don't make read-only text controls editable when enabled

[wxWidgets.git] / docs / latex / wx / log.tex

diff --git a/docs/latex/wx/log.tex b/docs/latex/wx/log.tex
index 1a883331827a664282740b1b42411384b1e59e8f..77e8803c118276f0e2694b146c23b62d01c8a550 100644 (file)
--- a/docs/latex/wx/log.tex
+++ b/docs/latex/wx/log.tex
@@ -11,7 +11,7 @@
 
 \section{\class{wxLog}}\label{wxlog}
 
 
 \section{\class{wxLog}}\label{wxlog}
 

-wxLog class defines the interface for the {\it log targets} used by wxWindows
+wxLog class defines the interface for the {\it log targets} used by wxWidgets

 logging functions as explained in the \helpref{wxLog overview}{wxlogoverview}.
 The only situations when you need to directly use this class is when you want
 to derive your own log target because the existing ones don't satisfy your
 logging functions as explained in the \helpref{wxLog overview}{wxlogoverview}.
 The only situations when you need to directly use this class is when you want
 to derive your own log target because the existing ones don't satisfy your


@@ -23,7 +23,7 @@ completely) the timestamp on the messages.
 Otherwise, it is completely hidden behind the {\it wxLogXXX()} functions and
 you may not even know about its existence.
 
 Otherwise, it is completely hidden behind the {\it wxLogXXX()} functions and
 you may not even know about its existence.
 

-See \helpref{log overview}{wxlogoverview} for the descriptions of wxWindows
+See \helpref{log overview}{wxlogoverview} for the descriptions of wxWidgets

 logging facilities.
 
 \wxheading{Derived from}
 logging facilities.
 
 \wxheading{Derived from}


@@ -36,7 +36,7 @@ No base class
 
 \latexignore{\rtfignore{\wxheading{Function groups}}}
 
 
 \latexignore{\rtfignore{\wxheading{Function groups}}}
 

-\membersection{Static functions}
+\membersection{Global functions}

 
 The functions in this section work with and manipulate the active log target.
 The \helpref{OnLog()}{wxlogonlog} is called by the {\it wxLogXXX()} functions
 
 The functions in this section work with and manipulate the active log target.
 The \helpref{OnLog()}{wxlogonlog} is called by the {\it wxLogXXX()} functions


@@ -54,10 +54,10 @@ situations because it may easily lead to a loss of messages.
 \helpref{Suspend}{wxlogsuspend}\\
 \helpref{Resume}{wxlogresume}
 
 \helpref{Suspend}{wxlogsuspend}\\
 \helpref{Resume}{wxlogresume}
 

-\membersection{Logging functions}
+\membersection{Logging functions}\label{loggingfunctions}

 
 There are two functions which must be implemented by any derived class to
 
 There are two functions which must be implemented by any derived class to

-actually process the log messages: \helpref{DoLog}{wxlogdolog} and 
+actually process the log messages: \helpref{DoLog}{wxlogdolog} and

 \helpref{DoLogString}{wxlogdologstring}. The second function receives a string
 which just has to be output in some way and the easiest way to write a new log
 target is to override just this function in the derived class. If more control
 \helpref{DoLogString}{wxlogdologstring}. The second function receives a string
 which just has to be output in some way and the easiest way to write a new log
 target is to override just this function in the derived class. If more control


@@ -72,15 +72,12 @@ night in the current time zone).
 There also functions to support message buffering. Why are they needed?
 Some of wxLog implementations, most notably the standard wxLogGui class,
 buffer the messages (for example, to avoid showing the user a zillion of modal
 There also functions to support message buffering. Why are they needed?
 Some of wxLog implementations, most notably the standard wxLogGui class,
 buffer the messages (for example, to avoid showing the user a zillion of modal

-message boxes one after another - which would be really annoying). 
+message boxes one after another -- which would be really annoying).

 \helpref{Flush()}{wxlogflush} shows them all and clears the buffer contents.
 \helpref{Flush()}{wxlogflush} shows them all and clears the buffer contents.

-Although this function doesn't do anything if the buffer is already empty,
-\helpref{HasPendingMessages()}{wxloghaspendingmessages} is also provided which
-allows to explicitly verify it.
+This function doesn't do anything if the buffer is already empty.

 
 \helpref{Flush}{wxlogflush}\\
 
 \helpref{Flush}{wxlogflush}\\

-\helpref{FlushActive}{wxlogflushactive}\\
-\helpref{HasPendingMessages}{wxloghaspendingmessages}
+\helpref{FlushActive}{wxlogflushactive}

 
 \membersection{Customization}\label{wxlogcustomization}
 
 
 \membersection{Customization}\label{wxlogcustomization}
 


@@ -96,9 +93,9 @@ problem.
 
 As for the (real) trace messages, their handling depends on the settings of
 the (application global) {\it trace mask}. There are two ways to specify it:
 
 As for the (real) trace messages, their handling depends on the settings of
 the (application global) {\it trace mask}. There are two ways to specify it:

-either by using \helpref{SetTraceMask}{wxlogsettracemask} and 
-\helpref{GetTraceMask}{wxloggettracemask} and using 
-\helpref{wxLogTrace}{wxlogtrace} which takes an integer mask or by using 
+either by using \helpref{SetTraceMask}{wxlogsettracemask} and
+\helpref{GetTraceMask}{wxloggettracemask} and using
+\helpref{wxLogTrace}{wxlogtrace} which takes an integer mask or by using

 \helpref{AddTraceMask}{wxlogaddtracemask} for string trace masks.
 
 The difference between bit-wise and string trace masks is that a message using
 \helpref{AddTraceMask}{wxlogaddtracemask} for string trace masks.
 
 The difference between bit-wise and string trace masks is that a message using


@@ -112,7 +109,7 @@ For example,
 // wxTraceOleCalls is one of standard bit masks
 wxLogTrace(wxTraceRefCount | wxTraceOleCalls, "Active object ref count: %d", nRef);
 \end{verbatim}
 // wxTraceOleCalls is one of standard bit masks
 wxLogTrace(wxTraceRefCount | wxTraceOleCalls, "Active object ref count: %d", nRef);
 \end{verbatim}

-will do something only if the current trace mask contains both 
+will do something only if the current trace mask contains both

 {\tt wxTraceRefCount} and {\tt wxTraceOle}, but
 
 \begin{verbatim}
 {\tt wxTraceRefCount} and {\tt wxTraceOle}, but
 
 \begin{verbatim}


@@ -131,7 +128,7 @@ the preferred way of working with trace messages. The integer trace mask is
 kept for compatibility and for additional (but very rarely needed) flexibility
 only.
 
 kept for compatibility and for additional (but very rarely needed) flexibility
 only.
 

-The standard trace masks are given in \helpref{wxLogTrace}{wxlogtrace} 
+The standard trace masks are given in \helpref{wxLogTrace}{wxlogtrace}

 documentation.
 
 Finally, the {\it wxLog::DoLog()} function automatically prepends a time stamp
 documentation.
 
 Finally, the {\it wxLog::DoLog()} function automatically prepends a time stamp


@@ -145,7 +142,7 @@ format disables timestamping of the messages completely.
 {\bf NB:} Timestamping is disabled for Visual C++ users in debug builds by
 default because otherwise it would be impossible to directly go to the line
 from which the log message was generated by simply clicking in the debugger
 {\bf NB:} Timestamping is disabled for Visual C++ users in debug builds by
 default because otherwise it would be impossible to directly go to the line
 from which the log message was generated by simply clicking in the debugger

-window on the corresponding error message. If you wish to enable it, please use 
+window on the corresponding error message. If you wish to enable it, please use

 \helpref{SetTimestamp}{wxlogsettimestamp} explicitly.
 
 \helpref{AddTraceMask}{wxlogaddtracemask}\\
 \helpref{SetTimestamp}{wxlogsettimestamp} explicitly.
 
 \helpref{AddTraceMask}{wxlogaddtracemask}\\


@@ -158,7 +155,9 @@ window on the corresponding error message. If you wish to enable it, please use
 \helpref{SetTimestamp}{wxlogsettimestamp}\\
 \helpref{GetTimestamp}{wxloggettimestamp}\\
 \helpref{SetTraceMask}{wxlogsettracemask}\\
 \helpref{SetTimestamp}{wxlogsettimestamp}\\
 \helpref{GetTimestamp}{wxloggettimestamp}\\
 \helpref{SetTraceMask}{wxlogsettracemask}\\

-\helpref{GetTraceMask}{wxloggettracemask}
+\helpref{GetTraceMask}{wxloggettracemask}\\
+\helpref{SetRepetitionCounting}{wxlogsetrepetitioncounting}\\
+\helpref{GetRepetitionCounting}{wxloggetrepetitioncounting}

 
 %%%%% MEMBERS HERE %%%%%
 \helponly{\insertatlevel{2}{
 
 %%%%% MEMBERS HERE %%%%%
 \helponly{\insertatlevel{2}{


@@ -171,10 +170,11 @@ window on the corresponding error message. If you wish to enable it, please use
 
 \func{static void}{AddTraceMask}{\param{const wxString\& }{mask}}
 
 
 \func{static void}{AddTraceMask}{\param{const wxString\& }{mask}}
 

-Add the {\it mask} to the list of allowed masks for 
+Add the {\it mask} to the list of allowed masks for

 \helpref{wxLogTrace}{wxlogtrace}.
 
 \wxheading{See also}
 \helpref{wxLogTrace}{wxlogtrace}.
 
 \wxheading{See also}

+

 \helpref{RemoveTraceMask}{wxlogremovetracemask}
 \helpref{GetTraceMasks}{wxloggettracemasks}
 
 \helpref{RemoveTraceMask}{wxlogremovetracemask}
 \helpref{GetTraceMasks}{wxloggettracemasks}
 


@@ -182,24 +182,26 @@ Add the {\it mask} to the list of allowed masks for
 
 \func{static void}{ClearTraceMasks}{\void}
 
 
 \func{static void}{ClearTraceMasks}{\void}
 

-Removes all trace masks previously set with 
+Removes all trace masks previously set with

 \helpref{AddTraceMask}{wxlogaddtracemask}.
 
 \wxheading{See also}
 \helpref{AddTraceMask}{wxlogaddtracemask}.
 
 \wxheading{See also}

+

 \helpref{RemoveTraceMask}{wxlogremovetracemask}
 
 \membersection{wxLog::GetTraceMasks}\label{wxloggettracemasks}
 
 \helpref{RemoveTraceMask}{wxlogremovetracemask}
 
 \membersection{wxLog::GetTraceMasks}\label{wxloggettracemasks}
 

-\func{static const wxArrayString &}{GetTraceMasks}{\void}
+\func{static const wxArrayString \&}{GetTraceMasks}{\void}

 
 Returns the currently allowed list of string trace masks.
 
 \wxheading{See also}
 
 Returns the currently allowed list of string trace masks.
 
 \wxheading{See also}

+

 \helpref{AddTraceMask}{wxlogaddtracemask}.
 
 \membersection{wxLog::OnLog}\label{wxlogonlog}
 
 \helpref{AddTraceMask}{wxlogaddtracemask}.
 
 \membersection{wxLog::OnLog}\label{wxlogonlog}
 

-\func{static void}{OnLog}{\param{wxLogLevel }{ level}, \param{const char * }{ message}}
+\func{static void}{OnLog}{\param{wxLogLevel }{ level}, \param{const wxString\& }{ message}}

 
 Forwards the message at specified level to the {\it DoLog()} function of the
 active log target if there is any, does nothing otherwise.
 
 Forwards the message at specified level to the {\it DoLog()} function of the
 active log target if there is any, does nothing otherwise.


@@ -215,7 +217,9 @@ Returns the pointer to the active log target (may be NULL).
 \func{static wxLog *}{SetActiveTarget}{\param{wxLog * }{ logtarget}}
 
 Sets the specified log target as the active one. Returns the pointer to the
 \func{static wxLog *}{SetActiveTarget}{\param{wxLog * }{ logtarget}}
 
 Sets the specified log target as the active one. Returns the pointer to the

-previous active log target (may be NULL).
+previous active log target (may be NULL).  To suppress logging use a new
+instance of wxLogNull not NULL.  If the active log target is set to NULL a
+new default log target will be created when logging occurs.

 
 \membersection{wxLog::Suspend}\label{wxlogsuspend}
 
 
 \membersection{wxLog::Suspend}\label{wxlogsuspend}
 


@@ -231,7 +235,7 @@ logging immediately without waiting for \helpref{Flush}{wxlogflush} to be
 called (the standard GUI log target only shows the log dialog when it is
 flushed, so Suspend() works as expected with it).
 
 called (the standard GUI log target only shows the log dialog when it is
 flushed, so Suspend() works as expected with it).
 

-\wxheading{See also:}
+\wxheading{See also}

 
 \helpref{Resume}{wxlogresume},\\
 \helpref{wxLogNull}{wxlogoverview}
 
 \helpref{Resume}{wxlogresume},\\
 \helpref{wxLogNull}{wxlogoverview}


@@ -240,30 +244,30 @@ flushed, so Suspend() works as expected with it).
 
 \func{static void}{Resume}{\void}
 
 
 \func{static void}{Resume}{\void}
 

-Resumes logging previously suspended by a call to 
+Resumes logging previously suspended by a call to

 \helpref{Suspend}{wxlogsuspend}. All messages logged in the meanwhile will be
 flushed soon.
 
 \membersection{wxLog::DoLog}\label{wxlogdolog}
 
 \helpref{Suspend}{wxlogsuspend}. All messages logged in the meanwhile will be
 flushed soon.
 
 \membersection{wxLog::DoLog}\label{wxlogdolog}
 

-\func{virtual void}{DoLog}{\param{wxLogLevel }{level}, \param{const wxChar }{*msg}, \param{time\_t }{timestamp}}
+\func{virtual void}{DoLog}{\param{wxLogLevel }{level}, \param{const wxString\& }{msg}, \param{time\_t }{timestamp}}

 
 Called to process the message of the specified severity. {\it msg} is the text
 of the message as specified in the call of {\it wxLogXXX()} function which
 generated it and {\it timestamp} is the moment when the message was generated.
 
 The base class version prepends the timestamp to the message, adds a prefix
 
 Called to process the message of the specified severity. {\it msg} is the text
 of the message as specified in the call of {\it wxLogXXX()} function which
 generated it and {\it timestamp} is the moment when the message was generated.
 
 The base class version prepends the timestamp to the message, adds a prefix

-corresponding to the log level and then calls 
+corresponding to the log level and then calls

 \helpref{DoLogString}{wxlogdologstring} with the resulting string.
 
 \membersection{wxLog::DoLogString}\label{wxlogdologstring}
 
 \helpref{DoLogString}{wxlogdologstring} with the resulting string.
 
 \membersection{wxLog::DoLogString}\label{wxlogdologstring}
 

-\func{virtual void}{DoLogString}{\param{const wxChar }{*msg}, \param{time\_t }{timestamp}}
+\func{virtual void}{DoLogString}{\param{const wxString\& }{msg}, \param{time\_t }{timestamp}}

 
 

-Called to log the specified string. The timestamp is already included into the
+Called to log the specified string. The timestamp is already included in the

 string but still passed to this function.
 
 string but still passed to this function.
 

-A simple implementation may just send the string to {\tt stdout} or, better, 
+A simple implementation may just send the string to {\tt stdout} or, better,

 {\tt stderr}.
 
 \membersection{wxLog::DontCreateOnDemand}\label{wxlogdontcreateondemand}
 {\tt stderr}.
 
 \membersection{wxLog::DontCreateOnDemand}\label{wxlogdontcreateondemand}


@@ -274,7 +278,7 @@ Instructs wxLog to not create new log targets on the fly if there is none
 currently. (Almost) for internal use only: it is supposed to be called by the
 application shutdown code.
 
 currently. (Almost) for internal use only: it is supposed to be called by the
 application shutdown code.
 

-Note that this function also calls 
+Note that this function also calls

 \helpref{ClearTraceMasks}{wxlogcleartracemasks}.
 
 \membersection{wxLog::Flush}\label{wxlogflush}
 \helpref{ClearTraceMasks}{wxlogcleartracemasks}.
 
 \membersection{wxLog::Flush}\label{wxlogflush}


@@ -290,20 +294,13 @@ is already empty, nothing happens.
 
 Flushes the current log target if any, does nothing if there is none.
 
 
 Flushes the current log target if any, does nothing if there is none.
 

-See also:
+\wxheading{See also}

 
 \helpref{Flush}{wxlogflush}
 
 
 \helpref{Flush}{wxlogflush}
 

-\membersection{wxLog::HasPendingMessages}\label{wxloghaspendingmessages}
-
-\constfunc{bool}{HasPendingMessages}{\void}
-
-Returns true if there are any messages in the buffer (not yet shown to the
-user). (Almost) for internal use only.
-

 \membersection{wxLog::SetVerbose}\label{wxlogsetverbose}
 
 \membersection{wxLog::SetVerbose}\label{wxlogsetverbose}
 

-\func{static void}{SetVerbose}{\param{bool }{ verbose = TRUE}}
+\func{static void}{SetVerbose}{\param{bool }{ verbose = true}}

 
 Activates or deactivates verbose mode in which the verbose messages are
 logged as the normal ones instead of being silently dropped.
 
 Activates or deactivates verbose mode in which the verbose messages are
 logged as the normal ones instead of being silently dropped.


@@ -314,6 +311,34 @@ logged as the normal ones instead of being silently dropped.
 
 Returns whether the verbose mode is currently active.
 
 
 Returns whether the verbose mode is currently active.
 

+\membersection{wxLog::SetLogLevel}\label{wxlogsetloglevel}
+
+\func{static void}{SetLogLevel}{\param{wxLogLevel }{ logLevel}}
+
+Specifies that log messages with $level > logLevel$ should be ignored
+and not sent to the active log target.
+
+\membersection{wxLog::GetLogLevel}\label{wxloggetloglevel}
+
+\func{static wxLogLevel}{GetLogLevel}{\void}
+
+Returns the current log level limit.
+
+\membersection{wxLog::SetRepetitionCounting}\label{wxlogsetrepetitioncounting}
+
+\func{static void}{SetRepetitionCounting}{\param{bool }{ repetCounting = true}}
+
+Enables logging mode in which a log message is logged once, and in case exactly
+the same message successively repeats one or more times, only the number of 
+repetitions is logged.
+
+\membersection{wxLog::GetRepetitionCounting}\label{wxloggetrepetitioncounting}
+
+\func{static bool}{GetRepetitionCounting}{\void}
+
+Returns whether the repetition counting mode is enabled.
+
+

 \membersection{wxLog::SetTimestamp}\label{wxlogsettimestamp}
 
 \func{void}{SetTimestamp}{\param{const char * }{ format}}
 \membersection{wxLog::SetTimestamp}\label{wxlogsettimestamp}
 
 \func{void}{SetTimestamp}{\param{const char * }{ format}}


@@ -343,19 +368,19 @@ for details.
 
 \membersection{wxLog::IsAllowedTraceMask}\label{wxlogisallowedtracemask}
 
 
 \membersection{wxLog::IsAllowedTraceMask}\label{wxlogisallowedtracemask}
 

-\func{static bool}{IsAllowedTraceMask}{\param{const wxChar *}{mask}}
+\func{static bool}{IsAllowedTraceMask}{\param{const wxString\& }{mask}}

 
 

-Returns TRUE if the {\it mask} is one of allowed masks for 
+Returns true if the {\it mask} is one of allowed masks for

 \helpref{wxLogTrace}{wxlogtrace}.
 
 \helpref{wxLogTrace}{wxlogtrace}.
 

-See also: \helpref{AddTraceMask}{wxlogaddtracemask}, 
+See also: \helpref{AddTraceMask}{wxlogaddtracemask},

 \helpref{RemoveTraceMask}{wxlogremovetracemask}
 
 \membersection{wxLog::RemoveTraceMask}\label{wxlogremovetracemask}
 
 \func{static void}{RemoveTraceMask}{\param{const wxString\& }{mask}}
 
 \helpref{RemoveTraceMask}{wxlogremovetracemask}
 
 \membersection{wxLog::RemoveTraceMask}\label{wxlogremovetracemask}
 
 \func{static void}{RemoveTraceMask}{\param{const wxString\& }{mask}}
 

-Remove the {\it mask} from the list of allowed masks for 
+Remove the {\it mask} from the list of allowed masks for

 \helpref{wxLogTrace}{wxlogtrace}.
 
 See also: \helpref{AddTraceMask}{wxlogaddtracemask}
 \helpref{wxLogTrace}{wxlogtrace}.
 
 See also: \helpref{AddTraceMask}{wxlogaddtracemask}


@@ -365,7 +390,7 @@ See also: \helpref{AddTraceMask}{wxlogaddtracemask}
 \section{\class{wxLogChain}}\label{wxlogchain}
 
 This simple class allows to chain log sinks, that is to install a new sink but
 \section{\class{wxLogChain}}\label{wxlogchain}
 
 This simple class allows to chain log sinks, that is to install a new sink but

-keep passing log messages to the old one instead of replacing it completely as 
+keep passing log messages to the old one instead of replacing it completely as

 \helpref{SetActiveTarget}{wxlogsetactivetarget} does.
 
 It is especially useful when you want to divert the logs somewhere (for
 \helpref{SetActiveTarget}{wxlogsetactivetarget} does.
 
 It is especially useful when you want to divert the logs somewhere (for


@@ -380,7 +405,9 @@ wxLogChain *logChain = new wxLogChain(new wxLogStderr);
 // all the log messages are sent to stderr and also processed as usually
 ...
 
 // all the log messages are sent to stderr and also processed as usually
 ...
 

-delete logChain;
+// don't delete logChain directly as this would leave a dangling
+// pointer as active log target, use SetActiveTarget() instead
+delete wxLog::SetActiveTarget(...something else or NULL...);

 
 \end{verbatim}
 
 
 \end{verbatim}
 


@@ -394,14 +421,14 @@ delete logChain;
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxLogChain::wxLogChain}\label{wxlogchainwxlogchain}
+\membersection{wxLogChain::wxLogChain}\label{wxlogchainctor}

 
 \func{}{wxLogChain}{\param{wxLog *}{logger}}
 
 Sets the specified {\tt logger} (which may be {\tt NULL}) as the default log
 target but the log messages are also passed to the previous log target if any.
 
 
 \func{}{wxLogChain}{\param{wxLog *}{logger}}
 
 Sets the specified {\tt logger} (which may be {\tt NULL}) as the default log
 target but the log messages are also passed to the previous log target if any.
 

-\membersection{wxLogChain::\destruct{wxLogChain}}
+\membersection{wxLogChain::\destruct{wxLogChain}}\label{wxlogchaindtor}

 
 \func{}{\destruct{wxLogChain}}{\void}
 
 
 \func{}{\destruct{wxLogChain}}{\void}
 


@@ -418,8 +445,8 @@ NULL}).
 
 \constfunc{bool}{IsPassingMessages}{\void}
 
 
 \constfunc{bool}{IsPassingMessages}{\void}
 

-Returns {\tt TRUE} if the messages are passed to the previously active log
-target (default) or {\tt FALSE} if \helpref{PassMessages}{wxlogchainpassmessages} 
+Returns {\tt true} if the messages are passed to the previously active log
+target (default) or {\tt false} if \helpref{PassMessages}{wxlogchainpassmessages}

 had been called.
 
 \membersection{wxLogChain::PassMessages}\label{wxlogchainpassmessages}
 had been called.
 
 \membersection{wxLogChain::PassMessages}\label{wxlogchainpassmessages}


@@ -427,17 +454,17 @@ had been called.
 \func{void}{PassMessages}{\param{bool }{passMessages}}
 
 By default, the log messages are passed to the previously active log target.
 \func{void}{PassMessages}{\param{bool }{passMessages}}
 
 By default, the log messages are passed to the previously active log target.

-Calling this function with {\tt FALSE} parameter disables this behaviour
+Calling this function with {\tt false} parameter disables this behaviour

 (presumably temporarily, as you shouldn't use wxLogChain at all otherwise) and
 it can be reenabled by calling it again with {\it passMessages} set to {\tt
 (presumably temporarily, as you shouldn't use wxLogChain at all otherwise) and
 it can be reenabled by calling it again with {\it passMessages} set to {\tt

-TRUE}.
+true}.

 
 \membersection{wxLogChain::SetLog}\label{wxlogchainsetlog}
 
 \func{void}{SetLog}{\param{wxLog *}{logger}}
 
 Sets another log target to use (may be {\tt NULL}). The log target specified
 
 \membersection{wxLogChain::SetLog}\label{wxlogchainsetlog}
 
 \func{void}{SetLog}{\param{wxLog *}{logger}}
 
 Sets another log target to use (may be {\tt NULL}). The log target specified

-in the \helpref{constructor}{wxlogchainwxlogchain} or in a previous call to
+in the \helpref{constructor}{wxlogchainctor} or in a previous call to

 this function is deleted.
 
 This doesn't change the old log target value (the one the messages are
 this function is deleted.
 
 This doesn't change the old log target value (the one the messages are


@@ -448,9 +475,9 @@ object was created.
 
 \section{\class{wxLogGui}}\label{wxloggui}
 
 
 \section{\class{wxLogGui}}\label{wxloggui}
 

-This is the default log target for the GUI wxWindows applications. It is passed
+This is the default log target for the GUI wxWidgets applications. It is passed

 to \helpref{wxLog::SetActiveTarget}{wxlogsetactivetarget} at the program
 to \helpref{wxLog::SetActiveTarget}{wxlogsetactivetarget} at the program

-startup and is deleted by wxWindows during the program shut down.
+startup and is deleted by wxWidgets during the program shut down.

 
 \wxheading{Derived from}
 
 
 \wxheading{Derived from}
 


@@ -462,7 +489,7 @@ startup and is deleted by wxWindows during the program shut down.
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxLogGui::wxLogGui}
+\membersection{wxLogGui::wxLogGui}\label{wxlogguictor}

 
 \func{}{wxLogGui}{\void}
 
 
 \func{}{wxLogGui}{\void}
 


@@ -475,7 +502,7 @@ Default constructor.
 This class allows to temporarily suspend logging. All calls to the log
 functions during the life time of an object of this class are just ignored.
 
 This class allows to temporarily suspend logging. All calls to the log
 functions during the life time of an object of this class are just ignored.
 

-In particular, it can be used to suppress the log messages given by wxWindows
+In particular, it can be used to suppress the log messages given by wxWidgets

 itself but it should be noted that it is rarely the best way to cope with this
 problem as {\bf all} log messages are suppressed, even if they indicate a
 completely different error than the one the programmer wanted to suppress.
 itself but it should be noted that it is rarely the best way to cope with this
 problem as {\bf all} log messages are suppressed, even if they indicate a
 completely different error than the one the programmer wanted to suppress.


@@ -495,7 +522,7 @@ For instance, the example of the overview:
 
   wxLogMessage("..."); // ok
 \end{verbatim}
 
   wxLogMessage("..."); // ok
 \end{verbatim}

-}
+}%

 
 would be better written as:
 
 
 would be better written as:
 


@@ -515,7 +542,7 @@ would be better written as:
       ...
   }
 \end{verbatim}
       ...
   }
 \end{verbatim}

-}
+}%

 
 \wxheading{Derived from}
 
 
 \wxheading{Derived from}
 


@@ -527,13 +554,13 @@ would be better written as:
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxLogNull::wxLogNull}
+\membersection{wxLogNull::wxLogNull}\label{wxlognullctor}

 
 \func{}{wxLogNull}{\void}
 
 Suspends logging.
 
 
 \func{}{wxLogNull}{\void}
 
 Suspends logging.
 

-\membersection{wxLogNull::\destruct{wxLogNull}}
+\membersection{wxLogNull::\destruct{wxLogNull}}\label{wxlognulldtor}

 
 Resumes logging.
 
 
 Resumes logging.
 


@@ -547,7 +574,7 @@ forwards the log messages to the previously installed one in addition to
 processing them itself.
 
 Unlike \helpref{wxLogChain}{wxlogchain} which is usually used directly as is,
 processing them itself.
 
 Unlike \helpref{wxLogChain}{wxlogchain} which is usually used directly as is,

-this class must be derived from to implement \helpref{DoLog}{wxlogdolog} 
+this class must be derived from to implement \helpref{DoLog}{wxlogdolog}

 and/or \helpref{DoLogString}{wxlogdologstring} methods.
 
 \wxheading{Derived from}
 and/or \helpref{DoLogString}{wxlogdologstring} methods.
 
 \wxheading{Derived from}


@@ -570,7 +597,7 @@ Default ctor installs this object as the current active log target.
 
 This class can be used to redirect the log messages to a C file stream (not to
 be confused with C++ streams). It is the default log target for the non-GUI
 
 This class can be used to redirect the log messages to a C file stream (not to
 be confused with C++ streams). It is the default log target for the non-GUI

-wxWindows applications which send all the output to {\tt stderr}.
+wxWidgets applications which send all the output to {\tt stderr}.

 
 \wxheading{Derived from}
 
 
 \wxheading{Derived from}
 


@@ -586,11 +613,11 @@ wxWindows applications which send all the output to {\tt stderr}.
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxLogStderr::wxLogStderr}
+\membersection{wxLogStderr::wxLogStderr}\label{wxlogstderrctor}

 
 \func{}{wxLogStderr}{\param{FILE }{*fp = NULL}}
 
 
 \func{}{wxLogStderr}{\param{FILE }{*fp = NULL}}
 

-Constructs a log target which sends all the log messages to the given 
+Constructs a log target which sends all the log messages to the given

 {\tt FILE}. If it is {\tt NULL}, the messages are sent to {\tt stderr}.
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% wxLogStream %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 {\tt FILE}. If it is {\tt NULL}, the messages are sent to {\tt stderr}.
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% wxLogStream %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


@@ -599,7 +626,7 @@ Constructs a log target which sends all the log messages to the given
 
 This class can be used to redirect the log messages to a C++ stream.
 
 
 This class can be used to redirect the log messages to a C++ stream.
 

-Please note that this class is only available if wxWindows was compiled with
+Please note that this class is only available if wxWidgets was compiled with

 the standard iostream library support ({\tt wxUSE\_STD\_IOSTREAM} must be on).
 
 \wxheading{Derived from}
 the standard iostream library support ({\tt wxUSE\_STD\_IOSTREAM} must be on).
 
 \wxheading{Derived from}


@@ -617,11 +644,11 @@ the standard iostream library support ({\tt wxUSE\_STD\_IOSTREAM} must be on).
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxLogStream::wxLogStream}
+\membersection{wxLogStream::wxLogStream}\label{wxlogstreamctor}

 
 \func{}{wxLogStream}{\param{std::ostream }{*ostr = NULL}}
 
 
 \func{}{wxLogStream}{\param{std::ostream }{*ostr = NULL}}
 

-Constructs a log target which sends all the log messages to the given 
+Constructs a log target which sends all the log messages to the given

 output stream. If it is {\tt NULL}, the messages are sent to {\tt cerr}.
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% wxLogTextCtrl %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 output stream. If it is {\tt NULL}, the messages are sent to {\tt cerr}.
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% wxLogTextCtrl %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


@@ -642,12 +669,12 @@ caller previously.
 
 \wxheading{See also}
 
 
 \wxheading{See also}
 

-\helpref{wxLogTextCtrl}{wxlogtextctrl},\\
+\helpref{wxTextCtrl}{wxtextctrl},\\

 \helpref{wxStreamToTextRedirector}{wxstreamtotextredirector}
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 \helpref{wxStreamToTextRedirector}{wxstreamtotextredirector}
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxLogTextCtrl::wxLogTextCtrl}
+\membersection{wxLogTextCtrl::wxLogTextCtrl}\label{wxlogtextctrlctor}

 
 \func{}{wxLogTextCtrl}{\param{wxTextCtrl }{*textctrl}}
 
 
 \func{}{wxLogTextCtrl}{\param{wxTextCtrl }{*textctrl}}
 


@@ -678,9 +705,9 @@ them normally by showing the standard log dialog.
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 

-\membersection{wxLogWindow::wxLogWindow}
+\membersection{wxLogWindow::wxLogWindow}\label{wxlogwindowctor}

 
 

-\func{}{wxLogWindow}{\param{wxFrame }{*parent}, \param{const wxChar }{*title}, \param{bool }{show = {\tt TRUE}}, \param{bool }{passToOld = {\tt TRUE}}}
+\func{}{wxLogWindow}{\param{wxFrame }{*parent}, \param{const wxChar }{*title}, \param{bool }{show = {\tt true}}, \param{bool }{passToOld = {\tt true}}}

 
 Creates the log frame window and starts collecting the messages in it.
 
 
 Creates the log frame window and starts collecting the messages in it.
 


@@ -690,27 +717,27 @@ Creates the log frame window and starts collecting the messages in it.
 
 \docparam{title}{The title for the log frame}
 
 
 \docparam{title}{The title for the log frame}
 

-\docparam{show}{{\tt TRUE} to show the frame initially (default), otherwise 
+\docparam{show}{{\tt true} to show the frame initially (default), otherwise

 \helpref{wxLogWindow::Show}{wxlogwindowshow} must be called later.}
 
 \helpref{wxLogWindow::Show}{wxlogwindowshow} must be called later.}
 

-\docparam{passToOld}{{\tt TRUE} to process the log messages normally in addition to
-logging them in the log frame (default), {\tt FALSE} to only log them in the
+\docparam{passToOld}{{\tt true} to process the log messages normally in addition to
+logging them in the log frame (default), {\tt false} to only log them in the

 log frame.}
 
 \membersection{wxLogWindow::Show}\label{wxlogwindowshow}
 
 log frame.}
 
 \membersection{wxLogWindow::Show}\label{wxlogwindowshow}
 

-\func{void}{Show}{\param{bool }{show = {\tt TRUE}}}
+\func{void}{Show}{\param{bool }{show = {\tt true}}}

 
 Shows or hides the frame.
 
 
 Shows or hides the frame.
 

-\membersection{wxLogWindow::GetFrame}
+\membersection{wxLogWindow::GetFrame}\label{wxlogwindowgetframe}

 
 \constfunc{wxFrame *}{GetFrame}{\void}
 
 Returns the associated log frame window. This may be used to position or resize
 it but use \helpref{wxLogWindow::Show}{wxlogwindowshow} to show or hide it.
 
 
 \constfunc{wxFrame *}{GetFrame}{\void}
 
 Returns the associated log frame window. This may be used to position or resize
 it but use \helpref{wxLogWindow::Show}{wxlogwindowshow} to show or hide it.
 

-\membersection{wxLogWindow::OnFrameCreate}
+\membersection{wxLogWindow::OnFrameCreate}\label{wxlogwindowonframecreate}

 
 \func{virtual void}{OnFrameCreate}{\param{wxFrame }{*frame}}
 
 
 \func{virtual void}{OnFrameCreate}{\param{wxFrame }{*frame}}
 


@@ -719,13 +746,13 @@ any extra initializations.
 
 \membersection{wxLogWindow::OnFrameClose}\label{wxlogwindowonframeclose}
 
 
 \membersection{wxLogWindow::OnFrameClose}\label{wxlogwindowonframeclose}
 

-\func{virtual void}{OnFrameClose}{\param{wxFrame }{*frame}}
+\func{virtual bool}{OnFrameClose}{\param{wxFrame }{*frame}}

 
 Called if the user closes the window interactively, will not be
 called if it is destroyed for another reason (such as when program
 exits).
 
 
 Called if the user closes the window interactively, will not be
 called if it is destroyed for another reason (such as when program
 exits).
 

-Return {\tt TRUE} from here to allow the frame to close, {\tt FALSE} to
+Return {\tt true} from here to allow the frame to close, {\tt false} to

 prevent this from happening.
 
 \wxheading{See also}
 prevent this from happening.
 
 \wxheading{See also}