// debugging settings
// ----------------------------------------------------------------------------
+// wxDEBUG_LEVEL will be defined as 1 in wx/debug.h so normally there is no
+// need to define it here. You may do it for two reasons: either completely
+// disable/compile out the asserts in release version (then do it inside #ifdef
+// NDEBUG) or, on the contrary, enable more asserts, including the usually
+// disabled ones, in the debug build (then do it inside #ifndef NDEBUG)
+//
+// #ifdef NDEBUG
+// #define wxDEBUG_LEVEL 0
+// #else
+// #define wxDEBUG_LEVEL 2
+// #endif
+
+// wxHandleFatalExceptions() may be used to catch the program faults at run
+// time and, instead of terminating the program with a usual GPF message box,
+// call the user-defined wxApp::OnFatalException() function. If you set
+// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
+//
+// This setting is for Win32 only and can only be enabled if your compiler
+// supports Win32 structured exception handling (currently only VC++ does)
+//
+// Default is 1
+//
+// Recommended setting: 1 if your compiler supports it.
+#define wxUSE_ON_FATAL_EXCEPTION 1
+
+// Set this to 1 to be able to generate a human-readable (unlike
+// machine-readable minidump created by wxCrashReport::Generate()) stack back
+// trace when your program crashes using wxStackWalker
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_STACKWALKER 1
+
+// Set this to 1 to compile in wxDebugReport class which allows you to create
+// and optionally upload to your web site a debug report consisting of back
+// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, it is compiled into a separate library so there
+// is no overhead if you don't use it
+#define wxUSE_DEBUGREPORT 1
+
// Generic comment about debugging settings: they are very useful if you don't
// use any other memory leak detection tools such as Purify/BoundsChecker, but
// are probably redundant otherwise. Also, Visual C++ CRT has the same features
// may prefer to use it instead of built in memory debugging code because it is
// faster and more fool proof.
//
-// Using VC++ CRT memory debugging is enabled by default in debug mode
-// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
+// Using VC++ CRT memory debugging is enabled by default in debug build (_DEBUG
+// is defined) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
// and if __NO_VC_CRTDBG__ is not defined.
+// The rest of the options in this section are obsolete and not supported,
+// enable them at your own risk.
+
// If 1, enables wxDebugContext, for writing error messages to file, etc. If
// __WXDEBUG__ is not defined, will still use the normal memory operators.
//
// Recommended setting: 0
#define wxUSE_DEBUG_NEW_ALWAYS 0
-// wxHandleFatalExceptions() may be used to catch the program faults at run
-// time and, instead of terminating the program with a usual GPF message box,
-// call the user-defined wxApp::OnFatalException() function. If you set
-// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
-//
-// This setting is for Win32 only and can only be enabled if your compiler
-// supports Win32 structured exception handling (currently only VC++ does)
-//
-// Default is 1
-//
-// Recommended setting: 1 if your compiler supports it.
-#define wxUSE_ON_FATAL_EXCEPTION 1
-
-// Set this to 1 to be able to generate a human-readable (unlike
-// machine-readable minidump created by wxCrashReport::Generate()) stack back
-// trace when your program crashes using wxStackWalker
-//
-// Default is 1 if supported by the compiler.
-//
-// Recommended setting: 1, set to 0 if your programs never crash
-#define wxUSE_STACKWALKER 1
-
-// Set this to 1 to compile in wxDebugReport class which allows you to create
-// and optionally upload to your web site a debug report consisting of back
-// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
-//
-// Default is 1 if supported by the compiler.
-//
-// Recommended setting: 1, it is compiled into a separate library so there
-// is no overhead if you don't use it
-#define wxUSE_DEBUGREPORT 1
// ----------------------------------------------------------------------------
// Unicode support
// ----------------------------------------------------------------------------
-// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
-// defined as wchar_t, wxString will use Unicode internally. If you set this
-// to 1, you must use wxT() macro for all literal strings in the program.
-//
-// Unicode is currently only fully supported under Windows NT/2000/XP
-// (Windows 9x doesn't support it and the programs compiled in Unicode mode
-// will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
-//
-// Default is 0 (but only because of makefiles)
-//
-// Recommended setting: 1
+// These settings are obsolete: the library is always built in Unicode mode
+// now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if
+// absolutely necessary -- updating it is strongly recommended as the ANSI mode
+// will disappear completely in future wxWidgets releases.
#ifndef wxUSE_UNICODE
- #define wxUSE_UNICODE 0
+ #define wxUSE_UNICODE 1
#endif
-// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
-// compiling the program in Unicode mode. More precisely, it will be possible
-// to construct wxString from a wide (Unicode) string and convert any wxString
-// to Unicode.
-//
-// Default is 1
-//
-// Recommended setting: 1
+// wxUSE_WCHAR_T is required by wxWidgets now, don't change.
#define wxUSE_WCHAR_T 1
// ----------------------------------------------------------------------------
// Recommended setting: 1 as setting it to 0 disables many other things
#define wxUSE_STREAMS 1
+// This is not a real option but is used as the default value for
+// wxUSE_STD_IOSTREAM and wxUSE_STD_STRING.
+//
+// Currently the Digital Mars and Watcom compilers come without standard C++
+// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
+// them (e.g. from STLPort).
+//
+// VC++ 5.0 does include standard C++ library headers, however they produce
+// many warnings that can't be turned off when compiled at warning level 4.
+#if defined(__DMC__) || defined(__WATCOMC__) \
+ || (defined(_MSC_VER) && _MSC_VER < 1200)
+ #define wxUSE_STD_DEFAULT 0
+#else
+ #define wxUSE_STD_DEFAULT 1
+#endif
+
// Use standard C++ streams if 1 instead of wx streams in some places. If
// disabled (default), wx streams are used everywhere and wxWidgets doesn't
// depend on the standard streams library.
// Recommended setting: 1 if you use the standard streams anyhow and so
// dependency on the standard streams library is not a
// problem
-#define wxUSE_STD_IOSTREAM 0
+#define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT
// Enable conversion to standard C++ string if 1.
//
// Default is 1 for most compilers.
//
-// Currently the Digital Mars and Watcom compilers come without standard C++
-// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
-// them (e.g. from STLPort).
-//
-// VC++ 5.0 does include standard C++ library header, however they produce
-// many warnings that can't be turned off when compiled at warning level 4.
-#if defined(__DMC__) || defined(__WATCOMC__) \
- || (defined(_MSC_VER) && _MSC_VER < 1200)
- #define wxUSE_STD_STRING 0
-#else
- #define wxUSE_STD_STRING 1
-#endif
+// Recommended setting: 1 unless you want to ensure your program doesn't use
+// the standard C++ library at all.
+#define wxUSE_STD_STRING wxUSE_STD_DEFAULT
// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
// Note that if the system's implementation does not support positional
// Recommended setting: 1 (but can be safely disabled if you don't use it)
#define wxUSE_BASE64 1
+// Set this to 1 to be able to use wxEventLoop even in console applications
+// (i.e. using base library only, without GUI). This is mostly useful for
+// processing socket events but is also necessary to use timers in console
+// applications
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be safely disabled if you don't use it)
+#define wxUSE_CONSOLE_EVENTLOOP 1
+
// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
//
// i18n support: _() macro, wxLocale class. Requires wxTextFile.
#define wxUSE_INTL 1
+// Provide wxFoo_l() functions similar to standard foo() functions but taking
+// an extra locale parameter.
+//
+// Notice that this is fully implemented only for the systems providing POSIX
+// xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary
+// almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will
+// only work for the current user locale and "C" locale. You can use
+// wxHAS_XLOCALE_SUPPORT to test whether the full support is available.
+//
+// Default is 1
+//
+// Recommended setting: 1 but may be disabled if you are writing programs
+// running only in C locale anyhow
+#define wxUSE_XLOCALE 1
+
// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
// allow to manipulate dates, times and time intervals. wxDateTime replaces the
// old wxTime and wxDate classes which are still provided for backwards
// Recommended setting: 1 (needed by wxSocket)
#define wxUSE_STOPWATCH 1
+// Set wxUSE_FSWATCHER to 1 if you want to enable wxFileSystemWatcher
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_FSWATCHER 1
+
// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
// which allow the application to store its settings in the persistent
// storage. Setting this to 1 will also enable on-demand creation of the
// Set to 1 to use socket classes
#define wxUSE_SOCKETS 1
+// Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS)
+//
+// Notice that currently setting this option under Windows will result in
+// programs which can only run on recent OS versions (with ws2_32.dll
+// installed) which is why it is disabled by default.
+//
+// Default is 1.
+//
+// Recommended setting: 1 if you need IPv6 support
+#define wxUSE_IPV6 0
+
// Set to 1 to enable virtual file systems (required by wxHTML)
#define wxUSE_FILESYSTEM 1
// Joystick support class
#define wxUSE_JOYSTICK 1
+// wxFontEnumerator class
+#define wxUSE_FONTENUM 1
+
// wxFontMapper class
#define wxUSE_FONTMAP 1
// possible in which case setting this to 0 can gain up to 100KB.
#define wxUSE_VARIANT 1
+// Support for wxAny class, the successor for wxVariant.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you want to reduce the library size by a small amount,
+// or your compiler cannot for some reason cope with complexity of templates used.
+#define wxUSE_ANY 1
+
// Support for regular expression matching via wxRegEx class: enable this to
// use POSIX regular expressions in your code. You need to compile regex
// library from src/regex to use it under Windows.
// Recommended setting: 1
#define wxUSE_MEDIACTRL 1
-// Use GStreamer for Unix (req a lot of dependancies)
-//
-// Default is 0
-//
-// Recommended setting: 1 (wxMediaCtrl won't work by default without it)
-#define wxUSE_GSTREAMER 0
-
// Use wxWidget's XRC XML-based resource system. Recommended.
//
// Default is 1
// Recommended setting: 1
#define wxUSE_AUI 1
+// Use wxWidget's Ribbon classes for interfaces
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_RIBBON 1
+
+// Use wxPropertyGrid.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_PROPGRID 1
+
// Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla.
//
// Default is 1
// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
// 2D drawing API. (Still somewhat experimental)
//
-// Please note that on Windows you will need to link with gdiplus.lib (use
-// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
-// application if you want it to be runnable on pre-XP systems.
+// Please note that on Windows gdiplus.dll is loaded dynamically which means
+// that nothing special needs to be done as long as you don't use
+// wxGraphicsContext at all or only use it on XP and later systems but you
+// still do need to distribute it yourself for an application using
+// wxGraphicsContext to be runnable on pre-XP systems.
+//
+// Default is 1 except if you're using a non-Microsoft compiler under Windows
+// as only MSVC7+ is known to ship with gdiplus.h. For other compilers (e.g.
+// mingw32) you may need to install the headers (and just the headers)
+// yourself. If you do, change the setting below manually.
+//
+// Recommended setting: 1 if supported by the compilation environment
+
+// notice that we can't use wxCHECK_VISUALC_VERSION() here as this file is
+// included from wx/platform.h before wxCHECK_VISUALC_VERSION() is defined
+#ifdef _MSC_VER
+# if _MSC_VER >= 1310
+ // MSVC7.1+ comes with new enough Platform SDK, enable
+ // wxGraphicsContext support for it
+# define wxUSE_GRAPHICS_CONTEXT 1
+# else
+ // MSVC 6 didn't include GDI+ headers so disable by default, enable it
+ // here if you use MSVC 6 with a newer SDK
+# define wxUSE_GRAPHICS_CONTEXT 0
+# endif
+#else
+ // Disable support for other Windows compilers, enable it if your compiler
+ // comes with new enough SDK or you installed the headers manually.
+ //
+ // Notice that this will be set by configure under non-Windows platforms
+ // anyhow so the value there is not important.
+# define wxUSE_GRAPHICS_CONTEXT 0
+#endif
+
+// Enable wxGraphicsContext implementation using Cairo library.
+//
+// This is not needed under Windows and detected automatically by configure
+// under other systems, however you may set this to 1 manually if you installed
+// Cairo under Windows yourself and prefer to use it instead the native GDI+
+// implementation.
//
// Default is 0
//
-// Recommended setting: 1
-#ifndef wxUSE_GRAPHICS_CONTEXT
-#define wxUSE_GRAPHICS_CONTEXT 0
-#endif
+// Recommended setting: 0
+#define wxUSE_CAIRO 0
+
// ----------------------------------------------------------------------------
// Individual GUI controls
#define wxUSE_COLLPANE 1 // wxCollapsiblePane
#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_COMMANDLINKBUTTON 1 // wxCommandLinkButton
#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
#define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox
+#define wxUSE_FILECTRL 1 // wxFileCtrl
#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
#define wxUSE_GAUGE 1 // wxGauge
+#define wxUSE_HEADERCTRL 1 // wxHeaderCtrl
#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
#define wxUSE_LISTBOX 1 // wxListBox
#define wxUSE_LISTCTRL 1 // wxListCtrl
#define wxUSE_RADIOBOX 1 // wxRadioBox
#define wxUSE_RADIOBTN 1 // wxRadioButton
+#define wxUSE_RICHMSGDLG 1 // wxRichMessageDialog
#define wxUSE_SCROLLBAR 1 // wxScrollBar
#define wxUSE_SEARCHCTRL 1 // wxSearchCtrl
#define wxUSE_SLIDER 1 // wxSlider
// Recommended setting: 1
#define wxUSE_TOOLBOOK 1
-// wxTabDialog is a generic version of wxNotebook but it is incompatible with
-// the new class. It shouldn't be used in new code.
+// wxTaskBarIcon is a small notification icon shown in the system toolbar or
+// dock.
//
-// Default is 0.
+// Default is 1.
//
-// Recommended setting: 0 (use wxNotebook)
-#define wxUSE_TAB_DIALOG 0
+// Recommended setting: 1 (but can be set to 0 if you don't need it)
+#define wxUSE_TASKBARICON 1
// wxGrid class
//
// Recommended setting: 1 but can be safely set to 0
#define wxUSE_BITMAPCOMBOBOX 1
+// wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items
+// up and down in it. It is also used as part of wxRearrangeDialog.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 (currently used only by
+// wxHeaderCtrl)
+#define wxUSE_REARRANGECTRL 1
+
// ----------------------------------------------------------------------------
// Miscellaneous GUI stuff
// ----------------------------------------------------------------------------
// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
#define wxUSE_ACCEL 1
+// Use the standard art provider. The icons returned by this provider are
+// embedded into the library as XPMs so disabling it reduces the library size
+// somewhat but this should only be done if you use your own custom art
+// provider returning the icons or never use any icons not provided by the
+// native art provider (which might not be implemented at all for some
+// platforms) or by the Tango icons provider (if it's not itself disabled
+// below).
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you use your own custom art provider.
+#define wxUSE_ARTPROVIDER_STD 1
+
+// Use art provider providing Tango icons: this art provider has higher quality
+// icons than the default ones using smaller size XPM icons without
+// transparency but the embedded PNG icons add to the library size.
+//
+// Default is 1 under non-GTK ports. Under wxGTK the native art provider using
+// the GTK+ stock icons replaces it so it is normally not necessary.
+//
+// Recommended setting: 1 but can be turned off to reduce the library size.
+#define wxUSE_ARTPROVIDER_TANGO 1
+
// Hotkey support (currently Windows only)
#define wxUSE_HOTKEY 1
// enumerated above, then this class is mostly useless too)
#define wxUSE_IMAGLIST 1
+// Use wxInfoBar class.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be disabled without problems as nothing
+// depends on it)
+#define wxUSE_INFOBAR 1
+
// Use wxMenu, wxMenuBar, wxMenuItem.
//
// Default is 1.
// Recommended setting: 1 (can't be disabled under MSW)
#define wxUSE_MENUS 1
+// Use wxNotificationMessage.
+//
+// wxNotificationMessage allows to show non-intrusive messages to the user
+// using balloons, banners, popups or whatever is the appropriate method for
+// the current platform.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTIFICATION_MESSAGE 1
+
// Use wxSashWindow class.
//
// Default is 1.
// wxValidator class and related methods
#define wxUSE_VALIDATORS 1
+// Use reference counted ID management: this means that wxWidgets will track
+// the automatically allocated ids (those used when you use wxID_ANY when
+// creating a window, menu or toolbar item &c) instead of just supposing that
+// the program never runs out of them. This is mostly useful only under wxMSW
+// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
+// long-running programs can run into problems with ids reuse without this. On
+// the other platforms, where the ids have the full int range, this shouldn't
+// be necessary.
+#ifdef __WXMSW__
+#define wxUSE_AUTOID_MANAGEMENT 1
+#else
+#define wxUSE_AUTOID_MANAGEMENT 0
+#endif
+
// ----------------------------------------------------------------------------
// common dialogs
// ----------------------------------------------------------------------------
// use this function
#define wxUSE_ABOUTDLG 1
+// wxFileHistory class
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_FILE_HISTORY 1
+
// ----------------------------------------------------------------------------
// Metafiles support
// ----------------------------------------------------------------------------
// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
-// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
-// will need to manually add opengl32.lib and glu32.lib to the list of
-// libraries linked with your program if you use OpenGL.
+// set to 1 and, under Windows, also to add opengl32.lib and glu32.lib to the
+// list of libraries used to link your application (although this is done
+// implicitly for Microsoft Visual C++ users).
//
-// Default is 0.
+// Default is 1 unless the compiler is known to ship without the necessary
+// headers (Digital Mars) or the platform doesn't support OpenGL (Windows CE).
//
-// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
-#define wxUSE_GLCANVAS 0
+// Recommended setting: 1 if you intend to use OpenGL, can be safely set to 0
+// otherwise.
+#define wxUSE_GLCANVAS 1
// wxRichTextCtrl allows editing of styled text.
//
// ----------------------------------------------------------------------------
// wxSingleInstanceChecker class allows to verify at startup if another program
-// instance is running (it is only available under Win32)
+// instance is running.
//
// Default is 1
//
#define wxUSE_MOUSEWHEEL 1
// Include mouse wheel support
+// Compile wxUIActionSimulator class?
+#define wxUSE_UIACTIONSIMULATOR 1
+
// ----------------------------------------------------------------------------
// wxDC classes for various output formats
// ----------------------------------------------------------------------------
#define wxUSE_AFM_FOR_POSTSCRIPT 1
// Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows
-// to create fiels in SVG (Scalable Vector Graphics) format.
+// to create files in SVG (Scalable Vector Graphics) format.
#define wxUSE_SVG 1
-// ----------------------------------------------------------------------------
-// database classes
-// ----------------------------------------------------------------------------
-
-// Define 1 to use ODBC classes
-#define wxUSE_ODBC 0
-
-// For backward compatibility reasons, this parameter now only controls the
-// default scrolling method used by cursors. This default behavior can be
-// overriden by setting the second param of wxDB::wxDbGetConnection() or
-// wxDb() constructor to indicate whether the connection (and any wxDbTable()s
-// that use the connection) should support forward only scrolling of cursors,
-// or both forward and backward support for backward scrolling cursors is
-// dependent on the data source as well as the ODBC driver being used.
-#define wxODBC_FWD_ONLY_CURSORS 1
-
-// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
-// member variables. With a setting of 1, full backward compatibility with the
-// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
-// as future development will be done only on the non-deprecated
-// functions/classes/member variables/etc.
-#define wxODBC_BACKWARD_COMPATABILITY 0
-
// ----------------------------------------------------------------------------
// other compiler (mis)features
// ----------------------------------------------------------------------------
#define REMOVE_UNUSED_ARG 1
// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
-// them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
-// and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
-// used anyhow.
+// them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
//
-// Default is 1.
+// Note that newer compilers (including VC++ 7.1 and later) don't support
+// wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
+//
+// Default is 0.
//
-// Recommended setting: whatever your compiler likes more
-#define wxUSE_IOSTREAMH 1
+// Recommended setting: 0, only set to 1 if you use a really old compiler
+#define wxUSE_IOSTREAMH 0
// ----------------------------------------------------------------------------
// image format support
/* --- end common options --- */
+/* --- start MSW options --- */
// ----------------------------------------------------------------------------
// Windows-only settings
// ----------------------------------------------------------------------------
#define wxUSE_DC_CACHEING 1
// Set this to 1 to enable wxDIB class used internally for manipulating
-// wxBitmao data.
+// wxBitmap data.
//
// Default is 1, set it to 0 only if you don't use wxImage neither
//
// (just use Windows printing).
#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
+// Set this to 1 to compile in wxRegKey class.
+//
+// Default is 1
+//
+// Recommended setting: 1, this is used internally by wx in a few places
+#define wxUSE_REGKEY 1
+
// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
// which allows to put more than ~32Kb of text in it even under Win9x (NT
// doesn't have such limitation).
// Recommended setting: 1, set to 0 for a small library size reduction
#define wxUSE_OWNER_DRAWN 1
+// Set this to 1 to enable MSW-specific wxTaskBarIcon::ShowBalloon() method. It
+// is required by native wxNotificationMessage implementation.
+//
+// Default is 1 but disabled in wx/msw/chkconf.h if SDK is too old to contain
+// the necessary declarations.
+//
+// Recommended setting: 1, set to 0 for a tiny library size reduction
+#define wxUSE_TASKBARICON_BALLOONS 1
+
// Set to 1 to compile MS Windows XP theme engine support
#define wxUSE_UXTHEME 1
-// Set to 1 to auto-adapt to MS Windows XP themes where possible
-// (notably, wxNotebook pages)
-#define wxUSE_UXTHEME_AUTO 1
-
// Set to 1 to use InkEdit control (Tablet PC), if available
#define wxUSE_INKEDIT 0
+// Set to 1 to enable .INI files based wxConfig implementation (wxIniConfig)
+//
+// Default is 0.
+//
+// Recommended setting: 0, nobody uses .INI files any more
+#define wxUSE_INICONF 0
+
// ----------------------------------------------------------------------------
// Generic versions of native controls
// ----------------------------------------------------------------------------
//
// Recommended setting: 1, set to 0 if your programs never crash
#define wxUSE_CRASHREPORT 1
-
-// ----------------------------------------------------------------------------
-// obsolete settings
-// ----------------------------------------------------------------------------
-
-// NB: all settings in this section are obsolete and should not be used/changed
-// at all, they will disappear
-
-// Define 1 to use bitmap messages.
-#define wxUSE_BITMAP_MESSAGE 1
+/* --- end MSW options --- */
#endif // _WX_SETUP_H_
projects / wxWidgets.git / blobdiff