wxDataViewCtrl DnD stubs, some reformating

[wxWidgets.git] / docs / latex / wx / semaphor.tex

diff --git a/docs/latex/wx/semaphor.tex b/docs/latex/wx/semaphor.tex
index 335a399597540a2df3f43d1b0ac32b2ccf9d7ce9..9d9271f944dfd1da26d27bba866362fa8b0c2636 100644 (file)
--- a/docs/latex/wx/semaphor.tex
+++ b/docs/latex/wx/semaphor.tex
@@ -20,8 +20,8 @@ decrements the counter. As soon as it reaches $0$, any subsequent calls to
 counter becomes strictly positive again as the result of calling 
 \helpref{Post}{wxsemaphorepost} which increments the counter.
 
-In general, the semaphores are useful to restrict access to a shared resource
-which can only be accessed by some fixed number of clients at once. For
+In general, semaphores are useful to restrict access to a shared resource
+which can only be accessed by some fixed number of clients at the same time. For
 example, when modeling a hotel reservation system a semaphore with the counter
 equal to the total number of available rooms could be created. Each time a room
 is reserved, the semaphore should be acquired by calling 
@@ -36,6 +36,10 @@ No base class
 
 <wx/thread.h>
 
+\wxheading{Library}
+
+\helpref{wxBase}{librarieslist}
+
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 \membersection{wxSemaphore::wxSemaphore}\label{wxsemaphorewxsemaphore}
@@ -43,8 +47,9 @@ No base class
 \func{}{wxSemaphore}{\param{int }{initialcount = 0}, \param{int }{maxcount = 0}}
 
 Specifying a {\it maxcount} of $0$ actually makes wxSemaphore behave as if
-there is no upper limit. If maxcount is $1$ the semaphore behaves exactly as a
-mutex.
+there is no upper limit. If maxcount is $1$, the semaphore behaves almost as a
+mutex (but unlike a mutex it can be released by a thread different from the one
+which acquired it).
 
 {\it initialcount} is the initial value of the semaphore which must be between
 $0$ and {\it maxcount} (if it is not set to $0$).
@@ -57,28 +62,78 @@ Destructor is not virtual, don't use this class polymorphically.
 
 \membersection{wxSemaphore::Post}\label{wxsemaphorepost}
 
-\func{void}{Post}{\void}
+\func{wxSemaError }{Post}{\void}
+
+Increments the semaphore count and signals one of the waiting
+threads in an atomic way. Returns wxSEMA\_OVERFLOW if the count
+would increase the counter past the maximum.
+
+\wxheading{Return value}
+
+One of:
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSEMA\_NO\_ERROR}}{There was no error.}
+\twocolitem{{\bf wxSEMA\_INVALID}}{Semaphore hasn't been initialized successfully.}
+\twocolitem{{\bf wxSEMA\_OVERFLOW}}{Post() would increase counter past the max.}
+\twocolitem{{\bf wxSEMA\_MISC\_ERROR}}{Miscellaneous error.}
+\end{twocollist}
 
-Increments the semaphore count and signals one of the waiting threads in an
-atomic way.
 
 \membersection{wxSemaphore::TryWait}\label{wxsemaphoretrywait}
 
-\func{bool}{TryWait}{\void}
+\func{wxSemaError }{TryWait}{\void}
+
+Same as \helpref{Wait()}{wxsemaphorewait}, but returns immediately.
+
+\wxheading{Return value}
+
+One of:
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSEMA\_NO\_ERROR}}{There was no error.}
+\twocolitem{{\bf wxSEMA\_INVALID}}{Semaphore hasn't been initialized successfully.}
+\twocolitem{{\bf wxSEMA\_BUSY}}{Returned by TryWait() if Wait() would block, i.e. the count is zero.}
+\twocolitem{{\bf wxSEMA\_MISC\_ERROR}}{Miscellaneous error.}
+\end{twocollist}
 
-Same as \helpref{Wait()}{wxsemaphorewait}, but does not block, returns
-{\tt TRUE} if the semaphore was successfully acquired and {\tt FALSE} if the
-count is zero and it couldn't be done.
 
 \membersection{wxSemaphore::Wait}\label{wxsemaphorewait}
 
-\func{void}{Wait}{\void}
+\func{wxSemaError }{Wait}{\void}
 
 Wait indefinitely until the semaphore count becomes strictly positive
 and then decrement it and return.
 
-\func{bool}{Wait}{\param{unsigned long }{timeout\_millis}}
+\wxheading{Return value}
+
+One of:
+
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSEMA\_NO\_ERROR}}{There was no error.}
+\twocolitem{{\bf wxSEMA\_INVALID}}{Semaphore hasn't been initialized successfully.}
+\twocolitem{{\bf wxSEMA\_MISC\_ERROR}}{Miscellaneous error.}
+\end{twocollist}
+
+\membersection{wxSemaphore::WaitTimeout}\label{wxsemaphorewaittimeout}
+
+\func{wxSemaError }{WaitTimeout}{\param{unsigned
+long}{timeout\_millis}}
+
+Same as \helpref{Wait()}{wxsemaphorewait}, but with a timeout
+limit.
+
+\wxheading{Return value}
 
-Same as the version above, but with a timeout limit: returns {\tt TRUE} if the
-semaphore was acquired and {\tt FALSE} if the timeout has elapsed
+One of:
 
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxSEMA\_NO\_ERROR}}{There was no error.}
+\twocolitem{{\bf wxSEMA\_INVALID}}{Semaphore hasn't been initialized successfully.}
+\twocolitem{{\bf wxSEMA\_TIMEOUT}}{Timeout occurred without receiving semaphore.}
+\twocolitem{{\bf wxSEMA\_MISC\_ERROR}}{Miscellaneous error.}
+\end{twocollist}