/////////////////////////////////////////////////////////////////////////////
-// Name: setup.h
+// Name: wx/msw/setup.h
// Purpose: Configuration for the library
// Author: Julian Smart
// Modified by:
#ifndef _WX_SETUP_H_
#define _WX_SETUP_H_
-/*
- * General features
- *
- */
+// ----------------------------------------------------------------------------
+// global settings
+// ----------------------------------------------------------------------------
+
+// define this to 0 when building wxBase library
+#define wxUSE_GUI 1
+
+// ----------------------------------------------------------------------------
+// compatibility settings
+// ----------------------------------------------------------------------------
+
+// This setting determines the compatibility with 1.68 API:
+// Level 0: no backward compatibility, all new features
+// Level 1: some extra methods are defined for compatibility.
+//
+// Default is 0.
+//
+// Recommended setting: 0 (in fact the compatibility code is now very minimal
+// so there is little advantage to setting it to 1.
+#define WXWIN_COMPATIBILITY 0
+// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap,
+// but this is very dangerous because you can mistakenly pass an icon instead
+// of a bitmap to a function taking "const wxBitmap&" - which will *not* work
+// because an icon is not a valid bitmap
+//
+// Starting from 2.1.12, you have the choice under this backwards compatible
+// behaviour (your code will still compile, but probably won't behave as
+// expected!) and not deriving wxIcon class from wxBitmap, but providing a
+// conversion ctor wxBitmap(const wxIcon&) instead.
+//
+// Recommended setting: 0
+#define wxICON_IS_BITMAP 0
+
+// ----------------------------------------------------------------------------
+// non GUI features selection
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
+// integer which is implemented in terms of native 64 bit integers if any or
+// uses emulation otherwise.
+//
+// This class is required by wxDateTime and so you should enable it if you want
+// to use wxDateTime. For most modern platforms, it will use the native 64 bit
+// integers in which case (almost) all of its functions are inline and it
+// almost does not take any space, so there should be no reason to switch it
+// off.
+//
+// Recommended setting: 1
+#define wxUSE_LONGLONG 1
+
+// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which
+// allow to manipulate dates, times and time intervals. wxDateTime replaces the
+// old wxTime and wxDate classes which are still provided for backwards
+// compatibility (and implemented in terms of wxDateTime).
+//
+// Note that this class is relatively new and is still officially in alpha
+// stage because some features are not yet (fully) implemented. It is already
+// quite useful though and should only be disabled if you are aiming at
+// absolutely minimal version of the library.
+//
+// Requires: wxUSE_LONGLONG
+//
+// Recommended setting: 1
+#define wxUSE_TIMEDATE 1
+
+// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
+// which allow the application to store its settings in the persistent
+// storage. Setting this to 1 will also enable on-demand creation of the
+// global config object in wxApp.
+//
+// See also wxUSE_CONFIG_NATIVE below.
+//
+// Recommended setting: 1
#define wxUSE_CONFIG 1
- // Use wxConfig, with CreateConfig in wxApp
-#define WXWIN_COMPATIBILITY 0
- // Compatibility with 1.68 API.
- // Level 0: no backward compatibility, all new features
- // Level 1: Some compatibility. In fact
- // the compatibility code is now very minimal so there
- // is little advantage to setting it to 1.
+// If wxUSE_CONFIG is 1, you may choose to use either the native config
+// classes under Windows (using .INI files under Win16 and the registry under
+// Win32) or the portable text file format used by the config classes under
+// Unix.
+//
+// Default is 1 to use native classes. Note that you may still use
+// wxFileConfig even if you set this to 1 - just the config object created by
+// default for the applications needs will be a wxRegConfig or wxIniConfig and
+// not wxFileConfig.
+//
+// Recommended setting: 1
+#define wxUSE_CONFIG_NATIVE 1
+
+// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
+// to connect/disconnect from the network and be notified whenever the dial-up
+// network connection is established/terminated.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DIALUP_MANAGER 1
+
+// ----------------------------------------------------------------------------
+// Optional controls
+// ----------------------------------------------------------------------------
+
+// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
+// classes at all. Otherwise, use the native toolbar class unless
+// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
+// supports some features which might not be supported by the native wxToolBar
+// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
+//
+// Default is 1 for all settings.
+//
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
+// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
+#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
+#define wxUSE_TOOLBAR_SIMPLE 1
+
+// wxNotebook is a control with several "tabs" located on one of its sides. It
+// may be used ot logically organise the data presented to the user instead of
+// putting everything in one huge dialog. It replaces wxTabControl and related
+// classes of wxWin 1.6x.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTEBOOK 1
+
+// The corresponding controls will be compiled in if wxUSE_<CONTROL> is set to
+// 1 and not compiled into the library otherwise.
+//
+// Default is 1 for everything.
+//
+// Recommended setting: 1 (library might fail to compile for some combinations
+// of disabled controls)
+#define wxUSE_CARET 1
+#define wxUSE_CHECKBOX 1
+#define wxUSE_CHECKLISTBOX 1
+#define wxUSE_CHOICE 1
+#define wxUSE_COMBOBOX 1
+#define wxUSE_GAUGE 1
+#define wxUSE_LISTBOX 1
+#define wxUSE_RADIOBOX 1
+#define wxUSE_RADIOBTN 1
+#define wxUSE_SCROLLBAR 1
+#define wxUSE_SLIDER 1
+#define wxUSE_SPINBTN 1
+#define wxUSE_SPINCTRL 1
+#define wxUSE_STATLINE 1
+
+// this setting is obsolete, value is ignored
+#define wxUSE_BUTTONBAR 1
+
+// wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and
+// the new, much imporved and enhanced version. The new version is backwards
+// compatible with the old one and should be used whenever possible, i.e. if
+// you set wxUSE_GRID to 1, set wxUSE_NEW_GRID to 1 too.
+//
+// Default is 1 for both options.
+//
+// Recommended setting: 1 for wxUSE_NEW_GRID, 0 if you have an old code using
+// wxGrid and 100% backwards compatible (with all old wxGrid quirks) is
+// essential.
+#define wxUSE_GRID 1
+#define wxUSE_NEW_GRID 1
+
+// ----------------------------------------------------------------------------
+// Metafiles support
+// ----------------------------------------------------------------------------
+
+// Windows supports the graphics format known as metafile which is, though not
+// portable, is widely used under Windows and so is supported by wxWin (under
+// Windows only, of course). Win16 (Win3.1) used the so-called "Window
+// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
+// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
+// default, WMFs will be used under Win16 and EMFs under Win32. This may be
+// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
+// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
+// in any metafile related classes at all.
+//
+// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
+//
+// Recommended setting: default or 0 for everything for portable programs.
+#define wxUSE_METAFILE 1
+#define wxUSE_ENH_METAFILE 1
+#define wxUSE_WIN_METAFILES_ALWAYS 0
+
+// ----------------------------------------------------------------------------
+// Big GUI components
+// ----------------------------------------------------------------------------
+
+// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
+// much more.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
+// smaller library.
+#define wxUSE_HTML 1
+
+// wxPlot is a class to display functions plots in wxWindow.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_PLOT 1
+
+// ----------------------------------------------------------------------------
+// Postscript support settings
+// ----------------------------------------------------------------------------
#define wxUSE_POSTSCRIPT 0
- // 0 for no PostScript device context
+ // 0 for no PostScript device context
#define wxUSE_AFM_FOR_POSTSCRIPT 0
// 1 to use font metric files in GetTextExtent
-#define wxUSE_METAFILE 1
- // 0 for no Metafile and metafile device context
#define wxUSE_IPC 1
// 0 for no interprocess comms
// Note: wxHELP uses IPC under X so these are interdependent!
#define wxUSE_CONSTRAINTS 1
// 0 for no window layout constraint system
-#define wxUSE_TIMEDATE 1
- // 0 for no wxTime/wxDate classes
-
#define wxUSE_CLIPBOARD 1
// 0 for no clipboard functions
#define wxUSE_SPLINES 1
- // 0 for no splines
+ // 0 for no splines
#define wxUSE_DRAG_AND_DROP 1
// 0 for no drag and drop
-#define wxUSE_TOOLBAR 1
- // Define 1 to use toolbar classes
-#define wxUSE_BUTTONBAR 1
- // Define 1 to use buttonbar classes (enhanced toolbar
- // for MS Windows)
-#define wxUSE_GAUGE 1
- // Define 1 to use Microsoft's gauge (Windows)
- // or Bull's gauge (Motif) library (both in contrib).
-#define wxUSE_COMBOBOX 1
- // Define 1 to use COMBOXBOX control (Windows)
- // or FWW's ComboBox widget (Motif).
-#define wxUSE_CHOICE 1
- // Define 1 to use CHOICE
-
-#define wxUSE_RADIOBUTTON 1
- // Define 1 to use radio button control
-#define wxUSE_RADIOBTN 1
- // Unfortunately someone introduced this one, too
-
-#define wxUSE_SCROLLBAR 1
- // Define 1 to compile contributed wxScrollBar class
-
-#define wxUSE_CHECKBOX 1
- // Define 1 to compile checkbox
-
-#define wxUSE_LISTBOX 1
- // Define 1 to compile listbox
-
-#define wxUSE_SPINBTN 1
- // Define 1 to compile spin button
-
-// use wxStaticLine class (separator line in the dialog)?
-#define wxUSE_STATLINE 1
-
-#define wxUSE_CHECKLISTBOX 1
- // Define 1 to compile check listbox
-
-#define wxUSE_CHOICE 1
- // Define 1 to compile choice
-
-#define wxUSE_CARET 1
- // Define 1 to use wxCaret class
-#define wxUSE_XPM_IN_MSW 1
- // Define 1 to support the XPM package in wxBitmap.
+#define wxUSE_XPM_IN_MSW 1
+ // Define 1 to support the XPM package in wxBitmap.
#define wxUSE_IMAGE_LOADING_IN_MSW 1
- // Use dynamic DIB loading/saving code in utils/dib under MSW.
+ // Use dynamic DIB loading/saving code in utils/dib under MSW.
#define wxUSE_RESOURCE_LOADING_IN_MSW 1
- // Use dynamic icon/cursor loading/saving code
- // under MSW.
+ // Use dynamic icon/cursor loading/saving code
+ // under MSW.
#define wxUSE_WX_RESOURCES 1
- // Use .wxr resource mechanism (requires PrologIO library)
+ // Use .wxr resource mechanism (requires PrologIO library)
-// support for startup tips (wxShowTip &c)
-#define wxUSE_STARTUP_TIPS 1
-
-// BC++/Win16 can't cope with the amount of data in resource.cpp
-#if defined(__WIN16__) && defined(__BORLANDC__)
-#undef wxUSE_WX_RESOURCES
-#define wxUSE_WX_RESOURCES 0
-#endif
+#define wxUSE_STARTUP_TIPS 1
+ // support for startup tips (wxShowTip &c)
#define wxUSE_DOC_VIEW_ARCHITECTURE 1
- // Set to 0 to disable document/view architecture
+ // Set to 0 to disable document/view architecture
+#define wxUSE_MDI_ARCHITECTURE 1
+ // Set to 0 to disable MDI document/view architecture
#define wxUSE_PRINTING_ARCHITECTURE 1
- // Set to 0 to disable print/preview architecture code
+ // Set to 0 to disable print/preview architecture code
#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
- // Set to 0 to disable PostScript print/preview architecture code
- // under Windows (just use Windows printing).
+ // Set to 0 to disable PostScript print/preview architecture code
+ // under Windows (just use Windows printing).
#define wxUSE_DYNAMIC_CLASSES 1
- // If 1, enables provision of run-time type information.
- // NOW MANDATORY: don't change.
+ // If 1, enables provision of run-time type information.
+ // NOW MANDATORY: don't change.
#define wxUSE_MEMORY_TRACING 1
- // If 1, enables debugging versions of wxObject::new and
- // wxObject::delete *IF* __WXDEBUG__ is also defined.
- // WARNING: this code may not work with all architectures, especially
- // if alignment is an issue.
+ // If 1, enables debugging versions of wxObject::new and
+ // wxObject::delete *IF* __WXDEBUG__ is also defined.
+ // WARNING: this code may not work with all architectures, especially
+ // if alignment is an issue.
#define wxUSE_DEBUG_CONTEXT 1
- // If 1, enables wxDebugContext, for
- // writing error messages to file, etc.
- // If __WXDEBUG__ is not defined, will still use
- // normal memory operators.
- // It's recommended to set this to 1,
- // since you may well need to output
- // an error log in a production
- // version (or non-debugging beta)
+ // If 1, enables wxDebugContext, for
+ // writing error messages to file, etc.
+ // If __WXDEBUG__ is not defined, will still use
+ // normal memory operators.
+ // It's recommended to set this to 1,
+ // since you may well need to output
+ // an error log in a production
+ // version (or non-debugging beta)
#define wxUSE_GLOBAL_MEMORY_OPERATORS 1
- // In debug mode, cause new and delete to be redefined globally.
- // If this causes problems (e.g. link errors), set this to 0.
+ // In debug mode, cause new and delete to be redefined globally.
+ // If this causes problems (e.g. link errors), set this to 0.
#define wxUSE_DEBUG_NEW_ALWAYS 1
- // In debug mode, causes new to be defined to
- // be WXDEBUG_NEW (see object.h).
- // If this causes problems (e.g. link errors), set this to 0.
- // You may need to set this to 0 if using templates (at least
- // for VC++).
-
-#define REMOVE_UNUSED_ARG 1
- // Set this to 0 if your compiler can't cope
- // with omission of prototype parameters.
-
-#define wxUSE_ODBC 1
- // Define 1 to use ODBC classes
+ // In debug mode, causes new to be defined to
+ // be WXDEBUG_NEW (see object.h).
+ // If this causes problems (e.g. link errors), set this to 0.
+ // You may need to set this to 0 if using templates (at least
+ // for VC++).
+
+#define REMOVE_UNUSED_ARG 1
+ // Set this to 0 if your compiler can't cope
+ // with omission of prototype parameters.
+
+#define wxUSE_ODBC 0
+ // Define 1 to use ODBC classes
+
+#define wxODBC_FWD_ONLY_CURSORS 1
+ // For backward compatibility reasons, this parameter now only
+ // controls the default scrolling method used by cursors. This
+ // default behavior can be overriden by setting the second param
+ // of wxDB::GetDbConnection() to indicate whether the connection
+ // (and any wxTable()s that use the connection) should support
+ // forward only scrolling of cursors, or both forward and backward
+ // Support for backward scrolling cursors is dependent on the
+ // data source as well as the ODBC driver being used.
#ifndef __MWERKS__
#define wxUSE_IOSTREAMH 1
#else
#define wxUSE_IOSTREAMH 1
#endif
- // VC++ 4.2 and above allows <iostream> and <iostream.h>
- // but you can't mix them. Set to 1 for <iostream.h>,
- // 0 for <iostream>
+ // VC++ 4.2 and above allows <iostream> and <iostream.h>
+ // but you can't mix them. Set to 1 for <iostream.h>,
+ // 0 for <iostream>
#define wxUSE_STREAMS 1
- // If enabled (1), compiles wxWindows streams classes
+ // If enabled (1), compiles wxWindows streams classes
-#define wxUSE_STD_IOSTREAM 1
- // Use standard C++ streams if 1. If 0, use wxWin
- // streams implementation.
+#define wxUSE_STD_IOSTREAM 0
+ // Use standard C++ streams if 1. If 0, use wxWin
+ // streams implementation.
#define wxUSE_WXCONFIG 1
- // if enabled, compiles built-in OS independent wxConfig
- // class and it's file (any platform) and registry (Win)
- // based implementations
+ // if enabled, compiles built-in OS independent wxConfig
+ // class and it's file (any platform) and registry (Win)
+ // based implementations
#define wxUSE_THREADS 1
- // support for multithreaded applications: if
- // 1, compile in thread classes (thread.h)
- // and make the library thread safe
+ // support for multithreaded applications: if
+ // 1, compile in thread classes (thread.h)
+ // and make the library thread safe
#define wxUSE_ZLIB 1
- // Use zlib for compression in streams and PNG code
+ // Use zlib for compression in streams and PNG code
#define wxUSE_LIBPNG 1
- // Use PNG bitmap code
-#define wxUSE_LIBJPEG 0
- // Use JPEG bitmap code
+ // Use PNG bitmap/image code
+#define wxUSE_LIBJPEG 1
+ // Use JPEG bitmap/image code
+#define wxUSE_LIBTIFF 0
+ // Use TIFF bitmap/image code
+#define wxUSE_GIF 1
+ // Use GIF bitmap/image code
+#define wxUSE_PNM 1
+ // Use PNM bitmap/image code
+#define wxUSE_PCX 1
+ // Use PCX bitmap/image code
#define wxUSE_SERIAL 0
- // Use serialization (requires utils/serialize)
-#define wxUSE_DYNLIB_CLASS 0
- // Compile in wxLibrary class for run-time
- // DLL loading and function calling
+ // Use serialization (requires utils/serialize)
+#define wxUSE_DYNLIB_CLASS 1
+ // Compile in wxLibrary class for run-time
+ // DLL loading and function calling
#define wxUSE_TOOLTIPS 1
- // Define to use wxToolTip class and
- // wxWindow::SetToolTip() method
-#define wxUSE_SOCKETS 0
- // Set to 1 to use socket classes
-#define wxUSE_HTML 0
- // Set to 1 to use wxHTML sub-library
+ // Define to use wxToolTip class and
+ // wxWindow::SetToolTip() method
+#define wxUSE_SOCKETS 1
+ // Set to 1 to use socket classes
+#define wxUSE_FS_ZIP 1
+#define wxUSE_FS_INET 1 // Set to 1 to enable virtual file systems
+
+#define wxUSE_BUSYINFO 1
+ // wxBusyInfo displays window with message
+ // when app is busy. Works in same way as
+ // wxBusyCursor
+#define wxUSE_ZIPSTREAM 1
+ // input stream for reading from zip archives
/*
* Finer detail
#define wxUSE_INTL 1
// wxLogXXX functions - highly recommended
-#define wxUSE_LOG 1
+#define wxUSE_LOG 1
// wxValidator class
#define wxUSE_VALIDATORS 1
// text entry dialog and wxGetTextFromUser function
#define wxUSE_TEXTDLG 1
-// wxToolBar class
-#define wxUSE_TOOLBAR 1
-
// wxStatusBar class
#define wxUSE_STATUSBAR 1
#define wxUSE_CTL3D 0
#else
#define wxUSE_CTL3D 1
- // Define 1 to use Microsoft CTL3D library.
- // See note above about using FAFA and CTL3D.
+ // Define 1 to use Microsoft CTL3D library.
+ // See note above about using FAFA and CTL3D.
+#endif
+
+// can we use RICHEDIT control?
+#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__)
+#define wxUSE_RICHEDIT 1
+#else
+#define wxUSE_RICHEDIT 0
#endif
#define wxUSE_COMMON_DIALOGS 1
- // On rare occasions (e.g. using DJGPP) may want
- // to omit common dialogs
- // (e.g. file selector, printer dialog).
- // Switching this off also switches off
- // the printing architecture and interactive
- // wxPrinterDC.
+ // On rare occasions (e.g. using DJGPP) may want
+ // to omit common dialogs
+ // (e.g. file selector, printer dialog).
+ // Switching this off also switches off
+ // the printing architecture and interactive
+ // wxPrinterDC.
#define wxUSE_ITSY_BITSY 1
- // Define 1 to use Microsoft's ItsyBitsy
- // small title bar library, for wxMiniFrame
+ // Define 1 to use Microsoft's ItsyBitsy
+ // small title bar library, for wxMiniFrame
#define wxUSE_BITMAP_MESSAGE 1
- // Define 1 to use bitmap messages.
+ // Define 1 to use bitmap messages.
#define wxUSE_PORTABLE_FONTS_IN_MSW 0
- // Define 1 to use new portable font scheme in Windows
- // (used by default under X)
+ // Define 1 to use new portable font scheme in Windows
+ // (used by default under X)
#define wxFONT_SIZE_COMPATIBILITY 0
- // Define 1 for font size to be backward compatible
- // to 1.63 and earlier. 1.64 and later define point
- // sizes to be compatible with Windows.
+ // Define 1 for font size to be backward compatible
+ // to 1.63 and earlier. 1.64 and later define point
+ // sizes to be compatible with Windows.
#define wxUSE_GENERIC_DIALOGS_IN_MSW 1
- // Define 1 to use generic dialogs in Windows, even though
- // they duplicate native common dialog (e.g. wxColourDialog)
+ // Define 1 to use generic dialogs in Windows, even though
+ // they duplicate native common dialog (e.g. wxColourDialog)
#define wxUSE_PENWINDOWS 0
- // Set to 1 to use PenWindows
+ // Set to 1 to use PenWindows
#define wxUSE_OWNER_DRAWN 1
- // Owner-drawn menus and listboxes
+ // Owner-drawn menus and listboxes
#define wxUSE_NATIVE_STATUSBAR 1
- // Set to 0 to use cross-platform wxStatusBar
-#define wxUSE_DBWIN32 1
- // Use Andrew Tucker's OutputDebugString implementation
- // (required on Win95 only). See utils.cpp.
+ // Set to 0 to use cross-platform wxStatusBar
/*
* Any platform
*/
#define wxUSE_TYPEDEFS 0
- // Use typedefs not classes for wxPoint
- // and others, to reduce overhead and avoid
- // MS C7 memory bug. Bounds checker
- // complains about deallocating
- // arrays of wxPoints if wxPoint is a class.
+ // Use typedefs not classes for wxPoint
+ // and others, to reduce overhead and avoid
+ // MS C7 memory bug. Bounds checker
+ // complains about deallocating
+ // arrays of wxPoints if wxPoint is a class.
+
+#if defined(__MINGW32__) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
+#ifndef wxUSE_NORLANDER_HEADERS
+# define wxUSE_NORLANDER_HEADERS 1
+#endif
+#endif
-#if (!defined(WIN32) && !defined(__WIN32__)) || defined(__GNUWIN32__)
+#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !defined(wxUSE_NORLANDER_HEADERS))
// Can't use OLE drag and drop in Windows 3.1 because we don't know how
// to implement UUIDs
// GnuWin32 doesn't have appropriate headers for e.g. IUnknown.
#undef wxUSE_THREADS
#define wxUSE_THREADS 0
-#undef wxUSE_DBWIN32
-#define wxUSE_DBWIN32 0
-
#undef wxUSE_OWNER_DRAWN
#define wxUSE_OWNER_DRAWN 0
#endif
#undef wxUSE_THREADS
#define wxUSE_THREADS 0
-#undef wxUSE_DBWIN32
-#define wxUSE_DBWIN32 0
-
#undef wxUSE_ODBC
#define wxUSE_ODBC 0
#endif
-#if defined(__WXMSW__) && defined(__BORLANDC__)
+// BC++/Win16 can't cope with the amount of data in resource.cpp
+#if defined(__WIN16__) && defined(__BORLANDC__)
+#undef wxUSE_WX_RESOURCES
+#define wxUSE_WX_RESOURCES 0
+
#undef wxUSE_ODBC
-#define wxUSE_ODBC 0
+#define wxUSE_ODBC 0
+#endif
+
+#if defined(__WXMSW__) && defined(__WATCOMC__)
+#undef wxUSE_LIBJPEG
+#define wxUSE_LIBJPEG 0
#endif
#if defined(__WXMSW__) && !defined(__WIN32__)
+#undef wxUSE_SOCKETS
+#define wxUSE_SOCKETS 0
+
#undef wxUSE_THREADS
#define wxUSE_THREADS 0
#undef wxUSE_TOOLTIPS
#define wxUSE_TOOLTIPS 0
+#undef wxUSE_SPINCTRL
+#define wxUSE_SPINCTRL 0
+
+#undef wxUSE_SPINBTN
+#define wxUSE_SPINBTN 0
+
+#undef wxUSE_LIBPNG
+#define wxUSE_LIBPNG 0
+
+#undef wxUSE_LIBJPEG
+#define wxUSE_LIBJPEG 0
+
+#undef wxUSE_GIF
+#define wxUSE_GIF 0
+
+#undef wxUSE_PNM
+#define wxUSE_PNM 0
+
+#undef wxUSE_PCX
+#define wxUSE_PCX 0
+
#endif
#endif
projects / wxWidgets.git / blobdiff