-void GSocket_destroy(GSocket *socket);
-
-
-
-/* GSocket_Shutdown:
- * Disallow further read/write operations on this socket, close
- * the fd and disable all callbacks.
- */
-void GSocket_Shutdown(GSocket *socket);
-
-/* Address handling */
-
-/* GSocket_SetLocal:
- * GSocket_GetLocal:
- * GSocket_SetPeer:
- * GSocket_GetPeer:
- * Set or get the local or peer address for this socket. The 'set'
- * functions return GSOCK_NOERROR on success, an error code otherwise.
- * The 'get' functions return a pointer to a GAddress object on success,
- * or NULL otherwise, in which case they set the error code of the
- * corresponding GSocket.
- *
- * Error codes:
- * GSOCK_INVSOCK - the socket is not valid.
- * GSOCK_INVADDR - the address is not valid.
- */
-GSocketError GSocket_SetLocal(GSocket *socket, GAddress *address);
-GSocketError GSocket_SetPeer(GSocket *socket, GAddress *address);
-GAddress *GSocket_GetLocal(GSocket *socket);
-GAddress *GSocket_GetPeer(GSocket *socket);
-
-/* Server specific parts */
-
-/* GSocket_SetServer:
- * Sets up this socket as a server. The local address must have been
- * set with GSocket_SetLocal() before GSocket_SetServer() is called.
- * Returns GSOCK_NOERROR on success, one of the following otherwise:
- *
- * Error codes:
- * GSOCK_INVSOCK - the socket is in use.
- * GSOCK_INVADDR - the local address has not been set.
- * GSOCK_IOERR - low-level error.
- */
-GSocketError GSocket_SetServer(GSocket *socket);
-
-/* GSocket_WaitConnection:
- * Waits for an incoming client connection. Returns a pointer to
- * a GSocket object, or NULL if there was an error, in which case
- * the last error field will be updated for the calling GSocket.
- *
- * Error codes (set in the calling GSocket)
- * GSOCK_INVSOCK - the socket is not valid or not a server.
- * GSOCK_TIMEDOUT - timeout, no incoming connections.
- * GSOCK_WOULDBLOCK - the call would block and the socket is nonblocking.
- * GSOCK_MEMERR - couldn't allocate memory.
- * GSOCK_IOERR - low-level error.
- */
-GSocket *GSocket_WaitConnection(GSocket *socket);
-
-
-/* Client specific parts */
-
-/* GSocket_Connect:
- * For stream (connection oriented) sockets, GSocket_Connect() tries
- * to establish a client connection to a server using the peer address
- * as established with GSocket_SetPeer(). Returns GSOCK_NOERROR if the
- * connection has been succesfully established, or one of the error
- * codes listed below. Note that for nonblocking sockets, a return
- * value of GSOCK_WOULDBLOCK doesn't mean a failure. The connection
- * request can be completed later; you should use GSocket_Select()
- * to poll for GSOCK_CONNECTION | GSOCK_LOST, or wait for the
- * corresponding asynchronous events.
- *
- * For datagram (non connection oriented) sockets, GSocket_Connect()
- * just sets the peer address established with GSocket_SetPeer() as
- * default destination.
- *
- * Error codes:
- * GSOCK_INVSOCK - the socket is in use or not valid.
- * GSOCK_INVADDR - the peer address has not been established.
- * GSOCK_TIMEDOUT - timeout, the connection failed.
- * GSOCK_WOULDBLOCK - connection in progress (nonblocking sockets only)
- * GSOCK_MEMERR - couldn't allocate memory.
- * GSOCK_IOERR - low-level error.
- */
-GSocketError GSocket_Connect(GSocket *socket, GSocketStream stream);
-
-
-/* Datagram sockets */
-
-/* GSocket_SetNonOriented:
- * Sets up this socket as a non-connection oriented (datagram) socket.
- * Before using this function, the local address must have been set
- * with GSocket_SetLocal(), or the call will fail. Returns GSOCK_NOERROR
- * on success, or one of the following otherwise.
- *
- * Error codes:
- * GSOCK_INVSOCK - the socket is in use.
- * GSOCK_INVADDR - the local address has not been set.
- * GSOCK_IOERR - low-level error.
- */
-GSocketError GSocket_SetNonOriented(GSocket *socket);
-
-
-/* Generic IO */
-
-/* Like recv(), send(), ... */
-
-/* For datagram sockets, the incoming / outgoing addresses
- * are stored as / read from the 'peer' address field.
- */
-int GSocket_Read(GSocket *socket, char *buffer, int size);
-int GSocket_Write(GSocket *socket, const char *buffer,
- int size);
-
-/* GSocket_Select:
- * Polls the socket to determine its status. This function will
- * check for the events specified in the 'flags' parameter, and
- * it will return a mask indicating which operations can be
- * performed. This function won't block, regardless of the
- * mode (blocking | nonblocking) of the socket.
- */
-GSocketEventFlags GSocket_Select(GSocket *socket, GSocketEventFlags flags);
-
-
-/* Attributes */
-
-/* GSocket_SetNonBlocking:
- * Sets the socket to non-blocking mode. All IO calls will return
- * immediately.
- */
-void GSocket_SetNonBlocking(GSocket *socket, int non_block);
-
-/* GSocket_SetTimeout:
- * Sets the timeout for blocking calls. Time is expressed in
- * milliseconds.
- */
-void GSocket_SetTimeout(GSocket *socket, unsigned long millisec);
-
-/* GSocket_GetError:
- * Returns the last error occured for this socket. Note that successful
- * operations do not clear this back to GSOCK_NOERROR, so use it only
- * after an error.
- */
-GSocketError WXDLLIMPEXP_NET GSocket_GetError(GSocket *socket);
-
-
-/* Callbacks */
-
-/* GSOCK_INPUT:
- * There is data to be read in the input buffer. If, after a read
- * operation, there is still data available, the callback function will
- * be called again.
- * GSOCK_OUTPUT:
- * The socket is available for writing. That is, the next write call
- * won't block. This event is generated only once, when the connection is
- * first established, and then only if a call failed with GSOCK_WOULDBLOCK,
- * when the output buffer empties again. This means that the app should
- * assume that it can write since the first OUTPUT event, and no more
- * OUTPUT events will be generated unless an error occurs.
- * GSOCK_CONNECTION:
- * Connection succesfully established, for client sockets, or incoming
- * client connection, for server sockets. Wait for this event (also watch
- * out for GSOCK_LOST) after you issue a nonblocking GSocket_Connect() call.
- * GSOCK_LOST:
- * The connection is lost (or a connection request failed); this could
- * be due to a failure, or due to the peer closing it gracefully.
- */
-
-/* GSocket_SetCallback:
- * Enables the callbacks specified by 'flags'. Note that 'flags'
- * may be a combination of flags OR'ed toghether, so the same
- * callback function can be made to accept different events.
- * The callback function must have the following prototype:
- *
- * void function(GSocket *socket, GSocketEvent event, char *cdata)
- */
-void GSocket_SetCallback(GSocket *socket, GSocketEventFlags flags,
- GSocketCallback fallback, char *cdata);
-
-/* GSocket_UnsetCallback:
- * Disables all callbacks specified by 'flags', which may be a
- * combination of flags OR'ed toghether.
- */
-void GSocket_UnsetCallback(GSocket *socket, GSocketEventFlags flags);
projects / wxWidgets.git / blobdiff