%constant wxEventType wxEVT_SCROLL_PAGEDOWN;
%constant wxEventType wxEVT_SCROLL_THUMBTRACK;
%constant wxEventType wxEVT_SCROLL_THUMBRELEASE;
-%constant wxEventType wxEVT_SCROLL_ENDSCROLL;
+%constant wxEventType wxEVT_SCROLL_CHANGED;
+%pythoncode { wxEVT_SCROLL_ENDSCROLL = wxEVT_SCROLL_CHANGED }
+
// Scroll events from wxWindow
%constant wxEventType wxEVT_SCROLLWIN_TOP;
%constant wxEventType wxEVT_UPDATE_UI;
%constant wxEventType wxEVT_SIZING;
%constant wxEventType wxEVT_MOVING;
+%constant wxEventType wxEVT_HIBERNATE;
+
// Generic command events
// Note: a click is a higher-level event than button down/up
EVT_CHILD_FOCUS = wx.PyEventBinder( wxEVT_CHILD_FOCUS )
EVT_ACTIVATE = wx.PyEventBinder( wxEVT_ACTIVATE )
EVT_ACTIVATE_APP = wx.PyEventBinder( wxEVT_ACTIVATE_APP )
+EVT_HIBERNATE = wx.PyEventBinder( wxEVT_HIBERNATE )
EVT_END_SESSION = wx.PyEventBinder( wxEVT_END_SESSION )
EVT_QUERY_END_SESSION = wx.PyEventBinder( wxEVT_QUERY_END_SESSION )
EVT_DROP_FILES = wx.PyEventBinder( wxEVT_DROP_FILES )
EVT_SCROLLWIN_THUMBTRACK = wx.PyEventBinder( wxEVT_SCROLLWIN_THUMBTRACK )
EVT_SCROLLWIN_THUMBRELEASE = wx.PyEventBinder( wxEVT_SCROLLWIN_THUMBRELEASE )
-%# Scrolling from wxSlider and wxScrollBar
+%# Scrolling from wx.Slider and wx.ScrollBar
EVT_SCROLL = wx.PyEventBinder([ wxEVT_SCROLL_TOP,
wxEVT_SCROLL_BOTTOM,
wxEVT_SCROLL_LINEUP,
wxEVT_SCROLL_PAGEDOWN,
wxEVT_SCROLL_THUMBTRACK,
wxEVT_SCROLL_THUMBRELEASE,
- wxEVT_SCROLL_ENDSCROLL,
+ wxEVT_SCROLL_CHANGED,
])
EVT_SCROLL_TOP = wx.PyEventBinder( wxEVT_SCROLL_TOP )
EVT_SCROLL_PAGEDOWN = wx.PyEventBinder( wxEVT_SCROLL_PAGEDOWN )
EVT_SCROLL_THUMBTRACK = wx.PyEventBinder( wxEVT_SCROLL_THUMBTRACK )
EVT_SCROLL_THUMBRELEASE = wx.PyEventBinder( wxEVT_SCROLL_THUMBRELEASE )
-EVT_SCROLL_ENDSCROLL = wx.PyEventBinder( wxEVT_SCROLL_ENDSCROLL )
-
-%# Scrolling from wxSlider and wxScrollBar, with an id
+EVT_SCROLL_CHANGED = wx.PyEventBinder( wxEVT_SCROLL_CHANGED )
+EVT_SCROLL_ENDSCROLL = EVT_SCROLL_CHANGED
+
+%# Scrolling from wx.Slider and wx.ScrollBar, with an id
EVT_COMMAND_SCROLL = wx.PyEventBinder([ wxEVT_SCROLL_TOP,
wxEVT_SCROLL_BOTTOM,
wxEVT_SCROLL_LINEUP,
wxEVT_SCROLL_PAGEDOWN,
wxEVT_SCROLL_THUMBTRACK,
wxEVT_SCROLL_THUMBRELEASE,
- wxEVT_SCROLL_ENDSCROLL,
+ wxEVT_SCROLL_CHANGED,
], 1)
EVT_COMMAND_SCROLL_TOP = wx.PyEventBinder( wxEVT_SCROLL_TOP, 1)
EVT_COMMAND_SCROLL_PAGEDOWN = wx.PyEventBinder( wxEVT_SCROLL_PAGEDOWN, 1)
EVT_COMMAND_SCROLL_THUMBTRACK = wx.PyEventBinder( wxEVT_SCROLL_THUMBTRACK, 1)
EVT_COMMAND_SCROLL_THUMBRELEASE = wx.PyEventBinder( wxEVT_SCROLL_THUMBRELEASE, 1)
-EVT_COMMAND_SCROLL_ENDSCROLL = wx.PyEventBinder( wxEVT_SCROLL_ENDSCROLL, 1)
-
-EVT_SPIN_UP = wx.PyEventBinder( wxEVT_SCROLL_LINEUP, 1)
-EVT_SPIN_DOWN = wx.PyEventBinder( wxEVT_SCROLL_LINEDOWN, 1)
-EVT_SPIN = wx.PyEventBinder( wxEVT_SCROLL_THUMBTRACK, 1)
+EVT_COMMAND_SCROLL_CHANGED = wx.PyEventBinder( wxEVT_SCROLL_CHANGED, 1)
+EVT_COMMAND_SCROLL_ENDSCROLL = EVT_COMMAND_SCROLL_CHANGED
EVT_BUTTON = wx.PyEventBinder( wxEVT_COMMAND_BUTTON_CLICKED, 1)
EVT_CHECKBOX = wx.PyEventBinder( wxEVT_COMMAND_CHECKBOX_CLICKED, 1)
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxEvent,
+"An event is a structure holding information about an event passed to a
+callback or member function. wx.Event is an abstract base class for
+other event classes", "");
+
class wxEvent : public wxObject {
public:
// wxEvent(int winid = 0, wxEventType commandType = wxEVT_NULL); // *** This class is now an ABC
~wxEvent();
- void SetEventType(wxEventType typ);
- wxEventType GetEventType() const;
- wxObject *GetEventObject() const;
- void SetEventObject(wxObject *obj);
+ DocDeclStr(
+ void , SetEventType(wxEventType typ),
+ "Sets the specific type of the event.", "");
+
+ DocDeclStr(
+ wxEventType , GetEventType() const,
+ "Returns the identifier of the given event type, such as
+``wxEVT_COMMAND_BUTTON_CLICKED``.", "");
+
+ DocDeclStr(
+ wxObject *, GetEventObject() const,
+ "Returns the object (usually a window) associated with the event, if
+any.", "");
+
+ DocDeclStr(
+ void , SetEventObject(wxObject *obj),
+ "Sets the originating object, or in other words, obj is normally the
+object that is sending the event.", "");
+
long GetTimestamp() const;
void SetTimestamp(long ts = 0);
- int GetId() const;
- void SetId(int Id);
+
+ DocDeclStr(
+ int , GetId() const,
+ "Returns the identifier associated with this event, such as a button
+command id.", "");
+
+ DocDeclStr(
+ void , SetId(int Id),
+ "Set's the ID for the event. This is usually the ID of the window that
+is sending the event, but it can also be a command id from a menu
+item, etc.", "");
+
- bool IsCommandEvent() const;
+ DocDeclStr(
+ bool , IsCommandEvent() const,
+ "Returns true if the event is or is derived from `wx.CommandEvent` else
+it returns false. Note: Exists only for optimization purposes.", "");
+
- // Can instruct event processor that we wish to ignore this event
- // (treat as if the event table entry had not been found): this must be done
- // to allow the event processing by the base classes (calling event.Skip()
- // is the analog of calling the base class verstion of a virtual function)
- void Skip(bool skip = True);
- bool GetSkipped() const;
+ DocDeclStr(
+ void , Skip(bool skip = true),
+ "Called by an event handler, it controls whether additional event
+handlers bound to this event will be called after the current event
+handler returns. Skip(false) (the default setting) will prevent
+additional event handlers from being called and control will be
+returned to the sender of the event immediately after the current
+handler has finished. Skip(True) will cause the event processing
+system to continue searching for a handler function for this event.
+", "");
+
+ DocDeclStr(
+ bool , GetSkipped() const,
+ "Returns true if the event handler should be skipped, false otherwise.
+:see: `Skip`", "");
+
- // Determine if this event should be propagating to the parent window.
- bool ShouldPropagate() const;
+ DocDeclStr(
+ bool , ShouldPropagate() const,
+ "Test if this event should be propagated to the parent window or not,
+i.e. if the propagation level is currently greater than 0.", "");
+
// Stop an event from propagating to its parent window, returns the old
// propagation level value
- int StopPropagation();
+ DocDeclStr(
+ int , StopPropagation(),
+ "Stop the event from propagating to its parent window. Returns the old
+propagation level value which may be later passed to
+`ResumePropagation` to allow propagating the event again.", "");
+
- // Resume the event propagation by restoring the propagation level
- // (returned by StopPropagation())
- void ResumePropagation(int propagationLevel);
+ DocDeclStr(
+ void , ResumePropagation(int propagationLevel),
+ "Resume the event propagation by restoring the propagation level. (For
+example, you can use the value returned by an earlier call to
+`StopPropagation`.)
+", "");
+
// this function is used to create a copy of the event polymorphically and
// all derived classes must implement it because otherwise wxPostEvent()
//---------------------------------------------------------------------------
%newgroup;
-// Helper class to temporarily change an event not to propagate.
+DocStr(wxPropagationDisabler,
+"Helper class to temporarily change an event not to propagate. Simply
+create an instance of this class and then whe it is destroyed the
+propogation of the event will be restored.", "");
class wxPropagationDisabler
{
public:
};
-// Another one to temporarily lower propagation level.
+DocStr( wxPropagateOnce,
+"A helper class that will temporarily lower propagation level of an
+event. Simply create an instance of this class and then whe it is
+destroyed the propogation of the event will be restored.", "");
class wxPropagateOnce
{
public:
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxCommandEvent,
+"This event class contains information about command events, which
+originate from a variety of simple controls, as well as menus and
+toolbars.", "");
+
class wxCommandEvent : public wxEvent
{
public:
// void *GetClientObject() const { return m_clientObject; }
- // Get listbox selection if single-choice
- int GetSelection() const;
+ DocDeclStr(
+ int , GetSelection() const,
+ "Returns item index for a listbox or choice selection event (not valid
+for a deselection).", "");
+
- // Set/Get listbox/choice selection string
void SetString(const wxString& s);
- wxString GetString() const;
+ DocDeclStr(
+ wxString , GetString() const,
+ "Returns item string for a listbox or choice selection event (not valid
+for a deselection).", "");
+
- // Get checkbox value
- bool IsChecked() const;
+ DocDeclStr(
+ bool , IsChecked() const,
+ "This method can be used with checkbox and menu events: for the
+checkboxes, the method returns true for a selection event and false
+for a deselection one. For the menu events, this method indicates if
+the menu item just has become checked or unchecked (and thus only
+makes sense for checkable menu items).", "");
+
%pythoncode { Checked = IsChecked }
- // True if the listbox event was a selection.
- bool IsSelection() const;
+ DocDeclStr(
+ bool , IsSelection() const,
+ "For a listbox or similar event, returns true if it is a selection,
+false if it is a deselection.", "");
+
void SetExtraLong(long extraLong);
- long GetExtraLong() const;
+ DocDeclStr(
+ long , GetExtraLong() const,
+ "Returns extra information dependant on the event objects type. If the
+event comes from a listbox selection, it is a boolean determining
+whether the event was a selection (true) or a deselection (false). A
+listbox deselection only occurs for multiple-selection boxes, and in
+this case the index and string values are indeterminate and the
+listbox must be examined by the application.", "");
+
void SetInt(int i);
- long GetInt() const;
+ DocDeclStr(
+ long , GetInt() const,
+ "Returns the integer identifier corresponding to a listbox, choice or
+radiobox selection (only if the event was a selection, not a
+deselection), or a boolean value representing the value of a checkbox.", "");
+
virtual wxEvent *Clone() const;
//---------------------------------------------------------------------------
%newgroup;
-// this class adds a possibility to react (from the user) code to a control
-// notification: allow or veto the operation being reported.
+DocStr(wxNotifyEvent,
+"An instance of this class (or one of its derived classes) is sent from
+a control when the control's state is being changed and the control
+allows that change to be prevented from happening. The event handler
+can call `Veto` or `Allow` to tell the control what to do.", "");
+
class wxNotifyEvent : public wxCommandEvent
{
public:
wxNotifyEvent(wxEventType commandType = wxEVT_NULL, int winid = 0);
- // veto the operation (usually it's allowed by default)
- void Veto();
+ DocDeclStr(
+ void , Veto(),
+ "Prevents the change announced by this event from happening.
+
+It is in general a good idea to notify the user about the reasons for
+vetoing the change because otherwise the applications behaviour (which
+just refuses to do what the user wants) might be quite surprising.", "");
+
- // allow the operation if it was disabled by default
- void Allow();
+ DocDeclStr(
+ void , Allow(),
+ "This is the opposite of `Veto`: it explicitly allows the event to be
+processed. For most events it is not necessary to call this method as
+the events are allowed anyhow but some are forbidden by default (this
+will be mentioned in the corresponding event description).", "");
+
- // for implementation code only: is the operation allowed?
- bool IsAllowed();
+ DocDeclStr(
+ bool , IsAllowed(),
+ "Returns true if the change is allowed (`Veto` hasn't been called) or
+false otherwise (if it was).", "");
+
};
//---------------------------------------------------------------------------
%newgroup;
-// Scroll event class, derived form wxCommandEvent. wxScrollEvents are
-// sent by wxSlider and wxScrollBar.
+DocStr(wxScrollEvent,
+"A scroll event holds information about events sent from stand-alone
+scrollbars and sliders. Note that scrolled windows do not send
+instnaces of this event class, but send the `wx.ScrollWinEvent`
+instead.", "
+
+Events
+-------
+ ======================= ==========================================
+ EVT_SCROLL Used to bind all scroll events
+ EVT_SCROLL_TOP scroll-to-top events (minimum position)
+ EVT_SCROLL_BOTTOM scroll-to-bottom events (maximum position)
+ EVT_SCROLL_LINEUP line up events
+ EVT_SCROLL_LINEDOWN line down events
+ EVT_SCROLL_PAGEUP page up events
+ EVT_SCROLL_PAGEDOWN page down events
+ EVT_SCROLL_THUMBTRACK thumbtrack events (frequent events sent
+ as the user drags the 'thumb')
+ EVT_SCROLL_THUMBRELEASE thumb release events.
+ EVT_SCROLL_ENDSCROLL End of scrolling
+ ======================= ==========================================
+
+Note
+------
+ The EVT_SCROLL_THUMBRELEASE event is only emitted when actually
+ dragging the thumb using the mouse and releasing it (This
+ EVT_SCROLL_THUMBRELEASE event is also followed by an
+ EVT_SCROLL_ENDSCROLL event).
+
+ The EVT_SCROLL_ENDSCROLL event also occurs when using the keyboard
+ to change the thumb position, and when clicking next to the thumb
+ (In all these cases the EVT_SCROLL_THUMBRELEASE event does not
+ happen).
+
+ In short, the EVT_SCROLL_ENDSCROLL event is triggered when
+ scrolling/ moving has finished. The only exception (unfortunately)
+ is that changing the thumb position using the mousewheel does give
+ a EVT_SCROLL_THUMBRELEASE event but NOT an EVT_SCROLL_ENDSCROLL
+ event.
+");
+
class wxScrollEvent : public wxCommandEvent
{
public:
- wxScrollEvent(wxEventType commandType = wxEVT_NULL,
- int winid = 0, int pos = 0, int orient = 0);
-
- int GetOrientation() const;
- int GetPosition() const;
+ DocCtorStr(
+ wxScrollEvent(wxEventType commandType = wxEVT_NULL,
+ int winid = 0, int pos = 0, int orient = 0),
+ "", "");
+
+ DocDeclStr(
+ int , GetOrientation() const,
+ "Returns wx.HORIZONTAL or wx.VERTICAL, depending on the orientation of
+the scrollbar.", "");
+
+ DocDeclStr(
+ int , GetPosition() const,
+ "Returns the position of the scrollbar.", "");
+
void SetOrientation(int orient);
void SetPosition(int pos);
};
//---------------------------------------------------------------------------
%newgroup;
-// ScrollWin event class, derived fom wxEvent. wxScrollWinEvents
-// are sent by wxWindow.
+DocStr(wxScrollWinEvent,
+"A wx.ScrollWinEvent holds information about scrolling and is sent from
+scrolling windows.", "
+
+Events
+-------
+ ========================== ==========================================
+ EVT_SCROLLWIN Used to bind all scrolled window scroll events
+ EVT_SCROLLWIN_TOP scroll-to-top events (minimum position)
+ EVT_SCROLLWIN_BOTTOM scroll-to-bottom events (maximum position)
+ EVT_SCROLLWIN_LINEUP line up events
+ EVT_SCROLLWIN_LINEDOWN line down events
+ EVT_SCROLLWIN_PAGEUP page up events
+ EVT_SCROLLWIN_PAGEDOWN page down events
+ EVT_SCROLLWIN_THUMBTRACK thumbtrack events (frequent events sent
+ as the user drags the 'thumb')
+ EVT_SCROLLWIN_THUMBRELEASE thumb release events.
+ EVT_SCROLLWIN_ENDSCROLL End of scrolling
+ ========================== ==========================================
+
+:see: `wx.ScrollEvent`
+");
+
class wxScrollWinEvent : public wxEvent
{
public:
wxScrollWinEvent(wxEventType commandType = wxEVT_NULL,
int pos = 0, int orient = 0);
- int GetOrientation() const;
- int GetPosition() const;
+ DocDeclStr(
+ int , GetOrientation() const,
+ "Returns wx.HORIZONTAL or wx.VERTICAL, depending on the orientation of
+the scrollbar.", "");
+
+ DocDeclStr(
+ int , GetPosition() const,
+ "Returns the position of the scrollbar for the thumb track and release
+events. Note that this field can't be used for the other events, you
+need to query the window itself for the current position in that case.", "");
+
void SetOrientation(int orient);
void SetPosition(int pos);
};
//---------------------------------------------------------------------------
%newgroup;
+
+DocStr(wxMouseEvent,
+"This event class contains information about the events generated by
+the mouse: they include mouse buttons press and release events and
+mouse move events.
+
+All mouse events involving the buttons use ``wx.MOUSE_BTN_LEFT`` for
+the left mouse button, ``wx.MOUSE_BTN_MIDDLE`` for the middle one and
+``wx.MOUSE_BTN_RIGHT`` for the right one. Note that not all mice have
+a middle button so a portable application should avoid relying on the
+events from it.
+
+Note the difference between methods like `LeftDown` and `LeftIsDown`:
+the former returns true when the event corresponds to the left mouse
+button click while the latter returns true if the left mouse button is
+currently being pressed. For example, when the user is dragging the
+mouse you can use `LeftIsDown` to test whether the left mouse button
+is (still) depressed. Also, by convention, if `LeftDown` returns true,
+`LeftIsDown` will also return true in wxWidgets whatever the
+underlying GUI behaviour is (which is platform-dependent). The same
+applies, of course, to other mouse buttons as well.", "
+
+Events
+-------
+ ================== ==============================================
+ EVT_LEFT_DOWN Left mouse button down event. The handler
+ of this event should normally call
+ event.Skip() to allow the default processing
+ to take place as otherwise the window under
+ mouse wouldn't get the focus.
+ EVT_LEFT_UP Left mouse button up event
+ EVT_LEFT_DCLICK Left mouse button double click event
+ EVT_MIDDLE_DOWN Middle mouse button down event
+ EVT_MIDDLE_UP Middle mouse button up event
+ EVT_MIDDLE_DCLICK Middle mouse button double click event
+ EVT_RIGHT_DOWN Right mouse button down event
+ EVT_RIGHT_UP Right mouse button up event
+ EVT_RIGHT_DCLICK Right mouse button double click event
+ EVT_MOTION Event sent when the mouse is moving
+ EVT_ENTER_WINDOW Event sent when the mouse enters the
+ boundaries of a window.
+ EVT_LEAVE_WINDOW Sent when the mouse leaves the window's bounds
+ EVT_MOUSEWHEEL Mouse scroll wheel event
+ EVT_MOUSE_EVENTS Binds all mouse events at once.
+ ================== ==============================================
+
+");
+
+
// the symbolic names for the mouse buttons
enum
{
class wxMouseEvent : public wxEvent
{
public:
- wxMouseEvent(wxEventType mouseType = wxEVT_NULL);
-
- // Was it a button event? (*doesn't* mean: is any button *down*?)
- bool IsButton() const;
+ DocCtorStr(
+ wxMouseEvent(wxEventType mouseType = wxEVT_NULL),
+"Constructs a wx.MouseEvent. Valid event types are:
+
+ * wxEVT_ENTER_WINDOW
+ * wxEVT_LEAVE_WINDOW
+ * wxEVT_LEFT_DOWN
+ * wxEVT_LEFT_UP
+ * wxEVT_LEFT_DCLICK
+ * wxEVT_MIDDLE_DOWN
+ * wxEVT_MIDDLE_UP
+ * wxEVT_MIDDLE_DCLICK
+ * wxEVT_RIGHT_DOWN
+ * wxEVT_RIGHT_UP
+ * wxEVT_RIGHT_DCLICK
+ * wxEVT_MOTION
+ * wxEVT_MOUSEWHEEL ", "");
+
+
+ DocDeclStr(
+ bool , IsButton() const,
+ "Returns true if the event was a mouse button event (not necessarily a
+button down event - that may be tested using `ButtonDown`).", "");
+
- // Was it a down event from this (or any) button?
- bool ButtonDown(int but = wxMOUSE_BTN_ANY) const;
+ DocDeclStr(
+ bool , ButtonDown(int but = wxMOUSE_BTN_ANY) const,
+ "If the argument is omitted, this returns true if the event was any
+mouse button down event. Otherwise the argument specifies which
+button-down event shold be checked for (see `Button` for the possible
+values).", "");
+
- // Was it a dclick event from this (or any) button?
- bool ButtonDClick(int but = wxMOUSE_BTN_ANY) const;
+ DocDeclStr(
+ bool , ButtonDClick(int but = wxMOUSE_BTN_ANY) const,
+ "If the argument is omitted, this returns true if the event was any
+mouse double click event. Otherwise the argument specifies which
+double click event to check for (see `Button` for the possible
+values).", "");
+
- // Was it a up event from this (or any) button?
- bool ButtonUp(int but = wxMOUSE_BTN_ANY) const;
+ DocDeclStr(
+ bool , ButtonUp(int but = wxMOUSE_BTN_ANY) const,
+ "If the argument is omitted, this returns true if the event was any
+mouse button up event. Otherwise the argument specifies which button
+up event to check for (see `Button` for the possible values).", "");
+
- // Was the given button changing state?
- bool Button(int but) const;
+ DocDeclStr(
+ bool , Button(int button) const,
+ "Returns true if the identified mouse button is changing state. Valid
+values of button are:
+
+ ==================== =====================================
+ wx.MOUSE_BTN_LEFT check if left button was pressed
+ wx.MOUSE_BTN_MIDDLE check if middle button was pressed
+ wx.MOUSE_BTN_RIGHT check if right button was pressed
+ wx.MOUSE_BTN_ANY check if any button was pressed
+ ==================== =====================================
+", "");
+
// Was the given button in Down state?
bool ButtonIsDown(int but) const;
- // Get the button which is changing state (wxMOUSE_BTN_NONE if none)
- int GetButton() const;
+ DocDeclStr(
+ int , GetButton() const,
+ "Returns the mouse button which generated this event or
+wx.MOUSE_BTN_NONE if no button is involved (for mouse move, enter or
+leave event, for example). Otherwise wx.MOUSE_BTN_LEFT is returned for
+the left button down, up and double click events, wx.MOUSE_BTN_MIDDLE
+and wx.MOUSE_BTN_RIGHT for the same events for the middle and the
+right buttons respectively.", "");
+
- // Find state of shift/control keys
- bool ControlDown() const;
- bool MetaDown() const;
- bool AltDown() const;
- bool ShiftDown() const;
+ DocDeclStr(
+ bool , ControlDown() const,
+ "Returns true if the control key was down at the time of the event.", "");
+
+ DocDeclStr(
+ bool , MetaDown() const,
+ "Returns true if the Meta key was down at the time of the event.", "");
+
+
+ DocDeclStr(
+ bool , AltDown() const,
+ "Returns true if the Alt key was down at the time of the event.", "");
+
+ DocDeclStr(
+ bool , ShiftDown() const,
+ "Returns true if the Shift key was down at the time of the event.", "");
+
- // Find which event was just generated
- bool LeftDown() const;
- bool MiddleDown() const;
- bool RightDown() const;
+ DocDeclStr(
+ bool , CmdDown() const,
+ "\"Cmd\" is a pseudo key which is the same as Control for PC and Unix
+platforms but the special \"Apple\" (a.k.a as \"Command\") key on
+Macs. It often makes sense to use it instead of, say, `ControlDown`
+because Cmd key is used for the same thing under Mac as Ctrl
+elsewhere. The Ctrl key still exists, it's just not used for this
+purpose. So for non-Mac platforms this is the same as `ControlDown`
+and Macs this is the same as `MetaDown`.", "");
+
- bool LeftUp() const;
- bool MiddleUp() const;
- bool RightUp() const;
+ DocDeclStr(
+ bool , LeftDown() const,
+ "Returns true if the left mouse button state changed to down.", "");
+
+ DocDeclStr(
+ bool , MiddleDown() const,
+ "Returns true if the middle mouse button state changed to down.", "");
+
+ DocDeclStr(
+ bool , RightDown() const,
+ "Returns true if the right mouse button state changed to down.", "");
+
- bool LeftDClick() const;
- bool MiddleDClick() const;
- bool RightDClick() const;
+
+ DocDeclStr(
+ bool , LeftUp() const,
+ "Returns true if the left mouse button state changed to up.", "");
+
+ DocDeclStr(
+ bool , MiddleUp() const,
+ "Returns true if the middle mouse button state changed to up.", "");
+
+ DocDeclStr(
+ bool , RightUp() const,
+ "Returns true if the right mouse button state changed to up.", "");
+
- // Find the current state of the mouse buttons (regardless
- // of current event type)
- bool LeftIsDown();
- bool MiddleIsDown();
- bool RightIsDown();
- // True if a button is down and the mouse is moving
- bool Dragging() const;
+
+ DocDeclStr(
+ bool , LeftDClick() const,
+ "Returns true if the event was a left button double click.", "");
+
+ DocDeclStr(
+ bool , MiddleDClick() const,
+ "Returns true if the event was a middle button double click.", "");
+
+ DocDeclStr(
+ bool , RightDClick() const,
+ "Returns true if the event was a right button double click.", "");
+
- // True if the mouse is moving, and no button is down
- bool Moving() const;
+
+ DocDeclStr(
+ bool , LeftIsDown(),
+ "Returns true if the left mouse button is currently down, independent
+of the current event type.
+
+Please notice that it is not the same as LeftDown which returns true
+if the left mouse button was just pressed. Rather, it describes the
+state of the mouse button before the event happened.
+
+This event is usually used in the mouse event handlers which process
+\"move mouse\" messages to determine whether the user is (still)
+dragging the mouse.", "");
+
+ DocDeclStr(
+ bool , MiddleIsDown(),
+ "Returns true if the middle mouse button is currently down, independent
+of the current event type.", "");
+
+ DocDeclStr(
+ bool , RightIsDown(),
+ "Returns true if the right mouse button is currently down, independent
+of the current event type.", "");
+
+
+
+ DocDeclStr(
+ bool , Dragging() const,
+ "Returns true if this was a dragging event (motion while a button is
+depressed).", "");
+
+
+ DocDeclStr(
+ bool , Moving() const,
+ "Returns true if this was a motion event and no mouse buttons were
+pressed. If any mouse button is held pressed, then this method returns
+false and Dragging returns true.", "");
+
- // True if the mouse is just entering the window
- bool Entering() const;
+ DocDeclStr(
+ bool , Entering() const,
+ "Returns true if the mouse was entering the window.", "");
+
- // True if the mouse is just leaving the window
- bool Leaving() const;
+ DocDeclStr(
+ bool , Leaving() const,
+ "Returns true if the mouse was leaving the window.", "");
+
DocStr(GetPosition, // sets the docstring for both
- "Returns the position of the mouse in window coordinates when the event happened.");
+ "Returns the pixel position of the mouse in window coordinates when the
+event happened.", "");
wxPoint GetPosition();
DocDeclAName(
"GetPositionTuple() -> (x,y)",
GetPositionTuple);
- // Find the logical position of the event given the DC
- wxPoint GetLogicalPosition(const wxDC& dc) const;
-
- // Get X position
- wxCoord GetX() const;
+ DocDeclStr(
+ wxPoint , GetLogicalPosition(const wxDC& dc) const,
+ "Returns the logical mouse position in pixels (i.e. translated
+according to the translation set for the DC, which usually indicates
+that the window has been scrolled).", "");
+
- // Get Y position
- wxCoord GetY() const;
+ DocDeclStr(
+ wxCoord , GetX() const,
+ "Returns X coordinate of the physical mouse event position.", "");
+
+ DocDeclStr(
+ wxCoord , GetY() const,
+ "Returns Y coordinate of the physical mouse event position.", "");
+
- // Get wheel rotation, positive or negative indicates direction of
- // rotation. Current devices all send an event when rotation is equal to
- // +/-WheelDelta, but this allows for finer resolution devices to be
- // created in the future. Because of this you shouldn't assume that one
- // event is equal to 1 line or whatever, but you should be able to either
- // do partial line scrolling or wait until +/-WheelDelta rotation values
- // have been accumulated before scrolling.
- int GetWheelRotation() const;
+ DocDeclStr(
+ int , GetWheelRotation() const,
+ "Get wheel rotation, positive or negative indicates direction of
+rotation. Current devices all send an event when rotation is equal to
++/-WheelDelta, but this allows for finer resolution devices to be
+created in the future. Because of this you shouldn't assume that one
+event is equal to 1 line or whatever, but you should be able to either
+do partial line scrolling or wait until +/-WheelDelta rotation values
+have been accumulated before scrolling.", "");
+
- // Get wheel delta, normally 120. This is the threshold for action to be
- // taken, and one such action (for example, scrolling one increment)
- // should occur for each delta.
- int GetWheelDelta() const;
+ DocDeclStr(
+ int , GetWheelDelta() const,
+ "Get wheel delta, normally 120. This is the threshold for action to be
+taken, and one such action (for example, scrolling one increment)
+should occur for each delta.", "");
+
- // Returns the configured number of lines (or whatever) to be scrolled per
- // wheel action. Defaults to one.
- int GetLinesPerAction() const;
+ DocDeclStr(
+ int , GetLinesPerAction() const,
+ "Returns the configured number of lines (or whatever) to be scrolled
+per wheel action. Defaults to three.", "");
+
- // Is the system set to do page scrolling?
- bool IsPageScroll() const;
+ DocDeclStr(
+ bool , IsPageScroll() const,
+ "Returns true if the system has been setup to do page scrolling with
+the mouse wheel instead of line scrolling.", "");
+
public:
wxCoord m_x, m_y;
%newgroup;
// Cursor set event
+
+DocStr(wxSetCursorEvent,
+"A SetCursorEvent is generated when the mouse cursor is about to be set
+as a result of mouse motion. This event gives the application the
+chance to perform specific mouse cursor processing based on the
+current position of the mouse within the window. Use the `SetCursor`
+method to specify the cursor you want to be displayed.", "");
+
class wxSetCursorEvent : public wxEvent
{
public:
- wxSetCursorEvent(wxCoord x = 0, wxCoord y = 0);
+ DocCtorStr(
+ wxSetCursorEvent(wxCoord x = 0, wxCoord y = 0),
+ "Construct a new `wx.SetCursorEvent`.", "");
- wxCoord GetX() const;
- wxCoord GetY() const;
+ DocDeclStr(
+ wxCoord , GetX() const,
+ "Returns the X coordinate of the mouse in client coordinates.", "");
+
+ DocDeclStr(
+ wxCoord , GetY() const,
+ "Returns the Y coordinate of the mouse in client coordinates.", "");
+
- void SetCursor(const wxCursor& cursor);
- const wxCursor& GetCursor() const;
- bool HasCursor() const;
+ DocDeclStr(
+ void , SetCursor(const wxCursor& cursor),
+ "Sets the cursor associated with this event.", "");
+
+ DocDeclStr(
+ const wxCursor& , GetCursor() const,
+ "Returns a reference to the cursor specified by this event.", "");
+
+ DocDeclStr(
+ bool , HasCursor() const,
+ "Returns true if the cursor specified by this event is a valid cursor.", "");
+
};
//---------------------------------------------------------------------------
// Keyboard input event class
+DocStr(wxKeyEvent,
+"This event class contains information about keypress and character
+events. These events are only sent to the widget that currently has
+the keyboard focus.
+
+Notice that there are three different kinds of keyboard events in
+wxWidgets: key down and up events and char events. The difference
+between the first two is clear - the first corresponds to a key press
+and the second to a key release - otherwise they are identical. Just
+note that if the key is maintained in a pressed state you will
+typically get a lot of (automatically generated) down events but only
+one up so it is wrong to assume that there is one up event
+corresponding to each down one.
+
+Both key events provide untranslated key codes while the char event
+carries the translated one. The untranslated code for alphanumeric
+keys is always an upper case value. For the other keys it is one of
+WXK_XXX values from the keycodes table. The translated key is, in
+general, the character the user expects to appear as the result of the
+key combination when typing the text into a text entry zone, for
+example.
+
+A few examples to clarify this (all assume that CAPS LOCK is unpressed
+and the standard US keyboard): when the 'A' key is pressed, the key
+down event key code is equal to ASCII A == 65. But the char event key
+code is ASCII a == 97. On the other hand, if you press both SHIFT and
+'A' keys simultaneously , the key code in key down event will still be
+just 'A' while the char event key code parameter will now be 'A' as
+well.
+
+Although in this simple case it is clear that the correct key code
+could be found in the key down event handler by checking the value
+returned by `ShiftDown`, in general you should use EVT_CHAR for this
+as for non alphanumeric keys or non-US keyboard layouts the
+translation is keyboard-layout dependent and can only be done properly
+by the system itself.
+
+Another kind of translation is done when the control key is pressed:
+for example, for CTRL-A key press the key down event still carries the
+same key code 'A' as usual but the char event will have key code of 1,
+the ASCII value of this key combination.
+
+You may discover how the other keys on your system behave
+interactively by running the KeyEvents sample in the wxPython demo and
+pressing some keys while the blue box at the top has the keyboard
+focus.
+
+**Note**: If a key down event is caught and the event handler does not
+call event.Skip() then the coresponding char event will not
+happen. This is by design and enables the programs that handle both
+types of events to be a bit simpler.
+
+**Note for Windows programmers**: The key and char events in wxWidgets
+are similar to but slightly different from Windows WM_KEYDOWN and
+WM_CHAR events. In particular, Alt-x combination will generate a char
+event in wxWidgets (unless it is used as an accelerator).
+
+**Tip**: be sure to call event.Skip() for events that you don't
+process in key event function, otherwise menu shortcuts may cease to
+work under Windows.
+", "
+
+Events
+------
+ ================== ==============================================
+ wx.EVT_KEY_DOWN Sent when a keyboard key has been pressed
+ wx.EVT_KEY_UP Sent when a keyboard key has been released
+ wx.EVT_CHAR Sent for translated character events.
+ ================== ==============================================
+
+
+Keycode Table
+-------------
+ =========== ============== ======== ==================== =================
+ WXK_BACK WXK_EXECUTE WXK_F1 WXK_NUMPAD_SPACE WXK_WINDOWS_LEFT
+ WXK_TAB WXK_SNAPSHOT WXK_F2 WXK_NUMPAD_TAB WXK_WINDOWS_RIGHT
+ WXK_RETURN WXK_INSERT WXK_F3 WXK_NUMPAD_ENTER WXK_WINDOWS_MENU
+ WXK_ESCAPE WXK_HELP WXK_F4 WXK_NUMPAD_F1 WXK_SPECIAL1
+ WXK_SPACE WXK_NUMPAD0 WXK_F5 WXK_NUMPAD_F2 WXK_SPECIAL2
+ WXK_DELETE WXK_NUMPAD1 WXK_F6 WXK_NUMPAD_F3 WXK_SPECIAL3
+ WXK_LBUTTON WXK_NUMPAD2 WXK_F7 WXK_NUMPAD_F4 WXK_SPECIAL4
+ WXK_RBUTTON WXK_NUMPAD3 WXK_F8 WXK_NUMPAD_HOME WXK_SPECIAL5
+ WXK_CANCEL WXK_NUMPAD4 WXK_F9 WXK_NUMPAD_LEFT WXK_SPECIAL6
+ WXK_MBUTTON WXK_NUMPAD5 WXK_F10 WXK_NUMPAD_UP WXK_SPECIAL7
+ WXK_CLEAR WXK_NUMPAD6 WXK_F11 WXK_NUMPAD_RIGHT WXK_SPECIAL8
+ WXK_SHIFT WXK_NUMPAD7 WXK_F12 WXK_NUMPAD_DOWN WXK_SPECIAL9
+ WXK_ALT WXK_NUMPAD8 WXK_F13 WXK_NUMPAD_PRIOR WXK_SPECIAL10
+ WXK_CONTROL WXK_NUMPAD9 WXK_F14 WXK_NUMPAD_PAGEUP WXK_SPECIAL11
+ WXK_MENU WXK_MULTIPLY WXK_F15 WXK_NUMPAD_NEXT WXK_SPECIAL12
+ WXK_PAUSE WXK_ADD WXK_F16 WXK_NUMPAD_PAGEDOWN WXK_SPECIAL13
+ WXK_CAPITAL WXK_SEPARATOR WXK_F17 WXK_NUMPAD_END WXK_SPECIAL14
+ WXK_PRIOR WXK_SUBTRACT WXK_F18 WXK_NUMPAD_BEGIN WXK_SPECIAL15
+ WXK_NEXT WXK_DECIMAL WXK_F19 WXK_NUMPAD_INSERT WXK_SPECIAL16
+ WXK_END WXK_DIVIDE WXK_F20 WXK_NUMPAD_DELETE WXK_SPECIAL17
+ WXK_HOME WXK_NUMLOCK WXK_F21 WXK_NUMPAD_EQUAL WXK_SPECIAL18
+ WXK_LEFT WXK_SCROLL WXK_F22 WXK_NUMPAD_MULTIPLY WXK_SPECIAL19
+ WXK_UP WXK_PAGEUP WXK_F23 WXK_NUMPAD_ADD WXK_SPECIAL20
+ WXK_RIGHT WXK_PAGEDOWN WXK_F24 WXK_NUMPAD_SEPARATOR
+ WXK_DOWN WXK_NUMPAD_SUBTRACT
+ WXK_SELECT WXK_NUMPAD_DECIMAL
+ WXK_PRINT WXK_NUMPAD_DIVIDE
+ =========== ============== ======== ==================== =================
+");
+
class wxKeyEvent : public wxEvent
{
public:
- wxKeyEvent(wxEventType keyType = wxEVT_NULL);
+ DocCtorStr(
+ wxKeyEvent(wxEventType eventType = wxEVT_NULL),
+ "Construct a new `wx.KeyEvent`. Valid event types are:
+ * ", "");
- // Find state of shift/control keys
- bool ControlDown() const;
- bool MetaDown() const;
- bool AltDown() const;
- bool ShiftDown() const;
- // exclude MetaDown() from HasModifiers() because NumLock under X is often
- // configured as mod2 modifier, yet the key events even when it is pressed
- // should be processed normally, not like Ctrl- or Alt-key
- bool HasModifiers() const;
+ DocDeclStr(
+ bool , ControlDown() const,
+ "Returns ``True`` if the Control key was down at the time of the event.", "");
+
+ DocDeclStr(
+ bool , MetaDown() const,
+ "Returns ``True`` if the Meta key was down at the time of the event.", "");
+
+ DocDeclStr(
+ bool , AltDown() const,
+ "Returns ``True`` if the Alt key was down at the time of the event.", "");
+
+ DocDeclStr(
+ bool , ShiftDown() const,
+ "Returns ``True`` if the Shift key was down at the time of the event.", "");
+
+
+ DocDeclStr(
+ bool , CmdDown() const,
+ "\"Cmd\" is a pseudo key which is the same as Control for PC and Unix
+platforms but the special \"Apple\" (a.k.a as \"Command\") key on
+Macs. It makes often sense to use it instead of, say, `ControlDown`
+because Cmd key is used for the same thing under Mac as Ctrl
+elsewhere. The Ctrl still exists, it's just not used for this
+purpose. So for non-Mac platforms this is the same as `ControlDown`
+and Macs this is the same as `MetaDown`.", "");
+
+
+
+ DocDeclStr(
+ bool , HasModifiers() const,
+ "Returns true if either CTRL or ALT keys was down at the time of the
+key event. Note that this function does not take into account neither
+SHIFT nor META key states (the reason for ignoring the latter is that
+it is common for NUMLOCK key to be configured as META under X but the
+key presses even while NUMLOCK is on should be still processed
+normally).", "");
+
- // get the key code: an ASCII7 char or an element of wxKeyCode enum
- int GetKeyCode() const;
+ DocDeclStr(
+ int , GetKeyCode() const,
+ "Returns the virtual key code. ASCII events return normal ASCII values,
+while non-ASCII events return values such as WXK_LEFT for the left
+cursor key. See `wx.KeyEvent` for a full list of the virtual key
+codes.
+
+Note that in Unicode build, the returned value is meaningful only if
+the user entered a character that can be represented in current
+locale's default charset. You can obtain the corresponding Unicode
+character using `GetUnicodeKey`.", "");
%pythoncode { KeyCode = GetKeyCode }
+
%extend {
- int GetUniChar() {
+ DocStr(
+ GetUnicodeKey,
+ "Returns the Unicode character corresponding to this key event. This
+function is only meaningfule in a Unicode build of wxPython.", "");
+ int GetUnicodeKey() {
%#if wxUSE_UNICODE
- return self->m_uniChar;
+ return self->GetUnicodeKey();
%#else
return 0;
%#endif
}
}
+ %pythoncode { GetUniChar = GetUnicodeKey }
+
+
+ DocDeclStr(
+ wxUint32 , GetRawKeyCode() const,
+ "Returns the raw key code for this event. This is a platform-dependent
+scan code which should only be used in advanced
+applications. Currently the raw key codes are not supported by all
+ports.", "");
- // get the raw key code (platform-dependent)
- wxUint32 GetRawKeyCode() const;
- // get the raw key flags (platform-dependent)
- wxUint32 GetRawKeyFlags() const;
+ DocDeclStr(
+ wxUint32 , GetRawKeyFlags() const,
+ "Returns the low level key flags for this event. The flags are
+platform-dependent and should only be used in advanced applications.
+Currently the raw key flags are not supported by all ports.", "");
+
DocStr(GetPosition, // sets the docstring for both
- "Find the position of the event.");
+ "Find the position of the event, if applicable.", "");
wxPoint GetPosition();
DocDeclAName(
"GetPositionTuple() -> (x,y)",
GetPositionTuple);
- // Get X position
- wxCoord GetX() const;
+
+ DocDeclStr(
+ wxCoord , GetX() const,
+ "Returns the X position (in client coordinates) of the event, if
+applicable.", "");
+
- // Get Y position
- wxCoord GetY() const;
+ DocDeclStr(
+ wxCoord , GetY() const,
+ "Returns the Y position (in client coordinates) of the event, if
+applicable.", "");
+
public:
wxCoord m_x, m_y;
bool m_metaDown;
bool m_scanCode;
- // these fields contain the platform-specific information about
- // key that was pressed
wxUint32 m_rawCode;
wxUint32 m_rawFlags;
};
%newgroup;
// Size event class
+
+DocStr(wxSizeEvent,
+"A size event holds information about size change events. The EVT_SIZE
+handler function will be called when the window it is bound to has
+been resized.
+
+Note that the size passed is of the whole window: call
+`wx.Window.GetClientSize` for the area which may be used by the
+application.
+
+When a window is resized, usually only a small part of the window is
+damaged and and that area is all that is in the update region for the
+next paint event. However, if your drawing depends on the size of the
+window, you may need to clear the DC explicitly and repaint the whole
+window. In which case, you may need to call `wx.Window.Refresh` to
+invalidate the entire window.
+", "");
+
class wxSizeEvent : public wxEvent
{
public:
- wxSizeEvent(const wxSize& sz=wxDefaultSize, int winid = 0);
-
- wxSize GetSize() const;
+ DocCtorStr(
+ wxSizeEvent(const wxSize& sz=wxDefaultSize, int winid = 0),
+ "Construct a new ``wx.SizeEvent``.", "");
+
+ DocDeclStr(
+ wxSize , GetSize() const,
+ "Returns the entire size of the window generating the size change
+event.", "");
+
wxRect GetRect() const;
void SetRect(wxRect rect);
+
%extend {
void SetSize(wxSize size) {
self->m_size = size;
public:
wxSize m_size;
- wxRect m_rect; // Used for wxEVT_SIZING
+ wxRect m_rect;
};
//---------------------------------------------------------------------------
%newgroup;
-// Move event class
+DocStr(wxMoveEvent,
+"This event object is sent for EVT_MOVE event bindings when a window is
+moved to a new position.", "");
+
class wxMoveEvent : public wxEvent
{
public:
- wxMoveEvent(const wxPoint& pos=wxDefaultPosition, int winid = 0);
+ DocCtorStr(
+ wxMoveEvent(const wxPoint& pos=wxDefaultPosition, int winid = 0),
+ "Constructor.", "");
- wxPoint GetPosition() const;
+ DocDeclStr(
+ wxPoint , GetPosition() const,
+ "Returns the position of the window generating the move change event.", "");
+
wxRect GetRect() const;
- void SetRect(wxRect rect);
- %extend {
- void SetPosition(wxPoint pos) {
- self->m_pos = pos;
- }
- }
+ void SetRect(const wxRect& rect);
+ void SetPosition(const wxPoint& pos);
- wxPoint m_pos;
- wxRect m_rect;
+ %pythoncode {
+ m_pos = property(GetPosition, SetPosition)
+ m_rect = property(GetRect, SetRect)
+ }
};
//---------------------------------------------------------------------------
%newgroup;
-// Paint event class
+DocStr(wxPaintEvent,
+"A paint event is sent when a window's contents needs to be repainted.
+Note that in an EVT_PAINT handler the application must *always* create
+a `wx.PaintDC` object, even if you do not use it. Otherwise MS
+Windows assumes that the window has not been painted yet and will send
+the event again, causing endless refreshes.
+
+You can optimize painting by retrieving the rectangles that have been
+damaged using `wx.Window.GetUpdateRegion` and/or `wx.RegionIterator`,
+and only repainting these rectangles. The rectangles are in terms of
+the client area, and are unscrolled, so you will need to do some
+calculations using the current view position to obtain logical,
+scrolled units.
+", "");
+
class wxPaintEvent : public wxEvent
{
public:
- wxPaintEvent(int Id = 0);
+ DocCtorStr(
+ wxPaintEvent(int Id = 0),
+ "", "");
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxEraseEvent,
+"An erase event is sent whenever the background of a window needs to be
+repainted. To intercept this event use the EVT_ERASE_BACKGROUND event
+binder. On some platforms, such as GTK+, this event is simulated
+(simply generated just before the paint event) and may cause flicker.
+
+To paint a custom background use the `GetDC` method and use the returned
+device context if it is not ``None``, otherwise create a temporary
+`wx.ClientDC` and draw on that.
+", "");
+
class wxEraseEvent : public wxEvent
{
public:
- wxEraseEvent(int Id = 0, wxDC *dc = (wxDC *) NULL);
-
- wxDC *GetDC() const;
+ DocCtorStr(
+ wxEraseEvent(int Id = 0, wxDC *dc = NULL),
+ "Constructor", "");
+
+ DocDeclStr(
+ wxDC *, GetDC() const,
+ "Returns the device context the event handler should draw upon. If
+``None`` is returned then create a temporary `wx.ClientDC` and use
+that instead.", "");
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxFocusEvent,
+"A focus event is sent when a window's focus changes. The window losing
+focus receives an EVT_KILL_FOCUS event while the window gaining it
+gets an EVT_SET_FOCUS event.
+
+Notice that the set focus event happens both when the user gives focus
+to the window (whether using the mouse or keyboard) and when it is
+done from the program itself using `wx.Window.SetFocus`.
+", "");
+
class wxFocusEvent : public wxEvent
{
public:
- wxFocusEvent(wxEventType type = wxEVT_NULL, int winid = 0);
+ DocCtorStr(
+ wxFocusEvent(wxEventType type = wxEVT_NULL, int winid = 0),
+ "Constructor", "");
- // The window associated with this event is the window which had focus
- // before for SET event and the window which will have focus for the KILL
- // one. NB: it may be NULL in both cases!
- wxWindow *GetWindow() const;
+ DocDeclStr(
+ wxWindow *, GetWindow() const,
+ "Returns the other window associated with this event, that is the
+window which had the focus before for the EVT_SET_FOCUS event and the
+window which is going to receive focus for the wxEVT_KILL_FOCUS event.
+
+Warning: the window returned may be None!", "");
+
void SetWindow(wxWindow *win);
};
//---------------------------------------------------------------------------
%newgroup;
-// wxChildFocusEvent notifies the parent that a child has got the focus: unlike
-// wxFocusEvent it is propagated upwards the window chain
+DocStr(wxChildFocusEvent,
+"wx.ChildFocusEvent notifies the parent that a child has received the
+focus. Unlike `wx.FocusEvent` it is propagated up the window
+heirarchy.", "");
+
+
class wxChildFocusEvent : public wxCommandEvent
{
public:
- wxChildFocusEvent(wxWindow *win = NULL);
+ DocCtorStr(
+ wxChildFocusEvent(wxWindow *win = NULL),
+ "Constructor", "");
- wxWindow *GetWindow() const;
+ DocDeclStr(
+ wxWindow *, GetWindow() const,
+ "The window which has just received the focus.", "");
+
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxActivateEvent,
+"An activate event is sent when a top-level window or the entire
+application is being activated or deactivated.
+
+A top-level window (a dialog or frame) receives an activate event when
+is being activated or deactivated. This is indicated visually by the
+title bar changing colour, and a subwindow gaining the keyboard focus.
+An application is activated or deactivated when one of its frames
+becomes activated, or a frame becomes inactivate resulting in all
+application frames being inactive.
+
+Please note that usually you should call event.Skip() in your handlers
+for these events so the default handlers will still be called, as not
+doing so can result in strange effects.
+", "
+
+Events
+-------
+ ======================= ==========================================
+ wx.EVT_ACTIVATE Sent to a frame when it has been activated
+ or deactivated.
+ wx.EVT_ACTIVATE_APP Sent to the app object when its activation
+ state changes.
+ ======================= ==========================================
+");
+
+
class wxActivateEvent : public wxEvent
{
public:
- wxActivateEvent(wxEventType type = wxEVT_NULL, bool active = True, int Id = 0);
- bool GetActive() const;
+ DocCtorStr(
+ wxActivateEvent(wxEventType type = wxEVT_NULL, bool active = true, int Id = 0),
+ "Constructor", "");
+
+ DocDeclStr(
+ bool , GetActive() const,
+ "Returns true if the application or window is being activated, false
+otherwise.", "");
+
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxInitDialogEvent,
+"A wx.InitDialogEvent is sent as a dialog is being initialised, or for
+any window when `wx.Window.InitDialog` is called. Handlers for this
+event can transfer data to the window, or anything else that should be
+done before the user begins editing the form. The default handler
+calls `wx.Window.TransferDataToWindow`.", "
+
+Events
+-------
+ ======================= ==========================================
+ wx.EVT_INIT_DIALOG Binder for init dialog events.
+ ======================= ==========================================
+");
+
class wxInitDialogEvent : public wxEvent
{
public:
- wxInitDialogEvent(int Id = 0);
+ DocCtorStr(
+ wxInitDialogEvent(int Id = 0),
+ "Constructor", "");
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxMenuEvent,
+"This class is used for a variety of menu-related events. Note that
+these do not include menu command events, which are handled by sending
+`wx.CommandEvent` objects.
+
+The default handler for wx.EVT_MENU_HIGHLIGHT displays menu item help
+text in the first field of the status bar.", "
+
+Events
+-------
+ ========================= ==========================================
+ wx.EVT_MENU_OPEN A menu is about to be opened. On Windows,
+ this is only sent once for each navigation
+ of the menubar (up until all menus have closed).
+ wx.EVT_MENU_CLOSE A menu has been just closed.
+ wx.EVT_MENU_HIGHLIGHT Sent when the menu item with the specified id
+ has been highlighted: used by default to show
+ help prompts in the `wx.Frame`'s status bar.
+ wx.EVT_MENU_HIGHLIGHT_ALL Can be used to catch the menu highlight
+ event for all menu items.
+ ========================= ==========================================
+");
+
class wxMenuEvent : public wxEvent
{
public:
- wxMenuEvent(wxEventType type = wxEVT_NULL, int winid = 0, wxMenu* menu = NULL);
+ DocCtorStr(
+ wxMenuEvent(wxEventType type = wxEVT_NULL, int winid = 0, wxMenu* menu = NULL),
+ "Constructor", "");
+
+ DocDeclStr(
+ int , GetMenuId() const,
+ "Returns the menu identifier associated with the event. This method
+should be only used with the HIGHLIGHT events.", "");
- // only for wxEVT_MENU_HIGHLIGHT
- int GetMenuId() const;
- // only for wxEVT_MENU_OPEN/CLOSE
- bool IsPopup() const;
+ DocDeclStr(
+ bool , IsPopup() const,
+ "Returns ``True`` if the menu which is being opened or closed is a
+popup menu, ``False`` if it is a normal one. This method should only
+be used with the OPEN and CLOSE events.", "");
+
- // only for wxEVT_MENU_OPEN/CLOSE
- wxMenu* GetMenu() const;
+ DocDeclStr(
+ wxMenu* , GetMenu() const,
+ "Returns the menu which is being opened or closed. This method should
+only be used with the OPEN and CLOSE events.", "");
+
};
//---------------------------------------------------------------------------
%newgroup;
-// Window close or session close event class
+DocStr(wxCloseEvent,
+"This event class contains information about window and session close
+events.
+
+The handler function for EVT_CLOSE is called when the user has tried
+to close a a frame or dialog box using the window manager controls or
+the system menu. It can also be invoked by the application itself
+programmatically, for example by calling the `wx.Window.Close`
+function.
+
+You should check whether the application is forcing the deletion of
+the window using `CanVeto`. If it returns ``False``, you must destroy
+the window using `wx.Window.Destroy`. If the return value is ``True``,
+it is up to you whether you respond by destroying the window or not.
+For example you may wish to display a message dialog prompting to save
+files or to cancel the close.
+
+If you don't destroy the window, you should call `Veto` to let the
+calling code know that you did not destroy the window. This allows the
+`wx.Window.Close` function to return ``True`` or ``False`` depending
+on whether the close instruction was honored or not.", "
+
+Events
+-------
+ ========================= ==========================================
+ wx.EVT_CLOSE This event is sent to a top-level window
+ when it has been requested to close either
+ from the user or programatically.
+ wx.EVT_QUERY_END_SESSION This event is sent to the `wx.App` when the
+ system is about to be logged off, giving the
+ app a chance to veto the shutdown.
+ wx.EVT_END_SESSION This event is sent to the `wx.App` when the
+ system is being logged off.
+ ========================= ==========================================
+");
+
class wxCloseEvent : public wxEvent
{
public:
- wxCloseEvent(wxEventType type = wxEVT_NULL, int winid = 0);
+ DocCtorStr(
+ wxCloseEvent(wxEventType type = wxEVT_NULL, int winid = 0),
+ "Constructor.", "");
+
+ DocDeclStr(
+ void , SetLoggingOff(bool logOff),
+ "Sets the 'logging off' flag.", "");
+
+ DocDeclStr(
+ bool , GetLoggingOff() const,
+ "Returns ``True`` if the user is logging off or ``False`` if the
+system is shutting down. This method can only be called for end
+session and query end session events, it doesn't make sense for close
+window event.", "");
- void SetLoggingOff(bool logOff);
- bool GetLoggingOff() const;
- void Veto(bool veto = True);
- void SetCanVeto(bool canVeto);
+ DocDeclStr(
+ void , Veto(bool veto = true),
+ "Call this from your event handler to veto a system shutdown or to
+signal to the calling application that a window close did not happen.
+
+You can only veto a shutdown or close if `CanVeto` returns true.", "");
- bool CanVeto() const;
bool GetVeto() const;
+
+ DocDeclStr(
+ void , SetCanVeto(bool canVeto),
+ "Sets the 'can veto' flag.", "");
+
+ DocDeclStr(
+ bool , CanVeto() const,
+ "Returns true if you can veto a system shutdown or a window close
+event. Vetoing a window close event is not possible if the calling
+code wishes to force the application to exit, and so this function
+must be called to check this.", "");
+
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxShowEvent,
+"An EVT_SHOW event is sent when a window is shown or hidden.", "");
+
class wxShowEvent : public wxEvent
{
public:
- wxShowEvent(int winid = 0, bool show = False);
+ wxShowEvent(int winid = 0, bool show = false);
void SetShow(bool show);
bool GetShow() const;
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxIconizeEvent,
+"An EVT_ICONIZE event is sent when a frame is iconized (minimized) or
+restored.", "");
+
class wxIconizeEvent: public wxEvent
{
public:
- wxIconizeEvent(int id = 0, bool iconized = True);
- bool Iconized();
+ wxIconizeEvent(int id = 0, bool iconized = true);
+
+ DocDeclStr(
+ bool , Iconized(),
+ "Returns ``True`` if the frame has been iconized, ``False`` if it has
+been restored.", "");
+
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxMaximizeEvent,
+"An EVT_MAXIMIZE event is sent when a frame is maximized or restored.", "");
+
class wxMaximizeEvent: public wxEvent
{
public:
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxDropFilesEvent,
+"This class is used for drop files events, that is, when files have
+been dropped onto the window. This functionality is only available
+under Windows. The window must have previously been enabled for
+dropping by calling `wx.Window.DragAcceptFiles`.
+
+Important note: this is a separate implementation to the more general
+drag and drop implementation using `wx.FileDropTarget`, and etc. This
+implementation uses the older, Windows message-based approach of
+dropping files.
+
+Use wx.EVT_DROP_FILES to bind an event handler to receive file drop
+events.
+", "");
+
class wxDropFilesEvent: public wxEvent
{
public:
- wxPoint GetPosition();
- int GetNumberOfFiles();
+
+ // TODO: wrap the ctor!
+
+
+ DocDeclStr(
+ wxPoint , GetPosition(),
+ "Returns the position at which the files were dropped.", "");
+
+ DocDeclStr(
+ int , GetNumberOfFiles(),
+ "Returns the number of files dropped.", "");
+
%extend {
+ DocStr(
+ GetFiles,
+ "Returns a list of the filenames that were dropped.", "");
+
PyObject* GetFiles() {
int count = self->GetNumberOfFiles();
wxString* files = self->GetFiles();
+ wxPyBlock_t blocked = wxPyBeginBlockThreads();
PyObject* list = PyList_New(count);
if (!list) {
PyErr_SetString(PyExc_MemoryError, "Can't allocate list of files!");
+ wxPyEndBlockThreads(blocked);
return NULL;
}
for (int i=0; i<count; i++) {
PyList_SetItem(list, i, wx2PyString(files[i]));
}
+ wxPyEndBlockThreads(blocked);
return list;
}
}
%newgroup;
-// Whether to always send update events to windows, or
-// to only send update events to those with the
-// wxWS_EX_PROCESS_UI_UPDATES style.
-
enum wxUpdateUIMode
{
- // Send UI update events to all windows
wxUPDATE_UI_PROCESS_ALL,
-
- // Send UI update events to windows that have
- // the wxWS_EX_PROCESS_UI_UPDATES flag specified
wxUPDATE_UI_PROCESS_SPECIFIED
};
+
+DocStr(wxUpdateUIEvent,
+"This class is used for EVT_UPDATE_UI pseudo-events which are sent by
+wxWidgets to give an application the chance to update various user
+interface elements.
+
+Without update UI events, an application has to work hard to
+check/uncheck, enable/disable, and set the text for elements such as
+menu items and toolbar buttons. The code for doing this has to be
+mixed up with the code that is invoked when an action is invoked for a
+menu item or button.
+
+With update UI events, you define an event handler to look at the
+state of the application and change UI elements accordingly. wxWidgets
+will call your handler functions in idle time, so you don't have to
+worry where to call this code. In addition to being a clearer and more
+declarative method, it also means you don't have to worry whether
+you're updating a toolbar or menubar identifier. The same handler can
+update a menu item and toolbar button, if the ID values are the same.
+
+Instead of directly manipulating the menu or button, you call
+functions in the event object, such as `Check`. wxWidgets will
+determine whether such a call has been made, and which UI element to
+update.
+
+These events will work for popup menus as well as menubars. Just
+before a menu is popped up, `wx.Menu.UpdateUI` is called to process
+any UI events for the window that owns the menu.
+
+If you find that the overhead of UI update processing is affecting
+your application, you can do one or both of the following:
+
+ 1. Call `wx.UpdateUIEvent.SetMode` with a value of
+ wx.UPDATE_UI_PROCESS_SPECIFIED, and set the extra style
+ wx.WS_EX_PROCESS_UPDATE_EVENTS for every window that should
+ receive update events. No other windows will receive update
+ events.
+
+ 2. Call `wx.UpdateUIEvent.SetUpdateInterval` with a millisecond
+ value to set the delay between updates. You may need to call
+ `wx.Window.UpdateWindowUI` at critical points, for example when
+ a dialog is about to be shown, in case the user sees a slight
+ delay before windows are updated.
+
+Note that although events are sent in idle time, defining a EVT_IDLE
+handler for a window does not affect this because the events are sent
+from an internal idle handler.
+
+wxWidgets tries to optimize update events on some platforms. On
+Windows and GTK+, events for menubar items are only sent when the menu
+is about to be shown, and not in idle time.
+", "");
+
class wxUpdateUIEvent : public wxCommandEvent
{
public:
- wxUpdateUIEvent(wxWindowID commandId = 0);
+ DocCtorStr(
+ wxUpdateUIEvent(wxWindowID commandId = 0),
+ "Constructor", "");
+
+ DocDeclStr(
+ bool , GetChecked() const,
+ "Returns ``True`` if the UI element should be checked.", "");
- bool GetChecked() const;
- bool GetEnabled() const;
- wxString GetText() const;
- bool GetSetText() const;
- bool GetSetChecked() const;
- bool GetSetEnabled() const;
+ DocDeclStr(
+ bool , GetEnabled() const,
+ "Returns ``True`` if the UI element should be enabled.", "");
+
+ DocDeclStr(
+ wxString , GetText() const,
+ "Returns the text that should be set for the UI element.", "");
+
+ DocDeclStr(
+ bool , GetSetText() const,
+ "Returns ``True`` if the application has called `SetText`. For
+wxWidgets internal use only.", "");
+
+ DocDeclStr(
+ bool , GetSetChecked() const,
+ "Returns ``True`` if the application has called `Check`. For wxWidgets
+internal use only.", "");
+
+ DocDeclStr(
+ bool , GetSetEnabled() const,
+ "Returns ``True`` if the application has called `Enable`. For wxWidgets
+internal use only.", "");
+
+
- void Check(bool check);
- void Enable(bool enable);
- void SetText(const wxString& text);
+ DocDeclStr(
+ void , Check(bool check),
+ "Check or uncheck the UI element.", "");
+
+ DocDeclStr(
+ void , Enable(bool enable),
+ "Enable or disable the UI element.", "");
+
+ DocDeclStr(
+ void , SetText(const wxString& text),
+ "Sets the text for this UI element.", "");
+
- // Sets the interval between updates in milliseconds.
- // Set to -1 to disable updates, or to 0 to update as frequently as possible.
- static void SetUpdateInterval(long updateInterval);
+
+ DocDeclStr(
+ static void , SetUpdateInterval(long updateInterval),
+ "Sets the interval between updates in milliseconds. Set to -1 to
+disable updates, or to 0 to update as frequently as possible. The
+default is 0.
+
+Use this to reduce the overhead of UI update events if your
+application has a lot of windows. If you set the value to -1 or
+greater than 0, you may also need to call `wx.Window.UpdateWindowUI`
+at appropriate points in your application, such as when a dialog is
+about to be shown.", "");
+
- // Returns the current interval between updates in milliseconds
- static long GetUpdateInterval();
+ DocDeclStr(
+ static long , GetUpdateInterval(),
+ "Returns the current interval between updates in milliseconds. -1
+disables updates, 0 updates as frequently as possible.", "");
+
- // Can we update this window?
- static bool CanUpdate(wxWindow *win);
+ DocDeclStr(
+ static bool , CanUpdate(wxWindow *win),
+ "Returns ``True`` if it is appropriate to update (send UI update events
+to) this window.
+
+This function looks at the mode used (see `wx.UpdateUIEvent.SetMode`),
+the wx.WS_EX_PROCESS_UPDATE_EVENTS flag in window, the time update
+events were last sent in idle time, and the update interval, to
+determine whether events should be sent to this window now. By default
+this will always return true because the update mode is initially
+wx.UPDATE_UI_PROCESS_ALL and the interval is set to 0; so update
+events will be sent as often as possible. You can reduce the frequency
+that events are sent by changing the mode and/or setting an update
+interval.
+", "");
+
- // Reset the update time to provide a delay until the next
- // time we should update
- static void ResetUpdateTime();
+ DocDeclStr(
+ static void , ResetUpdateTime(),
+ "Used internally to reset the last-updated time to the current time. It
+is assumed that update events are normally sent in idle time, so this
+is called at the end of idle processing.", "");
+
- // Specify how wxWindows will send update events: to
- // all windows, or only to those which specify that they
- // will process the events.
- static void SetMode(wxUpdateUIMode mode);
+ DocDeclStr(
+ static void , SetMode(wxUpdateUIMode mode),
+ "Specify how wxWidgets will send update events: to all windows, or only
+to those which specify that they will process the events.
+
+The mode may be one of the following values:
+
+ ============================= ==========================================
+ wxUPDATE_UI_PROCESS_ALL Send UI update events to all windows. This
+ is the default setting.
+ wxUPDATE_UI_PROCESS_SPECIFIED Send UI update events only to windows that
+ have the wx.WS_EX_PROCESS_UI_UPDATES extra
+ style set.
+ ============================= ==========================================
+", "");
+
- // Returns the UI update mode
- static wxUpdateUIMode GetMode();
+ DocDeclStr(
+ static wxUpdateUIMode , GetMode(),
+ "Returns a value specifying how wxWidgets will send update events: to
+all windows, or only to those which specify that they will process the
+events.", "");
+
};
-
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxSysColourChangedEvent,
+"This class is used for EVT_SYS_COLOUR_CHANGED, which are generated
+when the user changes the colour settings using the control
+panel. This is only applicable under Windows.
+
+The default event handler for this event propagates the event to child
+windows, since Windows only sends the events to top-level windows. If
+intercepting this event for a top-level window, remember to call
+`Skip` so the the base class handler will still be executed, or to
+pass the event on to the window's children explicitly.
+", "");
+
class wxSysColourChangedEvent: public wxEvent {
public:
- wxSysColourChangedEvent();
+ DocCtorStr(
+ wxSysColourChangedEvent(),
+ "Constructor", "");
};
//---------------------------------------------------------------------------
%newgroup;
-// wxEVT_MOUSE_CAPTURE_CHANGED
-// The window losing the capture receives this message
-// (even if it released the capture itself).
+DocStr(wxMouseCaptureChangedEvent,
+"An mouse capture changed event (EVT_MOUSE_CAPTURE_CHANGED) is sent to
+a window that loses its mouse capture. This is called even if
+`wx.Window.ReleaseMouse` was called by the application code. Handling
+this event allows an application to cater for unexpected capture
+releases which might otherwise confuse mouse handling code.
+
+This event is implemented under Windows only.", "");
+
class wxMouseCaptureChangedEvent : public wxEvent
{
public:
- wxMouseCaptureChangedEvent(wxWindowID winid = 0, wxWindow* gainedCapture = NULL);
-
- wxWindow* GetCapturedWindow() const;
+ DocCtorStr(
+ wxMouseCaptureChangedEvent(wxWindowID winid = 0, wxWindow* gainedCapture = NULL),
+ "Constructor", "");
+
+ DocDeclStr(
+ wxWindow* , GetCapturedWindow() const,
+ "Returns the window that gained the capture, or ``None`` if it was a
+non-wxWidgets window.", "");
+
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxDisplayChangedEvent,
+"An EVT_DISPLAY_CHANGED event is sent to all windows when the display
+resolution has changed.
+
+This event is implemented under Windows only.", "");
+
class wxDisplayChangedEvent : public wxEvent
{
public:
- wxDisplayChangedEvent();
+ DocCtorStr(
+ wxDisplayChangedEvent(),
+ "", "");
};
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxPaletteChangedEvent,
+"An EVT_PALETTE_CHANGED event is sent when the system palette has
+changed, thereby giving each window a chance to redo their own to
+match.
+
+This event is implemented under Windows only.", "");
+
class wxPaletteChangedEvent : public wxEvent
{
public:
//---------------------------------------------------------------------------
%newgroup;
+DocStr(wxQueryNewPaletteEvent,
+ "An EVT_QUERY_NEW_PALETE event indicates the window is getting keyboard
+focus and should re-do its palette.
+
+This event is implemented under Windows only.", "");
-// wxEVT_QUERY_NEW_PALETTE
-// Indicates the window is getting keyboard focus and should re-do its palette.
class wxQueryNewPaletteEvent : public wxEvent
{
public:
- wxQueryNewPaletteEvent(wxWindowID winid = 0);
+ DocCtorStr(
+ wxQueryNewPaletteEvent(wxWindowID winid = 0),
+ "Constructor.", "");
- // App sets this if it changes the palette.
- void SetPaletteRealized(bool realized);
+ DocDeclStr(
+ void , SetPaletteRealized(bool realized),
+ "App should set this if it changes the palette.", "");
+
bool GetPaletteRealized() const;
};
%newgroup;
-// Event generated by dialog navigation keys
-// wxEVT_NAVIGATION_KEY
+
+DocStr(wxNavigationKeyEvent,
+"EVT_NAVIGATION_KEY events are used to control moving the focus between
+widgets, otherwise known as tab-traversal. You woudl normally not
+catch navigation events in applications as there are already
+appropriate handlers in `wx.Dialog` and `wx.Panel`, but you may find
+it useful to send navigation events in certain situations to change
+the focus in certain ways, although it's probably easier to just call
+`wx.Window.Navigate`.", "");
class wxNavigationKeyEvent : public wxEvent
{
public:
- wxNavigationKeyEvent();
+ DocCtorStr(
+ wxNavigationKeyEvent(),
+ "", "");
+
+ DocDeclStr(
+ bool , GetDirection() const,
+ "Returns ``True`` if the direction is forward, ``False`` otherwise.", "");
+
+ DocDeclStr(
+ void , SetDirection(bool forward),
+ "Specify the direction that the navigation should take. Usually the
+difference between using Tab and Shift-Tab.", "");
- // direction: forward (True) or backward (False)
- bool GetDirection() const;
- void SetDirection(bool bForward);
- // it may be a window change event (MDI, notebook pages...) or a control
- // change event
- bool IsWindowChange() const;
- void SetWindowChange(bool bIs);
+ DocDeclStr(
+ bool , IsWindowChange() const,
+ "Returns ``True`` if window change is allowed.", "");
+
+ DocDeclStr(
+ void , SetWindowChange(bool ischange),
+ "Specify if the navigation should be able to change parent windows.
+For example, changing notebook pages, etc. This is usually implemented
+by using Control-Tab.", "");
+
- // the child which has the focus currently (may be NULL - use
- // wxWindow::FindFocus then)
- wxWindow* GetCurrentFocus() const;
- void SetCurrentFocus(wxWindow *win);
-};
+ DocDeclStr(
+ bool , IsFromTab() const,
+ "Returns ``True`` if the navigation event is originated from the Tab
+key.", "");
+
+ DocDeclStr(
+ void , SetFromTab(bool bIs),
+ "Set to true under MSW if the event was generated using the tab key.
+This is required for proper navogation over radio buttons.", "");
+
+
+ DocDeclStr(
+ void , SetFlags(long flags),
+ "Set the navigation flags to a combination of the following:
+
+ * wx.NavigationKeyEvent.IsBackward
+ * wx.NavigationKeyEvent.IsForward
+ * wx.NavigationKeyEvent.WinChange
+ * wx.NavigationKeyEvent.FromTab
+", "");
+
+
+ DocDeclStr(
+ wxWindow* , GetCurrentFocus() const,
+ "Returns the child window which currenty has the focus. May be
+``None``.", "");
+
+ DocDeclStr(
+ void , SetCurrentFocus(wxWindow *win),
+ "Set the window that has the focus.", "");
+
+ enum {
+ IsBackward,
+ IsForward,
+ WinChange,
+ FromTab
+ };
+};
//---------------------------------------------------------------------------
%newgroup;
-// Window creation/destruction events: the first is sent as soon as window is
-// created (i.e. the underlying GUI object exists), but when the C++ object is
-// fully initialized (so virtual functions may be called). The second,
-// wxEVT_DESTROY, is sent right before the window is destroyed - again, it's
-// still safe to call virtual functions at this moment
+
+DocStr(wxWindowCreateEvent,
+ "The EVT_WINDOW_CREATE event is sent as soon as the window object (the
+underlying GUI object) exists.", "");
class wxWindowCreateEvent : public wxCommandEvent
{
public:
wxWindowCreateEvent(wxWindow *win = NULL);
- wxWindow *GetWindow() const;
+
+ DocDeclStr(
+ wxWindow *, GetWindow() const,
+ "Returns the window that this event refers to.", "");
+
};
+
+DocStr(wxWindowDestroyEvent,
+ "The EVT_WINDOW_DESTROY event is sent right before the window is
+destroyed.", "");
class wxWindowDestroyEvent : public wxCommandEvent
{
public:
wxWindowDestroyEvent(wxWindow *win = NULL);
- wxWindow *GetWindow() const;
+
+ DocDeclStr(
+ wxWindow *, GetWindow() const,
+ "Returns the window that this event refers to.", "");
};
//---------------------------------------------------------------------------
%newgroup;
-// A Context event is sent when the user right clicks on a window or
-// presses Shift-F10
-// NOTE : Under windows this is a repackaged WM_CONTETXMENU message
-// Under other systems it may have to be generated from a right click event
-/*
- wxEVT_CONTEXT_MENU
-*/
+
+DocStr(wxContextMenuEvent,
+"This class is used for context menu events (EVT_CONTECT_MENU,) sent to
+give the application a chance to show a context (popup) menu.", "");
class wxContextMenuEvent : public wxCommandEvent
{
public:
- wxContextMenuEvent(wxEventType type = wxEVT_NULL,
- wxWindowID winid = 0,
- const wxPoint& pt = wxDefaultPosition);
+ DocCtorStr(
+ wxContextMenuEvent(wxEventType type = wxEVT_NULL,
+ wxWindowID winid = 0,
+ const wxPoint& pt = wxDefaultPosition),
+ "Constructor.", "");
// Position of event (in screen coordinates)
- const wxPoint& GetPosition() const;
- void SetPosition(const wxPoint& pos);
+ DocDeclStr(
+ const wxPoint& , GetPosition() const,
+ "Returns the position (in screen coordinants) at which the menu should
+be shown.", "");
+
+
+ DocDeclStr(
+ void , SetPosition(const wxPoint& pos),
+ "Sets the position at which the menu should be shown.", "");
+
};
//---------------------------------------------------------------------------
%newgroup;
-// Whether to always send idle events to windows, or
-// to only send update events to those with the
-// wxWS_EX_PROCESS_IDLE style.
-
enum wxIdleMode
{
- // Send idle events to all windows
wxIDLE_PROCESS_ALL,
-
- // Send idle events to windows that have
- // the wxWS_EX_PROCESS_IDLE flag specified
wxIDLE_PROCESS_SPECIFIED
};
+
+DocStr(wxIdleEvent,
+"This class is used for EVT_IDLE events, which are generated and sent
+when the application *becomes* idle. In other words, the when the
+event queue becomes empty then idle events are sent to all windows (by
+default) and as long as none of them call `RequestMore` then there are
+no more idle events until after the system event queue has some normal
+events and then becomes empty again.
+
+By default, idle events are sent to all windows. If this is causing a
+significant overhead in your application, you can call
+`wx.IdleEvent.SetMode` with the value wx.IDLE_PROCESS_SPECIFIED, and
+set the wx.WS_EX_PROCESS_IDLE extra window style for every window
+which should receive idle events. Then idle events will only be sent
+to those windows and not to any others.", "");
+
class wxIdleEvent : public wxEvent
{
public:
- wxIdleEvent();
+ DocCtorStr(
+ wxIdleEvent(),
+ "Constructor", "");
+
+
+ DocDeclStr(
+ void , RequestMore(bool needMore = true),
+ "Tells wxWidgets that more processing is required. This function can be
+called by an EVT_IDLE handler for a window to indicate that the
+application should forward the EVT_IDLE event once more to the
+application windows. If no window calls this function during its
+EVT_IDLE handler, then the application will remain in a passive event
+loop until a new event is posted to the application by the windowing
+system.", "");
+
+ DocDeclStr(
+ bool , MoreRequested() const,
+ "Returns ``True`` if the OnIdle function processing this event
+requested more processing time.", "");
- void RequestMore(bool needMore = True);
- bool MoreRequested() const;
- // Specify how wxWindows will send idle events: to
- // all windows, or only to those which specify that they
- // will process the events.
- static void SetMode(wxIdleMode mode);
+ DocDeclStr(
+ static void , SetMode(wxIdleMode mode),
+ "Static method for specifying how wxWidgets will send idle events: to
+all windows, or only to those which specify that they will process the
+events.
+
+The mode can be one of the following values:
+
+ ========================= ========================================
+ wx.IDLE_PROCESS_ALL Send idle events to all windows
+ wx.IDLE_PROCESS_SPECIFIED Send idle events only to windows that have
+ the wx.WS_EX_PROCESS_IDLE extra style
+ flag set.
+ ========================= ========================================
+", "");
+
- // Returns the idle event mode
- static wxIdleMode GetMode();
+ DocDeclStr(
+ static wxIdleMode , GetMode(),
+ "Static method returning a value specifying how wxWidgets will send
+idle events: to all windows, or only to those which specify that they
+will process the events.", "");
+
- // Can we send an idle event?
- static bool CanSend(wxWindow* win);
+ DocDeclStr(
+ static bool , CanSend(wxWindow* win),
+ "Returns ``True`` if it is appropriate to send idle events to this
+window.
+
+This function looks at the mode used (see `wx.IdleEvent.SetMode`), and
+the wx.WS_EX_PROCESS_IDLE style in window to determine whether idle
+events should be sent to this window now. By default this will always
+return ``True`` because the update mode is initially
+wx.IDLE_PROCESS_ALL. You can change the mode to only send idle events
+to windows with the wx.WS_EX_PROCESS_IDLE extra window style set.", "");
+
};
//---------------------------------------------------------------------------
// system without loosing anything. They do this by keeping a reference to
// themselves and some special case handling in wxPyCallback::EventThunker.
+DocStr(wxPyEvent,
+"wx.PyEvent can be used as a base class for implementing custom event
+types in Python. You should derived from this class instead of
+`wx.Event` because this class is Python-aware and is able to transport
+its Python bits safely through the wxWidgets event system and have
+them still be there when the event handler is invoked.
+
+:see: `wx.PyCommandEvent`
+", "");
+
class wxPyEvent : public wxEvent {
public:
- %addtofunc wxPyEvent "self.SetSelf(self)"
- wxPyEvent(int winid=0, wxEventType commandType = wxEVT_NULL );
+ %pythonAppend wxPyEvent "self._SetSelf(self)"
+ DocCtorStr(
+ wxPyEvent(int winid=0, wxEventType eventType = wxEVT_NULL ),
+ "", "");
+
~wxPyEvent();
- void SetSelf(PyObject* self);
- PyObject* GetSelf();
+ %Rename(_SetSelf, void , SetSelf(PyObject* self));
+ %Rename(_GetSelf, PyObject* , GetSelf());
};
+
+DocStr(wxPyCommandEvent,
+"wx.PyCommandEvent can be used as a base class for implementing custom
+event types in Python, where the event shoudl travel up to parent
+windows looking for a handler. You should derived from this class
+instead of `wx.CommandEvent` because this class is Python-aware and is
+able to transport its Python bits safely through the wxWidgets event
+system and have them still be there when the event handler is invoked.
+
+:see: `wx.PyEvent`
+", "");
+
class wxPyCommandEvent : public wxCommandEvent {
public:
- %addtofunc wxPyCommandEvent "self.SetSelf(self)"
- wxPyCommandEvent(wxEventType commandType = wxEVT_NULL, int id=0);
+ %pythonAppend wxPyCommandEvent "self._SetSelf(self)"
+
+ DocCtorStr(
+ wxPyCommandEvent(wxEventType eventType = wxEVT_NULL, int id=0),
+ "", "");
+
~wxPyCommandEvent();
- void SetSelf(PyObject* self);
- PyObject* GetSelf();
+ %Rename(_SetSelf, void , SetSelf(PyObject* self));
+ %Rename(_GetSelf, PyObject* , GetSelf());
};
//---------------------------------------------------------------------------
+DocStr(wxDateEvent,
+"This event class holds information about a date change event and is
+used together with `wx.DatePickerCtrl`. It also serves as a base class
+for `wx.calendar.CalendarEvent`. Bind these event types with
+EVT_DATE_CHANGED.", "");
+
+class wxDateEvent : public wxCommandEvent
+{
+public:
+ DocCtorStr(
+ wxDateEvent(wxWindow *win, const wxDateTime& dt, wxEventType type),
+ "", "");
+
+ DocDeclStr(
+ const wxDateTime& , GetDate() const,
+ "Returns the date.", "");
+
+ DocDeclStr(
+ void , SetDate(const wxDateTime &date),
+ "Sets the date carried by the event, normally only used by the library
+internally.", "");
+
+
+};
+
+
+%constant wxEventType wxEVT_DATE_CHANGED;
+
+%pythoncode {
+ EVT_DATE_CHANGED = wx.PyEventBinder( wxEVT_DATE_CHANGED, 1 )
+}
+
+//---------------------------------------------------------------------------
projects / wxWidgets.git / blobdiff