/**
- @page page_port Platform details
+@page page_port Platform Details
- wxWidgets defines a common API across platforms, but uses the native graphical
- user interface (GUI) on each platform, so your program will take on the native
- look and feel that users are familiar with. Unfortunately native toolkits and
- hardware do not always support the functionality that the wxWidgets API
- requires. This chapter collects notes about differences among supported platforms
- and ports.
+wxWidgets defines a common API across platforms, but uses the native graphical
+user interface (GUI) on each platform, so your program will take on the native
+look and feel that users are familiar with. Unfortunately native toolkits and
+hardware do not always support the functionality that the wxWidgets API
+requires. This chapter collects notes about differences among supported platforms
+and ports.
- @li @ref page_port_wxgtk
- @li @ref page_port_wxmac
- @li @ref page_port_wxos2
- @li @ref page_port_wxmgl
- @li @ref page_port_wxx11
- @li @ref page_port_wxmsw
- @li @ref page_port_nativedocs
+@li @ref page_port_wxgtk
+@li @ref page_port_wxmac
+@li @ref page_port_wxcocoa
+@li @ref page_port_wxos2
+@li @ref page_port_wxmgl
+@li @ref page_port_wxx11
+@li @ref page_port_wxmsw
+@li @ref page_port_nativedocs
- <hr>
+<hr>
- @section page_port_wxgtk wxGTK
+@section page_port_wxgtk wxGTK
- @htmlonly
-
<img src="gtk_logo.png" alt="GTK logo" title="GTK logo" class="logo">
- @endhtmlonly
+@htmlonly
+<img src="gtk_logo.png" alt="GTK logo" title="GTK logo" class="logo">
+@endhtmlonly
- wxGTK is a port of wxWidgets using the GTK+ library.
- It makes use of GTK+'s native widgets wherever possible and uses
- wxWidgets' generic controls when needed. GTK+ itself has been
- ported to a number of systems, but so far only the original X11
- version is supported. Support for other GTK+ backends is planned,
- such as the new DirectFB backend.
+wxGTK is a port of wxWidgets using the GTK+ library.
+It makes use of GTK+'s native widgets wherever possible and uses
+wxWidgets' generic controls when needed. GTK+ itself has been
+ported to a number of systems, but so far only the original X11
+version is supported. Support for other GTK+ backends is planned,
+such as the new DirectFB backend.
- All work is being done on GTK+ version 2.0 and above. Support for
- GTK+ 1.2 will be deprecated in a later release.
+All work is being done on GTK+ version 2.0 and above. Support for
+GTK+ 1.2 will be deprecated in a later release.
- You will need GTK+ 2.0 or higher which is available from:
+You will need GTK+ 2.6 or higher which is available from:
- http://www.gtk.org
+http://www.gtk.org
- The newer version of GTK+ you use, the more native widgets and
- features will be utilized. We have gone to a great extent to
- allow compiling wxWidgets applications with a latest version of
- GTK+, with the resulting binary working on systems even with a
- much lower version of GTK+. You will have to ensure that the
- application is launched with lazy symbol binding for that.
+The newer version of GTK+ you use, the more native widgets and
+features will be utilized. We have gone to a great extent to
+allow compiling wxWidgets applications with a latest version of
+GTK+, with the resulting binary working on systems even with a
+much lower version of GTK+. You will have to ensure that the
+application is launched with lazy symbol binding for that.
- In order to configure wxWidgets to compile wxGTK you will
- need use the @c --with-gtk argument to the @c configure script.
- This is the default for many systems.
+In order to configure wxWidgets to compile wxGTK you will
+need use the @c --with-gtk argument to the @c configure script.
+This is the default for many systems.
- GTK+ 1.2 can still be used, albeit discouraged. For that you can
- pass @c --with-gtk=1 to the @c configure script.
+GTK+ 1.2 can still be used, albeit discouraged. For that you can
+pass @c --with-gtk=1 to the @c configure script.
- For further information, please see the files in docs/gtk
- in the distribution.
+For further information, please see the files in docs/gtk
+in the distribution.
- @section page_port_wxmac wxMac
+@section page_port_wxmac wxMac
- @htmlonly
-
<img src="osxleopard_logo.png" alt="Mac OS X (Leopard) logo"
- title="Mac OS X (Leopard) logo" class="logo">
- @endhtmlonly
+@htmlonly
+<img src="osxleopard_logo.png" alt="Mac OS X (Leopard) logo"
+ title="Mac OS X (Leopard) logo" class="logo">
+@endhtmlonly
- wxMac is a port of wxWidgets for the Macintosh OS platform.
- Currently MacOS 8.6 or higher, MacOS 9.0 or higher and
- MacOS X 10.0 or higher are supported, although most development
- effort goes into MacOS X support. wxMac can be compiled both
- using Apple's developer tools and MetroWerks CodeWarrior in
- different versions. Support for MacOS 8.X and MacOS 9.X is
- only available through CodeWarrior. wxMac uses the Carbon
- API (and optionally the Classic API under MacOS 8.X). You
- will need wxWidgets version 2.3.3 or higher for a stable
- version of wxMac.
+wxMac is a port of wxWidgets for the Macintosh OS platform.
+Currently MacOS X 10.4 or higher are supported. wxMac can
+be compiled both using Apple's command line developer tools
+as well as Apple's XCode IDE. wxMac supports both the Intel
+and PowerPC architectures and can be used to produce
+"universal binaries" in order create application which can run
+both architecture. Unfortunately, wxMac does not support any
+64-bit architecture since Apple decided not to port its Carbon
+API entirely to 64-bit.
- For further information, please see the files in docs/mac
- in the distribution.
+For further information, please see the files in docs/mac
+in the distribution.
+@section page_port_wxmac wxCocoa
- @section page_port_wxmgl wxMGL
+@htmlonly
+<img src="osxleopard_logo.png" alt="Mac OS X (Leopard) logo"
+ title="Mac OS X (Leopard) logo" class="logo">
+@endhtmlonly
- wxMGL is a port of wxWidgets using the MGL library available
- from SciTech as the underlying graphics backend. wxMGL draws
- its widgets using the wxUniversal widget set which is now
- part of wxWidgets. MGL itself runs on a variety of platforms
- including DOS, Linux hardware (similar to the Linux framebuffer)
- and various graphics systems such as Win32, X11 and OS/2.
- Note that currently MGL for Linux runs only on x86-based systems.
+wxCocoa is another port of wxWidgets for the Macintosh OS
+platform. But in contrat to wxMac, it uses the Cocoa API.
+Much work has gone into this port and many controls are
+functional, but the port has not reached the maturity
+of the wxMac port yet. It should be possible to use wxCocoa
+on 64-bit architectures.
- You will need wxWidgets 2.3.3 or higher and MGL 5.0 or higher.
- The latter is available from
- http://www.scitechsoft.com/products/product_download.html
+@section page_port_wxmgl wxMGL
- In order to configure wxWidgets to compile wxMGL you will
- need to type:
+wxMGL is a port of wxWidgets using the MGL library available
+from SciTech as the underlying graphics backend. wxMGL draws
+its widgets using the wxUniversal widget set which is part
+of wxWidgets. MGL itself runs on a variety of platforms
+including DOS, Linux hardware (similar to the Linux framebuffer)
+and various graphics systems such as Win32, X11 and OS/2.
+Note that currently MGL for Linux runs only on x86-based systems.
- @verbatim configure --with-mgl --with-universal @endverbatim
+You will MGL 5.0 or higher which is available from
- Under DOS, wxMGL uses a dmake based make system.
+http://www.scitechsoft.com/products/product_download.html
- For further information, please see the files in docs/mgl
- in the distribution.
+In order to configure wxWidgets to compile wxMGL you will
+need to type:
+@verbatim configure --with-mgl --with-universal @endverbatim
+Under DOS, wxMGL uses a dmake based make system.
- @section page_port_wxos2 wxOS2
+For further information, please see the files in docs/mgl
+in the distribution.
- wxOS2 is a port of wxWidgets for the IBM OS/2 Warp3 and Warp4 platforms.
- This port is currently under construction and in beta phase.
- For more info about OS2 see:
+@section page_port_wxos2 wxOS2
+wxOS2 is a port of wxWidgets for the IBM OS/2 Warp3 and Warp4 platforms.
+This port is currently under construction and in beta phase.
- @section page_port_wxx11 wxX11
- @htmlonly
- <img src="x11_logo.png" alt="X.org logo" title="X.org logo" class="logo">
- @endhtmlonly
+@section page_port_wxx11 wxX11
- wxX11 is a port of wxWidgets using X11 (The X Window System)
- as the underlying graphics backend. wxX11 draws its widgets
- using the wxUniversal widget set which is now part of wxWidgets.
- wxX11 is well-suited for a number of special applications such
- as those running on systems with few resources (PDAs) or for
- applications which need to use a special themed look. You will need
- wxWidgets 2.3.2 or higher.
+@htmlonly
+<img src="x11_logo.png" alt="X.org logo" title="X.org logo" class="logo">
+@endhtmlonly
- In order to configure wxWidgets to compile wxX11 you will
- need to type:
+wxX11 is a port of wxWidgets using X11 (The X Window System)
+as the underlying graphics backend. wxX11 draws its widgets
+using the wxUniversal widget set which is now part of wxWidgets.
+wxX11 is well-suited for a number of special applications such
+as those running on systems with few resources (PDAs) or for
+applications which need to use a special themed look.
- @verbatim configure --with-x11 --with-universal @endverbatim
+In order to configure wxWidgets to compile wxX11 you will
+need to type:
- For further information, please see the files in docs/x11
- in the distribution. There is also a page on the use of
- wxWidgets for embedded applications on the wxWidgets web site.
+@verbatim configure --with-x11 --with-universal @endverbatim
+For further information, please see the files in docs/x11
+in the distribution. There is also a page on the use of
+wxWidgets for embedded applications on the wxWidgets web site.
- @section page_port_wxmsw wxMSW
- @htmlonly
- <img src="win_logo.png" alt="Windows logo" title="Windows logo" class="logo">
- @endhtmlonly
+@section page_port_wxmsw wxMSW
- wxMSW is a port of wxWidgets for the Windows platforms
- including Windows 95, 98, ME, 2000, NT, XP in ANSI and
- Unicode mode (for Windows 95 through the MSLU extension
- library). wxMSW ensures native look and feel for XP
- as well when using wxWidgets version 2.3.3 or higher.
- wxMSW can be compile with a great variety of compilers
- including MS VC++, Borland 5.5, MinGW32, Cygwin and
- Watcom as well as cross-compilation with a Linux hosted
- MinGW32 tool chain.
+@htmlonly
+<img src="win_logo.png" alt="Windows logo" title="Windows logo" class="logo">
+@endhtmlonly
- For further information, please see the files in docs/msw
- in the distribution.
+wxMSW is a port of wxWidgets for the Windows platforms
+including Windows 95, 98, ME, 2000, NT, XP in ANSI and
+Unicode mode (for Windows 95 through the MSLU extension
+library). wxMSW ensures native look and feel for XP
+as well when using wxWidgets version 2.3.3 or higher.
+wxMSW can be compile with a great variety of compilers
+including MS VC++, Borland 5.5, MinGW32, Cygwin and
+Watcom as well as cross-compilation with a Linux hosted
+MinGW32 tool chain.
- @subsection page_port_wxmsw_themedborders Themed borders on Windows
+For further information, please see the files in docs/msw
+in the distribution.
- Starting with wxWidgets 2.8.5, you can specify the wxBORDER_THEME style to have wxWidgets
- use a themed border. Using the default XP theme, this is a thin 1-pixel blue border,
- with an extra 1-pixel border in the window client background colour (usually white) to
- separate the client area's scrollbars from the border.
+@subsection page_port_wxmsw_themedborders Themed borders on Windows
- If you don't specify a border style for a wxTextCtrl in rich edit mode, wxWidgets now gives
- the control themed borders automatically, where previously they would take the Windows 95-style
- sunken border. Other native controls such as wxTextCtrl in non-rich edit mode, and wxComboBox,
- already paint themed borders where appropriate. To use themed borders on other windows, such
- as wxPanel, pass the wxBORDER_THEME style, or (apart from wxPanel) pass no border style.
+Starting with wxWidgets 2.8.5, you can specify the @c wxBORDER_THEME style to have wxWidgets
+use a themed border. Using the default XP theme, this is a thin 1-pixel blue border,
+with an extra 1-pixel border in the window client background colour (usually white) to
+separate the client area's scrollbars from the border.
- In general, specifying wxBORDER_THEME will cause a border of some kind to be used, chosen by the platform
- and control class. To leave the border decision entirely to wxWidgets, pass wxBORDER_DEFAULT.
- This is not to be confused with specifying wxBORDER_NONE, which says that there should
- definitely be @e no border.
+If you don't specify a border style for a wxTextCtrl in rich edit mode, wxWidgets now gives
+the control themed borders automatically, where previously they would take the Windows 95-style
+sunken border. Other native controls such as wxTextCtrl in non-rich edit mode, and wxComboBox,
+already paint themed borders where appropriate. To use themed borders on other windows, such
+as wxPanel, pass the @c wxBORDER_THEME style, or (apart from wxPanel) pass no border style.
- @subsubsection page_port_wxmsw_themedborders_details More detail on border implementation
+In general, specifying @c wxBORDER_THEME will cause a border of some kind to be used, chosen by the platform
+and control class. To leave the border decision entirely to wxWidgets, pass @c wxBORDER_DEFAULT.
+This is not to be confused with specifying @c wxBORDER_NONE, which says that there should
+definitely be @e no border.
- The way that wxMSW decides whether to apply a themed border is as follows.
- The theming code calls wxWindow::GetBorder() to obtain a border. If no border style has been
- passed to the window constructor, GetBorder() calls GetDefaultBorder() for this window.
- If wxBORDER_THEME was passed to the window constructor, GetBorder() calls GetDefaultBorderForControl().
+@subsubsection page_port_wxmsw_themedborders_details More detail on border implementation
- The implementation of wxWindow::GetDefaultBorder() on wxMSW calls wxWindow::CanApplyThemeBorder()
- which is a virtual function that tells wxWidgets whether a control can have a theme
- applied explicitly (some native controls already paint a theme in which case we should not
- apply it ourselves). Note that wxPanel is an exception to this rule because in many cases
- we wish to create a window with no border (for example, notebook pages). So wxPanel
- overrides GetDefaultBorder() in order to call the generic wxWindowBase::GetDefaultBorder(),
- returning wxBORDER_NONE.
+The way that wxMSW decides whether to apply a themed border is as follows.
+The theming code calls wxWindow::GetBorder() to obtain a border. If no border style has been
+passed to the window constructor, GetBorder() calls GetDefaultBorder() for this window.
+If wxBORDER_THEME was passed to the window constructor, GetBorder() calls GetDefaultBorderForControl().
- @subsection page_port_wxmsw_wince wxWinCE
+The implementation of wxWindow::GetDefaultBorder() on wxMSW calls wxWindow::CanApplyThemeBorder()
+which is a virtual function that tells wxWidgets whether a control can have a theme
+applied explicitly (some native controls already paint a theme in which case we should not
+apply it ourselves). Note that wxPanel is an exception to this rule because in many cases
+we wish to create a window with no border (for example, notebook pages). So wxPanel
+overrides GetDefaultBorder() in order to call the generic wxWindowBase::GetDefaultBorder(),
+returning wxBORDER_NONE.
- wxWinCE is the name given to wxMSW when compiled on Windows CE devices;
- most of wxMSW is common to Win32 and Windows CE but there are
- some simplifications, enhancements, and differences in
- behaviour.
+@subsection page_port_wxmsw_wince wxWinCE
- For building instructions, see docs/msw/wince in the
- distribution, also the section about Visual Studio 2005 project
- files below. The rest of this section documents issues you
- need to be aware of when programming for Windows CE devices.
+wxWinCE is the name given to wxMSW when compiled on Windows CE devices;
+most of wxMSW is common to Win32 and Windows CE but there are
+some simplifications, enhancements, and differences in
+behaviour.
- @subsubsection page_port_wxmsw_wince_ General issues for wxWinCE programming
+For building instructions, see docs/msw/wince in the
+distribution, also the section about Visual Studio 2005 project
+files below. The rest of this section documents issues you
+need to be aware of when programming for Windows CE devices.
- Mobile applications generally have fewer features and
- simpler user interfaces. Simply omit whole sizers, static
- lines and controls in your dialogs, and use comboboxes instead
- of listboxes where appropriate. You also need to reduce
- the amount of spacing used by sizers, for which you can
- use a macro such as this:
+@subsubsection page_port_wxmsw_wince_ General issues for wxWinCE programming
- @verbatim
- #if defined(__WXWINCE__)
- #define wxLARGESMALL(large,small) small
- #else
- #define wxLARGESMALL(large,small) large
- #endif
+Mobile applications generally have fewer features and
+simpler user interfaces. Simply omit whole sizers, static
+lines and controls in your dialogs, and use comboboxes instead
+of listboxes where appropriate. You also need to reduce
+the amount of spacing used by sizers, for which you can
+use a macro such as this:
- // Usage
- topsizer->Add( CreateTextSizer( message ), 0, wxALL, wxLARGESMALL(10,0) );
- @endverbatim
+@code
+#if defined(__WXWINCE__)
+ #define wxLARGESMALL(large,small) small
+#else
+ #define wxLARGESMALL(large,small) large
+#endif
- There is only ever one instance of a Windows CE application running,
- and wxWidgets will take care of showing the current instance and
- shutting down the second instance if necessary.
+// Usage
+topsizer->Add( CreateTextSizer( message ), 0, wxALL, wxLARGESMALL(10,0) );
+@endcode
- You can test the return value of wxSystemSettings::GetScreenType()
- for a qualitative assessment of what kind of display is available,
- or use wxGetDisplaySize() if you need more information.
+There is only ever one instance of a Windows CE application running,
+and wxWidgets will take care of showing the current instance and
+shutting down the second instance if necessary.
- You can also use wxGetOsVersion to test for a version of Windows CE at
- run-time (see the next section). However, because different builds
- are currently required to target different kinds of device, these
- values are hard-wired according to the build, and you cannot
- dynamically adapt the same executable for different major Windows CE
- platforms. This would require a different approach to the way
- wxWidgets adapts its behaviour (such as for menubars) to suit the
- style of device.
-
- See the "Life!" example (demos/life) for an example of
- an application that has been tailored for PocketPC and Smartphone use.
-
- @note don't forget to have this line in your .rc file, as for
- desktop Windows applications:
-
- @verbatim #include "wx/msw/wx.rc" @endverbatim
-
- @subsubsection page_port_wxmsw_wince_sdk Testing for WinCE SDKs
-
- Use these preprocessor symbols to test for the different types of device or SDK:
-
- @li @b __SMARTPHONE__ Generic mobile devices with phone buttons and a small display
- @li @b __PDA__ Generic mobile devices with no phone
- @li @b __HANDHELDPC__ Generic mobile device with a keyboard
- @li @b __WXWINCE__ Microsoft-powered Windows CE devices, whether PocketPC, Smartphone or Standard SDK
- @li @b WIN32_PLATFORM_WFSP Microsoft-powered smartphone
- @li @b __POCKETPC__ Microsoft-powered PocketPC devices with touch-screen
- @li @b __WINCE_STANDARDSDK__ Microsoft-powered Windows CE devices, for generic Windows CE applications
- @li @b __WINCE_NET__ Microsoft-powered Windows CE .NET devices (_WIN32_WCE is 400 or greater)
-
- wxGetOsVersion will return these values:
-
- @li @b wxWINDOWS_POCKETPC The application is running under PocketPC.
- @li @b wxWINDOWS_SMARTPHONE The application is running under Smartphone.
- @li @b wxWINDOWS_CE The application is running under Windows CE (built with the Standard SDK).
-
-
- @subsubsection page_port_wxmsw_wince_sizing Window sizing in wxWinCE
-
- Top level windows (dialogs, frames) are created always full-screen. Fit() of sizers will not rescale top
- level windows but instead will scale window content.
-
- If the screen orientation changes, the windows will automatically be resized
- so no further action needs to be taken (unless you want to change the layout
- according to the orientation, which you could detect in idle time, for example).
- When input panel (SIP) is shown, top level windows (frames and dialogs) resize
- accordingly (see wxTopLevelWindow::HandleSettingChange).
-
- @subsubsection page_port_wxmsw_wince_toplevel Closing top-level windows in wxWinCE
-
- You won't get a wxCloseEvent when the user clicks on the X in the titlebar
- on Smartphone and PocketPC; the window is simply hidden instead. However the system may send the
- event to force the application to close down.
-
- @subsubsection page_port_wxmsw_wince_hibernation Hibernation in wxWinCE
-
- Smartphone and PocketPC will send a wxEVT_HIBERNATE to the application object in low
- memory conditions. Your application should release memory and close dialogs,
- and wake up again when the next wxEVT_ACTIVATE or wxEVT_ACTIVATE_APP message is received.
- (wxEVT_ACTIVATE_APP is generated whenever a wxEVT_ACTIVATE event is received
- in Smartphone and PocketPC, since these platforms do not support WM_ACTIVATEAPP.)
-
- @subsubsection page_port_wxmsw_wince_hwbutt Hardware buttons in wxWinCE
-
- Special hardware buttons are sent to a window via the wxEVT_HOTKEY event
- under Smartphone and PocketPC. You should first register each required button with
- wxWindow::RegisterHotKey, and unregister the button when you're done with it. For example:
-
- @verbatim
- win->RegisterHotKey(0, wxMOD_WIN, WXK_SPECIAL1);
- win->UnregisterHotKey(0);
- @endverbatim
-
- You may have to register the buttons in a wxEVT_ACTIVATE event handler
- since other applications will grab the buttons.
-
- There is currently no method of finding out the names of the special
- buttons or how many there are.
+You can test the return value of wxSystemSettings::GetScreenType()
+for a qualitative assessment of what kind of display is available,
+or use wxGetDisplaySize() if you need more information.
- @subsubsection page_port_wxmsw_wince_dialogs Dialogs in wxWinCE
+You can also use wxGetOsVersion to test for a version of Windows CE at
+run-time (see the next section). However, because different builds
+are currently required to target different kinds of device, these
+values are hard-wired according to the build, and you cannot
+dynamically adapt the same executable for different major Windows CE
+platforms. This would require a different approach to the way
+wxWidgets adapts its behaviour (such as for menubars) to suit the
+style of device.
+
+See the "Life!" example (demos/life) for an example of
+an application that has been tailored for PocketPC and Smartphone use.
+
+@note don't forget to have this line in your .rc file, as for
+ desktop Windows applications:
+
+@verbatim #include "wx/msw/wx.rc" @endverbatim
+
+@subsubsection page_port_wxmsw_wince_sdk Testing for WinCE SDKs
+
+Use these preprocessor symbols to test for the different types of device or SDK:
+
+@li @b __SMARTPHONE__ Generic mobile devices with phone buttons and a small display
+@li @b __PDA__ Generic mobile devices with no phone
+@li @b __HANDHELDPC__ Generic mobile device with a keyboard
+@li @b __WXWINCE__ Microsoft-powered Windows CE devices, whether PocketPC, Smartphone or Standard SDK
+@li @b WIN32_PLATFORM_WFSP Microsoft-powered smartphone
+@li @b __POCKETPC__ Microsoft-powered PocketPC devices with touch-screen
+@li @b __WINCE_STANDARDSDK__ Microsoft-powered Windows CE devices, for generic Windows CE applications
+@li @b __WINCE_NET__ Microsoft-powered Windows CE .NET devices (_WIN32_WCE is 400 or greater)
+
+wxGetOsVersion will return these values:
+
+@li @b wxWINDOWS_POCKETPC The application is running under PocketPC.
+@li @b wxWINDOWS_SMARTPHONE The application is running under Smartphone.
+@li @b wxWINDOWS_CE The application is running under Windows CE (built with the Standard SDK).
+
+
+@subsubsection page_port_wxmsw_wince_sizing Window sizing in wxWinCE
+
+Top level windows (dialogs, frames) are created always full-screen. Fit() of sizers will not rescale top
+level windows but instead will scale window content.
+
+If the screen orientation changes, the windows will automatically be resized
+so no further action needs to be taken (unless you want to change the layout
+according to the orientation, which you could detect in idle time, for example).
+When input panel (SIP) is shown, top level windows (frames and dialogs) resize
+accordingly (see wxTopLevelWindow::HandleSettingChange()).
+
+@subsubsection page_port_wxmsw_wince_toplevel Closing top-level windows in wxWinCE
+
+You won't get a wxCloseEvent when the user clicks on the X in the titlebar
+on Smartphone and PocketPC; the window is simply hidden instead. However the system may send the
+event to force the application to close down.
+
+@subsubsection page_port_wxmsw_wince_hibernation Hibernation in wxWinCE
+
+Smartphone and PocketPC will send a @c wxEVT_HIBERNATE to the application object in low
+memory conditions. Your application should release memory and close dialogs,
+and wake up again when the next @c wxEVT_ACTIVATE or @c wxEVT_ACTIVATE_APP message is received.
+(@c wxEVT_ACTIVATE_APP is generated whenever a @c wxEVT_ACTIVATE event is received
+in Smartphone and PocketPC, since these platforms do not support @c WM_ACTIVATEAPP.)
+
+@subsubsection page_port_wxmsw_wince_hwbutt Hardware buttons in wxWinCE
+
+Special hardware buttons are sent to a window via the @c wxEVT_HOTKEY event
+under Smartphone and PocketPC. You should first register each required button with
+wxWindow::RegisterHotKey(), and unregister the button when you're done with it. For example:
+
+@code
+win->RegisterHotKey(0, wxMOD_WIN, WXK_SPECIAL1);
+win->UnregisterHotKey(0);
+@endcode
+
+You may have to register the buttons in a @c wxEVT_ACTIVATE event handler
+since other applications will grab the buttons.
+
+There is currently no method of finding out the names of the special
+buttons or how many there are.
- PocketPC dialogs have an OK button on the caption, and so you should generally
- not repeat an OK button on the dialog. You can add a Cancel button if necessary, but some dialogs
- simply don't offer you the choice (the guidelines recommend you offer an Undo facility
- to make up for it). When the user clicks on the OK button, your dialog will receive
- a wxID_OK event by default. If you wish to change this, call wxDialog::SetAffirmativeId
- with the required identifier to be used. Or, override wxDialog::DoOK (return @false to
- have wxWidgets simply call Close to dismiss the dialog).
+@subsubsection page_port_wxmsw_wince_dialogs Dialogs in wxWinCE
- Smartphone dialogs do @e not have an OK button on the caption, and are closed
- using one of the two menu buttons. You need to assign these using wxTopLevelWindow::SetLeftMenu
- and wxTopLevelWindow::SetRightMenu, for example:
+PocketPC dialogs have an OK button on the caption, and so you should generally
+not repeat an OK button on the dialog. You can add a Cancel button if necessary, but some dialogs
+simply don't offer you the choice (the guidelines recommend you offer an Undo facility
+to make up for it). When the user clicks on the OK button, your dialog will receive
+a @c wxID_OK event by default. If you wish to change this, call wxDialog::SetAffirmativeId()
+with the required identifier to be used. Or, override wxDialog::DoOK() (return @false to
+have wxWidgets simply call Close to dismiss the dialog).
- @verbatim
- #ifdef __SMARTPHONE__
- SetLeftMenu(wxID_OK);
- SetRightMenu(wxID_CANCEL, _("Cancel"));
- #elif defined(__POCKETPC__)
- // No OK/Cancel buttons on PocketPC, OK on caption will close
- #else
- topsizer->Add( CreateButtonSizer( wxOK|wxCANCEL ), 0, wxEXPAND | wxALL, 10 );
- #endif
- @endverbatim
+Smartphone dialogs do @e not have an OK button on the caption, and are closed
+using one of the two menu buttons. You need to assign these using wxTopLevelWindow::SetLeftMenu
+and wxTopLevelWindow::SetRightMenu(), for example:
- For implementing property sheets (flat tabs), use a wxNotebook with wxNB_FLAT|wxNB_BOTTOM
- and have the notebook left, top and right sides overlap the dialog by about 3 pixels
- to eliminate spurious borders. You can do this by using a negative spacing in your
- sizer Add() call. The cross-platform property sheet dialog wxPropertySheetDialog is
- provided, to show settings in the correct style on PocketPC and on other platforms.
+@code
+#ifdef __SMARTPHONE__
+ SetLeftMenu(wxID_OK);
+ SetRightMenu(wxID_CANCEL, _("Cancel"));
+#elif defined(__POCKETPC__)
+ // No OK/Cancel buttons on PocketPC, OK on caption will close
+#else
+ topsizer->Add( CreateButtonSizer( wxOK|wxCANCEL ), 0, wxEXPAND | wxALL, 10 );
+#endif
+@endcode
- Notifications (bubble HTML text with optional buttons and links) will also be
- implemented in the future for PocketPC.
+For implementing property sheets (flat tabs), use a wxNotebook with @c wxNB_FLAT|wxNB_BOTTOM
+and have the notebook left, top and right sides overlap the dialog by about 3 pixels
+to eliminate spurious borders. You can do this by using a negative spacing in your
+sizer Add() call. The cross-platform property sheet dialog wxPropertySheetDialog is
+provided, to show settings in the correct style on PocketPC and on other platforms.
- Modeless dialogs probably don't make sense for PocketPC and Smartphone, since
- frames and dialogs are normally full-screen, and a modeless dialog is normally
- intended to co-exist with the main application frame.
+Notifications (bubble HTML text with optional buttons and links) will also be
+implemented in the future for PocketPC.
- @subsubsection page_port_wxmsw_wince_ppc Menubars and toolbars in PocketPC
+Modeless dialogs probably don't make sense for PocketPC and Smartphone, since
+frames and dialogs are normally full-screen, and a modeless dialog is normally
+intended to co-exist with the main application frame.
- On PocketPC, a frame must always have a menubar, even if it's empty.
- An empty menubar/toolbar is automatically provided for dialogs, to hide
- any existing menubar for the duration of the dialog.
-
- Menubars and toolbars are implemented using a combined control,
- but you can use essentially the usual wxWidgets API; wxWidgets will combine the menubar
- and toolbar. However, there are some restrictions:
-
- @li You must create the frame's primary toolbar with wxFrame::CreateToolBar,
- because this uses the special wxToolMenuBar class (derived from wxToolBar)
- to implement the combined toolbar and menubar. Otherwise, you can create and manage toolbars
- using the wxToolBar class as usual, for example to implement an optional
- formatting toolbar above the menubar as Pocket Word does. But don't assign
- a wxToolBar to a frame using SetToolBar - you should always use CreateToolBar
- for the main frame toolbar.
- @li Deleting and adding tools to wxToolMenuBar after Realize is called is not supported.
- @li For speed, colours are not remapped to the system colours as they are
- in wxMSW. Provide the tool bitmaps either with the correct system button background,
- or with transparency (for example, using XPMs).
- @li Adding controls to wxToolMenuBar is not supported. However, wxToolBar supports
- controls.
-
- Unlike in all other ports, a wxDialog has a wxToolBar, automatically created
- for you. You may either leave it blank, or access it with wxDialog::GetToolBar
- and add buttons, then calling wxToolBar::Realize. You cannot set or recreate
- the toolbar.
-
- @subsubsection page_port_wxmsw_wince_smart Menubars and toolbars in Smartphone
-
- On Smartphone, there are only two menu buttons, so a menubar is simulated
- using a nested menu on the right menu button. Any toolbars are simply ignored on
- Smartphone.
-
- @subsubsection page_port_wxmsw_wince_closing Closing windows in wxWinCE
-
- The guidelines state that applications should not have a Quit menu item,
- since the user should not have to know whether an application is in memory
- or not. The close button on a window does not call the window's
- close handler; it simply hides the window. However, the guidelines say that
- the Ctrl+Q accelerator can be used to quit the application, so wxWidgets
- defines this accelerator by default and if your application handles
- wxID_EXIT, it will do the right thing.
-
- @subsubsection page_port_wxmsw_wince_ctx Context menus in wxWinCE
-
- To enable context menus in PocketPC, you currently need to call wxWindow::EnableContextMenu,
- a wxWinCE-only function. Otherwise the context menu event (wxContextMenuEvent) will
- never be sent. This API is subject to change.
-
- Context menus are not supported in Smartphone.
-
- @subsubsection page_port_wxmsw_wince_ctrl Control differences on wxWinCE
-
- These controls and styles are specific to wxWinCE:
-
- @li wxTextCtrl The wxTE_CAPITALIZE style causes a CAPEDIT control to
- be created, which capitalizes the first letter.
-
- These controls are missing from wxWinCE:
-
- @li MDI classes MDI is not supported under Windows CE.
- @li wxMiniFrame Not supported under Windows CE.
-
- Tooltips are not currently supported for controls, since on PocketPC controls with
- tooltips are distinct controls, and it will be hard to add dynamic
- tooltip support.
-
- Control borders on PocketPC and Smartphone should normally be specified with
- wxBORDER_SIMPLE instead of wxBORDER_SUNKEN. Controls will usually adapt
- appropriately by virtue of their GetDefaultBorder() function, but if you
- wish to specify a style explicitly you can use wxDEFAULT_CONTROL_BORDER
- which will give a simple border on PocketPC and Smartphone, and the sunken border on
- other platforms.
-
- @subsubsection page_port_wxmsw_wince_help Online help in wxWinCE
-
- You can use the help controller wxWinceHelpController which controls
- simple @c .htm files, usually installed in the Windows directory.
- See the Windows CE reference for how to format the HTML files.
-
- @subsubsection page_port_wxmsw_wince_install Installing your PocketPC and Smartphone applications
-
- To install your application, you need to build a CAB file using
- the parameters defined in a special .inf file. The CabWiz program
- in your SDK will compile the CAB file from the .inf file and
- files that it specifies.
-
- For delivery, you can simply ask the user to copy the CAB file to the
- device and execute the CAB file using File Explorer. Or, you can
- write a program for the desktop PC that will find the ActiveSync
- Application Manager and install the CAB file on the device,
- which is obviously much easier for the user.
-
- Here are some links that may help.
-
- @li A setup builder that takes CABs and builds a setup program is at
- http://www.eskimo.com/~scottlu/win/index.html.
- @li Sample installation files can be found in
- <tt>Windows CE Tools/wce420/POCKET PC 2003/Samples/Win32/AppInst</tt>.
- @li An installer generator using wxPython can be found at
- http://ppcquicksoft.iespana.es/ppcquicksoft/myinstall.html.
- @li Miscellaneous Windows CE resources can be found at
- http://www.orbworks.com/pcce/resources.html.
- @li Installer creation instructions with a setup.exe for installing to PPC can be found at
- http://www.pocketpcdn.com/articles/creatingsetup.html.
- @li Microsoft instructions are at
- http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnce30/html/appinstall30.asp?frame=true
- @li Troubleshooting WinCE application installations:
- http://support.microsoft.com/default.aspx?scid=KB;en-us;q181007
-
- You may also check out <tt>demos/life/setup/wince</tt> which contains
- scripts to create a PocketPC installation for ARM-based
- devices. In particular, @c build.bat builds the distribution and
- copies it to a directory called @c Deliver.
-
- @subsubsection page_port_wxmsw_wince_filedlg wxFileDialog in PocketPC
-
- Allowing the user to access files on memory cards, or on arbitrary
- parts of the filesystem, is a pain; the standard file dialog only
- shows folders under My Documents or folders on memory cards
- (not the system or card root directory, for example). This is
- a known problem for PocketPC developers.
-
- If you need a file dialog that allows access to all folders,
- you can use wxGenericFileDialog instead. You will need to include
- @c wx/generic/filedlgg.h.
-
- @subsubsection page_port_wxmsw_wince_evc Embedded Visual C++ Issues
-
- <b>Run-time type information</b>
-
- If you wish to use runtime type information (RTTI) with eVC++ 4, you need to download
- an extra library, @c ccrtrtti.lib, and link with it. At the time of
- writing you can get it from here:
-
- @verbatim
- http://support.microsoft.com/kb/830482/en-us
- @endverbatim
-
- Otherwise you will get linker errors similar to this:
-
- @verbatim
- wxwince26d.lib(control.obj) : error LNK2001: unresolved external symbol "const type_info::`vftable'" (??_7type_info@@6B@)
- @endverbatim
-
- <b>Windows Mobile 5.0 emulator</b>
-
- Note that there is no separate emulator configuration for Windows Mobile 5.0: the
- emulator runs the ARM code directly.
-
- <b>Visual Studio 2005 project files</b>
-
- Unfortunately, Visual Studio 2005, required to build Windows Mobile 5.0 applications,
- doesn't do a perfect job of converting the project files from eVC++ format.
-
- When you have converted the wxWidgets workspace, edit the configuration properties
- for each configuration and in the Librarian, add a relative path ..\\..\\lib to
- each library path. For example:
- <tt>..\\$(PlatformName)\\$(ConfigurationName)\\wx_mono.lib</tt>.
-
- Then, for a sample you want to compile, edit the configuration properties
- and make sure
- <tt>..\\..\\lib\\$(PlatformName)\\$(ConfigurationName)</tt>
- is in the Linker/General/Additional Library Directories property.
- Also change the Linker/Input/Additional Dependencies property to something like
- <tt>coredll.lib wx_mono.lib wx_wxjpeg.lib wx_wxpng.lib wx_wxzlib.lib wx_wxexpat.lib
- commctrl.lib winsock.lib wininet.lib</tt>
- (since the library names in the wxWidgets workspace were changed by VS 2005).
-
- Alternately, you could could edit all the names to be identical to the original eVC++
- names, but this will probably be more fiddly.
-
- @subsubsection page_port_wxmsw_wince_issues Remaining issues
-
- These are some of the remaining problems to be sorted out, and features
- to be supported.
-
- @li <b>Windows Mobile 5 issues.</b> It is not possible to get the HMENU for
- the command bar on Mobile 5, so the menubar functions need to be rewritten
- to get the individual menus without use of a menubar handle. Also the
- new Mobile 5 convention of using only two menus (and no bitmap buttons) needs to be
- considered.
- @li <b>Sizer speed.</b> Particularly for dialogs containing notebooks,
- layout seems slow. Some analysis is required.
- @li <b>Notification boxes.</b> The balloon-like notification messages, and their
- icons, should be implemented. This will be quite straightforward.
- @li <b>SIP size.</b> We need to be able to get the area taken up by the SIP (input panel),
- and the remaining area, by calling SHSipInfo. We also may need to be able to show and hide
- the SIP programmatically, with SHSipPreference. See also the <em>Input Dialogs</em> topic in
- the <em>Programming Windows CE</em> guide for more on this, and how to have dialogs
- show the SIP automatically using the WC_SIPREF control.
- @li <b>wxStaticBitmap.</b> The About box in the "Life!" demo shows a bitmap that is
- the correct size on the emulator, but too small on a VGA Pocket Loox device.
- @li <b>wxStaticLine.</b> Lines don't show up, and the documentation suggests that
- missing styles are implemented with WM_PAINT.
- @li <b>HTML control.</b> PocketPC has its own HTML control which can be used for showing
- local pages or navigating the web. We should create a version of wxHtmlWindow that uses this
- control, or have a separately-named control (wxHtmlCtrl), with a syntax as close as possible
- to wxHtmlWindow.
- @li <b>Tooltip control.</b> PocketPC uses special TTBUTTON and TTSTATIC controls for adding
- tooltips, with the tooltip separated from the label with a double tilde. We need to support
- this using SetToolTip.(Unfortunately it does not seem possible to dynamically remove the tooltip,
- so an extra style may be required.)
- @li <b>Focus.</b> In the wxPropertySheetDialog demo on Smartphone, it's not possible to navigate
- between controls. The focus handling in wxWidgets needs investigation. See in particular
- src/common/containr.cpp, and note that the default OnActivate handler in src/msw/toplevel.cpp
- sets the focus to the first child of the dialog.
- @li <b>OK button.</b> We should allow the OK button on a dialog to be optional, perhaps
- by using wxCLOSE_BOX to indicate when the OK button should be displayed.
- @li <b>Dynamic adaptation.</b> We should probably be using run-time tests more
- than preprocessor tests, so that the same WinCE application can run on different
- versions of the operating system.
- @li <b>Modeless dialogs.</b> When a modeless dialog is hidden with the OK button, it doesn't restore the
- frame's menubar. See for example the find dialog in the dialogs sample. However, the menubar is restored
- if pressing Cancel (the window is closed). This reflects the fact that modeless dialogs are
- not very useful on Windows CE; however, we could perhaps destroy/restore a modeless dialog's menubar
- on deactivation and activation.
- @li <b>Home screen plugins.</b> Figure out how to make home screen plugins for use with wxWidgets
- applications (see http://www.codeproject.com/ce/CTodayWindow.asp for inspiration).
- Although we can't use wxWidgets to create the plugin (too large), we could perhaps write
- a generic plugin that takes registry information from a given application, with
- options to display information in a particular way using icons and text from
- a specified location.
- @li <b>Further abstraction.</b> We should be able to abstract away more of the differences
- between desktop and mobile applications, in particular for sizer layout.
- @li <b>Dialog captions.</b> The blue, bold captions on dialogs - with optional help button -
- should be catered for, either by hard-wiring the capability into all dialogs and panels,
- or by providing a standard component and sizer.
-
-
- @section page_port_nativedocs Documentation for the native toolkits
-
- It's sometimes useful to interface directly with the underlying toolkit
- used by wxWidgets to e.g. use toolkit-specific features.
- In such case (or when you want to e.g. write a port-specific patch) it can be
- necessary to use the underlying toolkit API directly:
-
- @li wxMSW port uses win32 API: see MSDN docs at http://msdn2.microsoft.com/en-us/library/ms649779.aspx
- @li wxGTK port uses GTK+: see GTK+ 2.x docs at http://developer.gnome.org/doc/API/2.0/gtk/index.html
+@subsubsection page_port_wxmsw_wince_ppc Menubars and toolbars in PocketPC
+
+On PocketPC, a frame must always have a menubar, even if it's empty.
+An empty menubar/toolbar is automatically provided for dialogs, to hide
+any existing menubar for the duration of the dialog.
+
+Menubars and toolbars are implemented using a combined control,
+but you can use essentially the usual wxWidgets API; wxWidgets will combine the menubar
+and toolbar. However, there are some restrictions:
+
+@li You must create the frame's primary toolbar with wxFrame::CreateToolBar(),
+because this uses the special wxToolMenuBar class (derived from wxToolBar)
+to implement the combined toolbar and menubar. Otherwise, you can create and manage toolbars
+using the wxToolBar class as usual, for example to implement an optional
+formatting toolbar above the menubar as Pocket Word does. But don't assign
+a wxToolBar to a frame using SetToolBar - you should always use CreateToolBar
+for the main frame toolbar.
+@li Deleting and adding tools to wxToolMenuBar after Realize is called is not supported.
+@li For speed, colours are not remapped to the system colours as they are
+in wxMSW. Provide the tool bitmaps either with the correct system button background,
+or with transparency (for example, using XPMs).
+@li Adding controls to wxToolMenuBar is not supported. However, wxToolBar supports
+controls.
+
+Unlike in all other ports, a wxDialog has a wxToolBar, automatically created
+for you. You may either leave it blank, or access it with wxDialog::GetToolBar()
+and add buttons, then calling wxToolBar::Realize(). You cannot set or recreate
+the toolbar.
+
+@subsubsection page_port_wxmsw_wince_smart Menubars and toolbars in Smartphone
+
+On Smartphone, there are only two menu buttons, so a menubar is simulated
+using a nested menu on the right menu button. Any toolbars are simply ignored on
+Smartphone.
+
+@subsubsection page_port_wxmsw_wince_closing Closing windows in wxWinCE
+
+The guidelines state that applications should not have a Quit menu item,
+since the user should not have to know whether an application is in memory
+or not. The close button on a window does not call the window's
+close handler; it simply hides the window. However, the guidelines say that
+the Ctrl+Q accelerator can be used to quit the application, so wxWidgets
+defines this accelerator by default and if your application handles
+wxID_EXIT, it will do the right thing.
+
+@subsubsection page_port_wxmsw_wince_ctx Context menus in wxWinCE
+
+To enable context menus in PocketPC, you currently need to call wxWindow::EnableContextMenu(),
+a wxWinCE-only function. Otherwise the context menu event (wxContextMenuEvent) will
+never be sent. This API is subject to change.
+
+Context menus are not supported in Smartphone.
+
+@subsubsection page_port_wxmsw_wince_ctrl Control differences on wxWinCE
+
+These controls and styles are specific to wxWinCE:
+
+@li wxTextCtrl The @c wxTE_CAPITALIZE style causes a CAPEDIT control to
+be created, which capitalizes the first letter.
+
+These controls are missing from wxWinCE:
+
+@li MDI classes MDI is not supported under Windows CE.
+@li wxMiniFrame Not supported under Windows CE.
+
+Tooltips are not currently supported for controls, since on PocketPC controls with
+tooltips are distinct controls, and it will be hard to add dynamic
+tooltip support.
+
+Control borders on PocketPC and Smartphone should normally be specified with
+@c wxBORDER_SIMPLE instead of @c wxBORDER_SUNKEN. Controls will usually adapt
+appropriately by virtue of their GetDefaultBorder() function, but if you
+wish to specify a style explicitly you can use @c wxDEFAULT_CONTROL_BORDER
+which will give a simple border on PocketPC and Smartphone, and the sunken border on
+other platforms.
+
+@subsubsection page_port_wxmsw_wince_help Online help in wxWinCE
+
+You can use the help controller wxWinceHelpController which controls
+simple @c .htm files, usually installed in the Windows directory.
+See the Windows CE reference for how to format the HTML files.
+
+@subsubsection page_port_wxmsw_wince_install Installing your PocketPC and Smartphone applications
+
+To install your application, you need to build a CAB file using
+the parameters defined in a special .inf file. The CabWiz program
+in your SDK will compile the CAB file from the .inf file and
+files that it specifies.
+
+For delivery, you can simply ask the user to copy the CAB file to the
+device and execute the CAB file using File Explorer. Or, you can
+write a program for the desktop PC that will find the ActiveSync
+Application Manager and install the CAB file on the device,
+which is obviously much easier for the user.
+
+Here are some links that may help.
+
+@li A setup builder that takes CABs and builds a setup program is at
+ http://www.eskimo.com/~scottlu/win/index.html.
+@li Sample installation files can be found in
+ <tt>Windows CE Tools/wce420/POCKET PC 2003/Samples/Win32/AppInst</tt>.
+@li An installer generator using wxPython can be found at
+ http://ppcquicksoft.iespana.es/ppcquicksoft/myinstall.html.
+@li Miscellaneous Windows CE resources can be found at
+ http://www.orbworks.com/pcce/resources.html.
+@li Installer creation instructions with a setup.exe for installing to PPC can be found at
+ http://www.pocketpcdn.com/articles/creatingsetup.html.
+@li Microsoft instructions are at
+ http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnce30/html/appinstall30.asp?frame=true
+@li Troubleshooting WinCE application installations:
+ http://support.microsoft.com/default.aspx?scid=KB;en-us;q181007
+
+You may also check out <tt>demos/life/setup/wince</tt> which contains
+scripts to create a PocketPC installation for ARM-based
+devices. In particular, @c build.bat builds the distribution and
+copies it to a directory called @c Deliver.
+
+@subsubsection page_port_wxmsw_wince_filedlg wxFileDialog in PocketPC
+
+Allowing the user to access files on memory cards, or on arbitrary
+parts of the filesystem, is a pain; the standard file dialog only
+shows folders under My Documents or folders on memory cards
+(not the system or card root directory, for example). This is
+a known problem for PocketPC developers.
+
+If you need a file dialog that allows access to all folders,
+you can use wxGenericFileDialog instead. You will need to include
+@c wx/generic/filedlgg.h.
+
+@subsubsection page_port_wxmsw_wince_evc Embedded Visual C++ Issues
+
+<b>Run-time type information</b>
+
+If you wish to use runtime type information (RTTI) with eVC++ 4, you need to download
+an extra library, @c ccrtrtti.lib, and link with it. At the time of
+writing you can get it from here:
+
+@verbatim
+http://support.microsoft.com/kb/830482/en-us
+@endverbatim
+
+Otherwise you will get linker errors similar to this:
+
+@verbatim
+wxwince26d.lib(control.obj) : error LNK2001: unresolved external symbol "const type_info::`vftable'" (??_7type_info@@6B@)
+@endverbatim
+
+<b>Windows Mobile 5.0 emulator</b>
+
+Note that there is no separate emulator configuration for Windows Mobile 5.0: the
+emulator runs the ARM code directly.
+
+<b>Visual Studio 2005 project files</b>
+
+Unfortunately, Visual Studio 2005, required to build Windows Mobile 5.0 applications,
+doesn't do a perfect job of converting the project files from eVC++ format.
+
+When you have converted the wxWidgets workspace, edit the configuration properties
+for each configuration and in the Librarian, add a relative path ..\\..\\lib to
+each library path. For example:
+<tt>..\\$(PlatformName)\\$(ConfigurationName)\\wx_mono.lib</tt>.
+
+Then, for a sample you want to compile, edit the configuration properties
+and make sure
+<tt>..\\..\\lib\\$(PlatformName)\\$(ConfigurationName)</tt>
+is in the Linker/General/Additional Library Directories property.
+Also change the Linker/Input/Additional Dependencies property to something like
+<tt>coredll.lib wx_mono.lib wx_wxjpeg.lib wx_wxpng.lib wx_wxzlib.lib wx_wxexpat.lib
+ commctrl.lib winsock.lib wininet.lib</tt>
+(since the library names in the wxWidgets workspace were changed by VS 2005).
+
+Alternately, you could could edit all the names to be identical to the original eVC++
+names, but this will probably be more fiddly.
+
+@subsubsection page_port_wxmsw_wince_issues Remaining issues
+
+These are some of the remaining problems to be sorted out, and features
+to be supported.
+
+@li <b>Windows Mobile 5 issues.</b> It is not possible to get the HMENU for
+the command bar on Mobile 5, so the menubar functions need to be rewritten
+to get the individual menus without use of a menubar handle. Also the
+new Mobile 5 convention of using only two menus (and no bitmap buttons) needs to be
+considered.
+@li <b>Sizer speed.</b> Particularly for dialogs containing notebooks,
+layout seems slow. Some analysis is required.
+@li <b>Notification boxes.</b> The balloon-like notification messages, and their
+icons, should be implemented. This will be quite straightforward.
+@li <b>SIP size.</b> We need to be able to get the area taken up by the SIP (input panel),
+and the remaining area, by calling SHSipInfo. We also may need to be able to show and hide
+the SIP programmatically, with SHSipPreference. See also the <em>Input Dialogs</em> topic in
+the <em>Programming Windows CE</em> guide for more on this, and how to have dialogs
+show the SIP automatically using the @c WC_SIPREF control.
+@li <b>wxStaticBitmap.</b> The About box in the "Life!" demo shows a bitmap that is
+the correct size on the emulator, but too small on a VGA Pocket Loox device.
+@li <b>wxStaticLine.</b> Lines don't show up, and the documentation suggests that
+missing styles are implemented with @c WM_PAINT.
+@li <b>HTML control.</b> PocketPC has its own HTML control which can be used for showing
+local pages or navigating the web. We should create a version of wxHtmlWindow that uses this
+control, or have a separately-named control (wxHtmlCtrl), with a syntax as close as possible
+to wxHtmlWindow.
+@li <b>Tooltip control.</b> PocketPC uses special TTBUTTON and TTSTATIC controls for adding
+tooltips, with the tooltip separated from the label with a double tilde. We need to support
+this using SetToolTip.(Unfortunately it does not seem possible to dynamically remove the tooltip,
+so an extra style may be required.)
+@li <b>Focus.</b> In the wxPropertySheetDialog demo on Smartphone, it's not possible to navigate
+between controls. The focus handling in wxWidgets needs investigation. See in particular
+src/common/containr.cpp, and note that the default OnActivate handler in src/msw/toplevel.cpp
+sets the focus to the first child of the dialog.
+@li <b>OK button.</b> We should allow the OK button on a dialog to be optional, perhaps
+by using @c wxCLOSE_BOX to indicate when the OK button should be displayed.
+@li <b>Dynamic adaptation.</b> We should probably be using run-time tests more
+than preprocessor tests, so that the same WinCE application can run on different
+versions of the operating system.
+@li <b>Modeless dialogs.</b> When a modeless dialog is hidden with the OK button, it doesn't restore the
+frame's menubar. See for example the find dialog in the dialogs sample. However, the menubar is restored
+if pressing Cancel (the window is closed). This reflects the fact that modeless dialogs are
+not very useful on Windows CE; however, we could perhaps destroy/restore a modeless dialog's menubar
+on deactivation and activation.
+@li <b>Home screen plugins.</b> Figure out how to make home screen plugins for use with wxWidgets
+applications (see http://www.codeproject.com/ce/CTodayWindow.asp for inspiration).
+Although we can't use wxWidgets to create the plugin (too large), we could perhaps write
+a generic plugin that takes registry information from a given application, with
+options to display information in a particular way using icons and text from
+a specified location.
+@li <b>Further abstraction.</b> We should be able to abstract away more of the differences
+between desktop and mobile applications, in particular for sizer layout.
+@li <b>Dialog captions.</b> The blue, bold captions on dialogs - with optional help button -
+should be catered for, either by hard-wiring the capability into all dialogs and panels,
+or by providing a standard component and sizer.
+
+
+@section page_port_nativedocs Documentation for the native toolkits
+
+It's sometimes useful to interface directly with the underlying toolkit
+used by wxWidgets to e.g. use toolkit-specific features.
+In such case (or when you want to e.g. write a port-specific patch) it can be
+necessary to use the underlying toolkit API directly:
+
+@li wxMSW port uses win32 API: see MSDN docs at http://msdn2.microsoft.com/en-us/library/ms649779.aspx
+@li wxGTK port uses GTK+: see GTK+ 2.x docs at http://developer.gnome.org/doc/API/2.0/gtk/index.html
+@li wxMac port uses the Carbon API: see Carbon docs at http://developer.apple.com/carbon
+@li wxCocoa port uses the Cocoa API: see Cocoa docs at http://developer.apple.com/carbon
*/
projects / wxWidgets.git / blobdiff