Added command to set wxPG_PROP_READONLY in the propgrid sample

[wxWidgets.git] / interface / wx / string.h

diff --git a/interface/wx/string.h b/interface/wx/string.h
index aa7e3d3266b670a93571eca420928bacc32e93e0..65437943bd5e18368b786cb14b4f0772d8cffc01 100644 (file)
--- a/interface/wx/string.h
+++ b/interface/wx/string.h
@@ -36,208 +36,28 @@
     for important warnings and advices for using it, please read
     the @ref overview_string.
 
     for important warnings and advices for using it, please read
     the @ref overview_string.
 

-    In wxWidgets 3.0 wxString always stores Unicode strings, so you should
+    Since wxWidgets 3.0 wxString always stores Unicode strings, so you should

     be sure to read also @ref overview_unicode.
 
 
     be sure to read also @ref overview_unicode.
 
 

-    @section string_construct Constructors and assignment operators
+    @section string_index Index of the member groups

 
 

-    A string may be constructed either from a C string, (some number of copies of)
-    a single character or a wide (Unicode) string. For all constructors (except the
-    default which creates an empty string) there is also a corresponding assignment
-    operator.
-
-    @li wxString()
-    @li operator=()
-    @li ~wxString()
-    @li assign()
-
-
-    @section string_len String length
-
-    These functions return the string length and check whether the string
-    is empty or they empty it.
-
-    @li length()
-    @li size()
-    @li Len()
-    @li IsEmpty()
-    @li operator!()
-    @li Empty()
-    @li Clear()
-
-
-    @section string_access Character access
-
-    Many functions below take a character index in the string. As with C
-    strings and arrays, the indices start from 0, so the first character of a
-    string is string[0]. An attempt to access a character beyond the end of the
-    string (which may even be 0 if the string is empty) will provoke an assert
-    failure in @ref overview_debugging "debug builds", but no checks are
-    done in release builds.
-
-    This section also contains both implicit and explicit conversions to C style
-    strings. Although implicit conversion is quite convenient, you are advised
-    to use wc_str() for the sake of clarity.
-
-    @li GetChar()
-    @li GetWritableChar()
-    @li SetChar()
-    @li Last()
-    @li operator[]()
-    @li wc_str()
-    @li utf8_str()
-    @li c_str()
-    @li wx_str()
-    @li mb_str()
-    @li fn_str()
-
-
-    @section string_concat Concatenation
-
-    Anything may be concatenated (appended to) with a string. However, you can't
-    append something to a C string (including literal constants), so to do this it
-    should be converted to a wxString first.
-
-    @li insert()
-    @li append()
-    @li operator<<()
-    @li operator+=()
-    @li operator+()
-    @li Append()
-    @li Prepend()
-
-
-    @section string_comp Comparison
-
-    The default comparison function Cmp() is case-sensitive and so is the default
-    version of IsSameAs(). For case insensitive comparisons you should use CmpNoCase()
-    or give a second parameter to IsSameAs(). This last function is maybe more
-    convenient if only equality of the strings matters because it returns a boolean
-    @true value if the strings are the same and not 0 (which is usually @false
-    in C) as Cmp() does.
-
-    Matches() is a poor man's regular expression matcher: it only understands
-    '*' and '?' metacharacters in the sense of DOS command line interpreter.
-
-    StartsWith() is helpful when parsing a line of text which should start
-    with some predefined prefix and is more efficient than doing direct string
-    comparison as you would also have to precalculate the length of the prefix.
-
-    @li compare()
-    @li Cmp()
-    @li CmpNoCase()
-    @li IsSameAs()
-    @li Matches()
-    @li StartsWith()
-    @li EndsWith()
-
-
-    @section string_substring Substring extraction
-
-    These functions allow you to extract a substring from the string. The
-    original string is not modified and the function returns the extracted
-    substring.
-
-    @li at()
-    @li substr()
-    @li Mid()
-    @li operator()()
-    @li Left()
-    @li Right()
-    @li BeforeFirst()
-    @li BeforeLast()
-    @li AfterFirst()
-    @li AfterLast()
-    @li StartsWith()
-    @li EndsWith()
-
-
-    @section string_case Case conversion
-
-    The MakeXXX() variants modify the string in place, while the other functions
-    return a new string which contains the original text converted to the upper or
-    lower case and leave the original string unchanged.
-
-    @li MakeUpper()
-    @li Upper()
-    @li MakeLower()
-    @li Lower()
-    @li MakeCapitalized()
-    @li Capitalize()
-
-
-    @section string_search Searching and replacing
-
-    These functions replace the standard @e strchr() and @e strstr()
-    functions.
-
-    @li find()
-    @li rfind()
-    @li replace()
-    @li Find()
-    @li Replace()
-
-
-    @section string_conv Conversion to numbers
-
-    The string provides functions for conversion to signed and unsigned integer and
-    floating point numbers. All functions take a pointer to the variable to
-    put the numeric value in and return @true if the @b entire string could be
-    converted to a number.
-
-    @li ToLong()
-    @li ToLongLong()
-    @li ToULong()
-    @li ToULongLong()
-    @li ToDouble()
-
-
-    @section string_fmt Writing values into the string
-
-    Both formatted versions (Printf/() and stream-like insertion operators
-    exist (for basic types only). Additionally, the Format() function allows
-    you to simply append a formatted value to a string:
-
-    @li Format()
-    @li FormatV()
-    @li Printf()
-    @li PrintfV()
-    @li operator>>()
-
-
-    @section string_mem Memory management
-
-    The following are "advanced" functions and they will be needed rarely.
-    Alloc() and Shrink() are only interesting for optimization purposes.
-    wxStringBuffer and wxStringBufferLength classes may be very useful
-    when working with some external API which requires the caller to provide
-    a writable buffer.
-
-    @li reserve()
-    @li resize()
-    @li Alloc()
-    @li Shrink()
-    @li wxStringBuffer
-    @li wxStringBufferLength
-
-
-    @section string_misc Miscellaneous
-
-    Miscellaneous other string functions.
-
-    @li Trim()
-    @li Truncate()
-    @li Pad()
-
-
-    @section string_compat wxWidgets 1.xx compatibility functions
-
-    The following functions are deprecated.
-    Please consider using @c std::string compatible variants.
-
-    Contains(), First(), Freq(), IsAscii(), IsNull(), IsNumber(), IsWord(),
-    Last(), Length(), LowerCase(), Remove(), Strip(), SubString(), UpperCase()
+    Links for quick access to the various categories of wxString functions:
+    - @ref_member_group{ctor, Constructors and assignment operators}
+    - @ref_member_group{length, Length functions}
+    - @ref_member_group{ch_access, Character access functions}
+    - @ref_member_group{conv, Conversions functions}
+    - @ref_member_group{concat, Concatenation functions}
+    - @ref_member_group{cmp, Comparison functions}
+    - @ref_member_group{substring, Substring extraction functions}
+    - @ref_member_group{caseconv, Case conversion functions}
+    - @ref_member_group{search, Searching and replacing functions}
+    - @ref_member_group{numconv, Conversion to numbers functions}
+    - @ref_member_group{fmt, Formatting and printing functions}
+    - @ref_member_group{mem, Memory management functions}
+    - @ref_member_group{misc, Miscellaneous functions}
+    - @ref_member_group{iter, Iterator interface functions}
+    - @ref_member_group{stl, STL interface functions}

 
 
     @library{wxbase}
 
 
     @library{wxbase}


@@ -246,18 +66,17 @@
     @stdobjects
     ::wxEmptyString
 
     @stdobjects
     ::wxEmptyString
 

-    @see @ref overview_string, @ref overview_unicode, wxUString
+    @see @ref overview_string, @ref overview_unicode,
+         @ref group_funcmacro_string "String-related functions", wxUString,
+         wxCharBuffer, wxUniChar, wxStringTokenizer, wxStringBuffer, wxStringBufferLength

 */
 class wxString
 {
 public:
 */
 class wxString
 {
 public:

-    /**
-        An 'invalid' value for string index
-    */
-    static const size_t npos;
-

     /**
         @name Standard types
     /**
         @name Standard types

+
+        Types used with wxString.

     */
     //@{
     typedef wxUniChar value_type;
     */
     //@{
     typedef wxUniChar value_type;


@@ -269,6 +88,19 @@ public:
     typedef wxUniChar const_reference;
     //@}
 
     typedef wxUniChar const_reference;
     //@}
 

+
+    /**
+        @member_group_name{ctor, Constructors and assignment operators}
+
+        A string may be constructed either from a C string, (some number of copies of)
+        a single character or a wide (Unicode) string. For all constructors (except the
+        default which creates an empty string) there is also a corresponding assignment
+        operator.
+
+        See also the assign() STL-like function.
+    */
+    //@{
+

     /**
        Default constructor
     */
     /**
        Default constructor
     */


@@ -276,68 +108,87 @@ public:
 
     /**
        Creates a string from another string.
 
     /**
        Creates a string from another string.

-        Just increases the ref count by 1.
+       Just increases the ref count by 1.

     */
     wxString(const wxString& stringSrc);
 
     */
     wxString(const wxString& stringSrc);
 

+    /**
+       Construct a string consisting of @a nRepeat copies of ch.
+    */
+    wxString(wxUniChar ch, size_t nRepeat = 1);
+
+    /**
+       Construct a string consisting of @a nRepeat copies of ch.
+    */
+    wxString(wxUniCharRef ch, size_t nRepeat = 1);
+
+    /**
+       Construct a string consisting of @a nRepeat copies of ch
+       converted to Unicode using the current locale encoding.
+    */
+    wxString(char ch, size_t nRepeat = 1);
+
+    /**
+       Construct a string consisting of @a nRepeat copies of ch.
+    */
+    wxString(wchar_t ch, size_t nRepeat = 1);

 
     /**
 
     /**

-       Constructs a string from the string literal @e psz using
+       Constructs a string from the string literal @a psz using

        the current locale encoding to convert it to Unicode (wxConvLibc).
     */
     wxString(const char *psz);
 
     /**
        the current locale encoding to convert it to Unicode (wxConvLibc).
     */
     wxString(const char *psz);
 
     /**

-       Constructs a string from the string literal @e psz using
-       @e conv to convert it Unicode.
+       Constructs a string from the string literal @a psz using
+       @a conv to convert it Unicode.

     */
     wxString(const char *psz, const wxMBConv& conv);
 
     /**
     */
     wxString(const char *psz, const wxMBConv& conv);
 
     /**

-       Constructs a string from the first @e nLength character of the string literal @e psz using
+       Constructs a string from the first @a nLength character of the string literal @a psz using

        the current locale encoding to convert it to Unicode (wxConvLibc).
     */
     wxString(const char *psz, size_t nLength);
 
     /**
        the current locale encoding to convert it to Unicode (wxConvLibc).
     */
     wxString(const char *psz, size_t nLength);
 
     /**

-       Constructs a string from the first @e nLength character of the string literal @e psz using
-       @e conv to convert it Unicode.
+       Constructs a string from the first @a nLength character of the string literal @a psz using
+       @a conv to convert it Unicode.

     */
     wxString(const char *psz, const wxMBConv& conv, size_t nLength);
 
     /**
     */
     wxString(const char *psz, const wxMBConv& conv, size_t nLength);
 
     /**

-       Constructs a string from the string literal @e pwz.
+       Constructs a string from the string literal @a pwz.

     */
     wxString(const wchar_t *pwz);
 
     /**
     */
     wxString(const wchar_t *pwz);
 
     /**

-       Constructs a string from the first @e nLength characters of the string literal @e pwz.
+       Constructs a string from the first @a nLength characters of the string literal @a pwz.

     */
     wxString(const wchar_t *pwz, size_t nLength);
 
     /**
     */
     wxString(const wchar_t *pwz, size_t nLength);
 
     /**

-       Constructs a string from @e buf using the using the current locale
+       Constructs a string from @a buf using the using the current locale

         encoding to convert it to Unicode.
     */
     wxString(const wxCharBuffer& buf);
 
     /**
         encoding to convert it to Unicode.
     */
     wxString(const wxCharBuffer& buf);
 
     /**

-       Constructs a string from @e buf.
+       Constructs a string from @a buf.

     */
     wxString(const wxWCharBuffer& buf);
 
     /**
     */
     wxString(const wxWCharBuffer& buf);
 
     /**

-       Constructs a string from @e str using the using the current locale encoding
+       Constructs a string from @a str using the using the current locale encoding

        to convert it to Unicode (wxConvLibc).
     */
     wxString(const std::string& str);
 
     /**
        to convert it to Unicode (wxConvLibc).
     */
     wxString(const std::string& str);
 
     /**

-       Constructs a string from @e str.
+       Constructs a string from @a str.

     */
     wxString(const std::wstring& str);
 
     */
     wxString(const std::wstring& str);
 

-

     /**
         String destructor.
 
     /**
         String destructor.
 


@@ -346,381 +197,593 @@ public:
     ~wxString();
 
     /**
     ~wxString();
 
     /**

-        Gets all the characters after the first occurrence of @e ch.
-        Returns the empty string if @e ch is not found.
+        Assignment: see the relative wxString constructor.

     */
     */

-    wxString AfterFirst(wxUniChar ch) const;
+    wxString operator =(const wxString& str);

 
     /**
 
     /**

-        Gets all the characters after the last occurrence of @e ch.
-        Returns the whole string if @e ch is not found.
+        Assignment: see the relative wxString constructor.

     */
     */

-    wxString AfterLast(wxUniChar ch) const;
-
-    /**
-        Preallocate enough space for wxString to store @a nLen characters.
-
-        Please note that this method does the same thing as the standard
-        reserve() one and shouldn't be used in new code.
+    wxString operator =(wxUniChar c);

 
 

-        This function may be used to increase speed when the string is
-        constructed by repeated concatenation as in
+    //@}

 
 

-        @code
-            // delete all vowels from the string
-            wxString DeleteAllVowels(const wxString& original)
-            {
-                wxString result;

 
 

-                size_t len = original.length();

 
 

-                result.Alloc(len);
+    /**
+        @member_group_name{length, String length}

 
 

-                for ( size_t n = 0; n < len; n++ )
-                {
-                    if ( strchr("aeuio", tolower(original[n])) == NULL )
-                        result += original[n];
-                }
+        These functions return the string length and/or check whether the string
+        is empty.

 
 

-                return result;
-            }
-        @endcode
+        See also the length(), size() or empty() STL-like functions.
+    */
+    //@{

 
 

-        because it will avoid the need to reallocate string memory many times
-        (in case of long strings). Note that it does not set the maximal length
-        of a string -- it will still expand if more than @a nLen characters are
-        stored in it. Also, it does not truncate the existing string (use
-        Truncate() for this) even if its current length is greater than @a nLen.

 
 

-        @return @true if memory was successfully allocated, @false otherwise.
+    /**
+        Returns the length of the string.

     */
     */

-    bool Alloc(size_t nLen);
+    size_t Len() const;

 
     /**
 
     /**

-       Appends the string literal @e psz.
+        Returns the length of the string (same as Len).
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new
+        code.

     */
     */

-    wxString& Append(const char* psz);
+    size_t Length() const;

 
     /**
 
     /**

-       Appends the wide string literal @e pwz.
+        Returns @true if the string is empty.

     */
     */

-    wxString& Append(const wchar_t* pwz);
+    bool IsEmpty() const;

 
     /**
 
     /**

-       Appends the string literal @e psz with max length @e nLen.
+        Returns @true if the string is empty (same as wxString::IsEmpty).
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new
+        code.

     */
     */

-    wxString& Append(const char* psz, size_t nLen);
+    bool IsNull() const;

 
     /**
 
     /**

-       Appends the wide string literal @e psz with max length @e nLen.
+        Empty string is @false, so !string will only return @true if the
+        string is empty.
+
+        @see IsEmpty().

     */
     */

-    wxString& Append(const wchar_t* pwz, size_t nLen);
+    bool operator!() const;
+
+    //@}
+
+

 
     /**
 
     /**

-       Appends the string @e s.
+        @member_group_name{ch_access, Character access}
+
+        Many functions below take a character index in the string.
+        As with C strings and arrays, the indices start from 0, so the first character
+        of a string is string[0]. An attempt to access a character beyond the end of the
+        string (which may even be 0 if the string is empty) will provoke an assert
+        failure in @ref overview_debugging "debug builds", but no checks are
+        done in release builds.

     */
     */

-    wxString& Append(const wxString& s);
+    //@{

 
     /**
 
     /**

-       Appends the character @e ch @e count times.
+        Returns the character at position @a n (read-only).

     */
     */

-    wxString &Append(wxUniChar ch, size_t count = 1u);
+    wxUniChar GetChar(size_t n) const;

 
     /**
 
     /**

-        Gets all characters before the first occurrence of @e ch.
-        Returns the whole string if @a ch is not found.
+        wxWidgets compatibility conversion. Same as c_str().

     */
     */

-    wxString BeforeFirst(wxUniChar ch) const;
+    const wxCStrData GetData() const;

 
     /**
 
     /**

-        Gets all characters before the last occurrence of @e ch.
-        Returns the empty string if @a ch is not found.
+        Returns a reference to the character at position @a n.

     */
     */

-    wxString BeforeLast(wxUniChar ch) const;
+    wxUniCharRef GetWritableChar(size_t n);

 
     /**
 
     /**

-        Return the copy of the string with the first string character in the
-        upper case and the subsequent ones in the lower case.
-
-        @since 2.9.0
+        Returns a writable buffer of at least @a len bytes.

 
 

-        @see MakeCapitalized()
-     */
-    wxString Capitalize() const;
+        It returns a pointer to a new memory block, and the existing data will not be copied.
+        Call UngetWriteBuf() as soon as possible to put the string back into a reasonable state.

 
 

-    /**
-        Empties the string and frees memory occupied by it.
-        See also: Empty()
+        This method is deprecated, please use wxStringBuffer or wxStringBufferLength instead.

     */
     */

-    void Clear();
+    wxStringCharType* GetWriteBuf(size_t len);

 
     /**
 
     /**

-        Returns a deep copy of the string.
-
-        That is, the returned string is guaranteed to not share data with this
-        string when using reference-counted wxString implementation.
-
-        This method is primarily useful for passing strings between threads
-        (because wxString is not thread-safe). Unlike creating a copy using
-        @c wxString(c_str()), Clone() handles embedded NULs correctly.
-
-        @since 2.9.0
-     */
-    wxString Clone() const;
+        Puts the string back into a reasonable state (in which it can be used
+        normally), after GetWriteBuf() was called.

 
 

-    /**
-        Case-sensitive comparison.
-        Returns a positive value if the string is greater than the argument,
-        zero if it is equal to it or a negative value if it is less than the
-        argument (same semantics as the standard @c strcmp() function).
+        The version of the function without the @a len parameter will calculate the
+        new string length itself assuming that the string is terminated by the first
+        @c NUL character in it while the second one will use the specified length
+        and thus is the only version which should be used with the strings with
+        embedded @c NULs (it is also slightly more efficient as @c strlen()
+        doesn't have to be called).

 
 

-        See also CmpNoCase(), IsSameAs().
+        This method is deprecated, please use wxStringBuffer or wxStringBufferLength instead.

     */
     */

-    int Cmp(const wxString& s) const;
+    void UngetWriteBuf();

 
     /**
 
     /**

-        Case-insensitive comparison.
-        Returns a positive value if the string is greater than the argument,
-        zero if it is equal to it or a negative value if it is less than the
-        argument (same semantics as the standard @c strcmp() function).
-
-        See also Cmp(), IsSameAs().
+        @overload

     */
     */

-    int CmpNoCase(const wxString& s) const;
+    void UngetWriteBuf(size_t len);

 
     /**
 
     /**

-        Returns @true if target appears anywhere in wxString; else @false.
-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
+        Sets the character at position @e n.

     */
     */

-    bool Contains(const wxString& str) const;
-
+    void SetChar(size_t n, wxUniChar ch);

 
     /**
 
     /**

-        Makes the string empty, but doesn't free memory occupied by the string.
-        See also: Clear().
-    */
-    void Empty();
+        Returns a the last character.

 
 

-    /**
-        This function can be used to test if the string ends with the specified
-        @e suffix. If it does, the function will return @true and put the
-        beginning of the string before the suffix into @e rest string if it is not
-        @NULL. Otherwise, the function returns @false and doesn't
-        modify the @e rest.
+        This is a wxWidgets 1.xx compatibility function;
+        you should not use it in new code.

     */
     */

-    bool EndsWith(const wxString& suffix, wxString *rest = NULL) const;
+    wxUniChar Last() const;

 
     /**
 
     /**

-        Searches for the given character @e ch. Returns the position or
-        @c wxNOT_FOUND if not found.
+        Returns a reference to the last character (writable).
+
+        This is a wxWidgets 1.xx compatibility function;
+        you should not use it in new code.

     */
     */

-    int Find(wxUniChar ch, bool fromEnd = false) const;
+    wxUniCharRef Last();

 
     /**
 
     /**

-        Searches for the given string @e sub. Returns the starting position or
-        @c wxNOT_FOUND if not found.
+        Returns the @a i-th character of the string.

     */
     */

-    int Find(const wxString& sub) const;
+    wxUniChar operator [](size_t i) const;

 
 

-    //@{

     /**
     /**

-        Same as Find().
-        This is a wxWidgets 1.xx compatibility function;
-        you should not use it in new code.
+        Returns a writable reference to the @a i-th character of the string.

     */
     */

-    int First(wxUniChar ch) const;
-    int First(const wxString& str) const;
+    wxUniCharRef operator [](size_t i);
+

     //@}
 
     //@}
 

+

     /**
     /**

-        This static function returns the string containing the result of calling
-        Printf() with the passed parameters on it.
+        @member_group_name{conv, Conversions}

 
 

-        @see FormatV(), Printf()
+        This section contains both implicit and explicit conversions to C style
+        strings. Although implicit conversion is quite convenient, you are advised
+        to use wc_str() for the sake of clarity.

     */
     */

-    static wxString Format(const wxString& format, ...);
+    //@{

 
     /**
 
     /**

-        This static function returns the string containing the result of calling
-        PrintfV() with the passed parameters on it.
+        Returns a lightweight intermediate class which is in turn implicitly
+        convertible to both @c const @c char* and to @c const @c wchar_t*.
+        Given this ambiguity it is mostly better to use wc_str(), mb_str() or
+        utf8_str() instead.

 
 

-        @see Format(), PrintfV()
-    */
-    static wxString FormatV(const wxString& format, va_list argptr);
+        Please see the @ref overview_unicode for more information about it.
+
+        Note that the returned value is not convertible to @c char* or
+        @c wchar_t*, use char_str() or wchar_str() if you need to pass
+        string value to a function expecting non-const pointer.
+
+        @see wc_str(), utf8_str(), c_str(), mb_str(), fn_str()
+    */
+    wxCStrData c_str() const;

 
     /**
 
     /**

-        Returns the number of occurrences of @e ch in the string.
-        This is a wxWidgets 1.xx compatibility function; you should not
-        use it in new code.
+        Returns an object with string data that is implicitly convertible to
+        @c char* pointer. Note that any change to the returned buffer is lost and so
+        this function is only usable for passing strings to legacy libraries that
+        don't have const-correct API. Use wxStringBuffer if you want to modify
+        the string.
+
+        @see c_str()

     */
     */

-    int Freq(wxUniChar ch) const;
+    wxWritableCharBuffer char_str(const wxMBConv& conv = wxConvLibc) const;

 
 

-    //@{

     /**
     /**

-        Converts given buffer of binary data from 8-bit string to wxString. In
-        Unicode build, the string is interpreted as being in ISO-8859-1
-        encoding. The version without @e len parameter takes NUL-terminated
-        data.
+        Returns buffer of the specified type containing the string data.

 
 

-        This is a convenience method useful when storing binary data in
-        wxString. It should be used @em only for that purpose and only in
-        conjunction with To8BitData(). Use mb_str() for conversion of character
-        data to known encoding.
+        This method is only useful in template code, otherwise you should
+        directly call mb_str() or wc_str() if you need to retrieve a narrow or
+        wide string from this wxString. The template parameter @a t should be
+        either @c char or @c wchar_t.

 
 

-        @since 2.8.4
+        Notice that retrieving a char buffer in UTF-8 build will return the
+        internal string representation in UTF-8 while in wchar_t build the char
+        buffer will contain the conversion of the string to the encoding of the
+        current locale (and so can fail).

 
 

-        @see wxString::To8BitData()
+        @param len
+            If non-@NULL, filled with the length of the returned buffer.
+
+        @return
+            buffer containing the string contents in the specified type,
+            notice that it may be @NULL if the conversion failed (e.g. Unicode
+            string couldn't be converted to the current encoding when @a T is
+            @c char).
+     */
+    template <typename T>
+    wxCharTypeBuffer<T> tchar_str(size_t *len = NULL) const;
+
+    /**
+        Returns a string representation suitable for passing to OS' functions
+        for file handling.

     */
     */

-    static wxString From8BitData(const char* buf, size_t len);
-    static wxString From8BitData(const char* buf);
-    //@}
+    const wchar_t* fn_str() const;

 
 

-    //@{

     /**
     /**

-        Converts the string or character from an ASCII, 7-bit form
-        to the native wxString representation.
+        @overload

     */
     */

-    static wxString FromAscii(const char* s);
-    static wxString FromAscii(const unsigned char* s);
-    static wxString FromAscii(const char* s, size_t len);
-    static wxString FromAscii(const unsigned char* s, size_t len);
-    static wxString FromAscii(char c);
-    //@}
+    const char* fn_str() const;

 
 

-    //@{

     /**
     /**

-        Converts C string encoded in UTF-8 to wxString.
+        @overload
+    */
+    const wxCharBuffer fn_str() const;

 
 

-        If @a s is not a valid UTF-8 string, an empty string is returned.
+    /**
+        Returns the multibyte (C string) representation of the string
+        using @e conv's wxMBConv::cWC2MB method and returns wxCharBuffer.

 
 

-        Notice that when using UTF-8 wxWidgets build there is a more efficient
-        alternative to this function called FromUTF8Unchecked() which, unlike
-        this one, doesn't check that the input string is valid.
+        @see wc_str(), utf8_str(), c_str(), wxMBConv
+    */
+    const wxCharBuffer mb_str(const wxMBConv& conv = wxConvLibc) const;
+
+    /**
+        Converts the strings contents to UTF-8 and returns it either as a
+        temporary wxCharBuffer object or as a pointer to the internal
+        string contents in UTF-8 build.
+
+        @see wc_str(), c_str(), mb_str()
+    */
+    const wxScopedCharBuffer utf8_str() const;
+
+    /**
+        Converts the strings contents to the wide character represention
+        and returns it as a temporary wxWCharBuffer object (Unix and OS X)
+        or returns a pointer to the internal string contents in wide character
+        mode (Windows).
+
+        The macro wxWX2WCbuf is defined as the correct return type (without const).
+
+        @see utf8_str(), c_str(), mb_str(), fn_str(), wchar_str()
+    */
+    const wchar_t* wc_str() const;
+
+    /**
+        @overload
+    */
+    const wxWCharBuffer wc_str() const;
+
+    /**
+        Returns an object with string data that is implicitly convertible to
+        @c char* pointer. Note that changes to the returned buffer may or may
+        not be lost (depending on the build) and so this function is only usable for
+        passing strings to legacy libraries that don't have const-correct API. Use
+        wxStringBuffer if you want to modify the string.
+
+        @see mb_str(), wc_str(), fn_str(), c_str(), char_str()
+    */
+    wxWritableWCharBuffer wchar_str() const;
+
+    /**
+       Explicit conversion to C string in the internal representation (either
+       wchar_t* or UTF-8-encoded char*, depending on the build).
+    */
+    const wxStringCharType *wx_str() const;
+
+    /**
+        Converts the string to an 8-bit string in ISO-8859-1 encoding in the
+        form of a wxCharBuffer (Unicode builds only).
+
+        This is a convenience method useful when storing binary data in
+        wxString. It should be used @em only for this purpose. It is only valid
+        to call this method on strings created using From8BitData().

 
         @since 2.8.4
 
         @since 2.8.4

+
+        @see wxString::From8BitData()

     */
     */

-    static wxString FromUTF8(const char* s);
-    static wxString FromUTF8(const char* s, size_t len);
+    const char* To8BitData() const;
+
+    /**
+        @overload
+    */
+    const wxCharBuffer To8BitData() const;
+
+    /**
+        Converts the string to an ASCII, 7-bit string in the form of
+        a wxCharBuffer (Unicode builds only) or a C string (ANSI builds).
+        Note that this conversion only works if the string contains only ASCII
+        characters. The @ref mb_str() "mb_str" method provides more
+        powerful means of converting wxString to C string.
+    */
+    const char* ToAscii() const;
+
+    /**
+        @overload
+    */
+    const wxCharBuffer ToAscii() const;
+
+    /**
+        Same as utf8_str().
+    */
+    const wxScopedCharBuffer ToUTF8() const;
+

     //@}
 
     //@}
 

+
+    /**
+        @member_group_name{concat, Concatenation}
+
+        Almost anything may be concatenated (appended to) with a string!
+
+        Note that the various operator<<() overloads work as C++ stream insertion
+        operators. They insert the given value into the string.
+        Precision and format cannot be set using them. Use Printf() instead.
+
+        See also the insert() and append() STL-like functions.
+    */

     //@{
     //@{

+

     /**
     /**

-        Converts C string encoded in UTF-8 to wxString without checking its
-        validity.
+       Appends the string literal @a psz.
+    */
+    wxString& Append(const char* psz);

 
 

-        This method assumes that @a s is a valid UTF-8 sequence and doesn't do
-        any validation (although an assert failure is triggered in debug builds
-        if the string is invalid). Only use it if you are absolutely sure that
-        @a s is a correct UTF-8 string (e.g. because it comes from another
-        library using UTF-8) and if the performance matters, otherwise use
-        slower (in UTF-8 build) but safer FromUTF8(). Passing a bad UTF-8
-        string to this function will result in creating a corrupted wxString
-        and all the subsequent operations on it will be undefined.
+    /**
+       Appends the wide string literal @a pwz.
+    */
+    wxString& Append(const wchar_t* pwz);

 
 

-        @since 2.8.9
+    /**
+       Appends the string literal @a psz with max length @a nLen.

     */
     */

-    static wxString FromUTF8Unchecked(const char* s);
-    static wxString FromUTF8Unchecked(const char* s, size_t len);
-    //@}
+    wxString& Append(const char* psz, size_t nLen);

 
     /**
 
     /**

-        Returns the character at position @a n (read-only).
+       Appends the wide string literal @a psz with max length @a nLen.

     */
     */

-    wxUniChar GetChar(size_t n) const;
+    wxString& Append(const wchar_t* pwz, size_t nLen);

 
     /**
 
     /**

-        wxWidgets compatibility conversion. Same as c_str().
+       Appends the string @a s.

     */
     */

-    const wxCStrData GetData() const;
+    wxString& Append(const wxString& s);

 
     /**
 
     /**

-        Returns a reference to the character at position @e n.
+       Appends the character @a ch @a count times.

     */
     */

-    wxUniCharRef GetWritableChar(size_t n);
+    wxString &Append(wxUniChar ch, size_t count = 1u);

 
     /**
 
     /**

-        Returns a writable buffer of at least @a len bytes.
-        It returns a pointer to a new memory block, and the
-        existing data will not be copied.
-        Call UngetWriteBuf() as soon as possible to put the
-        string back into a reasonable state.
-        This method is deprecated, please use wxStringBuffer or
-        wxStringBufferLength instead.
+        Prepends @a str to this string, returning a reference to this string.

     */
     */

-    wxStringCharType* GetWriteBuf(size_t len);
+    wxString& Prepend(const wxString& str);

 
     /**
 
     /**

-        Returns @true if the string contains only ASCII characters.
-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
+        Concatenation: returns a new string equal to the concatenation of the operands.

     */
     */

-    bool IsAscii() const;
+    wxString operator +(const wxString& x, const wxString& y);

 
     /**
 
     /**

-        Returns @true if the string is empty.
+        @overload

     */
     */

-    bool IsEmpty() const;
+    wxString operator +(const wxString& x, wxUniChar y);
+
+    wxString& operator<<(const wxString& s);
+    wxString& operator<<(const char* psz);
+    wxString& operator<<(const wchar_t* pwz);
+    wxString& operator<<(const wxCStrData& psz);
+    wxString& operator<<(char ch);
+    wxString& operator<<(unsigned char ch);
+    wxString& operator<<(wchar_t ch);
+    wxString& operator<<(const wxCharBuffer& s);
+    wxString& operator<<(const wxWCharBuffer& s);
+    wxString& operator<<(wxUniChar ch);
+    wxString& operator<<(wxUniCharRef ch);
+    wxString& operator<<(unsigned int ui);
+    wxString& operator<<(long l);
+    wxString& operator<<(unsigned long ul);
+    wxString& operator<<(wxLongLong_t ll);
+    wxString& operator<<(wxULongLong_t ul);
+    wxString& operator<<(float f);
+    wxString& operator<<(double d);

 
     /**
 
     /**

-        Returns @true if the string is empty (same as wxString::IsEmpty).
-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
+        Concatenation in place: the argument is appended to the string.

     */
     */

-    bool IsNull() const;
+    void operator +=(const wxString& str);

 
     /**
 
     /**

-        Returns @true if the string is an integer (with possible sign).
-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
+        @overload

     */
     */

-    bool IsNumber() const;
+    void operator +=(wxUniChar c);
+
+    //@}
+
+
+    /**
+        @member_group_name{cmp, Comparison}

 
 

+        The default comparison function Cmp() is case-sensitive and so is the default
+        version of IsSameAs(). For case insensitive comparisons you should use CmpNoCase()
+        or give a second parameter to IsSameAs(). This last function is maybe more
+        convenient if only equality of the strings matters because it returns a boolean
+        @true value if the strings are the same and not 0 (which is usually @false
+        in C) as Cmp() does.
+
+        Matches() is a poor man's regular expression matcher: it only understands
+        '*' and '?' metacharacters in the sense of DOS command line interpreter.
+
+        StartsWith() is helpful when parsing a line of text which should start
+        with some predefined prefix and is more efficient than doing direct string
+        comparison as you would also have to precalculate the length of the prefix.
+
+        See also the compare() STL-like function.
+    */

     //@{
     //@{

+

     /**
     /**

-        Test whether the string is equal to the single character @e c. The test is
-        case-sensitive if @a caseSensitive is @true (default) or not if it is @c
+        Case-sensitive comparison.
+        Returns a positive value if the string is greater than the argument,
+        zero if it is equal to it or a negative value if it is less than the
+        argument (same semantics as the standard @c strcmp() function).
+
+        @see CmpNoCase(), IsSameAs().
+    */
+    int Cmp(const wxString& s) const;
+
+    /**
+        Case-insensitive comparison.
+        Returns a positive value if the string is greater than the argument,
+        zero if it is equal to it or a negative value if it is less than the
+        argument (same semantics as the standard @c strcmp() function).
+
+        @see Cmp(), IsSameAs().
+    */
+    int CmpNoCase(const wxString& s) const;
+
+    /**
+        Test whether the string is equal to another string @a s.
+
+        The test is case-sensitive if @a caseSensitive is @true (default) or not if it is

         @false.
         @false.

-        Returns @true if the string is equal to the character, @false otherwise.
-        See also Cmp(), CmpNoCase()
+
+        @return @true if the string is equal to the other one, @false otherwise.
+
+        @see Cmp(), CmpNoCase()
+    */
+    bool IsSameAs(const wxString& s, bool caseSensitive = true) const;
+
+    /**
+        Test whether the string is equal to the single character @a ch.
+
+        The test is case-sensitive if @a caseSensitive is @true (default) or not if it is
+        @false.
+
+        @return @true if the string is equal to this character, @false otherwise.
+
+        @see Cmp(), CmpNoCase()

     */
     */

-    bool IsSameAs(const wxString &s, bool caseSensitive = true) const;

     bool IsSameAs(wxUniChar ch, bool caseSensitive = true) const;
     bool IsSameAs(wxUniChar ch, bool caseSensitive = true) const;

+
+    /**
+        Returns @true if the string contents matches a mask containing '*' and '?'.
+    */
+    bool Matches(const wxString& mask) const;
+
+    /**
+        This function can be used to test if the string starts with the specified
+        @a prefix.
+
+        If it does, the function will return @true and put the rest of the string
+        (i.e. after the prefix) into @a rest string if it is not @NULL.
+        Otherwise, the function returns @false and doesn't modify the @a rest.
+    */
+    bool StartsWith(const wxString& prefix, wxString *rest = NULL) const;
+
+    /**
+        This function can be used to test if the string ends with the specified
+        @e suffix. If it does, the function will return @true and put the
+        beginning of the string before the suffix into @e rest string if it is not
+        @NULL. Otherwise, the function returns @false and doesn't
+        modify the @e rest.
+    */
+    bool EndsWith(const wxString& suffix, wxString *rest = NULL) const;
+

     //@}
 
     //@}
 

+

     /**
     /**

-        Returns @true if the string is a word.
-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
+        @member_group_name{substring, Substring extraction}
+
+        These functions allow you to extract a substring from the string. The
+        original string is not modified and the function returns the extracted
+        substring.
+
+        See also the at() and the substr() STL-like functions.

     */
     */

-    bool IsWord() const;

 
 

-    //@{

     /**
     /**

-        Returns a reference to the last character (writable).
-        This is a wxWidgets 1.xx compatibility function;
-        you should not use it in new code.
+        Returns a substring starting at @e first, with length @e count, or the rest of
+        the string if @a count is the default value.
+    */
+    wxString Mid(size_t first, size_t nCount = wxString::npos) const;
+
+    /**
+        Returns the part of the string between the indices @a from and @a to
+        inclusive.
+
+        This is a wxWidgets 1.xx compatibility function, use Mid()
+        instead (but note that parameters have different meaning).
+    */
+    wxString SubString(size_t from, size_t to) const;
+
+    /**
+        Same as Mid() (substring extraction).
+    */
+    wxString operator()(size_t start, size_t len) const;
+
+    /**
+        Returns the first @a count characters of the string.
+    */
+    wxString Left(size_t count) const;
+
+    /**
+        Returns the last @a count characters.
+    */
+    wxString Right(size_t count) const;
+
+    /**
+        Gets all the characters after the first occurrence of @e ch.
+        Returns the empty string if @e ch is not found.
+    */
+    wxString AfterFirst(wxUniChar ch) const;
+
+    /**
+        Gets all the characters after the last occurrence of @e ch.
+        Returns the whole string if @e ch is not found.
+    */
+    wxString AfterLast(wxUniChar ch) const;
+
+    /**
+        Gets all characters before the first occurrence of @e ch.
+        Returns the whole string if @a ch is not found.
+    */
+    wxString BeforeFirst(wxUniChar ch) const;
+
+    /**
+        Gets all characters before the last occurrence of @e ch.
+        Returns the empty string if @a ch is not found.

     */
     */

-    wxUniCharRef Last();
-    const wxUniChar Last();
+    wxString BeforeLast(wxUniChar ch) const;
+

     //@}
 
     //@}
 

-    /**
-        Returns the first @a count characters of the string.
-    */
-    wxString Left(size_t count) const;

 
     /**
 
     /**

-        Returns the length of the string.
+        @member_group_name{caseconv, Case conversion}
+
+        The MakeXXX() variants modify the string in place, while the other functions
+        return a new string which contains the original text converted to the upper or
+        lower case and leave the original string unchanged.

     */
     */

-    size_t Len() const;
+    //@{

 
     /**
 
     /**

-        Returns the length of the string (same as Len).
-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
-    */
-    size_t Length() const;
+        Return the copy of the string with the first string character in the
+        upper case and the subsequent ones in the lower case.
+
+        @since 2.9.0
+
+        @see MakeCapitalized()
+     */
+    wxString Capitalize() const;

 
     /**
         Returns this string converted to the lower case.
 
     /**
         Returns this string converted to the lower case.


@@ -763,157 +826,135 @@ public:
     wxString& MakeUpper();
 
     /**
     wxString& MakeUpper();
 
     /**

-        Returns @true if the string contents matches a mask containing '*' and '?'.
+        Returns this string converted to upper case.
+
+        @see MakeUpper()

     */
     */

-    bool Matches(const wxString& mask) const;
+    wxString Upper() const;

 
     /**
 
     /**

-        Returns a substring starting at @e first, with length @e count, or the rest of
-        the string if @a count is the default value.
+        The same as MakeUpper().
+
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new
+        code.

     */
     */

-    wxString Mid(size_t first, size_t nCount = wxString::npos) const;
+    void UpperCase();

 
 

+    //@}

 
 

-    /**
-        Adds @a count copies of @a pad to the beginning, or to the end of the
-        string (the default).  Removes spaces from the left or from the right (default).
-    */
-    wxString& Pad(size_t count, wxUniChar chPad = ' ', bool fromRight = true);

 
     /**
 
     /**

-        Prepends @a str to this string, returning a reference to this string.
+        @member_group_name{search, Searching and replacing}
+
+        These functions replace the standard @c strchr() and @c strstr()
+        functions.
+
+        See also the find(), rfind(), replace() STL-like functions.

     */
     */

-    wxString& Prepend(const wxString& str);
+    //@{

 
     /**
 
     /**

-        Similar to the standard function @e sprintf(). Returns the number of
-        characters written, or an integer less than zero on error.
-        Note that if @c wxUSE_PRINTF_POS_PARAMS is set to 1, then this function supports
-        Unix98-style positional parameters:
-
-        @note This function will use a safe version of @e vsprintf() (usually called
-        @e vsnprintf()) whenever available to always allocate the buffer of correct
-        size. Unfortunately, this function is not available on all platforms and the
-        dangerous @e vsprintf() will be used then which may lead to buffer overflows.
+        Searches for the given character @a ch.
+        Returns the position or @c wxNOT_FOUND if not found.

     */
     */

-    int Printf(const wxString& pszFormat, ...);
+    int Find(wxUniChar ch, bool fromEnd = false) const;

 
     /**
 
     /**

-        Similar to vprintf. Returns the number of characters written, or an integer
-        less than zero
-        on error.
+        Searches for the given string @a sub.
+        Returns the starting position or @c wxNOT_FOUND if not found.

     */
     */

-    int PrintfV(const wxString& pszFormat, va_list argPtr);
+    int Find(const wxString& sub) const;

 
 

-    //@{

     /**
     /**

-        Removes @a len characters from the string, starting at @e pos.
-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
+        Same as Find().
+
+        This is a wxWidgets 1.xx compatibility function;
+        you should not use it in new code.

     */
     */

-    wxString Remove(size_t pos);
-    wxString Remove(size_t pos, size_t len);
-    //@}
+    int First(wxUniChar ch) const;

 
     /**
 
     /**

-        Removes the last character.
+        Same as Find().
+
+        This is a wxWidgets 1.xx compatibility function;
+        you should not use it in new code.

     */
     */

-    wxString& RemoveLast(size_t n = 1);
+    int First(const wxString& str) const;

 
     /**
         Replace first (or all) occurrences of substring with another one.
 
     /**
         Replace first (or all) occurrences of substring with another one.

-        @e replaceAll: global replace (default), or only the first occurrence.
+
+        @param strOld
+            The string to search for replacing.
+        @param strNew
+            The substitution string.
+        @param replaceAll
+            If @true a global replace will be done (default), otherwise only the
+            first occurrence will be replaced.
+

         Returns the number of replacements made.
     */
     size_t Replace(const wxString& strOld, const wxString& strNew,
                    bool replaceAll = true);
 
         Returns the number of replacements made.
     */
     size_t Replace(const wxString& strOld, const wxString& strNew,
                    bool replaceAll = true);
 

-    /**
-        Returns the last @a count characters.
-    */
-    wxString Right(size_t count) const;
-
-    /**
-        Sets the character at position @e n.
-    */
-    void SetChar(size_t n, wxUniChar ch);
+    //@}

 
 

-    /**
-        Minimizes the string's memory. This can be useful after a call to
-        Alloc() if too much memory were preallocated.
-    */
-    bool Shrink();

 
 

-    /**
-        This function can be used to test if the string starts with the specified
-        @e prefix. If it does, the function will return @true and put the rest
-        of the string (i.e. after the prefix) into @a rest string if it is not
-        @NULL. Otherwise, the function returns @false and doesn't modify the
-        @e rest.
-    */
-    bool StartsWith(const wxString& prefix, wxString *rest = NULL) const;

 
     /**
 
     /**

-        Strip characters at the front and/or end. The same as Trim except that it
-        doesn't change this string.
-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
-    */
-    wxString Strip(stripType s = trailing) const;
+        @member_group_name{numconv, Conversion to numbers}

 
 

-    /**
-        Returns the part of the string between the indices @a from and @e to
-        inclusive.
-        This is a wxWidgets 1.xx compatibility function, use Mid()
-        instead (but note that parameters have different meaning).
-    */
-    wxString SubString(size_t from, size_t to) const;
+        The string provides functions for conversion to signed and unsigned integer and
+        floating point numbers.

 
 

+        All functions take a pointer to the variable to put the numeric value
+        in and return @true if the @b entire string could be converted to a
+        number. Notice if there is a valid number in the beginning of the
+        string, it is returned in the output parameter even if the function
+        returns @false because there is more text following it.
+     */

     //@{
     //@{

+

     /**
     /**

-        Converts the string to an 8-bit string in ISO-8859-1 encoding in the
-        form of a wxCharBuffer (Unicode builds only).
+        Attempts to convert the string to a floating point number.

 
 

-        This is a convenience method useful when storing binary data in
-        wxString. It should be used @em only for this purpose. It is only valid
-        to call this method on strings created using From8BitData().
+        Returns @true on success (the number is stored in the location pointed to by
+        @a val) or @false if the string does not represent such number (the value of
+        @a val may still be modified in this case).

 
 

-        @since 2.8.4
+        Note that unlike ToCDouble() this function uses a localized version of
+        @c wxStrtod() and thus needs as decimal point (and thousands separator) the
+        locale-specific decimal point. Thus you should use this function only when
+        you are sure that this string contains a floating point number formatted with
+        the rules of the locale currently in use (see wxLocale).

 
 

-        @see wxString::From8BitData()
-    */
-    const char* To8BitData() const;
-    const wxCharBuffer To8BitData() const;
-    //@}
+        Refer to the docs of the standard function @c strtod() for more details about
+        the supported syntax.

 
 

-    //@{
-    /**
-        Converts the string to an ASCII, 7-bit string in the form of
-        a wxCharBuffer (Unicode builds only) or a C string (ANSI builds).
-        Note that this conversion only works if the string contains only ASCII
-        characters. The @ref mb_str() "mb_str" method provides more
-        powerful means of converting wxString to C string.
+        @see ToCDouble(), ToLong(), ToULong()

     */
     */

-    const char* ToAscii() const;
-    const wxCharBuffer ToAscii() const;
-    //@}
+    bool ToDouble(double* val) const;

 
     /**
 
     /**

-        Attempts to convert the string to a floating point number. Returns @true on
-        success (the number is stored in the location pointed to by @e val) or @false
-        if the string does not represent such number (the value of @a val is not
-        modified in this case).
+        Variant of ToDouble() always working in "C" locale.
+
+        Works like ToDouble() but unlike it this function expects the floating point
+        number to be formatted always with the rules dictated by the "C" locale
+        (in particular, the decimal point must be a dot), independently from the
+        current application-wide locale (see wxLocale).

 
 

-        @see ToLong(), ToULong()
+        @see ToDouble(), ToLong(), ToULong()

     */
     */

-    bool ToDouble(double* val) const;
+    bool ToCDouble(double* val) const;

 
     /**
 
     /**

-        Attempts to convert the string to a signed integer in base @e base. Returns
-        @true on success in which case the number is stored in the location
+        Attempts to convert the string to a signed integer in base @a base.
+
+        Returns @true on success in which case the number is stored in the location

         pointed to by @a val or @false if the string does not represent a
         pointed to by @a val or @false if the string does not represent a

-        valid number in the given base (the value of @a val is not modified
-        in this case).
+        valid number in the given base (the value of @a val may still be
+        modified in this case).
+

         The value of @a base must be comprised between 2 and 36, inclusive, or
         be a special value 0 which means that the usual rules of @c C numbers are
         applied: if the number starts with @c 0x it is considered to be in base
         The value of @a base must be comprised between 2 and 36, inclusive, or
         be a special value 0 which means that the usual rules of @c C numbers are
         applied: if the number starts with @c 0x it is considered to be in base


@@ -922,13 +963,32 @@ public:
         which may have leading zeroes as they can yield unexpected (to the user not
         familiar with C) results.
 
         which may have leading zeroes as they can yield unexpected (to the user not
         familiar with C) results.
 

-        @see ToDouble(), ToULong()
+        Note that unlike ToCLong() this function uses a localized version of
+        @c wxStrtol(). Thus you should use this function only when you are sure
+        that this string contains an integer number formatted with
+        the rules of the locale currently in use (see wxLocale).
+
+        Refer to the docs of the standard function @c strtol() for more details about
+        the supported syntax.
+
+        @see ToCDouble(), ToDouble(), ToULong()

     */
     bool ToLong(long* val, int base = 10) const;
 
     /**
     */
     bool ToLong(long* val, int base = 10) const;
 
     /**

-        This is exactly the same as ToLong() but works with 64
-        bit integer numbers.
+        Variant of ToLong() always working in "C" locale.
+
+        Works like ToLong() but unlike it this function expects the integer
+        number to be formatted always with the rules dictated by the "C" locale,
+        independently from the current application-wide locale (see wxLocale).
+
+        @see ToDouble(), ToLong(), ToULong()
+    */
+    bool ToCLong(long* val, int base = 10) const;
+
+    /**
+        This is exactly the same as ToLong() but works with 64 bit integer numbers.
+

         Notice that currently it doesn't work (always returns @false) if parsing of 64
         bit numbers is not supported by the underlying C run-time library. Compilers
         with C99 support and Microsoft Visual C++ version 7 and higher do support this.
         Notice that currently it doesn't work (always returns @false) if parsing of 64
         bit numbers is not supported by the underlying C run-time library. Compilers
         with C99 support and Microsoft Visual C++ version 7 and higher do support this.


@@ -938,418 +998,513 @@ public:
     bool ToLongLong(wxLongLong_t* val, int base = 10) const;
 
     /**
     bool ToLongLong(wxLongLong_t* val, int base = 10) const;
 
     /**

-        Attempts to convert the string to an unsigned integer in base @e base.
+        Attempts to convert the string to an unsigned integer in base @a base.
+

         Returns @true on success in which case the number is stored in the
         location pointed to by @a val or @false if the string does not
         Returns @true on success in which case the number is stored in the
         location pointed to by @a val or @false if the string does not

-        represent a valid number in the given base (the value of @a val is not
-        modified in this case).
+        represent a valid number in the given base (the value of @a val may
+        still be modified in this case).

 
         Please notice that this function  behaves in the same way as the standard
         @c strtoul() and so it simply converts negative numbers to unsigned
         representation instead of rejecting them (e.g. -1 is returned as @c ULONG_MAX).
 
 
         Please notice that this function  behaves in the same way as the standard
         @c strtoul() and so it simply converts negative numbers to unsigned
         representation instead of rejecting them (e.g. -1 is returned as @c ULONG_MAX).
 

-        See ToLong() for the more detailed description of the @a base parameter.
+        See ToLong() for the more detailed description of the @a base parameter
+        (and of the locale-specific behaviour of this function).

 
 

-        @see ToDouble(), ToLong()
+        @see ToCULong(), ToDouble(), ToLong()

     */
     bool ToULong(unsigned long* val, int base = 10) const;
 
     /**
     */
     bool ToULong(unsigned long* val, int base = 10) const;
 
     /**

-        This is exactly the same as ToULong() but works with 64
-        bit integer numbers.
+        Variant of ToULong() always working in "C" locale.
+
+        Works like ToULong() but unlike it this function expects the integer
+        number to be formatted always with the rules dictated by the "C" locale,
+        independently from the current application-wide locale (see wxLocale).
+
+        @see ToDouble(), ToLong(), ToULong()
+    */
+    bool ToCULong(unsigned long* val, int base = 10) const;
+
+    /**
+        This is exactly the same as ToULong() but works with 64 bit integer
+        numbers.
+

         Please see ToLongLong() for additional remarks.
     */
     bool ToULongLong(wxULongLong_t* val, int base = 10) const;
 
         Please see ToLongLong() for additional remarks.
     */
     bool ToULongLong(wxULongLong_t* val, int base = 10) const;
 

+    //@}
+
+
+    /**
+        @member_group_name{fmt, Formatting and printing}
+
+        Both formatted versions (Printf/() and stream-like insertion operators
+        exist (for basic types only).
+
+        See also the static Format() and FormatV() functions.
+    */

     //@{
     //@{

+

     /**
     /**

-        Same as utf8_str().
+        Similar to the standard function @e sprintf(). Returns the number of
+        characters written, or an integer less than zero on error.
+        Note that if @c wxUSE_PRINTF_POS_PARAMS is set to 1, then this function supports
+        Unix98-style positional parameters:
+
+        @note This function will use a safe version of @e vsprintf() (usually called
+        @e vsnprintf()) whenever available to always allocate the buffer of correct
+        size. Unfortunately, this function is not available on all platforms and the
+        dangerous @e vsprintf() will be used then which may lead to buffer overflows.
+    */
+    int Printf(const wxString& pszFormat, ...);
+
+    /**
+        Similar to vprintf. Returns the number of characters written, or an integer
+        less than zero
+        on error.

     */
     */

-    const char* ToUTF8() const;
-    const wxCharBuffer ToUTF8() const;
+    int PrintfV(const wxString& pszFormat, va_list argPtr);
+

     //@}
 
     //@}
 

+

     /**
     /**

-        Removes white-space (space, tabs, form feed, newline and carriage return) from
-        the left or from the right end of the string (right is default).
+        @member_group_name{mem, Memory management}
+
+        The following are "advanced" functions and they will be needed rarely.
+        Alloc() and Shrink() are only interesting for optimization purposes.
+        wxStringBuffer and wxStringBufferLength classes may be very useful when working
+        with some external API which requires the caller to provide a writable buffer.
+
+        See also the reserve() and resize() STL-like functions.

     */
     */

-    wxString& Trim(bool fromRight = true);
+    //@{

 
     /**
 
     /**

-        Truncate the string to the given length.
+        Preallocate enough space for wxString to store @a nLen characters.
+
+        Please note that this method does the same thing as the standard
+        reserve() one and shouldn't be used in new code.
+
+        This function may be used to increase speed when the string is
+        constructed by repeated concatenation as in
+
+        @code
+            // delete all vowels from the string
+            wxString DeleteAllVowels(const wxString& original)
+            {
+                wxString result;
+
+                size_t len = original.length();
+
+                result.Alloc(len);
+
+                for ( size_t n = 0; n < len; n++ )
+                {
+                    if ( strchr("aeuio", tolower(original[n])) == NULL )
+                        result += original[n];
+                }
+
+                return result;
+            }
+        @endcode
+
+        because it will avoid the need to reallocate string memory many times
+        (in case of long strings). Note that it does not set the maximal length
+        of a string -- it will still expand if more than @a nLen characters are
+        stored in it. Also, it does not truncate the existing string (use
+        Truncate() for this) even if its current length is greater than @a nLen.
+
+        @return @true if memory was successfully allocated, @false otherwise.

     */
     */

-    wxString& Truncate(size_t len);
+    bool Alloc(size_t nLen);

 
 

-    //@{

     /**
     /**

-        Puts the string back into a reasonable state (in which it can be used
-        normally), after GetWriteBuf() was called.
+        Minimizes the string's memory. This can be useful after a call to
+        Alloc() if too much memory were preallocated.
+    */
+    bool Shrink();

 
 

-        The version of the function without the @a len parameter will calculate the
-        new string length itself assuming that the string is terminated by the first
-        @c NUL character in it while the second one will use the specified length
-        and thus is the only version which should be used with the strings with
-        embedded @c NULs (it is also slightly more efficient as @c strlen()
-        doesn't have to be called).
+    /**
+        Returns a deep copy of the string.
+
+        That is, the returned string is guaranteed to not share data with this
+        string when using reference-counted wxString implementation.
+
+        This method is primarily useful for passing strings between threads
+        (because wxString is not thread-safe). Unlike creating a copy using
+        @c wxString(c_str()), Clone() handles embedded NULs correctly.
+
+        @since 2.9.0
+     */
+    wxString Clone() const;
+
+    /**
+        Empties the string and frees memory occupied by it.

 
 

-        This method is deprecated, please use wxStringBuffer or
-        wxStringBufferLength instead.
+        @see Empty()

     */
     */

-    void UngetWriteBuf();
-    void UngetWriteBuf(size_t len);
+    void Clear();
+

     //@}
 
     //@}
 

+
+

     /**
     /**

-        Returns this string converted to upper case.
+        @member_group_name{misc, Miscellaneous}

 
 

-        @see MakeUpper()
+        Miscellaneous other string functions.

     */
     */

-    wxString Upper() const;
+    //@{

 
     /**
 
     /**

-        The same as MakeUpper().
+        Returns @true if target appears anywhere in wxString; else @false.

 
 

-        This is a wxWidgets 1.xx compatibility function; you should not use it in new
-        code.
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new code.

     */
     */

-    void UpperCase();
+    bool Contains(const wxString& str) const;

 
     /**
 
     /**

-        Returns a lightweight intermediate class which is in turn implicitly
-        convertible to both @c const @c char* and to @c const @c wchar_t*.
-        Given this ambiguity it is mostly better to use wc_str(), mb_str() or
-        utf8_str() instead.
+        Makes the string empty, but doesn't free memory occupied by the string.

 
 

-        Please see the @ref overview_unicode for more information about it.
+        @see Clear().
+    */
+    void Empty();

 
 

-        Note that the returned value is not convertible to @c char* or
-        @c wchar_t*, use char_str() or wchar_str() if you need to pass
-        string value to a function expecting non-const pointer.
+    /**
+        Returns the number of occurrences of @e ch in the string.

 
 

-        @see wc_str(), utf8_str(), c_str(), mb_str(), fn_str()
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new code.

     */
     */

-    wxCStrData c_str() const;
+    int Freq(wxUniChar ch) const;

 
     /**
 
     /**

-        Returns an object with string data that is implicitly convertible to
-        @c char* pointer. Note that any change to the returned buffer is lost and so
-        this function is only usable for passing strings to legacy libraries that
-        don't have const-correct API. Use wxStringBuffer if you want to modify
-        the string.
+        Returns @true if the string contains only ASCII characters.
+        See wxUniChar::IsAscii for more details.

 
 

-        @see c_str()
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new
+        code.

     */
     */

-    wxWritableCharBuffer char_str(const wxMBConv& conv = wxConvLibc) const;
+    bool IsAscii() const;

 
     /**
 
     /**

-        Returns buffer of the specified type containing the string data.
+        Returns @true if the string is an integer (with possible sign).

 
 

-        This method is only useful in template code, otherwise you should
-        directly call mb_str() or wc_str() if you need to retrieve a narrow or
-        wide string from this wxString. The template parameter @a t should be
-        either @c char or @c wchar_t.
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new code.
+    */
+    bool IsNumber() const;

 
 

-        Notice that retrieving a char buffer in UTF-8 build will return the
-        internal string representation in UTF-8 while in wchar_t build the char
-        buffer will contain the conversion of the string to the encoding of the
-        current locale (and so can fail).
+    /**
+        Returns @true if the string is a word.

 
 

-        @param len
-            If non-@NULL, filled with the length of the returned buffer.
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new code.
+    */
+    bool IsWord() const;

 
 

-        @return
-            buffer containing the string contents in the specified type,
-            notice that it may be @NULL if the conversion failed (e.g. Unicode
-            string couldn't be converted to the current encoding when @a T is
-            @c char).
-     */
-    template <typename T>
-    wxCharTypeBuffer<T> tchar_str(size_t *len = NULL) const;
+    /**
+        Adds @a count copies of @a chPad to the beginning, or to the end of the
+        string (the default).
+
+        Removes spaces from the left or from the right (default).
+    */
+    wxString& Pad(size_t count, wxUniChar chPad = ' ', bool fromRight = true);

 
 

-    //@{

     /**
     /**

-        Returns string representation suitable for passing to OS' functions
-        for file handling.
+        Removes all characters from the string starting at @a pos.
+        Use Truncate() as a more readable alternative.
+
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new code.

     */
     */

-    const wchar_t* fn_str() const;
-    const char* fn_str() const;
-    const wxCharBuffer fn_str() const;
-    //@}
+    wxString& Remove(size_t pos);

 
     /**
 
     /**

-        Returns the multibyte (C string) representation of the string
-        using @e conv's wxMBConv::cWC2MB method and returns wxCharBuffer.
+        Removes @a len characters from the string, starting at @a pos.

 
 

-        @see wc_str(), utf8_str(), c_str(), wxMBConv
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new code.

     */
     */

-    const wxCharBuffer mb_str(const wxMBConv& conv = wxConvLibc) const;
+    wxString& Remove(size_t pos, size_t len);

 
     /**
 
     /**

-        Extraction from a stream.
+        Removes the last character.

     */
     */

-    friend istream operator>>(istream& is, wxString& str);
+    wxString& RemoveLast(size_t n = 1);

 
 

-    //@{

     /**
     /**

-        These functions work as C++ stream insertion operators. They insert the
-        given value into the string. Precision and format cannot be set using them.
-        Use Printf() instead.
+        Strip characters at the front and/or end.
+
+        This is the same as Trim() except that it doesn't change this string.
+
+        This is a wxWidgets 1.xx compatibility function; you should not use it in new code.

     */
     */

-    wxString& operator<<(const wxString& s);
-    wxString& operator<<(const char* psz);
-    wxString& operator<<(const wchar_t* pwz);
-    wxString& operator<<(const wxCStrData& psz);
-    wxString& operator<<(char ch);
-    wxString& operator<<(unsigned char ch);
-    wxString& operator<<(wchar_t ch);
-    wxString& operator<<(const wxCharBuffer& s);
-    wxString& operator<<(const wxWCharBuffer& s);
-    wxString& operator<<(wxUniCharRef ch);
-    wxString& operator<<(unsigned int ui);
-    wxString& operator<<(long l);
-    wxString& operator<<(unsigned long ul);
-    wxString& operator<<(wxLongLong_t ll);
-    wxString& operator<<(wxULongLong_t ul);
-    wxString& operator<<(float f);
-    wxString& operator<<(double d);
-    //@}
+    wxString Strip(stripType s = trailing) const;

 
     /**
 
     /**

-        Same as Mid() (substring extraction).
+        Removes white-space (space, tabs, form feed, newline and carriage return) from
+        the left or from the right end of the string (right is default).

     */
     */

-    wxString operator()(size_t start, size_t len) const;
+    wxString& Trim(bool fromRight = true);

 
 

-    //@{

     /**
     /**

-        Concatenation: these operators return a new string equal to the
-        concatenation of the operands.
+        Truncate the string to the given length.

     */
     */

-    wxString operator +(const wxString& x, const wxString& y);
-    wxString operator +(const wxString& x, wxUniChar y);
+    wxString& Truncate(size_t len);
+

     //@}
 
     //@}
 

-    //@{
+
+
+

     /**
     /**

-        Concatenation in place: the argument is appended to the string.
+        @member_group_name{iter, Iterator interface}
+
+        These methods return iterators to the beginnnig or end of the string.
+
+        Please see any STL reference (e.g. http://www.cppreference.com/wiki/string/start)
+        for their documentation.

     */
     */

-    void operator +=(const wxString& str);
-    void operator +=(wxUniChar c);
+    //@{
+
+    const_iterator begin() const;
+    iterator begin();
+    const_iterator end() const;
+    iterator end();
+
+    const_reverse_iterator rbegin() const;
+    reverse_iterator rbegin();
+    const_reverse_iterator rend() const;
+    reverse_iterator rend();
+

     //@}
 
     //@}
 

-    //@{
+
+

     /**
     /**

-        Assignment: the effect of each operation is the same as for the corresponding
-        constructor (see @ref wxString() "wxString constructors").
+        @member_group_name{stl, STL interface}
+
+        The supported STL functions are listed here.
+
+        Please see any STL reference (e.g. http://www.cppreference.com/wiki/string/start)
+        for their documentation.

     */
     */

-    wxString operator =(const wxString& str);
-    wxString operator =(wxUniChar c);
+    //@{
+
+    wxString& append(const wxString& str, size_t pos, size_t n);
+    wxString& append(const wxString& str);
+    wxString& append(const char *sz, size_t n);
+    wxString& append(const wchar_t *sz, size_t n);
+    wxString& append(size_t n, wxUniChar ch);
+    wxString& append(const_iterator first, const_iterator last);
+
+    wxString& assign(const wxString& str, size_t pos, size_t n);
+    wxString& assign(const wxString& str);
+    wxString& assign(const char *sz, size_t n);
+    wxString& assign(const wchar_t *sz, size_t n);
+    wxString& assign(size_t n, wxUniChar ch);
+    wxString& assign(const_iterator first, const_iterator last);
+
+    wxUniChar at(size_t n) const;
+    wxUniCharRef at(size_t n);
+
+    void clear();
+
+    size_type capacity() const;
+
+    int compare(const wxString& str) const;
+    int compare(size_t nStart, size_t nLen, const wxString& str) const;
+    int compare(size_t nStart, size_t nLen,
+            const wxString& str, size_t nStart2, size_t nLen2) const;
+    int compare(size_t nStart, size_t nLen,
+            const char* sz, size_t nCount = npos) const;
+    int compare(size_t nStart, size_t nLen,
+            const wchar_t* sz, size_t nCount = npos) const;
+
+    wxCStrData data() const;
+
+    bool empty() const;
+
+    wxString& erase(size_type pos = 0, size_type n = npos);
+    iterator erase(iterator first, iterator last);
+    iterator erase(iterator first);
+
+    size_t find(const wxString& str, size_t nStart = 0) const;
+    size_t find(const char* sz, size_t nStart = 0, size_t n = npos) const;
+    size_t find(const wchar_t* sz, size_t nStart = 0, size_t n = npos) const;
+    size_t find(wxUniChar ch, size_t nStart = 0) const;
+    size_t find_first_of(const char* sz, size_t nStart = 0) const;
+    size_t find_first_of(const wchar_t* sz, size_t nStart = 0) const;
+    size_t find_first_of(const char* sz, size_t nStart, size_t n) const;
+    size_t find_first_of(const wchar_t* sz, size_t nStart, size_t n) const;
+    size_t find_first_of(wxUniChar c, size_t nStart = 0) const;
+    size_t find_last_of (const wxString& str, size_t nStart = npos) const;
+    size_t find_last_of (const char* sz, size_t nStart = npos) const;
+    size_t find_last_of (const wchar_t* sz, size_t nStart = npos) const;
+    size_t find_last_of(const char* sz, size_t nStart, size_t n) const;
+    size_t find_last_of(const wchar_t* sz, size_t nStart, size_t n) const;
+    size_t find_last_of(wxUniChar c, size_t nStart = npos) const;
+    size_t find_first_not_of(const wxString& str, size_t nStart = 0) const;
+    size_t find_first_not_of(const char* sz, size_t nStart = 0) const;
+    size_t find_first_not_of(const wchar_t* sz, size_t nStart = 0) const;
+    size_t find_first_not_of(const char* sz, size_t nStart, size_t n) const;
+    size_t find_first_not_of(const wchar_t* sz, size_t nStart, size_t n) const;
+    size_t find_first_not_of(wxUniChar ch, size_t nStart = 0) const;
+    size_t find_last_not_of(const wxString& str, size_t nStart = npos) const;
+    size_t find_last_not_of(const char* sz, size_t nStart = npos) const;
+    size_t find_last_not_of(const wchar_t* sz, size_t nStart = npos) const;
+    size_t find_last_not_of(const char* sz, size_t nStart, size_t n) const;
+    size_t find_last_not_of(const wchar_t* sz, size_t nStart, size_t n) const;
+
+    wxString& insert(size_t nPos, const wxString& str);
+    wxString& insert(size_t nPos, const wxString& str, size_t nStart, size_t n);
+    wxString& insert(size_t nPos, const char *sz, size_t n);
+    wxString& insert(size_t nPos, const wchar_t *sz, size_t n);
+    wxString& insert(size_t nPos, size_t n, wxUniChar ch);
+    iterator insert(iterator it, wxUniChar ch);
+    void insert(iterator it, const_iterator first, const_iterator last);
+    void insert(iterator it, size_type n, wxUniChar ch);
+
+    size_t length() const;
+
+    size_type max_size() const;
+
+    void reserve(size_t sz);
+    void resize(size_t nSize, wxUniChar ch = '\0');
+
+    wxString& replace(size_t nStart, size_t nLen, const wxString& str);
+    wxString& replace(size_t nStart, size_t nLen, size_t nCount, wxUniChar ch);
+    wxString& replace(size_t nStart, size_t nLen,
+                        const wxString& str, size_t nStart2, size_t nLen2);
+    wxString& replace(size_t nStart, size_t nLen,
+                        const char* sz, size_t nCount);
+    wxString& replace(size_t nStart, size_t nLen,
+                        const wchar_t* sz, size_t nCount);
+    wxString& replace(size_t nStart, size_t nLen,
+                        const wxString& s, size_t nCount);
+    wxString& replace(iterator first, iterator last, const wxString& s);
+    wxString& replace(iterator first, iterator last, const char* s, size_type n);
+    wxString& replace(iterator first, iterator last, const wchar_t* s, size_type n);
+    wxString& replace(iterator first, iterator last, size_type n, wxUniChar ch);
+    wxString& replace(iterator first, iterator last,
+                        const_iterator first1, const_iterator last1);
+    wxString& replace(iterator first, iterator last,
+                        const char *first1, const char *last1);
+    wxString& replace(iterator first, iterator last,
+                        const wchar_t *first1, const wchar_t *last1);
+
+    size_t rfind(const wxString& str, size_t nStart = npos) const;
+    size_t rfind(const char* sz, size_t nStart = npos, size_t n = npos) const;
+    size_t rfind(const wchar_t* sz, size_t nStart = npos, size_t n = npos) const;
+    size_t rfind(wxUniChar ch, size_t nStart = npos) const;
+
+    size_type size() const;
+    wxString substr(size_t nStart = 0, size_t nLen = npos) const;
+    void swap(wxString& str);
+

     //@}
 
     //@}
 

-    //@{
+
+
+    // STATIC FUNCTIONS
+    // Keep these functions separed from the other groups or Doxygen gets confused
+    // -----------------------------------------------------------------------------
+

     /**
     /**

-        Element extraction.
+        An 'invalid' value for string index

     */
     */

-    wxUniChar operator [](size_t i) const;
-    wxUniCharRef operator [](size_t i);
-    //@}
+    static const size_t npos;

 
     /**
 
     /**

-        Empty string is @false, so !string will only return @true if the
-        string is empty.
+        This static function returns the string containing the result of calling
+        Printf() with the passed parameters on it.

 
 

-        See also IsEmpty().
+        @see FormatV(), Printf()

     */
     */

-    bool operator!() const;
-
+    static wxString Format(const wxString& format, ...);

 
 

-    //@{

     /**
     /**

-        Converts the strings contents to UTF-8 and returns it either as a
-        temporary wxCharBuffer object or as a pointer to the internal
-        string contents in UTF-8 build.
+        This static function returns the string containing the result of calling
+        PrintfV() with the passed parameters on it.

 
 

-        @see wc_str(), c_str(), mb_str()
+        @see Format(), PrintfV()

     */
     */

-    const char* utf8_str() const;
-    const wxCharBuffer utf8_str() const;
-    //@}
+    static wxString FormatV(const wxString& format, va_list argptr);

 
     //@{
     /**
 
     //@{
     /**

-        Converts the strings contents to the wide character represention
-        and returns it as a temporary wxWCharBuffer object (Unix and OS X)
-        or returns a pointer to the internal string contents in wide character
-        mode (Windows).
+        Converts given buffer of binary data from 8-bit string to wxString. In
+        Unicode build, the string is interpreted as being in ISO-8859-1
+        encoding. The version without @e len parameter takes NUL-terminated
+        data.

 
 

-        The macro wxWX2WCbuf is defined as the correct return
-        type (without const).
+        This is a convenience method useful when storing binary data in
+        wxString. It should be used @em only for that purpose and only in
+        conjunction with To8BitData(). Use mb_str() for conversion of character
+        data to known encoding.

 
 

-        @see utf8_str(), c_str(), mb_str(), fn_str(), wchar_str()
+        @since 2.8.4
+
+        @see wxString::To8BitData()

     */
     */

-    const wchar_t* wc_str() const;
-    const wxWCharBuffer wc_str() const;
+    static wxString From8BitData(const char* buf, size_t len);
+    static wxString From8BitData(const char* buf);

     //@}
 
     //@}
 

+    //@{

     /**
     /**

-        Returns an object with string data that is implicitly convertible to
-        @c char* pointer. Note that changes to the returned buffer may or may
-        not be lost (depending on the build) and so this function is only usable for
-        passing strings to legacy libraries that don't have const-correct API. Use
-        wxStringBuffer if you want to modify the string.
-
-        @see mb_str(), wc_str(), fn_str(), c_str(), char_str()
+        Converts the string or character from an ASCII, 7-bit form
+        to the native wxString representation.

     */
     */

-    wxWritableWCharBuffer wchar_str() const;
+    static wxString FromAscii(const char* s);
+    static wxString FromAscii(const unsigned char* s);
+    static wxString FromAscii(const char* s, size_t len);
+    static wxString FromAscii(const unsigned char* s, size_t len);
+    static wxString FromAscii(char c);
+    //@}

 
 

+    //@{

     /**
     /**

-       Explicit conversion to C string in the internal representation (either
-       wchar_t* or UTF-8-encoded char*, depending on the build).
-    */
-    const wxStringCharType *wx_str() const;
+        Converts C string encoded in UTF-8 to wxString.

 
 

+        If @a s is not a valid UTF-8 string, an empty string is returned.

 
 

-    /**
-        @name Iterator interface
+        Notice that when using UTF-8 wxWidgets build there is a more efficient
+        alternative to this function called FromUTF8Unchecked() which, unlike
+        this one, doesn't check that the input string is valid.

 
 

-        These methods return iterators to the beginnnig or
-        end of the string.
+        @since 2.8.4

     */
     */

-    //@{
-        const_iterator begin() const;
-        iterator begin();
-        const_iterator end() const;
-        iterator end();
-
-        const_reverse_iterator rbegin() const;
-        reverse_iterator rbegin();
-        const_reverse_iterator rend() const;
-        reverse_iterator rend();
+    static wxString FromUTF8(const char* s);
+    static wxString FromUTF8(const char* s, size_t len);

     //@}
 
     //@}
 

+    //@{

     /**
     /**

-        @name STL interface
+        Converts C string encoded in UTF-8 to wxString without checking its
+        validity.
+
+        This method assumes that @a s is a valid UTF-8 sequence and doesn't do
+        any validation (although an assert failure is triggered in debug builds
+        if the string is invalid). Only use it if you are absolutely sure that
+        @a s is a correct UTF-8 string (e.g. because it comes from another
+        library using UTF-8) and if the performance matters, otherwise use
+        slower (in UTF-8 build) but safer FromUTF8(). Passing a bad UTF-8
+        string to this function will result in creating a corrupted wxString
+        and all the subsequent operations on it will be undefined.

 
 

-        The supported STL functions are listed here. Please see any
-        STL reference for their documentation.
+        @since 2.8.9

     */
     */

-    //@{
-        wxString& append(const wxString& str, size_t pos, size_t n);
-        wxString& append(const wxString& str);
-        wxString& append(const char *sz, size_t n);
-        wxString& append(const wchar_t *sz, size_t n);
-        wxString& append(size_t n, wxUniChar ch);
-        wxString& append(const_iterator first, const_iterator last);
-
-        wxString& assign(const wxString& str, size_t pos, size_t n);
-        wxString& assign(const wxString& str);
-        wxString& assign(const char *sz, size_t n);
-        wxString& assign(const wchar_t *sz, size_t n);
-        wxString& assign(size_t n, wxUniChar ch);
-        wxString& assign(const_iterator first, const_iterator last);
-
-        wxUniChar at(size_t n) const;
-        wxUniCharRef at(size_t n);
-
-        void clear();
-
-        size_type capacity() const;
-
-        int compare(const wxString& str) const;
-        int compare(size_t nStart, size_t nLen, const wxString& str) const;
-        int compare(size_t nStart, size_t nLen,
-              const wxString& str, size_t nStart2, size_t nLen2) const;
-        int compare(size_t nStart, size_t nLen,
-              const char* sz, size_t nCount = npos) const;
-        int compare(size_t nStart, size_t nLen,
-              const wchar_t* sz, size_t nCount = npos) const;
-
-        wxCStrData data() const;
-
-        bool empty() const;
-
-        wxString& erase(size_type pos = 0, size_type n = npos);
-        iterator erase(iterator first, iterator last);
-        iterator erase(iterator first);
-
-        size_t find(const wxString& str, size_t nStart = 0) const;
-        size_t find(const char* sz, size_t nStart = 0, size_t n = npos) const;
-        size_t find(const wchar_t* sz, size_t nStart = 0, size_t n = npos) const;
-        size_t find(wxUniChar ch, size_t nStart = 0) const;
-        size_t find_first_of(const char* sz, size_t nStart = 0) const;
-        size_t find_first_of(const wchar_t* sz, size_t nStart = 0) const;
-        size_t find_first_of(const char* sz, size_t nStart, size_t n) const;
-        size_t find_first_of(const wchar_t* sz, size_t nStart, size_t n) const;
-        size_t find_first_of(wxUniChar c, size_t nStart = 0) const;
-        size_t find_last_of (const wxString& str, size_t nStart = npos) const;
-        size_t find_last_of (const char* sz, size_t nStart = npos) const;
-        size_t find_last_of (const wchar_t* sz, size_t nStart = npos) const;
-        size_t find_last_of(const char* sz, size_t nStart, size_t n) const;
-        size_t find_last_of(const wchar_t* sz, size_t nStart, size_t n) const;
-        size_t find_last_of(wxUniChar c, size_t nStart = npos) const;
-        size_t find_first_not_of(const wxString& str, size_t nStart = 0) const;
-        size_t find_first_not_of(const char* sz, size_t nStart = 0) const;
-        size_t find_first_not_of(const wchar_t* sz, size_t nStart = 0) const;
-        size_t find_first_not_of(const char* sz, size_t nStart, size_t n) const;
-        size_t find_first_not_of(const wchar_t* sz, size_t nStart, size_t n) const;
-        size_t find_first_not_of(wxUniChar ch, size_t nStart = 0) const;
-        size_t find_last_not_of(const wxString& str, size_t nStart = npos) const;
-        size_t find_last_not_of(const char* sz, size_t nStart = npos) const;
-        size_t find_last_not_of(const wchar_t* sz, size_t nStart = npos) const;
-        size_t find_last_not_of(const char* sz, size_t nStart, size_t n) const;
-        size_t find_last_not_of(const wchar_t* sz, size_t nStart, size_t n) const;
-
-        wxString& insert(size_t nPos, const wxString& str);
-        wxString& insert(size_t nPos, const wxString& str, size_t nStart, size_t n);
-        wxString& insert(size_t nPos, const char *sz, size_t n);
-        wxString& insert(size_t nPos, const wchar_t *sz, size_t n);
-        wxString& insert(size_t nPos, size_t n, wxUniChar ch);
-        iterator insert(iterator it, wxUniChar ch);
-        void insert(iterator it, const_iterator first, const_iterator last);
-        void insert(iterator it, size_type n, wxUniChar ch);
-
-        size_t length() const;
-
-        size_type max_size() const;
-
-        void reserve(size_t sz);
-        void resize(size_t nSize, wxUniChar ch = '\0');
-
-        wxString& replace(size_t nStart, size_t nLen, const wxString& str);
-        wxString& replace(size_t nStart, size_t nLen, size_t nCount, wxUniChar ch);
-        wxString& replace(size_t nStart, size_t nLen,
-                          const wxString& str, size_t nStart2, size_t nLen2);
-        wxString& replace(size_t nStart, size_t nLen,
-                          const char* sz, size_t nCount);
-        wxString& replace(size_t nStart, size_t nLen,
-                          const wchar_t* sz, size_t nCount);
-        wxString& replace(size_t nStart, size_t nLen,
-                          const wxString& s, size_t nCount);
-        wxString& replace(iterator first, iterator last, const wxString& s);
-        wxString& replace(iterator first, iterator last, const char* s, size_type n);
-        wxString& replace(iterator first, iterator last, const wchar_t* s, size_type n);
-        wxString& replace(iterator first, iterator last, size_type n, wxUniChar ch);
-        wxString& replace(iterator first, iterator last,
-                          const_iterator first1, const_iterator last1);
-        wxString& replace(iterator first, iterator last,
-                          const char *first1, const char *last1);
-        wxString& replace(iterator first, iterator last,
-                          const wchar_t *first1, const wchar_t *last1);
-
-        size_t rfind(const wxString& str, size_t nStart = npos) const;
-        size_t rfind(const char* sz, size_t nStart = npos, size_t n = npos) const;
-        size_t rfind(const wchar_t* sz, size_t nStart = npos, size_t n = npos) const;
-        size_t rfind(wxUniChar ch, size_t nStart = npos) const;
-
-        size_type size() const;
-        wxString substr(size_t nStart = 0, size_t nLen = npos) const;
-        void swap(wxString& str);
+    static wxString FromUTF8Unchecked(const char* s);
+    static wxString FromUTF8Unchecked(const char* s, size_t len);

     //@}
 };
 
     //@}
 };
 

-/** @addtogroup group_string_operators */
+
+

 //@{
 /**
 //@{
 /**

-    Comparison operators for wxString.
+    Comparison operator for string types.

 */
 inline bool operator==(const wxString& s1, const wxString& s2);
 inline bool operator!=(const wxString& s1, const wxString& s2);
 */
 inline bool operator==(const wxString& s1, const wxString& s2);
 inline bool operator!=(const wxString& s1, const wxString& s2);


@@ -1369,13 +1524,11 @@ inline bool operator==(const wxString& s1, const wxCharBuffer& s2);
 inline bool operator==(const wxCharBuffer& s1, const wxString& s2);
 inline bool operator!=(const wxString& s1, const wxCharBuffer& s2);
 inline bool operator!=(const wxCharBuffer& s1, const wxString& s2);
 inline bool operator==(const wxCharBuffer& s1, const wxString& s2);
 inline bool operator!=(const wxString& s1, const wxCharBuffer& s2);
 inline bool operator!=(const wxCharBuffer& s1, const wxString& s2);

-inline wxString operator+(const wxString& string, const wxWCharBuffer& buf)
-inline wxString operator+(const wxWCharBuffer& buf, const wxString& string)
-inline wxString operator+(const wxString& string, const wxCharBuffer& buf)
-inline wxString operator+(const wxCharBuffer& buf, const wxString& string)
+//@}

 
 

+//@{

 /**
 /**

-    Comparison operators with wxUniChar or wxUniCharRef.
+    Comparison operators char types.

 */
 inline bool operator==(const wxUniChar& c, const wxString& s);
 inline bool operator==(const wxUniCharRef& c, const wxString& s);
 */
 inline bool operator==(const wxUniChar& c, const wxString& s);
 inline bool operator==(const wxUniCharRef& c, const wxString& s);


@@ -1405,7 +1558,6 @@ wxString wxEmptyString;
 
 
 
 
 
 

-

 /**
     @class wxStringBufferLength
 
 /**
     @class wxStringBufferLength
 


@@ -1420,16 +1572,13 @@ wxString wxEmptyString;
 
     @code
         wxString theAnswer;
 
     @code
         wxString theAnswer;

-        wxStringBuffer theAnswerBuffer(theAnswer, 1024);
+        wxStringBufferLength theAnswerBuffer(theAnswer, 1024);

         int nLength = GetMeaningOfLifeAsString(theAnswerBuffer);
         theAnswerBuffer.SetLength(nLength);
         if ( theAnswer != "42" )
             wxLogError("Something is very wrong!");
     @endcode
 
         int nLength = GetMeaningOfLifeAsString(theAnswerBuffer);
         theAnswerBuffer.SetLength(nLength);
         if ( theAnswer != "42" )
             wxLogError("Something is very wrong!");
     @endcode
 

-    @todo
-        the example above does not make use of wxStringBufferLength??
-

     Note that the exact usage of this depends on whether or not wxUSE_STL is
     enabled. If wxUSE_STL is enabled, wxStringBuffer creates a separate empty
     character buffer, and if wxUSE_STL is disabled, it uses GetWriteBuf() from
     Note that the exact usage of this depends on whether or not wxUSE_STL is
     enabled. If wxUSE_STL is enabled, wxStringBuffer creates a separate empty
     character buffer, and if wxUSE_STL is disabled, it uses GetWriteBuf() from


@@ -1528,3 +1677,29 @@ public:
     */
     wxStringCharType* operator wxStringCharType *();
 };
     */
     wxStringCharType* operator wxStringCharType *();
 };

+
+
+/** @addtogroup group_funcmacro_string */
+//@{
+
+/**
+    Allows to extend a function with the signature:
+    @code bool SomeFunc(const wxUniChar& c) @endcode
+    which operates on a single character, to an entire wxString.
+
+    E.g. if you want to check if an entire string contains only digits,
+    you can do:
+    @code
+        if (wxStringCheck<wxIsdigit>(myString))
+            ... // the entire string contains oly digits!
+        else
+            ... // at least one character of myString is not a digit
+    @endcode
+
+    @return @true if the given function returns a non-zero value for all
+            characters of the @a val string.
+*/
+template<bool (T)(const wxUniChar& c)>
+    inline bool wxStringCheck(const wxString& val);
+
+//@}