+
+# Check whether --with-cygwin or --without-cygwin was given.
+if test "${with_cygwin+set}" = set; then
+ withval="$with_cygwin"
+ wxUSE_CYGWIN="$withval" CACHE_CYGWIN=1 TOOLKIT_GIVEN=1
+fi
+
+# Check whether --with-mingw or --without-mingw was given.
+if test "${with_mingw+set}" = set; then
+ withval="$with_mingw"
+ wxUSE_MINGW="$withval" CACHE_MINGW=1 TOOLKIT_GIVEN=1
+fi
+
+
+# Check whether --with-gtk-prefix or --without-gtk-prefix was given.
+if test "${with_gtk_prefix+set}" = set; then
+ withval="$with_gtk_prefix"
+ gtk_config_prefix="$withval"
+else
+ gtk_config_prefix=""
+fi
+
+# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
+if test "${with_gtk_exec_prefix+set}" = set; then
+ withval="$with_gtk_exec_prefix"
+ gtk_config_exec_prefix="$withval"
+else
+ gtk_config_exec_prefix=""
+fi
+
+
+
+ echo $ac_n "checking "for --with-dmalloc"""... $ac_c" 1>&6
+echo "configure:1488: checking "for --with-dmalloc"" >&5
+ no_cache=0
+ # Check whether --with-dmalloc or --without-dmalloc was given.
+if test "${with_dmalloc+set}" = set; then
+ withval="$with_dmalloc"
+
+ if test "$withval" = yes; then
+ ac_cv_use_dmalloc='wxUSE_DMALLOC=yes'
+ else
+ ac_cv_use_dmalloc='wxUSE_DMALLOC=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DMALLOC" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dmalloc='wxUSE_DMALLOC='$DEFAULT_wxUSE_DMALLOC
+
+fi
+
+
+ eval "$ac_cv_use_dmalloc"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dmalloc >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DMALLOC" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --with-zlib"""... $ac_c" 1>&6
+echo "configure:1527: checking "for --with-zlib"" >&5
+ no_cache=0
+ # Check whether --with-zlib or --without-zlib was given.
+if test "${with_zlib+set}" = set; then
+ withval="$with_zlib"
+
+ if test "$withval" = yes; then
+ ac_cv_use_zlib='wxUSE_ZLIB=yes'
+ else
+ ac_cv_use_zlib='wxUSE_ZLIB=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ZLIB" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_zlib='wxUSE_ZLIB='$DEFAULT_wxUSE_ZLIB
+
+fi
+
+
+ eval "$ac_cv_use_zlib"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_zlib >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ZLIB" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --with-libpng"""... $ac_c" 1>&6
+echo "configure:1566: checking "for --with-libpng"" >&5
+ no_cache=0
+ # Check whether --with-libpng or --without-libpng was given.
+if test "${with_libpng+set}" = set; then
+ withval="$with_libpng"
+
+ if test "$withval" = yes; then
+ ac_cv_use_libpng='wxUSE_LIBPNG=yes'
+ else
+ ac_cv_use_libpng='wxUSE_LIBPNG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LIBPNG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_libpng='wxUSE_LIBPNG='$DEFAULT_wxUSE_LIBPNG
+
+fi
+
+
+ eval "$ac_cv_use_libpng"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_libpng >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LIBPNG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --with-libgif"""... $ac_c" 1>&6
+echo "configure:1605: checking "for --with-libgif"" >&5
+ no_cache=0
+ # Check whether --with-libgif or --without-libgif was given.
+if test "${with_libgif+set}" = set; then
+ withval="$with_libgif"
+
+ if test "$withval" = yes; then
+ ac_cv_use_libgif='wxUSE_LIBGIF=yes'
+ else
+ ac_cv_use_libgif='wxUSE_LIBGIF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LIBGIF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_libgif='wxUSE_LIBGIF='$DEFAULT_wxUSE_LIBGIF
+
+fi
+
+
+ eval "$ac_cv_use_libgif"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_libgif >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LIBGIF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --with-libjpeg"""... $ac_c" 1>&6
+echo "configure:1644: checking "for --with-libjpeg"" >&5
+ no_cache=0
+ # Check whether --with-libjpeg or --without-libjpeg was given.
+if test "${with_libjpeg+set}" = set; then
+ withval="$with_libjpeg"
+
+ if test "$withval" = yes; then
+ ac_cv_use_libjpeg='wxUSE_LIBJPEG=yes'
+ else
+ ac_cv_use_libjpeg='wxUSE_LIBJPEG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LIBJPEG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_libjpeg='wxUSE_LIBJPEG='$DEFAULT_wxUSE_LIBJPEG
+
+fi
+
+
+ eval "$ac_cv_use_libjpeg"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_libjpeg >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LIBJPEG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --with-opengl"""... $ac_c" 1>&6
+echo "configure:1683: checking "for --with-opengl"" >&5
+ no_cache=0
+ # Check whether --with-opengl or --without-opengl was given.
+if test "${with_opengl+set}" = set; then
+ withval="$with_opengl"
+
+ if test "$withval" = yes; then
+ ac_cv_use_opengl='wxUSE_OPENGL=yes'
+ else
+ ac_cv_use_opengl='wxUSE_OPENGL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_OPENGL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_opengl='wxUSE_OPENGL='$DEFAULT_wxUSE_OPENGL
+
+fi
+
+
+ eval "$ac_cv_use_opengl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_opengl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_OPENGL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --with-odbc"""... $ac_c" 1>&6
+echo "configure:1722: checking "for --with-odbc"" >&5
+ no_cache=0
+ # Check whether --with-odbc or --without-odbc was given.
+if test "${with_odbc+set}" = set; then
+ withval="$with_odbc"
+
+ if test "$withval" = yes; then
+ ac_cv_use_odbc='wxUSE_ODBC=yes'
+ else
+ ac_cv_use_odbc='wxUSE_ODBC=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_ODBC" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_odbc='wxUSE_ODBC='$DEFAULT_wxUSE_ODBC
+
+fi
+
+
+ eval "$ac_cv_use_odbc"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_odbc >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_ODBC" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+
+ echo $ac_n "checking "for --enable-shared"""... $ac_c" 1>&6
+echo "configure:1764: checking "for --enable-shared"" >&5
+ no_cache=0
+ # Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_shared='wxUSE_SHARED=yes'
+ else
+ ac_cv_use_shared='wxUSE_SHARED=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SHARED" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_shared='wxUSE_SHARED='$DEFAULT_wxUSE_SHARED
+
+fi
+
+
+ eval "$ac_cv_use_shared"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_shared >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SHARED" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-optimise"""... $ac_c" 1>&6
+echo "configure:1803: checking "for --enable-optimise"" >&5
+ no_cache=0
+ # Check whether --enable-optimise or --disable-optimise was given.
+if test "${enable_optimise+set}" = set; then
+ enableval="$enable_optimise"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_optimise='wxUSE_OPTIMISE=yes'
+ else
+ ac_cv_use_optimise='wxUSE_OPTIMISE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_OPTIMISE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_optimise='wxUSE_OPTIMISE='$DEFAULT_wxUSE_OPTIMISE
+
+fi
+
+
+ eval "$ac_cv_use_optimise"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_optimise >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_OPTIMISE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-debug"""... $ac_c" 1>&6
+echo "configure:1842: checking "for --enable-debug"" >&5
+ no_cache=0
+ # Check whether --enable-debug or --disable-debug was given.
+if test "${enable_debug+set}" = set; then
+ enableval="$enable_debug"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug='wxUSE_DEBUG=yes'
+ else
+ ac_cv_use_debug='wxUSE_DEBUG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug='wxUSE_DEBUG='$DEFAULT_wxUSE_DEBUG
+
+fi
+
+
+ eval "$ac_cv_use_debug"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+if test "$wxUSE_DEBUG" = "yes"; then
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=yes
+elif test "$wxUSE_DEBUG" = "no"; then
+ DEFAULT_wxUSE_DEBUG_FLAG=no
+ DEFAULT_wxUSE_DEBUG_INFO=no
+fi
+
+
+ echo $ac_n "checking "for --enable-debug_flag"""... $ac_c" 1>&6
+echo "configure:1890: checking "for --enable-debug_flag"" >&5
+ no_cache=0
+ # Check whether --enable-debug_flag or --disable-debug_flag was given.
+if test "${enable_debug_flag+set}" = set; then
+ enableval="$enable_debug_flag"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG=yes'
+ else
+ ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG_FLAG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG='$DEFAULT_wxUSE_DEBUG_FLAG
+
+fi
+
+
+ eval "$ac_cv_use_debug_flag"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug_flag >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG_FLAG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-debug_info"""... $ac_c" 1>&6
+echo "configure:1929: checking "for --enable-debug_info"" >&5
+ no_cache=0
+ # Check whether --enable-debug_info or --disable-debug_info was given.
+if test "${enable_debug_info+set}" = set; then
+ enableval="$enable_debug_info"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug_info='wxUSE_DEBUG_INFO=yes'
+ else
+ ac_cv_use_debug_info='wxUSE_DEBUG_INFO=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG_INFO" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug_info='wxUSE_DEBUG_INFO='$DEFAULT_wxUSE_DEBUG_INFO
+
+fi
+
+
+ eval "$ac_cv_use_debug_info"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug_info >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG_INFO" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-debug_gdb"""... $ac_c" 1>&6
+echo "configure:1968: checking "for --enable-debug_gdb"" >&5
+ no_cache=0
+ # Check whether --enable-debug_gdb or --disable-debug_gdb was given.
+if test "${enable_debug_gdb+set}" = set; then
+ enableval="$enable_debug_gdb"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB=yes'
+ else
+ ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG_GDB" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB='$DEFAULT_wxUSE_DEBUG_GDB
+
+fi
+
+
+ eval "$ac_cv_use_debug_gdb"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug_gdb >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG_GDB" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-debug_cntxt"""... $ac_c" 1>&6
+echo "configure:2007: checking "for --enable-debug_cntxt"" >&5
+ no_cache=0
+ # Check whether --enable-debug_cntxt or --disable-debug_cntxt was given.
+if test "${enable_debug_cntxt+set}" = set; then
+ enableval="$enable_debug_cntxt"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT=yes'
+ else
+ ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DEBUG_CONTEXT" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT='$DEFAULT_wxUSE_DEBUG_CONTEXT
+
+fi
+
+
+ eval "$ac_cv_use_debug_cntxt"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_debug_cntxt >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DEBUG_CONTEXT" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-mem_tracing"""... $ac_c" 1>&6
+echo "configure:2046: checking "for --enable-mem_tracing"" >&5
+ no_cache=0
+ # Check whether --enable-mem_tracing or --disable-mem_tracing was given.
+if test "${enable_mem_tracing+set}" = set; then
+ enableval="$enable_mem_tracing"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_mem_tracing='wxUSE_MEM_TRACING=yes'
+ else
+ ac_cv_use_mem_tracing='wxUSE_MEM_TRACING=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_MEM_TRACING" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_mem_tracing='wxUSE_MEM_TRACING='$DEFAULT_wxUSE_MEM_TRACING
+
+fi
+
+
+ eval "$ac_cv_use_mem_tracing"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_mem_tracing >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_MEM_TRACING" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-profile"""... $ac_c" 1>&6
+echo "configure:2085: checking "for --enable-profile"" >&5
+ no_cache=0
+ # Check whether --enable-profile or --disable-profile was given.
+if test "${enable_profile+set}" = set; then
+ enableval="$enable_profile"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_profile='wxUSE_PROFILE=yes'
+ else
+ ac_cv_use_profile='wxUSE_PROFILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PROFILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_profile='wxUSE_PROFILE='$DEFAULT_wxUSE_PROFILE
+
+fi
+
+
+ eval "$ac_cv_use_profile"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_profile >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PROFILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-no_rtti"""... $ac_c" 1>&6
+echo "configure:2124: checking "for --enable-no_rtti"" >&5
+ no_cache=0
+ # Check whether --enable-no_rtti or --disable-no_rtti was given.
+if test "${enable_no_rtti+set}" = set; then
+ enableval="$enable_no_rtti"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_no_rtti='wxUSE_NO_RTTI=yes'
+ else
+ ac_cv_use_no_rtti='wxUSE_NO_RTTI=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NO_RTTI" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_no_rtti='wxUSE_NO_RTTI='$DEFAULT_wxUSE_NO_RTTI
+
+fi
+
+
+ eval "$ac_cv_use_no_rtti"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_no_rtti >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NO_RTTI" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-no_exceptions"""... $ac_c" 1>&6
+echo "configure:2163: checking "for --enable-no_exceptions"" >&5
+ no_cache=0
+ # Check whether --enable-no_exceptions or --disable-no_exceptions was given.
+if test "${enable_no_exceptions+set}" = set; then
+ enableval="$enable_no_exceptions"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS=yes'
+ else
+ ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NO_EXCEPTIONS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS='$DEFAULT_wxUSE_NO_EXCEPTIONS
+
+fi
+
+
+ eval "$ac_cv_use_no_exceptions"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_no_exceptions >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NO_EXCEPTIONS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-permissive"""... $ac_c" 1>&6
+echo "configure:2202: checking "for --enable-permissive"" >&5
+ no_cache=0
+ # Check whether --enable-permissive or --disable-permissive was given.
+if test "${enable_permissive+set}" = set; then
+ enableval="$enable_permissive"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_permissive='wxUSE_PERMISSIVE=yes'
+ else
+ ac_cv_use_permissive='wxUSE_PERMISSIVE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_PERMISSIVE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_permissive='wxUSE_PERMISSIVE='$DEFAULT_wxUSE_PERMISSIVE
+
+fi
+
+
+ eval "$ac_cv_use_permissive"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_permissive >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_PERMISSIVE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-no_deps"""... $ac_c" 1>&6
+echo "configure:2241: checking "for --enable-no_deps"" >&5
+ no_cache=0
+ # Check whether --enable-no_deps or --disable-no_deps was given.
+if test "${enable_no_deps+set}" = set; then
+ enableval="$enable_no_deps"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_no_deps='wxUSE_NO_DEPS=yes'
+ else
+ ac_cv_use_no_deps='wxUSE_NO_DEPS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_NO_DEPS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_no_deps='wxUSE_NO_DEPS='$DEFAULT_wxUSE_NO_DEPS
+
+fi
+
+
+ eval "$ac_cv_use_no_deps"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_no_deps >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_NO_DEPS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-gui"""... $ac_c" 1>&6
+echo "configure:2282: checking "for --enable-gui"" >&5
+ no_cache=0
+ # Check whether --enable-gui or --disable-gui was given.
+if test "${enable_gui+set}" = set; then
+ enableval="$enable_gui"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_gui='wxUSE_GUI=yes'
+ else
+ ac_cv_use_gui='wxUSE_GUI=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_GUI" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_gui='wxUSE_GUI='$DEFAULT_wxUSE_GUI
+
+fi
+
+
+ eval "$ac_cv_use_gui"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_gui >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_GUI" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+
+
+ echo $ac_n "checking "for --enable-intl"""... $ac_c" 1>&6
+echo "configure:2323: checking "for --enable-intl"" >&5
+ no_cache=0
+ # Check whether --enable-intl or --disable-intl was given.
+if test "${enable_intl+set}" = set; then
+ enableval="$enable_intl"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_intl='wxUSE_INTL=yes'
+ else
+ ac_cv_use_intl='wxUSE_INTL=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_INTL" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_intl='wxUSE_INTL='$DEFAULT_wxUSE_INTL
+
+fi
+
+
+ eval "$ac_cv_use_intl"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_intl >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_INTL" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-config"""... $ac_c" 1>&6
+echo "configure:2362: checking "for --enable-config"" >&5
+ no_cache=0
+ # Check whether --enable-config or --disable-config was given.
+if test "${enable_config+set}" = set; then
+ enableval="$enable_config"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_config='wxUSE_CONFIG=yes'
+ else
+ ac_cv_use_config='wxUSE_CONFIG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_CONFIG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_config='wxUSE_CONFIG='$DEFAULT_wxUSE_CONFIG
+
+fi
+
+
+ eval "$ac_cv_use_config"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_config >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_CONFIG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-sockets"""... $ac_c" 1>&6
+echo "configure:2401: checking "for --enable-sockets"" >&5
+ no_cache=0
+ # Check whether --enable-sockets or --disable-sockets was given.
+if test "${enable_sockets+set}" = set; then
+ enableval="$enable_sockets"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_sockets='wxUSE_SOCKETS=yes'
+ else
+ ac_cv_use_sockets='wxUSE_SOCKETS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_SOCKETS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_sockets='wxUSE_SOCKETS='$DEFAULT_wxUSE_SOCKETS
+
+fi
+
+
+ eval "$ac_cv_use_sockets"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_sockets >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_SOCKETS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-ipc"""... $ac_c" 1>&6
+echo "configure:2440: checking "for --enable-ipc"" >&5
+ no_cache=0
+ # Check whether --enable-ipc or --disable-ipc was given.
+if test "${enable_ipc+set}" = set; then
+ enableval="$enable_ipc"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_ipc='wxUSE_IPC=yes'
+ else
+ ac_cv_use_ipc='wxUSE_IPC=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_IPC" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_ipc='wxUSE_IPC='$DEFAULT_wxUSE_IPC
+
+fi
+
+
+ eval "$ac_cv_use_ipc"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_ipc >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_IPC" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-apple_ieee"""... $ac_c" 1>&6
+echo "configure:2479: checking "for --enable-apple_ieee"" >&5
+ no_cache=0
+ # Check whether --enable-apple_ieee or --disable-apple_ieee was given.
+if test "${enable_apple_ieee+set}" = set; then
+ enableval="$enable_apple_ieee"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=yes'
+ else
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_APPLE_IEEE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE='$DEFAULT_wxUSE_APPLE_IEEE
+
+fi
+
+
+ eval "$ac_cv_use_apple_ieee"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_apple_ieee >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_APPLE_IEEE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-timedate"""... $ac_c" 1>&6
+echo "configure:2518: checking "for --enable-timedate"" >&5
+ no_cache=0
+ # Check whether --enable-timedate or --disable-timedate was given.
+if test "${enable_timedate+set}" = set; then
+ enableval="$enable_timedate"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_timedate='wxUSE_TIMEDATE=yes'
+ else
+ ac_cv_use_timedate='wxUSE_TIMEDATE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TIMEDATE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_timedate='wxUSE_TIMEDATE='$DEFAULT_wxUSE_TIMEDATE
+
+fi
+
+
+ eval "$ac_cv_use_timedate"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_timedate >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TIMEDATE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-wave"""... $ac_c" 1>&6
+echo "configure:2557: checking "for --enable-wave"" >&5
+ no_cache=0
+ # Check whether --enable-wave or --disable-wave was given.
+if test "${enable_wave+set}" = set; then
+ enableval="$enable_wave"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wave='wxUSE_WAVE=yes'
+ else
+ ac_cv_use_wave='wxUSE_WAVE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WAVE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wave='wxUSE_WAVE='$DEFAULT_wxUSE_WAVE
+
+fi
+
+
+ eval "$ac_cv_use_wave"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wave >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WAVE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-fraction"""... $ac_c" 1>&6
+echo "configure:2596: checking "for --enable-fraction"" >&5
+ no_cache=0
+ # Check whether --enable-fraction or --disable-fraction was given.
+if test "${enable_fraction+set}" = set; then
+ enableval="$enable_fraction"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_fraction='wxUSE_FRACTION=yes'
+ else
+ ac_cv_use_fraction='wxUSE_FRACTION=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FRACTION" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_fraction='wxUSE_FRACTION='$DEFAULT_wxUSE_FRACTION
+
+fi
+
+
+ eval "$ac_cv_use_fraction"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_fraction >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FRACTION" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-dynlib"""... $ac_c" 1>&6
+echo "configure:2635: checking "for --enable-dynlib"" >&5
+ no_cache=0
+ # Check whether --enable-dynlib or --disable-dynlib was given.
+if test "${enable_dynlib+set}" = set; then
+ enableval="$enable_dynlib"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=yes'
+ else
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_DYNLIB_CLASS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS='$DEFAULT_wxUSE_DYNLIB_CLASS
+
+fi
+
+
+ eval "$ac_cv_use_dynlib"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_dynlib >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_DYNLIB_CLASS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-longlong"""... $ac_c" 1>&6
+echo "configure:2674: checking "for --enable-longlong"" >&5
+ no_cache=0
+ # Check whether --enable-longlong or --disable-longlong was given.
+if test "${enable_longlong+set}" = set; then
+ enableval="$enable_longlong"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_longlong='wxUSE_LONGLONG=yes'
+ else
+ ac_cv_use_longlong='wxUSE_LONGLONG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LONGLONG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_longlong='wxUSE_LONGLONG='$DEFAULT_wxUSE_LONGLONG
+
+fi
+
+
+ eval "$ac_cv_use_longlong"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_longlong >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LONGLONG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-log"""... $ac_c" 1>&6
+echo "configure:2713: checking "for --enable-log"" >&5
+ no_cache=0
+ # Check whether --enable-log or --disable-log was given.
+if test "${enable_log+set}" = set; then
+ enableval="$enable_log"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_log='wxUSE_LOG=yes'
+ else
+ ac_cv_use_log='wxUSE_LOG=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_LOG" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_log='wxUSE_LOG='$DEFAULT_wxUSE_LOG
+
+fi
+
+
+ eval "$ac_cv_use_log"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_log >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_LOG" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-streams"""... $ac_c" 1>&6
+echo "configure:2752: checking "for --enable-streams"" >&5
+ no_cache=0
+ # Check whether --enable-streams or --disable-streams was given.
+if test "${enable_streams+set}" = set; then
+ enableval="$enable_streams"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_streams='wxUSE_STREAMS=yes'
+ else
+ ac_cv_use_streams='wxUSE_STREAMS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STREAMS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_streams='wxUSE_STREAMS='$DEFAULT_wxUSE_STREAMS
+
+fi
+
+
+ eval "$ac_cv_use_streams"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_streams >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STREAMS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-file"""... $ac_c" 1>&6
+echo "configure:2791: checking "for --enable-file"" >&5
+ no_cache=0
+ # Check whether --enable-file or --disable-file was given.
+if test "${enable_file+set}" = set; then
+ enableval="$enable_file"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_file='wxUSE_FILE=yes'
+ else
+ ac_cv_use_file='wxUSE_FILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_file='wxUSE_FILE='$DEFAULT_wxUSE_FILE
+
+fi
+
+
+ eval "$ac_cv_use_file"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_file >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-textfile"""... $ac_c" 1>&6
+echo "configure:2830: checking "for --enable-textfile"" >&5
+ no_cache=0
+ # Check whether --enable-textfile or --disable-textfile was given.
+if test "${enable_textfile+set}" = set; then
+ enableval="$enable_textfile"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_textfile='wxUSE_TEXTFILE=yes'
+ else
+ ac_cv_use_textfile='wxUSE_TEXTFILE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_TEXTFILE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_textfile='wxUSE_TEXTFILE='$DEFAULT_wxUSE_TEXTFILE
+
+fi
+
+
+ eval "$ac_cv_use_textfile"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_textfile >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_TEXTFILE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-unicode"""... $ac_c" 1>&6
+echo "configure:2869: checking "for --enable-unicode"" >&5
+ no_cache=0
+ # Check whether --enable-unicode or --disable-unicode was given.
+if test "${enable_unicode+set}" = set; then
+ enableval="$enable_unicode"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_unicode='wxUSE_UNICODE=yes'
+ else
+ ac_cv_use_unicode='wxUSE_UNICODE=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_UNICODE" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_unicode='wxUSE_UNICODE='$DEFAULT_wxUSE_UNICODE
+
+fi
+
+
+ eval "$ac_cv_use_unicode"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_unicode >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_UNICODE" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-wcsrtombs"""... $ac_c" 1>&6
+echo "configure:2908: checking "for --enable-wcsrtombs"" >&5
+ no_cache=0
+ # Check whether --enable-wcsrtombs or --disable-wcsrtombs was given.
+if test "${enable_wcsrtombs+set}" = set; then
+ enableval="$enable_wcsrtombs"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=yes'
+ else
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_WCSRTOMBS" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS='$DEFAULT_wxUSE_WCSRTOMBS
+
+fi
+
+
+ eval "$ac_cv_use_wcsrtombs"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wcsrtombs >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_WCSRTOMBS" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-wxprintfv"""... $ac_c" 1>&6
+echo "configure:2947: checking "for --enable-wxprintfv"" >&5
+ no_cache=0
+ # Check whether --enable-wxprintfv or --disable-wxprintfv was given.
+if test "${enable_wxprintfv+set}" = set; then
+ enableval="$enable_wxprintfv"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=yes'
+ else
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_EXPERIMENTAL_PRINTF" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF='$DEFAULT_wxUSE_EXPERIMENTAL_PRINTF
+
+fi
+
+
+ eval "$ac_cv_use_wxprintfv"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_wxprintfv >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_EXPERIMENTAL_PRINTF" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-joystick"""... $ac_c" 1>&6
+echo "configure:2986: checking "for --enable-joystick"" >&5
+ no_cache=0
+ # Check whether --enable-joystick or --disable-joystick was given.
+if test "${enable_joystick+set}" = set; then
+ enableval="$enable_joystick"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_joystick='wxUSE_JOYSTICK=yes'
+ else
+ ac_cv_use_joystick='wxUSE_JOYSTICK=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_JOYSTICK" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_joystick='wxUSE_JOYSTICK='$DEFAULT_wxUSE_JOYSTICK
+
+fi
+
+
+ eval "$ac_cv_use_joystick"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_joystick >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_JOYSTICK" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-std_iostreams"""... $ac_c" 1>&6
+echo "configure:3025: checking "for --enable-std_iostreams"" >&5
+ no_cache=0
+ # Check whether --enable-std_iostreams or --disable-std_iostreams was given.
+if test "${enable_std_iostreams+set}" = set; then
+ enableval="$enable_std_iostreams"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=yes'
+ else
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_STD_IOSTREAM" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM='$DEFAULT_wxUSE_STD_IOSTREAM
+
+fi
+
+
+ eval "$ac_cv_use_std_iostreams"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_std_iostreams >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_STD_IOSTREAM" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-fs_inet"""... $ac_c" 1>&6
+echo "configure:3064: checking "for --enable-fs_inet"" >&5
+ no_cache=0
+ # Check whether --enable-fs_inet or --disable-fs_inet was given.
+if test "${enable_fs_inet+set}" = set; then
+ enableval="$enable_fs_inet"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_fs_inet='wxUSE_FS_INET=yes'
+ else
+ ac_cv_use_fs_inet='wxUSE_FS_INET=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FS_INET" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_fs_inet='wxUSE_FS_INET='$DEFAULT_wxUSE_FS_INET
+
+fi
+
+
+ eval "$ac_cv_use_fs_inet"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_fs_inet >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FS_INET" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-fs_zip"""... $ac_c" 1>&6
+echo "configure:3103: checking "for --enable-fs_zip"" >&5
+ no_cache=0
+ # Check whether --enable-fs_zip or --disable-fs_zip was given.
+if test "${enable_fs_zip+set}" = set; then
+ enableval="$enable_fs_zip"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP=yes'
+ else
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP=no'
+ fi
+
+else
+
+ LINE=`grep "wxUSE_FS_ZIP" ${wx_arg_cache_file}`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ else
+ no_cache=1
+ fi
+
+ ac_cv_use_fs_zip='wxUSE_FS_ZIP='$DEFAULT_wxUSE_FS_ZIP
+
+fi
+
+
+ eval "$ac_cv_use_fs_zip"
+ if test "$no_cache" != 1; then
+ echo $ac_cv_use_fs_zip >> ${wx_arg_cache_file}.tmp
+ fi
+
+ if test "$wxUSE_FS_ZIP" = yes; then
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+
+ echo $ac_n "checking "for --enable-zipstream"""... $ac_c" 1>&6
+echo "configure:3142: checking "for --enable-zipstream"" >&5
+ no_cache=0
+ # Check whether --enable-zipstream or --disable-zipstream was given.
+if test "${enable_zipstream+set}" = set; then
+ enableval="$enable_zipstream"
+
+ if test "$enableval" = yes; then
+ ac_cv_use_zipstream='wxUSE_ZIPSTREAM=yes'
+ else
+ ac_cv_use_zipstream='wxUSE_ZIPSTREAM=no'
+ fi
+