/////////////////////////////////////////////////////////////////////////////
-// Name: wx/msw/wince/setup.h
+// Name: wx/msw/setup.h
// Purpose: Configuration for the library
-// Author: Marco Cavallini
+// Author: Julian Smart
// Modified by:
-// Created: 08/11/2002
-// RCS-ID:
-// Copyright: (c) KOAN SAS ( www.koansoftware.com )
-// Licence: wxWindows license
-///////////////////////////////////////////////////////////////////////////////
+// Created: 01/02/97
+// RCS-ID: $Id$
+// Copyright: (c) Julian Smart
+// Licence: wxWindows licence
+/////////////////////////////////////////////////////////////////////////////
#ifndef _WX_SETUP_H_
#define _WX_SETUP_H_
// compatibility settings
// ----------------------------------------------------------------------------
-// This setting determines the compatibility with 1.68 API:
-// Level 0: no backward compatibility, all new features
-// Level 1: some extra methods are defined for compatibility.
-//
-// Default is 0.
-//
-// Recommended setting: 0 (in fact the compatibility code is now very minimal
-// so there is little advantage to setting it to 1.
-#define WXWIN_COMPATIBILITY 0
-
-// This setting determines the compatibility with 2.0 API: set it to 1 to
-// enable it
+// This setting determines the compatibility with 2.2 API: set it to 1 to
+// enable it but please consider updating your code instead.
//
-// Default is 0.
-//
-// Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2 0
-
-// This setting determines the compatibility with 2.0 API: set it to 1 to
-// enable it
-//
-// Default is 1.
+// Default is 0
//
-// Recommended setting: 0 (please update your code instead!)
-#define WXWIN_COMPATIBILITY_2_2 1
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_2 0
-// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap,
-// but this is very dangerous because you can mistakenly pass an icon instead
-// of a bitmap to a function taking "const wxBitmap&" - which will *not* work
-// because an icon is not a valid bitmap
+// This setting determines the compatibility with 2.4 API: set it to 0 to
+// flag all cases of using deprecated functions.
//
-// Starting from 2.1.12, you have the choice under this backwards compatible
-// behaviour (your code will still compile, but probably won't behave as
-// expected!) and not deriving wxIcon class from wxBitmap, but providing a
-// conversion ctor wxBitmap(const wxIcon&) instead.
+// Default is 1 but please try building your code with 0 as the default will
+// change to 0 in the next version and the deprecated functions will disappear
+// in the version after it completely.
//
-// Recommended setting: 0
-#define wxICON_IS_BITMAP 0
+// Recommended setting: 0 (please update your code)
+#define WXWIN_COMPATIBILITY_2_4 1
// Define as 1 for font size to be backward compatible to 1.63 and earlier.
// 1.64 and later define point sizes to be compatible with Windows.
// Generic comment about debugging settings: they are very useful if you don't
// use any other memory leak detection tools such as Purify/BoundsChecker, but
// are probably redundant otherwise. Also, Visual C++ CRT has the same features
-// as wxWindows memory debugging subsystem built in since version 5.0 and you
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
// may prefer to use it instead of built in memory debugging code because it is
// faster and more fool proof.
//
// Default is 1
//
// Recommended setting: 1 if your compiler supports it.
-#ifdef _MSC_VER
+#if defined(_MSC_VER) && !defined(__WXWINCE__)
#define wxUSE_ON_FATAL_EXCEPTION 1
#else
#define wxUSE_ON_FATAL_EXCEPTION 0
// Unicode support
// ----------------------------------------------------------------------------
-// Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
// defined as wchar_t, wxString will use Unicode internally. If you set this
// to 1, you must use wxT() macro for all literal strings in the program.
//
-// Unicode is currently only fully supported under Windows NT/2000/XP (Windows 9x
-// doesn't support it and the programs compiled in Unicode mode will not run
-// under 9x).
+// Unicode is currently only fully supported under Windows NT/2000/XP
+// (Windows 9x doesn't support it and the programs compiled in Unicode mode
+// will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
//
// Default is 0
//
-// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
-#define wxUSE_UNICODE 0
+// Recommended setting: 1
+#ifndef wxUSE_UNICODE
+ #define wxUSE_UNICODE 1
+#endif
-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode
-// and be able to run compiled apps under Windows 9x as well as NT/2000/XP. This
-// setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
-// http://www.microsoft.com/globaldev/Articles/mslu_announce.asp). Note that you
-// will have to modify the makefiles to include unicows.lib import library as the first
-// library (if you use MSVC, you can run the makefile with "nmake MSLU=1 UNICODE=1"
-// command).
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
+// and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
+// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
+// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note that
+// you will have to modify the makefiles to include unicows.lib import library
+// as the first library (if you use MSVC, you can run the makefile with "nmake
+// MSLU=1 UNICODE=1" command).
//
// If your compiler doesn't have unicows.lib, you can get a version of it at
// http://libunicows.sourceforge.net
//
// Default is 0
//
-// Recommended setting: 0
+// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
#define wxUSE_UNICODE_MSLU 0
// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
// global features
// ----------------------------------------------------------------------------
+// Compile library in exception-safe mode? If set to 1, the library will try to
+// behave correctly in presence of exceptions (even though it still will not
+// use the exceptions itself) and notify the user code about any unhandled
+// exceptions. If set to 0, propagation of the exceptions through the library
+// code will lead to undefined behaviour -- but the code itself will be
+// slightly smaller and faster.
+//
+// Default is 1
+//
+// Recommended setting: depends on whether you intend to use C++ exceptions
+// in your own code (1 if you do, 0 if you don't)
+#define wxUSE_EXCEPTIONS 0
+
+// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_EXTENDED_RTTI 0
+
+// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
+// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
+// and for wxHashMap to be implemented with templates.
+//
+// Default is 0
+//
+// Recommended setting: YMMV
+#define wxUSE_STL 0
+
// Support for message/error logging. This includes wxLogXXX() functions and
// wxLog and derived classes. Don't set this to 0 unless you really know what
// you are doing.
// Recommended setting: 1 (always)
#define wxUSE_LOG 1
-// Support for command line parsing using wxCmdLineParser class.
-//
-// Default is 1
-//
-// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
-#define wxUSE_CMDLINE_PARSER 1
-
// Recommended setting: 1
#define wxUSE_LOGWINDOW 1
// Recommended setting: 1
#define wxUSE_LOG_DIALOG 1
+// Support for command line parsing using wxCmdLineParser class.
+//
+// Default is 1
+//
+// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
+#define wxUSE_CMDLINE_PARSER 1
+
// Support for multithreaded applications: if 1, compile in thread classes
// (thread.h) and make the library a bit more thread safe. Although thread
// support is quite stable by now, you may still consider recompiling the
// Recommended setting: 0 unless you do plan to develop MT applications
#define wxUSE_THREADS 1
-// If enabled (1), compiles wxWindows streams classes
+// If enabled (1), compiles wxWidgets streams classes
#define wxUSE_STREAMS 1
// Use standard C++ streams if 1. If 0, use wxWin streams implementation.
// Default is 1
//
// Recommended setting: 1 (but may be safely disabled if you don't use it)
-#define wxUSE_FSVOLUME 1
+#define wxUSE_FSVOLUME 0
// use wxTextBuffer class: required by wxTextFile
#define wxUSE_TEXTBUFFER 1
// Recommended setting: 1
#define wxUSE_DATETIME 1
-// wxUSE_TIMEDATE enables compilation of the old wxDate and wxTime classes (not
-// the same as wxDateTime!). These classes are obsolete and shouldn't be used
-// in new code
-//
-// Default is 0
-//
-// Recommended setting: 0 unless you have legacy code which uses these classes
-#define wxUSE_TIMEDATE 0
-
// Set wxUSE_TIMER to 1 to compile wxTimer class
//
// Default is 1
// Recommended setting: 1
#define wxUSE_CONFIG_NATIVE 1
+// Use wxFileConfig.
+// Recommended setting: 1
+#define wxUSE_FILECONFIG 0
+
// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
// to connect/disconnect from the network and be notified whenever the dial-up
// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
// Default is 1.
//
// Recommended setting: 1
-#define wxUSE_DIALUP_MANAGER 1
+#define wxUSE_DIALUP_MANAGER 0
// Compile in classes for run-time DLL loading and function calling.
// Required by wxUSE_DIALUP_MANAGER.
#define wxUSE_DYNLIB_CLASS 1
// experimental, don't use for now
-#define wxUSE_DYNAMIC_LOADER 1
+#define wxUSE_DYNAMIC_LOADER 0
// Set to 1 to use socket classes
-#define wxUSE_SOCKETS 1
+#define wxUSE_SOCKETS 0
// Set to 1 to enable virtual file systems (required by wxHTML)
#define wxUSE_FILESYSTEM 1
// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
-#define wxUSE_FS_ZIP 1
+#define wxUSE_FS_ZIP 0
// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
-#define wxUSE_FS_INET 1
+#define wxUSE_FS_INET 0
// Set to 1 to compile wxZipInput/OutputStream classes.
-#define wxUSE_ZIPSTREAM 1
+#define wxUSE_ZIPSTREAM 0
// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
// wxUSE_LIBPNG.
// If enabled, the code written by Apple will be used to write, in a portable
// way, float on the disk. See extended.c for the license which is different
-// from wxWindows one.
+// from wxWidgets one.
//
// Default is 1.
//
// Default is 1.
//
// Recommended setting: 1
-#define wxUSE_PROTOCOL 1
+#define wxUSE_PROTOCOL 0
// The settings for the individual URL schemes
#define wxUSE_PROTOCOL_FILE 1
#define wxUSE_PROTOCOL_HTTP 1
// Define this to use wxURL class.
-#define wxUSE_URL 1
+#define wxUSE_URL 0
// Support for regular expression matching via wxRegEx class: enable this to
// use POSIX regular expressions in your code. You need to compile regex
//
// Recommended setting: 1 if your compiler supports it, if it doesn't please
// contribute us a makefile for src/regex for it
-#define wxUSE_REGEX 1
+#define wxUSE_REGEX 0
// wxSystemOptions class
#define wxUSE_SYSTEM_OPTIONS 1
-// wxWave class
-#define wxUSE_WAVE 1
+// wxSound class
+#define wxUSE_SOUND 1
+
+// XML parsing classes. Note that their API will change in the future, so
+// using wxXmlDocument and wxXmlNode in your app is not recommended.
+//
+// Default is 1
+//
+// Recommended setting: 1 (needed by XRC)
+#define wxUSE_XML 1
// ----------------------------------------------------------------------------
// Individual GUI controls
// Recommended setting: 1 (may be set to 0)
#define wxUSE_TIPWINDOW 1
-// Each of the settings below corresponds to one wxWindows control. They are
+// Each of the settings below corresponds to one wxWidgets control. They are
// all switched on by default but may be disabled if you are sure that your
// program (including any standard dialogs it can show!) doesn't need them and
// if you desperately want to save some space. If you use any of these you must
#define wxUSE_BMPBUTTON 1 // wxBitmapButton
#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
#define wxUSE_CHECKBOX 1 // wxCheckBox
-#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
+#define wxUSE_CHECKLISTBOX 0 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
#define wxUSE_CHOICE 1 // wxChoice
#define wxUSE_COMBOBOX 1 // wxComboBox
#define wxUSE_GAUGE 1 // wxGauge
// Default is 1
//
// Recommended setting: 1
+#ifdef __SMARTPHONE__
+#define wxUSE_STATUSBAR 0
+#else
#define wxUSE_STATUSBAR 1
+#endif
// Two status bar implementations are available under Win32: the generic one
// or the wrapper around native control. For native look and feel the native
// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
// classes at all. Otherwise, use the native toolbar class unless
-// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
-// supports some features which might not be supported by the native wxToolBar
-// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
+// wxUSE_TOOLBAR_NATIVE is 0.
//
// Default is 1 for all settings.
//
-// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
-// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
#define wxUSE_TOOLBAR 1
#define wxUSE_TOOLBAR_NATIVE 1
-#define wxUSE_TOOLBAR_SIMPLE 1
-
-// this setting is obsolete, value is ignored
-#define wxUSE_BUTTONBAR 1
// wxNotebook is a control with several "tabs" located on one of its sides. It
// may be used ot logically organise the data presented to the user instead of
// Recommended setting: 1
#define wxUSE_NOTEBOOK 1
+// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
+// the tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_LISTBOOK 1
+
// wxTabDialog is a generic version of wxNotebook but it is incompatible with
// the new class. It shouldn't be used in new code.
//
// Recommended setting: 0 (use wxNotebook)
#define wxUSE_TAB_DIALOG 0
-// wxGrid class comes in two flavours: the original (pre wxWin 2.2) one and
-// the new, much imporved and enhanced version. The new version is backwards
-// compatible with the old one and should be used whenever possible, i.e. if
-// you set wxUSE_GRID to 1, set wxUSE_NEW_GRID to 1 too.
+// wxGrid class
//
// Default is 1 for both options.
//
-// Recommended setting: 1 for wxUSE_NEW_GRID, 0 if you have an old code using
-// wxGrid and 100% backwards compatibality (with all old wxGrid quirks) is
-// essential.
+// Recommended setting: 1
//
-// WIN16/BC++ resets wxUSE_NEW_GRID to 0 because it exceeds the data limit.
#define wxUSE_GRID 1
-#define wxUSE_NEW_GRID 1
-
-// wxProperty[Value/Form/List] classes, used by Dialog Editor
-#define wxUSE_PROPSHEET 1
// ----------------------------------------------------------------------------
// Miscellaneous GUI stuff
// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
#define wxUSE_ACCEL 1
+// Hotkey support (currently Windows only)
+#define wxUSE_HOTKEY 1
+
// Use wxCaret: a class implementing a "cursor" in a text control (called caret
// under Windows).
//
// Recommended setting: 1 (can be safely set to 0, not used by the library)
#define wxUSE_CARET 1
+// Use wxDisplay class: it allows enumerating all displays on a system and
+// working with them.
+//
+// Default is 0 because it isn't yet implemented on all platforms
+//
+// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
+#define wxUSE_DISPLAY 0
+
// Miscellaneous geometry code: needed for Canvas library
#define wxUSE_GEOMETRY 1
// Default is 1.
//
// Recommended setting: 1
-#define wxUSE_TOOLTIPS 1
+#define wxUSE_TOOLTIPS 0
// wxValidator class and related methods
#define wxUSE_VALIDATORS 1
// wxDC cacheing implementation
#define wxUSE_DC_CACHEING 1
+// Set this to 1 to enable the use of DIB's for wxBitmap to support
+// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
+#define wxUSE_DIB_FOR_BITMAP 0
+
+// Set this to 1 to enable wxDIB
+#define wxUSE_WXDIB 1
+
// ----------------------------------------------------------------------------
// common dialogs
// ----------------------------------------------------------------------------
// Default is 1
//
// Recommended setting: 1 (unless it really doesn't work)
-#define wxUSE_COMMON_DIALOGS 1
+#define wxUSE_COMMON_DIALOGS 0
// wxBusyInfo displays window with message when app is busy. Works in same way
// as wxBusyCursor
// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
//
// Recommended setting: default or 0 for everything for portable programs.
-#define wxUSE_METAFILE 1
-#define wxUSE_ENH_METAFILE 1
+#define wxUSE_METAFILE 0
+#define wxUSE_ENH_METAFILE 0
#define wxUSE_WIN_METAFILES_ALWAYS 0
// ----------------------------------------------------------------------------
// Set to 0 to disable document/view architecture
#define wxUSE_DOC_VIEW_ARCHITECTURE 1
+// Set to 0 to disable MDI support.
+//
+// Requires wxUSE_NOTEBOOK under platforms other than MSW.
+//
+// Default is 1.
+//
+// Recommended setting: 1, can be safely set to 0.
+#define wxUSE_MDI 0
+
// Set to 0 to disable MDI document/view architecture
-#define wxUSE_MDI_ARCHITECTURE 1
+#define wxUSE_MDI_ARCHITECTURE 0
// Set to 0 to disable print/preview architecture code
-#define wxUSE_PRINTING_ARCHITECTURE 1
+#define wxUSE_PRINTING_ARCHITECTURE 0
// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
// much more.
//
// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
// smaller library.
-#define wxUSE_HTML 1
+#define wxUSE_HTML 0
-// OpenGL canvas
+// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
+// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
+// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
+// will need to manually add opengl32.lib and glu32.lib to the list of
+// libraries linked with your program if you use OpenGL.
+//
+// Default is 0.
+//
+// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
#define wxUSE_GLCANVAS 0
-// wxTreeLayout class
-#define wxUSE_TREELAYOUT 1
-
// ----------------------------------------------------------------------------
// Data transfer
// ----------------------------------------------------------------------------
// different from "built in" drag and drop in wxTreeCtrl which is always
// available). Requires wxUSE_DATAOBJ.
//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_DRAG_AND_DROP 1
+
+// Use wxAccessible for enhanced and customisable accessibility.
+// Depends on wxUSE_OLE.
+//
// Default is 0.
//
-// Recommended WinCE setting: 0
-#define wxUSE_DRAG_AND_DROP 0
+// Recommended setting (at present): 0
+#define wxUSE_ACCESSIBILITY 0
// ----------------------------------------------------------------------------
// miscellaneous settings
#define wxUSE_DRAGIMAGE 1
-#define wxUSE_IPC 1
+#define wxUSE_IPC 0
// 0 for no interprocess comms
#define wxUSE_HELP 1
// 0 for no help facility
-#define wxUSE_MS_HTML_HELP 1
+#define wxUSE_MS_HTML_HELP 0
// 0 for no MS HTML Help
// Use wxHTML-based help controller?
-#define wxUSE_WXHTML_HELP 1
+#define wxUSE_WXHTML_HELP 0
-#define wxUSE_RESOURCES 1
+#define wxUSE_RESOURCES 0
// 0 for no wxGetResource/wxWriteResource
#define wxUSE_CONSTRAINTS 1
// 0 for no window layout constraint system
#define wxUSE_SPLINES 1
// 0 for no splines
-#define wxUSE_XPM_IN_MSW 1
- // 0 for no XPM support in wxBitmap.
- // Default is 1, as XPM is now fully
- // supported this makes easier the issue
- // of portable icons and bitmaps.
-
-#define wxUSE_IMAGE_LOADING_IN_MSW 1
- // Use dynamic DIB loading/saving code in utils/dib under MSW.
-#define wxUSE_RESOURCE_LOADING_IN_MSW 1
- // Use dynamic icon/cursor loading/saving code
- // under MSW.
-#define wxUSE_WX_RESOURCES 1
- // Use .wxr resource mechanism (requires PrologIO library)
-
#define wxUSE_MOUSEWHEEL 1
// Include mouse wheel support
// Set to 0 to disable PostScript print/preview architecture code under Windows
// (just use Windows printing).
-#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
+#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
// ----------------------------------------------------------------------------
// database classes
// ----------------------------------------------------------------------------
// Define 1 to use ODBC classes
-#define wxUSE_ODBC 1
+#define wxUSE_ODBC 0
// For backward compatibility reasons, this parameter now only controls the
// default scrolling method used by cursors. This default behavior can be
#define REMOVE_UNUSED_ARG 1
// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
-// them. Set to 1 for <iostream.h>, 0 for <iostream>
+// them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
+// and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
+// used anyhow.
//
// Default is 1.
//
#define wxUSE_LIBJPEG 1
// Set to 1 for TIFF format support (requires libtiff)
-#define wxUSE_LIBTIFF 1
+#define wxUSE_LIBTIFF 0
// Set to 1 for GIF format support
#define wxUSE_GIF 1
// Set to 1 for PNM format support
-#define wxUSE_PNM 1
+#define wxUSE_PNM 0
// Set to 1 for PCX format support
-#define wxUSE_PCX 1
+#define wxUSE_PCX 0
// Set to 1 for IFF format support (Amiga format)
#define wxUSE_IFF 0
#define wxUSE_XPM 1
// Set to 1 for MS Icons and Cursors format support
-#define wxUSE_ICO_CUR 1
+#define wxUSE_ICO_CUR 0
// Set to 1 to compile in wxPalette class
#define wxUSE_PALETTE 1
// Windows-only settings
// ----------------------------------------------------------------------------
-// Set this to 1 if you want to use wxWindows and MFC in the same program. This
+// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
// will override some other settings (see below)
//
// Default is 0.
//
// Recommended setting: 1, only set it to 0 if your compiler doesn't have
// or can't compile <richedit.h>
-#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__)
-#define wxUSE_RICHEDIT 1
+#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
+#define wxUSE_RICHEDIT 0
// TODO: This should be ifdef'ed for any compilers that don't support
// RichEdit 2.0 but do have RichEdit 1.0...
-#define wxUSE_RICHEDIT2 1
+#define wxUSE_RICHEDIT2 0
#else
#define wxUSE_RICHEDIT 0
// Default is 1.
//
// Recommended setting: 1, set to 0 for a small library size reduction
-#define wxUSE_OWNER_DRAWN 1
+#define wxUSE_OWNER_DRAWN 0
+
+// Set to 1 to compile MS Windows XP theme engine support
+#define wxUSE_UXTHEME 0
+
+// Set to 1 to auto-adapt to MS Windows XP themes where possible
+// (notably, wxNotebook pages)
+#define wxUSE_UXTHEME_AUTO 0
// ----------------------------------------------------------------------------
// obsolete settings
// NOW MANDATORY: don't change.
#define wxUSE_DYNAMIC_CLASSES 1
-// ----------------------------------------------------------------------------
-// disable the settings which don't work for some compilers
-// ----------------------------------------------------------------------------
-
-#ifndef wxUSE_NORLANDER_HEADERS
-#if (defined(__MINGW32__) || defined(__CYGWIN__)) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
-# define wxUSE_NORLANDER_HEADERS 1
-#else
-# define wxUSE_NORLANDER_HEADERS 0
-#endif
-#endif
-
-// wxUSE_DEBUG_NEW_ALWAYS doesn't work with CodeWarrior
-#if defined(__MWERKS__)
- #undef wxUSE_DEBUG_NEW_ALWAYS
- #define wxUSE_DEBUG_NEW_ALWAYS 0
-#endif
-
-#if defined(__GNUWIN32__)
-// These don't work as expected for mingw32 and cygwin32
-#undef wxUSE_MEMORY_TRACING
-#define wxUSE_MEMORY_TRACING 0
-
-#undef wxUSE_GLOBAL_MEMORY_OPERATORS
-#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-
-#undef wxUSE_DEBUG_NEW_ALWAYS
-#define wxUSE_DEBUG_NEW_ALWAYS 0
-
-// Cygwin betas don't have wcslen
-#if defined(__CYGWIN__) || defined(__CYGWIN32__)
-# if ! ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
-# undef wxUSE_WCHAR_T
-# define wxUSE_WCHAR_T 0
-# endif
-#endif
-
-#endif // __GNUWIN32__
-
-// MFC duplicates these operators
-#if wxUSE_MFC
-#undef wxUSE_GLOBAL_MEMORY_OPERATORS
-#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-
-#undef wxUSE_DEBUG_NEW_ALWAYS
-#define wxUSE_DEBUG_NEW_ALWAYS 0
-#endif // wxUSE_MFC
-
-#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !wxUSE_NORLANDER_HEADERS)
-// Can't use OLE drag and drop in Windows 3.1 because we don't know how
-// to implement UUIDs
-// GnuWin32 doesn't have appropriate headers for e.g. IUnknown.
-#undef wxUSE_DRAG_AND_DROP
-#define wxUSE_DRAG_AND_DROP 0
-#endif
-
-// Only WIN32 supports wxStatusBar95
-#if !defined(__WIN32__) && wxUSE_NATIVE_STATUSBAR
-#undef wxUSE_NATIVE_STATUSBAR
-#define wxUSE_NATIVE_STATUSBAR 0
-#endif
-
-#if !wxUSE_OWNER_DRAWN
-#undef wxUSE_CHECKLISTBOX
-#define wxUSE_CHECKLISTBOX 0
-#endif
-
-// Salford C++ doesn't like some of the memory operator definitions
-#ifdef __SALFORDC__
-#undef wxUSE_MEMORY_TRACING
-#define wxUSE_MEMORY_TRACING 0
-
-#undef wxUSE_GLOBAL_MEMORY_OPERATORS
-#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
-
-#undef wxUSE_DEBUG_NEW_ALWAYS
-#define wxUSE_DEBUG_NEW_ALWAYS 0
-
-#undef wxUSE_THREADS
-#define wxUSE_THREADS 0
-
-#undef wxUSE_OWNER_DRAWN
-#define wxUSE_OWNER_DRAWN 0
-#endif // __SALFORDC__
-
-#ifdef __TWIN32__
-
-#undef wxUSE_THREADS
-#define wxUSE_THREADS 0
-
-#undef wxUSE_ODBC
-#define wxUSE_ODBC 0
-
-#endif // __TWIN32__
-
-// BC++/Win16 can't cope with the amount of data in resource.cpp
-#if defined(__WIN16__) && defined(__BORLANDC__)
-#undef wxUSE_WX_RESOURCES
-#define wxUSE_WX_RESOURCES 0
-
-#undef wxUSE_ODBC
-#define wxUSE_ODBC 0
-
-#undef wxUSE_NEW_GRID
-#define wxUSE_NEW_GRID 0
-#endif
-
-#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
-// BC++ 4.0 can't compile JPEG library
-#undef wxUSE_LIBJPEG
-#define wxUSE_LIBJPEG 0
-#endif
-
-// wxUSE_DEBUG_NEW_ALWAYS = 1 not compatible with BC++ in DLL mode
-#if defined(__BORLANDC__) && (defined(WXMAKINGDLL) || defined(WXUSINGDLL))
-#undef wxUSE_DEBUG_NEW_ALWAYS
-#define wxUSE_DEBUG_NEW_ALWAYS 0
-#endif
-
-#if defined(__WXMSW__) && defined(__WATCOMC__)
-/*
-#undef wxUSE_GLCANVAS
-#define wxUSE_GLCANVAS 0
-*/
-
-#undef wxUSE_WCHAR_T
-#define wxUSE_WCHAR_T 0
-#endif
-
-#if defined(__WXMSW__) && !defined(__WIN32__)
-
-#undef wxUSE_SOCKETS
-#define wxUSE_SOCKETS 0
-
-#undef wxUSE_THREADS
-#define wxUSE_THREADS 0
-
-#undef wxUSE_TOOLTIPS
-#define wxUSE_TOOLTIPS 0
-
-#undef wxUSE_SPINCTRL
-#define wxUSE_SPINCTRL 0
-
-#undef wxUSE_SPINBTN
-#define wxUSE_SPINBTN 0
-
-#undef wxUSE_LIBPNG
-#define wxUSE_LIBPNG 0
-
-#undef wxUSE_LIBJPEG
-#define wxUSE_LIBJPEG 0
-
-#undef wxUSE_LIBTIFF
-#define wxUSE_LIBTIFF 0
-
-#undef wxUSE_GIF
-#define wxUSE_GIF 0
-
-#undef wxUSE_PNM
-#define wxUSE_PNM 0
-
-#undef wxUSE_PCX
-#define wxUSE_PCX 0
-
-#undef wxUSE_GLCANVAS
-#define wxUSE_GLCANVAS 0
-
-#undef wxUSE_MS_HTML_HELP
-#define wxUSE_MS_HTML_HELP 0
-
-#undef wxUSE_WCHAR_T
-#define wxUSE_WCHAR_T 0
-
-#endif // Win16
-
#endif
// _WX_SETUP_H_
projects / wxWidgets.git / blobdiff