Added wxCriticalSection::TryEnter() method.

[wxWidgets.git] / include / wx / setup_inc.h

diff --git a/include/wx/setup_inc.h b/include/wx/setup_inc.h
index 4f21e8a492bfe5f60c2dff6c0bd0c92b82810891..f7d6ce80b479229bb516d7316d5d12f4a050611a 100644 (file)
--- a/include/wx/setup_inc.h
+++ b/include/wx/setup_inc.h
@@ -56,6 +56,50 @@
 // debugging settings
 // ----------------------------------------------------------------------------
 
 // debugging settings
 // ----------------------------------------------------------------------------
 

+// wxDEBUG_LEVEL will be defined as 1 in wx/debug.h so normally there is no
+// need to define it here. You may do it for two reasons: either completely
+// disable/compile out the asserts in release version (then do it inside #ifdef
+// NDEBUG) or, on the contrary, enable more asserts, including the usually
+// disabled ones, in the debug build (then do it inside #ifndef NDEBUG)
+//
+// #ifdef NDEBUG
+//  #define wxDEBUG_LEVEL 0
+// #else
+//  #define wxDEBUG_LEVEL 2
+// #endif
+
+// wxHandleFatalExceptions() may be used to catch the program faults at run
+// time and, instead of terminating the program with a usual GPF message box,
+// call the user-defined wxApp::OnFatalException() function. If you set
+// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
+//
+// This setting is for Win32 only and can only be enabled if your compiler
+// supports Win32 structured exception handling (currently only VC++ does)
+//
+// Default is 1
+//
+// Recommended setting: 1 if your compiler supports it.
+#define wxUSE_ON_FATAL_EXCEPTION 1
+
+// Set this to 1 to be able to generate a human-readable (unlike
+// machine-readable minidump created by wxCrashReport::Generate()) stack back
+// trace when your program crashes using wxStackWalker
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_STACKWALKER 1
+
+// Set this to 1 to compile in wxDebugReport class which allows you to create
+// and optionally upload to your web site a debug report consisting of back
+// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, it is compiled into a separate library so there
+//                         is no overhead if you don't use it
+#define wxUSE_DEBUGREPORT 1
+

 // Generic comment about debugging settings: they are very useful if you don't
 // use any other memory leak detection tools such as Purify/BoundsChecker, but
 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
 // Generic comment about debugging settings: they are very useful if you don't
 // use any other memory leak detection tools such as Purify/BoundsChecker, but
 // are probably redundant otherwise. Also, Visual C++ CRT has the same features


@@ -63,10 +107,13 @@
 // may prefer to use it instead of built in memory debugging code because it is
 // faster and more fool proof.
 //
 // may prefer to use it instead of built in memory debugging code because it is
 // faster and more fool proof.
 //

-// Using VC++ CRT memory debugging is enabled by default in debug mode
-// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
+// Using VC++ CRT memory debugging is enabled by default in debug build (_DEBUG
+// is defined) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)

 // and if __NO_VC_CRTDBG__ is not defined.
 
 // and if __NO_VC_CRTDBG__ is not defined.
 

+// The rest of the options in this section are obsolete and not supported,
+// enable them at your own risk.
+

 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
 // __WXDEBUG__ is not defined, will still use the normal memory operators.
 //
 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
 // __WXDEBUG__ is not defined, will still use the normal memory operators.
 //


@@ -107,37 +154,6 @@
 // Recommended setting: 0
 #define wxUSE_DEBUG_NEW_ALWAYS 0
 
 // Recommended setting: 0
 #define wxUSE_DEBUG_NEW_ALWAYS 0
 

-// wxHandleFatalExceptions() may be used to catch the program faults at run
-// time and, instead of terminating the program with a usual GPF message box,
-// call the user-defined wxApp::OnFatalException() function. If you set
-// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
-//
-// This setting is for Win32 only and can only be enabled if your compiler
-// supports Win32 structured exception handling (currently only VC++ does)
-//
-// Default is 1
-//
-// Recommended setting: 1 if your compiler supports it.
-#define wxUSE_ON_FATAL_EXCEPTION 1
-
-// Set this to 1 to be able to generate a human-readable (unlike
-// machine-readable minidump created by wxCrashReport::Generate()) stack back
-// trace when your program crashes using wxStackWalker
-//
-// Default is 1 if supported by the compiler.
-//
-// Recommended setting: 1, set to 0 if your programs never crash
-#define wxUSE_STACKWALKER 1
-
-// Set this to 1 to compile in wxDebugReport class which allows you to create
-// and optionally upload to your web site a debug report consisting of back
-// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
-//
-// Default is 1 if supported by the compiler.
-//
-// Recommended setting: 1, it is compiled into a separate library so there
-//                         is no overhead if you don't use it
-#define wxUSE_DEBUGREPORT 1

 
 // ----------------------------------------------------------------------------
 // Unicode support
 
 // ----------------------------------------------------------------------------
 // Unicode support


@@ -181,15 +197,6 @@
 // Recommended setting: 0 (this is still work in progress...)
 #define wxUSE_EXTENDED_RTTI 0
 
 // Recommended setting: 0 (this is still work in progress...)
 #define wxUSE_EXTENDED_RTTI 0
 

-// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
-// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
-// and for wxHashMap to be implemented with templates.
-//
-// Default is 0
-//
-// Recommended setting: YMMV
-#define wxUSE_STL 0
-

 // Support for message/error logging. This includes wxLogXXX() functions and
 // wxLog and derived classes. Don't set this to 0 unless you really know what
 // you are doing.
 // Support for message/error logging. This includes wxLogXXX() functions and
 // wxLog and derived classes. Don't set this to 0 unless you really know what
 // you are doing.


@@ -241,8 +248,38 @@
 // Recommended setting: 1 as setting it to 0 disables many other things
 #define wxUSE_STREAMS       1
 
 // Recommended setting: 1 as setting it to 0 disables many other things
 #define wxUSE_STREAMS       1
 

+// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
+// Note that if the system's implementation does not support positional
+// parameters, setting this to 1 forces the use of the wxWidgets implementation
+// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
+// many Unix systems but usually doesn't under Windows.
+//
+// Positional parameters are very useful when translating a program since using
+// them in formatting strings allow translators to correctly reorder the
+// translated sentences.
+//
+// Default is 1
+//
+// Recommended setting: 1 if you want to support multiple languages
+#define wxUSE_PRINTF_POS_PARAMS      1
+
+
+// ----------------------------------------------------------------------------
+// Interoperability with the standard library.
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_STL to 1 to enable maximal interoperability with the standard
+// library, even at the cost of backwards compatibility.
+//
+// Default is 0
+//
+// Recommended setting: 0 as the options below already provide a relatively
+// good level of interoperability and changing this option arguably isn't worth
+// diverging from the official builds of the library.
+#define wxUSE_STL 0
+

 // This is not a real option but is used as the default value for
 // This is not a real option but is used as the default value for

-// wxUSE_STD_IOSTREAM and wxUSE_STD_STRING.
+// wxUSE_STD_IOSTREAM, wxUSE_STD_STRING and wxUSE_STD_CONTAINERS.

 //
 // Currently the Digital Mars and Watcom compilers come without standard C++
 // library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
 //
 // Currently the Digital Mars and Watcom compilers come without standard C++
 // library headers by default, wxUSE_STD_STRING can be set to 1 if you do have


@@ -257,21 +294,42 @@
     #define wxUSE_STD_DEFAULT  1
 #endif
 
     #define wxUSE_STD_DEFAULT  1
 #endif
 

+// Use standard C++ containers to implement wxVector<>, wxStack<>, wxDList<>
+// and wxHashXXX<> classes. If disabled, wxWidgets own (mostly compatible but
+// usually more limited) implementations are used which allows to avoid the
+// dependency on the C++ run-time library.
+//
+// Notice that the compilers mentioned in wxUSE_STD_DEFAULT comment above don't
+// support using standard containers and that VC6 needs non-default options for
+// such build to avoid getting "fatal error C1076: compiler limit : internal
+// heap limit reached; use /Zm to specify a higher limit" in its own standard
+// headers, so you need to ensure you do increase the heap size before enabling
+// this option for this compiler.
+//
+// Default is 0 for compatibility reasons.
+//
+// Recommended setting: 1 unless compatibility with the official wxWidgets
+// build and/or the existing code is a concern.
+#define wxUSE_STD_CONTAINERS 0
+

 // Use standard C++ streams if 1 instead of wx streams in some places. If
 // Use standard C++ streams if 1 instead of wx streams in some places. If

-// disabled (default), wx streams are used everywhere and wxWidgets doesn't
-// depend on the standard streams library.
+// disabled, wx streams are used everywhere and wxWidgets doesn't depend on the
+// standard streams library.

 //
 // Notice that enabling this does not replace wx streams with std streams
 // everywhere, in a lot of places wx streams are used no matter what.
 //
 //
 // Notice that enabling this does not replace wx streams with std streams
 // everywhere, in a lot of places wx streams are used no matter what.
 //

-// Default is 0
+// Default is 1 if compiler supports it.

 //
 // Recommended setting: 1 if you use the standard streams anyhow and so
 //                      dependency on the standard streams library is not a
 //                      problem
 #define wxUSE_STD_IOSTREAM  wxUSE_STD_DEFAULT
 
 //
 // Recommended setting: 1 if you use the standard streams anyhow and so
 //                      dependency on the standard streams library is not a
 //                      problem
 #define wxUSE_STD_IOSTREAM  wxUSE_STD_DEFAULT
 

-// Enable conversion to standard C++ string if 1.
+// Enable minimal interoperability with the standard C++ string class if 1.
+// "Minimal" means that wxString can be constructed from std::string or
+// std::wstring but can't be implicitly converted to them. You need to enable
+// the option below for the latter.

 //
 // Default is 1 for most compilers.
 //
 //
 // Default is 1 for most compilers.
 //


@@ -279,20 +337,32 @@
 //                      the standard C++ library at all.
 #define wxUSE_STD_STRING  wxUSE_STD_DEFAULT
 
 //                      the standard C++ library at all.
 #define wxUSE_STD_STRING  wxUSE_STD_DEFAULT
 

-// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
-// Note that if the system's implementation does not support positional
-// parameters, setting this to 1 forces the use of the wxWidgets implementation
-// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
-// many Unix systems but usually doesn't under Windows.
+// Make wxString as much interchangeable with std::[w]string as possible, in
+// particular allow implicit conversion of wxString to either of these classes.
+// This comes at a price (or a benefit, depending on your point of view) of not
+// allowing implicit conversion to "const char *" and "const wchar_t *".

 //
 //

-// Positional parameters are very useful when translating a program since using
-// them in formatting strings allow translators to correctly reorder the
-// translated sentences.
+// Because a lot of existing code relies on these conversions, this option is
+// disabled by default but can be enabled for your build if you don't care
+// about compatibility.

 //
 //

-// Default is 1
+// Default is 0 if wxUSE_STL has its default value or 1 if it is enabled.

 //
 //

-// Recommended setting: 1 if you want to support multiple languages
-#define wxUSE_PRINTF_POS_PARAMS      1
+// Recommended setting: 0 to remain compatible with the official builds of
+// wxWidgets.
+#define wxUSE_STD_STRING_CONV_IN_WXSTRING wxUSE_STL
+
+// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
+// them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
+//
+// Note that newer compilers (including VC++ 7.1 and later) don't support
+// wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
+//
+// Default is 0.
+//
+// Recommended setting: 0, only set to 1 if you use a really old compiler
+#define wxUSE_IOSTREAMH     0
+

 
 // ----------------------------------------------------------------------------
 // non GUI features selection
 
 // ----------------------------------------------------------------------------
 // non GUI features selection


@@ -410,6 +480,13 @@
 // Recommended setting: 1 (needed by wxSocket)
 #define wxUSE_STOPWATCH     1
 
 // Recommended setting: 1 (needed by wxSocket)
 #define wxUSE_STOPWATCH     1
 

+// Set wxUSE_FSWATCHER to 1 if you want to enable wxFileSystemWatcher
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_FSWATCHER     1
+

 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
 // which allow the application to store its settings in the persistent
 // storage. Setting this to 1 will also enable on-demand creation of the
 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
 // which allow the application to store its settings in the persistent
 // storage. Setting this to 1 will also enable on-demand creation of the


@@ -550,6 +627,14 @@
 // possible in which case setting this to 0 can gain up to 100KB.
 #define wxUSE_VARIANT 1
 
 // possible in which case setting this to 0 can gain up to 100KB.
 #define wxUSE_VARIANT 1
 

+// Support for wxAny class, the successor for wxVariant.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you want to reduce the library size by a small amount,
+// or your compiler cannot for some reason cope with complexity of templates used.
+#define wxUSE_ANY 1
+

 // Support for regular expression matching via wxRegEx class: enable this to
 // use POSIX regular expressions in your code. You need to compile regex
 // library from src/regex to use it under Windows.
 // Support for regular expression matching via wxRegEx class: enable this to
 // use POSIX regular expressions in your code. You need to compile regex
 // library from src/regex to use it under Windows.


@@ -573,14 +658,6 @@
 // Recommended setting: 1
 #define wxUSE_MEDIACTRL     1
 
 // Recommended setting: 1
 #define wxUSE_MEDIACTRL     1
 

-// Use GStreamer for Unix.
-//
-// Default is 0 as this requires a lot of dependencies which might not be
-// available.
-//
-// Recommended setting: 1 (wxMediaCtrl won't work by default without it)
-#define wxUSE_GSTREAMER    0
-

 // Use wxWidget's XRC XML-based resource system.  Recommended.
 //
 // Default is 1
 // Use wxWidget's XRC XML-based resource system.  Recommended.
 //
 // Default is 1


@@ -603,6 +680,13 @@
 // Recommended setting: 1
 #define wxUSE_AUI       1
 
 // Recommended setting: 1
 #define wxUSE_AUI       1
 

+// Use wxWidget's Ribbon classes for interfaces
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_RIBBON    1
+

 // Use wxPropertyGrid.
 //
 // Default is 1
 // Use wxPropertyGrid.
 //
 // Default is 1


@@ -617,20 +701,84 @@
 // Recommended setting: 1
 #define wxUSE_STC 1
 
 // Recommended setting: 1
 #define wxUSE_STC 1
 

+// Use wxWidget's web viewing classes
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_WEBVIEW 1
+
+// Use the IE wxWebView backend
+//
+// Default is 1 on MSW
+//
+// Recommended setting: 1
+#ifdef __WXMSW__
+#define wxUSE_WEBVIEW_IE 1
+#else
+#define wxUSE_WEBVIEW_IE 0
+#endif
+
+// Use the WebKit wxWebView backend
+//
+// Default is 1 on GTK and OSX
+//
+// Recommended setting: 1
+#if defined(__WXGTK__) || defined(__WXOSX__)
+#define wxUSE_WEBVIEW_WEBKIT 1
+#else
+#define wxUSE_WEBVIEW_WEBKIT 0
+#endif

 
 // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
 // 2D drawing API.  (Still somewhat experimental)
 //
 
 // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
 // 2D drawing API.  (Still somewhat experimental)
 //

-// Please note that on Windows you will need to link with gdiplus.lib (use
-// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
-// application if you want it to be runnable on pre-XP systems.
+// Please note that on Windows gdiplus.dll is loaded dynamically which means
+// that nothing special needs to be done as long as you don't use
+// wxGraphicsContext at all or only use it on XP and later systems but you
+// still do need to distribute it yourself for an application using
+// wxGraphicsContext to be runnable on pre-XP systems.
+//
+// Default is 1 except if you're using a non-Microsoft compiler under Windows
+// as only MSVC7+ is known to ship with gdiplus.h. For other compilers (e.g.
+// mingw32) you may need to install the headers (and just the headers)
+// yourself. If you do, change the setting below manually.
+//
+// Recommended setting: 1 if supported by the compilation environment
+
+// notice that we can't use wxCHECK_VISUALC_VERSION() here as this file is
+// included from wx/platform.h before wxCHECK_VISUALC_VERSION() is defined
+#ifdef _MSC_VER
+#   if _MSC_VER >= 1310
+        // MSVC7.1+ comes with new enough Platform SDK, enable
+        // wxGraphicsContext support for it
+#       define wxUSE_GRAPHICS_CONTEXT 1
+#   else
+        // MSVC 6 didn't include GDI+ headers so disable by default, enable it
+        // here if you use MSVC 6 with a newer SDK
+#       define wxUSE_GRAPHICS_CONTEXT 0
+#   endif
+#else
+    // Disable support for other Windows compilers, enable it if your compiler
+    // comes with new enough SDK or you installed the headers manually.
+    //
+    // Notice that this will be set by configure under non-Windows platforms
+    // anyhow so the value there is not important.
+#   define wxUSE_GRAPHICS_CONTEXT 0
+#endif
+
+// Enable wxGraphicsContext implementation using Cairo library.
+//
+// This is not needed under Windows and detected automatically by configure
+// under other systems, however you may set this to 1 manually if you installed
+// Cairo under Windows yourself and prefer to use it instead the native GDI+
+// implementation.

 //
 // Default is 0
 //
 //
 // Default is 0
 //

-// Recommended setting: 1
-#ifndef wxUSE_GRAPHICS_CONTEXT
-#define wxUSE_GRAPHICS_CONTEXT 0
-#endif
+// Recommended setting: 0
+#define wxUSE_CAIRO 0
+

 
 // ----------------------------------------------------------------------------
 // Individual GUI controls
 
 // ----------------------------------------------------------------------------
 // Individual GUI controls


@@ -644,6 +792,15 @@
 // Recommended setting: 1 (don't change except for very special programs)
 #define wxUSE_CONTROLS     1
 
 // Recommended setting: 1 (don't change except for very special programs)
 #define wxUSE_CONTROLS     1
 

+// Support markup in control labels, i.e. provide wxControl::SetLabelMarkup().
+// Currently markup is supported only by a few controls and only some ports but
+// their number will increase with time.
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be set to 0 if you want to save on code size)
+#define wxUSE_MARKUP       1
+

 // wxPopupWindow class is a top level transient window. It is currently used
 // to implement wxTipWindow
 //
 // wxPopupWindow class is a top level transient window. It is currently used
 // to implement wxTipWindow
 //


@@ -670,6 +827,7 @@
 //
 // Recommended setting: 1
 #define wxUSE_ANIMATIONCTRL 1   // wxAnimationCtrl
 //
 // Recommended setting: 1
 #define wxUSE_ANIMATIONCTRL 1   // wxAnimationCtrl

+#define wxUSE_BANNERWINDOW  1   // wxBannerWindow

 #define wxUSE_BUTTON        1   // wxButton
 #define wxUSE_BMPBUTTON     1   // wxBitmapButton
 #define wxUSE_CALENDARCTRL  1   // wxCalendarCtrl
 #define wxUSE_BUTTON        1   // wxButton
 #define wxUSE_BMPBUTTON     1   // wxBitmapButton
 #define wxUSE_CALENDARCTRL  1   // wxCalendarCtrl


@@ -679,6 +837,7 @@
 #define wxUSE_COLLPANE      1   // wxCollapsiblePane
 #define wxUSE_COLOURPICKERCTRL 1    // wxColourPickerCtrl
 #define wxUSE_COMBOBOX      1   // wxComboBox
 #define wxUSE_COLLPANE      1   // wxCollapsiblePane
 #define wxUSE_COLOURPICKERCTRL 1    // wxColourPickerCtrl
 #define wxUSE_COMBOBOX      1   // wxComboBox

+#define wxUSE_COMMANDLINKBUTTON 1   // wxCommandLinkButton

 #define wxUSE_DATAVIEWCTRL  1   // wxDataViewCtrl
 #define wxUSE_DATEPICKCTRL  1   // wxDatePickerCtrl
 #define wxUSE_DIRPICKERCTRL 1   // wxDirPickerCtrl
 #define wxUSE_DATAVIEWCTRL  1   // wxDataViewCtrl
 #define wxUSE_DATEPICKCTRL  1   // wxDatePickerCtrl
 #define wxUSE_DIRPICKERCTRL 1   // wxDirPickerCtrl


@@ -693,6 +852,7 @@
 #define wxUSE_LISTCTRL      1   // wxListCtrl
 #define wxUSE_RADIOBOX      1   // wxRadioBox
 #define wxUSE_RADIOBTN      1   // wxRadioButton
 #define wxUSE_LISTCTRL      1   // wxListCtrl
 #define wxUSE_RADIOBOX      1   // wxRadioBox
 #define wxUSE_RADIOBTN      1   // wxRadioButton

+#define wxUSE_RICHMSGDLG    1   // wxRichMessageDialog

 #define wxUSE_SCROLLBAR     1   // wxScrollBar
 #define wxUSE_SEARCHCTRL    1   // wxSearchCtrl
 #define wxUSE_SLIDER        1   // wxSlider
 #define wxUSE_SCROLLBAR     1   // wxScrollBar
 #define wxUSE_SEARCHCTRL    1   // wxSearchCtrl
 #define wxUSE_SLIDER        1   // wxSlider


@@ -703,8 +863,10 @@
 #define wxUSE_STATTEXT      1   // wxStaticText
 #define wxUSE_STATBMP       1   // wxStaticBitmap
 #define wxUSE_TEXTCTRL      1   // wxTextCtrl
 #define wxUSE_STATTEXT      1   // wxStaticText
 #define wxUSE_STATBMP       1   // wxStaticBitmap
 #define wxUSE_TEXTCTRL      1   // wxTextCtrl

+#define wxUSE_TIMEPICKCTRL  1   // wxTimePickerCtrl

 #define wxUSE_TOGGLEBTN     1   // requires wxButton
 #define wxUSE_TREECTRL      1   // wxTreeCtrl
 #define wxUSE_TOGGLEBTN     1   // requires wxButton
 #define wxUSE_TREECTRL      1   // wxTreeCtrl

+#define wxUSE_TREELISTCTRL  1   // wxTreeListCtrl

 
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
 
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.


@@ -840,6 +1002,29 @@
 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
 #define wxUSE_ACCEL 1
 
 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
 #define wxUSE_ACCEL 1
 

+// Use the standard art provider. The icons returned by this provider are
+// embedded into the library as XPMs so disabling it reduces the library size
+// somewhat but this should only be done if you use your own custom art
+// provider returning the icons or never use any icons not provided by the
+// native art provider (which might not be implemented at all for some
+// platforms) or by the Tango icons provider (if it's not itself disabled
+// below).
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you use your own custom art provider.
+#define wxUSE_ARTPROVIDER_STD 1
+
+// Use art provider providing Tango icons: this art provider has higher quality
+// icons than the default ones using smaller size XPM icons without
+// transparency but the embedded PNG icons add to the library size.
+//
+// Default is 1 under non-GTK ports. Under wxGTK the native art provider using
+// the GTK+ stock icons replaces it so it is normally not necessary.
+//
+// Recommended setting: 1 but can be turned off to reduce the library size.
+#define wxUSE_ARTPROVIDER_TANGO 1
+

 // Hotkey support (currently Windows only)
 #define wxUSE_HOTKEY 1
 
 // Hotkey support (currently Windows only)
 #define wxUSE_HOTKEY 1
 


@@ -872,6 +1057,14 @@
 // enumerated above, then this class is mostly useless too)
 #define wxUSE_IMAGLIST      1
 
 // enumerated above, then this class is mostly useless too)
 #define wxUSE_IMAGLIST      1
 

+// Use wxInfoBar class.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be disabled without problems as nothing
+// depends on it)
+#define wxUSE_INFOBAR       1
+

 // Use wxMenu, wxMenuBar, wxMenuItem.
 //
 // Default is 1.
 // Use wxMenu, wxMenuBar, wxMenuItem.
 //
 // Default is 1.


@@ -890,6 +1083,14 @@
 // Recommended setting: 1
 #define wxUSE_NOTIFICATION_MESSAGE 1
 
 // Recommended setting: 1
 #define wxUSE_NOTIFICATION_MESSAGE 1
 

+// wxRichToolTip is a customizable tooltip class which has more functionality
+// than the stock (but native, unlike this class) wxToolTip.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be safely set to 0 if you don't need it)
+#define wxUSE_RICHTOOLTIP 1
+

 // Use wxSashWindow class.
 //
 // Default is 1.
 // Use wxSashWindow class.
 //
 // Default is 1.


@@ -1018,6 +1219,13 @@
 //                      use this function
 #define wxUSE_ABOUTDLG 1
 
 //                      use this function
 #define wxUSE_ABOUTDLG 1
 

+// wxFileHistory class
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_FILE_HISTORY 1
+

 // ----------------------------------------------------------------------------
 // Metafiles support
 // ----------------------------------------------------------------------------
 // ----------------------------------------------------------------------------
 // Metafiles support
 // ----------------------------------------------------------------------------


@@ -1074,14 +1282,16 @@
 
 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
 // headers and libraries to be able to compile the library with wxUSE_GLCANVAS
 
 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
 // headers and libraries to be able to compile the library with wxUSE_GLCANVAS

-// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
-// will need to manually add opengl32.lib and glu32.lib to the list of
-// libraries linked with your program if you use OpenGL.
+// set to 1 and, under Windows, also to add opengl32.lib and glu32.lib to the
+// list of libraries used to link your application (although this is done
+// implicitly for Microsoft Visual C++ users).

 //
 //

-// Default is 0.
+// Default is 1 unless the compiler is known to ship without the necessary
+// headers (Digital Mars) or the platform doesn't support OpenGL (Windows CE).

 //
 //

-// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
-#define wxUSE_GLCANVAS       0
+// Recommended setting: 1 if you intend to use OpenGL, can be safely set to 0
+// otherwise.
+#define wxUSE_GLCANVAS       1

 
 // wxRichTextCtrl allows editing of styled text.
 //
 
 // wxRichTextCtrl allows editing of styled text.
 //


@@ -1169,6 +1379,9 @@
 #define wxUSE_MOUSEWHEEL        1
                                 // Include mouse wheel support
 
 #define wxUSE_MOUSEWHEEL        1
                                 // Include mouse wheel support
 

+// Compile wxUIActionSimulator class?
+#define wxUSE_UIACTIONSIMULATOR 1
+

 // ----------------------------------------------------------------------------
 // wxDC classes for various output formats
 // ----------------------------------------------------------------------------
 // ----------------------------------------------------------------------------
 // wxDC classes for various output formats
 // ----------------------------------------------------------------------------


@@ -1183,28 +1396,15 @@
 // to create files in SVG (Scalable Vector Graphics) format.
 #define wxUSE_SVG 1
 
 // to create files in SVG (Scalable Vector Graphics) format.
 #define wxUSE_SVG 1
 

-// ----------------------------------------------------------------------------
-// other compiler (mis)features
-// ----------------------------------------------------------------------------
-
-// Set this to 0 if your compiler can't cope with omission of prototype
-// parameters.
+// Should wxDC provide SetTransformMatrix() and related methods?

 //
 //

-// Default is 1.
-//
-// Recommended setting: 1 (should never need to set this to 0)
-#define REMOVE_UNUSED_ARG   1
-
-// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
-// them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
-//
-// Note that newer compilers (including VC++ 7.1 and later) don't support
-// wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
-//
-// Default is 0.
+// Default is 1 but can be set to 0 if this functionality is not used. Notice
+// that currently only wxMSW supports this so setting this to 0 doesn't change
+// much for non-MSW platforms (although it will still save a few bytes
+// probably).

 //
 //

-// Recommended setting: 0, only set to 1 if you use a really old compiler
-#define wxUSE_IOSTREAMH     0
+// Recommended setting: 1.
+#define wxUSE_DC_TRANSFORM_MATRIX 1

 
 // ----------------------------------------------------------------------------
 // image format support
 
 // ----------------------------------------------------------------------------
 // image format support