\setheader{{\it CHAPTER \thechapter}}{}{}{}{}{{\it CHAPTER \thechapter}}%
\setfooter{\thepage}{}{}{}{}{\thepage}
-The functions and macros defined in wxWindows are described here: you can
+The functions and macros defined in wxWidgets are described here: you can
either look up a function using the alphabetical listing of them or find it in
the corresponding topic.
-\section{Alphabetical functions and macros list}
+\section{Alphabetical functions and macros list}\label{functionsalphabetically}
\helpref{CLASSINFO}{classinfo}\\
\helpref{copystring}{copystring}\\
\helpref{IMPLEMENT\_CLASS}{implementclass}\\
\helpref{IMPLEMENT\_DYNAMIC\_CLASS2}{implementdynamicclass2}\\
\helpref{IMPLEMENT\_DYNAMIC\_CLASS}{implementdynamicclass}\\
+\helpref{wxCONCAT}{wxconcat}\\
\helpref{WXDEBUG\_NEW}{debugnew}\\
\helpref{WXTRACELEVEL}{tracelevel}\\
\helpref{WXTRACE}{trace}\\
\helpref{wxBITMAP}{wxbitmapmacro}\\
\helpref{wxBeginBusyCursor}{wxbeginbusycursor}\\
\helpref{wxBell}{wxbell}\\
+\helpref{wxCHANGE\_UMASK}{wxchangeumask}\\
\helpref{wxCHECK}{wxcheck}\\
\helpref{wxCHECK2\_MSG}{wxcheck2msg}\\
\helpref{wxCHECK2}{wxcheck2}\\
\helpref{wxCHECK\_MSG}{wxcheckmsg}\\
\helpref{wxCHECK\_RET}{wxcheckret}\\
\helpref{wxCHECK\_VERSION}{wxcheckversion}\\
+\helpref{wxCHECK\_VERSION\_FULL}{wxcheckversionfull}\\
\helpref{wxCHECK\_W32API\_VERSION}{wxcheckw32apiversion}\\
\helpref{wxClientDisplayRect}{wxclientdisplayrect}\\
\helpref{wxClipboardOpen}{functionwxclipboardopen}\\
\helpref{wxGetCwd}{wxgetcwd}\\
\helpref{wxGetDiskSpace}{wxgetdiskspace}\\
\helpref{wxGetDisplayName}{wxgetdisplayname}\\
+\helpref{wxGetDisplaySize}{wxdisplaysize}\\
+\helpref{wxGetDisplaySizeMM}{wxdisplaysizemm}\\
\helpref{wxGetElapsedTime}{wxgetelapsedtime}\\
\helpref{wxGetEmailAddress}{wxgetemailaddress}\\
\helpref{wxGetEnv}{wxgetenv}\\
\helpref{wxGetFullHostName}{wxgetfullhostname}\\
\helpref{wxGetHomeDir}{wxgethomedir}\\
\helpref{wxGetHostName}{wxgethostname}\\
+\helpref{wxGetKeyState}{wxgetkeystate}\\
\helpref{wxGetLocalTimeMillis}{wxgetlocaltimemillis}\\
\helpref{wxGetLocalTime}{wxgetlocaltime}\\
\helpref{wxGetMousePosition}{wxgetmouseposition}\\
\helpref{wxMakeMetafilePlaceable}{wxmakemetafileplaceable}\\
\helpref{wxMatchWild}{wxmatchwild}\\
\helpref{wxMessageBox}{wxmessagebox}\\
+\helpref{wxMilliSleep}{wxmillisleep}\\
+\helpref{wxMicroSleep}{wxmicrosleep}\\
\helpref{wxMkdir}{wxmkdir}\\
\helpref{wxMutexGuiEnter}{wxmutexguienter}\\
\helpref{wxMutexGuiLeave}{wxmutexguileave}\\
\helpref{wxNow}{wxnow}\\
\helpref{wxOnAssert}{wxonassert}\\
\helpref{wxOpenClipboard}{wxopenclipboard}\\
+\helpref{wxParseCommonDialogsFilter}{wxparsecommondialogsfilter}\\
\helpref{wxPathOnly}{wxpathonly}\\
\helpref{wxPostDelete}{wxpostdelete}\\
\helpref{wxPostEvent}{wxpostevent}\\
\helpref{wxSysErrorCode}{wxsyserrorcode}\\
\helpref{wxSysErrorMsg}{wxsyserrormsg}\\
\helpref{wxT}{wxt}\\
-\helpref{wxToLower}{wxtolower}\\
-\helpref{wxToUpper}{wxtoupper}\\
\helpref{wxTraceLevel}{wxtracelevel}\\
\helpref{wxTrace}{wxtrace}\\
\helpref{wxTransferFileToStream}{wxtransferfiletostream}\\
\helpref{wxTransferStreamToFile}{wxtransferstreamtofile}\\
\helpref{wxTrap}{wxtrap}\\
+\helpref{wxULL}{wxull}\\
\helpref{wxUninitialize}{wxuninitialize}\\
\helpref{wxUnix2DosFilename}{wxunix2dosfilename}\\
\helpref{wxUnsetEnv}{wxunsetenv}\\
\helpref{wxUsleep}{wxusleep}\\
+\helpref{wxVaCopy}{wxvacopy}\\
\helpref{wxVsnprintf}{wxvsnprintf}\\
\helpref{wxWakeUpIdle}{wxwakeupidle}\\
\helpref{wxWriteResource}{wxwriteresource}\\
\helpref{wxYield}{wxyield}\\
+\helpref{wx\_const\_cast}{wxconstcastraw}\\
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw}\\
+\helpref{wx\_static\_cast}{wxstaticcastraw}\\
\helpref{\_}{underscore}\\
\helpref{\_T}{underscoret}
+
+
\section{Version macros}\label{versionfunctions}
-The following constants are defined in wxWindows:
+The following constants are defined in wxWidgets:
\begin{itemize}\itemsep=0pt
-\item {\tt wxMAJOR\_VERSION} is the major version of wxWindows
-\item {\tt wxMINOR\_VERSION} is the minor version of wxWindows
+\item {\tt wxMAJOR\_VERSION} is the major version of wxWidgets
+\item {\tt wxMINOR\_VERSION} is the minor version of wxWidgets
\item {\tt wxRELEASE\_NUMBER} is the release number
+\item {\tt wxSUBRELEASE\_NUMBER} is the subrelease number which is $0$ for all
+official releases
\end{itemize}
-For example, the values or these constants for wxWindows 2.1.15 are 2, 1 and
+For example, the values or these constants for wxWidgets 2.1.15 are 2, 1 and
15.
Additionally, {\tt wxVERSION\_STRING} is a user-readable string containing
-the full wxWindows version and {\tt wxVERSION\_NUMBER} is a combination of the
+the full wxWidgets version and {\tt wxVERSION\_NUMBER} is a combination of the
three version numbers above: for 2.1.15, it is 2115 and it is 2200 for
-wxWindows 2.2.
+wxWidgets 2.2.
+
+The subrelease number is only used for the sources in between official releases
+and so normally is not useful.
\wxheading{Include files}
<wx/version.h> or <wx/defs.h>
+
+\membersection{wxCHECK\_GCC\_VERSION}\label{wxcheckgccversion}
+
+\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+
+Returns $1$ if the compiler being used to compile the code is GNU C++
+compiler (g++) version major.minor.release or greater. Otherwise, and also if
+the compiler is not GNU C++ at all, returns $0$.
+
+
\membersection{wxCHECK\_VERSION}\label{wxcheckversion}
\func{bool}{wxCHECK\_VERSION}{\param{}{major, minor, release}}
-This is a macro which evaluates to true if the current wxWindows version is at
+This is a macro which evaluates to true if the current wxWidgets version is at
least major.minor.release.
-For example, to test if the program is compiled with wxWindows 2.2 or higher,
+For example, to test if the program is compiled with wxWidgets 2.2 or higher,
the following can be done:
\begin{verbatim}
}
\end{verbatim}
-\membersection{wxCHECK\_GCC\_VERSION}\label{wxcheckgccversion}
-\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+\membersection{wxCHECK\_VERSION\_FULL}\label{wxcheckversionfull}
+
+\func{bool}{wxCHECK\_VERSION\_FULL}{\param{}{major, minor, release, subrel}}
+
+Same as \helpref{wxCHECK\_VERSION}{wxcheckversion} but also checks that
+\texttt{wxSUBRELEASE\_NUMBER} is at least \arg{subrel}.
-Returns $1$ if the compiler being used to compile the code is GNU C++
-compiler (g++) version major.minor.release or greater. Otherwise, and also if
-the compiler is not GNU C++ at all, returns $0$.
\membersection{wxCHECK\_W32API\_VERSION}\label{wxcheckw32apiversion}
greater. Otherwise, and also if we are not compiling with mingw32/cygwin under
Win32 at all, returns $0$.
+
+
\section{Application initialization and termination}\label{appinifunctions}
The functions in this section are used on application startup/shutdown and also
to control the behaviour of the main event loop of the GUI programs.
+
\membersection{::wxEntry}\label{wxentry}
-This initializes wxWindows in a platform-dependent way. Use this if you
-are not using the default wxWindows entry code (e.g. main or WinMain). For example,
-you can initialize wxWindows from an Microsoft Foundation Classes application using
+This initializes wxWidgets in a platform-dependent way. Use this if you
+are not using the default wxWidgets entry code (e.g. main or WinMain). For example,
+you can initialize wxWidgets from an Microsoft Foundation Classes application using
this function.
\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
\param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = true}}
-wxWindows initialization under Windows (non-DLL). If {\it enterLoop} is false, the
-function will return immediately after calling wxApp::OnInit. Otherwise, the wxWindows
+wxWidgets initialization under Windows (non-DLL). If {\it enterLoop} is false, the
+function will return immediately after calling wxApp::OnInit. Otherwise, the wxWidgets
message loop will be entered.
\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
\param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
-wxWindows initialization under Windows (for applications constructed as a DLL).
+wxWidgets initialization under Windows (for applications constructed as a DLL).
\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
-wxWindows initialization under Unix.
+wxWidgets initialization under Unix.
\wxheading{Remarks}
-To clean up wxWindows, call wxApp::OnExit followed by the static function
-wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWindows:
+To clean up wxWidgets, call wxApp::OnExit followed by the static function
+wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWidgets:
\begin{verbatim}
int CTheApp::ExitInstance()
<wx/app.h>
+
\membersection{::wxGetApp}\label{wxgetapp}
\func{wxAppDerivedClass\&}{wxGetApp}{\void}
-This function doesn't exist in wxWindows but it is created by using
+This function doesn't exist in wxWidgets but it is created by using
the \helpref{IMPLEMENT\_APP}{implementapp} macro. Thus, before using it
anywhere but in the same module where this macro is used, you must make it
available using \helpref{DECLARE\_APP}{declareapp}.
allow you to access the functions specific to your application class but not
present in wxApp while wxGetApp() returns the object of the right type.
+
\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = true}}
Calling wxHandleFatalExceptions() with {\it doIt} equal to false will restore
this default behaviour.
+
\membersection{::wxInitAllImageHandlers}\label{wxinitallimagehandlers}
\func{void}{wxInitAllImageHandlers}{\void}
<wx/image.h>
+
\membersection{::wxInitialize}\label{wxinitialize}
\func{bool}{wxInitialize}{\void}
This function is used in wxBase only and only if you don't create
\helpref{wxApp}{wxapp} object at all. In this case you must call it from your
-{\tt main()} function before calling any other wxWindows functions.
+{\tt main()} function before calling any other wxWidgets functions.
If the function returns {\tt false} the initialization could not be performed,
in this case the library cannot be used and
<wx/app.h>
+
\membersection{::wxSafeYield}\label{wxsafeyield}
\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}, \param{bool}{
<wx/utils.h>
+
\membersection{::wxUninitialize}\label{wxuninitialize}
\func{void}{wxUninitialize}{\void}
<wx/app.h>
+
\membersection{::wxYield}\label{wxyield}
\func{bool}{wxYield}{\void}
<wx/app.h> or <wx/utils.h>
+
\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
\func{void}{wxWakeUpIdle}{\void}
<wx/event.h>
+
+
\section{Process control functions}\label{processfunctions}
The functions in this section are used to launch or terminate the other
processes.
+
\membersection{::wxExecute}\label{wxexecute}
\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{int }{sync = wxEXEC\_ASYNC}, \param{wxProcess *}{callback = NULL}}
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteCommand}}
+
\func{long}{wxExecute}{\param{char **}{argv}, \param{int }{flags = wxEXEC\_ASYNC}, \param{wxProcess *}{callback = NULL}}
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}}
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteArgs}}
+
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{int }{flags = 0}}
-\perlnote{In wxPerl this function only takes the {\tt command} argument,
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteStdout} and it
+only takes the {\tt command} argument,
and returns a 2-element list {\tt ( status, output )}, where {\tt output} is
an array reference.}
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}}
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}, \param{int }{flags = 0}}
-\perlnote{In wxPerl this function only takes the {\tt command} argument,
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteStdoutStderr}
+and it only takes the {\tt command} argument,
and returns a 3-element list {\tt ( status, output, errors )}, where
{\tt output} and {\tt errors} are array references.}
the process (which terminates by the moment the function returns) and will be
$-1$ if the process couldn't be started and typically 0 if the process
terminated successfully. Also, while waiting for the process to
-terminate, wxExecute will call \helpref{wxYield}{wxyield}. The caller
-should ensure that this can cause no recursion, in the simplest case by
-calling \helpref{wxEnableTopLevelWindows(false)}{wxenabletoplevelwindows}.
+terminate, wxExecute will call \helpref{wxYield}{wxyield}. Because of this, by
+default this function disables all application windows to avoid unexpected
+reentrancies which could result from the users interaction with the program
+while the child process is running. If you are sure that it is safe to not
+disable the program windows, you may pass \texttt{wxEXEC\_NODISABLE} flag to
+prevent this automatic disabling from happening.
For asynchronous execution, however, the return value is the process id and
zero value indicates that the command could not be executed. As an added
Under Unix the flag {\tt wxEXEC\_MAKE\_GROUP\_LEADER} may be used to ensure
that the new process is a group leader (this will create a new session if
-needed). Calling \helpref{wxKill}{wxkill} with the argument of -pid where pid
-is the process ID of the new process will kill this process as well as all of
-its children (except those which have started their own session).
+needed). Calling \helpref{wxKill}{wxkill} passing wxKILL\_CHILDREN will
+will kill this process as well as all of its children (except those which have
+started their own session).
Finally, you may use the third overloaded version of this function to execute
-a process (always synchronously) and capture its output in the array
-{\it output}. The fourth version adds the possibility to additionally capture
-the messages from standard error output in the {\it errors} array.
+a process (always synchronously, the contents of \arg{flags} is or'd with
+\textt{wxEXEC\_SYNC}) and capture its output in the array \arg{output}. The
+fourth version adds the possibility to additionally capture the messages from
+standard error output in the \arg{errors} array.
{\bf NB:} Currently wxExecute() can only be used from the main thread, calling
this function from another thread will result in an assert failure in debug
array, any additional ones are the command parameters and the array must be
terminated with a NULL pointer.}
-\docparam{flags}{Combination of bit masks {\tt wxEXEC\_ASYNC},
+\docparam{flags}{Combination of bit masks {\tt wxEXEC\_ASYNC},\rtfsp
{\tt wxEXEC\_SYNC} and {\tt wxEXEC\_NOHIDE}}
\docparam{callback}{An optional pointer to \helpref{wxProcess}{wxprocess}}
<wx/utils.h>
+
\membersection{::wxExit}\label{wxexit}
\func{void}{wxExit}{\void}
<wx/app.h>
+
\membersection{::wxKill}\label{wxkill}
-\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}}
+\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}, \param{int }{flags = 0}}
Equivalent to the Unix kill function: send the given signal {\it sig} to the
process with PID {\it pid}. The valid signal values are
\end{verbatim}
{\tt wxSIGNONE}, {\tt wxSIGKILL} and {\tt wxSIGTERM} have the same meaning
-under both Unix and Windows but all the other signals are equivalent to
+under both Unix and Windows but all the other signals are equivalent to
{\tt wxSIGTERM} under Windows.
Returns 0 on success, -1 on failure. If {\it rc} parameter is not NULL, it will
};
\end{verbatim}
+The {\it flags} parameter can be wxKILL\_NOCHILDREN (the default),
+or wxKILL\_CHILDREN, in which case the child processes of this
+process will be killed too. Note that under Unix, for wxKILL\_CHILDREN
+to work you should have created the process by passing wxEXEC\_MAKE_GROUP\_LEADER
+to wxExecute.
+
\wxheading{See also}
\helpref{wxProcess::Kill}{wxprocesskill},\rtfsp
<wx/utils.h>
+
\membersection{::wxGetProcessId}\label{wxgetprocessid}
\func{unsigned long}{wxGetProcessId}{\void}
<wx/utils.h>
+
\membersection{::wxShell}\label{wxshell}
\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
<wx/utils.h>
+
\membersection{::wxShutdown}\label{wxshutdown}
\func{bool}{wxShutdown}{\param{wxShutdownFlags}{flags}}
<wx/utils.h>
+
+
\section{Thread functions}\label{threadfunctions}
The functions and macros here mainly exist to make it writing the code which
\helpref{wxThread}{wxthread}, \helpref{wxMutex}{wxmutex}, \helpref{Multithreading overview}{wxthreadoverview}
+
\membersection{wxCRIT\_SECT\_DECLARE}\label{wxcritsectdeclare}
\func{}{wxCRIT\_SECT\_DECLARE}{\param{}{cs}}
{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
\membersection{wxCRIT\_SECT\_DECLARE\_MEMBER}\label{wxcritsectdeclaremember}
\func{}{wxCRIT\_SECT\_DECLARE}{\param{}{cs}}
a class or struct member which explains its name.
+
\membersection{wxCRIT\_SECT\_LOCKER}\label{wxcritsectlocker}
\func{}{wxCRIT\_SECT\_LOCKER}{\param{}{name}, \param{}{cs}}
{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
\membersection{wxCRITICAL\_SECTION}\label{wxcriticalsectionmacro}
\func{}{wxCRITICAL\_SECTION}{\param{}{name}}
{\bf not} be used and the critical section must be made a global instead).
+
\membersection{wxENTER\_CRIT\_SECT}\label{wxentercritsect}
\func{}{wxENTER\_CRIT\_SECT}{\param{wxCriticalSection\& }{cs}}
-This macro is equivalent to \helpref{cs.Enter()}{wxcriticalsectionenter} if
+This macro is equivalent to \helpref{cs.Enter()}{wxcriticalsectionenter} if
{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
\membersection{::wxIsMainThread}\label{wxismainthread}
\func{bool}{wxIsMainThread}{\void}
{\tt wxUSE\_THREADS} is $0$.
+
\membersection{wxLEAVE\_CRIT\_SECT}\label{wxleavecritsect}
\func{}{wxLEAVE\_CRIT\_SECT}{\param{wxCriticalSection\& }{cs}}
-This macro is equivalent to \helpref{cs.Leave()}{wxcriticalsectionleave} if
+This macro is equivalent to \helpref{cs.Leave()}{wxcriticalsectionleave} if
{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
\membersection{::wxMutexGuiEnter}\label{wxmutexguienter}
\func{void}{wxMutexGuiEnter}{\void}
This function is only defined on platforms which support preemptive
threads.
+
\membersection{::wxMutexGuiLeave}\label{wxmutexguileave}
\func{void}{wxMutexGuiLeave}{\void}
This function is only defined on platforms which support preemptive
threads.
+
+
\section{File functions}\label{filefunctions}
\wxheading{Include files}
-<wx/utils.h>
+<wx/filefn.h>
\wxheading{See also}
\helpref{wxFile}{wxfile}\\
\helpref{wxFileName}{wxfilename}
+
\membersection{::wxDirExists}\label{functionwxdirexists}
\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
Returns true if the directory exists.
+
\membersection{::wxDos2UnixFilename}\label{wxdos2unixfilename}
\func{void}{wxDos2UnixFilename}{\param{wxChar *}{s}}
Converts a DOS to a Unix filename by replacing backslashes with forward
slashes.
+
\membersection{::wxFileExists}\label{functionwxfileexists}
\func{bool}{wxFileExists}{\param{const wxString\& }{filename}}
-Returns true if the file exists. It also returns true if the file is
-a directory.
+Returns true if the file exists and is a plain file.
+
\membersection{::wxFileModificationTime}\label{wxfilemodificationtime}
Returns time of last modification of given file.
+
\membersection{::wxFileNameFromPath}\label{wxfilenamefrompath}
\func{wxString}{wxFileNameFromPath}{\param{const wxString\& }{path}}
Returns the filename for a full path. The second form returns a pointer to
temporary storage that should not be deallocated.
+
\membersection{::wxFindFirstFile}\label{wxfindfirstfile}
\func{wxString}{wxFindFirstFile}{\param{const char *}{spec}, \param{int}{ flags = 0}}
get the next matching file. Neither will report the current directory "." or the
parent directory "..".
+\wxheading{Warning}
+
+As of wx 2.5.2, these functions are not thread-safe! (use static variables)
+
{\it spec} may contain wildcards.
{\it flags} may be wxDIR for restricting the query to directories, wxFILE for files or zero for either.
}
\end{verbatim}
+
\membersection{::wxFindNextFile}\label{wxfindnextfile}
\func{wxString}{wxFindNextFile}{\void}
See \helpref{wxFindFirstFile}{wxfindfirstfile} for an example.
+
\membersection{::wxGetDiskSpace}\label{wxgetdiskspace}
\func{bool}{wxGetDiskSpace}{\param{const wxString\& }{path}, \param{wxLongLong }{*total = NULL}, \param{wxLongLong }{*free = NULL}}
\wxheading{Portability}
-This function is implemented for Win16 (only for drives less than 2Gb), Win32,
+This function is implemented for Win32,
Mac OS and generic Unix provided the system has {\tt statfs()} function.
-This function first appeared in wxWindows 2.3.2.
+This function first appeared in wxWidgets 2.3.2.
+
\membersection{::wxGetOSDirectory}\label{wxgetosdirectory}
Returns the Windows directory under Windows; on other platforms returns the empty string.
+
\membersection{::wxIsAbsolutePath}\label{wxisabsolutepath}
\func{bool}{wxIsAbsolutePath}{\param{const wxString\& }{filename}}
Returns true if the argument is an absolute filename, i.e. with a slash
or drive name at the beginning.
+
\membersection{::wxPathOnly}\label{wxpathonly}
\func{wxString}{wxPathOnly}{\param{const wxString\& }{path}}
Returns the directory part of the filename.
+
\membersection{::wxUnix2DosFilename}\label{wxunix2dosfilename}
\func{void}{wxUnix2DosFilename}{\param{const wxString\& }{s}}
Converts a Unix to a DOS filename by replacing forward
slashes with backslashes.
+
+\membersection{wxCHANGE\_UMASK}\label{wxchangeumask}
+
+\func{}{wxCHANGE\_UMASK}{\param{int }{mask}}
+
+Under Unix this macro changes the current process umask to the given value,
+unless it is equal to $-1$ in which case nothing is done, and restores it to
+the original value on scope exit. It works by declaring a variable which sets
+umask to \arg{mask} in its constructor and restores it in its destructor.
+
+Under other platforms this macro expands to nothing.
+
+
\membersection{::wxConcatFiles}\label{wxconcatfiles}
\func{bool}{wxConcatFiles}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2},
Concatenates {\it file1} and {\it file2} to {\it file3}, returning
true if successful.
+
\membersection{::wxCopyFile}\label{wxcopyfile}
\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = true}}
if it exists, but if {\it overwrite} is false, the functions fails in this
case.
+
\membersection{::wxGetCwd}\label{wxgetcwd}
\func{wxString}{wxGetCwd}{\void}
Returns a string containing the current (or working) directory.
+
\membersection{::wxGetWorkingDirectory}\label{wxgetworkingdirectory}
\func{wxString}{wxGetWorkingDirectory}{\param{char *}{buf=NULL}, \param{int }{sz=1000}}
{\bf NB:} This function is obsolete: use \helpref{wxGetCwd}{wxgetcwd} instead.
Copies the current working directory into the buffer if supplied, or
-copies the working directory into new storage (which you must delete yourself)
-if the buffer is NULL.
+copies the working directory into new storage (which you {\emph must} delete
+yourself) if the buffer is NULL.
{\it sz} is the size of the buffer if supplied.
+
\membersection{::wxGetTempFileName}\label{wxgettempfilename}
\func{char *}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char *}{buf=NULL}}
\helpref{wxFileName::CreateTempFileName}{wxfilenamecreatetempfilename}\rtfsp
instead.
+
\membersection{::wxIsWild}\label{wxiswild}
\func{bool}{wxIsWild}{\param{const wxString\& }{pattern}}
Returns true if the pattern contains wildcards. See \helpref{wxMatchWild}{wxmatchwild}.
+
\membersection{::wxMatchWild}\label{wxmatchwild}
\func{bool}{wxMatchWild}{\param{const wxString\& }{pattern}, \param{const wxString\& }{text}, \param{bool}{ dot\_special}}
-Returns true if the {\it pattern}\/ matches the {\it text}\/; if {\it
+Returns true if the \arg{pattern}\/ matches the {\it text}\/; if {\it
dot\_special}\/ is true, filenames beginning with a dot are not matched
with wildcard characters. See \helpref{wxIsWild}{wxiswild}.
+
\membersection{::wxMkdir}\label{wxmkdir}
\func{bool}{wxMkdir}{\param{const wxString\& }{dir}, \param{int }{perm = 0777}}
-Makes the directory {\it dir}, returning true if successful.
+Makes the directory \arg{dir}, returning true if successful.
{\it perm} is the access mask for the directory for the systems on which it is
supported (Unix) and doesn't have effect for the other ones.
+
+\membersection{::wxParseCommonDialogsFilter}\label{wxparsecommondialogsfilter}
+
+\func{int}{wxParseCommonDialogsFilter}{\param{const wxString\& }{wildCard}, \param{wxArrayString\& }{descriptions}, \param{wxArrayString\& }{filters}}
+
+Parses the \arg{wildCard}, returning the number of filters.
+Returns 0 if none or if there's a problem.
+The arrays will contain an equal number of items found before the error.
+On platforms where native dialogs handle only one filter per entry,
+entries in arrays are automatically adjusted.
+\arg{wildCard} is in the form:
+\begin{verbatim}
+ "All files (*)|*|Image Files (*.jpeg *.png)|*.jpg;*.png"
+\end{verbatim}
+
\membersection{::wxRemoveFile}\label{wxremovefile}
\func{bool}{wxRemoveFile}{\param{const wxString\& }{file}}
-Removes {\it file}, returning true if successful.
+Removes \arg{file}, returning true if successful.
+
\membersection{::wxRenameFile}\label{wxrenamefile}
\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
-Renames {\it file1} to {\it file2}, returning true if successful.
+Renames \arg{file1} to \arg{file2}, returning true if successful.
+
\membersection{::wxRmdir}\label{wxrmdir}
The {\it flags} parameter is reserved for future use.
+
\membersection{::wxSetWorkingDirectory}\label{wxsetworkingdirectory}
\func{bool}{wxSetWorkingDirectory}{\param{const wxString\& }{dir}}
Sets the current working directory, returning true if the operation succeeded.
Under MS Windows, the current drive is also changed if {\it dir} contains a drive specification.
+
\membersection{::wxSplitPath}\label{wxsplitfunction}
\func{void}{wxSplitPath}{\param{const char *}{ fullname}, \param{wxString *}{ path}, \param{wxString *}{ name}, \param{wxString *}{ ext}}
strings pointed to by these parameters will be overwritten in any case (if the pointers
are not NULL).
+
\membersection{::wxTransferFileToStream}\label{wxtransferfiletostream}
\func{bool}{wxTransferFileToStream}{\param{const wxString\& }{filename}, \param{ostream\& }{stream}}
<wx/docview.h>
+
\membersection{::wxTransferStreamToFile}\label{wxtransferstreamtofile}
\func{bool}{wxTransferStreamToFile}{\param{istream\& }{stream} \param{const wxString\& }{filename}}
<wx/docview.h>
+
+
\section{Network, user and OS functions}\label{networkfunctions}
The functions in this section are used to retrieve information about the
current computer and/or user characteristics.
+
\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
\func{long}{wxGetFreeMemory}{\void}
<wx/utils.h>
+
\membersection{::wxGetFullHostName}\label{wxgetfullhostname}
\func{wxString}{wxGetFullHostName}{\void}
<wx/utils.h>
+
\membersection{::wxGetEmailAddress}\label{wxgetemailaddress}
\func{bool}{wxGetEmailAddress}{\param{const wxString\& }{buf}, \param{int }{sz}}
<wx/utils.h>
+
\membersection{::wxGetHomeDir}\label{wxgethomedir}
\func{wxString}{wxGetHomeDir}{\void}
<wx/utils.h>
+
\membersection{::wxGetHostName}\label{wxgethostname}
\func{wxString}{wxGetHostName}{\void}
Under Windows or NT, this function first looks in the environment
variable SYSTEM\_NAME; if this is not found, the entry {\bf HostName}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file is tried.
+in the {\bf wxWidgets} section of the WIN.INI file is tried.
The first variant of this function returns the hostname if successful or an
empty string otherwise. The second (deprecated) function returns true
<wx/utils.h>
+
\membersection{::wxGetUserId}\label{wxgetuserid}
\func{wxString}{wxGetUserId}{\void}
Under Windows or NT, this function first looks in the environment
variables USER and LOGNAME; if neither of these is found, the entry {\bf UserId}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file is tried.
+in the {\bf wxWidgets} section of the WIN.INI file is tried.
The first variant of this function returns the login name if successful or an
empty string otherwise. The second (deprecated) function returns true
<wx/utils.h>
+
\membersection{::wxGetOsDescription}\label{wxgetosdescription}
\func{wxString}{wxGetOsDescription}{\void}
<wx/utils.h>
+
\membersection{::wxGetOsVersion}\label{wxgetosversion}
\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
<wx/utils.h>
+
\membersection{::wxGetUserHome}\label{wxgetuserhome}
\func{const wxChar *}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
<wx/utils.h>
+
\membersection{::wxGetUserName}\label{wxgetusername}
\func{wxString}{wxGetUserName}{\void}
This function returns the full user name (something like "Mr. John Smith").
Under Windows or NT, this function looks for the entry {\bf UserName}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file. If PenWindows
+in the {\bf wxWidgets} section of the WIN.INI file. If PenWindows
is running, the entry {\bf Current} in the section {\bf User} of
the PENWIN.INI file is used.
<wx/utils.h>
-\section{String functions}
+
+
+\section{String functions}\label{stringfunctions}
+
\membersection{::copystring}\label{copystring}
This function is deprecated, use \helpref{wxString}{wxstring} class instead.
+
\membersection{::wxGetTranslation}\label{wxgettranslation}
\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
+\func{const char *}{wxGetTranslation}{\param{const char * }{str}, \param{const char * }{strPlural}, \param{size\_t }{n}}
+
This function returns the translation of string {\it str} in the current
\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
message catalogs (see \helpref{internationalization overview}{internationalization}), the
provided: the \helpref{\_()}{underscore} macro is defined to do the same thing
as wxGetTranslation.
+The second form is used when retrieving translation of string that has
+different singular and plural form in English or different plural forms in some
+other language. It takes two extra arguments: \arg{str}
+parameter must contain the singular form of the string to be converted.
+It is also used as the key for the search in the catalog.
+The \arg{strPlural} parameter is the plural form (in English).
+The parameter \arg{n} is used to determine the plural form. If no
+message catalog is found \arg{str} is returned if `n == 1',
+otherwise \arg{strPlural}.
+See \urlref{GNU gettext manual}{http://www.gnu.org/manual/gettext/html\_chapter/gettext\_10.html\#SEC150} for additional information on plural forms handling.
+
+Both versions call \helpref{wxLocale::GetString}{wxlocalegetstring}.
+
\membersection{::wxIsEmpty}\label{wxisempty}
\func{bool}{wxIsEmpty}{\param{const char *}{ p}}
Returns {\tt true} if the pointer is either {\tt NULL} or points to an empty
string, {\tt false} otherwise.
+
\membersection{::wxStrcmp}\label{wxstrcmp}
\func{int}{wxStrcmp}{\param{const char *}{p1}, \param{const char *}{p2}}
This function complements the standard C function {\it stricmp()} which performs
case-insensitive comparison.
+
\membersection{::wxStricmp}\label{wxstricmp}
\func{int}{wxStricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
This function complements the standard C function {\it strcmp()} which performs
case-sensitive comparison.
+
\membersection{::wxStringMatch}\label{wxstringmatch}
\func{bool}{wxStringMatch}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2},\\
ignoring case if {\it exact} is false. If {\it subString} is {\tt false},
no substring matching is done.
+
\membersection{::wxStringEq}\label{wxstringeq}
\func{bool}{wxStringEq}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2}}
#define wxStringEq(s1, s2) (s1 && s2 && (strcmp(s1, s2) == 0))
\end{verbatim}
+
\membersection{::wxStrlen}\label{wxstrlen}
\func{size\_t}{wxStrlen}{\param{const char *}{ p}}
same thing (i.e. returns the length of the string) except that it returns 0 if
{\it p} is the {\tt NULL} pointer.
+
\membersection{::wxSnprintf}\label{wxsnprintf}
\func{int}{wxSnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{}{...}}
\helpref{wxVsnprintf}{wxvsnprintf}, \helpref{wxString::Printf}{wxstringprintf}
+
\membersection{wxT}\label{wxt}
\func{wxChar}{wxT}{\param{char }{ch}}
#endif
\end{verbatim}
+
\membersection{wxTRANSLATE}\label{wxtranslate}
\func{const wxChar *}{wxTRANSLATE}{\param{const char *}{s}}
This macro doesn't do anything in the program code -- it simply expands to the
-value of its argument (expand in Unicode build where it is equivalent to
+value of its argument (except in Unicode build where it is equivalent to
\helpref{wxT}{wxt} which makes it unnecessary to use both wxTRANSLATE and wxT
with the same string which would be really unreadable).
However it does have a purpose and it is to mark the literal strings for the
extraction into the message catalog created by {\tt xgettext} program. Usually
this is achieved using \helpref{\_()}{underscore} but that macro not only marks
-the string for extraction but also expands into
+the string for extraction but also expands into a
\helpref{wxGetTranslation}{wxgettranslation} function call which means that it
-cannot be used in some situations, notably for the static arrays
+cannot be used in some situations, notably for static array
initialization.
Here is an example which should make it more clear: suppose that you have a
static array of strings containing the weekday names and which have to be
-translated (note that it is a bad example, really, as
+translated (note that it is a bad example, really, as
\helpref{wxDateTime}{wxdatetime} already can be used to get the localized week
day names already). If you write
+
\begin{verbatim}
static const wxChar * const weekdays[] = { _("Mon"), ..., _("Sun") };
...
// use weekdays[n] as usual
\end{verbatim}
+
the code wouldn't compile because the function calls are forbidden in the array
initializer. So instead you should do
+
\begin{verbatim}
static const wxChar * const weekdays[] = { wxTRANSLATE("Mon"), ..., wxTRANSLATE("Sun") };
...
// use wxGetTranslation(weekdays[n])
\end{verbatim}
+
here.
Note that although the code {\bf would} compile if you simply omit
no translations for the weekday names in the program message catalog and
wxGetTranslation wouldn't find them.
-
-\membersection{::wxToLower}\label{wxtolower}
-
-\func{char}{wxToLower}{\param{char }{ch}}
-
-Converts the character to lower case. This is implemented as a macro for efficiency.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxToUpper}\label{wxtoupper}
-
-\func{char}{wxToUpper}{\param{char }{ch}}
-
-Converts the character to upper case. This is implemented as a macro for efficiency.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
\membersection{::wxVsnprintf}\label{wxvsnprintf}
\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argPtr}}
\helpref{wxSnprintf}{wxsnprintf}, \helpref{wxString::PrintfV}{wxstringprintfv}
+
\membersection{\_}\label{underscore}
\func{const wxChar *}{\_}{\param{const char *}{s}}
\func{const wxChar *}{\_T}{\param{const wxChar }{ch}}
This macro is exactly the same as \helpref{wxT}{wxt} and is defined in
-wxWindows simply because it may be more intuitive for Windows programmers as
+wxWidgets simply because it may be more intuitive for Windows programmers as
the standard Win32 headers also define it (as well as yet another name for the
same macro which is {\tt \_TEXT()}).
Don't confuse this macro with \helpref{\_()}{underscore}!
-\membersection{\_}\label{underscore}
+
\section{Dialog functions}\label{dialogfunctions}
parameter, or (in MS Windows or Motif) the wrong window frame may be brought to
the front when the dialog box is popped up.
+
\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
<wx/utils.h>
+
\membersection{::wxBell}\label{wxbell}
\func{void}{wxBell}{\void}
<wx/utils.h>
+
\membersection{::wxCreateFileTipProvider}\label{wxcreatefiletipprovider}
\func{wxTipProvider *}{wxCreateFileTipProvider}{\param{const wxString\& }{filename},
<wx/tipdlg.h>
+
\membersection{::wxDirSelector}\label{wxdirselector}
\func{wxString}{wxDirSelector}{\param{const wxString\& }{message = wxDirSelectorPromptStr},\\
<wx/dirdlg.h>
+
\membersection{::wxFileSelector}\label{wxfileselector}
\func{wxString}{wxFileSelector}{\param{const wxString\& }{message}, \param{const wxString\& }{default\_path = ""},\\
\param{const wxString\& }{default\_filename = ""}, \param{const wxString\& }{default\_extension = ""},\\
- \param{const wxString\& }{wildcard = ``*.*''}, \param{int }{flags = 0}, \param{wxWindow *}{parent = ""},\\
+ \param{const wxString\& }{wildcard = "*.*"}, \param{int }{flags = 0}, \param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1}}
Pops up a file selector box. In Windows, this is the common file selector
no default filename will be supplied. The wildcard determines what files
are displayed in the file selector, and file extension supplies a type
extension for the required filename. Flags may be a combination of wxOPEN,
-wxSAVE, wxOVERWRITE\_PROMPT, wxHIDE\_READONLY, wxFILE\_MUST\_EXIST, wxMULTIPLE or 0.
+wxSAVE, wxOVERWRITE\_PROMPT, wxFILE\_MUST\_EXIST, wxMULTIPLE or 0.
Both the Unix and Windows versions implement a wildcard filter. Typing a
filename containing wildcards (*, ?) in the filename text item, and
<wx/filedlg.h>
+
\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
\func{void}{wxEndBusyCursor}{\void}
<wx/utils.h>
+
\membersection{::wxGetColourFromUser}\label{wxgetcolourfromuser}
\func{wxColour}{wxGetColourFromUser}{\param{wxWindow *}{parent}, \param{const wxColour\& }{colInit}}
<wx/colordlg.h>
+
\membersection{::wxGetFontFromUser}\label{wxgetfontfromuser}
\func{wxFont}{wxGetFontFromUser}{\param{wxWindow *}{parent}, \param{const wxFont\& }{fontInit}}
<wx/fontdlg.h>
+
\membersection{::wxGetMultipleChoices}\label{wxgetmultiplechoices}
\func{size\_t}{wxGetMultipleChoices}{\\
and {\tt choices}, and no {\tt selections} parameter; the function
returns an array containing the user selections.}
+
\membersection{::wxGetNumberFromUser}\label{wxgetnumberfromuser}
\func{long}{wxGetNumberFromUser}{
\wxheading{Include files}
-<wx/textdlg.h>
+<wx/numdlg.h>
+
\membersection{::wxGetPasswordFromUser}\label{wxgetpasswordfromuser}
-\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
- \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL}}
+\func{wxString}{wxGetPasswordFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
+ \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = wxDefaultCoord}, \param{int}{ y = wxDefaultCoord}, \param{bool}{ centre = true}}
Similar to \helpref{wxGetTextFromUser}{wxgettextfromuser} but the text entered
in the dialog is not shown on screen but replaced with stars. This is intended
<wx/textdlg.h>
+
\membersection{::wxGetTextFromUser}\label{wxgettextfromuser}
\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
\param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
- \param{int}{ x = -1}, \param{int}{ y = -1}, \param{bool}{ centre = true}}
+ \param{int}{ x = wxDefaultCoord}, \param{int}{ y = wxDefaultCoord}, \param{bool}{ centre = true}}
Pop up a dialog box with title set to {\it caption}, {\it message}, and a
\rtfsp{\it default\_value}. The user may type in text and press OK to return this text,
<wx/textdlg.h>
+
\membersection{::wxGetMultipleChoice}\label{wxgetmultiplechoice}
\func{int}{wxGetMultipleChoice}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
<wx/choicdlg.h>
+
\membersection{::wxGetSingleChoice}\label{wxgetsinglechoice}
\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message},\\
\perlnote{In wxPerl there is just an array reference in place of {\tt n}
and {\tt choices}.}
+
\membersection{::wxGetSingleChoiceIndex}\label{wxgetsinglechoiceindex}
\func{int}{wxGetSingleChoiceIndex}{\param{const wxString\& }{message},\\
\perlnote{In wxPerl there is just an array reference in place of {\tt n}
and {\tt choices}.}
+
\membersection{::wxGetSingleChoiceData}\label{wxgetsinglechoicedata}
\func{wxString}{wxGetSingleChoiceData}{\param{const wxString\& }{message},\\
and {\tt choices}, and the client data array must have the
same length as the choices array.}
+
\membersection{::wxIsBusy}\label{wxisbusy}
\func{bool}{wxIsBusy}{\void}
<wx/utils.h>
+
\membersection{::wxMessageBox}\label{wxmessagebox}
\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK},\\
int answer = wxMessageBox("Quit program?", "Confirm",
wxYES_NO | wxCANCEL, main_frame);
if (answer == wxYES)
- delete main_frame;
+ main_frame->Close();
...
\end{verbatim}
<wx/msgdlg.h>
+
\membersection{::wxShowTip}\label{wxshowtip}
\func{bool}{wxShowTip}{\param{wxWindow *}{parent},
\param{bool }{showAtStartup = true}}
This function shows a "startup tip" to the user. The return value is the
-state of the ``Show tips at startup'' checkbox.
+state of the `Show tips at startup' checkbox.
\docparam{parent}{The parent window for the modal dialog}
<wx/tipdlg.h>
-\section{Math functions}
+
+
+\section{Math functions}\label{mathfunctions}
\wxheading{Include files}
<wx/math.h>
+
\membersection{wxFinite}\label{wxfinite}
\func{int}{wxFinite}{\param{double }{x}}
Returns a non-zero value if {\it x} is neither infinite or NaN (not a number),
returns 0 otherwise.
+
\membersection{wxIsNaN}\label{wxisnan}
\func{bool}{wxIsNaN}{\param{double }{x}}
otherwise.
+
+
\section{GDI functions}\label{gdifunctions}
The following are relevant to the GDI (Graphics Device Interface).
<wx/gdicmn.h>
+
\membersection{wxBITMAP}\label{wxbitmapmacro}
\func{}{wxBITMAP}{bitmapName}
<wx/gdicmn.h>
+
\membersection{::wxClientDisplayRect}\label{wxclientdisplayrect}
\func{void}{wxClientDisplayRect}{\param{int *}{x}, \param{int *}{y},
are currently defaulting to the whole display until a way is found to
provide this info for all window managers, etc.
+
\membersection{::wxColourDisplay}\label{wxcolourdisplay}
\func{bool}{wxColourDisplay}{\void}
Returns true if the display is colour, false otherwise.
+
\membersection{::wxDisplayDepth}\label{wxdisplaydepth}
\func{int}{wxDisplayDepth}{\void}
Returns the depth of the display (a value of 1 denotes a monochrome display).
+
\membersection{::wxDisplaySize}\label{wxdisplaysize}
\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
Returns the display size in pixels.
+
\membersection{::wxDisplaySizeMM}\label{wxdisplaysizemm}
\func{void}{wxDisplaySizeMM}{\param{int *}{width}, \param{int *}{height}}
Returns the display size in millimeters.
+
\membersection{::wxDROP\_ICON}\label{wxdropicon}
\func{wxIconOrCursor}{wxDROP\_ICON}{\param{const char *}{name}}
<wx/dnd.h>
+
\membersection{wxICON}\label{wxiconmacro}
\func{}{wxICON}{iconName}
<wx/gdicmn.h>
+
\membersection{::wxMakeMetafilePlaceable}\label{wxmakemetafileplaceable}
\func{bool}{wxMakeMetafilePlaceable}{\param{const wxString\& }{filename}, \param{int }{minX}, \param{int }{minY},
SetWindowExt(dc, maxX - minX, maxY - minY);
\end{verbatim}
-This simulates the wxMM\_TEXT mapping mode, which wxWindows assumes.
+This simulates the wxMM\_TEXT mapping mode, which wxWidgets assumes.
Placeable metafiles may be imported by many Windows applications, and can be
used in RTF (Rich Text Format) files.
This function is only available under Windows.
+
\membersection{::wxSetCursor}\label{wxsetcursor}
\func{void}{wxSetCursor}{\param{wxCursor *}{cursor}}
Globally sets the cursor; only has an effect in Windows and GTK.
See also \helpref{wxCursor}{wxcursor}, \helpref{wxWindow::SetCursor}{wxwindowsetcursor}.
+
+
\section{Printer settings}\label{printersettings}
{\bf NB:} These routines are obsolete and should no longer be used!
<wx/dcps.h>
+
\membersection{::wxGetPrinterCommand}\label{wxgetprintercommand}
\func{wxString}{wxGetPrinterCommand}{\void}
Gets the printer command used to print a file. The default is {\tt lpr}.
+
\membersection{::wxGetPrinterFile}\label{wxgetprinterfile}
\func{wxString}{wxGetPrinterFile}{\void}
Gets the PostScript output filename.
+
\membersection{::wxGetPrinterMode}\label{wxgetprintermode}
\func{int}{wxGetPrinterMode}{\void}
Gets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.
+
\membersection{::wxGetPrinterOptions}\label{wxgetprinteroptions}
\func{wxString}{wxGetPrinterOptions}{\void}
Gets the additional options for the print command (e.g. specific printer). The default is nothing.
+
\membersection{::wxGetPrinterOrientation}\label{wxgetprinterorientation}
\func{int}{wxGetPrinterOrientation}{\void}
Gets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
+
\membersection{::wxGetPrinterPreviewCommand}\label{wxgetprinterpreviewcommand}
\func{wxString}{wxGetPrinterPreviewCommand}{\void}
Gets the command used to view a PostScript file. The default depends on the platform.
+
\membersection{::wxGetPrinterScaling}\label{wxgetprinterscaling}
\func{void}{wxGetPrinterScaling}{\param{float *}{x}, \param{float *}{y}}
Gets the scaling factor for PostScript output. The default is 1.0, 1.0.
+
\membersection{::wxGetPrinterTranslation}\label{wxgetprintertranslation}
\func{void}{wxGetPrinterTranslation}{\param{float *}{x}, \param{float *}{y}}
Gets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
+
\membersection{::wxSetPrinterCommand}\label{wxsetprintercommand}
\func{void}{wxSetPrinterCommand}{\param{const wxString\& }{command}}
Sets the printer command used to print a file. The default is {\tt lpr}.
+
\membersection{::wxSetPrinterFile}\label{wxsetprinterfile}
\func{void}{wxSetPrinterFile}{\param{const wxString\& }{filename}}
Sets the PostScript output filename.
+
\membersection{::wxSetPrinterMode}\label{wxsetprintermode}
\func{void}{wxSetPrinterMode}{\param{int }{mode}}
Sets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.
+
\membersection{::wxSetPrinterOptions}\label{wxsetprinteroptions}
\func{void}{wxSetPrinterOptions}{\param{const wxString\& }{options}}
Sets the additional options for the print command (e.g. specific printer). The default is nothing.
+
\membersection{::wxSetPrinterOrientation}\label{wxsetprinterorientation}
\func{void}{wxSetPrinterOrientation}{\param{int}{ orientation}}
Sets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
+
\membersection{::wxSetPrinterPreviewCommand}\label{wxsetprinterpreviewcommand}
\func{void}{wxSetPrinterPreviewCommand}{\param{const wxString\& }{command}}
Sets the command used to view a PostScript file. The default depends on the platform.
+
\membersection{::wxSetPrinterScaling}\label{wxsetprinterscaling}
\func{void}{wxSetPrinterScaling}{\param{float }{x}, \param{float }{y}}
Sets the scaling factor for PostScript output. The default is 1.0, 1.0.
+
\membersection{::wxSetPrinterTranslation}\label{wxsetprintertranslation}
\func{void}{wxSetPrinterTranslation}{\param{float }{x}, \param{float }{y}}
Sets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
+
+
\section{Clipboard functions}\label{clipsboard}
These clipboard functions are implemented for Windows only. The use of these functions
<wx/clipbrd.h>
+
\membersection{::wxClipboardOpen}\label{functionwxclipboardopen}
\func{bool}{wxClipboardOpen}{\void}
Returns true if this application has already opened the clipboard.
+
\membersection{::wxCloseClipboard}\label{wxcloseclipboard}
\func{bool}{wxCloseClipboard}{\void}
Closes the clipboard to allow other applications to use it.
+
\membersection{::wxEmptyClipboard}\label{wxemptyclipboard}
\func{bool}{wxEmptyClipboard}{\void}
Empties the clipboard.
+
\membersection{::wxEnumClipboardFormats}\label{wxenumclipboardformats}
\func{int}{wxEnumClipboardFormats}{\param{int}{dataFormat}}
Before it enumerates the formats function, an application must open the clipboard by using the
wxOpenClipboard function.
+
\membersection{::wxGetClipboardData}\label{wxgetclipboarddata}
\func{wxObject *}{wxGetClipboardData}{\param{int}{dataFormat}}
The clipboard must have previously been opened for this call to succeed.
+
\membersection{::wxGetClipboardFormatName}\label{wxgetclipboardformatname}
\func{bool}{wxGetClipboardFormatName}{\param{int}{dataFormat}, \param{const wxString\& }{formatName}, \param{int}{maxCount}}
Gets the name of a registered clipboard format, and puts it into the buffer {\it formatName} which is of maximum
length {\it maxCount}. {\it dataFormat} must not specify a predefined clipboard format.
+
\membersection{::wxIsClipboardFormatAvailable}\label{wxisclipboardformatavailable}
\func{bool}{wxIsClipboardFormatAvailable}{\param{int}{dataFormat}}
Returns true if the given data format is available on the clipboard.
+
\membersection{::wxOpenClipboard}\label{wxopenclipboard}
\func{bool}{wxOpenClipboard}{\void}
Opens the clipboard for passing data to it or getting data from it.
+
\membersection{::wxRegisterClipboardFormat}\label{wxregisterclipboardformat}
\func{int}{wxRegisterClipboardFormat}{\param{const wxString\& }{formatName}}
Registers the clipboard data format name and returns an identifier.
+
\membersection{::wxSetClipboardData}\label{wxsetclipboarddata}
\func{bool}{wxSetClipboardData}{\param{int}{dataFormat}, \param{wxObject *}{data}, \param{int}{width}, \param{int}{height}}
The clipboard must have previously been opened for this call to succeed.
+
+
\section{Miscellaneous functions}\label{miscellany}
+
+\membersection{wxCONCAT}\label{wxconcat}
+
+\func{}{wxCONCAT}{\param{}{x}, \param{}{y}}
+
+This macro returns the concatenation of two tokens \arg{x} and \arg{y}.
+
+
\membersection{wxDYNLIB\_FUNCTION}\label{wxdynlibfunction}
\func{}{wxDYNLIB\_FUNCTION}{\param{}{type}, \param{}{name}, \param{}{dynlib}}
When loading a function from a DLL you always have to cast the returned
-\tt{void *} pointer to the correct type and, even more annoyingly, you have to
+{\tt void *} pointer to the correct type and, even more annoyingly, you have to
repeat this type twice if you want to declare and define a function pointer all
in one line
This macro makes this slightly less painful by allowing you to specify the
type only once, as the first parameter, and creating a variable of this type
named after the function but with {\tt pfn} prefix and initialized with the
-function \arg{name} from the \helpref{wxDynamicLibrary}{wxDynamicLibrary}
+function \arg{name} from the \helpref{wxDynamicLibrary}{wxdynamiclibrary}
\arg{dynlib}.
\wxheading{Parameters}
\docparam{dynlib}{the library to load the function from}
+
\membersection{wxEXPLICIT}\label{wxexplicit}
{\tt wxEXPLICIT} is a macro which expands to the C++ {\tt explicit} keyword if
code which might have to be compiled with an old compiler without support for
this language feature but still take advantage of it when it is available.
+
+\membersection{::wxGetKeyState}\label{wxgetkeystate}
+
+\func{bool}{wxGetKeyState}{\param{wxKeyCode }{key}}
+
+Returns \true if the key parameter is currently pressed on the keyboard, or
+with modifier keys, (caps lock, etc) if the key is active (the led light is
+on).
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{wxLL}\label{wxll}
\func{wxLongLong\_t}{wxLL}{\param{}{number}}
<wx/longlong.h>
+\wxheading{See also}
+
+\helpref{wxULL}{wxull}, \helpref{wxLongLong}{wxlonglong}
+
+
\membersection{wxLongLongFmtSpec}\label{wxlonglongfmtspec}
This macro is defined to contain the {\tt printf()} format specifier using
<wx/longlong.h>
+
\membersection{::wxNewId}\label{wxnewid}
\func{long}{wxNewId}{\void}
<wx/utils.h>
+
\membersection{::wxRegisterId}\label{wxregisterid}
\func{void}{wxRegisterId}{\param{long}{ id}}
<wx/utils.h>
+
\membersection{::wxDDECleanUp}\label{wxddecleanup}
\func{void}{wxDDECleanUp}{\void}
-Called when wxWindows exits, to clean up the DDE system. This no longer needs to be
+Called when wxWidgets exits, to clean up the DDE system. This no longer needs to be
called by the application.
See also \helpref{wxDDEInitialize}{wxddeinitialize}.
<wx/dde.h>
+
\membersection{::wxDDEInitialize}\label{wxddeinitialize}
\func{void}{wxDDEInitialize}{\void}
Initializes the DDE system. May be called multiple times without harm.
This no longer needs to be called by the application: it will be called
-by wxWindows if necessary.
+by wxWidgets if necessary.
-See also \helpref{wxDDEServer}{wxddeserver}, \helpref{wxDDEClient}{wxddeclient}, \helpref{wxDDEConnection}{wxddeconnection},
+See also \helpref{wxDDEServer}{wxddeserver}, \helpref{wxDDEClient}{wxddeclient}, \helpref{wxDDEConnection}{wxddeconnection},\rtfsp
\helpref{wxDDECleanUp}{wxddecleanup}.
\wxheading{Include files}
<wx/dde.h>
+
\membersection{::wxEnableTopLevelWindows}\label{wxenabletoplevelwindows}
\func{void}{wxEnableTopLevelWindow}{\param{bool}{ enable = true}}
<wx/utils.h>
+
\membersection{::wxFindMenuItemId}\label{wxfindmenuitemid}
\func{int}{wxFindMenuItemId}{\param{wxFrame *}{frame}, \param{const wxString\& }{menuString}, \param{const wxString\& }{itemString}}
<wx/utils.h>
+
\membersection{::wxFindWindowByLabel}\label{wxfindwindowbylabel}
\func{wxWindow *}{wxFindWindowByLabel}{\param{const wxString\& }{label}, \param{wxWindow *}{parent=NULL}}
<wx/utils.h>
+
\membersection{::wxFindWindowByName}\label{wxfindwindowbyname}
\func{wxWindow *}{wxFindWindowByName}{\param{const wxString\& }{name}, \param{wxWindow *}{parent=NULL}}
<wx/utils.h>
+
\membersection{::wxFindWindowAtPoint}\label{wxfindwindowatpoint}
\func{wxWindow *}{wxFindWindowAtPoint}{\param{const wxPoint\& }{pt}}
Find the deepest window at the given mouse position in screen coordinates,
returning the window if found, or NULL if not.
+
\membersection{::wxFindWindowAtPointer}\label{wxfindwindowatpointer}
\func{wxWindow *}{wxFindWindowAtPointer}{\param{wxPoint\& }{pt}}
Find the deepest window at the mouse pointer position, returning the window
and current pointer position in screen coordinates.
+
\membersection{::wxGetActiveWindow}\label{wxgetactivewindow}
\func{wxWindow *}{wxGetActiveWindow}{\void}
<wx/windows.h>
+
\membersection{::wxGetDisplayName}\label{wxgetdisplayname}
\func{wxString}{wxGetDisplayName}{\void}
<wx/utils.h>
+
\membersection{::wxGetMousePosition}\label{wxgetmouseposition}
\func{wxPoint}{wxGetMousePosition}{\void}
<wx/utils.h>
+
\membersection{::wxGetResource}\label{wxgetresource}
\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
<wx/utils.h>
+
\membersection{::wxGetTopLevelParent}\label{wxgettoplevelparent}
\func{wxWindow *}{wxGetTopLevelParent}{\param{wxWindow }{*win}}
<wx/window.h>
+
\membersection{::wxLoadUserResource}\label{wxloaduserresource}
\func{wxString}{wxLoadUserResource}{\param{const wxString\& }{resourceName}, \param{const wxString\& }{resourceType=``TEXT"}}
<wx/utils.h>
+
\membersection{::wxPostDelete}\label{wxpostdelete}
\func{void}{wxPostDelete}{\param{wxObject *}{object}}
<wx/utils.h>
+
\membersection{::wxPostEvent}\label{wxpostevent}
\func{void}{wxPostEvent}{\param{wxEvtHandler *}{dest}, \param{wxEvent\& }{event}}
<wx/app.h>
+
\membersection{::wxSetDisplayName}\label{wxsetdisplayname}
\func{void}{wxSetDisplayName}{\param{const wxString\& }{displayName}}
<wx/utils.h>
+
\membersection{::wxStripMenuCodes}\label{wxstripmenucodes}
\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{in}}
<wx/utils.h>
+
+\membersection{wxULL}\label{wxull}
+
+\func{wxLongLong\_t}{wxULL}{\param{}{number}}
+
+This macro is defined for the platforms with a native 64 bit integer type and
+allows to define unsigned 64 bit compile time constants:
+
+\begin{verbatim}
+ #ifdef wxLongLong_t
+ unsigned wxLongLong_t ll = wxULL(0x1234567890abcdef);
+ #endif
+\end{verbatim}
+
+\wxheading{Include files}
+
+<wx/longlong.h>
+
+\wxheading{See also}
+
+\helpref{wxLL}{wxll}, \helpref{wxLongLong}{wxlonglong}
+
+
+\membersection{wxVaCopy}\label{wxvacopy}
+
+\func{void}{wxVaCopy}{\param{va\_list }{argptrDst}, \param{va\_list}{argptrSrc}}
+
+This macro is the same as the standard C99 \texttt{va\_copy} for the compilers
+which support it or its replacement for those that don't. It must be used to
+preserve the value of a \texttt{va\_list} object if you need to use it after
+passing it to another function because it can be modified by the latter.
+
+As with \texttt{va\_start}, each call to \texttt{wxVaCopy} must have a matching
+\texttt{va\_end}.
+
+
\membersection{::wxWriteResource}\label{wxwriteresource}
\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
<wx/utils.h>
+
+
\section{Byte order macros}\label{byteordermacros}
The endian-ness issues (that is the difference between big-endian and
network) which is usually in some fixed, platform-independent format. The
macros are helpful for transforming the data to the correct format.
+
\membersection{wxINTXX\_SWAP\_ALWAYS}\label{intswapalways}
\func{wxInt32}{wxINT32\_SWAP\_ALWAYS}{\param{wxInt32 }{value}}
endian to big endian or vice versa unconditionally, i.e. independently of the
current platform.
+
\membersection{wxINTXX\_SWAP\_ON\_BE}\label{intswaponbe}
\func{wxInt32}{wxINT32\_SWAP\_ON\_BE}{\param{wxInt32 }{value}}
Use these macros to read data from and write data to a file that stores
data in little-endian (for example Intel i386) format.
+
\membersection{wxINTXX\_SWAP\_ON\_LE}\label{intswaponle}
\func{wxInt32}{wxINT32\_SWAP\_ON\_LE}{\param{wxInt32 }{value}}
Use these macros to read data from and write data to a file that stores
data in big-endian format.
+
+
\section{RTTI functions}\label{rttimacros}
-wxWindows uses its own RTTI ("run-time type identification") system which
+wxWidgets uses its own RTTI ("run-time type identification") system which
predates the current standard C++ RTTI and so is kept for backwards
compatibility reasons but also because it allows some things which the
standard RTTI doesn't directly support (such as creating a class from its
The standard C++ RTTI can be used in the user code without any problems and in
general you shouldn't need to use the functions and the macros in this section
-unless you are thinking of modifying or adding any wxWindows classes.
+unless you are thinking of modifying or adding any wxWidgets classes.
\wxheading{See also}
\helpref{RTTI overview}{runtimeclassoverview}
+
\membersection{CLASSINFO}\label{classinfo}
\func{wxClassInfo *}{CLASSINFO}{className}
<wx/object.h>
+
\membersection{DECLARE\_ABSTRACT\_CLASS}\label{declareabstractclass}
\func{}{DECLARE\_ABSTRACT\_CLASS}{className}
<wx/object.h>
+
\membersection{DECLARE\_APP}\label{declareapp}
\func{}{DECLARE\_APP}{className}
<wx/app.h>
+
\membersection{DECLARE\_CLASS}\label{declareclass}
\func{}{DECLARE\_CLASS}{className}
<wx/object.h>
+
\membersection{DECLARE\_DYNAMIC\_CLASS}\label{declaredynamicclass}
\func{}{DECLARE\_DYNAMIC\_CLASS}{className}
<wx/object.h>
+
\membersection{IMPLEMENT\_ABSTRACT\_CLASS}\label{implementabstractclass}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS}{className, baseClassName}
<wx/object.h>
+
\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}\label{implementabstractclass2}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
+
\membersection{IMPLEMENT\_APP}\label{implementapp}
\func{}{IMPLEMENT\_APP}{className}
This is used in the application class implementation file to make the application class known to
-wxWindows for dynamic construction. You use this instead of
+wxWidgets for dynamic construction. You use this instead of
Old form:
<wx/app.h>
+
\membersection{IMPLEMENT\_CLASS}\label{implementclass}
\func{}{IMPLEMENT\_CLASS}{className, baseClassName}
<wx/object.h>
+
\membersection{IMPLEMENT\_CLASS2}\label{implementclass2}
\func{}{IMPLEMENT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
+
\membersection{IMPLEMENT\_DYNAMIC\_CLASS}\label{implementdynamicclass}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS}{className, baseClassName}
<wx/object.h>
+
\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}\label{implementdynamicclass2}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
+
\membersection{wxConstCast}\label{wxconstcast}
\func{classname *}{wxConstCast}{ptr, classname}
\wxheading{See also}
+\helpref{wx\_const\_cast}{wxconstcastraw}\\
\helpref{wxDynamicCast}{wxdynamiccast}\\
\helpref{wxStaticCast}{wxstaticcast}
+
\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
Creates and returns an object of the given class, if the class has been
registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
+
\membersection{WXDEBUG\_NEW}\label{debugnew}
\func{}{WXDEBUG\_NEW}{arg}
<wx/object.h>
+
\membersection{wxDynamicCast}\label{wxdynamiccast}
\func{classname *}{wxDynamicCast}{ptr, classname}
\helpref{wxConstCast}{wxconstcast}\\
\helpref{wxStatiicCast}{wxstaticcast}
+
\membersection{wxDynamicCastThis}\label{wxdynamiccastthis}
\func{classname *}{wxDynamicCastThis}{classname}
\helpref{wxDynamicCast}{wxdynamiccast}
+
\membersection{wxStaticCast}\label{wxstaticcast}
\func{classname *}{wxStaticCast}{ptr, classname}
result if {\tt wxDynamicCast(ptr, classname) == NULL}) and then returns the
result of executing an equivalent of {\tt static\_cast<classname *>(ptr)}.
+\wxheading{See also}
+
+\helpref{wx\_static\_cast}{wxstaticcastraw}\\
\helpref{wxDynamicCast}{wxdynamiccast}\\
\helpref{wxConstCast}{wxconstcast}
+
+\membersection{wx\_const\_cast}\label{wxconstcastraw}
+
+\func{T}{wx\_const\_cast}{T, x}
+
+Same as \texttt{const\_cast<T>(x)} if the compiler supports const cast or
+\texttt{(T)x} for old compilers. Unlike \helpref{wxConstCast}{wxconstcast},
+the cast it to the type \arg{T} and not to \texttt{T *} and also the order of
+arguments is the same as for the standard cast.
+
+\wxheading{See also}
+
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw},\\
+\helpref{wx\_static\_cast}{wxstaticcastraw}
+
+
+\membersection{wx\_reinterpret\_cast}\label{wxreinterpretcastraw}
+
+\func{T}{wx\_reinterpret\_cast}{T, x}
+
+Same as \texttt{reinterpret\_cast<T>(x)} if the compiler supports reinterpret cast or
+\texttt{(T)x} for old compilers.
+
+\wxheading{See also}
+
+\helpref{wx\_const\_cast}{wxconstcastraw},\\
+\helpref{wx\_static\_cast}{wxstaticcastraw}
+
+
+\membersection{wx\_static\_cast}\label{wxstaticcastraw}
+
+\func{T}{wx\_static\_cast}{T, x}
+
+Same as \texttt{static\_cast<T>(x)} if the compiler supports static cast or
+\texttt{(T)x} for old compilers. Unlike \helpref{wxStaticCast}{wxstaticcast},
+there are no checks being done and the meaning of the macro arguments is exactly
+the same as for the standard static cast, i.e. \arg{T} is the full type name and
+star is not appended to it.
+
+\wxheading{See also}
+
+\helpref{wx\_const\_cast}{wxconstcastraw},\\
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw}
+
+
+
\section{Log functions}\label{logfunctions}
These functions provide a variety of logging functions: see \helpref{Log classes overview}{wxlogoverview} for
further information. The functions use (implicitly) the currently active log
target, so their descriptions here may not apply if the log target is not the
-standard one (installed by wxWindows in the beginning of the program).
+standard one (installed by wxWidgets in the beginning of the program).
\wxheading{Include files}
<wx/log.h>
+
\membersection{::wxDebugMsg}\label{wxdebugmsg}
\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
<wx/utils.h>
+
\membersection{::wxError}\label{wxerror}
-\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Internal Error"}}
+\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWidgets Internal Error"}}
{\bf NB:} This function is now obsolete, please use \helpref{wxLogError}{wxlogerror}
instead.
Displays {\it msg} and continues. This writes to standard error under
Unix, and pops up a message box under Windows. Used for internal
-wxWindows errors. See also \helpref{wxFatalError}{wxfatalerror}.
+wxWidgets errors. See also \helpref{wxFatalError}{wxfatalerror}.
\wxheading{Include files}
<wx/utils.h>
+
\membersection{::wxFatalError}\label{wxfatalerror}
-\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Fatal Error"}}
+\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWidgets Fatal Error"}}
{\bf NB:} This function is now obsolete, please use
\helpref{wxLogFatalError}{wxlogfatalerror} instead.
Displays {\it msg} and exits. This writes to standard error under Unix,
and pops up a message box under Windows. Used for fatal internal
-wxWindows errors. See also \helpref{wxError}{wxerror}.
+wxWidgets errors. See also \helpref{wxError}{wxerror}.
\wxheading{Include files}
<wx/utils.h>
+
\membersection{::wxLogError}\label{wxlogerror}
\func{void}{wxLogError}{\param{const char *}{formatString}, \param{...}{}}
to the user. The default processing is to pop up a message box to inform the
user about it.
+
\membersection{::wxLogFatalError}\label{wxlogfatalerror}
\func{void}{wxLogFatalError}{\param{const char *}{formatString}, \param{...}{}}
terminates the program with the exit code 3. Using {\it abort()} standard
function also terminates the program with this exit code.
+
\membersection{::wxLogWarning}\label{wxlogwarning}
\func{void}{wxLogWarning}{\param{const char *}{formatString}, \param{...}{}}
For warnings - they are also normally shown to the user, but don't interrupt
the program work.
+
\membersection{::wxLogMessage}\label{wxlogmessage}
\func{void}{wxLogMessage}{\param{const char *}{formatString}, \param{...}{}}
that the later error messages make the informational messages preceding them
meaningless.
+
\membersection{::wxLogVerbose}\label{wxlogverbose}
\func{void}{wxLogVerbose}{\param{const char *}{formatString}, \param{...}{}}
might be activated if the user wishes to know more details about the program
progress (another, but possibly confusing name for the same function is {\bf wxLogInfo}).
+
\membersection{::wxLogStatus}\label{wxlogstatus}
\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{...}{}}
If the target frame doesn't have a statusbar, the message will be lost.
+
\membersection{::wxLogSysError}\label{wxlogsyserror}
\func{void}{wxLogSysError}{\param{const char *}{formatString}, \param{...}{}}
\func{void}{wxVLogSysError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
-Mostly used by wxWindows itself, but might be handy for logging errors after
+Mostly used by wxWidgets itself, but might be handy for logging errors after
system call (API function) failure. It logs the specified message text as well
as the last system error code ({\it errno} or {\it ::GetLastError()} depending
on the platform) and the corresponding error message. The second form
\helpref{wxSysErrorCode}{wxsyserrorcode},
\helpref{wxSysErrorMsg}{wxsyserrormsg}
+
\membersection{::wxLogDebug}\label{wxlogdebug}
\func{void}{wxLogDebug}{\param{const char *}{formatString}, \param{...}{}}
mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expand to
nothing in release mode (otherwise).
+
\membersection{::wxLogTrace}\label{wxlogtrace}
\func{void}{wxLogTrace}{\param{const char *}{formatString}, \param{...}{}}
For the second function (taking a string mask), the message is logged only if
the mask has been previously enabled by the call to
-\helpref{AddTraceMask}{wxlogaddtracemask}. The predefined string trace masks
-used by wxWindows are:
+\helpref{AddTraceMask}{wxlogaddtracemask} or by setting
+\helpref{{\tt WXTRACE} environment variable}{envvars}.
+The predefined string trace masks
+used by wxWidgets are:
\begin{itemize}\itemsep=0pt
\item wxTRACE\_MemAlloc: trace memory allocation (new/delete)
\item wxTRACE\_OleCalls: trace OLE method calls (Win32 only)
\end{itemize}
-The third version of the function only logs the message if all the bit
+{\bf Caveats:} since both the mask and the format string are strings,
+this might lead to function signature confusion in some cases:
+if you intend to call the format string only version of wxLogTrace,
+then add a \%s format string parameter and then supply a second string parameter for that \%s, the string mask version of wxLogTrace will erroneously get called instead, since you are supplying two string parameters to the function.
+In this case you'll unfortunately have to avoid having two leading
+string parameters, e.g. by adding a bogus integer (with its \%d format string).
+
+The third version of the function only logs the message if all the bits
corresponding to the {\it mask} are set in the wxLog trace mask which can be
set by \helpref{SetTraceMask}{wxlogsettracemask}. This version is less
flexible than the previous one because it doesn't allow defining the user
\item wxTraceOleCalls: trace OLE method calls (Win32 only)
\end{itemize}
+
\membersection{::wxSafeShowMessage}\label{wxsafeshowmessage}
\func{void}{wxSafeShowMessage}{\param{const wxString\& }{title}, \param{const wxString\& }{text}}
<wx/log.h>
+
\membersection{::wxSysErrorCode}\label{wxsyserrorcode}
\func{unsigned long}{wxSysErrorCode}{\void}
\helpref{wxSysErrorMsg}{wxsyserrormsg},
\helpref{wxLogSysError}{wxlogsyserror}
+
\membersection{::wxSysErrorMsg}\label{wxsyserrormsg}
\func{const wxChar *}{wxSysErrorMsg}{\param{unsigned long }{errCode = 0}}
\helpref{wxSysErrorCode}{wxsyserrorcode},
\helpref{wxLogSysError}{wxlogsyserror}
+
\membersection{WXTRACE}\label{trace}
\wxheading{Include files}
<wx/memory.h>
+
\membersection{WXTRACELEVEL}\label{tracelevel}
\func{}{WXTRACELEVEL}{level, formatString, ...}
<wx/memory.h>
+
\membersection{::wxTrace}\label{wxtrace}
\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
<wx/memory.h>
+
\membersection{::wxTraceLevel}\label{wxtracelevel}
\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
<wx/memory.h>
+
+
\section{Time functions}\label{timefunctions}
The functions in this section deal with getting the current time and
\helpref{wxDateTime::Now}{wxdatetimenow} or
\helpref{wxDateTime::UNow}{wxdatetimeunow} methods.
+
\membersection{::wxGetElapsedTime}\label{wxgetelapsedtime}
\func{long}{wxGetElapsedTime}{\param{bool}{ resetTimer = true}}
<wx/timer.h>
+
\membersection{::wxGetLocalTime}\label{wxgetlocaltime}
\func{long}{wxGetLocalTime}{\void}
<wx/timer.h>
+
\membersection{::wxGetLocalTimeMillis}\label{wxgetlocaltimemillis}
\func{wxLongLong}{wxGetLocalTimeMillis}{\void}
<wx/timer.h>
+
\membersection{::wxGetUTCTime}\label{wxgetutctime}
\func{long}{wxGetUTCTime}{\void}
<wx/timer.h>
+
+\membersection{::wxMicroSleep}\label{wxmicrosleep}
+
+\func{void}{wxMicroSleep}{\param{unsigned long}{ microseconds}}
+
+Sleeps for the specified number of microseconds. The microsecond resolution may
+not, in fact, be available on all platforms (currently only Unix platforms with
+nanosleep(2) may provide it) in which case this is the same as
+\helpref{wxMilliSleep}{wxmillisleep}(\arg{microseconds}$/1000$).
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxMilliSleep}\label{wxmillisleep}
+
+\func{void}{wxMilliSleep}{\param{unsigned long}{ milliseconds}}
+
+Sleeps for the specified number of milliseconds. Notice that usage of this
+function is encouraged instead of calling usleep(3) directly because the
+standard usleep() function is not MT safe.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{::wxNow}\label{wxnow}
\func{wxString}{wxNow}{\void}
<wx/utils.h>
+
\membersection{::wxSleep}\label{wxsleep}
\func{void}{wxSleep}{\param{int}{ secs}}
<wx/utils.h>
+
\membersection{::wxStartTimer}\label{wxstarttimer}
\func{void}{wxStartTimer}{\void}
<wx/timer.h>
+
\membersection{::wxUsleep}\label{wxusleep}
\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
-Sleeps for the specified number of milliseconds. Notice that usage of this
-function is encouraged instead of calling usleep(3) directly because the
-standard usleep() function is not MT safe.
+This function is deprecated because its name is misleading: notice that the
+argument is in milliseconds, not microseconds. Please use either
+\helpref{wxMilliSleep}{wxmillisleep} or \helpref{wxMicroSleep}{wxmicrosleep}
+depending on the resolution you need.
-\wxheading{Include files}
-<wx/utils.h>
\section{Debugging macros and functions}\label{debugmacros}
Useful macros and functions for error checking and defensive programming.
-wxWindows defines three families of the assert-like macros:
+wxWidgets defines three families of the assert-like macros:
the wxASSERT and wxFAIL macros only do anything if \_\_WXDEBUG\_\_ is defined
(in other words, in the debug build) but disappear completely in the release
build. On the other hand, the wxCHECK macros stay event in release builds but a
<wx/debug.h>
+
\membersection{::wxOnAssert}\label{wxonassert}
\func{void}{wxOnAssert}{\param{const char *}{fileName}, \param{int}{ lineNumber}, \param{const char *}{cond}, \param{const char *}{msg = NULL}}
\helpref{wxApp::OnAssert}{wxapponassert} which is called by this function if
the global application object exists.
+
\membersection{wxASSERT}\label{wxassert}
\func{}{wxASSERT}{\param{}{condition}}
\helpref{wxASSERT\_MSG}{wxassertmsg},\\
\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
\membersection{wxASSERT\_MIN\_BITSIZE}\label{wxassertminbitsize}
\func{}{wxASSERT\_MIN\_BITSIZE}{\param{}{type}, \param{}{size}}
wxASSERT_MIN_BITSIZE(wchar_t, 16);
\end{verbatim}
+
\membersection{wxASSERT\_MSG}\label{wxassertmsg}
\func{}{wxASSERT\_MSG}{\param{}{condition}, \param{}{msg}}
\helpref{wxASSERT}{wxassert},\\
\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
\membersection{wxCOMPILE\_TIME\_ASSERT}\label{wxcompiletimeassert}
\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}}
either change the line in which either of them appears on or use the
\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2} macro.
+Also note that Microsoft Visual C++ has a bug which results in compiler errors
+if you use this macro with `Program Database For Edit And Continue'
+(\texttt{/ZI}) option, so you shouldn't use it (`Program Database'
+(\texttt{/Zi}) is ok though) for the code making use of this macro.
+
\wxheading{See also}
\helpref{wxASSERT\_MSG}{wxassertmsg},\\
\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}
+
\membersection{wxCOMPILE\_TIME\_ASSERT2}\label{wxcompiletimeassert2}
\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}, \param{}{name}}
internally defined by this macro to avoid getting the compilation errors
described \helpref{above}{wxcompiletimeassert}.
+
\membersection{wxFAIL}\label{wxfail}
\func{}{wxFAIL}{\void}
See also: \helpref{wxFAIL\_MSG}{wxfailmsg}
+
\membersection{wxFAIL\_MSG}\label{wxfailmsg}
\func{}{wxFAIL\_MSG}{\param{}{msg}}
\helpref{wxFAIL}{wxfail}
+
\membersection{wxCHECK}\label{wxcheck}
\func{}{wxCHECK}{\param{}{condition}, \param{}{retValue}}
Checks that the condition is true, returns with the given return value if not (FAILs in debug mode).
This check is done even in release mode.
+
\membersection{wxCHECK\_MSG}\label{wxcheckmsg}
\func{}{wxCHECK\_MSG}{\param{}{condition}, \param{}{retValue}, \param{}{msg}}
This macro may be only used in non void functions, see also
\helpref{wxCHECK\_RET}{wxcheckret}.
+
\membersection{wxCHECK\_RET}\label{wxcheckret}
\func{}{wxCHECK\_RET}{\param{}{condition}, \param{}{msg}}
This macro should be used in void functions instead of
\helpref{wxCHECK\_MSG}{wxcheckmsg}.
+
\membersection{wxCHECK2}\label{wxcheck2}
\func{}{wxCHECK2}{\param{}{condition}, \param{}{operation}}
This check is done even in release mode.
+
\membersection{wxCHECK2\_MSG}\label{wxcheck2msg}
\func{}{wxCHECK2}{\param{}{condition}, \param{}{operation}, \param{}{msg}}
\helpref{wxFAIL\_MSG}{wxfailmsg} with the specified {\it msg} is called
instead of wxFAIL() if the {\it condition} is false.
+
\membersection{::wxTrap}\label{wxtrap}
\func{void}{wxTrap}{\void}
<wx/debug.h>
+
\membersection{::wxIsDebuggerRunning}\label{wxisdebuggerrunning}
\func{bool}{wxIsDebuggerRunning}{\void}
using CodeWarrior and always returns {\tt false} elsewhere.
+
+
\section{Environment access functions}\label{environfunctions}
The functions in this section allow to access (get) or change value of
<wx/utils.h>
+
\membersection{wxGetenv}\label{wxgetenvmacro}
\func{wxChar *}{wxGetEnv}{\param{const wxString\&}{ var}}
with \helpref{wxSetEnv}{wxsetenv}, use \helpref{wxGetEnv}{wxgetenv} function
instead.
+
\membersection{wxGetEnv}\label{wxgetenv}
\func{bool}{wxGetEnv}{\param{const wxString\&}{ var}, \param{wxString *}{value}}
Returns {\tt true} if the variable exists, {\tt false} otherwise.
+
\membersection{wxSetEnv}\label{wxsetenv}
\func{bool}{wxSetEnv}{\param{const wxString\&}{ var}, \param{const wxChar *}{value}}
Returns {\tt true} on success.
+
\membersection{wxUnsetEnv}\label{wxunsetenv}
\func{bool}{wxUnsetEnv}{\param{const wxString\&}{ var}}
projects / wxWidgets.git / blobdiff