\setheader{{\it CHAPTER \thechapter}}{}{}{}{}{{\it CHAPTER \thechapter}}%
\setfooter{\thepage}{}{}{}{}{\thepage}
-The functions and macros defined in wxWindows are described here.
+The functions and macros defined in wxWindows are described here: you can
+either look up a function using the alphabetical listing of them or find it in
+the corresponding topic.
+
+
+
+\section{Alphabetical functions and macros list}
+
+\helpref{CLASSINFO}{classinfo}\\
+\helpref{copystring}{copystring}\\
+\helpref{DECLARE\_ABSTRACT\_CLASS}{declareabstractclass}\\
+\helpref{DECLARE\_APP}{declareapp}\\
+\helpref{DECLARE\_CLASS}{declareclass}\\
+\helpref{DECLARE\_DYNAMIC\_CLASS}{declaredynamicclass}\\
+\helpref{IMPLEMENT\_ABSTRACT\_CLASS2}{implementabstractclass2}\\
+\helpref{IMPLEMENT\_ABSTRACT\_CLASS}{implementabstractclass}\\
+\helpref{IMPLEMENT\_APP}{implementapp}\\
+\helpref{IMPLEMENT\_CLASS2}{implementclass2}\\
+\helpref{IMPLEMENT\_CLASS}{implementclass}\\
+\helpref{IMPLEMENT\_DYNAMIC\_CLASS2}{implementdynamicclass2}\\
+\helpref{IMPLEMENT\_DYNAMIC\_CLASS}{implementdynamicclass}\\
+\helpref{ngettext}{ngettext}\\
+\helpref{wxCONCAT}{wxconcat}\\
+\helpref{WXDEBUG\_NEW}{debugnew}\\
+\helpref{WXTRACELEVEL}{tracelevel}\\
+\helpref{WXTRACE}{trace}\\
+\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}\\
+\helpref{wxASSERT\_MSG}{wxassertmsg}\\
+\helpref{wxASSERT}{wxassert}\\
+\helpref{wxBITMAP}{wxbitmapmacro}\\
+\helpref{wxBeginBusyCursor}{wxbeginbusycursor}\\
+\helpref{wxBell}{wxbell}\\
+\helpref{wxCHECK}{wxcheck}\\
+\helpref{wxCHECK2\_MSG}{wxcheck2msg}\\
+\helpref{wxCHECK2}{wxcheck2}\\
+\helpref{wxCHECK\_GCC\_VERSION}{wxcheckgccversion}\\
+\helpref{wxCHECK\_MSG}{wxcheckmsg}\\
+\helpref{wxCHECK\_RET}{wxcheckret}\\
+\helpref{wxCHECK\_VERSION}{wxcheckversion}\\
+\helpref{wxCHECK\_W32API\_VERSION}{wxcheckw32apiversion}\\
+\helpref{wxClientDisplayRect}{wxclientdisplayrect}\\
+\helpref{wxClipboardOpen}{functionwxclipboardopen}\\
+\helpref{wxCloseClipboard}{wxcloseclipboard}\\
+\helpref{wxColourDisplay}{wxcolourdisplay}\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}\\
+\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2}\\
+\helpref{wxConcatFiles}{wxconcatfiles}\\
+\helpref{wxConstCast}{wxconstcast}\\
+\helpref{wxCopyFile}{wxcopyfile}\\
+\helpref{wxCreateDynamicObject}{wxcreatedynamicobject}\\
+\helpref{wxCreateFileTipProvider}{wxcreatefiletipprovider}\\
+\helpref{wxCRIT\_SECT\_DECLARE}{wxcritsectdeclare}\\
+\helpref{wxCRIT\_SECT\_DECLARE\_MEMBER}{wxcritsectdeclaremember}\\
+\helpref{wxCRIT\_SECT\_LOCKER}{wxcritsectlocker}\\
+\helpref{wxCRITICAL\_SECTION}{wxcriticalsectionmacro}\\ % wxcs already taken!
+\helpref{wxDDECleanUp}{wxddecleanup}\\
+\helpref{wxDDEInitialize}{wxddeinitialize}\\
+\helpref{wxDROP\_ICON}{wxdropicon}\\
+\helpref{wxDebugMsg}{wxdebugmsg}\\
+\helpref{wxDirExists}{functionwxdirexists}\\
+\helpref{wxDirSelector}{wxdirselector}\\
+\helpref{wxDisplayDepth}{wxdisplaydepth}\\
+\helpref{wxDisplaySize}{wxdisplaysize}\\
+\helpref{wxDisplaySizeMM}{wxdisplaysizemm}\\
+\helpref{wxDos2UnixFilename}{wxdos2unixfilename}\\
+\helpref{wxDynamicCastThis}{wxdynamiccastthis}\\
+\helpref{wxDynamicCast}{wxdynamiccast}\\
+\helpref{wxDYNLIB\_FUNCTION}{wxdynlibfunction}\\
+\helpref{wxEmptyClipboard}{wxemptyclipboard}\\
+\helpref{wxEnableTopLevelWindows}{wxenabletoplevelwindows}\\
+\helpref{wxEndBusyCursor}{wxendbusycursor}\\
+\helpref{wxENTER\_CRIT\_SECT}{wxentercritsect}\\
+\helpref{wxEntry}{wxentry}\\
+\helpref{wxEnumClipboardFormats}{wxenumclipboardformats}\\
+\helpref{wxError}{wxerror}\\
+\helpref{wxExecute}{wxexecute}\\
+\helpref{wxExit}{wxexit}\\
+\helpref{wxEXPLICIT}{wxexplicit}\\
+\helpref{wxFAIL\_MSG}{wxfailmsg}\\
+\helpref{wxFAIL}{wxfail}\\
+\helpref{wxFatalError}{wxfatalerror}\\
+\helpref{wxFileExists}{functionwxfileexists}\\
+\helpref{wxFileModificationTime}{wxfilemodificationtime}\\
+\helpref{wxFileNameFromPath}{wxfilenamefrompath}\\
+\helpref{wxFileSelector}{wxfileselector}\\
+\helpref{wxFindFirstFile}{wxfindfirstfile}\\
+\helpref{wxFindMenuItemId}{wxfindmenuitemid}\\
+\helpref{wxFindNextFile}{wxfindnextfile}\\
+\helpref{wxFindWindowAtPointer}{wxfindwindowatpointer}\\
+\helpref{wxFindWindowAtPoint}{wxfindwindowatpoint}\\
+\helpref{wxFindWindowByLabel}{wxfindwindowbylabel}\\
+\helpref{wxFindWindowByName}{wxfindwindowbyname}\\
+\helpref{wxFinite}{wxfinite}\\
+\helpref{wxGetActiveWindow}{wxgetactivewindow}\\
+\helpref{wxGetApp}{wxgetapp}\\
+\helpref{wxGetClipboardData}{wxgetclipboarddata}\\
+\helpref{wxGetClipboardFormatName}{wxgetclipboardformatname}\\
+\helpref{wxGetColourFromUser}{wxgetcolourfromuser}\\
+\helpref{wxGetCwd}{wxgetcwd}\\
+\helpref{wxGetDiskSpace}{wxgetdiskspace}\\
+\helpref{wxGetDisplayName}{wxgetdisplayname}\\
+\helpref{wxGetElapsedTime}{wxgetelapsedtime}\\
+\helpref{wxGetEmailAddress}{wxgetemailaddress}\\
+\helpref{wxGetEnv}{wxgetenv}\\
+\helpref{wxGetFontFromUser}{wxgetfontfromuser}\\
+\helpref{wxGetFreeMemory}{wxgetfreememory}\\
+\helpref{wxGetFullHostName}{wxgetfullhostname}\\
+\helpref{wxGetHomeDir}{wxgethomedir}\\
+\helpref{wxGetHostName}{wxgethostname}\\
+\helpref{wxGetLocalTimeMillis}{wxgetlocaltimemillis}\\
+\helpref{wxGetLocalTime}{wxgetlocaltime}\\
+\helpref{wxGetMousePosition}{wxgetmouseposition}\\
+\helpref{wxGetMultipleChoices}{wxgetmultiplechoices}\\
+\helpref{wxGetMultipleChoice}{wxgetmultiplechoice}\\
+\helpref{wxGetNumberFromUser}{wxgetnumberfromuser}\\
+\helpref{wxGetOSDirectory}{wxgetosdirectory}\\
+\helpref{wxGetOsDescription}{wxgetosdescription}\\
+\helpref{wxGetOsVersion}{wxgetosversion}\\
+\helpref{wxGetPasswordFromUser}{wxgetpasswordfromuser}\\
+\helpref{wxGetPrinterCommand}{wxgetprintercommand}\\
+\helpref{wxGetPrinterFile}{wxgetprinterfile}\\
+\helpref{wxGetPrinterMode}{wxgetprintermode}\\
+\helpref{wxGetPrinterOptions}{wxgetprinteroptions}\\
+\helpref{wxGetPrinterOrientation}{wxgetprinterorientation}\\
+\helpref{wxGetPrinterPreviewCommand}{wxgetprinterpreviewcommand}\\
+\helpref{wxGetPrinterScaling}{wxgetprinterscaling}\\
+\helpref{wxGetPrinterTranslation}{wxgetprintertranslation}\\
+\helpref{wxGetProcessId}{wxgetprocessid}\\
+\helpref{wxGetResource}{wxgetresource}\\
+\helpref{wxGetSingleChoiceData}{wxgetsinglechoicedata}\\
+\helpref{wxGetSingleChoiceIndex}{wxgetsinglechoiceindex}\\
+\helpref{wxGetSingleChoice}{wxgetsinglechoice}\\
+\helpref{wxGetTempFileName}{wxgettempfilename}\\
+\helpref{wxGetTextFromUser}{wxgettextfromuser}\\
+\helpref{wxGetTopLevelParent}{wxgettoplevelparent}\\
+\helpref{wxGetTranslation}{wxgettranslation}\\
+\helpref{wxGetUTCTime}{wxgetutctime}\\
+\helpref{wxGetUserHome}{wxgetuserhome}\\
+\helpref{wxGetUserId}{wxgetuserid}\\
+\helpref{wxGetUserName}{wxgetusername}\\
+\helpref{wxGetWorkingDirectory}{wxgetworkingdirectory}\\
+\helpref{wxGetenv}{wxgetenvmacro}\\
+\helpref{wxHandleFatalExceptions}{wxhandlefatalexceptions}\\
+\helpref{wxICON}{wxiconmacro}\\
+\helpref{wxINTXX\_SWAP\_ALWAYS}{intswapalways}\\
+\helpref{wxINTXX\_SWAP\_ON\_BE}{intswaponbe}\\
+\helpref{wxINTXX\_SWAP\_ON\_LE}{intswaponle}\\
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}\\
+\helpref{wxInitialize}{wxinitialize}\\
+\helpref{wxIsAbsolutePath}{wxisabsolutepath}\\
+\helpref{wxIsBusy}{wxisbusy}\\
+\helpref{wxIsClipboardFormatAvailable}{wxisclipboardformatavailable}\\
+\helpref{wxIsDebuggerRunning}{wxisdebuggerrunning}\\
+\helpref{wxIsEmpty}{wxisempty}\\
+\helpref{wxIsMainThread}{wxismainthread}\\
+\helpref{wxIsNaN}{wxisnan}\\
+\helpref{wxIsWild}{wxiswild}\\
+\helpref{wxKill}{wxkill}\\
+\helpref{wxLEAVE\_CRIT\_SECT}{wxleavecritsect}\\
+\helpref{wxLoadUserResource}{wxloaduserresource}\\
+\helpref{wxLogDebug}{wxlogdebug}\\
+\helpref{wxLogError}{wxlogerror}\\
+\helpref{wxLogFatalError}{wxlogfatalerror}\\
+\helpref{wxLogMessage}{wxlogmessage}\\
+\helpref{wxLogStatus}{wxlogstatus}\\
+\helpref{wxLogSysError}{wxlogsyserror}\\
+\helpref{wxLogTrace}{wxlogtrace}\\
+\helpref{wxLogVerbose}{wxlogverbose}\\
+\helpref{wxLogWarning}{wxlogwarning}\\
+\helpref{wxLL}{wxll}\\
+\helpref{wxLongLongFmtSpec}{wxlonglongfmtspec}\\
+\helpref{wxMakeMetafilePlaceable}{wxmakemetafileplaceable}\\
+\helpref{wxMatchWild}{wxmatchwild}\\
+\helpref{wxMessageBox}{wxmessagebox}\\
+\helpref{wxMkdir}{wxmkdir}\\
+\helpref{wxMutexGuiEnter}{wxmutexguienter}\\
+\helpref{wxMutexGuiLeave}{wxmutexguileave}\\
+\helpref{wxNewId}{wxnewid}\\
+\helpref{wxNow}{wxnow}\\
+\helpref{wxOnAssert}{wxonassert}\\
+\helpref{wxOpenClipboard}{wxopenclipboard}\\
+\helpref{wxPathOnly}{wxpathonly}\\
+\helpref{wxPostDelete}{wxpostdelete}\\
+\helpref{wxPostEvent}{wxpostevent}\\
+\helpref{wxRegisterClipboardFormat}{wxregisterclipboardformat}\\
+\helpref{wxRegisterId}{wxregisterid}\\
+\helpref{wxRemoveFile}{wxremovefile}\\
+\helpref{wxRenameFile}{wxrenamefile}\\
+\helpref{wxRmdir}{wxrmdir}\\
+\helpref{wxSafeShowMessage}{wxsafeshowmessage}\\
+\helpref{wxSafeYield}{wxsafeyield}\\
+\helpref{wxSetClipboardData}{wxsetclipboarddata}\\
+\helpref{wxSetCursor}{wxsetcursor}\\
+\helpref{wxSetDisplayName}{wxsetdisplayname}\\
+\helpref{wxSetEnv}{wxsetenv}\\
+\helpref{wxSetPrinterCommand}{wxsetprintercommand}\\
+\helpref{wxSetPrinterFile}{wxsetprinterfile}\\
+\helpref{wxSetPrinterMode}{wxsetprintermode}\\
+\helpref{wxSetPrinterOptions}{wxsetprinteroptions}\\
+\helpref{wxSetPrinterOrientation}{wxsetprinterorientation}\\
+\helpref{wxSetPrinterPreviewCommand}{wxsetprinterpreviewcommand}\\
+\helpref{wxSetPrinterScaling}{wxsetprinterscaling}\\
+\helpref{wxSetPrinterTranslation}{wxsetprintertranslation}\\
+\helpref{wxSetWorkingDirectory}{wxsetworkingdirectory}\\
+\helpref{wxShell}{wxshell}\\
+\helpref{wxShowTip}{wxshowtip}\\
+\helpref{wxShutdown}{wxshutdown}\\
+\helpref{wxSleep}{wxsleep}\\
+\helpref{wxSnprintf}{wxsnprintf}\\
+\helpref{wxSplitPath}{wxsplitfunction}\\
+\helpref{wxStartTimer}{wxstarttimer}\\
+\helpref{wxStaticCast}{wxstaticcast}\\
+\helpref{wxStrcmp}{wxstrcmp}\\
+\helpref{wxStricmp}{wxstricmp}\\
+\helpref{wxStringEq}{wxstringeq}\\
+\helpref{wxStringMatch}{wxstringmatch}\\
+\helpref{wxStripMenuCodes}{wxstripmenucodes}\\
+\helpref{wxStrlen}{wxstrlen}\\
+\helpref{wxSysErrorCode}{wxsyserrorcode}\\
+\helpref{wxSysErrorMsg}{wxsyserrormsg}\\
+\helpref{wxT}{wxt}\\
+\helpref{wxTraceLevel}{wxtracelevel}\\
+\helpref{wxTrace}{wxtrace}\\
+\helpref{wxTransferFileToStream}{wxtransferfiletostream}\\
+\helpref{wxTransferStreamToFile}{wxtransferstreamtofile}\\
+\helpref{wxTrap}{wxtrap}\\
+\helpref{wxULL}{wxull}\\
+\helpref{wxUninitialize}{wxuninitialize}\\
+\helpref{wxUnix2DosFilename}{wxunix2dosfilename}\\
+\helpref{wxUnsetEnv}{wxunsetenv}\\
+\helpref{wxUsleep}{wxusleep}\\
+\helpref{wxVsnprintf}{wxvsnprintf}\\
+\helpref{wxWakeUpIdle}{wxwakeupidle}\\
+\helpref{wxWriteResource}{wxwriteresource}\\
+\helpref{wxYield}{wxyield}\\
+\helpref{\_}{underscore}\\
+\helpref{\_T}{underscoret}
+
+
\section{Version macros}\label{versionfunctions}
\begin{itemize}\itemsep=0pt
\item {\tt wxMAJOR\_VERSION} is the major version of wxWindows
\item {\tt wxMINOR\_VERSION} is the minor version of wxWindows
-\item {\tt wxRELASE\_NUMBER} is the release number
+\item {\tt wxRELEASE\_NUMBER} is the release number
\end{itemize}
For example, the values or these constants for wxWindows 2.1.15 are 2, 1 and
<wx/version.h> or <wx/defs.h>
+
\membersection{wxCHECK\_VERSION}\label{wxcheckversion}
\func{bool}{wxCHECK\_VERSION}{\param{}{major, minor, release}}
}
\end{verbatim}
+
+\membersection{wxCHECK\_GCC\_VERSION}\label{wxcheckgccversion}
+
+\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+
+Returns $1$ if the compiler being used to compile the code is GNU C++
+compiler (g++) version major.minor.release or greater. Otherwise, and also if
+the compiler is not GNU C++ at all, returns $0$.
+
+
+\membersection{wxCHECK\_W32API\_VERSION}\label{wxcheckw32apiversion}
+
+\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+
+Returns $1$ if the version of w32api headers used is major.minor.release or
+greater. Otherwise, and also if we are not compiling with mingw32/cygwin under
+Win32 at all, returns $0$.
+
+
+
+\section{Application initialization and termination}\label{appinifunctions}
+
+The functions in this section are used on application startup/shutdown and also
+to control the behaviour of the main event loop of the GUI programs.
+
+
+\membersection{::wxEntry}\label{wxentry}
+
+This initializes wxWindows in a platform-dependent way. Use this if you
+are not using the default wxWindows entry code (e.g. main or WinMain). For example,
+you can initialize wxWindows from an Microsoft Foundation Classes application using
+this function.
+
+\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
+ \param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = true}}
+
+wxWindows initialization under Windows (non-DLL). If {\it enterLoop} is false, the
+function will return immediately after calling wxApp::OnInit. Otherwise, the wxWindows
+message loop will be entered.
+
+\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
+ \param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
+
+wxWindows initialization under Windows (for applications constructed as a DLL).
+
+\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
+
+wxWindows initialization under Unix.
+
+\wxheading{Remarks}
+
+To clean up wxWindows, call wxApp::OnExit followed by the static function
+wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWindows:
+
+\begin{verbatim}
+int CTheApp::ExitInstance()
+{
+ // OnExit isn't called by CleanUp so must be called explicitly.
+ wxTheApp->OnExit();
+ wxApp::CleanUp();
+
+ return CWinApp::ExitInstance();
+}
+\end{verbatim}
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+
+
+\membersection{::wxGetApp}\label{wxgetapp}
+
+\func{wxAppDerivedClass\&}{wxGetApp}{\void}
+
+This function doesn't exist in wxWindows but it is created by using
+the \helpref{IMPLEMENT\_APP}{implementapp} macro. Thus, before using it
+anywhere but in the same module where this macro is used, you must make it
+available using \helpref{DECLARE\_APP}{declareapp}.
+
+The advantage of using this function compared to directly using the global
+wxTheApp pointer is that the latter is of type {\tt wxApp *} and so wouldn't
+allow you to access the functions specific to your application class but not
+present in wxApp while wxGetApp() returns the object of the right type.
+
+
+\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
+
+\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = true}}
+
+If {\it doIt} is true, the fatal exceptions (also known as general protection
+faults under Windows or segmentation violations in the Unix world) will be
+caught and passed to \helpref{wxApp::OnFatalException}{wxapponfatalexception}.
+By default, i.e. before this function is called, they will be handled in the
+normal way which usually just means that the application will be terminated.
+Calling wxHandleFatalExceptions() with {\it doIt} equal to false will restore
+this default behaviour.
+
+
+\membersection{::wxInitAllImageHandlers}\label{wxinitallimagehandlers}
+
+\func{void}{wxInitAllImageHandlers}{\void}
+
+Initializes all available image handlers. For a list of available handlers,
+see \helpref{wxImage}{wximage}.
+
+\wxheading{See also}
+
+\helpref{wxImage}{wximage}, \helpref{wxImageHandler}{wximagehandler}
+
+\wxheading{Include files}
+
+<wx/image.h>
+
+
+\membersection{::wxInitialize}\label{wxinitialize}
+
+\func{bool}{wxInitialize}{\void}
+
+This function is used in wxBase only and only if you don't create
+\helpref{wxApp}{wxapp} object at all. In this case you must call it from your
+{\tt main()} function before calling any other wxWindows functions.
+
+If the function returns {\tt false} the initialization could not be performed,
+in this case the library cannot be used and
+\helpref{wxUninitialize}{wxuninitialize} shouldn't be called neither.
+
+This function may be called several times but
+\helpref{wxUninitialize}{wxuninitialize} must be called for each successful
+call to this function.
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+
+\membersection{::wxSafeYield}\label{wxsafeyield}
+
+\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}, \param{bool}{
+ onlyIfNeeded = false}}
+
+This function is similar to wxYield, except that it disables the user input to
+all program windows before calling wxYield and re-enables it again
+afterwards. If {\it win} is not NULL, this window will remain enabled,
+allowing the implementation of some limited user interaction.
+
+Returns the result of the call to \helpref{::wxYield}{wxyield}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxUninitialize}\label{wxuninitialize}
+
+\func{void}{wxUninitialize}{\void}
+
+This function is for use in console (wxBase) programs only. It must be called
+once for each previous successful call to \helpref{wxInitialize}{wxinitialize}.
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+
+\membersection{::wxYield}\label{wxyield}
+
+\func{bool}{wxYield}{\void}
+
+Calls \helpref{wxApp::Yield}{wxappyield}.
+
+This function is kept only for backwards compatibility. Please use
+the \helpref{wxApp::Yield}{wxappyield} method instead in any new code.
+
+\wxheading{Include files}
+
+<wx/app.h> or <wx/utils.h>
+
+
+\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
+
+\func{void}{wxWakeUpIdle}{\void}
+
+This functions wakes up the (internal and platform dependent) idle system, i.e. it
+will force the system to send an idle event even if the system currently {\it is}
+ idle and thus would not send any idle event until after some other event would get
+sent. This is also useful for sending events between two threads and is used by
+the corresponding functions \helpref{::wxPostEvent}{wxpostevent} and
+\helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
+
+\wxheading{Include files}
+
+<wx/event.h>
+
+
+
+\section{Process control functions}\label{processfunctions}
+
+The functions in this section are used to launch or terminate the other
+processes.
+
+
+\membersection{::wxExecute}\label{wxexecute}
+
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{int }{sync = wxEXEC\_ASYNC}, \param{wxProcess *}{callback = NULL}}
+
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteCommand}}
+
+\func{long}{wxExecute}{\param{char **}{argv}, \param{int }{flags = wxEXEC\_ASYNC}, \param{wxProcess *}{callback = NULL}}
+
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteArgs}}
+
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}}
+
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteStdout} and it
+only takes the {\tt command} argument,
+and returns a 2-element list {\tt ( status, output )}, where {\tt output} is
+an array reference.}
+
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}}
+
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteStdoutStderr}
+and it only takes the {\tt command} argument,
+and returns a 3-element list {\tt ( status, output, errors )}, where
+{\tt output} and {\tt errors} are array references.}
+
+Executes another program in Unix or Windows.
+
+The first form takes a command string, such as {\tt "emacs file.txt"}.
+
+The second form takes an array of values: a command, any number of
+arguments, terminated by NULL.
+
+The semantics of the third and fourth versions is different from the first two
+and is described in more details below.
+
+If {\it flags} parameter contains {\tt wxEXEC\_ASYNC} flag (the default), flow
+of control immediately returns. If it contains {\tt wxEXEC\_SYNC}, the current
+application waits until the other program has terminated.
+
+In the case of synchronous execution, the return value is the exit code of
+the process (which terminates by the moment the function returns) and will be
+$-1$ if the process couldn't be started and typically 0 if the process
+terminated successfully. Also, while waiting for the process to
+terminate, wxExecute will call \helpref{wxYield}{wxyield}. The caller
+should ensure that this can cause no recursion, in the simplest case by
+calling \helpref{wxEnableTopLevelWindows(false)}{wxenabletoplevelwindows}.
+
+For asynchronous execution, however, the return value is the process id and
+zero value indicates that the command could not be executed. As an added
+complication, the return value of $-1$ in this case indicates that we didn't
+launch a new process, but connected to the running one (this can only happen in
+case of using DDE under Windows for command execution). In particular, in this,
+and only this, case the calling code will not get the notification about
+process termination.
+
+If callback isn't NULL and if execution is asynchronous,
+\helpref{wxProcess::OnTerminate}{wxprocessonterminate} will be called when
+the process finishes. Specifying this parameter also allows you to redirect the
+standard input and/or output of the process being launched by calling
+\helpref{Redirect}{wxprocessredirect}. If the child process IO is redirected,
+under Windows the process window is not shown by default (this avoids having to
+flush an unnecessary console for the processes which don't create any windows
+anyhow) but a {\tt wxEXEC\_NOHIDE} flag can be used to prevent this from
+happening, i.e. with this flag the child process window will be shown normally.
+
+Under Unix the flag {\tt wxEXEC\_MAKE\_GROUP\_LEADER} may be used to ensure
+that the new process is a group leader (this will create a new session if
+needed). Calling \helpref{wxKill}{wxkill} with the argument of -pid where pid
+is the process ID of the new process will kill this process as well as all of
+its children (except those which have started their own session).
+
+Finally, you may use the third overloaded version of this function to execute
+a process (always synchronously) and capture its output in the array
+{\it output}. The fourth version adds the possibility to additionally capture
+the messages from standard error output in the {\it errors} array.
+
+{\bf NB:} Currently wxExecute() can only be used from the main thread, calling
+this function from another thread will result in an assert failure in debug
+build and won't work.
+
+\wxheading{See also}
+
+\helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess}, \helpref{Exec sample}{sampleexec}.
+
+\wxheading{Parameters}
+
+\docparam{command}{The command to execute and any parameters to pass to it as a
+single string.}
+
+\docparam{argv}{The command to execute should be the first element of this
+array, any additional ones are the command parameters and the array must be
+terminated with a NULL pointer.}
+
+\docparam{flags}{Combination of bit masks {\tt wxEXEC\_ASYNC},
+{\tt wxEXEC\_SYNC} and {\tt wxEXEC\_NOHIDE}}
+
+\docparam{callback}{An optional pointer to \helpref{wxProcess}{wxprocess}}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxExit}\label{wxexit}
+
+\func{void}{wxExit}{\void}
+
+Exits application after calling \helpref{wxApp::OnExit}{wxapponexit}.
+Should only be used in an emergency: normally the top-level frame
+should be deleted (after deleting all other frames) to terminate the
+application. See \helpref{wxCloseEvent}{wxcloseevent} and \helpref{wxApp}{wxapp}.
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+
+\membersection{::wxKill}\label{wxkill}
+
+\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}}
+
+Equivalent to the Unix kill function: send the given signal {\it sig} to the
+process with PID {\it pid}. The valid signal values are
+
+\begin{verbatim}
+enum wxSignal
+{
+ wxSIGNONE = 0, // verify if the process exists under Unix
+ wxSIGHUP,
+ wxSIGINT,
+ wxSIGQUIT,
+ wxSIGILL,
+ wxSIGTRAP,
+ wxSIGABRT,
+ wxSIGEMT,
+ wxSIGFPE,
+ wxSIGKILL, // forcefully kill, dangerous!
+ wxSIGBUS,
+ wxSIGSEGV,
+ wxSIGSYS,
+ wxSIGPIPE,
+ wxSIGALRM,
+ wxSIGTERM // terminate the process gently
+};
+\end{verbatim}
+
+{\tt wxSIGNONE}, {\tt wxSIGKILL} and {\tt wxSIGTERM} have the same meaning
+under both Unix and Windows but all the other signals are equivalent to
+{\tt wxSIGTERM} under Windows.
+
+Returns 0 on success, -1 on failure. If {\it rc} parameter is not NULL, it will
+be filled with an element of {\tt wxKillError} enum:
+
+\begin{verbatim}
+enum wxKillError
+{
+ wxKILL_OK, // no error
+ wxKILL_BAD_SIGNAL, // no such signal
+ wxKILL_ACCESS_DENIED, // permission denied
+ wxKILL_NO_PROCESS, // no such process
+ wxKILL_ERROR // another, unspecified error
+};
+\end{verbatim}
+
+\wxheading{See also}
+
+\helpref{wxProcess::Kill}{wxprocesskill},\rtfsp
+\helpref{wxProcess::Exists}{wxprocessexists},\rtfsp
+\helpref{Exec sample}{sampleexec}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetProcessId}\label{wxgetprocessid}
+
+\func{unsigned long}{wxGetProcessId}{\void}
+
+Returns the number uniquely identifying the current process in the system.
+
+If an error occurs, $0$ is returned.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxShell}\label{wxshell}
+
+\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
+
+Executes a command in an interactive shell window. If no command is
+specified, then just the shell is spawned.
+
+See also \helpref{wxExecute}{wxexecute}, \helpref{Exec sample}{sampleexec}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxShutdown}\label{wxshutdown}
+
+\func{bool}{wxShutdown}{\param{wxShutdownFlags}{flags}}
+
+This function shuts down or reboots the computer depending on the value of the
+{\it flags}. Please notice that doing this requires the corresponding access
+rights (superuser under Unix, {\tt SE\_SHUTDOWN} privelege under Windows NT)
+and that this function is only implemented under Unix and Win32.
+
+\wxheading{Parameters}
+
+\docparam{flags}{Either {\tt wxSHUTDOWN\_POWEROFF} or {\tt wxSHUTDOWN\_REBOOT}}
+
+\wxheading{Returns}
+
+{\tt true} on success, {\tt false} if an error occured.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+
\section{Thread functions}\label{threadfunctions}
+The functions and macros here mainly exist to make it writing the code which
+may be compiled in multi thread build ({\tt wxUSE\_THREADS} $= 1$) as well as
+in single thread configuration ({\tt wxUSE\_THREADS} $= 0$).
+
+For example, a static variable must be protected against simultaneous access by
+multiple threads in the former configuration but in the latter the extra
+overhead of using the critical section is not needed. To solve this problem,
+the \helpref{wxCRITICAL\_SECTION}{wxcriticalsectionmacro} macro may be used
+to create and use the critical section only when needed.
+
\wxheading{Include files}
<wx/thread.h>
\helpref{wxThread}{wxthread}, \helpref{wxMutex}{wxmutex}, \helpref{Multithreading overview}{wxthreadoverview}
+
+
+\membersection{wxCRIT\_SECT\_DECLARE}\label{wxcritsectdeclare}
+
+\func{}{wxCRIT\_SECT\_DECLARE}{\param{}{cs}}
+
+This macro declares a (static) critical section object named {\it cs} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
+
+
+\membersection{wxCRIT\_SECT\_DECLARE\_MEMBER}\label{wxcritsectdeclaremember}
+
+\func{}{wxCRIT\_SECT\_DECLARE}{\param{}{cs}}
+
+This macro declares a critical section object named {\it cs} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$. As it doesn't
+include the {\tt static} keyword (unlike
+\helpref{wxCRIT\_SECT\_DECLARE}{wxcritsectdeclare}), it can be used to declare
+a class or struct member which explains its name.
+
+
+
+\membersection{wxCRIT\_SECT\_LOCKER}\label{wxcritsectlocker}
+
+\func{}{wxCRIT\_SECT\_LOCKER}{\param{}{name}, \param{}{cs}}
+
+This macro creates a \helpref{critical section lock}{wxcriticalsectionlocker}
+object named {\it name} and associated with the critical section {\it cs} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
+
+
+\membersection{wxCRITICAL\_SECTION}\label{wxcriticalsectionmacro}
+
+\func{}{wxCRITICAL\_SECTION}{\param{}{name}}
+
+This macro combines \helpref{wxCRIT\_SECT\_DECLARE}{wxcritsectdeclare} and
+\helpref{wxCRIT\_SECT\_LOCKER}{wxcritsectlocker}: it creates a static critical
+section object and also the lock object associated with it. Because of this, it
+can be only used inside a function, not at global scope. For example:
+
+\begin{verbatim}
+int IncCount()
+{
+ static int s_counter = 0;
+
+ wxCRITICAL_SECTION(counter);
+
+ return ++s_counter;
+}
+\end{verbatim}
+
+(note that we suppose that the function is called the first time from the main
+thread so that the critical section object is initialized correctly by the time
+other threads start calling it, if this is not the case this approach can
+{\bf not} be used and the critical section must be made a global instead).
+
+
+
+\membersection{wxENTER\_CRIT\_SECT}\label{wxentercritsect}
+
+\func{}{wxENTER\_CRIT\_SECT}{\param{wxCriticalSection\& }{cs}}
+
+This macro is equivalent to \helpref{cs.Enter()}{wxcriticalsectionenter} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
+
+
+\membersection{::wxIsMainThread}\label{wxismainthread}
+
+\func{bool}{wxIsMainThread}{\void}
+
+Returns {\tt true} if this thread is the main one. Always returns {\tt true} if
+{\tt wxUSE\_THREADS} is $0$.
+
+
+
+\membersection{wxLEAVE\_CRIT\_SECT}\label{wxleavecritsect}
+
+\func{}{wxLEAVE\_CRIT\_SECT}{\param{wxCriticalSection\& }{cs}}
+
+This macro is equivalent to \helpref{cs.Leave()}{wxcriticalsectionleave} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
+
+
\membersection{::wxMutexGuiEnter}\label{wxmutexguienter}
\func{void}{wxMutexGuiEnter}{\void}
This function is only defined on platforms which support preemptive
threads.
+
\membersection{::wxMutexGuiLeave}\label{wxmutexguileave}
\func{void}{wxMutexGuiLeave}{\void}
This function is only defined on platforms which support preemptive
threads.
+
+
\section{File functions}\label{filefunctions}
\wxheading{Include files}
\wxheading{See also}
-\helpref{wxPathList}{wxpathlist}, \helpref{wxDir}{wxdir}, \helpref{wxFile}{wxfile}
+\helpref{wxPathList}{wxpathlist}\\
+\helpref{wxDir}{wxdir}\\
+\helpref{wxFile}{wxfile}\\
+\helpref{wxFileName}{wxfilename}
+
-\membersection{::wxDirExists}
+\membersection{::wxDirExists}\label{functionwxdirexists}
\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
-Returns TRUE if the directory exists.
+Returns true if the directory exists.
+
-\membersection{::wxDos2UnixFilename}
+\membersection{::wxDos2UnixFilename}\label{wxdos2unixfilename}
-\func{void}{Dos2UnixFilename}{\param{const wxString\& }{s}}
+\func{void}{wxDos2UnixFilename}{\param{wxChar *}{s}}
Converts a DOS to a Unix filename by replacing backslashes with forward
slashes.
-\membersection{::wxFileExists}
+
+\membersection{::wxFileExists}\label{functionwxfileexists}
\func{bool}{wxFileExists}{\param{const wxString\& }{filename}}
-Returns TRUE if the file exists. It also returns TRUE if the file is
-a directory.
+Returns true if the file exists and is a plain file.
+
\membersection{::wxFileModificationTime}\label{wxfilemodificationtime}
Returns time of last modification of given file.
-\membersection{::wxFileNameFromPath}
+
+\membersection{::wxFileNameFromPath}\label{wxfilenamefrompath}
\func{wxString}{wxFileNameFromPath}{\param{const wxString\& }{path}}
-\func{char*}{wxFileNameFromPath}{\param{char* }{path}}
+\func{char *}{wxFileNameFromPath}{\param{char *}{path}}
+
+{\bf NB:} This function is obsolete, please use
+\helpref{wxFileName::SplitPath}{wxfilenamesplitpath} instead.
Returns the filename for a full path. The second form returns a pointer to
temporary storage that should not be deallocated.
+
\membersection{::wxFindFirstFile}\label{wxfindfirstfile}
-\func{wxString}{wxFindFirstFile}{\param{const char*}{spec}, \param{int}{ flags = 0}}
+\func{wxString}{wxFindFirstFile}{\param{const char *}{spec}, \param{int}{ flags = 0}}
This function does directory searching; returns the first file
that matches the path {\it spec}, or the empty string. Use \helpref{wxFindNextFile}{wxfindnextfile} to
}
\end{verbatim}
+
\membersection{::wxFindNextFile}\label{wxfindnextfile}
\func{wxString}{wxFindNextFile}{\void}
See \helpref{wxFindFirstFile}{wxfindfirstfile} for an example.
+
+\membersection{::wxGetDiskSpace}\label{wxgetdiskspace}
+
+\func{bool}{wxGetDiskSpace}{\param{const wxString\& }{path}, \param{wxLongLong }{*total = NULL}, \param{wxLongLong }{*free = NULL}}
+
+This function returns the total number of bytes and number of free bytes on
+the disk containing the directory {\it path} (it should exist). Both
+{\it total} and {\it free} parameters may be {\tt NULL} if the corresponding
+information is not needed.
+
+\wxheading{Returns}
+
+{\tt true} on success, {\tt false} if an error occured (for example, the
+directory doesn't exist).
+
+\wxheading{Portability}
+
+This function is implemented for Win16 (only for drives less than 2Gb), Win32,
+Mac OS and generic Unix provided the system has {\tt statfs()} function.
+
+This function first appeared in wxWindows 2.3.2.
+
+
\membersection{::wxGetOSDirectory}\label{wxgetosdirectory}
\func{wxString}{wxGetOSDirectory}{\void}
Returns the Windows directory under Windows; on other platforms returns the empty string.
-\membersection{::wxIsAbsolutePath}
+
+\membersection{::wxIsAbsolutePath}\label{wxisabsolutepath}
\func{bool}{wxIsAbsolutePath}{\param{const wxString\& }{filename}}
-Returns TRUE if the argument is an absolute filename, i.e. with a slash
+Returns true if the argument is an absolute filename, i.e. with a slash
or drive name at the beginning.
-\membersection{::wxPathOnly}
+
+\membersection{::wxPathOnly}\label{wxpathonly}
\func{wxString}{wxPathOnly}{\param{const wxString\& }{path}}
Returns the directory part of the filename.
-\membersection{::wxUnix2DosFilename}
+
+\membersection{::wxUnix2DosFilename}\label{wxunix2dosfilename}
\func{void}{wxUnix2DosFilename}{\param{const wxString\& }{s}}
Converts a Unix to a DOS filename by replacing forward
slashes with backslashes.
-\membersection{::wxConcatFiles}
+
+\membersection{::wxConcatFiles}\label{wxconcatfiles}
\func{bool}{wxConcatFiles}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2},
\param{const wxString\& }{file3}}
Concatenates {\it file1} and {\it file2} to {\it file3}, returning
-TRUE if successful.
+true if successful.
+
+
+\membersection{::wxCopyFile}\label{wxcopyfile}
-\membersection{::wxCopyFile}
+\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = true}}
-\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
+Copies {\it file1} to {\it file2}, returning true if successful. If
+{\it overwrite} parameter is true (default), the destination file is overwritten
+if it exists, but if {\it overwrite} is false, the functions fails in this
+case.
-Copies {\it file1} to {\it file2}, returning TRUE if successful.
\membersection{::wxGetCwd}\label{wxgetcwd}
Returns a string containing the current (or working) directory.
-\membersection{::wxGetWorkingDirectory}
-\func{wxString}{wxGetWorkingDirectory}{\param{char*}{buf=NULL}, \param{int }{sz=1000}}
+\membersection{::wxGetWorkingDirectory}\label{wxgetworkingdirectory}
-This function is obsolete: use \helpref{wxGetCwd}{wxgetcwd} instead.
+\func{wxString}{wxGetWorkingDirectory}{\param{char *}{buf=NULL}, \param{int }{sz=1000}}
+
+{\bf NB:} This function is obsolete: use \helpref{wxGetCwd}{wxgetcwd} instead.
Copies the current working directory into the buffer if supplied, or
-copies the working directory into new storage (which you must delete yourself)
-if the buffer is NULL.
+copies the working directory into new storage (which you {\emph must} delete
+yourself) if the buffer is NULL.
{\it sz} is the size of the buffer if supplied.
-\membersection{::wxGetTempFileName}
-\func{char*}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char* }{buf=NULL}}
+\membersection{::wxGetTempFileName}\label{wxgettempfilename}
-\func{bool}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{wxString\& }{buf}}
+\func{char *}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char *}{buf=NULL}}
-Makes a temporary filename based on {\it prefix}, opens and closes the file,
-and places the name in {\it buf}. If {\it buf} is NULL, new store
-is allocated for the temporary filename using {\it new}.
+\func{bool}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{wxString\& }{buf}}
-Under Windows, the filename will include the drive and name of the
-directory allocated for temporary files (usually the contents of the
-TEMP variable). Under Unix, the {\tt /tmp} directory is used.
+%% Makes a temporary filename based on {\it prefix}, opens and closes the file,
+%% and places the name in {\it buf}. If {\it buf} is NULL, new store
+%% is allocated for the temporary filename using {\it new}.
+%%
+%% Under Windows, the filename will include the drive and name of the
+%% directory allocated for temporary files (usually the contents of the
+%% TEMP variable). Under Unix, the {\tt /tmp} directory is used.
+%%
+%% It is the application's responsibility to create and delete the file.
+
+{\bf NB:} These functions are obsolete, please use\rtfsp
+\helpref{wxFileName::CreateTempFileName}{wxfilenamecreatetempfilename}\rtfsp
+instead.
-It is the application's responsibility to create and delete the file.
\membersection{::wxIsWild}\label{wxiswild}
\func{bool}{wxIsWild}{\param{const wxString\& }{pattern}}
-Returns TRUE if the pattern contains wildcards. See \helpref{wxMatchWild}{wxmatchwild}.
+Returns true if the pattern contains wildcards. See \helpref{wxMatchWild}{wxmatchwild}.
+
\membersection{::wxMatchWild}\label{wxmatchwild}
\func{bool}{wxMatchWild}{\param{const wxString\& }{pattern}, \param{const wxString\& }{text}, \param{bool}{ dot\_special}}
-Returns TRUE if the {\it pattern}\/ matches the {\it text}\/; if {\it
-dot\_special}\/ is TRUE, filenames beginning with a dot are not matched
+Returns true if the {\it pattern}\/ matches the {\it text}\/; if {\it
+dot\_special}\/ is true, filenames beginning with a dot are not matched
with wildcard characters. See \helpref{wxIsWild}{wxiswild}.
-\membersection{::wxMkdir}
+
+\membersection{::wxMkdir}\label{wxmkdir}
\func{bool}{wxMkdir}{\param{const wxString\& }{dir}, \param{int }{perm = 0777}}
-Makes the directory {\it dir}, returning TRUE if successful.
+Makes the directory {\it dir}, returning true if successful.
{\it perm} is the access mask for the directory for the systems on which it is
supported (Unix) and doesn't have effect for the other ones.
-\membersection{::wxRemoveFile}
+
+\membersection{::wxRemoveFile}\label{wxremovefile}
\func{bool}{wxRemoveFile}{\param{const wxString\& }{file}}
-Removes {\it file}, returning TRUE if successful.
+Removes {\it file}, returning true if successful.
-\membersection{::wxRenameFile}
+
+\membersection{::wxRenameFile}\label{wxrenamefile}
\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
-Renames {\it file1} to {\it file2}, returning TRUE if successful.
+Renames {\it file1} to {\it file2}, returning true if successful.
+
-\membersection{::wxRmdir}
+\membersection{::wxRmdir}\label{wxrmdir}
\func{bool}{wxRmdir}{\param{const wxString\& }{dir}, \param{int}{ flags=0}}
-Removes the directory {\it dir}, returning TRUE if successful. Does not work under VMS.
+Removes the directory {\it dir}, returning true if successful. Does not work under VMS.
The {\it flags} parameter is reserved for future use.
-\membersection{::wxSetWorkingDirectory}
+
+\membersection{::wxSetWorkingDirectory}\label{wxsetworkingdirectory}
\func{bool}{wxSetWorkingDirectory}{\param{const wxString\& }{dir}}
-Sets the current working directory, returning TRUE if the operation succeeded.
+Sets the current working directory, returning true if the operation succeeded.
Under MS Windows, the current drive is also changed if {\it dir} contains a drive specification.
+
\membersection{::wxSplitPath}\label{wxsplitfunction}
\func{void}{wxSplitPath}{\param{const char *}{ fullname}, \param{wxString *}{ path}, \param{wxString *}{ name}, \param{wxString *}{ ext}}
+{\bf NB:} This function is obsolete, please use
+\helpref{wxFileName::SplitPath}{wxfilenamesplitpath} instead.
+
This function splits a full file name into components: the path (including possible disk/drive
specification under Windows), the base name and the extension. Any of the output parameters
({\it path}, {\it name} or {\it ext}) may be NULL if you are not interested in the value of
strings pointed to by these parameters will be overwritten in any case (if the pointers
are not NULL).
+
\membersection{::wxTransferFileToStream}\label{wxtransferfiletostream}
\func{bool}{wxTransferFileToStream}{\param{const wxString\& }{filename}, \param{ostream\& }{stream}}
Copies the given file to {\it stream}. Useful when converting an old application to
use streams (within the document/view framework, for example).
-Use of this function requires the file wx\_doc.h to be included.
+\wxheading{Include files}
+
+<wx/docview.h>
+
\membersection{::wxTransferStreamToFile}\label{wxtransferstreamtofile}
Copies the given stream to the file {\it filename}. Useful when converting an old application to
use streams (within the document/view framework, for example).
-Use of this function requires the file wx\_doc.h to be included.
+\wxheading{Include files}
+
+<wx/docview.h>
+
+
+
+\section{Network, user and OS functions}\label{networkfunctions}
+
+The functions in this section are used to retrieve information about the
+current computer and/or user characteristics.
+
+
+\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
+
+\func{long}{wxGetFreeMemory}{\void}
+
+Returns the amount of free memory in bytes under environments which
+support it, and -1 if not supported. Currently, it is supported only
+under Windows, Linux and Solaris.
+
+\wxheading{Include files}
+
+<wx/utils.h>
-\section{Network functions}\label{networkfunctions}
\membersection{::wxGetFullHostName}\label{wxgetfullhostname}
<wx/utils.h>
+
\membersection{::wxGetEmailAddress}\label{wxgetemailaddress}
\func{bool}{wxGetEmailAddress}{\param{const wxString\& }{buf}, \param{int }{sz}}
concatenating the values returned by \helpref{wxGetFullHostName}{wxgetfullhostname}\rtfsp
and \helpref{wxGetUserId}{wxgetuserid}.
-Returns TRUE if successful, FALSE otherwise.
+Returns true if successful, false otherwise.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetHomeDir}\label{wxgethomedir}
+
+\func{wxString}{wxGetHomeDir}{\void}
+
+Return the (current) user's home directory.
+
+\wxheading{See also}
+
+\helpref{wxGetUserHome}{wxgetuserhome}
\wxheading{Include files}
<wx/utils.h>
+
\membersection{::wxGetHostName}\label{wxgethostname}
\func{wxString}{wxGetHostName}{\void}
in the {\bf wxWindows} section of the WIN.INI file is tried.
The first variant of this function returns the hostname if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+empty string otherwise. The second (deprecated) function returns true
+if successful, false otherwise.
\wxheading{See also}
<wx/utils.h>
-\section{User identification}\label{useridfunctions}
\membersection{::wxGetUserId}\label{wxgetuserid}
in the {\bf wxWindows} section of the WIN.INI file is tried.
The first variant of this function returns the login name if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+empty string otherwise. The second (deprecated) function returns true
+if successful, false otherwise.
\wxheading{See also}
<wx/utils.h>
+
+\membersection{::wxGetOsDescription}\label{wxgetosdescription}
+
+\func{wxString}{wxGetOsDescription}{\void}
+
+Returns the string containing the description of the current platform in a
+user-readable form. For example, this function may return strings like
+{\tt Windows NT Version 4.0} or {\tt Linux 2.2.2 i386}.
+
+\wxheading{See also}
+
+\helpref{::wxGetOsVersion}{wxgetosversion}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetOsVersion}\label{wxgetosversion}
+
+\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
+
+Gets operating system version information.
+
+\begin{twocollist}\itemsep=0pt
+\twocolitemruled{Platform}{Return types}
+\twocolitem{Mac OS}{Return value is wxMAC when compiled with CodeWarrior under Mac OS 8.x/9.x and Mac OS X, wxMAC\_DARWIN when compiled with the Apple Developer Tools under Mac OS X.
+
+Both {\it major} and {\it minor} have to be looked at as hexadecimal numbers. So System 10.2.4 returns 0x10, resp 16 for {\it major} and 0x24, resp 36 for {\it minor}. }
+\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
+\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
+\twocolitem{OS/2}{Return value is wxOS2\_PM.}
+\twocolitem{Windows 3.1}{Return value is wxWINDOWS, {\it major} is 3, {\it minor} is 1.}
+\twocolitem{Windows NT/2000}{Return value is wxWINDOWS\_NT, version is returned in {\it major} and {\it minor}}
+\twocolitem{Windows 98}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 1 or greater.}
+\twocolitem{Windows 95}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 0.}
+\twocolitem{Win32s (Windows 3.1)}{Return value is wxWIN32S, {\it major} is 3, {\it minor} is 1.}
+\twocolitem{Watcom C++ 386 supervisor mode (Windows 3.1)}{Return value is wxWIN386, {\it major} is 3, {\it minor} is 1.}
+\end{twocollist}
+
+\wxheading{See also}
+
+\helpref{::wxGetOsDescription}{wxgetosdescription}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetUserHome}\label{wxgetuserhome}
+
+\func{const wxChar *}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
+
+Returns the home directory for the given user. If the username is empty
+(default value), this function behaves like
+\helpref{wxGetHomeDir}{wxgethomedir}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{::wxGetUserName}\label{wxgetusername}
\func{wxString}{wxGetUserName}{\void}
the PENWIN.INI file is used.
The first variant of this function returns the user name if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+empty string otherwise. The second (deprecated) function returns {\tt true}
+if successful, {\tt false} otherwise.
\wxheading{See also}
<wx/utils.h>
+
+
\section{String functions}
-\membersection{::copystring}
-\func{char*}{copystring}{\param{const char* }{s}}
+\membersection{::copystring}\label{copystring}
+
+\func{char *}{copystring}{\param{const char *}{s}}
Makes a copy of the string {\it s} using the C++ new operator, so it can be
deleted with the {\it delete} operator.
-\membersection{::wxStringMatch}
+This function is deprecated, use \helpref{wxString}{wxstring} class instead.
-\func{bool}{wxStringMatch}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2},\\
- \param{bool}{ subString = TRUE}, \param{bool}{ exact = FALSE}}
-Returns TRUE if the substring {\it s1} is found within {\it s2},
-ignoring case if {\it exact} is FALSE. If {\it subString} is FALSE,
-no substring matching is done.
+\membersection{ngettext}\label{ngettext}
-\membersection{::wxStringEq}\label{wxstringeq}
+\func{const wxChar *}{ngettext}{\param{const char *}{str}, \param{const char *}{strPlural}, \param{size\_t }{n}}
-\func{bool}{wxStringEq}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2}}
+This macro expands into a call to plural form version of
+\helpref{wxGetTranslation}{wxgettranslation}
+function, so it marks the message for the extraction by {\tt xgettext} just as
+\helpref{wxTRANSLATE}{wxtranslate} does, but also returns the translation of
+the string for the current locale during execution, either singular or plural
+form depending on the value of \arg{n}.
-A macro defined as:
+\wxheading{See also}
-\begin{verbatim}
-#define wxStringEq(s1, s2) (s1 && s2 && (strcmp(s1, s2) == 0))
-\end{verbatim}
+\helpref{\_}{underscore}
+
+
+\membersection{::wxGetTranslation}\label{wxgettranslation}
+
+\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
+
+\func{const char *}{wxGetTranslation}{\param{const char * }{str}, \param{const char * }{strPlural}, \param{size\_t }{n}}
+
+This function returns the translation of string {\it str} in the current
+\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
+message catalogs (see \helpref{internationalization overview}{internationalization}), the
+original string is returned. In debug build, an error message is logged -- this
+should help to find the strings which were not yet translated. As this function
+is used very often, an alternative (and also common in Unix world) syntax is
+provided: the \helpref{\_()}{underscore} macro is defined to do the same thing
+as wxGetTranslation.
+
+The second form is used when retrieving translation of string that has
+different singular and plural form in English or different plural forms in some
+other language. It takes two extra arguments: \arg{str}
+parameter must contain the singular form of the string to be converted.
+It is also used as the key for the search in the catalog.
+The \arg{strPlural} parameter is the plural form (in English).
+The parameter \arg{n} is used to determine the plural form. If no
+message catalog is found \arg{str} is returned if `n == 1',
+otherwise \arg{strPlural}. The \helpref{ngettext}{ngettext} macro is defined
+to do the same thing.
+See \urlref{GNU gettext manual}{http://www.gnu.org/manual/gettext/html\_chapter/gettext\_10.html\#SEC150} for additional information on plural forms handling.
-\membersection{::IsEmpty}\label{isempty}
+\membersection{::wxIsEmpty}\label{wxisempty}
-\func{bool}{IsEmpty}{\param{const char *}{ p}}
+\func{bool}{wxIsEmpty}{\param{const char *}{ p}}
-Returns TRUE if the string is empty, FALSE otherwise. It is safe to pass NULL
-pointer to this function and it will return TRUE for it.
+Returns {\tt true} if the pointer is either {\tt NULL} or points to an empty
+string, {\tt false} otherwise.
-\membersection{::Stricmp}\label{stricmp}
-\func{int}{Stricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
+\membersection{::wxStrcmp}\label{wxstrcmp}
+
+\func{int}{wxStrcmp}{\param{const char *}{p1}, \param{const char *}{p2}}
+
+Returns a negative value, 0, or positive value if {\it p1} is less than, equal
+to or greater than {\it p2}. The comparison is case-sensitive.
+
+This function complements the standard C function {\it stricmp()} which performs
+case-insensitive comparison.
+
+
+\membersection{::wxStricmp}\label{wxstricmp}
+
+\func{int}{wxStricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
Returns a negative value, 0, or positive value if {\it p1} is less than, equal
to or greater than {\it p2}. The comparison is case-insensitive.
This function complements the standard C function {\it strcmp()} which performs
case-sensitive comparison.
-\membersection{::Strlen}\label{strlen}
-\func{size\_t}{Strlen}{\param{const char *}{ p}}
+\membersection{::wxStringMatch}\label{wxstringmatch}
-This is a safe version of standard function {\it strlen()}: it does exactly the
-same thing (i.e. returns the length of the string) except that it returns 0 if
-{\it p} is the NULL pointer.
+\func{bool}{wxStringMatch}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2},\\
+ \param{bool}{ subString = true}, \param{bool}{ exact = false}}
-\membersection{::wxGetTranslation}\label{wxgettranslation}
+{\bf NB:} This function is obsolete, use \helpref{wxString::Find}{wxstringfind} instead.
-\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
+Returns {\tt true} if the substring {\it s1} is found within {\it s2},
+ignoring case if {\it exact} is false. If {\it subString} is {\tt false},
+no substring matching is done.
+
+
+\membersection{::wxStringEq}\label{wxstringeq}
+
+\func{bool}{wxStringEq}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2}}
+
+{\bf NB:} This function is obsolete, use \helpref{wxString}{wxstring} instead.
+
+A macro defined as:
+
+\begin{verbatim}
+#define wxStringEq(s1, s2) (s1 && s2 && (strcmp(s1, s2) == 0))
+\end{verbatim}
+
+
+\membersection{::wxStrlen}\label{wxstrlen}
+
+\func{size\_t}{wxStrlen}{\param{const char *}{ p}}
+
+This is a safe version of standard function {\it strlen()}: it does exactly the
+same thing (i.e. returns the length of the string) except that it returns 0 if
+{\it p} is the {\tt NULL} pointer.
-This function returns the translation of string {\it str} in the current
-\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
-message catalogs (see \helpref{internationalization overview}{internationalization}), the
-original string is returned. In debug build, an error message is logged - this
-should help to find the strings which were not yet translated. As this function
-is used very often, an alternative syntax is provided: the \_() macro is
-defined as wxGetTranslation().
\membersection{::wxSnprintf}\label{wxsnprintf}
\helpref{wxVsnprintf}{wxvsnprintf}, \helpref{wxString::Printf}{wxstringprintf}
+
+\membersection{wxT}\label{wxt}
+
+\func{wxChar}{wxT}{\param{char }{ch}}
+
+\func{const wxChar *}{wxT}{\param{const char *}{s}}
+
+wxT() is a macro which can be used with character and string literals (in other
+words, {\tt 'x'} or {\tt "foo"}) to automatically convert them to Unicode in
+Unicode build configuration. Please see the
+\helpref{Unicode overview}{unicode} for more information.
+
+This macro is simply returns the value passed to it without changes in ASCII
+build. In fact, its definition is:
+\begin{verbatim}
+#ifdef UNICODE
+#define wxT(x) L ## x
+#else // !Unicode
+#define wxT(x) x
+#endif
+\end{verbatim}
+
+
+\membersection{wxTRANSLATE}\label{wxtranslate}
+
+\func{const wxChar *}{wxTRANSLATE}{\param{const char *}{s}}
+
+This macro doesn't do anything in the program code -- it simply expands to the
+value of its argument (expand in Unicode build where it is equivalent to
+\helpref{wxT}{wxt} which makes it unnecessary to use both wxTRANSLATE and wxT
+with the same string which would be really unreadable).
+
+However it does have a purpose and it is to mark the literal strings for the
+extraction into the message catalog created by {\tt xgettext} program. Usually
+this is achieved using \helpref{\_()}{underscore} but that macro not only marks
+the string for extraction but also expands into
+\helpref{wxGetTranslation}{wxgettranslation} function call which means that it
+cannot be used in some situations, notably for the static arrays
+initialization.
+
+Here is an example which should make it more clear: suppose that you have a
+static array of strings containing the weekday names and which have to be
+translated (note that it is a bad example, really, as
+\helpref{wxDateTime}{wxdatetime} already can be used to get the localized week
+day names already). If you write
+\begin{verbatim}
+static const wxChar * const weekdays[] = { _("Mon"), ..., _("Sun") };
+...
+// use weekdays[n] as usual
+\end{verbatim}
+the code wouldn't compile because the function calls are forbidden in the array
+initializer. So instead you should do
+\begin{verbatim}
+static const wxChar * const weekdays[] = { wxTRANSLATE("Mon"), ..., wxTRANSLATE("Sun") };
+...
+// use wxGetTranslation(weekdays[n])
+\end{verbatim}
+here.
+
+Note that although the code {\bf would} compile if you simply omit
+wxTRANSLATE() in the above, it wouldn't work as expected because there would be
+no translations for the weekday names in the program message catalog and
+wxGetTranslation wouldn't find them.
+
+
+
\membersection{::wxVsnprintf}\label{wxvsnprintf}
-\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argptr}}
+\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argPtr}}
-The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list}
+The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list }
argument instead of arbitrary number of parameters.
\wxheading{See also}
\helpref{wxSnprintf}{wxsnprintf}, \helpref{wxString::PrintfV}{wxstringprintfv}
+
+
+\membersection{\_}\label{underscore}
+
+\func{const wxChar *}{\_}{\param{const char *}{s}}
+
+This macro expands into a call to \helpref{wxGetTranslation}{wxgettranslation}
+function, so it marks the message for the extraction by {\tt xgettext} just as
+\helpref{wxTRANSLATE}{wxtranslate} does, but also returns the translation of
+the string for the current locale during execution.
+
+Don't confuse this macro with \helpref{\_T()}{underscoret}!
+
+\wxheading{See also}
+
+\helpref{ngettext}{ngettext}
+
+
+
+\membersection{\_T}\label{underscoret}
+
+\func{wxChar}{\_T}{\param{char }{ch}}
+
+\func{const wxChar *}{\_T}{\param{const wxChar }{ch}}
+
+This macro is exactly the same as \helpref{wxT}{wxt} and is defined in
+wxWindows simply because it may be more intuitive for Windows programmers as
+the standard Win32 headers also define it (as well as yet another name for the
+same macro which is {\tt \_TEXT()}).
+
+Don't confuse this macro with \helpref{\_()}{underscore}!
+
+
+
\section{Dialog functions}\label{dialogfunctions}
Below are a number of convenience functions for getting input from the
parameter, or (in MS Windows or Motif) the wrong window frame may be brought to
the front when the dialog box is popped up.
+
+\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
+
+\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
+
+Changes the cursor to the given cursor for all windows in the application.
+Use \helpref{wxEndBusyCursor}{wxendbusycursor} to revert the cursor back
+to its previous state. These two calls can be nested, and a counter
+ensures that only the outer calls take effect.
+
+See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxBell}\label{wxbell}
+
+\func{void}{wxBell}{\void}
+
+Ring the system bell.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{::wxCreateFileTipProvider}\label{wxcreatefiletipprovider}
\func{wxTipProvider *}{wxCreateFileTipProvider}{\param{const wxString\& }{filename},
<wx/tipdlg.h>
+
+\membersection{::wxDirSelector}\label{wxdirselector}
+
+\func{wxString}{wxDirSelector}{\param{const wxString\& }{message = wxDirSelectorPromptStr},\\
+ \param{const wxString\& }{default\_path = ""},\\
+ \param{long }{style = 0}, \param{const wxPoint\& }{pos = wxDefaultPosition},\\
+ \param{wxWindow *}{parent = NULL}}
+
+Pops up a directory selector dialog. The arguments have the same meaning as
+those of wxDirDialog::wxDirDialog(). The message is displayed at the top,
+and the default\_path, if specified, is set as the initial selection.
+
+The application must check for an empty return value (if the user pressed
+Cancel). For example:
+
+\begin{verbatim}
+const wxString& dir = wxDirSelector("Choose a folder");
+if ( !dir.empty() )
+{
+ ...
+}
+\end{verbatim}
+
+\wxheading{Include files}
+
+<wx/dirdlg.h>
+
+
\membersection{::wxFileSelector}\label{wxfileselector}
\func{wxString}{wxFileSelector}{\param{const wxString\& }{message}, \param{const wxString\& }{default\_path = ""},\\
clicking on Ok, will result in only those files matching the pattern being
displayed.
-The wildcard may be a specification for multiple types of file
+The wildcard may be a specification for multiple types of file
with a description for each, such as:
\begin{verbatim}
Cancel). For example:
\begin{verbatim}
-const wxString& s = wxFileSelector("Choose a file to open");
-if (s)
+wxString filename = wxFileSelector("Choose a file to open");
+if ( !filename.empty() )
{
- ...
+ // work with the file
+ ...
}
+//else: cancelled by user
\end{verbatim}
\wxheading{Include files}
-<wx/filedlg.h>
+<wx/filedlg.h>
+
+
+\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
+
+\func{void}{wxEndBusyCursor}{\void}
+
+Changes the cursor back to the original cursor, for all windows in the application.
+Use with \helpref{wxBeginBusyCursor}{wxbeginbusycursor}.
+
+See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxGetColourFromUser}\label{wxgetcolourfromuser}
<wx/colordlg.h>
+
+\membersection{::wxGetFontFromUser}\label{wxgetfontfromuser}
+
+\func{wxFont}{wxGetFontFromUser}{\param{wxWindow *}{parent}, \param{const wxFont\& }{fontInit}}
+
+Shows the font selection dialog and returns the font selected by user or
+invalid font (use \helpref{wxFont::Ok}{wxfontok} to test whether a font
+is valid) if the dialog was cancelled.
+
+\wxheading{Parameters}
+
+\docparam{parent}{The parent window for the font selection dialog}
+
+\docparam{fontInit}{If given, this will be the font initially selected in the dialog.}
+
+\wxheading{Include files}
+
+<wx/fontdlg.h>
+
+
+
\membersection{::wxGetMultipleChoices}\label{wxgetmultiplechoices}
\func{size\_t}{wxGetMultipleChoices}{\\
\param{const wxArrayString\& }{aChoices},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE},\\
+ \param{bool}{ centre = true},\\
\param{int }{width=150}, \param{int }{height=200}}
\func{size\_t}{wxGetMultipleChoices}{\\
\param{int}{ n}, \param{const wxString\& }{choices[]},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE},\\
+ \param{bool}{ centre = true},\\
\param{int }{width=150}, \param{int }{height=200}}
Pops up a dialog box containing a message, OK/Cancel buttons and a
multiple-selection listbox. The user may choose an arbitrary (including 0)
-number of items in the listbox whose indices will be returned in
+number of items in the listbox whose indices will be returned in
{\it selection} array. The initial contents of this array will be used to
select the items when the dialog is shown.
-You may pass the list of strings to choose from either using {\it choices}
+You may pass the list of strings to choose from either using {\it choices}
which is an array of {\it n} strings for the listbox or by using a single
{\it aChoices} parameter of type \helpref{wxArrayString}{wxarraystring}.
-If {\it centre} is TRUE, the message text (which may include new line
-characters) is centred; if FALSE, the message is left-justified.
+If {\it centre} is true, the message text (which may include new line
+characters) is centred; if false, the message is left-justified.
\wxheading{Include files}
<wx/choicdlg.h>
+\perlnote{In wxPerl there is just an array reference in place of {\tt n}
+and {\tt choices}, and no {\tt selections} parameter; the function
+returns an array containing the user selections.}
+
+
\membersection{::wxGetNumberFromUser}\label{wxgetnumberfromuser}
\func{long}{wxGetNumberFromUser}{
\param{wxWindow *}{parent = NULL},
\param{const wxPoint\& }{pos = wxDefaultPosition}}
-Shows a dialog asking the user for numeric input. The dialogs title is set to
+Shows a dialog asking the user for numeric input. The dialogs title is set to
{\it caption}, it contains a (possibly) multiline {\it message} above the
single line {\it prompt} and the zone for entering the number.
should be positive) and {\it value} is the initial value of it. If the user
enters an invalid value or cancels the dialog, the function will return -1.
-Dialog is centered on its {\it parent} unless an explicit position is given in
+Dialog is centered on its {\it parent} unless an explicit position is given in
{\it pos}.
\wxheading{Include files}
<wx/textdlg.h>
+
\membersection{::wxGetPasswordFromUser}\label{wxgetpasswordfromuser}
\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
<wx/textdlg.h>
+
\membersection{::wxGetTextFromUser}\label{wxgettextfromuser}
\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
\param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
- \param{int}{ x = -1}, \param{int}{ y = -1}, \param{bool}{ centre = TRUE}}
+ \param{int}{ x = -1}, \param{int}{ y = -1}, \param{bool}{ centre = true}}
Pop up a dialog box with title set to {\it caption}, {\it message}, and a
\rtfsp{\it default\_value}. The user may type in text and press OK to return this text,
or press Cancel to return the empty string.
-If {\it centre} is TRUE, the message text (which may include new line characters)
-is centred; if FALSE, the message is left-justified.
+If {\it centre} is true, the message text (which may include new line characters)
+is centred; if false, the message is left-justified.
\wxheading{Include files}
<wx/textdlg.h>
+
\membersection{::wxGetMultipleChoice}\label{wxgetmultiplechoice}
\func{int}{wxGetMultipleChoice}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
\param{int }{nsel}, \param{int *}{selection},
\param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
Pops up a dialog box containing a message, OK/Cancel buttons and a multiple-selection
listbox. The user may choose one or more item(s) and press OK or Cancel.
{\it choices} is an array of {\it n} strings for the listbox.
-If {\it centre} is TRUE, the message text (which may include new line characters)
-is centred; if FALSE, the message is left-justified.
+If {\it centre} is true, the message text (which may include new line characters)
+is centred; if false, the message is left-justified.
\wxheading{Include files}
<wx/choicdlg.h>
+
\membersection{::wxGetSingleChoice}\label{wxgetsinglechoice}
\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message},\\
\param{const wxArrayString\& }{aChoices},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE},\\
+ \param{bool}{ centre = true},\\
\param{int }{width=150}, \param{int }{height=200}}
\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message},\\
\param{int}{ n}, \param{const wxString\& }{choices[]},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE},\\
+ \param{bool}{ centre = true},\\
\param{int }{width=150}, \param{int }{height=200}}
Pops up a dialog box containing a message, OK/Cancel buttons and a
single-selection listbox. The user may choose an item and press OK to return a
-string or Cancel to return the empty string. Use
+string or Cancel to return the empty string. Use
\helpref{wxGetSingleChoiceIndex}{wxgetsinglechoiceindex} if empty string is a
valid choice and if you want to be able to detect pressing Cancel reliably.
-You may pass the list of strings to choose from either using {\it choices}
+You may pass the list of strings to choose from either using {\it choices}
which is an array of {\it n} strings for the listbox or by using a single
{\it aChoices} parameter of type \helpref{wxArrayString}{wxarraystring}.
-If {\it centre} is TRUE, the message text (which may include new line
-characters) is centred; if FALSE, the message is left-justified.
+If {\it centre} is true, the message text (which may include new line
+characters) is centred; if false, the message is left-justified.
\wxheading{Include files}
<wx/choicdlg.h>
+\perlnote{In wxPerl there is just an array reference in place of {\tt n}
+and {\tt choices}.}
+
+
\membersection{::wxGetSingleChoiceIndex}\label{wxgetsinglechoiceindex}
\func{int}{wxGetSingleChoiceIndex}{\param{const wxString\& }{message},\\
\param{const wxString\& }{caption},\\
\param{const wxArrayString\& }{aChoices},\\
\param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
\func{int}{wxGetSingleChoiceIndex}{\param{const wxString\& }{message},\\
\param{const wxString\& }{caption},\\
\param{int}{ n}, \param{const wxString\& }{choices[]},\\
\param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
As {\bf wxGetSingleChoice} but returns the index representing the selected
string. If the user pressed cancel, -1 is returned.
<wx/choicdlg.h>
+\perlnote{In wxPerl there is just an array reference in place of {\tt n}
+and {\tt choices}.}
+
+
\membersection{::wxGetSingleChoiceData}\label{wxgetsinglechoicedata}
\func{wxString}{wxGetSingleChoiceData}{\param{const wxString\& }{message},\\
\param{const wxString\& }{client\_data[]},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
\func{wxString}{wxGetSingleChoiceData}{\param{const wxString\& }{message},\\
\param{const wxString\& }{caption},\\
\param{const wxString\& }{client\_data[]},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
As {\bf wxGetSingleChoice} but takes an array of client data pointers
corresponding to the strings, and returns one of these pointers or NULL if
<wx/choicdlg.h>
+\perlnote{In wxPerl there is just an array reference in place of {\tt n}
+and {\tt choices}, and the client data array must have the
+same length as the choices array.}
+
+
+\membersection{::wxIsBusy}\label{wxisbusy}
+
+\func{bool}{wxIsBusy}{\void}
+
+Returns true if between two \helpref{wxBeginBusyCursor}{wxbeginbusycursor} and\rtfsp
+\helpref{wxEndBusyCursor}{wxendbusycursor} calls.
+
+See also \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{::wxMessageBox}\label{wxmessagebox}
-\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK \pipe wxCENTRE},\\
+\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK},\\
\param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1}}
General purpose message dialog. {\it style} may be a bit list of the
\twocolitem{wxCANCEL}{Puts a Cancel button on the message box. May be combined with
wxYES\_NO or wxOK.}
\twocolitem{wxOK}{Puts an Ok button on the message box. May be combined with wxCANCEL.}
-\twocolitem{wxCENTRE}{Centres the text.}
\twocolitem{wxICON\_EXCLAMATION}{Displays an exclamation mark symbol.}
-\twocolitem{wxICON\_HAND}{Displays a hand symbol.}
+\twocolitem{wxICON\_HAND}{Displays an error symbol.}
+\twocolitem{wxICON\_ERROR}{Displays an error symbol - the same as wxICON\_HAND.}
\twocolitem{wxICON\_QUESTION}{Displays a question mark symbol.}
\twocolitem{wxICON\_INFORMATION}{Displays an information symbol.}
\end{twocollist}
int answer = wxMessageBox("Quit program?", "Confirm",
wxYES_NO | wxCANCEL, main_frame);
if (answer == wxYES)
- delete main_frame;
+ main_frame->Close();
...
\end{verbatim}
{\it message} may contain newline characters, in which case the
message will be split into separate lines, to cater for large messages.
-Under Windows, the native MessageBox function is used unless wxCENTRE
-is specified in the style, in which case a generic function is used.
-This is because the native MessageBox function cannot centre text.
-The symbols are not shown when the generic function is used.
-
\wxheading{Include files}
<wx/msgdlg.h>
+
\membersection{::wxShowTip}\label{wxshowtip}
\func{bool}{wxShowTip}{\param{wxWindow *}{parent},
\param{wxTipProvider *}{tipProvider},
- \param{bool }{showAtStartup = TRUE}}
+ \param{bool }{showAtStartup = true}}
-This function shows a "startup tip" to the user.
+This function shows a "startup tip" to the user. The return value is the
+state of the ``Show tips at startup'' checkbox.
\docparam{parent}{The parent window for the modal dialog}
\docparam{tipProvider}{An object which is used to get the text of the tips.
It may be created with the \helpref{wxCreateFileTipProvider}{wxcreatefiletipprovider} function.}
-\docparam{showAtStartup}{Should be TRUE if startup tips are shown, FALSE
+\docparam{showAtStartup}{Should be true if startup tips are shown, false
otherwise. This is used as the initial value for "Show tips at startup"
checkbox which is shown in the tips dialog.}
<wx/tipdlg.h>
+
+
+
+\section{Math functions}
+
+\wxheading{Include files}
+
+<wx/math.h>
+
+
+\membersection{wxFinite}\label{wxfinite}
+
+\func{int}{wxFinite}{\param{double }{x}}
+
+Returns a non-zero value if {\it x} is neither infinite or NaN (not a number),
+returns 0 otherwise.
+
+
+\membersection{wxIsNaN}\label{wxisnan}
+
+\func{bool}{wxIsNaN}{\param{double }{x}}
+
+Returns a non-zero value if {\it x} is NaN (not a number), returns 0
+otherwise.
+
+
+
+
\section{GDI functions}\label{gdifunctions}
The following are relevant to the GDI (Graphics Device Interface).
<wx/gdicmn.h>
-\membersection{::wxColourDisplay}
+
+\membersection{wxBITMAP}\label{wxbitmapmacro}
+
+\func{}{wxBITMAP}{bitmapName}
+
+This macro loads a bitmap from either application resources (on the platforms
+for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
+avoid using {\tt \#ifdef}s when creating bitmaps.
+
+\wxheading{See also}
+
+\helpref{Bitmaps and icons overview}{wxbitmapoverview},
+\helpref{wxICON}{wxiconmacro}
+
+\wxheading{Include files}
+
+<wx/gdicmn.h>
+
+
+\membersection{::wxClientDisplayRect}\label{wxclientdisplayrect}
+
+\func{void}{wxClientDisplayRect}{\param{int *}{x}, \param{int *}{y},
+\param{int *}{width}, \param{int *}{height}}
+
+\func{wxRect}{wxGetClientDisplayRect}{\void}
+
+Returns the dimensions of the work area on the display. On Windows
+this means the area not covered by the taskbar, etc. Other platforms
+are currently defaulting to the whole display until a way is found to
+provide this info for all window managers, etc.
+
+
+\membersection{::wxColourDisplay}\label{wxcolourdisplay}
\func{bool}{wxColourDisplay}{\void}
-Returns TRUE if the display is colour, FALSE otherwise.
+Returns true if the display is colour, false otherwise.
-\membersection{::wxDisplayDepth}
+
+\membersection{::wxDisplayDepth}\label{wxdisplaydepth}
\func{int}{wxDisplayDepth}{\void}
Returns the depth of the display (a value of 1 denotes a monochrome display).
-\membersection{::wxDisplaySize}
+
+\membersection{::wxDisplaySize}\label{wxdisplaysize}
\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
Returns the display size in pixels.
-\membersection{::wxDisplaySizeMM}
+
+\membersection{::wxDisplaySizeMM}\label{wxdisplaysizemm}
\func{void}{wxDisplaySizeMM}{\param{int *}{width}, \param{int *}{height}}
Returns the display size in millimeters.
+
+\membersection{::wxDROP\_ICON}\label{wxdropicon}
+
+\func{wxIconOrCursor}{wxDROP\_ICON}{\param{const char *}{name}}
+
+This macro creates either a cursor (MSW) or an icon (elsewhere) with the given
+name. Under MSW, the cursor is loaded from the resource file and the icon is
+loaded from XPM file under other platforms.
+
+This macro should be used with
+\helpref{wxDropSource constructor}{wxdropsourcewxdropsource}.
+
+\wxheading{Include files}
+
+<wx/dnd.h>
+
+
+\membersection{wxICON}\label{wxiconmacro}
+
+\func{}{wxICON}{iconName}
+
+This macro loads an icon from either application resources (on the platforms
+for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
+avoid using {\tt \#ifdef}s when creating icons.
+
+\wxheading{See also}
+
+\helpref{Bitmaps and icons overview}{wxbitmapoverview},
+\helpref{wxBITMAP}{wxbitmapmacro}
+
+\wxheading{Include files}
+
+<wx/gdicmn.h>
+
+
\membersection{::wxMakeMetafilePlaceable}\label{wxmakemetafileplaceable}
\func{bool}{wxMakeMetafilePlaceable}{\param{const wxString\& }{filename}, \param{int }{minX}, \param{int }{minY},
This function is only available under Windows.
+
\membersection{::wxSetCursor}\label{wxsetcursor}
\func{void}{wxSetCursor}{\param{wxCursor *}{cursor}}
Globally sets the cursor; only has an effect in Windows and GTK.
See also \helpref{wxCursor}{wxcursor}, \helpref{wxWindow::SetCursor}{wxwindowsetcursor}.
+
+
\section{Printer settings}\label{printersettings}
-These routines are obsolete and should no longer be used!
+{\bf NB:} These routines are obsolete and should no longer be used!
The following functions are used to control PostScript printing. Under
Windows, PostScript output can only be sent to a file.
<wx/dcps.h>
-\membersection{::wxGetPrinterCommand}
+
+\membersection{::wxGetPrinterCommand}\label{wxgetprintercommand}
\func{wxString}{wxGetPrinterCommand}{\void}
Gets the printer command used to print a file. The default is {\tt lpr}.
-\membersection{::wxGetPrinterFile}
+
+\membersection{::wxGetPrinterFile}\label{wxgetprinterfile}
\func{wxString}{wxGetPrinterFile}{\void}
Gets the PostScript output filename.
-\membersection{::wxGetPrinterMode}
+
+\membersection{::wxGetPrinterMode}\label{wxgetprintermode}
\func{int}{wxGetPrinterMode}{\void}
Gets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.
-\membersection{::wxGetPrinterOptions}
+
+\membersection{::wxGetPrinterOptions}\label{wxgetprinteroptions}
\func{wxString}{wxGetPrinterOptions}{\void}
Gets the additional options for the print command (e.g. specific printer). The default is nothing.
-\membersection{::wxGetPrinterOrientation}
+
+\membersection{::wxGetPrinterOrientation}\label{wxgetprinterorientation}
\func{int}{wxGetPrinterOrientation}{\void}
Gets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
-\membersection{::wxGetPrinterPreviewCommand}
+
+\membersection{::wxGetPrinterPreviewCommand}\label{wxgetprinterpreviewcommand}
\func{wxString}{wxGetPrinterPreviewCommand}{\void}
Gets the command used to view a PostScript file. The default depends on the platform.
-\membersection{::wxGetPrinterScaling}
+
+\membersection{::wxGetPrinterScaling}\label{wxgetprinterscaling}
\func{void}{wxGetPrinterScaling}{\param{float *}{x}, \param{float *}{y}}
Gets the scaling factor for PostScript output. The default is 1.0, 1.0.
-\membersection{::wxGetPrinterTranslation}
+
+\membersection{::wxGetPrinterTranslation}\label{wxgetprintertranslation}
\func{void}{wxGetPrinterTranslation}{\param{float *}{x}, \param{float *}{y}}
Gets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
-\membersection{::wxSetPrinterCommand}
+
+\membersection{::wxSetPrinterCommand}\label{wxsetprintercommand}
\func{void}{wxSetPrinterCommand}{\param{const wxString\& }{command}}
Sets the printer command used to print a file. The default is {\tt lpr}.
-\membersection{::wxSetPrinterFile}
+
+\membersection{::wxSetPrinterFile}\label{wxsetprinterfile}
\func{void}{wxSetPrinterFile}{\param{const wxString\& }{filename}}
Sets the PostScript output filename.
-\membersection{::wxSetPrinterMode}
+
+\membersection{::wxSetPrinterMode}\label{wxsetprintermode}
\func{void}{wxSetPrinterMode}{\param{int }{mode}}
Sets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.
-\membersection{::wxSetPrinterOptions}
+
+\membersection{::wxSetPrinterOptions}\label{wxsetprinteroptions}
\func{void}{wxSetPrinterOptions}{\param{const wxString\& }{options}}
Sets the additional options for the print command (e.g. specific printer). The default is nothing.
-\membersection{::wxSetPrinterOrientation}
+
+\membersection{::wxSetPrinterOrientation}\label{wxsetprinterorientation}
\func{void}{wxSetPrinterOrientation}{\param{int}{ orientation}}
Sets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
-\membersection{::wxSetPrinterPreviewCommand}
+
+\membersection{::wxSetPrinterPreviewCommand}\label{wxsetprinterpreviewcommand}
\func{void}{wxSetPrinterPreviewCommand}{\param{const wxString\& }{command}}
Sets the command used to view a PostScript file. The default depends on the platform.
-\membersection{::wxSetPrinterScaling}
+
+\membersection{::wxSetPrinterScaling}\label{wxsetprinterscaling}
\func{void}{wxSetPrinterScaling}{\param{float }{x}, \param{float }{y}}
Sets the scaling factor for PostScript output. The default is 1.0, 1.0.
-\membersection{::wxSetPrinterTranslation}
+
+\membersection{::wxSetPrinterTranslation}\label{wxsetprintertranslation}
\func{void}{wxSetPrinterTranslation}{\param{float }{x}, \param{float }{y}}
Sets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
+
+
\section{Clipboard functions}\label{clipsboard}
These clipboard functions are implemented for Windows only. The use of these functions
-is deprecated and the code is no longer maintained. Use the \helpref{wxClipboard}{wxclipboard}
+is deprecated and the code is no longer maintained. Use the \helpref{wxClipboard}{wxclipboard}
class instead.
\wxheading{Include files}
<wx/clipbrd.h>
-\membersection{::wxClipboardOpen}
+
+\membersection{::wxClipboardOpen}\label{functionwxclipboardopen}
\func{bool}{wxClipboardOpen}{\void}
-Returns TRUE if this application has already opened the clipboard.
+Returns true if this application has already opened the clipboard.
+
-\membersection{::wxCloseClipboard}
+\membersection{::wxCloseClipboard}\label{wxcloseclipboard}
\func{bool}{wxCloseClipboard}{\void}
Closes the clipboard to allow other applications to use it.
-\membersection{::wxEmptyClipboard}
+
+\membersection{::wxEmptyClipboard}\label{wxemptyclipboard}
\func{bool}{wxEmptyClipboard}{\void}
Empties the clipboard.
-\membersection{::wxEnumClipboardFormats}
+
+\membersection{::wxEnumClipboardFormats}\label{wxenumclipboardformats}
\func{int}{wxEnumClipboardFormats}{\param{int}{dataFormat}}
Enumerates the formats found in a list of available formats that belong
to the clipboard. Each call to this function specifies a known
available format; the function returns the format that appears next in
-the list.
+the list.
{\it dataFormat} specifies a known format. If this parameter is zero,
-the function returns the first format in the list.
+the function returns the first format in the list.
The return value specifies the next known clipboard data format if the
function is successful. It is zero if the {\it dataFormat} parameter specifies
the last format in the list of available formats, or if the clipboard
-is not open.
+is not open.
-Before it enumerates the formats function, an application must open the clipboard by using the
-wxOpenClipboard function.
+Before it enumerates the formats function, an application must open the clipboard by using the
+wxOpenClipboard function.
-\membersection{::wxGetClipboardData}
+
+\membersection{::wxGetClipboardData}\label{wxgetclipboarddata}
\func{wxObject *}{wxGetClipboardData}{\param{int}{dataFormat}}
The clipboard must have previously been opened for this call to succeed.
-\membersection{::wxGetClipboardFormatName}
+
+\membersection{::wxGetClipboardFormatName}\label{wxgetclipboardformatname}
\func{bool}{wxGetClipboardFormatName}{\param{int}{dataFormat}, \param{const wxString\& }{formatName}, \param{int}{maxCount}}
Gets the name of a registered clipboard format, and puts it into the buffer {\it formatName} which is of maximum
length {\it maxCount}. {\it dataFormat} must not specify a predefined clipboard format.
-\membersection{::wxIsClipboardFormatAvailable}
+
+\membersection{::wxIsClipboardFormatAvailable}\label{wxisclipboardformatavailable}
\func{bool}{wxIsClipboardFormatAvailable}{\param{int}{dataFormat}}
-Returns TRUE if the given data format is available on the clipboard.
+Returns true if the given data format is available on the clipboard.
+
-\membersection{::wxOpenClipboard}
+\membersection{::wxOpenClipboard}\label{wxopenclipboard}
\func{bool}{wxOpenClipboard}{\void}
Opens the clipboard for passing data to it or getting data from it.
-\membersection{::wxRegisterClipboardFormat}
+
+\membersection{::wxRegisterClipboardFormat}\label{wxregisterclipboardformat}
\func{int}{wxRegisterClipboardFormat}{\param{const wxString\& }{formatName}}
Registers the clipboard data format name and returns an identifier.
-\membersection{::wxSetClipboardData}
+
+\membersection{::wxSetClipboardData}\label{wxsetclipboarddata}
\func{bool}{wxSetClipboardData}{\param{int}{dataFormat}, \param{wxObject *}{data}, \param{int}{width}, \param{int}{height}}
\item wxCF\_METAFILE: {\it data} is a wxMetafile. {\it width} and {\it height} are used to give recommended dimensions.
\end{itemize}
-The clipboard must have previously been opened for this call to succeed.
-
-\section{Miscellaneous functions}\label{miscellany}
-
-\membersection{::wxDROP\_ICON}\label{wxdropicon}
-
-\func{wxIconOrCursor}{wxDROP\_ICON}{\param{const char *}{name}}
-
-This macro creates either a cursor (MSW) or an icon (elsewhere) with the given
-name. Under MSW, the cursor is loaded from the resource file and the icon is
-loaded from XPM file under other platforms.
-
-This macro should be used with
-\helpref{wxDropSource constructor}{wxdropsourcewxdropsource}.
-
-\wxheading{Include files}
-
-<wx/dnd.h>
-
-\membersection{::wxNewId}
-
-\func{long}{wxNewId}{\void}
-
-Generates an integer identifier unique to this run of the program.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxRegisterId}
-
-\func{void}{wxRegisterId}{\param{long}{ id}}
-
-Ensures that ids subsequently generated by {\bf NewId} do not clash with
-the given {\bf id}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
-
-\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
-
-Changes the cursor to the given cursor for all windows in the application.
-Use \helpref{wxEndBusyCursor}{wxendbusycursor} to revert the cursor back
-to its previous state. These two calls can be nested, and a counter
-ensures that only the outer calls take effect.
-
-See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxBell}
-
-\func{void}{wxBell}{\void}
-
-Ring the system bell.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
-
-\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
-
-Creates and returns an object of the given class, if the class has been
-registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
-
-\membersection{::wxDDECleanUp}\label{wxddecleanup}
-
-\func{void}{wxDDECleanUp}{\void}
-
-Called when wxWindows exits, to clean up the DDE system. This no longer needs to be
-called by the application.
-
-See also \helpref{wxDDEInitialize}{wxddeinitialize}.
-
-\wxheading{Include files}
-
-<wx/dde.h>
-
-\membersection{::wxDDEInitialize}\label{wxddeinitialize}
-
-\func{void}{wxDDEInitialize}{\void}
-
-Initializes the DDE system. May be called multiple times without harm.
-
-This no longer needs to be called by the application: it will be called
-by wxWindows if necessary.
-
-See also \helpref{wxDDEServer}{wxddeserver}, \helpref{wxDDEClient}{wxddeclient}, \helpref{wxDDEConnection}{wxddeconnection},
-\helpref{wxDDECleanUp}{wxddecleanup}.
-
-\wxheading{Include files}
-
-<wx/dde.h>
-
-\membersection{::wxDebugMsg}\label{wxdebugmsg}
-
-\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
-
-{\bf This function is deprecated, use \helpref{wxLogDebug}{wxlogdebug} instead!}
-
-Display a debugging message; under Windows, this will appear on the
-debugger command window, and under Unix, it will be written to standard
-error.
+The clipboard must have previously been opened for this call to succeed.
-The syntax is identical to {\bf printf}: pass a format string and a
-variable list of arguments.
-{\bf Tip:} under Windows, if your application crashes before the
-message appears in the debugging window, put a wxYield call after
-each wxDebugMsg call. wxDebugMsg seems to be broken under WIN32s
-(at least for Watcom C++): preformat your messages and use OutputDebugString
-instead.
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-\wxheading{Include files}
+\section{Miscellaneous functions}\label{miscellany}
-<wx/utils.h>
-\membersection{::wxDisplaySize}
+\membersection{wxCONCAT}\label{wxconcat}
-\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
+\func{}{wxCONCAT}{\param{}{x}, \param{}{y}}
-Gets the physical size of the display in pixels.
+This macro returns the concatenation of two tokens \arg{x} and \arg{y}.
-\wxheading{Include files}
-<wx/gdicmn.h>
+\membersection{wxDYNLIB\_FUNCTION}\label{wxdynlibfunction}
-\membersection{::wxEnableTopLevelWindows}\label{wxenabletoplevelwindows}
+\func{}{wxDYNLIB\_FUNCTION}{\param{}{type}, \param{}{name}, \param{}{dynlib}}
-\func{void}{wxEnableTopLevelWindow}{\param{bool}{ enable = TRUE}}
+When loading a function from a DLL you always have to cast the returned
+\tt{void *} pointer to the correct type and, even more annoyingly, you have to
+repeat this type twice if you want to declare and define a function pointer all
+in one line
-This function enables or disables all top level windows. It is used by
-\helpref{::wxSafeYield}{wxsafeyield}.
+This macro makes this slightly less painful by allowing you to specify the
+type only once, as the first parameter, and creating a variable of this type
+named after the function but with {\tt pfn} prefix and initialized with the
+function \arg{name} from the \helpref{wxDynamicLibrary}{wxdynamiclibrary}
+\arg{dynlib}.
-\wxheading{Include files}
+\wxheading{Parameters}
-<wx/utils.h>
+\docparam{type}{the type of the function}
-\membersection{::wxEntry}\label{wxentry}
+\docparam{name}{the name of the function to load, not a string (without quotes,
+it is quoted automatically by the macro)}
-This initializes wxWindows in a platform-dependent way. Use this if you
-are not using the default wxWindows entry code (e.g. main or WinMain). For example,
-you can initialize wxWindows from an Microsoft Foundation Classes application using
-this function.
+\docparam{dynlib}{the library to load the function from}
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = TRUE}}
-wxWindows initialization under Windows (non-DLL). If {\it enterLoop} is FALSE, the
-function will return immediately after calling wxApp::OnInit. Otherwise, the wxWindows
-message loop will be entered.
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
+\membersection{wxEXPLICIT}\label{wxexplicit}
-wxWindows initialization under Windows (for applications constructed as a DLL).
+{\tt wxEXPLICIT} is a macro which expands to the C++ {\tt explicit} keyword if
+the compiler supports it or nothing otherwise. Thus, it can be used even in the
+code which might have to be compiled with an old compiler without support for
+this language feature but still take advantage of it when it is available.
-\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
-wxWindows initialization under Unix.
+\membersection{wxLL}\label{wxll}
-\wxheading{Remarks}
+\func{wxLongLong\_t}{wxLL}{\param{}{number}}
-To clean up wxWindows, call wxApp::OnExit followed by the static function
-wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWindows:
+This macro is defined for the platforms with a native 64 bit integer type and
+allows to define 64 bit compile time constants:
\begin{verbatim}
-int CTheApp::ExitInstance()
-{
- // OnExit isn't called by CleanUp so must be called explicitly.
- wxTheApp->OnExit();
- wxApp::CleanUp();
-
- return CWinApp::ExitInstance();
-}
+ #ifdef wxLongLong_t
+ wxLongLong_t ll = wxLL(0x1234567890abcdef);
+ #endif
\end{verbatim}
\wxheading{Include files}
-<wx/app.h>
+<wx/longlong.h>
-\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
+\wxheading{See also}
-\func{void}{wxEndBusyCursor}{\void}
+\helpref{wxULL}{wxull}, \helpref{wxLongLong}{wxlonglong}
-Changes the cursor back to the original cursor, for all windows in the application.
-Use with \helpref{wxBeginBusyCursor}{wxbeginbusycursor}.
-See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+\membersection{wxLongLongFmtSpec}\label{wxlonglongfmtspec}
+
+This macro is defined to contain the {\tt printf()} format specifier using
+which 64 bit integer numbers (i.e. those of type {\tt wxLongLong\_t}) can be
+printed. Example of using it:
+
+\begin{verbatim}
+ #ifdef wxLongLong_t
+ wxLongLong_t ll = wxLL(0x1234567890abcdef);
+ printf("Long long = %" wxLongLongFmtSpec "x\n", ll);
+ #endif
+\end{verbatim}
+
+\wxheading{See also}
+
+\helpref{wxLL}{wxll}
\wxheading{Include files}
-<wx/utils.h>
+<wx/longlong.h>
-\membersection{::wxError}\label{wxerror}
-\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Internal Error"}}
+\membersection{::wxNewId}\label{wxnewid}
-Displays {\it msg} and continues. This writes to standard error under
-Unix, and pops up a message box under Windows. Used for internal
-wxWindows errors. See also \helpref{wxFatalError}{wxfatalerror}.
+\func{long}{wxNewId}{\void}
+
+Generates an integer identifier unique to this run of the program.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxExecute}\label{wxexecute}
-
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
-\func{long}{wxExecute}{\param{char **}{argv}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
+\membersection{::wxRegisterId}\label{wxregisterid}
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}}
+\func{void}{wxRegisterId}{\param{long}{ id}}
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}}
+Ensures that ids subsequently generated by {\bf NewId} do not clash with
+the given {\bf id}.
-Executes another program in Unix or Windows.
+\wxheading{Include files}
-The first form takes a command string, such as {\tt "emacs file.txt"}.
+<wx/utils.h>
-The second form takes an array of values: a command, any number of
-arguments, terminated by NULL.
-The semantics of the third and fourth versions is different from the first two
-and is described in more details below.
+\membersection{::wxDDECleanUp}\label{wxddecleanup}
-If {\it sync} is FALSE (the default), flow of control immediately returns.
-If TRUE, the current application waits until the other program has terminated.
+\func{void}{wxDDECleanUp}{\void}
-In the case of synchronous execution, the return value is the exit code of
-the process (which terminates by the moment the function returns) and will be
-$-1$ if the process couldn't be started and typically 0 if the process
-terminated successfully. Also, while waiting for the process to
-terminate, wxExecute will call \helpref{wxYield}{wxyield}. The caller
-should ensure that this can cause no recursion, in the simplest case by
-calling \helpref{wxEnableTopLevelWindows(FALSE)}{wxenabletoplevelwindows}.
+Called when wxWindows exits, to clean up the DDE system. This no longer needs to be
+called by the application.
-For asynchronous execution, however, the return value is the process id and
-zero value indicates that the command could not be executed.
+See also \helpref{wxDDEInitialize}{wxddeinitialize}.
-If callback isn't NULL and if execution is asynchronous (note that callback
-parameter can not be non-NULL for synchronous execution),
-\helpref{wxProcess::OnTerminate}{wxprocessonterminate} will be called when
-the process finishes.
+\wxheading{Include files}
-Finally, you may use the third overloaded version of this function to execute
-a process (always synchronously) and capture its output in the array
-{\it output}. The fourth version adds the possibility to additionally capture
-the messages from standard error output in the {\it errors} array.
+<wx/dde.h>
-See also \helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess},
-\helpref{Exec sample}{sampleexec}.
-\wxheading{Include files}
+\membersection{::wxDDEInitialize}\label{wxddeinitialize}
-<wx/utils.h>
+\func{void}{wxDDEInitialize}{\void}
-\membersection{::wxExit}\label{wxexit}
+Initializes the DDE system. May be called multiple times without harm.
-\func{void}{wxExit}{\void}
+This no longer needs to be called by the application: it will be called
+by wxWindows if necessary.
-Exits application after calling \helpref{wxApp::OnExit}{wxapponexit}.
-Should only be used in an emergency: normally the top-level frame
-should be deleted (after deleting all other frames) to terminate the
-application. See \helpref{wxWindow::OnCloseWindow}{wxwindowonclosewindow} and \helpref{wxApp}{wxapp}.
+See also \helpref{wxDDEServer}{wxddeserver}, \helpref{wxDDEClient}{wxddeclient}, \helpref{wxDDEConnection}{wxddeconnection},
+\helpref{wxDDECleanUp}{wxddecleanup}.
\wxheading{Include files}
-<wx/app.h>
+<wx/dde.h>
-\membersection{::wxFatalError}\label{wxfatalerror}
-\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Fatal Error"}}
+\membersection{::wxEnableTopLevelWindows}\label{wxenabletoplevelwindows}
-Displays {\it msg} and exits. This writes to standard error under Unix,
-and pops up a message box under Windows. Used for fatal internal
-wxWindows errors. See also \helpref{wxError}{wxerror}.
+\func{void}{wxEnableTopLevelWindow}{\param{bool}{ enable = true}}
+
+This function enables or disables all top level windows. It is used by
+\helpref{::wxSafeYield}{wxsafeyield}.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxFindMenuItemId}
+
+\membersection{::wxFindMenuItemId}\label{wxfindmenuitemid}
\func{int}{wxFindMenuItemId}{\param{wxFrame *}{frame}, \param{const wxString\& }{menuString}, \param{const wxString\& }{itemString}}
<wx/utils.h>
+
\membersection{::wxFindWindowByLabel}\label{wxfindwindowbylabel}
\func{wxWindow *}{wxFindWindowByLabel}{\param{const wxString\& }{label}, \param{wxWindow *}{parent=NULL}}
+{\bf NB:} This function is obsolete, please use
+\helpref{wxWindow::FindWindowByLabel}{wxwindowfindwindowbylabel} instead.
+
Find a window by its label. Depending on the type of window, the label may be a window title
or panel item label. If {\it parent} is NULL, the search will start from all top-level
frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
<wx/utils.h>
+
\membersection{::wxFindWindowByName}\label{wxfindwindowbyname}
\func{wxWindow *}{wxFindWindowByName}{\param{const wxString\& }{name}, \param{wxWindow *}{parent=NULL}}
+{\bf NB:} This function is obsolete, please use
+\helpref{wxWindow::FindWindowByName}{wxwindowfindwindowbyname} instead.
+
Find a window by its name (as given in a window constructor or {\bf Create} function call).
If {\it parent} is NULL, the search will start from all top-level
frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
<wx/utils.h>
+
\membersection{::wxFindWindowAtPoint}\label{wxfindwindowatpoint}
\func{wxWindow *}{wxFindWindowAtPoint}{\param{const wxPoint\& }{pt}}
Find the deepest window at the given mouse position in screen coordinates,
returning the window if found, or NULL if not.
+
\membersection{::wxFindWindowAtPointer}\label{wxfindwindowatpointer}
\func{wxWindow *}{wxFindWindowAtPointer}{\param{wxPoint\& }{pt}}
Find the deepest window at the mouse pointer position, returning the window
and current pointer position in screen coordinates.
+
\membersection{::wxGetActiveWindow}\label{wxgetactivewindow}
\func{wxWindow *}{wxGetActiveWindow}{\void}
<wx/windows.h>
+
\membersection{::wxGetDisplayName}\label{wxgetdisplayname}
\func{wxString}{wxGetDisplayName}{\void}
<wx/utils.h>
-\membersection{::wxGetHomeDir}\label{wxgethomedir}
-
-\func{wxString}{wxGetHomeDir}{\void}
-
-Return the (current) user's home directory.
-
-\wxheading{See also}
-
-\helpref{wxGetUserHome}{wxgetuserhome}
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
-
-\func{long}{wxGetFreeMemory}{\void}
-
-Returns the amount of free memory in bytes under environments which
-support it, and -1 if not supported. Currently, it is supported only
-under Windows, Linux and Solaris.
-
-\wxheading{Include files}
-
-<wx/utils.h>
\membersection{::wxGetMousePosition}\label{wxgetmouseposition}
<wx/utils.h>
-\membersection{::wxGetOsDescription}\label{wxgetosdescription}
-
-\func{wxString}{wxGetOsDescription}{\void}
-
-Returns the string containing the description of the current platform in a
-user-readable form. For example, this function may return strings like
-{\tt Windows NT Version 4.0} or {\tt Linux 2.2.2 i386}.
-
-\wxheading{See also}
-
-\helpref{::wxGetOsVersion}{wxgetosversion}
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetOsVersion}\label{wxgetosversion}
-
-\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
-
-Gets operating system version information.
-
-\begin{twocollist}\itemsep=0pt
-\twocolitemruled{Platform}{Return types}
-\twocolitem{Macintosh}{Return value is wxMACINTOSH.}
-\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
-\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
-\twocolitem{OS/2}{Return value is wxOS2\_PM.}
-\twocolitem{Windows 3.1}{Return value is wxWINDOWS, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Windows NT/2000}{Return value is wxWINDOWS\_NT, version is returned in {\it major} and {\it minor}}
-\twocolitem{Windows 98}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 1 or greater.}
-\twocolitem{Windows 95}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 0.}
-\twocolitem{Win32s (Windows 3.1)}{Return value is wxWIN32S, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Watcom C++ 386 supervisor mode (Windows 3.1)}{Return value is wxWIN386, {\it major} is 3, {\it minor} is 1.}
-\end{twocollist}
-
-\wxheading{See also}
-
-\helpref{::wxGetOsDescription}{wxgetosdescription}
-
-\wxheading{Include files}
-
-<wx/utils.h>
\membersection{::wxGetResource}\label{wxgetresource}
<wx/utils.h>
-\membersection{::wxGetUserId}
-
-\func{bool}{wxGetUserId}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
-
-Copies the user's login identity (such as ``jacs'') into the buffer {\it
-buf}, of maximum size {\it bufSize}, returning TRUE if successful.
-Under Windows, this returns ``user''.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetUserHome}\label{wxgetuserhome}
-
-\func{const wxChar *}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
-
-Returns the home directory for the given user. If the username is empty
-(default value), this function behaves like
-\helpref{wxGetHomeDir}{wxgethomedir}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxGetUserName}
-
-\func{bool}{wxGetUserName}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
-
-Copies the user's name (such as ``Julian Smart'') into the buffer {\it
-buf}, of maximum size {\it bufSize}, returning TRUE if successful.
-Under Windows, this returns ``unknown''.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
-
-\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = TRUE}}
-
-If {\it doIt} is TRUE, the fatal exceptions (also known as general protection
-faults under Windows or segmentation violations in the Unix world) will be
-caught and passed to \helpref{wxApp::OnFatalException}{wxapponfatalexception}.
-By default, i.e. before this function is called, they will be handled in the
-normal way which usually just means that the application will be terminated.
-Calling wxHandleFatalExceptions() with {\it doIt} equal to FALSE will restore
-this default behaviour.
-
-\membersection{::wxKill}\label{wxkill}
-
-\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig}}
-
-Under Unix (the only supported platform), equivalent to the Unix kill function.
-Returns 0 on success, -1 on failure.
-
-Tip: sending a signal of 0 to a process returns -1 if the process does not exist.
-It does not raise a signal in the receiving process.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxInitAllImageHandlers}\label{wxinitallimagehandlers}
-
-\func{void}{wxInitAllImageHandlers}{\void}
-
-Initializes all available image handlers. For a list of available handlers,
-see \helpref{wxImage}{wximage}.
-\wxheading{See also}
-
-\helpref{wxImage}{wximage}, \helpref{wxImageHandler}{wximagehandler}
-
-\membersection{::wxIsBusy}\label{wxisbusy}
-
-\func{bool}{wxIsBusy}{\void}
+\membersection{::wxGetTopLevelParent}\label{wxgettoplevelparent}
-Returns TRUE if between two \helpref{wxBeginBusyCursor}{wxbeginbusycursor} and\rtfsp
-\helpref{wxEndBusyCursor}{wxendbusycursor} calls.
+\func{wxWindow *}{wxGetTopLevelParent}{\param{wxWindow }{*win}}
-See also \helpref{wxBusyCursor}{wxbusycursor}.
+Returns the first top level parent of the given window, or in other words, the
+frame or dialog containing it, or {\tt NULL}.
\wxheading{Include files}
-<wx/utils.h>
+<wx/window.h>
+
\membersection{::wxLoadUserResource}\label{wxloaduserresource}
where {\tt file.ext} is a file that the resource compiler can find.
-One use of this is to store {\tt .wxr} files instead of including the data in the C++ file; some compilers
-cannot cope with the long strings in a {\tt .wxr} file. The resource data can then be parsed
-using \helpref{wxResourceParseString}{wxresourceparsestring}.
-
This function is available under Windows only.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxNow}\label{wxnow}
-
-\func{wxString}{wxNow}{\void}
-
-Returns a string representing the current date and time.
-
-\wxheading{Include files}
-
-<wx/utils.h>
\membersection{::wxPostDelete}\label{wxpostdelete}
<wx/utils.h>
+
\membersection{::wxPostEvent}\label{wxpostevent}
\func{void}{wxPostEvent}{\param{wxEvtHandler *}{dest}, \param{wxEvent\& }{event}}
-This function posts the event to the specified {\it dest} object. The
-difference between sending an event and posting it is that in the first case
-the event is processed before the function returns (in wxWindows, event sending
-is done with \helpref{ProcessEvent}{wxevthandlerprocessevent} function), but in
-the second, the function returns immediately and the event will be processed
-sometime later - usually during the next even loop iteration.
-
-Note that a copy of the {\it event} is made by the function, so the original
-copy can be deleted as soon as function returns. This function can also be used
-to send events between different threads safely. As this function makes a
-copy of the event, the event needs to have a fully implemented Clone() method,
-which may not be the case for all event in wxWindows.
-
-See also \helpref{AddPendingEvent}{wxevthandleraddpendingevent} (which this function
-uses internally).
+In a GUI application, this function posts {\it event} to the specified {\it dest}
+object using \helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
+Otherwise, it dispatches {\it event} immediately using
+\helpref{wxEvtHandler::ProcessEvent}{wxevthandlerprocessevent}.
+See the respective documentation for details (and caveats).
\wxheading{Include files}
<wx/app.h>
-\membersection{::wxSafeYield}\label{wxsafeyield}
-
-\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}}
-
-This function is similar to wxYield, except that it disables the user input to
-all program windows before calling wxYield and re-enables it again
-afterwards. If {\it win} is not NULL, this window will remain enabled,
-allowing the implementation of some limited user interaction.
-
-Returns the result of the call to \helpref{::wxYield}{wxyield}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
\membersection{::wxSetDisplayName}\label{wxsetdisplayname}
<wx/utils.h>
-\membersection{::wxShell}\label{wxshell}
-
-\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
-
-Executes a command in an interactive shell window. If no command is
-specified, then just the shell is spawned.
-
-See also \helpref{wxExecute}{wxexecute}, \helpref{Exec sample}{sampleexec}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxSleep}\label{wxsleep}
-
-\func{void}{wxSleep}{\param{int}{ secs}}
-
-Sleeps for the specified number of seconds.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-\membersection{::wxStripMenuCodes}
+\membersection{::wxStripMenuCodes}\label{wxstripmenucodes}
\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{in}}
-\func{void}{wxStripMenuCodes}{\param{char* }{in}, \param{char* }{out}}
+\func{void}{wxStripMenuCodes}{\param{char *}{in}, \param{char *}{out}}
+
+{\bf NB:} This function is obsolete, please use
+\helpref{wxMenuItem::GetLabelFromText}{wxmenuitemgetlabelfromtext} instead.
Strips any menu codes from {\it in} and places the result
in {\it out} (or returns the new string, in the first form).
<wx/utils.h>
-\membersection{::wxToLower}\label{wxtolower}
-
-\func{char}{wxToLower}{\param{char }{ch}}
-
-Converts the character to lower case. This is implemented as a macro for efficiency.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxToUpper}\label{wxtoupper}
-
-\func{char}{wxToUpper}{\param{char }{ch}}
-
-Converts the character to upper case. This is implemented as a macro for efficiency.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxTrace}\label{wxtrace}
-
-\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
-
-Takes printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\membersection{::wxTraceLevel}\label{wxtracelevel}
+\membersection{wxULL}\label{wxull}
-\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
+\func{wxLongLong\_t}{wxULL}{\param{}{number}}
-Takes printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-The first argument should be the level at which this information is appropriate.
-It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
-this value.
+This macro is defined for the platforms with a native 64 bit integer type and
+allows to define unsigned 64 bit compile time constants:
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+\begin{verbatim}
+ #ifdef wxLongLong_t
+ unsigned wxLongLong_t ll = wxULL(0x1234567890abcdef);
+ #endif
+\end{verbatim}
\wxheading{Include files}
-<wx/memory.h>
-
-\membersection{::wxUsleep}\label{wxusleep}
-
-\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
+<wx/longlong.h>
-Sleeps for the specified number of milliseconds. Notice that usage of this
-function is encouraged instead of calling usleep(3) directly because the
-standard usleep() function is not MT safe.
+\wxheading{See also}
-\wxheading{Include files}
+\helpref{wxLL}{wxll}, \helpref{wxLongLong}{wxlonglong}
-<wx/utils.h>
\membersection{::wxWriteResource}\label{wxwriteresource}
<wx/utils.h>
-\membersection{::wxYield}\label{wxyield}
-
-\func{bool}{wxYield}{\void}
-
-Yields control to pending messages in the windowing system. This can be useful, for example, when a
-time-consuming process writes to a text window. Without an occasional
-yield, the text window will not be updated properly, and on systems with
-cooperative multitasking, such as Windows 3.1 other processes will not respond.
-
-Caution should be exercised, however, since yielding may allow the
-user to perform actions which are not compatible with the current task.
-Disabling menu items or whole menus during processing can avoid unwanted
-reentrance of code: see \helpref{::wxSafeYield}{wxsafeyield} for a better
-function.
-
-Note that wxYield will not flush the message logs. This is intentional as
-calling wxYield is usually done to quickly update the screen and popping up a
-message box dialog may be undesirable. If you do wish to flush the log
-messages immediately (otherwise it will be done during the next idle loop
-iteration), call \helpref{wxLog::FlushActive}{wxlogflushactive}.
-
-\wxheading{Include files}
-
-<wx/app.h> or <wx/utils.h>
-
-\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
-
-\func{void}{wxWakeUpIdle}{\void}
-
-This functions wakes up the (internal and platform dependent) idle system, i.e. it
-will force the system to send an idle event even if the system currently {\it is}
- idle and thus would not send any idle event until after some other event would get
-sent. This is also useful for sending events between two threads and is used by
-the corresponding functions \helpref{::wxPostEvent}{wxpostevent} and
-\helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
-\wxheading{Include files}
-<wx/app.h>
+\section{Byte order macros}\label{byteordermacros}
-\section{Macros}\label{macros}
+The endian-ness issues (that is the difference between big-endian and
+little-endian architectures) are important for the portable programs working
+with the external binary data (for example, data files or data coming from
+network) which is usually in some fixed, platform-independent format. The
+macros are helpful for transforming the data to the correct format.
-These macros are defined in wxWindows.
\membersection{wxINTXX\_SWAP\_ALWAYS}\label{intswapalways}
\func{wxUint16}{wxUINT16\_SWAP\_ALWAYS}{\param{wxUint16 }{value}}
-This macro will swap the bytes of the {\it value} variable from little
-endian to big endian or vice versa.
+These macros will swap the bytes of the {\it value} variable from little
+endian to big endian or vice versa unconditionally, i.e. independently of the
+current platform.
+
\membersection{wxINTXX\_SWAP\_ON\_BE}\label{intswaponbe}
This macro will swap the bytes of the {\it value} variable from little
endian to big endian or vice versa if the program is compiled on a
-big-endian architecture (such as Sun work stations). If the program has
+big-endian architecture (such as Sun work stations). If the program has
been compiled on a little-endian architecture, the value will be unchanged.
-Use these macros to read data from and write data to a file that stores
-data in little endian (Intel i386) format.
+Use these macros to read data from and write data to a file that stores
+data in little-endian (for example Intel i386) format.
+
\membersection{wxINTXX\_SWAP\_ON\_LE}\label{intswaponle}
This macro will swap the bytes of the {\it value} variable from little
endian to big endian or vice versa if the program is compiled on a
-little-endian architecture (such as Intel PCs). If the program has
+little-endian architecture (such as Intel PCs). If the program has
been compiled on a big-endian architecture, the value will be unchanged.
-Use these macros to read data from and write data to a file that stores
-data in big endian format.
+Use these macros to read data from and write data to a file that stores
+data in big-endian format.
+
+
+
+\section{RTTI functions}\label{rttimacros}
+
+wxWindows uses its own RTTI ("run-time type identification") system which
+predates the current standard C++ RTTI and so is kept for backwards
+compatibility reasons but also because it allows some things which the
+standard RTTI doesn't directly support (such as creating a class from its
+name).
+
+The standard C++ RTTI can be used in the user code without any problems and in
+general you shouldn't need to use the functions and the macros in this section
+unless you are thinking of modifying or adding any wxWindows classes.
+
+\wxheading{See also}
+
+\helpref{RTTI overview}{runtimeclassoverview}
+
\membersection{CLASSINFO}\label{classinfo}
<wx/object.h>
-\membersection{DECLARE\_ABSTRACT\_CLASS}
+
+\membersection{DECLARE\_ABSTRACT\_CLASS}\label{declareabstractclass}
\func{}{DECLARE\_ABSTRACT\_CLASS}{className}
<wx/object.h>
+
\membersection{DECLARE\_APP}\label{declareapp}
\func{}{DECLARE\_APP}{className}
-This is used in headers to create a forward declaration of the wxGetApp function implemented
-by IMPLEMENT\_APP. It creates the declaration {\tt className\& wxGetApp(void)}.
+This is used in headers to create a forward declaration of the
+\helpref{wxGetApp}{wxgetapp} function implemented by
+\helpref{IMPLEMENT\_APP}{implementapp}. It creates the declaration
+{\tt className\& wxGetApp(void)}.
Example:
<wx/app.h>
-\membersection{DECLARE\_CLASS}
+
+\membersection{DECLARE\_CLASS}\label{declareclass}
\func{}{DECLARE\_CLASS}{className}
<wx/object.h>
-\membersection{DECLARE\_DYNAMIC\_CLASS}
+
+\membersection{DECLARE\_DYNAMIC\_CLASS}\label{declaredynamicclass}
\func{}{DECLARE\_DYNAMIC\_CLASS}{className}
DECLARE_DYNAMIC_CLASS(wxFrame)
private:
- const wxString\& frameTitle;
+ const wxString& frameTitle;
public:
...
};
<wx/object.h>
-\membersection{IMPLEMENT\_ABSTRACT\_CLASS}
+
+\membersection{IMPLEMENT\_ABSTRACT\_CLASS}\label{implementabstractclass}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}
+
+\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}\label{implementabstractclass2}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
+
\membersection{IMPLEMENT\_APP}\label{implementapp}
\func{}{IMPLEMENT\_APP}{className}
<wx/app.h>
-\membersection{IMPLEMENT\_CLASS}
+
+\membersection{IMPLEMENT\_CLASS}\label{implementclass}
\func{}{IMPLEMENT\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_CLASS2}
+
+\membersection{IMPLEMENT\_CLASS2}\label{implementclass2}
\func{}{IMPLEMENT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
-\membersection{IMPLEMENT\_DYNAMIC\_CLASS}
+
+\membersection{IMPLEMENT\_DYNAMIC\_CLASS}\label{implementdynamicclass}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}
+
+\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}\label{implementdynamicclass2}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
-\membersection{wxBITMAP}\label{wxbitmapmacro}
-
-\func{}{wxBITMAP}{bitmapName}
-
-This macro loads a bitmap from either application resources (on the platforms
-for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
-avoid using {\tt \#ifdef}s when creating bitmaps.
-
-\wxheading{See also}
-
-\helpref{Bitmaps and icons overview}{wxbitmapoverview},
-\helpref{wxICON}{wxiconmacro}
-
-\wxheading{Include files}
-
-<wx/gdicmn.h>
\membersection{wxConstCast}\label{wxconstcast}
-\func{}{wxConstCast}{ptr, classname}
+\func{classname *}{wxConstCast}{ptr, classname}
This macro expands into {\tt const\_cast<classname *>(ptr)} if the compiler
supports {\it const\_cast} or into an old, C-style cast, otherwise.
\helpref{wxDynamicCast}{wxdynamiccast}\\
\helpref{wxStaticCast}{wxstaticcast}
+
+\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
+
+\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
+
+Creates and returns an object of the given class, if the class has been
+registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
+
+
\membersection{WXDEBUG\_NEW}\label{debugnew}
\func{}{WXDEBUG\_NEW}{arg}
<wx/object.h>
+
\membersection{wxDynamicCast}\label{wxdynamiccast}
-\func{}{wxDynamicCast}{ptr, classname}
+\func{classname *}{wxDynamicCast}{ptr, classname}
This macro returns the pointer {\it ptr} cast to the type {\it classname *} if
-the pointer is of this type (the check is done during the run-time) or NULL
-otherwise. Usage of this macro is preferred over obsoleted wxObject::IsKindOf()
-function.
+the pointer is of this type (the check is done during the run-time) or
+{\tt NULL} otherwise. Usage of this macro is preferred over obsoleted
+wxObject::IsKindOf() function.
-The {\it ptr} argument may be NULL, in which case NULL will be returned.
+The {\it ptr} argument may be {\tt NULL}, in which case {\tt NULL} will be
+returned.
Example:
\wxheading{See also}
\helpref{RTTI overview}{runtimeclassoverview}\\
+\helpref{wxDynamicCastThis}{wxdynamiccastthis}\\
\helpref{wxConstCast}{wxconstcast}\\
\helpref{wxStatiicCast}{wxstaticcast}
-\membersection{wxICON}\label{wxiconmacro}
-\func{}{wxICON}{iconName}
+\membersection{wxDynamicCastThis}\label{wxdynamiccastthis}
-This macro loads an icon from either application resources (on the platforms
-for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
-avoid using {\tt \#ifdef}s when creating icons.
+\func{classname *}{wxDynamicCastThis}{classname}
-\wxheading{See also}
+This macro is equivalent to {\tt wxDynamicCast(this, classname)} but the
+latter provokes spurious compilation warnings from some compilers (because it
+tests whether {\tt this} pointer is non {\tt NULL} which is always true), so
+this macro should be used to avoid them.
-\helpref{Bitmaps and icons overview}{wxbitmapoverview},
-\helpref{wxBITMAP}{wxbitmapmacro}
+\wxheading{See also}
-\wxheading{Include files}
+\helpref{wxDynamicCast}{wxdynamiccast}
-<wx/gdicmn.h>
\membersection{wxStaticCast}\label{wxstaticcast}
-\func{}{wxStaticCast}{ptr, classname}
+\func{classname *}{wxStaticCast}{ptr, classname}
This macro checks that the cast is valid in debug mode (an assert failure will
result if {\tt wxDynamicCast(ptr, classname) == NULL}) and then returns the
result of executing an equivalent of {\tt static\_cast<classname *>(ptr)}.
-\helpref{wxDynamicCast}{wxdynamiccast}\\
-\helpref{wxConstCast}{wxconstcast}
-
-\membersection{WXTRACE}\label{trace}
-
-\wxheading{Include files}
-
-<wx/object.h>
-
-\func{}{WXTRACE}{formatString, ...}
-
-Calls wxTrace with printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-
-This macro is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\membersection{WXTRACELEVEL}\label{tracelevel}
-
-\func{}{WXTRACELEVEL}{level, formatString, ...}
-
-Calls wxTraceLevel with printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-The first argument should be the level at which this information is appropriate.
-It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
-this value.
-
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\section{wxWindows resource functions}\label{resourcefuncs}
-
-\overview{wxWindows resource system}{resourceformats}
-
-This section details functions for manipulating wxWindows (.WXR) resource
-files and loading user interface elements from resources.
-
-\normalbox{Please note that this use of the word `resource' is different from that used when talking
-about initialisation file resource reading and writing, using such functions
-as wxWriteResource and wxGetResource. It is just an unfortunate clash of terminology.}
-
-\helponly{For an overview of the wxWindows resource mechanism, see \helpref{the wxWindows resource system}{resourceformats}.}
-
-See also \helpref{wxWindow::LoadFromResource}{wxwindowloadfromresource} for
-loading from resource data.
-
-\membersection{::wxResourceAddIdentifier}\label{wxresourceaddidentifier}
-
-\func{bool}{wxResourceAddIdentifier}{\param{const wxString\& }{name}, \param{int }{value}}
-
-Used for associating a name with an integer identifier (equivalent to dynamically\rtfsp
-\verb$#$defining a name to an integer). Unlikely to be used by an application except
-perhaps for implementing resource functionality for interpreted languages.
-
-\membersection{::wxResourceClear}
-
-\func{void}{wxResourceClear}{\void}
-
-Clears the wxWindows resource table.
-
-\membersection{::wxResourceCreateBitmap}
-
-\func{wxBitmap *}{wxResourceCreateBitmap}{\param{const wxString\& }{resource}}
-
-Creates a new bitmap from a file, static data, or Windows resource, given a valid
-wxWindows bitmap resource identifier. For example, if the .WXR file contains
-the following:
-
-\begin{verbatim}
-static const wxString\& project_resource = "bitmap(name = 'project_resource',\
- bitmap = ['project', wxBITMAP_TYPE_BMP_RESOURCE, 'WINDOWS'],\
- bitmap = ['project.xpm', wxBITMAP_TYPE_XPM, 'X']).";
-\end{verbatim}
-
-then this function can be called as follows:
-
-\begin{verbatim}
- wxBitmap *bitmap = wxResourceCreateBitmap("project_resource");
-\end{verbatim}
-
-\membersection{::wxResourceCreateIcon}
-
-\func{wxIcon *}{wxResourceCreateIcon}{\param{const wxString\& }{resource}}
-
-Creates a new icon from a file, static data, or Windows resource, given a valid
-wxWindows icon resource identifier. For example, if the .WXR file contains
-the following:
-
-\begin{verbatim}
-static const wxString\& project_resource = "icon(name = 'project_resource',\
- icon = ['project', wxBITMAP_TYPE_ICO_RESOURCE, 'WINDOWS'],\
- icon = ['project', wxBITMAP_TYPE_XBM_DATA, 'X']).";
-\end{verbatim}
-
-then this function can be called as follows:
-
-\begin{verbatim}
- wxIcon *icon = wxResourceCreateIcon("project_resource");
-\end{verbatim}
-
-\membersection{::wxResourceCreateMenuBar}
-
-\func{wxMenuBar *}{wxResourceCreateMenuBar}{\param{const wxString\& }{resource}}
-
-Creates a new menu bar given a valid wxWindows menubar resource
-identifier. For example, if the .WXR file contains the following:
-
-\begin{verbatim}
-static const wxString\& menuBar11 = "menu(name = 'menuBar11',\
- menu = \
- [\
- ['&File', 1, '', \
- ['&Open File', 2, 'Open a file'],\
- ['&Save File', 3, 'Save a file'],\
- [],\
- ['E&xit', 4, 'Exit program']\
- ],\
- ['&Help', 5, '', \
- ['&About', 6, 'About this program']\
- ]\
- ]).";
-\end{verbatim}
-
-then this function can be called as follows:
-
-\begin{verbatim}
- wxMenuBar *menuBar = wxResourceCreateMenuBar("menuBar11");
-\end{verbatim}
-
-
-\membersection{::wxResourceGetIdentifier}
-
-\func{int}{wxResourceGetIdentifier}{\param{const wxString\& }{name}}
+\helpref{wxDynamicCast}{wxdynamiccast}\\
+\helpref{wxConstCast}{wxconstcast}
-Used for retrieving the integer value associated with an identifier.
-A zero value indicates that the identifier was not found.
-See \helpref{wxResourceAddIdentifier}{wxresourceaddidentifier}.
-\membersection{::wxResourceParseData}\label{wxresourcedata}
+\section{Log functions}\label{logfunctions}
-\func{bool}{wxResourceParseData}{\param{const wxString\& }{resource}, \param{wxResourceTable *}{table = NULL}}
+These functions provide a variety of logging functions: see \helpref{Log classes overview}{wxlogoverview} for
+further information. The functions use (implicitly) the currently active log
+target, so their descriptions here may not apply if the log target is not the
+standard one (installed by wxWindows in the beginning of the program).
-Parses a string containing one or more wxWindows resource objects. If
-the resource objects are global static data that are included into the
-C++ program, then this function must be called for each variable
-containing the resource data, to make it known to wxWindows.
+\wxheading{Include files}
-{\it resource} should contain data in the following form:
+<wx/log.h>
-\begin{verbatim}
-dialog(name = 'dialog1',
- style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
- title = 'Test dialog box',
- x = 312, y = 234, width = 400, height = 300,
- modal = 0,
- control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
- control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
- 156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
-\end{verbatim}
-This function will typically be used after including a {\tt .wxr} file into
-a C++ program as follows:
+\membersection{::wxDebugMsg}\label{wxdebugmsg}
-\begin{verbatim}
-#include "dialog1.wxr"
-\end{verbatim}
+\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
-Each of the contained resources will declare a new C++ variable, and each
-of these variables should be passed to wxResourceParseData.
+{\bf NB:} This function is now obsolete, replaced by \helpref{Log
+functions}{logfunctions} and \helpref{wxLogDebug}{wxlogdebug} in particular.
-\membersection{::wxResourceParseFile}
+Display a debugging message; under Windows, this will appear on the
+debugger command window, and under Unix, it will be written to standard
+error.
-\func{bool}{wxResourceParseFile}{\param{const wxString\& }{filename}, \param{wxResourceTable *}{table = NULL}}
+The syntax is identical to {\bf printf}: pass a format string and a
+variable list of arguments.
-Parses a file containing one or more wxWindows resource objects
-in C++-compatible syntax. Use this function to dynamically load
-wxWindows resource data.
+{\bf Tip:} under Windows, if your application crashes before the
+message appears in the debugging window, put a wxYield call after
+each wxDebugMsg call. wxDebugMsg seems to be broken under WIN32s
+(at least for Watcom C++): preformat your messages and use OutputDebugString
+instead.
-\membersection{::wxResourceParseString}\label{wxresourceparsestring}
+\wxheading{Include files}
-\func{bool}{wxResourceParseString}{\param{char*}{ s}, \param{wxResourceTable *}{table = NULL}}
+<wx/utils.h>
-Parses a string containing one or more wxWindows resource objects. If
-the resource objects are global static data that are included into the
-C++ program, then this function must be called for each variable
-containing the resource data, to make it known to wxWindows.
-{\it resource} should contain data with the following form:
+\membersection{::wxError}\label{wxerror}
-\begin{verbatim}
-dialog(name = 'dialog1',
- style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
- title = 'Test dialog box',
- x = 312, y = 234, width = 400, height = 300,
- modal = 0,
- control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
- control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
- 156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
-\end{verbatim}
+\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Internal Error"}}
-This function will typically be used after calling \helpref{wxLoadUserResource}{wxloaduserresource} to
-load an entire {\tt .wxr file} into a string.
+{\bf NB:} This function is now obsolete, please use \helpref{wxLogError}{wxlogerror}
+instead.
-\membersection{::wxResourceRegisterBitmapData}\label{registerbitmapdata}
+Displays {\it msg} and continues. This writes to standard error under
+Unix, and pops up a message box under Windows. Used for internal
+wxWindows errors. See also \helpref{wxFatalError}{wxfatalerror}.
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char* }{xbm\_data}, \param{int }{width},
-\param{int }{height}, \param{wxResourceTable *}{table = NULL}}
+\wxheading{Include files}
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char** }{xpm\_data}}
+<wx/utils.h>
-Makes \verb$#$included XBM or XPM bitmap data known to the wxWindows resource system.
-This is required if other resources will use the bitmap data, since otherwise there
-is no connection between names used in resources, and the global bitmap data.
-\membersection{::wxResourceRegisterIconData}
+\membersection{::wxFatalError}\label{wxfatalerror}
-Another name for \helpref{wxResourceRegisterBitmapData}{registerbitmapdata}.
+\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Fatal Error"}}
-\section{Log functions}\label{logfunctions}
+{\bf NB:} This function is now obsolete, please use
+\helpref{wxLogFatalError}{wxlogfatalerror} instead.
-These functions provide a variety of logging functions: see \helpref{Log classes overview}{wxlogoverview} for
-further information. The functions use (implicitly) the currently active log
-target, so their descriptions here may not apply if the log target is not the
-standard one (installed by wxWindows in the beginning of the program).
+Displays {\it msg} and exits. This writes to standard error under Unix,
+and pops up a message box under Windows. Used for fatal internal
+wxWindows errors. See also \helpref{wxError}{wxerror}.
\wxheading{Include files}
-<wx/log.h>
+<wx/utils.h>
+
\membersection{::wxLogError}\label{wxlogerror}
-\func{void}{wxLogError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogError}{\param{const char *}{formatString}, \param{...}{}}
-The function to use for error messages, i.e. the messages that must be shown
+\func{void}{wxVLogError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+The functions to use for error messages, i.e. the messages that must be shown
to the user. The default processing is to pop up a message box to inform the
user about it.
+
\membersection{::wxLogFatalError}\label{wxlogfatalerror}
-\func{void}{wxLogFatalError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogFatalError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogFatalError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
Like \helpref{wxLogError}{wxlogerror}, but also
terminates the program with the exit code 3. Using {\it abort()} standard
function also terminates the program with this exit code.
+
\membersection{::wxLogWarning}\label{wxlogwarning}
-\func{void}{wxLogWarning}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogWarning}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogWarning}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
For warnings - they are also normally shown to the user, but don't interrupt
the program work.
+
\membersection{::wxLogMessage}\label{wxlogmessage}
-\func{void}{wxLogMessage}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogMessage}{\param{const char *}{formatString}, \param{...}{}}
-for all normal, informational messages. They also appear in a message box by
+\func{void}{wxVLogMessage}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+For all normal, informational messages. They also appear in a message box by
default (but it can be changed). Notice that the standard behaviour is to not
show informational messages if there are any errors later - the logic being
that the later error messages make the informational messages preceding them
meaningless.
+
\membersection{::wxLogVerbose}\label{wxlogverbose}
-\func{void}{wxLogVerbose}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogVerbose}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogVerbose}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
For verbose output. Normally, it is suppressed, but
might be activated if the user wishes to know more details about the program
progress (another, but possibly confusing name for the same function is {\bf wxLogInfo}).
+
\membersection{::wxLogStatus}\label{wxlogstatus}
-\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{...}{}}
-\func{void}{wxLogStatus}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxVLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
-Messages logged by this function will appear in the statusbar of the {\it
+\func{void}{wxLogStatus}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogStatus}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+Messages logged by these functions will appear in the statusbar of the {\it
frame} or of the top level application window by default (i.e. when using
-the second version of the function).
+the second version of the functions).
If the target frame doesn't have a statusbar, the message will be lost.
+
\membersection{::wxLogSysError}\label{wxlogsyserror}
-\func{void}{wxLogSysError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogSysError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogSysError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
Mostly used by wxWindows itself, but might be handy for logging errors after
system call (API function) failure. It logs the specified message text as well
\helpref{wxSysErrorCode}{wxsyserrorcode},
\helpref{wxSysErrorMsg}{wxsyserrormsg}
+
\membersection{::wxLogDebug}\label{wxlogdebug}
-\func{void}{wxLogDebug}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogDebug}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogDebug}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
-The right function for debug output. It only does anything at all in the debug
-mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expands to
+The right functions for debug output. They only do something in debug
+mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expand to
nothing in release mode (otherwise).
+
\membersection{::wxLogTrace}\label{wxlogtrace}
-\func{void}{wxLogTrace}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogTrace}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogTrace}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
\func{void}{wxLogTrace}{\param{const char *}{mask}, \param{const char *}{formatString}, \param{...}{}}
+\func{void}{wxVLogTrace}{\param{const char *}{mask}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
\func{void}{wxLogTrace}{\param{wxTraceMask}{ mask}, \param{const char *}{formatString}, \param{...}{}}
+\func{void}{wxVLogTrace}{\param{wxTraceMask}{ mask}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
As {\bf wxLogDebug}, trace functions only do something in debug build and
expand to nothing in the release one. The reason for making
it a separate function from it is that usually there are a lot of trace
messages, so it might make sense to separate them from other debug messages.
The trace messages also usually can be separated into different categories and
-the second and third versions of this function only log the message if the
+the second and third versions of this function only log the message if the
{\it mask} which it has is currently enabled in \helpref{wxLog}{wxlog}. This
allows to selectively trace only some operations and not others by changing
the value of the trace mask (possible during the run-time).
For the second function (taking a string mask), the message is logged only if
-the mask has been previously enabled by the call to
+the mask has been previously enabled by the call to
\helpref{AddTraceMask}{wxlogaddtracemask}. The predefined string trace masks
used by wxWindows are:
\item wxTraceOleCalls: trace OLE method calls (Win32 only)
\end{itemize}
+
+\membersection{::wxSafeShowMessage}\label{wxsafeshowmessage}
+
+\func{void}{wxSafeShowMessage}{\param{const wxString\& }{title}, \param{const wxString\& }{text}}
+
+This function shows a message to the user in a safe way and should be safe to
+call even before the application has been initialized or if it is currently in
+some other strange state (for example, about to crash). Under Windows this
+function shows a message box using a native dialog instead of
+\helpref{wxMessageBox}{wxmessagebox} (which might be unsafe to call), elsewhere
+it simply prints the message to the standard output using the title as prefix.
+
+\wxheading{Parameters}
+
+\docparam{title}{The title of the message box shown to the user or the prefix
+of the message string}
+
+\docparam{text}{The text to show to the user}
+
+\wxheading{See also}
+
+\helpref{wxLogFatalError}{wxlogfatalerror}
+
+\wxheading{Include files}
+
+<wx/log.h>
+
+
\membersection{::wxSysErrorCode}\label{wxsyserrorcode}
\func{unsigned long}{wxSysErrorCode}{\void}
\helpref{wxSysErrorMsg}{wxsyserrormsg},
\helpref{wxLogSysError}{wxlogsyserror}
+
\membersection{::wxSysErrorMsg}\label{wxsyserrormsg}
\func{const wxChar *}{wxSysErrorMsg}{\param{unsigned long }{errCode = 0}}
-Returns the error message corresponding to the given system error code. If
-{\it errCode} is $0$ (default), the last error code (as returned by
+Returns the error message corresponding to the given system error code. If
+{\it errCode} is $0$ (default), the last error code (as returned by
\helpref{wxSysErrorCode}{wxsyserrorcode}) is used.
\wxheading{See also}
\helpref{wxSysErrorCode}{wxsyserrorcode},
\helpref{wxLogSysError}{wxlogsyserror}
+
+\membersection{WXTRACE}\label{trace}
+
+\wxheading{Include files}
+
+<wx/object.h>
+
+\func{}{WXTRACE}{formatString, ...}
+
+{\bf NB:} This macro is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+Calls wxTrace with printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+
+\membersection{WXTRACELEVEL}\label{tracelevel}
+
+\func{}{WXTRACELEVEL}{level, formatString, ...}
+
+{\bf NB:} This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+Calls wxTraceLevel with printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+The first argument should be the level at which this information is appropriate.
+It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
+this value.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+
+\membersection{::wxTrace}\label{wxtrace}
+
+\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
+
+{\bf NB:} This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+Takes printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+
+\membersection{::wxTraceLevel}\label{wxtracelevel}
+
+\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
+
+{\bf NB:} This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+Takes printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+The first argument should be the level at which this information is appropriate.
+It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
+this value.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+
+
\section{Time functions}\label{timefunctions}
The functions in this section deal with getting the current time and
starting/stopping the global timers. Please note that the timer functions are
-deprecated because they work with one global timer only and
+deprecated because they work with one global timer only and
\helpref{wxTimer}{wxtimer} and/or \helpref{wxStopWatch}{wxstopwatch} classes
-should be used instead. For retrieving the current time, you may also use
-\helpref{wxDateTime::Now}{wxdatetimenow} or
+should be used instead. For retrieving the current time, you may also use
+\helpref{wxDateTime::Now}{wxdatetimenow} or
\helpref{wxDateTime::UNow}{wxdatetimeunow} methods.
+
\membersection{::wxGetElapsedTime}\label{wxgetelapsedtime}
-\func{long}{wxGetElapsedTime}{\param{bool}{ resetTimer = TRUE}}
+\func{long}{wxGetElapsedTime}{\param{bool}{ resetTimer = true}}
Gets the time in milliseconds since the last \helpref{::wxStartTimer}{wxstarttimer}.
-If {\it resetTimer} is TRUE (the default), the timer is reset to zero
+If {\it resetTimer} is true (the default), the timer is reset to zero
by this call.
See also \helpref{wxTimer}{wxtimer}.
<wx/timer.h>
+
\membersection{::wxGetLocalTime}\label{wxgetlocaltime}
\func{long}{wxGetLocalTime}{\void}
<wx/timer.h>
+
\membersection{::wxGetLocalTimeMillis}\label{wxgetlocaltimemillis}
-\func{wxLongLone}{wxGetLocalTimeMillis}{\void}
+\func{wxLongLong}{wxGetLocalTimeMillis}{\void}
Returns the number of milliseconds since local time 00:00:00 Jan 1st 1970.
\wxheading{See also}
\helpref{wxDateTime::Now}{wxdatetimenow},\\
-\helpref{wxLongLone}{wxlonglong}
+\helpref{wxLongLong}{wxlonglong}
\wxheading{Include files}
<wx/timer.h>
+
\membersection{::wxGetUTCTime}\label{wxgetutctime}
\func{long}{wxGetUTCTime}{\void}
<wx/timer.h>
+
+\membersection{::wxNow}\label{wxnow}
+
+\func{wxString}{wxNow}{\void}
+
+Returns a string representing the current date and time.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxSleep}\label{wxsleep}
+
+\func{void}{wxSleep}{\param{int}{ secs}}
+
+Sleeps for the specified number of seconds.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{::wxStartTimer}\label{wxstarttimer}
\func{void}{wxStartTimer}{\void}
<wx/timer.h>
+
+\membersection{::wxUsleep}\label{wxusleep}
+
+\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
+
+Sleeps for the specified number of milliseconds. Notice that usage of this
+function is encouraged instead of calling usleep(3) directly because the
+standard usleep() function is not MT safe.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+
\section{Debugging macros and functions}\label{debugmacros}
-Useful macros and functions for error checking and defensive programming. ASSERTs are only
-compiled if \_\_WXDEBUG\_\_ is defined, whereas CHECK macros stay in release
-builds.
+Useful macros and functions for error checking and defensive programming.
+wxWindows defines three families of the assert-like macros:
+the wxASSERT and wxFAIL macros only do anything if \_\_WXDEBUG\_\_ is defined
+(in other words, in the debug build) but disappear completely in the release
+build. On the other hand, the wxCHECK macros stay event in release builds but a
+check failure doesn't generate any user-visible effects then. Finally, the
+compile time assertions don't happen during the run-time but result in the
+compilation error messages if the condition they check fail.
\wxheading{Include files}
<wx/debug.h>
+
\membersection{::wxOnAssert}\label{wxonassert}
-\func{void}{wxOnAssert}{\param{const char*}{ fileName}, \param{int}{ lineNumber}, \param{const char*}{ msg = NULL}}
+\func{void}{wxOnAssert}{\param{const char *}{fileName}, \param{int}{ lineNumber}, \param{const char *}{cond}, \param{const char *}{msg = NULL}}
+
+This function is called whenever one of debugging macros fails (i.e. condition
+is false in an assertion). It is only defined in the debug mode, in release
+builds the \helpref{wxCHECK}{wxcheck} failures don't result in anything.
+
+To override the default behaviour in the debug builds which is to show the user
+a dialog asking whether he wants to abort the program, continue or continue
+ignoring any subsequent assert failures, you may override
+\helpref{wxApp::OnAssert}{wxapponassert} which is called by this function if
+the global application object exists.
-This function may be redefined to do something non trivial and is called
-whenever one of debugging macros fails (i.e. condition is false in an
-assertion).
-% TODO: this should probably be an overridable in wxApp.
\membersection{wxASSERT}\label{wxassert}
\func{}{wxASSERT}{\param{}{condition}}
-Assert macro. An error message will be generated if the condition is FALSE in
+Assert macro. An error message will be generated if the condition is false in
debug mode, but nothing will be done in the release build.
Please note that the condition in wxASSERT() should have no side effects
because it will not be executed in release mode at all.
-See also: \helpref{wxASSERT\_MSG}{wxassertmsg}
+\wxheading{See also}
+
+\helpref{wxASSERT\_MSG}{wxassertmsg},\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
+
+\membersection{wxASSERT\_MIN\_BITSIZE}\label{wxassertminbitsize}
+
+\func{}{wxASSERT\_MIN\_BITSIZE}{\param{}{type}, \param{}{size}}
+
+This macro results in a
+\helpref{compile time assertion failure}{wxcompiletimeassert} if the size
+of the given type {\it type} is less than {\it size} bits.
+
+You may use it like this, for example:
+
+\begin{verbatim}
+ // we rely on the int being able to hold values up to 2^32
+ wxASSERT_MIN_BITSIZE(int, 32);
+
+ // can't work with the platforms using UTF-8 for wchar_t
+ wxASSERT_MIN_BITSIZE(wchar_t, 16);
+\end{verbatim}
+
\membersection{wxASSERT\_MSG}\label{wxassertmsg}
\func{}{wxASSERT\_MSG}{\param{}{condition}, \param{}{msg}}
-Assert macro with message. An error message will be generated if the condition is FALSE.
+Assert macro with message. An error message will be generated if the condition is false.
+
+\wxheading{See also}
+
+\helpref{wxASSERT}{wxassert},\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
+
+\membersection{wxCOMPILE\_TIME\_ASSERT}\label{wxcompiletimeassert}
+
+\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}}
+
+Using {\tt wxCOMPILE\_TIME\_ASSERT} results in a compilation error if the
+specified {\it condition} is false. The compiler error message should include
+the {\it msg} identifier - please note that it must be a valid C++ identifier
+and not a string unlike in the other cases.
+
+This macro is mostly useful for testing the expressions involving the
+{\tt sizeof} operator as they can't be tested by the preprocessor but it is
+sometimes desirable to test them at the compile time.
+
+Note that this macro internally declares a struct whose name it tries to make
+unique by using the {\tt \_\_LINE\_\_} in it but it may still not work if you
+use it on the same line in two different source files. In this case you may
+either change the line in which either of them appears on or use the
+\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2} macro.
+
+Also note that Microsoft Visual C++ has a bug which results in compiler errors
+if you use this macro with ``Program Database For Edit And Continue''
+(\texttt{/ZI}) option, so you shouldn't use it (``Program Database''
+(\texttt{/Zi}) is ok though) for the code making use of this macro.
+
+\wxheading{See also}
+
+\helpref{wxASSERT\_MSG}{wxassertmsg},\\
+\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}
+
+
+\membersection{wxCOMPILE\_TIME\_ASSERT2}\label{wxcompiletimeassert2}
+
+\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}, \param{}{name}}
+
+This macro is identical to \helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2}
+except that it allows you to specify a unique {\it name} for the struct
+internally defined by this macro to avoid getting the compilation errors
+described \helpref{above}{wxcompiletimeassert}.
-See also: \helpref{wxASSERT}{wxassert}
\membersection{wxFAIL}\label{wxfail}
See also: \helpref{wxFAIL\_MSG}{wxfailmsg}
+
\membersection{wxFAIL\_MSG}\label{wxfailmsg}
\func{}{wxFAIL\_MSG}{\param{}{msg}}
it may be used in the "default:" branch of a switch statement if all possible
cases are processed above.
-See also: \helpref{wxFAIL}{wxfail}
+\wxheading{See also}
+
+\helpref{wxFAIL}{wxfail}
+
\membersection{wxCHECK}\label{wxcheck}
Checks that the condition is true, returns with the given return value if not (FAILs in debug mode).
This check is done even in release mode.
+
\membersection{wxCHECK\_MSG}\label{wxcheckmsg}
\func{}{wxCHECK\_MSG}{\param{}{condition}, \param{}{retValue}, \param{}{msg}}
Checks that the condition is true, returns with the given return value if not (FAILs in debug mode).
This check is done even in release mode.
-This macro may be only used in non void functions, see also
+This macro may be only used in non void functions, see also
\helpref{wxCHECK\_RET}{wxcheckret}.
+
\membersection{wxCHECK\_RET}\label{wxcheckret}
\func{}{wxCHECK\_RET}{\param{}{condition}, \param{}{msg}}
Checks that the condition is true, and returns if not (FAILs with given error
message in debug mode). This check is done even in release mode.
-This macro should be used in void functions instead of
+This macro should be used in void functions instead of
\helpref{wxCHECK\_MSG}{wxcheckmsg}.
+
\membersection{wxCHECK2}\label{wxcheck2}
\func{}{wxCHECK2}{\param{}{condition}, \param{}{operation}}
-Checks that the condition is true and \helpref{wxFAIL}{wxfail} and execute
-{\it operation} if it is not. This is a generalisation of
+Checks that the condition is true and \helpref{wxFAIL}{wxfail} and execute
+{\it operation} if it is not. This is a generalisation of
\helpref{wxCHECK}{wxcheck} and may be used when something else than just
returning from the function must be done when the {\it condition} is false.
This check is done even in release mode.
+
\membersection{wxCHECK2\_MSG}\label{wxcheck2msg}
\func{}{wxCHECK2}{\param{}{condition}, \param{}{operation}, \param{}{msg}}
-This is the same as \helpref{wxCHECK2}{wxcheck2}, but
+This is the same as \helpref{wxCHECK2}{wxcheck2}, but
\helpref{wxFAIL\_MSG}{wxfailmsg} with the specified {\it msg} is called
instead of wxFAIL() if the {\it condition} is false.
+
+\membersection{::wxTrap}\label{wxtrap}
+
+\func{void}{wxTrap}{\void}
+
+In debug mode (when {\tt \_\_WXDEBUG\_\_} is defined) this function generates a
+debugger exception meaning that the control is passed to the debugger if one is
+attached to the process. Otherwise the program just terminates abnormally.
+
+In release mode this function does nothing.
+
+\wxheading{Include files}
+
+<wx/debug.h>
+
+
+
+\membersection{::wxIsDebuggerRunning}\label{wxisdebuggerrunning}
+
+\func{bool}{wxIsDebuggerRunning}{\void}
+
+Returns {\tt true} if the program is running under debugger, {\tt false}
+otherwise.
+
+Please note that this function is currently only implemented for Mac builds
+using CodeWarrior and always returns {\tt false} elsewhere.
+
+
+
+
\section{Environment access functions}\label{environfunctions}
The functions in this section allow to access (get) or change value of
<wx/utils.h>
+
\membersection{wxGetenv}\label{wxgetenvmacro}
\func{wxChar *}{wxGetEnv}{\param{const wxString\&}{ var}}
with \helpref{wxSetEnv}{wxsetenv}, use \helpref{wxGetEnv}{wxgetenv} function
instead.
+
\membersection{wxGetEnv}\label{wxgetenv}
\func{bool}{wxGetEnv}{\param{const wxString\&}{ var}, \param{wxString *}{value}}
{\it value} may be {\tt NULL} if you just want to know if the variable exists
and are not interested in its value.
-Returns {\tt TRUE} if the variable exists, {\tt FALSE} otherwise.
+Returns {\tt true} if the variable exists, {\tt false} otherwise.
+
\membersection{wxSetEnv}\label{wxsetenv}
Sets the value of the environment variable {\it var} (adding it if necessary)
to {\it value}.
-Returns {\tt TRUE} on success.
+Returns {\tt true} on success.
+
\membersection{wxUnsetEnv}\label{wxunsetenv}
\func{bool}{wxUnsetEnv}{\param{const wxString\&}{ var}}
-Removes the variable {\it var} from the environment.
-\helpref{wxGetEnv}[wxgetenv} will return {\tt NULL} after the call to this
+Removes the variable {\it var} from the environment.
+\helpref{wxGetEnv}{wxgetenv} will return {\tt NULL} after the call to this
function.
-Returns {\tt TRUE} on success.
-
+Returns {\tt true} on success.
projects / wxWidgets.git / blobdiff