\section{\class{wxTextInputStream}}\label{wxtextinputstream}
This class provides functions that read text datas using an input stream.
-So, you can read \it{text} floats, integers.
+So, you can read {\it text} floats, integers.
The wxTextInputStream correctly reads text files (or streams) in DOS, Macintosh
and Unix formats and reports a single newline char as a line ending.
Note, however, that the arguments are the fixed size types wxUint32, wxInt32 etc
and on a typical 32-bit computer, none of these match to the "long" type (wxInt32
is defined as int on 32-bit architectures) so that you cannot use long. To avoid
-problems (here and elsewhere), make use of the wxInt32, wxUint32, etc types.
+problems (here and elsewhere), make use of wxInt32, wxUint32 and similar types.
+
+If you're scanning through a file using wxTextInputStream, you should check for EOF {\bf before}
+reading the next item (word / number), because otherwise the last item may get lost.
+You should however be prepared to receive an empty item (empty string / zero number) at the
+end of file, especially on Windows systems. This is unavoidable because most (but not all) files end
+with whitespace (i.e. usually a newline).
For example:
+
\begin{verbatim}
wxFileInputStream input( "mytext.txt" );
wxTextInputStream text( input );
\membersection{wxTextInputStream::wxTextInputStream}\label{wxtextinputstreamconstr}
-\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}}
+\func{}{wxTextInputStream}{\param{wxInputStream\&}{ stream}, \param{const wxString\&}{ sep=" $\backslash$t"},
+ \param{wxMBConv\&}{ conv = wxConvUTF8} }
Constructs a text stream object from an input stream. Only read methods will
be available.
\wxheading{Parameters}
-\docparam{stream}{The input stream.}
+\docparam{stream}{The underlying input stream.}
+
+\docparam{sep}{The initial string separator characters.}
+
+\docparam{conv}{{\it In Unicode build only:} The encoding converter used to convert the bytes in the
+ underlying input stream to characters.}
\membersection{wxTextInputStream::\destruct{wxTextInputStream}}
Destroys the wxTextInputStream object.
-\membersection{wxTextInputStream::Read8}
+\membersection{wxTextInputStream::Read8}\label{wxtextinputstreamread8}
+
+\func{wxUint8}{Read8}{\param{int}{ base = 10}}
+
+Reads a single unsigned byte from the stream, given in base {\it base}.
-\func{wxUint8}{Read8}{\void}
+The value of {\it base} must be comprised between $2$ and $36$, inclusive, or
+be a special value $0$ which means that the usual rules of {\tt C} numbers are
+applied: if the number starts with {\tt 0x} it is considered to be in base
+$16$, if it starts with {\tt 0} - in base $8$ and in base $10$ otherwise. Note
+that you may not want to specify the base $0$ if you are parsing the numbers
+which may have leading zeroes as they can yield unexpected (to the user not
+familiar with C) results.
-Reads a single byte from the stream.
+\membersection{wxTextInputStream::Read8S}
+
+\func{wxInt8}{Read8S}{\param{int}{ base = 10}}
+
+Reads a single signed byte from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
\membersection{wxTextInputStream::Read16}
-\func{wxUint16}{Read16}{\void}
+\func{wxUint16}{Read16}{\param{int}{ base = 10}}
+
+Reads a unsigned 16 bit integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::Read16S}
-Reads a 16 bit integer from the stream.
+\func{wxInt16}{Read16S}{\param{int}{ base = 10}}
+
+Reads a signed 16 bit integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
\membersection{wxTextInputStream::Read32}
-\func{wxUint16}{Read32}{\void}
+\func{wxUint32}{Read32}{\param{int}{ base = 10}}
+
+Reads a 32 bit unsigned integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::Read32S}
+
+\func{wxInt32}{Read32S}{\param{int}{ base = 10}}
-Reads a 32 bit integer from the stream.
+Reads a 32 bit signed integer from the stream.
+
+See \helpref{wxTextInputStream::Read8}{wxtextinputstreamread8} for the
+description of the {\it base} parameter.
+
+\membersection{wxTextInputStream::ReadChar}\label{wxtextinputstreamreadchar}
+
+\func{wxChar}{wxTextInputStream::ReadChar}{\void}
+
+Reads a character, returns $0$ if there are no more characters in the stream.
\membersection{wxTextInputStream::ReadDouble}
Reads a double (IEEE encoded) from the stream.
+\membersection{wxTextInputStream::ReadLine}\label{wxtextinputstreamreadline}
+
+\func{wxString}{wxTextInputStream::ReadLine}{\void}
+
+Reads a line from the input stream and returns it (without the end of line
+character).
+
\membersection{wxTextInputStream::ReadString}
\func{wxString}{wxTextInputStream::ReadString}{\void}
-Reads a line from the stream. A line is a string which ends with
-$\backslash$n or $\backslash$r$\backslash$n or $\backslash$r.
+{\bf NB:} This method is deprecated, use \helpref{ReadLine}{wxtextinputstreamreadline}
+or \helpref{ReadWord}{wxtextinputstreamreadword} instead.
+
+Same as \helpref{ReadLine}{wxtextinputstreamreadline}.
+
+\membersection{wxTextInputStream::ReadWord}\label{wxtextinputstreamreadword}
+
+\func{wxString}{wxTextInputStream::ReadWord}{\void}
+
+Reads a word (a sequence of characters until the next separator) from the
+input stream.
+
+\wxheading{See also}
+
+\helpref{SetStringSeparators}{wxtextinputstreamsetstringseparators}
+
+\membersection{wxTextInputStream::SetStringSeparators}\label{wxtextinputstreamsetstringseparators}
+
+\func{void}{SetStringSeparators}{\param{const wxString\& }{sep}}
+
+Sets the characters which are used to define the word boundaries in
+\helpref{ReadWord}{wxtextinputstreamreadword}.
+
+The default separators are the space and {\tt TAB} characters.
% ----------------------------------------------------------------------------
% wxTextOutputStream
\section{\class{wxTextOutputStream}}\label{wxtextoutputstream}
This class provides functions that write text datas using an output stream.
-So, you can write \it{text} floats, integers.
+So, you can write {\it text} floats, integers.
+
+You can also simulate the C++ cout class:
-For example:
\begin{verbatim}
- wxFileOutputStream output( "mytext.txt" );
- wxTextOutputStream text( output );
+ wxFFileOutputStream output( stderr );
+ wxTextOutputStream cout( output );
- output << "This is a text line\n";
- output << 1234;
- output << 1.23456;
+ cout << "This is a text line" << endl;
+ cout << 1234;
+ cout << 1.23456;
\end{verbatim}
The wxTextOutputStream writes text files (or streams) on DOS, Macintosh
\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxTextOutputStream::wxTextOutputStream}\label{wxdataoutputstreamconstr}
+\membersection{wxTextOutputStream::wxTextOutputStream}\label{wxtextoutputstreamconstr}
-\func{}{wxTextOutputStream}{\param{wxOutputStream\&}{ stream}}
+\func{}{wxTextOutputStream}{\param{wxOutputStream\&}{ stream}, \param{wxEOL}{ mode = wxEOL\_NATIVE}}
Constructs a text stream object from an output stream. Only write methods will
be available.
\docparam{stream}{The output stream.}
+\docparam{mode}{The end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.}
+
\membersection{wxTextOutputStream::\destruct{wxTextOutputStream}}
\func{}{\destruct{wxTextOutputStream}}{\void}
Destroys the wxTextOutputStream object.
+\membersection{wxTextOutputStream::GetMode}
+
+\func{wxEOL}{wxTextOutputStream::GetMode}{\void}
+
+Returns the end-of-line mode. One of {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.
+
+\membersection{wxTextOutputStream::SetMode}
+
+\func{void}{wxTextOutputStream::SetMode}{{\param wxEOL}{ mode = wxEOL\_NATIVE}}
+
+Set the end-of-line mode. One of {\bf wxEOL\_NATIVE}, {\bf wxEOL\_DOS}, {\bf wxEOL\_MAC} and {\bf wxEOL\_UNIX}.
+
\membersection{wxTextOutputStream::Write8}
\func{void}{wxTextOutputStream::Write8}{{\param wxUint8 }{i8}}
\membersection{wxTextOutputStream::WriteDouble}
-\func{void}{wxTextOutputStream::WriteDouble}{{\param double }{f}}
+\func{virtual void}{wxTextOutputStream::WriteDouble}{{\param double }{f}}
Writes the double {\it f} to the stream using the IEEE format.
\membersection{wxTextOutputStream::WriteString}
-\func{void}{wxTextOutputStream::WriteString}{{\param const wxString\& }{string}}
+\func{virtual void}{wxTextOutputStream::WriteString}{{\param const wxString\& }{string}}
+
+Writes {\it string} as a line. Depending on the end-of-line mode the end of
+line ('$\backslash$n') characters in the string are converted to the correct
+line ending terminator.
-Writes {\it string} as a line. Depending on the operating system, it adds
-$\backslash$n or $\backslash$r$\backslash$n.
projects / wxWidgets.git / blobdiff