [ AC_DEFINE(HAVE_READDIR_R) ])
dnl By preference, we probably should use getaddrinfo which avoids thread
dnl safety issues and supports IPv6, however there currently is no code
dnl for it, so testing for it is temporarily disabled and we are restricted
fi
fi
-if test "$WXGTK20" = 1 ; then
- AC_DEFINE_UNQUOTED(__WXGTK20__,$WXGTK20)
+if test "$WXGTK2" = 1 ; then
+ AC_DEFINE_UNQUOTED(__WXGTK20__,$WXGTK2)
WXGTK12=1
fi
DEBUG_CFLAGS=
if test "$wxUSE_DEBUG_INFO" = "yes" ; then
DEBUG_CFLAGS="-g"
- wxUSE_OPTIMISE=no
fi
if test "$wxUSE_DEBUG_GDB" = "yes" ; then
HAVE_DL_FUNCS=0
HAVE_SHL_FUNCS=0
if test "$wxUSE_DYNAMIC_LOADER" = "yes" -o "$wxUSE_DYNLIB_CLASS" = "yes" ; then
- if test "$USE_DARWIN" = 1; then
- dnl dlopen/dlerror is implemented in dynlib.cpp for Darwin/Mac OS X
- HAVE_DL_FUNCS=1
- elif test "$USE_DOS" = 1; then
+ if test "$USE_DOS" = 1; then
HAVE_DL_FUNCS=0
else
dnl the test is a bit complicated because we check for dlopen() both with
])
])
- dnl check also for dlerror()
- if test "$HAVE_DL_FUNCS" = 1; then
- AC_CHECK_FUNCS(dlerror,
- AC_DEFINE(HAVE_DLERROR),
- [
- AC_CHECK_LIB(dl, dlerror, AC_DEFINE(HAVE_DLERROR))
- ]
- )
+ dnl check also for dlerror()
+ if test "$HAVE_DL_FUNCS" = 1; then
+ AC_CHECK_FUNCS(dlerror,
+ AC_DEFINE(HAVE_DLERROR),
+ [
+ AC_CHECK_LIB(dl, dlerror, AC_DEFINE(HAVE_DLERROR))
+ ]
+ )
+ fi
fi
+
+ dnl Force HAVE_DL_FUNCS on for Darwin, even if the tests failed (e.g. pre-10.3)
+ if test "$USE_DARWIN" = 1; then
+ dnl dlopen/dlerror is implemented in dynlib.cpp for Darwin/Mac OS X
+ HAVE_DL_FUNCS=1
fi
if test "$HAVE_DL_FUNCS" = 0; then
dnl Unix implementation needs additional checks because audio support
dnl comes in many favours:
-if test "$USE_UNIX" = "1" ; then
+if test "$USE_UNIX" = 1 ; then
dnl mmedia doesn't compile with wxMGL, remove this if this is ever fixed
if test "$wxUSE_MGL" != 1; then
dnl it's not enough to check for just the header because OSS under NetBSD
WITH_PLUGIN_SDL=0
if test "$wxUSE_SOUND" = "yes"; then
- if test "$USE_UNIX" = "1" ; then
+ if test "$USE_UNIX" = 1 ; then
if test "$wxUSE_LIBSDL" != "no"; then
AM_PATH_SDL([1.2.0],
[
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sound"
fi
-if test "$WXGTK20" = 1; then
+if test "$WXGTK2" = 1; then
PKG_PROG_PKG_CONFIG()
if test "$wxUSE_PRINTING_ARCHITECTURE" = "yes" ; then
+
+ if test "$wxUSE_GTKPRINT" = "yes" ; then
+
+ PKG_CHECK_MODULES(GTKPRINT,
+ [gtk+-unix-print-2.0 >= 2.10],
+ [
+ CFLAGS="$GTKPRINT_CFLAGS $CFLAGS"
+ CXXFLAGS="$GTKPRINT_CFLAGS $CXXFLAGS"
+ AC_DEFINE(wxUSE_GTKPRINT)
+ ],
+ [
+ AC_MSG_WARN([GTK printing support not found (GTK+ >= 2.10), library will use GNOME printing support or standard PostScript printing])
+ wxUSE_GTKPRINT="no"
+ ]
+ )
+ fi
+
if test "$wxUSE_LIBGNOMEPRINT" = "yes" ; then
PKG_CHECK_MODULES(LIBGNOMEPRINTUI,
fi
if test "$wxUSE_DEBUGREPORT" = "yes"; then
- if test "$USE_UNIX" != "1" -a "$USE_WIN32" != "1"; then
+ if test "$USE_UNIX" != 1 -a "$USE_WIN32" != 1; then
AC_MSG_WARN([Creating debug reports not currently supported on this system, disabled])
wxUSE_DEBUGREPORT=no
else
fi
fi
+if test "$wxUSE_XLOCALE" == "yes" ; then
+ AC_DEFINE(wxUSE_XLOCALE)
+ AC_CHECK_TYPES(locale_t,,,
+ [#include <xlocale.h>
+ #include <locale.h>])
+fi
+
if test "$wxUSE_LOG" = "yes"; then
AC_DEFINE(wxUSE_LOG)
fi
if test "$wxUSE_EPOLL_DISPATCHER" = "yes"; then
- AC_CHECK_HEADERS(sys/epoll.h)
+ AC_CHECK_HEADERS(sys/epoll.h,,, [AC_INCLUDES_DEFAULT()])
if test "$ac_cv_header_sys_epoll_h" = "yes"; then
AC_DEFINE(wxUSE_EPOLL_DISPATCHER)
else
dnl VZ: the GUI hooks wxSocket needs are not implemented yet in some toolkits
if test "$wxUSE_SOCKETS" = "yes"; then
- if test "$wxUSE_MGL" = "1"; then
+ if test "$wxUSE_MGL" = 1; then
AC_MSG_WARN([wxSocket not yet supported under MGL... disabled])
wxUSE_SOCKETS="no"
fi
fi
if test "$wxUSE_SOCKETS" = "yes" ; then
+ if test "$wxUSE_IPV6" = "yes"; then
+ AC_CACHE_CHECK(
+ [whether we have sockaddr_in6],
+ [wx_cv_type_sockaddr_in6],
+ [
+ AC_TRY_COMPILE(
+ [
+ #include <sys/types.h>
+ #include <sys/socket.h>
+ #include <netinet/in.h>
+ ],
+ [
+ struct sockaddr_in6 sa6;
+ ],
+ wx_cv_type_sockaddr_in6=yes,
+ wx_cv_type_sockaddr_in6=no
+ )
+ ]
+ )
+
+ if test "$wx_cv_type_sockaddr_in6"="yes"; then
+ AC_DEFINE(wxUSE_IPV6)
+ else
+ AC_MSG_WARN([IPv6 support not available... disabled])
+ fi
+ fi
+
AC_DEFINE(wxUSE_SOCKETS)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sockets"
fi
wxUSE_JOYSTICK=yes
dnl mac only available on darwin
- elif test "$TOOLKIT" = "MAC" -o "$TOOLKIT" = "COCOA"; then
+ elif test "$TOOLKIT" = "OSX" -o "$TOOLKIT" = "COCOA"; then
if test "$USE_DARWIN" = 1; then
dnl check for a bug in the headers, some have bad setEventCallout
AC_MSG_CHECKING([headers have declarations needed for joystick support])
dnl joystick support is only for Linux 2.1.x or greater
else
dnl wxJoystick not supported by wxMGL at all
- if test "$wxUSE_MGL" != "1"; then
+ if test "$wxUSE_MGL" != 1; then
dnl notice the dummy includes argument: without it, AC_CHECK_HEADER
dnl checks only whether the header can be preprocessed, not that it
dnl can be compiled and in Linux 2.6.16 joystick.h is present but
fi
fi
-if test "$wxUSE_wxUSE_EXPERIMENTAL_PRINTF" = "yes"; then
- AC_DEFINE(wxUSE_EXPERIMENTAL_PRINTF)
-fi
-
dnl ---------------------------------------------------------------------------
dnl big GUI components: MDI, doc/view, printing, help, ...
dnl ---------------------------------------------------------------------------
AC_DEFINE(wxUSE_AFM_FOR_POSTSCRIPT)
-AC_DEFINE(wxUSE_NORMALIZED_PS_FONTS)
-
if test "$wxUSE_SVG" = "yes"; then
AC_DEFINE(wxUSE_SVG)
fi
if test "$wxUSE_CHECKLST" = "yes"; then
AC_DEFINE(wxUSE_CHECKLISTBOX)
USES_CONTROLS=1
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS checklst"
fi
if test "$wxUSE_COLOURPICKERCTRL" = "yes"; then
USES_CONTROLS=1
fi
+if test "$wxUSE_FILECTRL" = "yes"; then
+ AC_DEFINE(wxUSE_FILECTRL)
+ USES_CONTROLS=1
+fi
+
if test "$wxUSE_FILEPICKERCTRL" = "yes"; then
AC_DEFINE(wxUSE_FILEPICKERCTRL)
USES_CONTROLS=1
wxUSE_DISPLAY=no
else
AC_DEFINE(wxUSE_DISPLAY)
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS display multimon"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS display"
fi
fi
if test "$wxUSE_LISTBOX" = "yes"; then
AC_DEFINE(wxUSE_LISTBOX)
USES_CONTROLS=1
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS listbox"
fi
if test "$wxUSE_LISTCTRL" = "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS notebook"
fi
+if test "$wxUSE_NOTIFICATION_MESSAGE" = "yes"; then
+ AC_DEFINE(wxUSE_NOTIFICATION_MESSAGE)
+fi
+
if test "$wxUSE_ODCOMBOBOX" = "yes"; then
AC_DEFINE(wxUSE_ODCOMBOBOX)
USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS combo"
fi
-dnl if test "$wxUSE_PROPSHEET" = "yes"; then
-dnl AC_DEFINE(wxUSE_PROPSHEET)
-dnl USES_CONTROLS=1
-dnl SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS proplist"
-dnl fi
-
if test "$wxUSE_RADIOBOX" = "yes"; then
AC_DEFINE(wxUSE_RADIOBOX)
USES_CONTROLS=1
AC_DEFINE(wxUSE_TEXTCTRL)
USES_CONTROLS=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS text"
+
+ dnl we don't have special switches to disable wxUSE_RICHEDIT[2], it doesn't
+ dnl seem useful to allow disabling them
+ AC_DEFINE(wxUSE_RICHEDIT)
+ AC_DEFINE(wxUSE_RICHEDIT2)
fi
if test "$wxUSE_TOGGLEBTN" = "yes"; then
fi
if test "$wxUSE_POPUPWIN" = "yes"; then
- if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1 ; then
+ if test "$wxUSE_COCOA" = 1 ; then
AC_MSG_WARN([Popup window not yet supported under Mac OS X... disabled])
else
if test "$wxUSE_PM" = 1; then
AC_DEFINE(wxUSE_HTML)
USE_HTML=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS html html/about html/help html/helpview html/printing html/test html/virtual html/widget html/zip htlbox"
- if test "$wxUSE_MAC" = 1; then
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS html/htmlctrl"
- fi
fi
if test "$wxUSE_WEBKIT" = "yes"; then
if test "$wxUSE_MAC" = 1 -a "$USE_DARWIN" = 1; then
else
wxUSE_WEBKIT=no
fi
+ if test "$wxUSE_WEBKIT" = "yes"; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS html/htmlctrl"
+ fi
fi
USE_XRC=0
if test "$wxUSE_MINIFRAME" = "yes"; then
AC_DEFINE(wxUSE_MINIFRAME)
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS minifram"
fi
if test "$wxUSE_SYSTEM_OPTIONS" = "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS wizard"
fi
+dnl ---------------------------------------------------------------------------
+dnl options used under wxMSW and wxPM
+dnl ---------------------------------------------------------------------------
+
+if test "$wxUSE_MSW" = 1 -o "$wxUSE_PM" = 1; then
+ if test "$wxUSE_OWNER_DRAWN" = "yes"; then
+ AC_DEFINE(wxUSE_OWNER_DRAWN)
+ fi
+fi
+
dnl ---------------------------------------------------------------------------
dnl wxMSW-only options
dnl ---------------------------------------------------------------------------
if test "$wxUSE_MSW" = 1 ; then
-if test "$wxUSE_DC_CACHEING" = "yes"; then
- AC_DEFINE(wxUSE_DC_CACHEING)
+ if test "$wxUSE_DC_CACHEING" = "yes"; then
+ AC_DEFINE(wxUSE_DC_CACHEING)
+ fi
+
+ if test "$wxUSE_DIB" = "yes"; then
+ AC_DEFINE(wxUSE_WXDIB)
+ fi
+
+ if test "$wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW" = "yes"; then
+ AC_DEFINE(wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW)
+ fi
+
+ if test "$wxUSE_UXTHEME" = "yes"; then
+ AC_DEFINE(wxUSE_UXTHEME)
+ fi
+
fi
+dnl wxUSE_MSW = 1
-if test "$wxUSE_UXTHEME" = "yes"; then
- AC_DEFINE(wxUSE_UXTHEME)
+dnl not quite MSW-only although mostly useful to disable this under MSW
+if test "$wxUSE_AUTOID_MANAGEMENT" = "yes"; then
+ AC_DEFINE(wxUSE_AUTOID_MANAGEMENT)
fi
+if test "$USE_WIN32" = 1 ; then
+ if test "$wxUSE_INICONF" = "yes"; then
+ AC_DEFINE(wxUSE_INICONF)
+ fi
+
+ if test "$wxUSE_REGKEY" = "yes"; then
+ AC_DEFINE(wxUSE_REGKEY)
+ fi
fi
-dnl wxUSE_MSW = 1
+dnl USE_WIN32 = 1
dnl ---------------------------------------------------------------------------
dnl wxGraphicsContext
dnl ---------------------------------------------------------------------------
+if test "$wxUSE_MAC" = 1; then
+ wxUSE_GRAPHICS_CONTEXT="yes"
+fi
+
if test "$wxUSE_GRAPHICS_CONTEXT" = "yes"; then
- if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = "1"; then
+ if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1; then
AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)
elif test "$wxUSE_GTK" != 1; then
dnl for other builds we'll just wing it for now...
if test "$wxUSE_GSTREAMER" = "yes"; then
CPPFLAGS="$GST_CFLAGS $CPPFLAGS"
- LIBS="$GST_LIBS $LIBS"
+ EXTRALIBS_MEDIA="$GST_LIBS"
AC_DEFINE(wxUSE_GSTREAMER)
else
STD_BASE_LIBS="base"
STD_GUI_LIBS=""
BUILT_WX_LIBS="base"
-ALL_WX_LIBS="xrc stc gl media dbgrid qa html adv core odbc xml net base"
+ALL_WX_LIBS="xrc stc gl media qa html adv core xml net base"
if test "$wxUSE_SOCKETS" = "yes" ; then
STD_BASE_LIBS="net $STD_BASE_LIBS"
BUILT_WX_LIBS="net $BUILT_WX_LIBS"
fi
-if test "$wxUSE_ODBC" != "no" ; then
- BUILT_WX_LIBS="odbc $BUILT_WX_LIBS"
-fi
if test "$wxUSE_XML" = "yes" ; then
STD_BASE_LIBS="xml $STD_BASE_LIBS"
BUILT_WX_LIBS="xml $BUILT_WX_LIBS"
STD_GUI_LIBS="qa $STD_GUI_LIBS"
BUILT_WX_LIBS="qa $BUILT_WX_LIBS"
fi
- if test "$wxUSE_ODBC" != "no" ; then
- BUILT_WX_LIBS="dbgrid $BUILT_WX_LIBS"
- fi
if test "$wxUSE_HTML" = "yes" ; then
STD_GUI_LIBS="html $STD_GUI_LIBS"
BUILT_WX_LIBS="html $BUILT_WX_LIBS"
if test "$wxUSE_SOUND" = "yes" || test "$wxUSE_MEDIACTRL" = "yes"; then
if test "$USE_DARWIN" = 1; then
LDFLAGS="$LDFLAGS -framework QuickTime"
- else
- LDFLAGS="$LDFLAGS -lQuickTimeLib"
fi
fi
if test "$USE_DARWIN" = 1; then
- LDFLAGS="$LDFLAGS -framework IOKit -framework Carbon -framework Cocoa -framework System"
- else
- LDFLAGS="$LDFLAGS -lCarbonLib"
+ LDFLAGS="$LDFLAGS -framework IOKit -framework Carbon -framework Cocoa -framework AudioToolbox -framework System"
fi
fi
if test "$wxUSE_COCOA" = 1 ; then
dnl TODO some samples are never built so far: mfc (requires VC++)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS artprov controls dialogs drawing \
- dynamic erase event exec font image minimal mobile \
- mobile/wxedit mobile/styles propsize render \
- rotate shaped svg taborder vscroll widgets"
+ erase event exec font image minimal mobile \
+ mobile/wxedit mobile/styles render \
+ shaped svg taborder vscroll widgets"
if test "$wxUSE_MONOLITHIC" != "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS console"
fi
else
SAMPLES_SUBDIRS="console"
+ if test "$wxUSE_SOCKETS" = "yes" ; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sockets"
+ fi
+ if test "$wxUSE_IPC" = "yes" ; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS ipc"
+ fi
fi
CXXWARNINGS="-Wall -wd279,383,444,810,869,981,1418,1419"
elif test "$GXX" = yes ; then
dnl CXXWARNINGS="-Wall -W -Wcast-qual -Werror"
- CXXWARNINGS="-Wall -Wundef -Wno-ctor-dtor-privacy"
+ CXXWARNINGS="-Wall -Wundef -Wunused-parameter -Wno-ctor-dtor-privacy"
fi
C_AND_CXX_FLAGS="$DEBUG_CFLAGS $PROFILE_FLAGS $OPTIMISE_CFLAGS"
CFLAGS=`echo $WXCONFIG_CFLAGS $CWARNINGS $C_AND_CXX_FLAGS $CFLAGS `
CXXFLAGS=`echo $WXCONFIG_CXXFLAGS $C_AND_CXX_FLAGS $CXXFLAGS `
+OBJCFLAGS=`echo $WXCONFIG_CFLAGS $CWARNINGS $C_AND_CXX_FLAGS $OBJCFLAGS `
+OBJCXXFLAGS=`echo $WXCONFIG_CXXFLAGS $C_AND_CXX_FLAGS $OBJCXXFLAGS `
dnl now that we added WXCONFIG_CPPFLAGS to CPPFLAGS we can add the wx-config
dnl only stuff to it
EXTRALIBS="$LDFLAGS $LDFLAGS_VERSIONING $LIBS $DMALLOC_LIBS"
EXTRALIBS_XML="$EXPAT_LINK"
EXTRALIBS_HTML="$MSPACK_LINK"
-EXTRALIBS_ODBC="$ODBC_LINK"
+EXTRALIBS_MEDIA="$GST_LIBS"
EXTRALIBS_STC="-lwxscintilla${lib_debug_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX}"
if test "$wxUSE_GUI" = "yes"; then
EXTRALIBS_GUI=`echo $GUI_TK_LIBRARY $PNG_LINK $JPEG_LINK $TIFF_LINK $WEBKIT_LINK $EXTRALIBS_HILDON $EXTRALIBS_GNOMEVFS $EXTRALIBS_GNOMEPRINT`
if test "$wxUSE_EXPAT" = "builtin" ; then
wxconfig_3rdparty="expat $wxconfig_3rdparty"
fi
-if test "$wxUSE_ODBC" = "builtin" ; then
- wxconfig_3rdparty="odbc $wxconfig_3rdparty"
-fi
if test "$wxUSE_LIBTIFF" = "builtin" ; then
wxconfig_3rdparty="tiff $wxconfig_3rdparty"
fi
;;
*)
- for t in `echo $wxUNIV_THEMES | tr , ' ' | tr a-z A-Z`; do
+ for t in `echo $wxUNIV_THEMES | tr , ' ' | tr '[[a-z]]' '[[A-Z]]'`; do
AC_DEFINE_UNQUOTED(wxUSE_THEME_$t)
done
esac
AC_SUBST(wxUSE_ZLIB)
AC_SUBST(wxUSE_REGEX)
AC_SUBST(wxUSE_EXPAT)
-AC_SUBST(wxUSE_ODBC)
AC_SUBST(wxUSE_LIBJPEG)
AC_SUBST(wxUSE_LIBPNG)
AC_SUBST(wxUSE_LIBTIFF)
USE_PLUGINS=0
fi
-if test $wxUSE_ODBC != "no" ; then
- USE_ODBC=1
-else
- USE_ODBC=0
-fi
-
if test "$wxUSE_DEBUGREPORT" = "yes" ; then
USE_QA=1
else
AC_SUBST(EXTRALIBS)
AC_SUBST(EXTRALIBS_XML)
AC_SUBST(EXTRALIBS_HTML)
-AC_SUBST(EXTRALIBS_ODBC)
+AC_SUBST(EXTRALIBS_MEDIA)
AC_SUBST(EXTRALIBS_GUI)
AC_SUBST(EXTRALIBS_OPENGL)
AC_SUBST(EXTRALIBS_SDL)
+AC_SUBST(EXTRALIBS_STC)
AC_SUBST(WITH_PLUGIN_SDL)
+AC_SUBST(EXTRALIBS_GTKPRINT)
AC_SUBST(EXTRALIBS_GNOMEPRINT)
AC_SUBST(EXTRALIBS_GNOMEVFS)
AC_SUBST(EXTRALIBS_HILDON)
AC_SUBST(BUILD)
AC_SUBST(DEBUG_INFO)
AC_SUBST(DEBUG_FLAG)
-TOOLKIT_LOWERCASE=`echo $TOOLKIT | tr "[[A-Z]]" "[[a-z]]"`
+if test "$TOOLKIT" = "MAC"; then
+ TOOLKIT_LOWERCASE=osx
+else
+ TOOLKIT_LOWERCASE=`echo $TOOLKIT | tr '[[A-Z]]' '[[a-z]]'`
+fi
AC_SUBST(TOOLKIT_LOWERCASE)
AC_SUBST(TOOLKIT_VERSION)
AC_SUBST(SAMPLES_RPATH_FLAG)
case "$TOOLKIT" in
GTK)
TOOLKIT_DESC="GTK+"
- if test "$WXGTK20" = 1; then
+ if test "$WXGTK2" = 1; then
TOOLKIT_DESC="$TOOLKIT_DESC 2"
+ if test "$wxUSE_GTKPRINT" = "yes" ; then
+ TOOLKIT_EXTRA="$TOOLKIT_EXTRA GTK+ printing";
+ fi
if test "$wxUSE_LIBGNOMEPRINT" = "yes" ; then
TOOLKIT_EXTRA="$TOOLKIT_EXTRA gnomeprint";
fi
BAKEFILE_FORCE_PLATFORM=win32
fi
-dnl ---------------------------------------------------------------------------
-dnl Add Universal binary support
-dnl Note we don't do this earlier because adding these cpp/ld flags could
-dnl cause configure tests to fail.
-dnl ---------------------------------------------------------------------------
-if test "$wxUSE_MAC" = 1 ; then
- if test "x$wxUSE_UNIVERSAL_BINARY" != xno ; then
- dnl --enable-universal_binary uses a default SDK (currently 10.4u)
- dnl --enable-universal_binary=SDK names a path to an SDK
- if test "x$wxUSE_UNIVERSAL_BINARY" == xyes; then
- OSX_UNIV_OPTS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
- else
- dnl '' would mean universal with no SDK, which may be the case if
- dnl the compiler uses a sysroot by default
- OSX_UNIV_OPTS=${wxUSE_UNIVERSAL_BINARY:+"-isysroot '$wxUSE_UNIVERSAL_BINARY'"}
- fi
- OSX_UNIV_OPTS="$OSX_UNIV_OPTS -arch ppc -arch i386"
- CXXFLAGS="$OSX_UNIV_OPTS $CXXFLAGS"
- CFLAGS="$OSX_UNIV_OPTS $CFLAGS"
- LDFLAGS="$OSX_UNIV_OPTS $LDFLAGS"
- bk_use_pch=no
- fi
- # TODO: where do we add "-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk" for libtool (static builds only)?
- # The makefile currently uses AR and RANLIB, which libtool apparently supercedes.
-fi
-
dnl gcc 3.4 has a pch bug which truncates wide character constants in headers.
dnl Hopefully for a non-unicode build there aren't any wide constants in
dnl headers, but for a unicode build it's best to disable pch.
AC_BAKEFILE([m4_include(autoconf_inc.m4)])
+dnl make install path absolute (if not already);
+dnl will fail with (some) MSDOS paths
+case ${INSTALL} in
+ /* ) # Absolute
+ ;;
+ ?:* ) # Drive letter, considered as absolute.
+ ;;
+ *)
+ INSTALL=`pwd`/${INSTALL} ;;
+esac
+
+if test "$wxUSE_GUI" = "yes"; then
+
+if test "$wxUSE_MSW" = 1 ; then
+ if test "x$WINDRES" = "x"; then
+ AC_MSG_ERROR([Required windres program not found])
+ fi
+
+ RESCOMP="$WINDRES"
+fi
+
+if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1; then
+ dnl base name of the resource file for wxMac must be the same
+ dnl as library installation base name (-install_name)
+ WX_RESOURCES_MACOSX_ASCII="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.r"
+ WX_RESOURCES_MACOSX_DATA="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.rsrc"
+
+ dnl add the resources target for wxMac
+ LIBWXMACRES="\$(wx_top_builddir)/lib/${WX_RESOURCES_MACOSX_ASCII}"
+
+ AC_CHECK_PROG(DEREZ, DeRez, DeRez, /Developer/Tools/DeRez)
+
+ MACSETFILE="\$(SETFILE)"
+
+ dnl resources are bundled both with shared library and applications
+ dnl since the carb resource *must* be included in the application
+ if test "$wxUSE_OSX_CARBON" = 1; then
+ POSTLINK_COMMAND="\$(REZ) -d __DARWIN__ -t APPL Carbon.r -o"
+ RESCOMP="$REZ"
+ WXCONFIG_RESFLAGS="-d __DARWIN__ -t APPL Carbon.r -o"
+ else
+ POSTLINK_COMMAND="cat /dev/null | \$(REZ) -d __DARWIN__ -t APPL ${LIBWXMACRES}"
+ RESCOMP="cat /dev/null \| $REZ"
+ WXCONFIG_RESFLAGS="-d __DARWIN__ -t APPL \$libdir/$WX_RESOURCES_MACOSX_ASCII"
+ fi
+
+else
+ dnl default value is to (silently) do nothing in the makefile
+ MACSETFILE="@true"
+
+ if test "$wxUSE_PM" = 1; then
+ RESCOMP="emxbind"
+ WXCONFIG_RESFLAGS="-ep"
+
+ dnl Is this one really used anywhere for pm?
+ POSTLINK_COMMAND="$RESCOMP $WXCONFIG_RESFLAGS"
+ else
+ POSTLINK_COMMAND="@true"
+ fi
+fi
+
+fi
+dnl wxUSE_GUI = 1
+
+
dnl find out if the compiler supports PCH
dnl
dnl TODO: this should be in bakefile
AC_MSG_WARN([*** see http://gcc.gnu.org/bugzilla/show_bug.cgi?id=13361])
fi
- CPPFLAGS="-DWX_PRECOMP $CPPFLAGS"
+ # Our WX_PRECOMP flag does not make sense for any language except C++ because
+ # the headers that benefit from precompilation are mostly C++ headers.
+ CXXFLAGS="-DWX_PRECOMP $CXXFLAGS"
+ # When Bakefile can do multi-language PCH (e.g. C++ and Objective-C++) enable this:
+ #OBJCXXFLAGS="-DWX_PRECOMP $CXXFLAGS"
fi
dnl HACK ALERT!!
fi
if test "$wxUSE_SHARED" = "yes"; then
-
- dnl We get the shared build linker from bakefile, since it
- dnl moved all the logic for this out of this file and into
- dnl its own macro. But it can't decide on whether to return
- dnl us $(VAR), ${VAR}, or the present expansion of VAR.
- dnl So normalise and expand everything here now, because its
- dnl not going to change inside wx-config anyway.
- sanitised_bakefile_mess=`echo "$SHARED_LD_CXX" | tr -d '()'`
- EXE_LINKER=`eval echo "$sanitised_bakefile_mess"`
-
dnl Need addtional flag on OS/2, so override bakefiles value
dnl (there currently is no suitable variable to which the
dnl missing flags could be added, AFAICS. SN, 18.12.2004. )
cp -p ${srcdir}/src/os2/dllar.sh .
;;
esac
-else
-
- dnl No bakefile support for static builds, but this should be ok for most.
- EXE_LINKER="$CXX -o"
-
fi
if test "$wxUSE_OMF" = "yes"; then
case "${host}" in
*-*-solaris2* )
dnl system packages are compiled with Sun CC and so pkg-config outputs
dnl CC-specific "-mt" flag, remove it when using gcc
- if "$GCC" = yes; then
+ if test "$GCC" = yes; then
CPPFLAGS=`echo $CPPFLAGS | sed 's/-mt//'`
LIBS=`echo $LIBS | sed 's/-mt//'`
EXTRALIBS_GUI=`echo $EXTRALIBS_GUI | sed 's/-mt//'`
AC_SUBST(WXCONFIG_RPATH)
AC_SUBST(WXCONFIG_LDFLAGS_GUI)
AC_SUBST(WXCONFIG_RESFLAGS)
-AC_SUBST(EXE_LINKER)
dnl distribution vars
AC_SUBST(GUIDIST)
[ chmod +x lib/wx/config/inplace-${TOOLCHAIN_FULLNAME} ],
[ TOOLCHAIN_FULLNAME="${TOOLCHAIN_FULLNAME}" ])
+dnl this is used to run ifacecheck with the same flags used by the compiler
+dnl for the real compilation:
+AC_CONFIG_FILES([ utils/ifacecheck/rungccxml.sh ],
+ [ chmod +x utils/ifacecheck/rungccxml.sh ])
+
if test "$wx_cv_version_script" = "yes"; then
AC_CONFIG_FILES(version-script)
fi
dnl Configure samples, demos etc. directories, but only if they are present:
if test "$wxUSE_GUI" = "yes"; then
SUBDIRS="samples demos utils"
-else dnl we build wxBase only
+else
+ dnl we build wxBase only
dnl there are no wxBase programs in demos
SUBDIRS="samples utils"
fi
dnl Add tests to the list of subdirs if cppunit 1.8.0+ is detected
AM_PATH_CPPUNIT(1.8.0, [SUBDIRS="$SUBDIRS tests"])
-for subdir in `echo $SUBDIRS`; do
+for subdir in $SUBDIRS; do
if test -d ${srcdir}/${subdir} ; then
if test "$wxUSE_GUI" = "yes"; then
if test ${subdir} = "samples"; then
dnl only take those samples which compile in the current
dnl configuration and which exist
makefiles="samples/Makefile.in $makefiles"
- for sample in `echo $SAMPLES_SUBDIRS`; do
+ for sample in $SAMPLES_SUBDIRS; do
if test -d $srcdir/samples/$sample; then
makefiles="samples/$sample/Makefile.in $makefiles"
fi
dnl assume that everything compiles for utils &c
dnl any that shouldn't be built can be added to
dnl DISABLED_UTILS, DISABLED_DEMOS
- disabled_var=DISABLED_`echo $subdir | tr [[a-z]] [[A-Z]]`;
+ disabled_var=DISABLED_`echo $subdir | tr '[[a-z]]' '[[A-Z]]'`
eval "disabled=\$$disabled_var"
disabled=/`echo X $disabled | sed 's@ @/|/@g'`/
makefiles=`(cd $srcdir ; find $subdir -name Makefile.in) | $EGREP -v "$disabled"`
fi
- else dnl we build wxBase only
- dnl don't take all samples/utils, just those which build with
- dnl wxBase
+ else
+ dnl we build wxBase only
+ dnl don't take all samples/utils, just those which build with wxBase
if test ${subdir} = "samples"; then
- makefiles="samples/Makefile.in samples/console/Makefile.in"
+ dnl only take those samples which compile in the current
+ dnl configuration and which exist
+ makefiles="samples/Makefile.in $makefiles"
+ for sample in `echo $SAMPLES_SUBDIRS`; do
+ if test -d $srcdir/samples/$sample; then
+ makefiles="samples/$sample/Makefile.in $makefiles"
+ fi
+ done
elif test ${subdir} = "utils"; then
makefiles=""
- for util in HelpGen tex2rtf ; do
+ for util in ifacecheck ; do
if test -d $srcdir/utils/$util ; then
- makefiles="utils/$util/Makefile.in \
- utils/$util/src/Makefile.in \
+ makefiles="utils/$util/src/Makefile.in \
$makefiles"
fi
done
- else dnl assume that everything compiles for tests
+ else
+ dnl assume that everything compiles for tests
makefiles=`(cd $srcdir ; find $subdir -name Makefile.in)`
fi
fi
echo " Should wxWidgets be compiled in debug mode? ${wxUSE_DEBUG:-no}"
echo " Should wxWidgets be linked as a shared library? ${wxUSE_SHARED:-no}"
-echo -n " Should wxWidgets support Unicode? ${wxUSE_UNICODE:-no}"
+echo $ECHO_N " Should wxWidgets support Unicode? ${wxUSE_UNICODE:-no}$ECHO_C"
if test "$wxUSE_UNICODE" = "yes"; then
if test "$wxUSE_UNICODE_UTF8" = "yes"; then
echo " (using UTF-8)"
echo " wxWidgets 2.8 ${WXWIN_COMPATIBILITY_2_8:-yes}"
echo " Which libraries should wxWidgets use?"
+echo " STL ${wxUSE_STL}"
echo " jpeg ${wxUSE_LIBJPEG-none}"
echo " png ${wxUSE_LIBPNG-none}"
echo " regex ${wxUSE_REGEX}"
echo " xpm ${wxUSE_LIBXPM-none}"
fi
echo " zlib ${wxUSE_ZLIB}"
-echo " odbc ${wxUSE_ODBC}"
echo " expat ${wxUSE_EXPAT}"
echo " libmspack ${wxUSE_LIBMSPACK}"
echo " sdl ${wxUSE_LIBSDL}"
projects / wxWidgets.git / blobdiff