+WX_ARG_ENABLE(debug_flag, [ --enable-debug_flag set __WXDEBUG__ flag (recommended for developers!)], wxUSE_DEBUG_FLAG)
+WX_ARG_ENABLE(debug_info, [ --enable-debug_info create code with debugging information], wxUSE_DEBUG_INFO)
+WX_ARG_ENABLE(debug_gdb, [ --enable-debug_gdb create code with extra GDB debugging information], wxUSE_DEBUG_GDB)
+WX_ARG_ENABLE(debug_cntxt, [ --enable-debug_cntxt use wxDebugContext], wxUSE_DEBUG_CONTEXT)
+WX_ARG_ENABLE(mem_tracing, [ --enable-mem_tracing create code with memory tracing], wxUSE_MEM_TRACING)
+WX_ARG_ENABLE(profile, [ --enable-profile create code with profiling information], wxUSE_PROFILE)
+WX_ARG_ENABLE(no_rtti, [ --enable-no_rtti create code without RTTI information], wxUSE_NO_RTTI)
+WX_ARG_ENABLE(no_exceptions, [ --enable-no_exceptions create code without exceptions information], wxUSE_NO_EXCEPTIONS)
+WX_ARG_ENABLE(permissive, [ --enable-permissive compile code disregarding strict ANSI], wxUSE_PERMISSIVE)
+WX_ARG_ENABLE(no_deps, [ --enable-no_deps create code without dependency information], wxUSE_NO_DEPS)
+
+dnl ---------------------------------------------------------------------------
+dnl (small) optional non GUI classes
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(intl, [ --enable-intl use internationalization system], wxUSE_INTL)
+WX_ARG_ENABLE(config, [ --enable-config use wxConfig (and derived) classes], wxUSE_CONFIG)
+
+dnl can't use sockets without GUI so far
+if test "$wxUSE_GUI" = "yes"; then
+WX_ARG_ENABLE(sockets, [ --enable-sockets use socket/network classes], wxUSE_SOCKETS)
+else
+wxUSE_SOCKETS=no
+fi
+
+WX_ARG_ENABLE(dialupman, [ --enable-dialupman use dialup network classes], wxUSE_DIALUP_MANAGER)
+WX_ARG_ENABLE(ipc, [ --enable-ipc use interprocess communication (wxSocket etc.)], wxUSE_IPC)
+WX_ARG_ENABLE(apple_ieee, [ --enable-apple_ieee use the Apple IEEE codec], wxUSE_APPLE_IEEE)
+WX_ARG_ENABLE(timedate, [ --enable-timedate use date/time classes], wxUSE_TIMEDATE)
+WX_ARG_ENABLE(wave, [ --enable-wave use wxWave class], wxUSE_WAVE)
+WX_ARG_ENABLE(fraction, [ --enable-fraction use wxFraction class], wxUSE_FRACTION)
+WX_ARG_ENABLE(dynlib, [ --enable-dynlib use wxLibrary class for DLL loading], wxUSE_DYNLIB_CLASS)
+WX_ARG_ENABLE(longlong, [ --enable-longlong use wxLongLong class], wxUSE_LONGLONG)
+WX_ARG_ENABLE(log, [ --enable-log use logging system], wxUSE_LOG)
+WX_ARG_ENABLE(streams, [ --enable-streams use wxStream etc classes], wxUSE_STREAMS)
+WX_ARG_ENABLE(file, [ --enable-file use wxFile classes], wxUSE_FILE)
+WX_ARG_ENABLE(textfile, [ --enable-textfile use wxTextFile classes], wxUSE_TEXTFILE)
+WX_ARG_ENABLE(unicode, [ --enable-unicode compile wxString with Unicode support], wxUSE_UNICODE)
+WX_ARG_ENABLE(wcsrtombs, [ --enable-wcsrtombs use wcsrtombs instead of buggy (GNU libc1/Linux libc5) wcstombs], wxUSE_WCSRTOMBS)
+WX_ARG_ENABLE(wxprintfv, [ --enable-wxprintfv use wxWindows implementation of vprintf()], wxUSE_EXPERIMENTAL_PRINTF)
+WX_ARG_ENABLE(joystick, [ --enable-joystick compile in joystick support (Linux only)], wxUSE_JOYSTICK)
+WX_ARG_ENABLE(std_iostreams, [ --enable-std_iostreams use standard C++ stream classes], wxUSE_STD_IOSTREAM)
+WX_ARG_ENABLE(fs_inet, [ --enable-fs_inet use virtual HTTP/FTP filesystems], wxUSE_FS_INET)
+WX_ARG_ENABLE(fs_zip, [ --enable-fs_zip use virtual ZIP filesystems], wxUSE_FS_ZIP)
+WX_ARG_ENABLE(zipstream, [ --enable-zipstream use wxZipInputStream], wxUSE_ZIPSTREAM)
+
+dnl ---------------------------------------------------------------------------
+dnl "big" options (i.e. those which change a lot of things throughout the library)
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(threads, [ --enable-threads use threads], wxUSE_THREADS)
+WX_ARG_ENABLE(serial, [ --enable-serial use class serialization], wxUSE_SERIAL)
+
+if test "$wxUSE_GUI" = "yes"; then
+
+dnl ---------------------------------------------------------------------------
+dnl "big" GUI options
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(docview, [ --enable-docview use document view architecture], wxUSE_DOC_VIEW_ARCHITECTURE)
+WX_ARG_ENABLE(help, [ --enable-help use help (using external browser at present)], wxUSE_HELP)
+WX_ARG_ENABLE(constraints, [ --enable-constraints use layout-constraints system], wxUSE_CONSTRAINTS)
+WX_ARG_ENABLE(printarch, [ --enable-printarch use printing architecture], wxUSE_PRINTING_ARCHITECTURE)
+WX_ARG_ENABLE(mdi, [ --enable-mdi use multiple document interface architecture], wxUSE_MDI_ARCHITECTURE)
+
+dnl ---------------------------------------------------------------------------
+dnl PostScript options
+dnl ---------------------------------------------------------------------------
+WX_ARG_ENABLE(postscript, [ --enable-postscript use wxPostscriptDC device context (default for gtk+)], wxUSE_POSTSCRIPT)
+
+dnl VZ: these options seem to be always on, if someone wants to change it please do
+dnl WX_ARG_ENABLE(PS-normalized, [ --enable-PS-normalized use normalized PS fonts], dnl wxUSE_NORMALIZED_PS_FONTS)
+dnl WX_ARG_ENABLE(afmfonts, [ --enable-afmfonts use Adobe Font Metric Font table], dnl wxUSE_AFM_FOR_POSTSCRIPT)
+
+dnl ---------------------------------------------------------------------------
+dnl resources
+dnl ---------------------------------------------------------------------------
+WX_ARG_ENABLE(prologio, [ --enable-prologio use Prolog IO library], wxUSE_PROLOGIO)
+WX_ARG_ENABLE(resources, [ --enable-resources use wxWindows resources], wxUSE_RESOURCES)
+
+WX_ARG_ENABLE(xresources, [ --enable-xresources use X resources for save (default for gtk+)], wxUSE_X_RESOURCES)
+
+dnl ---------------------------------------------------------------------------
+dnl IPC &c
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(clipboard, [ --enable-clipboard use wxClipboard classes], wxUSE_CLIPBOARD)
+WX_ARG_ENABLE(dnd, [ --enable-dnd use Drag'n'Drop classes], wxUSE_DRAG_AND_DROP)
+
+dnl TODO: doesn't work yet
+WX_ARG_ENABLE(wxtree, [ --enable-wxtree make wxTree library], wxUSE_WXTREE)
+
+dnl ---------------------------------------------------------------------------
+dnl optional GUI controls (in alphabetical order except the first one)
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(controls, [ --enable-controls use all usual controls], wxUSE_CONTROLS)
+
+dnl even with --enable-controls, some may be disabled by giving
+dnl --disable-<control> later on the command line - but by default all will be
+dnl used (and vice versa)
+if test "$wxUSE_CONTROLS" = "yes"; then
+ DEFAULT_wxUSE_ACCEL=yes
+ DEFAULT_wxUSE_CARET=yes
+ DEFAULT_wxUSE_COMBOBOX=yes
+ DEFAULT_wxUSE_BMPBUTTON=yes
+ DEFAULT_wxUSE_CHECKBOX=yes
+ DEFAULT_wxUSE_CHECKLISTBOX=yes
+ DEFAULT_wxUSE_CHOICE=yes
+ DEFAULT_wxUSE_GAUGE=yes
+ DEFAULT_wxUSE_GRID=yes
+ DEFAULT_wxUSE_NEW_GRID=no
+ DEFAULT_wxUSE_IMAGLIST=yes
+ DEFAULT_wxUSE_LISTBOX=yes
+ DEFAULT_wxUSE_LISTCTRL=yes
+ DEFAULT_wxUSE_NOTEBOOK=yes
+ DEFAULT_wxUSE_RADIOBOX=yes
+ DEFAULT_wxUSE_RADIOBTN=yes
+ DEFAULT_wxUSE_SASH=yes
+ DEFAULT_wxUSE_SCROLLBAR=yes
+ DEFAULT_wxUSE_SLIDER=yes
+ DEFAULT_wxUSE_SPINBTN=yes
+ DEFAULT_wxUSE_SPINCTRL=yes
+ DEFAULT_wxUSE_SPLITTER=yes
+ DEFAULT_wxUSE_STATBMP=yes
+ DEFAULT_wxUSE_STATBOX=yes
+ DEFAULT_wxUSE_STATLINE=yes
+ DEFAULT_wxUSE_STATUSBAR=yes
+ DEFAULT_wxUSE_TAB_DIALOG=yes
+ DEFAULT_wxUSE_TOOLBAR=yes
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
+ DEFAULT_wxUSE_TOOLTIPS=yes
+ DEFAULT_wxUSE_TREECTRL=yes
+elif test "$wxUSE_CONTROLS" = "no"; then
+ DEFAULT_wxUSE_ACCEL=no
+ DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_CHECKBOX=no
+ DEFAULT_wxUSE_CHECKLISTBOX=no
+ DEFAULT_wxUSE_CHOICE=no
+ DEFAULT_wxUSE_GAUGE=no
+ DEFAULT_wxUSE_GRID=no
+ DEFAULT_wxUSE_NEW_GRID=no
+ DEFAULT_wxUSE_IMAGLIST=no
+ DEFAULT_wxUSE_LISTBOX=no
+ DEFAULT_wxUSE_LISTCTRL=no
+ DEFAULT_wxUSE_NOTEBOOK=no
+ DEFAULT_wxUSE_RADIOBOX=no
+ DEFAULT_wxUSE_RADIOBTN=no
+ DEFAULT_wxUSE_SASH=no
+ DEFAULT_wxUSE_SCROLLBAR=no
+ DEFAULT_wxUSE_SLIDER=no
+ DEFAULT_wxUSE_SPINBTN=no
+ DEFAULT_wxUSE_SPINCTRL=no
+ DEFAULT_wxUSE_SPLITTER=no
+ DEFAULT_wxUSE_STATBMP=no
+ DEFAULT_wxUSE_STATBOX=no
+ DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATUSBAR=no
+ DEFAULT_wxUSE_TAB_DIALOG=no
+ DEFAULT_wxUSE_TOOLBAR=no
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=no
+ DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
+ DEFAULT_wxUSE_TOOLTIPS=no
+ DEFAULT_wxUSE_TREECTRL=no
+fi
+
+WX_ARG_ENABLE(accel, [ --enable-accel use accelerators], wxUSE_ACCEL)
+WX_ARG_ENABLE(caret, [ --enable-caret use wxCaret class], wxUSE_CARET)
+WX_ARG_ENABLE(bmpbutton, [ --enable-bmpbutton use wxBitmapButton class], wxUSE_BMPBUTTON)
+WX_ARG_ENABLE(checkbox, [ --enable-checkbox use wxCheckBox class], wxUSE_CHECKBOX)
+WX_ARG_ENABLE(checklst, [ --enable-checklst use wxCheckListBox (listbox with checkboxes) class], wxUSE_CHECKLST)
+WX_ARG_ENABLE(choice, [ --enable-choice use wxChoice class], wxUSE_CHOICE)
+WX_ARG_ENABLE(combobox, [ --enable-combobox use wxComboBox classes], wxUSE_COMBOBOX)
+WX_ARG_ENABLE(gauge, [ --enable-gauge use wxGauge class], wxUSE_GAUGE)
+WX_ARG_ENABLE(grid, [ --enable-grid use wxGrid class], wxUSE_GRID)
+WX_ARG_ENABLE(newgrid, [ --enable-newgrid use new wxGrid class], wxUSE_NEW_GRID)
+WX_ARG_ENABLE(imaglist, [ --enable-imaglist use wxImageList class], wxUSE_IMAGLIST)
+WX_ARG_ENABLE(listbox, [ --enable-listbox use wxListBox class], wxUSE_LISTBOX)
+WX_ARG_ENABLE(listctrl, [ --enable-listctrl use wxListCtrl class], wxUSE_LISTCTRL)
+WX_ARG_ENABLE(notebook, [ --enable-notebook use wxNotebook class], wxUSE_NOTEBOOK)
+WX_ARG_ENABLE(radiobox, [ --enable-radiobox use wxRadioBox class], wxUSE_RADIOBOX)
+WX_ARG_ENABLE(radiobtn, [ --enable-radiobtn use wxRadioButton class], wxUSE_RADIOBTN)
+WX_ARG_ENABLE(sash, [ --enable-sash use wxSashWindow class], wxUSE_SASH)
+WX_ARG_ENABLE(scrollbar, [ --enable-scrollbar use wxScrollBar class and scrollable windows], wxUSE_SCROLLBAR)
+WX_ARG_ENABLE(slider, [ --enable-slider use wxSlider class], wxUSE_SLIDER)
+WX_ARG_ENABLE(spinbtn, [ --enable-spinbtn use wxSpinButton class], wxUSE_SPINBTN)
+WX_ARG_ENABLE(spinctrl, [ --enable-spinctrl use wxSpinCtrl class], wxUSE_SPINCTRL)
+WX_ARG_ENABLE(splitter, [ --enable-splitter use wxSplitterWindow class], wxUSE_SPLITTER)
+WX_ARG_ENABLE(statbmp, [ --enable-statbmp use wxStaticBitmap class], wxUSE_STATBMP)
+WX_ARG_ENABLE(statbox, [ --enable-statbox use wxStaticBox class], wxUSE_STATBOX)
+WX_ARG_ENABLE(statline, [ --enable-statline use wxStaticLine class], wxUSE_STATLINE)
+WX_ARG_ENABLE(statusbar, [ --enable-statusbar use wxStatusBar class], wxUSE_STATUSBAR)
+WX_ARG_ENABLE(tabdialog, [ --enable-tabdialog use wxTabControl class], wxUSE_TABDIALOG)
+WX_ARG_ENABLE(toolbar, [ --enable-toolbar use wxToolBar class], wxUSE_TOOLBAR)
+WX_ARG_ENABLE(tbarnative, [ --enable-tbarnative use native wxToolBar class], wxUSE_TOOLBAR_NATIVE)
+WX_ARG_ENABLE(tbarsmpl, [ --enable-tbarsmpl use wxToolBarSimple class], wxUSE_TOOLBAR_SIMPLE)
+WX_ARG_ENABLE(treectrl, [ --enable-treectrl use wxTreeCtrl class], wxUSE_TREECTRL)
+
+dnl ---------------------------------------------------------------------------
+dnl misc GUI options
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(commondlg, [ --enable-commondlg use common dialogs (wxDirDialog, wxProgressDialog, wxTextDialog, ...)], wxUSE_COMMONDLGS)
+WX_ARG_ENABLE(dirdlg, [ --enable-dirdlg use wxDirDialog], wxUSE_DIRDLG)
+WX_ARG_ENABLE(textdlg, [ --enable-textdlg use wxTextDialog], wxUSE_TEXTDLG)
+WX_ARG_ENABLE(tipdlg, [ --enable-tipdlg use startup tips], wxUSE_STARTUP_TIPS)
+WX_ARG_ENABLE(progressdlg, [ --enable-progressdlg use wxProgressDialog], wxUSE_PROGRESSDLG)
+WX_ARG_ENABLE(miniframe, [ --enable-miniframe use wxMiniFrame class], wxUSE_MINIFRAME)
+WX_ARG_ENABLE(html, [ --enable-html use wxHTML sub-library], wxUSE_HTML)
+WX_ARG_ENABLE(tooltips, [ --enable-tooltips use wxToolTip class], wxUSE_TOOLTIPS)
+WX_ARG_ENABLE(splines, [ --enable-splines use spline drawing code], wxUSE_SPLINES)
+WX_ARG_ENABLE(validators, [ --enable-validators use wxValidator and derived classes], wxUSE_VALIDATORS)
+WX_ARG_ENABLE(busyinfo, [ --enable-busyinfo use wxBusyInfo], wxUSE_BUSYINFO)
+
+dnl ---------------------------------------------------------------------------
+dnl support for image formats that do not rely on external library
+dnl ---------------------------------------------------------------------------
+
+WX_ARG_ENABLE(gif, [ --enable-gif use gif images (GIF file format)], wxUSE_GIF)
+WX_ARG_ENABLE(pcx, [ --enable-pcx use pcx images (PCX file format)], wxUSE_PCX)
+WX_ARG_ENABLE(pnm, [ --enable-pnm use pnm images (PNM file format)], wxUSE_PNM)
+
+fi
+dnl for GUI only
+
+dnl cache the options values before (may be) aborting below
+WX_ARG_CACHE_FLUSH
+
+dnl check that no more than one toolkit is given and that if none are given that
+dnl we have a default one
+
+AC_MSG_CHECKING(for toolkit)
+
+if test "$wxUSE_GUI" = "yes"; then
+
+if test "$USE_BEOS" = 1; then
+ AC_MSG_ERROR([BeOS GUI is not supported yet, use --disable-gui])
+fi
+
+if test "$TOOLKIT_GIVEN" = 1; then
+ dnl convert "yes" to 1 and "no" to 0
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ eval "$var=`echo \$value | sed -e "s/yes/1/" -e "s/no/0/"`"
+ done
+else
+ dnl try to guess the most apropriate toolkit for this platform
+ for toolkit in `echo $ALL_TOOLKITS`; do
+ if test "$has_toolkit_in_cache" != 1; then
+ var=DEFAULT_DEFAULT_wxUSE_$toolkit
+ else
+ var=DEFAULT_wxUSE_$toolkit
+ fi
+ eval "wxUSE_$toolkit=\$${var}"
+ done
+fi
+
+dnl we suppose that expr exists...
+NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_WINE:-0} + ${wxUSE_MINGW:-0} + ${wxUSE_CYGWIN:-0}`
+
+dnl Allow wxUSE_PM only for OS/2 with EMX.
+dnl Path separator; ':' for unix.
+dnl Stem for flex output; lexyy for OS/2, lex.yy otherwise
+dnl Extension for programs; '.exe' for OS/2 and msw builds (set later).
+case "${host}" in
+ *-pc-os2_emx )
+ NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
+ # PATH_IFS is autodetected by OS/2's configure (usually ';')
+ LEX_STEM="lexyy"
+ ;;
+ *)
+ PATH_IFS=':'
+ LEX_STEM="lex.yy"
+ PROGRAM_EXT=
+ ;;
+esac
+
+case "$NUM_TOOLKITS" in
+ 1)
+ ;;
+ 0)
+ AC_MSG_ERROR(Please specify a toolkit - cannot determine the default for ${host})
+ ;;
+ *)
+ AC_MSG_ERROR(Please specify at most one toolkit (may be some are cached?))
+esac
+
+dnl cache the wxUSE_<TOOLKIT> values too
+for toolkit in `echo $ALL_TOOLKITS`; do
+ var=wxUSE_$toolkit
+ eval "value=\$${var}"
+ if test "x$value" != x; then
+ cache_var=CACHE_$toolkit
+ eval "cache=\$${cache_var}"
+ if test "$cache" = 1; then
+ echo "$var=$value" >> ${wx_arg_cache_file}
+ fi
+ if test "$value" = 1; then
+ AC_MSG_RESULT(`echo $toolkit | tr [[A-Z]] [[a-z]]`)
+ fi
+ fi
+done
+
+dnl from "if wxUSE_GUI"
+else
+ PATH_IFS=':'
+ AC_MSG_RESULT(base only)
+fi
+
+dnl ---------------------------------------------------------------------------
+dnl Checks for programs
+dnl ---------------------------------------------------------------------------
+
+dnl flush the cache because checking for programs might abort
+AC_CACHE_SAVE
+
+dnl cross-compiling support: we're cross compiling if the build system is
+dnl different from the target one (assume host and target be always the same)
+if eval "test $host != $build"; then
+ if eval "test $host_alias != NONE"; then
+ CC=$host_alias-gcc
+ CXX=$host_alias-c++
+ AR=$host_alias-ar
+ RANLIB=$host_alias-ranlib
+ DLLTOOL=$host_alias-dlltool
+ LD=$host_alias-ld
+ NM=$host_alias-nm
+ STRIP=$host_alias-strip
+ fi
+fi
+
+dnl C-compiler checks
+dnl defines CC with the compiler to use
+dnl defines GCC with yes if using gcc
+dnl defines GCC empty if not using gcc
+dnl defines CFLAGS
+AC_PROG_CC
+
+CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'`
+
+dnl what is the c-preprocessor
+dnl defines CPP with the c-preprocessor
+AC_PROG_CPP
+
+dnl is -traditional needed for correct compilations
+dnl adds -traditional for gcc if needed
+AC_PROG_GCC_TRADITIONAL
+
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+
+dnl C++-compiler checks
+dnl defines CXX with the compiler to use
+dnl defines GXX with yes if using gxx
+dnl defines GXX empty if not using gxx
+dnl defines CXXFLAGS
+AC_PROG_CXX
+
+dnl what is the C++-preprocessor
+dnl defines CXXCPP with the C++-preprocessor
+AC_PROG_CXXCPP
+
+CXXFLAGS=`echo "$CXXFLAGS" | sed 's/-g//g'`
+
+AC_LANG_RESTORE
+
+dnl ranlib command
+dnl defines RANLIB with the appropriate command
+AC_PROG_RANLIB
+
+dnl ar command
+dnl defines AR with the appropriate command
+AC_CHECK_PROG(AR, ar, ar, ar)
+
+dnl install checks
+dnl defines INSTALL with the appropriate command
+AC_PROG_INSTALL
+
+dnl strip command
+dnl defines STRIP as strip or nothing if not found
+AC_CHECK_PROG(STRIP, strip, strip, true)
+
+dnl check if VPATH works
+AC_MSG_CHECKING("make for VPATH support")
+dnl create Makefile
+cat - << EOF > confMake
+check : file
+ cp \$? \$@
+ cp \$? final_file
+EOF
+
+if test ! -d sub ; then
+ mkdir sub
+fi
+echo dummy > sub/file
+${MAKE-make} -f confMake VPATH=sub 2> config.log > /dev/null
+RESULT=$?
+rm -f sub/file check final_file confMake
+rmdir sub
+if test "$RESULT" = 0; then
+ AC_MSG_RESULT(yes)
+else
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(
+You need a make-utility that is able to use the variable
+VPATH correctly.
+If your version of make does not support VPATH correctly,
+please install GNU-make (possibly as gmake), and start
+configure with the following command:
+export MAKE=gmake; ./configure for sh-type shells
+setenv MAKE gmake; ./configure for csh-type shells
+Also please do remember to use gmake in this case every time
+you are trying to compile.
+)
+fi
+
+dnl YACC checks
+dnl defines YACC with the appropriate command
+AC_PROG_YACC
+
+dnl LEX checks
+dnl defines LEX with the appropriate command
+dnl defines LEXLIB with the appropriate library
+AC_PROG_LEX
+
+dnl needed for making link to setup.h
+AC_PROG_LN_S
+
+dnl ---------------------------------------------------------------------------
+dnl Define search path for includes and libraries: all headers and libs will be
+dnl looked for in all directories of this path
+dnl ---------------------------------------------------------------------------
+
+dnl notice that /usr/include should not be in this list, otherwise it breaks
+dnl compilation on Solaris/gcc because standard headers are included instead
+dnl of the gcc ones (correction: it *is* needed for broken AIX compiler - but
+dnl do put it last!)
+dnl
+dnl Also try to put all directories which may contain X11R6 before those which
+dnl may contain X11R5/4 - we want to use R6 on machines which have both!
+SEARCH_INCLUDE="\
+ /usr/local/include \
+ \
+ /usr/Motif-1.2/include \
+ /usr/Motif-2.1/include \
+ \
+ /usr/include/Motif1.2 \
+ /opt/xpm/include/X11 \
+ /opt/GBxpm/include/ \
+ /opt/GBxpm/X11/include/ \
+ \
+ /usr/Motif1.2/include \
+ /usr/dt/include \
+ /usr/openwin/include \
+ \
+ /usr/include/Xm \
+ \
+ /usr/X11R6/include \
+ /usr/X11R6.4/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X11/include \
+ /usr/include/X11 \
+ /usr/local/X11/include \
+ /usr/local/include/X11 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ X:/XFree86/include \
+ X:/XFree86/include/X11 \
+ \
+ /usr/include/gtk \
+ /usr/local/include/gtk \
+ /usr/include/glib \
+ /usr/local/include/glib \
+ \
+ /usr/include/qt \
+ /usr/local/include/qt \
+ \
+ /usr/include/windows \
+ /usr/include/wine \
+ /usr/local/include/wine \
+ \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/share/include \
+ \
+ /usr/include"
+
+SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` "
+
+dnl ------------------------------------------------------------------------
+dnl Check for libraries
+dnl ------------------------------------------------------------------------
+
+dnl flush the cache because checking for libraries below might abort
+AC_CACHE_SAVE
+
+dnl ----------------------------------------------------------------
+dnl search for toolkit (widget sets)
+dnl ----------------------------------------------------------------
+
+AFMINSTALL=
+
+if test "$wxUSE_GUI" = "yes"; then
+
+USE_GUI=1
+
+TOOLKIT=
+TOOLKIT_INCLUDE=
+
+GUIOBJS=
+COMMONOBJS=
+GENERICOBJS=
+
+GUI_TK_LIBRARY=
+GUI_TK_LINK=
+
+WXGTK12=
+WXGTK13=
+
+WXWINE=
+
+if test "$wxUSE_CYGWIN" = 1 || test "$wxUSE_MINGW" = 1 ; then
+ if test "$cross_compiling" = "yes" ; then
+ AC_MSG_WARN(Cross compiling --- skipping windows.h check)
+ else
+ AC_MSG_CHECKING(for Windows headers)
+ WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, windows.h)
+ if test "$ac_find_includes" != "" ; then
+ AC_MSG_RESULT(found $ac_find_includes)
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
+ else
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(please set CFLAGS to contain the location of windows.h)
+ fi
+ fi
+
+ INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS msw"
+ dnl --- Quick & Dirty ; link against most/all libraries
+ dnl --- This will bloat the executable, but it'll work for now...
+ LIBS="$LIBS -lkernel32 -luser32 -lgdi32 -lcomdlg32 -lwinspool -lwinmm -lshell32 -lcomctl32 -lctl3d32 -lcrtdll -ladvapi32 -lwsock32"
+
+ dnl -mwindows is needed to avoid that spawning of a console window
+ if test "$wxUSE_MINGW" = 1; then
+ LDFLAGS="$LDFLAGS -mwindows"
+ fi
+
+ TOOLKIT=MSW
+
+ GUIOBJS="\$(MSW_GUIOBJS)"
+ GUIHEADERS="\$(MSW_HEADERS)"
+ COMMONOBJS="\$(MSW_COMMONOBJS)"
+ GENERICOBJS="\$(MSW_GENERICOBJS)"
+ UNIXOBJS=
+ GUIDIST=MSW_DIST
+fi
+
+if test "$wxUSE_GTK" = 1; then
+ dnl avoid calling AM_PATH_GTK twice, so check first for the newer version
+ dnl and only then, if it wasn't found, for an older one
+ AM_PATH_GTK(1.2.3, WXGTK12=1)
+
+ if test "$WXGTK12" != 1; then
+ AC_MSG_ERROR([
+ Please check that gtk-config is in path, the directory
+ where GTK+ libraries are installed (returned by
+ 'gtk-config --libs' command) is in LD_LIBRARY_PATH or
+ equivalent variable and GTK+ is version 1.2.3 or above.
+ ])
+ fi
+
+dnl it doesn't really work with 1.3.0 now...
+dnl AM_PATH_GTK(1.3.0,
+dnl WXGTK13=1,
+dnl AM_PATH_GTK(1.2.1,
+dnl WXGTK12=1,
+dnl AC_MSG_ERROR(Is gtk-config in path and GTK+ is version 1.2.1 or above?)
+dnl )
+dnl )
+
+ TOOLKIT_INCLUDE="$GTK_CFLAGS"
+
+dnl Appending gthreads as it was done here is not portable, instead
+dnl we now call "gtk-config --libs gthread" which sets the right library
+dnl name for us. The following hacks are no longer required.
+
+ GUI_TK_LIBRARY="$GTK_LIBS"
+
+dnl dnl On FreeBSD, the libs are called gtk12 etc, so we must append gthread12
+dnl echo $GTK_LIBS | fgrep -q "glib12"
+dnl if test $? = 0 ; then
+dnl GUI_TK_LIBRARY="$GTK_LIBS -gthread12"
+dnl else
+dnl GUI_TK_LIBRARY="$GTK_LIBS -lgthread"
+dnl fi
+ TOOLKIT=GTK
+
+ AFMINSTALL=afminstall
+
+ GUIOBJS="\$(GTK_GUIOBJS)"
+ GUIHEADERS="\$(GTK_HEADERS)"
+ COMMONOBJS="\$(GTK_COMMONOBJS)"
+ GENERICOBJS="\$(GTK_GENERICOBJS)"
+ GUIDEPS="\$(GTK_GUIDEPS)"
+ COMMONDEPS="\$(GTK_COMMONDEPS)"
+ GENERICDEPS="\$(GTK_GENERICDEPS)"
+ UNIXOBJS="\$(UNIX_OBJS)"
+ UNIXDEPS="\$(UNIX_DEPS)"
+ GUIDIST=GTK_DIST
+
+ dnl test for XIM support in libgdk
+ AC_CHECK_LIB(gdk, gdk_im_open, AC_DEFINE(HAVE_XIM))
+fi
+
+if test "$wxUSE_WINE" = 1; then
+ AC_MSG_CHECKING(for WINE includes)
+ WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, windows.h)
+ if test "$ac_find_includes" != "" ; then
+ AC_MSG_RESULT(found $ac_find_includes)
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
+ else
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(please set CFLAGS to contain the location of windows.h)
+ fi
+
+ XPM_LINK=""
+ AC_MSG_CHECKING(for Xpm library)
+ WX_PATH_FIND_LIBRARIES($SEARCH_LIB,Xpm)
+ if test "$ac_find_libraries" != "" ; then
+ GUI_TK_LIBRARY="-L$ac_find_libraries"
+ XPM_LINK="-lXpm"
+ AC_DEFINE(wxHAVE_LIB_XPM)
+ AC_MSG_RESULT(found at $ac_find_libraries)
+ else
+ AC_MSG_RESULT(no)
+ AC_MSG_WARN(library will be compiled without support for images in XPM format)
+ fi
+
+ MESA_LINK=""
+ AC_MSG_CHECKING(for Mesa library)
+ WX_PATH_FIND_LIBRARIES($SEARCH_LIB,MesaGL)
+ if test "$ac_find_libraries" != "" ; then
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY -L$ac_find_libraries"
+ MESA_LINK="-lMesaGL"
+ AC_MSG_RESULT(found at $ac_find_libraries)
+ else
+ AC_MSG_ERROR(no)
+ fi
+
+ GUI_TK_LINK="-lwine $MESA_LINK $XPM_LINK -lXxf86dga -lXxf86vm -lSM -lICE -lXext -lXmu -lX11 -lncurses -lm"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
+ WXWINE=1
+ TOOLKIT=MSW
+
+ GUIHEADERS="\$(MSW_HEADERS)"
+ GUIOBJS="\$(MSW_GUIOBJS)"
+ COMMONOBJS="\$(MSW_COMMONOBJS)"
+ GENERICOBJS="\$(MSW_GENERICOBJS)"
+ GUIDEPS="\$(MSW_GUIDEPS)"
+ COMMONDEPS="\$(MSW_COMMONDEPS)"
+ GENERICDEPS="\$(MSW_GENERICDEPS)"
+ UNIXOBJS="\$(UNIX_OBJS)"
+ UNIXDEPS="\$(UNIX_DEPS)"
+ GUIDIST=MSW_DIST
+fi
+
+if test "$wxUSE_MOTIF" = 1; then
+ dnl use standard macros to check for X headers/libs, this brings support
+ dnl for the standard configure options --x-includes and --x-libraries
+ AC_PATH_XTRA
+
+ if test "$no_x" = "yes"; then
+ AC_MSG_ERROR(X11 not found, please use --x-includes and/or --x-libraries options)
+ fi
+
+ GUI_TK_LIBRARY="$X_LIBS"
+ TOOLKIT_INCLUDE="$X_CFLAGS"
+
+ AFMINSTALL=afminstall
+
+ dnl manual check for X11 headers/libs
+ dnl
+ dnl AC_MSG_CHECKING(for X11 headers)
+ dnl WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, X11/Intrinsic.h)
+ dnl if test "$ac_find_includes" != "" ; then
+ dnl AC_MSG_RESULT(found $ac_find_includes)
+ dnl else
+ dnl AC_MSG_RESULT(no)
+ dnl AC_MSG_ERROR(please set CFLAGS to contain the location of X11/Intrinsic.h)
+ dnl fi
+ dnl
+ dnl AC_MSG_CHECKING(for X11 libraries)
+ dnl WX_PATH_FIND_LIBRARIES($SEARCH_LIB, X11)
+ dnl if test "$ac_find_libraries" != "" ; then
+ dnl WX_INCLUDE_PATH_EXIST($ac_find_includes, $TOOLKIT_INCLUDE)
+ dnl WX_LINK_PATH_EXIST($ac_find_libraries, $GUI_TK_LIBRARY)
+ dnl
+ dnl GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ dnl TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE $ac_path_to_include"
+ dnl AC_MSG_RESULT(found at $ac_find_libraries)
+ dnl else
+ dnl AC_MSG_RESULT(no)
+ dnl AC_MSG_ERROR(please set LDFLAGS to contain the location of libX11)
+ dnl fi
+
+ COMPILED_X_PROGRAM=0
+
+ AC_MSG_CHECKING(for Motif/Lesstif headers)
+ WX_PATH_FIND_INCLUDES($SEARCH_INCLUDE, Xm/Xm.h)
+ if test "$ac_find_includes" != "" ; then
+ AC_MSG_RESULT(found $ac_find_includes)
+ else
+ AC_TRY_COMPILE(
+ [
+ #include <Xm/Xm.h>
+ ],
+ [
+ int version;
+
+ version = xmUseVersion;
+ ],
+ [
+ AC_MSG_RESULT(found in default search path)
+ COMPILED_X_PROGRAM=1
+ ],
+ [
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(please set CFLAGS to contain the location of Xm/Xm.h)
+ ]
+ )
+ fi
+
+ if test "$COMPILED_X_PROGRAM" = 0; then
+ AC_MSG_CHECKING(for Motif/Lesstif library)
+ WX_PATH_FIND_LIBRARIES($SEARCH_LIB, Xm)
+ if test "$ac_find_libraries" != "" ; then
+ WX_INCLUDE_PATH_EXIST($ac_find_includes, $TOOLKIT_INCLUDE)
+ WX_LINK_PATH_EXIST($ac_find_libraries, $GUI_TK_LIBRARY)
+
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE $ac_path_to_include"
+ AC_MSG_RESULT(found at $ac_find_libraries)
+ else
+ dnl it might happen that we found headers in one of the standard
+ dnl paths but the libs are elsewhere - we do need to try to
+ dnl compile a sample program then here
+ AC_TRY_COMPILE(
+ [
+ #include <Xm/Xm.h>
+ ],
+ [
+ int version;
+
+ version = xmUseVersion;
+ ],
+ [
+ AC_MSG_RESULT(found in default search path)
+ COMPILED_X_PROGRAM=1
+ ],
+ [
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(please set LDFLAGS to contain the location of libXm)
+ ]
+ )
+ fi
+ fi
+
+ dnl we don't need this as we used AC_PATH_XTRA above which does it for us
+ dnl
+ dnl dnl if we already compiled a sample program, X libs are surely there
+ dnl if test "$COMPILED_X_PROGRAM" = 0; then
+ dnl AC_MSG_CHECKING(for Xt library)
+ dnl WX_PATH_FIND_LIBRARIES($SEARCH_LIB,Xt)
+ dnl if test "$ac_find_libraries" != "" ; then
+ dnl WX_LINK_PATH_EXIST($ac_find_libraries,$GUI_TK_LIBRARY)
+ dnl GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ dnl AC_MSG_RESULT(found at $ac_find_libraries)
+ dnl else
+ dnl AC_TRY_COMPILE
+ dnl (
+ dnl [
+ dnl #include <X11/Intrinsic.h>
+ dnl ],
+ dnl [
+ dnl char *p;
+ dnl p = XtMalloc(5);
+ dnl ],
+ dnl [
+ dnl AC_MSG_RESULT(found in default search path)
+ dnl COMPILED_X_PROGRAM=1
+ dnl ],
+ dnl [
+ dnl AC_MSG_RESULT(no)
+ dnl AC_MSG_ERROR(please set LDFLAGS to contain the location of libXt)
+ dnl ]
+ dnl )
+ dnl fi
+ dnl fi
+
+ XPM_LINK=""
+ AC_MSG_CHECKING(for Xpm library)
+ WX_PATH_FIND_LIBRARIES($SEARCH_LIB,Xpm)
+ if test "$ac_find_libraries" != "" ; then
+ WX_LINK_PATH_EXIST($ac_find_libraries,$GUI_TK_LIBRARY)
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
+ XPM_LINK="-lXpm "
+ AC_DEFINE(wxHAVE_LIB_XPM)
+ AC_MSG_RESULT(found at $ac_find_libraries)
+ else
+ AC_TRY_COMPILE(
+ [
+ #include <X11/xpm.h>
+ ],
+ [
+ int version;
+
+ version = XpmLibraryVersion();
+ ],
+ [
+ XPM_LINK="-lXpm "
+ AC_DEFINE(wxHAVE_LIB_XPM)
+ AC_MSG_RESULT(found in default search path)
+ COMPILED_X_PROGRAM=0
+ ],
+ [
+ AC_MSG_RESULT(no)
+ AC_MSG_WARN(library will be compiled without support for images in XPM format)
+ ]
+ )
+ fi
+
+ GUI_TK_LINK="-lXm $XPM_LINK -lXmu -lXext -lXt -lX11 -lm"
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
+ TOOLKIT=MOTIF
+
+ GUIHEADERS="\$(MOTIF_HEADERS)"
+ GUIOBJS="\$(MOTIF_GUIOBJS)"
+ COMMONOBJS="\$(MOTIF_COMMONOBJS)"
+ GENERICOBJS="\$(MOTIF_GENERICOBJS)"
+ GUIDEPS="\$(MOTIF_GUIDEPS)"
+ COMMONDEPS="\$(MOTIF_COMMONDEPS)"
+ GENERICDEPS="\$(MOTIF_GENERICDEPS)"
+ UNIXOBJS="\$(UNIX_OBJS)"
+ UNIXDEPS="\$(UNIX_DEPS)"
+ GUIDIST=MOTIF_DIST
+fi
+
+if test "$wxUSE_PM" = 1; then
+ TOOLKIT=PM
+
+ GUIOBJS="\$(PM_GUIOBJS)"
+ GUIHEADERS="\$(PM_HEADERS)"
+ COMMONOBJS="\$(PM_COMMONOBJS)"
+ GENERICOBJS="\$(PM_GENERICOBJS)"
+ GUIDEPS="\$(PM_GUIDEPS)"
+ COMMONDEPS="\$(PM_COMMONDEPS)"
+ GENERICDEPS="\$(PM_GENERICDEPS)"
+ UNIXOBJS=
+ UNIXDEPS=
+ GUIDIST=GTK_DIST
+fi
+
+dnl the name of the directory where the files for this toolkit live
+if test "$TOOLKIT" != "PM" ; then
+ TOOLKIT_DIR=`echo ${TOOLKIT} | tr "[[A-Z]]" "[[a-z]]"`
+else
+ TOOLKIT_DIR="os2"
+fi
+
+ dnl the symbol which allows conditional compilation for the given toolkit
+ TOOLKIT_DEF="-D__WX${TOOLKIT}__"
+
+ dnl the name of the (libtool) library
+ WX_LIBRARY="wx_${TOOLKIT_DIR}"
projects / wxWidgets.git / blobdiff