#include "wx/intl.h"
#include "wx/log.h"
+#include "wx/app.h"
#include "wx/utils.h"
#include "wx/process.h"
#include "wx/stream.h"
+#ifdef HAVE_STATFS
+# ifdef __BSD__
+# include <sys/param.h>
+# include <sys/mount.h>
+# else
+# include <sys/vfs.h>
+# endif
+#endif // HAVE_STATFS
+
+#ifdef HAVE_STATVFS
+ #include <sys/statvfs.h>
+
+ #define statfs statvfs
+#endif // HAVE_STATVFS
+
#if wxUSE_GUI
#include "wx/unix/execute.h"
#endif
+// SGI signal.h defines signal handler arguments differently depending on
+// whether _LANGUAGE_C_PLUS_PLUS is set or not - do set it
+#if defined(__SGI__) && !defined(_LANGUAGE_C_PLUS_PLUS)
+ #define _LANGUAGE_C_PLUS_PLUS 1
+#endif // SGI hack
+
#include <stdarg.h>
#include <dirent.h>
#include <string.h>
// process management
// ----------------------------------------------------------------------------
-int wxKill(long pid, wxSignal sig)
+int wxKill(long pid, wxSignal sig, wxKillError *rc)
{
- return kill((pid_t)pid, (int)sig);
+ int err = kill((pid_t)pid, (int)sig);
+ if ( rc )
+ {
+ switch ( err )
+ {
+ case 0:
+ *rc = wxKILL_OK;
+ break;
+
+ case EINVAL:
+ *rc = wxKILL_BAD_SIGNAL;
+ break;
+
+ case EPERM:
+ *rc = wxKILL_ACCESS_DENIED;
+ break;
+
+ case ESRCH:
+ *rc = wxKILL_NO_PROCESS;
+ break;
+
+ default:
+ // this goes against Unix98 docs so log it
+ wxLogDebug(_T("unexpected kill(2) return value %d"), err);
+
+ // something else...
+ *rc = wxKILL_ERROR;
+ }
+ }
+
+ return err;
}
#define WXEXECUTE_NARGS 127
return lRc;
}
-bool wxShell(const wxString& command)
+// ----------------------------------------------------------------------------
+// wxShell
+// ----------------------------------------------------------------------------
+
+static wxString wxMakeShellCommand(const wxString& command)
{
wxString cmd;
- if ( !!command )
- cmd.Printf(wxT("xterm -e %s"), command.c_str());
+ if ( !command )
+ {
+ // just an interactive shell
+ cmd = _T("xterm");
+ }
else
- cmd = command;
+ {
+ // execute command in a shell
+ cmd << _T("/bin/sh -c '") << command << _T('\'');
+ }
- return wxExecute(cmd) != 0;
+ return cmd;
}
-#if wxUSE_GUI
+bool wxShell(const wxString& command)
+{
+ return wxExecute(wxMakeShellCommand(command), TRUE /* sync */) == 0;
+}
-void wxHandleProcessTermination(wxEndProcessData *proc_data)
+bool wxShell(const wxString& command, wxArrayString& output)
{
- int pid = (proc_data->pid > 0) ? proc_data->pid : -(proc_data->pid);
+ wxCHECK_MSG( !!command, FALSE, _T("can't exec shell non interactively") );
- // waitpid is POSIX so should be available everywhere, however on older
- // systems wait() might be used instead in a loop (until the right pid
- // terminates)
- int status = 0;
- int rc;
+ return wxExecute(wxMakeShellCommand(command), output);
+}
- // wait for child termination and if waitpid() was interrupted, try again
- do
+#if wxUSE_GUI
+
+void wxHandleProcessTermination(wxEndProcessData *proc_data)
+{
+ // notify user about termination if required
+ if ( proc_data->process )
{
- rc = waitpid(pid, &status, 0);
+ proc_data->process->OnTerminate(proc_data->pid, proc_data->exitcode);
}
- while ( rc == -1 && errno == EINTR );
-
- if( rc == -1 || ! (WIFEXITED(status) || WIFSIGNALED(status)) )
+ // clean up
+ if ( proc_data->pid > 0 )
{
- wxLogSysError(_("Waiting for subprocess termination failed"));
- /* AFAIK, this can only happen if something went wrong within
- wxGTK, i.e. due to a race condition or some serious bug.
- After having fixed the order of statements in
- GTK_EndProcessDetector(). (KB)
- */
+ delete proc_data;
}
else
{
- // notify user about termination if required
- if (proc_data->process)
- {
- proc_data->process->OnTerminate(proc_data->pid,
- WEXITSTATUS(status));
- }
- // clean up
- if ( proc_data->pid > 0 )
- {
- delete proc_data;
- }
- else
- {
- // wxExecute() will know about it
- proc_data->exitcode = status;
-
- proc_data->pid = 0;
- }
+ // let wxExecute() know that the process has terminated
+ proc_data->pid = 0;
}
}
#endif // wxUSE_GUI
-#if wxUSE_GUI
- #define WXUNUSED_UNLESS_GUI(p) p
-#else
- #define WXUNUSED_UNLESS_GUI(p)
-#endif
+// ----------------------------------------------------------------------------
+// wxStream classes to support IO redirection in wxExecute
+// ----------------------------------------------------------------------------
-// New wxStream classes to clean up the data when the process terminates
+#if wxUSE_STREAMS
-#if wxUSE_GUI
-class wxProcessFileInputStream: public wxInputStream {
- public:
- wxProcessFileInputStream(int fd);
- ~wxProcessFileInputStream();
+class wxProcessFileInputStream : public wxInputStream
+{
+public:
+ wxProcessFileInputStream(int fd) { m_fd = fd; }
+ ~wxProcessFileInputStream() { close(m_fd); }
- protected:
+ virtual bool Eof() const;
+
+protected:
size_t OnSysRead(void *buffer, size_t bufsize);
- protected:
+protected:
int m_fd;
};
-class wxProcessFileOutputStream: public wxOutputStream {
- public:
- wxProcessFileOutputStream(int fd);
- ~wxProcessFileOutputStream();
+class wxProcessFileOutputStream : public wxOutputStream
+{
+public:
+ wxProcessFileOutputStream(int fd) { m_fd = fd; }
+ ~wxProcessFileOutputStream() { close(m_fd); }
- protected:
+protected:
size_t OnSysWrite(const void *buffer, size_t bufsize);
- protected:
+protected:
int m_fd;
};
-wxProcessFileInputStream::wxProcessFileInputStream(int fd)
+bool wxProcessFileInputStream::Eof() const
{
- m_fd = fd;
-}
+ if ( m_lasterror == wxSTREAM_EOF )
+ return TRUE;
-wxProcessFileInputStream::~wxProcessFileInputStream()
-{
- close(m_fd);
+ // check if there is any input available
+ struct timeval tv;
+ tv.tv_sec = 0;
+ tv.tv_usec = 0;
+
+ fd_set readfds;
+ FD_ZERO(&readfds);
+ FD_SET(m_fd, &readfds);
+ switch ( select(m_fd + 1, &readfds, NULL, NULL, &tv) )
+ {
+ case -1:
+ wxLogSysError(_("Impossible to get child process input"));
+ // fall through
+
+ case 0:
+ return TRUE;
+
+ default:
+ wxFAIL_MSG(_T("unexpected select() return value"));
+ // still fall through
+
+ case 1:
+ // input available: check if there is any
+ return wxInputStream::Eof();
+ }
}
size_t wxProcessFileInputStream::OnSysRead(void *buffer, size_t bufsize)
{
- int ret;
+ int ret = read(m_fd, buffer, bufsize);
+ if ( ret == 0 )
+ {
+ m_lasterror = wxSTREAM_EOF;
+ }
+ else if ( ret == -1 )
+ {
+ m_lasterror = wxSTREAM_READ_ERROR;
+ ret = 0;
+ }
+ else
+ {
+ m_lasterror = wxSTREAM_NOERROR;
+ }
+
+ return ret;
+}
- ret = read(m_fd, buffer, bufsize);
- m_lasterror = wxSTREAM_NOERROR;
- if (ret == 0)
- m_lasterror = wxSTREAM_EOF;
- if (ret == -1) {
- m_lasterror = wxSTREAM_READ_ERROR;
- ret = 0;
+size_t wxProcessFileOutputStream::OnSysWrite(const void *buffer, size_t bufsize)
+{
+ int ret = write(m_fd, buffer, bufsize);
+ if ( ret == -1 )
+ {
+ m_lasterror = wxSTREAM_WRITE_ERROR;
+ ret = 0;
+ }
+ else
+ {
+ m_lasterror = wxSTREAM_NOERROR;
}
+
return ret;
}
-wxProcessFileOutputStream::wxProcessFileOutputStream(int fd)
+// ----------------------------------------------------------------------------
+// wxStreamTempBuffer
+// ----------------------------------------------------------------------------
+
+/*
+ Extract of a mail to wx-users to give the context of the problem we are
+ trying to solve here:
+
+ MC> If I run the command:
+ MC> find . -name "*.h" -exec grep linux {} \;
+ MC> in the exec sample synchronously from the 'Capture command output'
+ MC> menu, wxExecute never returns. I have to xkill it. Has anyone
+ MC> else encountered this?
+
+ Yes, I can reproduce it too.
+
+ I even think I understand why it happens: before launching the external
+ command we set up a pipe with a valid file descriptor on the reading side
+ when the output is redirected. So the subprocess happily writes to it ...
+ until the pipe buffer (which is usually quite big on Unix, I think the
+ default is 4Mb) is full. Then the writing process stops and waits until we
+ read some data from the pipe to be able to continue writing to it but we
+ never do it because we wait until it terminates to start reading and so we
+ have a classical deadlock.
+
+ Here is the fix: we now read the output as soon as it appears into a temp
+ buffer (wxStreamTempBuffer object) and later just stuff it back into the
+ stream when the process terminates. See supporting code in wxExecute()
+ itself as well.
+*/
+
+class wxStreamTempBuffer
{
- m_fd = fd;
+public:
+ wxStreamTempBuffer();
+
+ // call to associate a stream with this buffer, otherwise nothing happens
+ // at all
+ void Init(wxInputStream *stream);
+
+ // check for input on our stream and cache it in our buffer if any
+ void Update();
+
+ ~wxStreamTempBuffer();
+
+private:
+ // the stream we're buffering, if NULL we don't do anything at all
+ wxInputStream *m_stream;
+
+ // the buffer of size m_size (NULL if m_size == 0)
+ void *m_buffer;
+
+ // the size of the buffer
+ size_t m_size;
+};
+
+wxStreamTempBuffer::wxStreamTempBuffer()
+{
+ m_stream = NULL;
+ m_buffer = NULL;
+ m_size = 0;
}
-wxProcessFileOutputStream::~wxProcessFileOutputStream()
+void wxStreamTempBuffer::Init(wxInputStream *stream)
{
- close(m_fd);
+ m_stream = stream;
}
-size_t wxProcessFileOutputStream::OnSysWrite(const void *buffer, size_t bufsize)
+void wxStreamTempBuffer::Update()
{
- int ret;
+ if ( m_stream && !m_stream->Eof() )
+ {
+ // realloc in blocks of 1Kb - surely not the best strategy but which
+ // one is?
+ static const size_t incSize = 1024;
+
+ void *buf = realloc(m_buffer, m_size + incSize);
+ if ( !buf )
+ {
+ // don't read any more, we don't have enough memory to do it
+ m_stream = NULL;
+ }
+ else // got memory for the buffer
+ {
+ m_buffer = buf;
+ m_stream->Read((char *)m_buffer + m_size, incSize);
+ m_size += incSize;
+ }
+ }
+}
- ret = write(m_fd, buffer, bufsize);
- m_lasterror = wxSTREAM_NOERROR;
- if (ret == -1) {
- m_lasterror = wxSTREAM_WRITE_ERROR;
- ret = 0;
+wxStreamTempBuffer::~wxStreamTempBuffer()
+{
+ if ( m_buffer )
+ {
+ m_stream->Ungetch(m_buffer, m_size);
+ free(m_buffer);
}
- return ret;
}
-#endif
-
+#endif // wxUSE_STREAMS
+
long wxExecute(wxChar **argv,
bool sync,
- wxProcess * WXUNUSED_UNLESS_GUI(process))
+ wxProcess *process)
{
- wxCHECK_MSG( *argv, 0, wxT("can't exec empty command") );
+ // for the sync execution, we return -1 to indicate failure, but for async
+ // case we return 0 which is never a valid PID
+ //
+ // we define this as a macro, not a variable, to avoid compiler warnings
+ // about "ERROR_RETURN_CODE value may be clobbered by fork()"
+ #define ERROR_RETURN_CODE ((sync) ? -1 : 0)
+
+ wxCHECK_MSG( *argv, ERROR_RETURN_CODE, wxT("can't exec empty command") );
#if wxUSE_UNICODE
int mb_argc = 0;
while (argv[mb_argc])
{
- wxWX2MBbuf mb_arg = wxConvertWX2MB(argv[mb_argc]);
- mb_argv[mb_argc] = strdup(mb_arg);
- mb_argc++;
+ wxWX2MBbuf mb_arg = wxConvertWX2MB(argv[mb_argc]);
+ mb_argv[mb_argc] = strdup(mb_arg);
+ mb_argc++;
}
mb_argv[mb_argc] = (char *) NULL;
#if wxUSE_GUI
// create pipes
int end_proc_detect[2];
- if (pipe(end_proc_detect) == -1)
+ if ( pipe(end_proc_detect) == -1 )
{
wxLogSysError( _("Pipe creation failed") );
+ wxLogError( _("Failed to execute '%s'\n"), *argv );
ARGS_CLEANUP;
- return 0;
+ return ERROR_RETURN_CODE;
}
#endif // wxUSE_GUI
-#if wxUSE_GUI
- int in_pipe[2] = { -1, -1 };
- int out_pipe[2] = { -1, -1 };
- // Only asynchronous mode is interresting
- if (!sync && process && process->NeedPipe())
+ // pipes for inter process communication
+ int pipeIn[2], // stdin
+ pipeOut[2], // stdout
+ pipeErr[2]; // stderr
+
+ pipeIn[0] = pipeIn[1] =
+ pipeOut[0] = pipeOut[1] =
+ pipeErr[0] = pipeErr[1] = -1;
+
+ if ( process && process->IsRedirected() )
{
- if (pipe(in_pipe) == -1 || pipe(out_pipe) == -1)
+ if ( pipe(pipeIn) == -1 || pipe(pipeOut) == -1 || pipe(pipeErr) == -1 )
{
- /* Free fds */
+#if wxUSE_GUI
+ // free previously allocated resources
close(end_proc_detect[0]);
close(end_proc_detect[1]);
- wxLogSysError( _("Pipe creation failed (Console pipes)") );
+#endif // wxUSE_GUI
+
+ wxLogSysError( _("Pipe creation failed") );
+ wxLogError( _("Failed to execute '%s'\n"), *argv );
ARGS_CLEANUP;
- return 0;
+ return ERROR_RETURN_CODE;
}
}
-#endif // wxUSE_GUI
// fork the process
#ifdef HAVE_VFORK
#else
pid_t pid = fork();
#endif
- if (pid == -1)
+
+ if ( pid == -1 ) // error?
{
#if wxUSE_GUI
close(end_proc_detect[0]);
close(end_proc_detect[1]);
- close(in_pipe[0]);
- close(in_pipe[1]);
- close(out_pipe[0]);
- close(out_pipe[1]);
-#endif
+ close(pipeIn[0]);
+ close(pipeIn[1]);
+ close(pipeOut[0]);
+ close(pipeOut[1]);
+ close(pipeErr[0]);
+ close(pipeErr[1]);
+#endif // wxUSE_GUI
+
wxLogSysError( _("Fork failed") );
ARGS_CLEANUP;
- return 0;
+ return ERROR_RETURN_CODE;
}
- else if (pid == 0)
+ else if ( pid == 0 ) // we're in child
{
#if wxUSE_GUI
- // we're in child
close(end_proc_detect[0]); // close reading side
#endif // wxUSE_GUI
- // These three lines close the open file descriptors to to avoid any
+ // These lines close the open file descriptors to to avoid any
// input/output which might block the process or irritate the user. If
- // one wants proper IO for the subprocess, the right thing to do is
- // to start an xterm executing it.
- if (sync == 0)
+ // one wants proper IO for the subprocess, the right thing to do is to
+ // start an xterm executing it.
+ if ( !sync )
{
- // leave stderr opened, it won't do any hurm
for ( int fd = 0; fd < FD_SETSIZE; fd++ )
{
+ if ( fd == pipeIn[0] || fd == pipeOut[1] || fd == pipeErr[1]
#if wxUSE_GUI
- if ( fd == end_proc_detect[1] || fd == in_pipe[0] || fd == out_pipe[1] )
- continue;
+ || fd == end_proc_detect[1]
#endif // wxUSE_GUI
+ )
+ {
+ // don't close this one, we still need it
+ continue;
+ }
+ // leave stderr opened too, it won't do any hurm
if ( fd != STDERR_FILENO )
close(fd);
}
}
- // Fake a console by duplicating pipes
-#if wxUSE_GUI
- if (in_pipe[0] != -1) {
- dup2(in_pipe[0], STDIN_FILENO);
- dup2(out_pipe[1], STDOUT_FILENO);
- close(in_pipe[0]);
- close(out_pipe[1]);
- }
-#endif // wxUSE_GUI
-
-#if 0
- close(STDERR_FILENO);
+ // redirect stdio, stdout and stderr
+ if ( pipeIn[0] != -1 )
+ {
+ if ( dup2(pipeIn[0], STDIN_FILENO) == -1 ||
+ dup2(pipeOut[1], STDOUT_FILENO) == -1 ||
+ dup2(pipeErr[1], STDERR_FILENO) == -1 )
+ {
+ wxLogSysError(_("Failed to redirect child process input/output"));
+ }
- // some programs complain about stderr not being open, so redirect
- // them:
- open("/dev/null", O_RDONLY); // stdin
- open("/dev/null", O_WRONLY); // stdout
- open("/dev/null", O_WRONLY); // stderr
-#endif
+ close(pipeIn[0]);
+ close(pipeOut[1]);
+ close(pipeErr[1]);
+ }
execvp (*mb_argv, mb_argv);
// there is no return after successful exec()
- wxFprintf(stderr, _("Can't execute '%s'\n"), *argv);
-
_exit(-1);
+
+ // some compilers complain about missing return - of course, they
+ // should know that exit() doesn't return but what else can we do if
+ // they don't?
+#if defined(__VMS) || defined(__INTEL_COMPILER)
+ return 0;
+#endif
}
- else
+ else // we're in parent
{
-#if wxUSE_GUI
- wxEndProcessData *data = new wxEndProcessData;
-
ARGS_CLEANUP;
+ // pipe initialization: construction of the wxStreams
+#if wxUSE_STREAMS
+ wxStreamTempBuffer bufIn, bufErr;
+#endif // wxUSE_STREAMS
+
+ if ( process && process->IsRedirected() )
+ {
+#if wxUSE_STREAMS
+ // in/out for subprocess correspond to our out/in
+ wxOutputStream *outStream = new wxProcessFileOutputStream(pipeIn[1]);
+ wxInputStream *inStream = new wxProcessFileInputStream(pipeOut[0]);
+ wxInputStream *errStream = new wxProcessFileInputStream(pipeErr[0]);
+
+ process->SetPipeStreams(inStream, outStream, errStream);
+
+ bufIn.Init(inStream);
+ bufErr.Init(inStream);
+#endif // wxUSE_STREAMS
+
+ close(pipeIn[0]); // close reading side
+ close(pipeOut[1]); // close writing side
+ close(pipeErr[1]); // close writing side
+ }
+
+#if wxUSE_GUI && !defined(__WXMICROWIN__)
+ wxEndProcessData *data = new wxEndProcessData;
+
if ( sync )
{
- wxASSERT_MSG( !process, wxT("wxProcess param ignored for sync exec") );
+ // we may have process for capturing the program output, but it's
+ // not used in wxEndProcessData in the case of sync execution
data->process = NULL;
// sync execution: indicate it by negating the pid
- data->pid = -pid;
- data->tag = wxAddProcessCallback(data, end_proc_detect[0]);
- // we're in parent
+ data->pid = -pid;
+ data->tag = wxAddProcessCallback(data, end_proc_detect[0]);
+
close(end_proc_detect[1]); // close writing side
- // it will be set to 0 from GTK_EndProcessDetector
- while (data->pid != 0)
+ wxBusyCursor bc;
+ wxWindowDisabler wd;
+
+ // data->pid will be set to 0 from GTK_EndProcessDetector when the
+ // process terminates
+ while ( data->pid != 0 )
+ {
+#if wxUSE_STREAMS
+ bufIn.Update();
+ bufErr.Update();
+#endif // wxUSE_STREAMS
+
+ // give GTK+ a chance to call GTK_EndProcessDetector here and
+ // also repaint the GUI
wxYield();
+ }
int exitcode = data->exitcode;
return exitcode;
}
- else
+ else // async execution
{
- // pipe initialization: construction of the wxStreams
- if (process && process->NeedPipe()) {
- // These two streams are relative to this process.
- wxOutputStream *my_output_stream;
- wxInputStream *my_input_stream;
-
- my_output_stream = new wxProcessFileOutputStream(in_pipe[1]);
- my_input_stream = new wxProcessFileInputStream(out_pipe[0]);
- close(in_pipe[0]); // close reading side
- close(out_pipe[1]); // close writing side
-
- process->SetPipeStreams(my_input_stream, my_output_stream);
- }
-
// async execution, nothing special to do - caller will be
// notified about the process termination if process != NULL, data
// will be deleted in GTK_EndProcessDetector
data->process = process;
data->pid = pid;
data->tag = wxAddProcessCallback(data, end_proc_detect[0]);
- // we're in parent
+
close(end_proc_detect[1]); // close writing side
return pid;
return exitcode;
#endif // wxUSE_GUI
}
- return 0;
-
- #undef ARGS_CLEANUP
}
+#undef ERROR_RETURN_CODE
+#undef ARGS_CLEANUP
+
// ----------------------------------------------------------------------------
// file and directory functions
// ----------------------------------------------------------------------------
const wxChar* wxGetHomeDir( wxString *home )
{
*home = wxGetUserHome( wxString() );
+ wxString tmp;
if ( home->IsEmpty() )
*home = wxT("/");
-
+#ifdef __VMS
+ tmp = *home;
+ if ( tmp.Last() != wxT(']'))
+ if ( tmp.Last() != wxT('/')) *home << wxT('/');
+#endif
return home->c_str();
}
if ((who = getpwuid (getuid ())) != NULL)
{
// pw_gecos field in struct passwd is not standard
-#if HAVE_PW_GECOS
+#ifdef HAVE_PW_GECOS
char *comma = strchr(who->pw_gecos, ',');
if (comma)
*comma = '\0'; // cut off non-name comment fields
return FALSE;
}
+#ifndef __WXMAC__
wxString wxGetOsDescription()
{
#ifndef WXWIN_OS_DESCRIPTION
return WXWIN_OS_DESCRIPTION;
#endif
}
+#endif
+
+// this function returns the GUI toolkit version in GUI programs, but OS
+// version in non-GUI ones
+#if !wxUSE_GUI
+
+int wxGetOsVersion(int *majorVsn, int *minorVsn)
+{
+ int major, minor;
+ char name[256];
+
+ if ( sscanf(WXWIN_OS_DESCRIPTION, "%s %d.%d", name, &major, &minor) != 3 )
+ {
+ // unreckognized uname string format
+ major = minor = -1;
+ }
+
+ if ( majorVsn )
+ *majorVsn = major;
+ if ( minorVsn )
+ *minorVsn = minor;
+
+ return wxUNIX;
+}
+
+#endif // !wxUSE_GUI
+
+long wxGetFreeMemory()
+{
+#if defined(__LINUX__)
+ // get it from /proc/meminfo
+ FILE *fp = fopen("/proc/meminfo", "r");
+ if ( fp )
+ {
+ long memFree = -1;
+
+ char buf[1024];
+ if ( fgets(buf, WXSIZEOF(buf), fp) && fgets(buf, WXSIZEOF(buf), fp) )
+ {
+ long memTotal, memUsed;
+ sscanf(buf, "Mem: %ld %ld %ld", &memTotal, &memUsed, &memFree);
+ }
+
+ fclose(fp);
+
+ return memFree;
+ }
+#elif defined(__SUN__) && defined(_SC_AVPHYS_PAGES)
+ return sysconf(_SC_AVPHYS_PAGES)*sysconf(_SC_PAGESIZE);
+//#elif defined(__FREEBSD__) -- might use sysctl() to find it out, probably
+#endif
+
+ // can't find it out
+ return -1;
+}
+
+bool wxGetDiskSpace(const wxString& path, wxLongLong *pTotal, wxLongLong *pFree)
+{
+#if defined(HAVE_STATFS) || defined(HAVE_STATVFS)
+ // the case to "char *" is needed for AIX 4.3
+ struct statfs fs;
+ if ( statfs((char *)path.fn_str(), &fs) != 0 )
+ {
+ wxLogSysError("Failed to get file system statistics");
+
+ return FALSE;
+ }
+
+ // under Solaris we might have to use fs.f_frsize instead as I think it
+ // may be a multiple of the block size in general (TODO)
+
+ if ( pTotal )
+ {
+ *pTotal = wxLongLong(fs.f_blocks) * fs.f_bsize;
+ }
+
+ if ( pFree )
+ {
+ *pFree = wxLongLong(fs.f_bavail) * fs.f_bsize;
+ }
+
+ return TRUE;
+#endif // HAVE_STATFS
+
+ return FALSE;
+}
+
+// ----------------------------------------------------------------------------
+// env vars
+// ----------------------------------------------------------------------------
+
+bool wxGetEnv(const wxString& var, wxString *value)
+{
+ // wxGetenv is defined as getenv()
+ wxChar *p = wxGetenv(var);
+ if ( !p )
+ return FALSE;
+
+ if ( value )
+ {
+ *value = p;
+ }
+
+ return TRUE;
+}
+
+bool wxSetEnv(const wxString& variable, const wxChar *value)
+{
+#if defined(HAVE_SETENV)
+ return setenv(variable.mb_str(),
+ value ? (const char *)wxString(value).mb_str()
+ : NULL,
+ 1 /* overwrite */) == 0;
+#elif defined(HAVE_PUTENV)
+ wxString s = variable;
+ if ( value )
+ s << _T('=') << value;
+
+ // transform to ANSI
+ const char *p = s.mb_str();
+
+ // the string will be free()d by libc
+ char *buf = (char *)malloc(strlen(p) + 1);
+ strcpy(buf, p);
+
+ return putenv(buf) == 0;
+#else // no way to set an env var
+ return FALSE;
+#endif
+}
+
+// ----------------------------------------------------------------------------
+// signal handling
+// ----------------------------------------------------------------------------
+
+#if wxUSE_ON_FATAL_EXCEPTION
+
+#include <signal.h>
+
+extern "C" void wxFatalSignalHandler(wxTYPE_SA_HANDLER)
+{
+ if ( wxTheApp )
+ {
+ // give the user a chance to do something special about this
+ wxTheApp->OnFatalException();
+ }
+
+ abort();
+}
+
+bool wxHandleFatalExceptions(bool doit)
+{
+ // old sig handlers
+ static bool s_savedHandlers = FALSE;
+ static struct sigaction s_handlerFPE,
+ s_handlerILL,
+ s_handlerBUS,
+ s_handlerSEGV;
+
+ bool ok = TRUE;
+ if ( doit && !s_savedHandlers )
+ {
+ // install the signal handler
+ struct sigaction act;
+
+ // some systems extend it with non std fields, so zero everything
+ memset(&act, 0, sizeof(act));
+
+ act.sa_handler = wxFatalSignalHandler;
+ sigemptyset(&act.sa_mask);
+ act.sa_flags = 0;
+
+ ok &= sigaction(SIGFPE, &act, &s_handlerFPE) == 0;
+ ok &= sigaction(SIGILL, &act, &s_handlerILL) == 0;
+ ok &= sigaction(SIGBUS, &act, &s_handlerBUS) == 0;
+ ok &= sigaction(SIGSEGV, &act, &s_handlerSEGV) == 0;
+ if ( !ok )
+ {
+ wxLogDebug(_T("Failed to install our signal handler."));
+ }
+
+ s_savedHandlers = TRUE;
+ }
+ else if ( s_savedHandlers )
+ {
+ // uninstall the signal handler
+ ok &= sigaction(SIGFPE, &s_handlerFPE, NULL) == 0;
+ ok &= sigaction(SIGILL, &s_handlerILL, NULL) == 0;
+ ok &= sigaction(SIGBUS, &s_handlerBUS, NULL) == 0;
+ ok &= sigaction(SIGSEGV, &s_handlerSEGV, NULL) == 0;
+ if ( !ok )
+ {
+ wxLogDebug(_T("Failed to uninstall our signal handler."));
+ }
+
+ s_savedHandlers = FALSE;
+ }
+ //else: nothing to do
+
+ return ok;
+}
+
+#endif // wxUSE_ON_FATAL_EXCEPTION
// ----------------------------------------------------------------------------
// error and debug output routines (deprecated, use wxLog)
// ----------------------------------------------------------------------------
+#if WXWIN_COMPATIBILITY_2_2
+
void wxDebugMsg( const char *format, ... )
{
va_list ap;
exit(3); // the same exit code as for abort()
}
+#endif // WXWIN_COMPATIBILITY_2_2
+
projects / wxWidgets.git / blobdiff